Section L MIL-DTL Micro-D Connectors

Transcription

1 Section MI-DT-353 Micro-D Connectors Micro-D MI-DT-353 product selection guide Glenair s Complete Micro-D Product ine includes all M353 Micro-D connectors. Choose Solder Cup, Pre-Wired or PCB versions. Glenair M353 connectors always use TwistPin Contacts for high performance, made in U.S.A. M353/0, /02, /0, /07 Solder Cup Metal or Plastic Shell These connectors feature gold-plated solder cup contacts for termination to #2 AWG or smaller wire. M353/03, /04, /0, /0 Pre-Wired Pigtails, Metal or Plastic Shell These crimped, epoxy-potted assemblies are available with insulated strand #2 AWG wire or with #25 AWG uninsulated single strand wire. Insulated wire options include wire type, color code and length. Uninsulated wires are gold-plated or SnPb 3/37 solder dipped. Metal Shell M353/0 & 02 Page -4 Plastic Shell M353/0 & 07 Page - Metal Shell M353/03 & 04 Page -5 Plastic Shell M353/0 & 0 Page - M353/05 Jackscrews and Jackposts These hardware kits contain stainless steel jackscrews in two lengths. Choose slot head or hex head. Jackscrews attach with e-rings. Jackposts also are stainless steel. M353/05 Hardware Kits Page -7 M353/0 Thru 2 Right Angle.00" Pitch Printed Circuit Board Connectors These metal shell connectors feature SnPb 3/37 solder-dipped PC tails. Select vertical or right angle mounting. PC tails are.0 inch (0.50 ) diameter on a.00 inch (2.54 ) offset grid. Jackposts and threaded inserts are available. M353/0 to 5 Right Angle Narrow PCB Page - M353/ to 2 Right Angle Wide Style PCB Page -5 M353/ Thru 33 Vertical Compact Vertical Mount Printed Circuit Board These recent additions to the mil spec feature.075 inch by.00 inch PC terminal spacing. The plastic tray does not extend beyond the envelope of the metal connector shell. M353/ to 27 Vertical Mount PCB Page - M353/2 Thru 33 Compact Vertical PCB Page -23 Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

2 Micro-D MI-DT-353 MI-DT-353 Micro-D Connectors DETAI SPECIFICATION CONNECTORS, EECTRICA, RECTANGUAR, MICROMINIATURE, POARIZED SHE, GENERA SPECIFICATION FOR This specification is approved for use by all Departments and Agencies of the Department of Defense. INCH-POUND MI-DT-353E 2 May 02 SUPERSEDING MI-PRF-353D April 7. SCOPE. Scope. This specification covers polarized shell, microminiature, rectangular connectors..2 Classification..2. Class P - All plastic (shell and insulator) M - Metal shell (plastic insulator).2.2 Type I - Crimp contacts (nonremovable) II - S older contacts (nonremovable) 2. APPICABE DOCUMENTS 2. General. The documents listed in this section are specified in sections 3 and 4 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this standard, whether or not they are listed. 2.2 Government documents Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see.2). Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Supply Center Columbus, ATTN: DSCC-VAI, 30 East Broad Street, Columbus, OH by using the Standardization Document Improvement Proposal (DD Form 42) appearing at the end of this document or by letter. AMSC N/A FSC 535 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. What is the difference between a Glenair COTS Micro-D and a Glenair Mil Spec Micro-D? Which is less expensive? All Glenair Micro-D's, whether mil spec or COTS, are built with the same components and meet identical requirements. A COTS Micro-D is not a lower cost version of a mil spec part. COTS versions offer more options than the mil spec versions. Which is more readily available: Mil Spec or COTS? All M353 aluminum shell connectors are in stock. All standard COTS versions are also stocked. What is the difference between a Glenair Mil Spec connector and another brand? MI-DT-353 allows the use of low-cost stamped contacts; however, the Glenair Micro-D connector features the high performancetwistpin contact system. Glenair M353 connectors are 00% Made in USA. Glenair's industry-leading Micro-D capacity and capabilities offer quick worldwide access to the full range of QP items. MI-DT-353 At-A-Glance About The Mil Spec The United States Department of Defense, Defense ogistics Agency, Defense Supply Center, Columbus, Ohio (DSCC, pronounced "Dessy"), maintains a vast library of military specifications covering all kinds of components used in defense equipment. These mil specs simplify system design and procurement, because mil spec parts do not require costly testing for suitability. Easy multiple sourcing is another key advantage of a mil spec part. MI-DT-353 is a detail spec controlling dimensions, materials, performance and testing. This spec covers plastic and metal shell Micro-D connectors. The QP At-A-Glance Manufacturers are required to perform a series of mechanical, electrical and environmental tests in order to be eligible for listing as an approved supplier. When DSCC approval is granted, the manufacturer is added to the Qualified Products ist (QP). Glenair is QP approved for all M353 variations. The "Slash Sheets" At-A-Glance In addition to the general specification, MI-DT-353 contains a total of 33 Detail Specification Sheets, nicknamed "slash sheets" because a forward slash is used in the numbering system. How to get a copy of the spec DSCC specs are available for download. The documents include: MI-DT-353 Detail Specification (the general spec) MI-DT-353 Slash Sheets (33 individual specs) These specs can be found at: asp The QP can be found at: Glenair CAGE Codes A CAGE (Commercial And Government Entity) Code is a five position code that identifies companies doing or wishing to do business with the Federal Government. Glenair uses two CAGE codes to identify M353 products: 0324, Glenair, Glendale, California 0CA77, Glenair Microway Division, incolnwood Illinois. Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

3 MI-DT-353 Micro-D Connectors Micro-D MI-DT-353 MI-dtl-353 contact arrangements (face view pin connector) Contacts 5 Contacts 2 Contacts 25 Contacts 3 Contacts Contacts 5 Contacts 00 Contacts mil-dtl-353 materials and finishes (specific to glenair) Connector Shell, Metal Connector Shell, Plastic Insulator Interfacial Seal Terminal Block, PCB Pin Contact (TwistPin) Socket Contact Encapsulant (Potting) Jackscrews, Jackposts Pigtail Wire, Insulated Hookup Pigtail Wire, Uninsulated Aluminum Alloy 0 In Accordance With SAE-AMS-QQ-A-250/ Plating Code C: Cadmium With Yellow Chromate Conversion Coating in Accordance With SAE-AMS-QQ-P-4, Type II, Class 3 Plating Code N: Electroless Nickel In Accordance With SAE-AMS-2074, Class 3 Stainless Steel, 300 Series, Passivated In Accordance With SAE-AMS-QQ-P-35 iquid Crystal Polymer, 30% Glass-Filled, In Accordance With MI-M-245 iquid Crystal Polymer, 30% Glass-Filled, In Accordance With MI-M-245 Fluorosilicone Rubber In Accordance With A-A-55 iquid Crystal Polymer, 30% Glass-Filled, In Accordance With MI-M-245 Beryllium Copper, Gold Plated In Accordance With ASTM B 4 Type II Class.27 (50 Microinches Minimum) Code C, Over Nickel Underplate In Accordance With SAE-AMS-QQ-N-20, Class 2 (30 Microinches Minimum) Phos Bronze In accordance With ASTM 3 Gold Plated In Accordance With ASTM B 4 Type II Class.27 (50 Microinches Minimum) Code C, Over Nickel Underplate In Accordance With SAE-AMS-QQ-N-20, Class 2 (30 Microinches Minimum) Epoxy Resin, Hysol EE425/HD35 Stainless Steel, Passivated In Accordance With SAE-AMS-QQ-P-35 MI-W-75/: Strand Silver-Coated Copper Wire, Extruded PTFE Insulation, 00 Volts RMS, 0 C. MI-W-75/33: Strand High-Strength Silver-Coated Copper Alloy Wire, Crosslinked Modified ETFE Insulation, 00 Volts RMS, 0 C. Wire Type 07 and 0: Solid Copper Wire In Accordance With A-A-555, 0% Tin/0% ead Coated Wire Type 05 and 0: Solid Copper Wire In Accordance With A-A-555, Gold-Plated Mil-dtl-353 performance specifications Current Rating 3 AMP Dielectric Withstanding Voltage 00 VAC Sea evel, 50 VAC 70,000 Feet Insulation Resistance 5000 Megohms Minimum Contact Resistance Milliohms Maximum ow evel Contact Resistance 32 Milliohms Maximum Magnetic Permeability 2 µ Maximum Operating Temperature -55 C. to +50 C. Shock 50 g. Vibration g. Outgassing Meets NASA Outgassing Requirements Mating Force (0 Ounces Maximum) X (# Of Contacts) Salt Spray 4 Hours Aluminum Shell With Cadmium Plating Durability 500 Mating Cycles Minimum Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

4 Micro-D MI-DT-353 MI-DT-353/0 & /02 Micro-D Connectors Metal Shell Solder Cup Metal Shell Solder Cup M353 Connectors feature gold-plated TwistPin non-removable contacts for solder termination to AWG #2 or smaller wire. m353/0 & /02 solder cup part numbers Electroless Nickel Plated Cadmium Plated Passivated ayout Config. Aluminum Aluminum Stainless Shell Shell Steel Shell P Plug M353/0-AN M353/0-AC M353/0-AP S Receptacle M353/02-AN M353/02-AC M353/02-AP 5P Plug M353/0-BN M353/0-BC M353/0-BP 5S Receptacle M353/02-BN M353/02-BC M353/02-BP 2P Plug M353/0-CN M353/0-CC M353/0-CP 2S Receptacle M353/02-CN M353/02-CC M353/02-CP 25P Plug M353/0-DN M353/0-DC M353/0-DP 25S Receptacle M353/02-DN M353/02-DC M353/02-DP 3P Plug M353/0-EN M353/0-EC M353/0-EP 3S Receptacle M353/02-EN M353/02-EC M353/02-EP 37P Plug M353/0-FN M353/0-FC M353/0-FP 37S Receptacle M353/02-FN M353/02-FC M353/02-FP 5P Plug M353/0-GN M353/0-GC M353/0-GP 5S Receptacle M353/02-GN M353/02-GC M353/02-GP 00P Plug M353/0-HN M353/0-HC M353/0-HP 00S Receptacle M353/02-HN M353/02-HC M353/02-HP E G D F A B C - CONTACTS.0/.0 (2.43/2.23) DIA. 00 CONTACTS.50/.45 (3./3.) DIA..0 (5.0) MAX H.0 (2.7) MAX.03 ±.005 (2.3 ± 0.3) J dimensions ayout A Max. B C Max. D Max. E Max. F G Max. H Max. J Max. In. ±.003 ± 0.0 ±.003 ± 0.0 P S P S P S P S P S P S P S P S Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

5 MI-DT-353/03 & /04 Micro-D Connectors Metal Shell Crimp, Pre-Wired Micro-D MI-DT-353 Micro-D Pre-Wired Pigtails These connectors feature gold-plated TwistPin contacts and mil spec crimp termination. Specify aluminum shells for best availability. 00% tested and backpotted, ready for use. Choose the Wire Type To Fit Your Application For lightest weight and smallest diameter, select M75/33 space grade insulated wire. how to order metal shell Pre-wired crimp mil-dtl-353 micro-d connectors Base Part Number Slash Number Shell Size Wire Type Shell Finish M353 /03 Pin Connector (Plug) /04 Socket Connector (Receptacle) A B C D E F G H Codes A - H specify the shell size. The number of contacts is shown below for reference. A B 5 C 2 D 25 E 3 F 37 G 5 H 00 M75/-2 Teflon -Insulated Hookup Wire 0 Inches (457mm), White 02 3 Inches (4mm), White 03 Inches (457mm), 0 Color Repeating 04 3 Inches (4mm), 0 Color Repeating 3 72 Inches (2mm), White 4 72 Inches (2mm), 0 Color Repeating M75/33-2 Irradiated Tefzel Insulated Hookup Wire 0 Inches (457mm), White 0 3 Inches (4mm), White Inches (457mm), 0 Color Repeating 2 3 Inches (4mm), 0 Color Repeating 5 72 Inches (2mm), White 72 Inches (2mm), 0 Color Repeating 25 AWG Single Strand Uninsulated Wire Inch (2.7mm), Gold Plated Inch (25.4mm), Gold Plated Inch (2.7mm), Tin-ead Plated (2) Inch (25.4mm), Tin-ead Plated (2) Sample Part Number C Cadmium N Electroless Nickel P Passivated SST M353 /04 B 0 N application notes. Shell Material & Finish: Cadmium plating offers better corrosion resistance compared to nickel, but cad is not acceptable for space or RoHS applications. Electroless nickel plated aluminum is recommended for new design activity. Or, choose stainless steel shells for corrosive environments. 2. Tin-Plated Wire: The next revision of the mil spec is expected to prohibit the use of pure tin. Glenair M353 connectors do not contain any components exceeding 7% tin. 3. M75/33 Corrosion: The M353 spec contains a cautionary note regarding M75/33 wire. The wire insulation is known to cause corrosion to metal parts when stored in a sealed environment. This corrosion has been observed on M353 connectors. Glenair has implemented a packaging procedure to minimize or eliminate this problem. Connectors are individually wrapped with teflon tape, and the unit pack is a perforated paper envelope. M75/33 continues to be the preferred wire for space applications. Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

6 Micro-D MI-DT-353 MI-DT-353/03 & /04 Micro-D Connectors Metal Shell Crimp, Pre-Wired E D A B C J WIRE ENGTH +.0/-0.0 (+25.4/-0.0) -5 CONTACTS.04/.0 (2.3/2.23) DIA. 00 CONTACTS.50/.45 (3./3.) DIA. ENGTH FOR INSUATED STRANDED WIRE F G H.03 ±.005 (2.3 ± 0.3) ENGTH +0.2/-0.0 (+5.0/-0.0) ENGTH FOR UNINSUATED WIRE J dimensions ayout A Max. B C Max. D Max. E Max. F G Max. H Max. J Max. In. ±.003 ± 0.0 ±.003 ± 0.0 P S P S P S P S P S P S P S P S Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

7 MI-DT-353/05 Micro-D Hardware Jackscrews and Jackposts Micro-D MI-DT-353 Order One Kit Per Connector. Jackpost kits contain two posts, two hex nuts and 2 lockwashers. Jackscrew kits contain 2 screws and 2 e-rings. Packaged one kit (two screws or posts) per bag. Mil Spec Hardware Kits feature 300 series stainless steel. mil spec jackscrew kits Configuration Connector Size, Thread Size Mil Spec Part Number Glenair Part Number Dimensions Sizes to Contacts. Mil Spec Size A to G #2-5 UNC M353/ /.5 (4. / 4.7).25 (3.2) HEX.0 (2.2)-5 UNC-2B.40 /.40 (2.4 /.7).0 (2.2)-5 UNC-2A Jackpost Size00 Only Mil Spec Size H #4-40 UNC Sizes to Contacts. Mil Spec Size A to G #2-5 UNC-2A M353/ M353/ /.75 (4.7 / 4.4).7 (4.7) HEX.2 (2.)-40 UNC-2B.02 (.57) HEX.25 (3.) DIA.03 (2.2) MAX.40 /.40 (2.4 /.7).03 (2.) DIA.2 (2.)-40 UNC-2A #2-5 UNC 2A.00 (2.2) MIN PERFECT THD.25 (.55) MAX Hex Head Jackscrew ow Profile Size 00 Only Mil Spec Size H #4-40 UNC-2A M353/ (.57) HEX.7 (4.75) DIA.40 (3.5) DIA.0 (2.4). (7.4) MAX #4-40 UNC 2A.0 (2.7) MIN PERFECT THD Sizes to Contacts. Mil Spec Size A to G #2-5 UNC-2A M353/ (3.) DIA.03 (2.) DIA.03 (2.2) MAX.25 (.55) MAX #2-5 UNC 2A.00 (2.2) MIN PERFECT THD Slot Head Jackscrew ow Profile Size 00 Only Mil Spec Size H #4-40 UNC-2A Sizes to Contacts. Mil Spec Size A to G #2-5 UNC-2A M353/ M353/ (3.) DIA MAX.7 (4.75) DIA.0 (2.4).02 (.57) HEX.0 (5.4) MAX.40 (3.5) DIA.03 (2.) DIA #4-40 UNC 2A.0 (2.7) MIN PERFECT THD. (7.4) MAX #2-5 UNC 2A.00 (2.2) MIN PERFECT THD.25 (.55) MAX Hex Head Jackscrew Extended Size 00 Only Mil Spec Size H #4-40 UNC-2A M353/ (5.0) DIA MAX.02 (.57) HEX.0 (5.4) MAX.40 (3.5) DIA #4-40 UNC 2A.0 (2.7) MIN PERFECT THD. (7.4) MAX Sizes to Contacts. Mil Spec Size A to G #2-5 UNC-2A M353/ (3.) DIA MAX.0 (5.4) MAX.03 (2.) DIA #2-5 UNC 2A.00 (2.2) MIN PERFECT THD.25 (.55) MAX Slot Head Jackscrew Extended Size 00 Only Mil Spec Size H #4-40 UNC-2A M353/ (5.0) DIA MAX.0 (5.4) MAX.40 (3.5) DIA #4-40 UNC 2A.0 (2.7) MIN PERFECT THD. (7.4) MAX Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

8 Micro-D MI-DT-353 MI-DT-353/0 & /07 Micro-D Connectors Plastic Shell Solder Cup Plastic Shell Solder Cup M353 Connectors feature goldplated TwistPin non-removable contacts for solder termination to AWG #2 or smaller wire. These all-plastic connectors are more economical, lighter and smaller than metal shell versions. A B C part numbers D ayout Config. Part Number P Plug M353/0-A S Receptacle M353/07-A 5P Plug M353/0-B 5S Receptacle M353/07-B 2P Plug M353/0-C 2S Receptacle M353/07-C 25P Plug M353/0-D 25S Receptacle M353/07-D 3P Plug M353/0-E 3S Receptacle M353/07-E 37P Plug M353/0-F 37S Receptacle M353/07-F 5P Plug M353/0-G 5S Receptacle M353/07-G J F E.0/.0 (2.43/2.23) DIA..0 (2.7) MAX SOCKET CONNECTOR H G.0 (5.0) MAX J PIN CONNECTOR.00/.0 (2.54/2.24) DIMENSIONS ayout A Max. B C Max. D Max. E Max. F Max. G Max. H Max. J Max. In. ±.003 ± 0.0 P S P S P S P S P S P S P S Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

9 MI-DT-353/0 & /0 Micro-D Connectors Plastic Shell Crimp, Pre-Wired Micro-D MI-DT-353 Micro-D Pre-Wired Pigtails These connectors feature gold-plated TwistPin contacts and mil spec crimp termination. 00% tested and backpotted, ready for use. Choose the Wire Type To Fit Your Application For lightest weight and smallest diameter, select M75/33 space grade insulated wire. how to order plastic shell Pre-wired crimp mil-dtl-353/0 and /0 connectors Base Part Number Slash Number Insert Arrangement Wire Type M353 /0 Pin Connector (Plug) /0 Socket Connector (Receptacle) A B C D E F G Codes A - G specify the shell size. The number of contacts is shown below for reference. A B 5 C 2 D 25 E 3 F 37 G 5 M75/-2 Teflon -Insulated Hookup Wire 0 Inches (457mm), White 02 3 Inches (4mm), White 03 Inches (457mm), 0 Color Repeating 04 3 Inches (4mm), 0 Color Repeating 3 72 Inches (2mm), White 4 72 Inches (2mm), 0 Color Repeating M75/33-2 Irradiated Tefzel Insulated Hookup Wire 0 Inches (457mm), White 0 3 Inches (4mm), White Inches (457mm), 0 Color Repeating 2 3 Inches (4mm), 0 Color Repeating 5 72 Inches (2mm), White 72 Inches (2mm), 0 Color Repeating Single Strand Uninsulated Wire Inch (2.7mm), Gold Plated Inch (25.4mm), Gold Plated Inch (2.7mm), Tin-ead Plated (2) Inch (25.4mm), Tin-ead Plated (2) Sample Part Number M353 /0 G 2 application notes. Intermatability: M353 plastic shell connectors are not intermateable with metal shell M353 connectors. 2. Tin-Plated Wire: The next revision of the mil spec is expected to prohibit the use of pure tin. Glenair M353 connectors do not contain any components exceeding 7% tin. 3. M75/33 Corrosion: The M353 spec contains a cautionary note regarding M75/33 wire. The wire insulation is known to cause corrosion to metal parts when stored in a sealed environment. This corrosion has been observed on M353 connectors. Glenair has implemented a packaging procedure to minimize or eliminate this problem. Connectors are individually wrapped with teflon tape, and the unit pack is a perforated paper envelope. M75/33 continues to be the preferred wire for space applications. Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

10 Micro-D MI-DT-353 MI-DT-353 Micro-D Connectors Plastic Shell Crimp Pre-Wired M353/0 & /0 D A B C.0/.0 (2.43/2.23) DIA. ENGTH FOR INSUATED STRANDED WIRE J J PIN CONNECTOR ENGTH +.0/-0.0 (+25.4/-0.0) H ENGTH +.0/-0.0 (+25.4/-0.0) H.00/.0 (2.54/2.24) SOCKET CONNECTOR F E ENGTH FOR UNINSUATED WIRE J ENGTH + 0.2/-0.0 (+5.0/-0.0) H G J SOCKET CONNECTOR ENGTH + 0.2/-0.0 (+5.0/-0.0) H PIN CONNECTOR dimensions ayout A Max. B C Max. D Max. E Max. F Max. G Max. H Max. J Max. In. ±.003 ± 0.0 P S P S P S P S P S P S P S Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

11 MI-DT-353/0 Thru /5 Micro-D Connectors Right Angle PCB Connectors (CBR) Micro-D MI-DT-353 High Performance These connectors feature goldplated TwistPin contacts for best performance. PC tails are.0 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-Dipped Terminals are coated with SN3/Pb37 tin-lead solder for best solderability. how to order M353/0 THRU /5 NARROW PROFIE RIGHT ANGE PCB CONNECGTORS Spec Number Slash Number- Shell Size PC Tail ength Shell Finish Hardware Option M353/ Plug (Pin Contacts) 0 A - Contacts 0 B - 5 Contacts 0 C - 2 Contacts 0 D - 25 Contacts 0 E - 3 Contacts 0 F - 37 Contacts G - 5 Contacts 2 H - 00 Contacts Receptacle (Socket Contacts) 3 A - Contacts 3 B - 5 Contacts 3 C - 2 Contacts 3 D - 25 Contacts 3 E - 3 Contacts 3 F - 37 Contacts 4 G - 5 Contacts 5 H - 00 Contacts 0.0 Inch (2.77 mm) Inch (3.5 mm) Inch (4.37 mm) PC Tail ength ±.05 (0.3) Sample Part Number C Cadmium N Electroless Nickel P Passivated SST N No Jackpost P Jackposts Installed T Threaded Insert in Board Mount Hole (No Jackposts) W Threaded Insert in Board Mount Hole and jackposts Installed See "Hardware Options" below for Illustrations Shell sizes A () through G (5) are #2-5 UNC-2 threads. Shell size H (00) is #4-40 UNC-2 threads. M353/ 3-B 02 N P Hardware options N P T W THRU HOE THRU HOE 2X THREADED INSERTS 2X THREADED INSERTS No Jackpost Jackpost Threaded Insert Jackpost, Threaded Insert Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

12 Micro-D MI-DT-353 MI-DT-353/0 Thru /5 Micro-D Connectors Right Angle PCB Connectors (CBR) A B C E D THREAD SIZES -5 CONTACTS #2-5 UNC 00 CONTACTS #4-40 UNC -5 CONTACTS #2-5 UNC-2B THREADS 00 CONTACTS #4-40 UNC-2B THREADS CONFIGURATION FOR -25 CONTACTS F CONFIGURATION FOR 3-00 CONTACTS H G H J K J 2X MOUNTING HOES PCB MOUNTING HOES -5 CONTACTS.0 DIA. ±.003 (2.44 ± 0.0) 00 CONTACTS.25 DIA. ±.003 (3.± 0.0) DIMENSIONS ayout A Max. B C Max. D Max. E Max. F G Max. H J K Max. Max. ±.003 ± 0.0 ±.003 ± 0.0 ±.00 ±0.25 ±.00 ±0.25 P S P S P S P S P S P S P S P S Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

13 MI-DT-353/0 Thru /5 Micro-D Connectors Right Angle PCB Connectors (CBR) Micro-D MI-DT-353 M353/0 THRU /2 connector pcb AYOUTS PIN CONNECTORS Patterns shown are for connector mounting side of PC board. Thru 5 Contacts.0 (2.44) Diameter Mounting Holes, 00 Pin.25 (3.) Diameter CONNECTOR CONNECTOR FANGE (FRONT) FANGE (FRONT) C.0 (0.5).03 (2.).0 (2.74).250 (.35).250 (.35) (2.) (.27).55 (4.35) PIN M353/0-A 5 PIN M353/0-B CONNECTOR FANGE.03 (2.) (.27).75 (.) CONNECTOR FANGE.0 (0.5) (.35) (.35).5 (4.0).0 (2.74) (.27).5 (2.7) 7.0 (0.5).050 (.27).5 (24.5) 2 PIN M353/0-C 25 PIN M353/0-D (.27).5 (2.32) CONNECTOR FANGE (0.5) 3 PIN M353/0-E 37 PIN M353/0-F FRONT OF CONNECTOR FANGE (.27).25 (30.) (7.2).050 (.27) (.35).050 (.27).275 (.).3 (4.5) 5 PIN M353/-G 00 PIN M353/2-H (.27).25 (32.3).025 (0.4) (45.72) CONNECTOR FANGE CONNECTOR FANGE (0.5).250 (.35).0 (0.5).400 (0.) Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

14 Micro-D MI-DT-353 MI-DT-353/0 Thru /5 Micro-D Connectors Right Angle PCB Connectors (CBR) m353/3 THRU /5 connector pcb AYOUTS SOCKET CONNECTORS Patterns shown are for connector mounting side of PC board. Thru 5 Contacts.0 (2.44) Diameter Mounting Holes, 00 Pin.25 (3.) Diameter.03 (2.).0 (0.5) CONNECTOR FANGE.250 (.35).0 (2.74) CONNECTOR FANGE (FRONT).250 (.35) (2.) (.27).55 (4.35) SOCKET M353/3-A 5 SOCKET M353/3-B CONNECTOR FANGE.03 (2.) (.27).75 (.) CONNECTOR FANGE.0 (0.5) (.35) (.35) (4.0) (.27).5 (2.7) (0.5) (.27).5 (24.5) 2 SOCKET M353/3-C 25 SOCKET M353/3-D 5 3 CONNECTOR FANGE (.35).3 (4.5) CONNECTOR FANGE.0 (0.5).250 (.35) (0.5) (0.5).0 (2.74) (.27).5 (2.32) 3 SOCKET M353/3-E 37 SOCKET M353/3-F FRONT OF CONNECTOR FANGE (7.2).050 (.27).050 (.27) (.27).25 (32.3).025 (0.4) CONNECTOR FANGE (0.) (.) (.) (.27) (30.).00 (45.72) 5 SOCKET M353/4-G 00 SOCKET M353/5-H Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

15 MI-DT-353/ Thru /2 Micro-D Connectors Right Angle PCB Connectors (BR) Micro-D MI-DT-353 High Performance These connectors feature gold-plated TwistPin contacts for best performance. PC tails are.0 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-Dipped Terminals are coated with SN3/Pb37 tinlead solder for best solderability. how to order M353/ THRU /2 RIGHT ANGE PCB CONNECGTORS Spec Number Slash Number- Shell Size PC Tail ength Shell Finish Hardware Option M353 Plug (Pin Contacts) 0.0 Inch (2.77 mm) C Cadmium A - Contacts Inch (3.5 mm) N Electroless Nickel B - 5 Contacts C - 2 Contacts D - 25 Contacts E - 3 Contacts Inch (4.37 mm) PC Tail ength ±.05 (0.3) P Passivated SST F - 37 Contacts 7 G - 5 Contacts H - 00 Contacts Receptacle (Socket Contacts) A - Contacts B - 5 Contacts C - 2 Contacts D - 25 Contacts E - 3 Contacts F - 37 Contacts G - 5 Contacts 2 H - 00 Contacts Sample Part Number M353/ -F 02 N P N No Jackpost P Jackposts Installed T Threaded Insert in Board Mount Hole (No Jackposts) W Threaded Insert in Board Mount Hole and jackposts Installed (See "Hardware Options" below for Illustrations) Shell sizes A () through G (5) are #2-5 UNC-2 threads. Shell size H (00) is #4-40 UNC-2 threads. Hardware options N P T W THRU HOE THRU HOE THREADED INSERT THREADED INSERT No Jackpost Jackpost Threaded Insert Jackpost, Threaded Insert Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

16 Micro-D MI-DT-353 MI-DT-353/ Thru /2 Micro-D Connectors Right Angle PCB Connectors (BR) A F B C D E H.0 (0.5) ±.002 (0.) F Tail ength THREAD SIZES -5 CONTACTS #2-5 UNC 00 CONTACTS #4-40 UNC G J K 2 X PCB MTNG HOES -5 CONTACTS.0 ±.005 (2.43 ± 0.3) 00 CONTACTS.25 ±.005 (23. ± 0.3) DIMENSIONS A Max. B C Max. D Max. E Max. F G Max. H J K ayout ±.005 ± 0.0 ±.007 ± 0. P S P S P S P S P S P S P S P S ±.003 ±0.0 ±.05 ±0.3 ±.00 ±0.25 Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

17 MI-DT-353/ Thru /2 Micro-D Connectors Right Angle PCB Connectors (BR) Micro-D MI-DT M353/ THRU / pcb AYOUTS PIN CONNECTORS Patterns shown are for connector mounting side of PC board. Thru 5 Contacts.0 (2.44) Diameter Mounting Holes, 00 Pin.25 (3.) Diameter.00 (40.4).50 (3.).50 (2.2).050 (.27).50 (3.).050 (.27) (.53) (.27) PIN M353/-A 5 PIN M353/7-G (33.02).00 (45.72).50 (3.).50 (3.).050 (.27).050 (.27) (7.2) (.27) 2 5 PIN M353/-B 3 PIN M353/-E.50 (3.).450(3.) (.27) (5.72) (3.) (3.37).050 (.27) (4.45) 2 PIN M353/-C 25 PIN M353/-D.50 (3.) (53.34) (.27) (3.) PIN M353/-F (3.) (3.50).050 (.27).050 (.27) PIN M353/-H Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

18 Micro-D MI-DT-353 MI-DT-353/ Thru /2 Micro-D Connectors Right Angle PCB Connectors (BR) M353/ THRU /2 pcb AYOUTS SOCKET CONNECTORS Patterns shown are for connector mounting side of PC board. Thru 5 Contacts.0 (2.44) Diameter Mounting Holes, 00 Pin.25 (3.) Diameter.50 (3.).50 (3.).50 (2.2) (.27).375 (.53) SOCKET M353/-A 5 SOCKET M353/-G.300 (33.02).050 (.27).50 (3.) (3.).00 (40.4).00 (45.72).050 (.27) (.27).050 (.27) (3.) (7.2) 5 SOCKET M353/-B 3 SOCKET M353/-E.450(3.).050 (.27) (5.72).50 (3.) 2 SOCKET M353/-C 25 SOCKET M353/-D.50 (3.) (53.34) 37 SOCKET M353/-F (3.37) (3.).050 (.27) (4.45).050 (.27) (3.).50 (3.) (3.50).050 (.27).050 (.27) SOCKET M353/2-H Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

19 MI-DT-353/ Thru /27 Micro-D Connectors Straight PCB Connectors (BS) Micro-D MI-DT-353 High Performance These connectors feature goldplated TwistPin contacts for best performance. PC tails are.0 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-Dipped Terminals are coated with SN3/Pb37 tin-lead solder for best solderability. how to order M353/ THRU /27 straight PCB CONNECGTORS Spec Number Slash Number- Insert Arrangement PC Tail ength Shell Finish Hardware Option M353/ Plug (Pin Contacts) A - Contacts B - 5 Contacts C - 2 Contacts D - 25 Contacts E - 3 Contacts F - 37 Contacts 23 G - 5 Contacts 24 H - 00 Contacts Receptacle (Socket Contacts) 25 A - Contacts 25 B - 5 Contacts 25 C - 2 Contacts 25 D - 25 Contacts 25 E - 3 Contacts 25 F - 37 Contacts 2 G - 5 Contacts 27 H - 00 Contacts 0.0 Inch (2.77 mm) Inch (3.5 mm) Inch (4.37 mm) PC Tail ength ±.05 (0.3) C Cadmium N Electroless Nickel P Passivated SST N No Jackpost P Jackposts Installed T Threaded Insert in Board Mount Hole (No Jackposts) W Threaded Insert in Board Mount Hole and jackposts Installed (See "Hardware Options" below for Illustrations) Shell sizes A () through G (5) are #2-5 UNC-2 threads. Shell size H (00) is #4-40 UNC-2 threads. Sample Part Number M353/ 2-G 03 C W Thru Hole Hardware options N P T W Thru Hole Threaded Insert Threaded Insert No Jackpost Jackpost Threaded Insert Jackpost, Threaded Insert Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

20 Micro-D MI-DT-353 MI-DT-353/ Thru /27 Micro-D Connectors Straight PCB Connectors (BS) J H B E D THREAD SIZES -5 CONTACTS #2-5 UNC 00 CONTACTS #4-40 UNC 2 X PCB MTNG HOES -5 CONTACTS.0 ±.005 (2.43 ± 0.3) 00 CONTACTS.25 ±.005 (23. ± 0.3) A C F G K.0 ±.002 (0.5± 0.05) TAI ENGH ±.005 (0.3) DIMENSIONS ayout A Max. B C Max. D Max. E Max. F G H J Max. K ±.003 ± 0.0 ±.004 ±0.0 ±.00 ±0.25 ±.007 ±0. P S P S P S P S P S P S P S P S ±.00 ±0.25 Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

21 MI-DT-353/ Thru /27 Micro-D Connectors Straight PCB Connectors (BS) Micro-D MI-DT-353 M353/ THRU /24 pcb AYOUTS PIN CONNECTORS Patterns shown are for connector mounting side of PC board. Thru 5 Contacts.0 (2.44) Diameter Mounting Holes, 00 Pin.25 (3.) Diameter.050 (.27) 5.50 (2.2) (.27).375 (.53) PIN M353/-A 5 PIN M353/-G (50.0).050 (.27) (3.) (2.2).00 (45.72).050 (.27).050 (.27).050 (.27).050 (.27) (5.72) PIN M353/-B 3 PIN M353/-E (3.).450(3.).500 (3.0).050 (.27) Connector Orientation (.27) (5.72) (.27) PIN M353/-C 25 PIN M353/-D Pin #.050 (.27) PIN M353/-F.050 (.27) (3.) (53.34) (.27) (3.) (7.2B ).050 (.27).50 (3.) (.27) PIN M353/24-H 27 Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

22 Micro-D MI-DT-353 MI-DT-353/ Thru /27 Micro-D Connectors Straight PCB Connectors (BS).050 (.27).50 (2.2) 7 M353/25 THRU /27 pcb AYOUTS socket CONNECTORS Patterns shown are for connector mounting side of PC board. Thru 5 Contacts.0 (2.44) Diameter Mounting Holes, 00 Pin.25 (3.) Diameter (.27).375 (.53) (50.0).050 (.27) (3.) SOCKET M353/25-A 5 SOCKET M353/2-G.50 (2.2).00 (45.72).050 (.27).050 (.27).050 (.27).050 (.27) (5.72) (3.) 5 SOCKET M353/25-B 3 SOCKET M353/25-E.450(3.).500 (3.0).050 (.27).050 (.27) (5.72).050 (.27) (.27) (3.) 2 SOCKET M353/25-C 25 SOCKET M353/25-D Socket # Connector Orientation.050 (.27) (53.34).050 (.27) (3.) 37 SOCKET M353/25-F 2.00(7.2B ).050 (.27).50 (3.) (.27) SOCKET M353/27-H Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX

23 MI-DT-353/2 Thru /33 Micro-D Connectors Straight PCB Connectors (CBS) Micro-D MI-DT-353 Space-Saving These connectors take up less room on the PC board. PC tail spacing is.075 inch (.mm), compared to.00 inch (2.54). Threaded Inserts Stainless steel inserts are insert molded into plastic trays. These inserts provide a ground path from the PC board to the mating cable. Solder-Dipped Terminals are coated with SN3/Pb37 tin-lead solder for best solderability. how to order M353/ THRU /27 straight PCB CONNECGTORS Spec Number Slash Number- Shell Size PC Tail ength Shell Finish Hardware Option M353 Plug (Pin Contacts) 2 A - Contacts 2 B - 5 Contacts 2 C - 2 Contacts 2 D - 25 Contacts 2 E - 3 Contacts 2 F - 37 Contacts 2 G - 5 Contacts 30 H - 00 Contacts Receptacle (Socket Contacts) 3 A - Contacts 3 B - 5 Contacts 3 C - 2 Contacts 3 D - 25 Contacts 3 E - 3 Contacts 3 F - 37 Contacts 32 G - 5 Contacts 33 H - 00 Contacts 0.0 Inch (2.77 mm) Inch (3.5 mm) Inch (4.37 mm) PC Tail ength ±.05 (0.3) C Cadmium N Electroless Nickel P Passivated SST N No Jackpost P Jackposts Installed T 2-5 Threaded Insert in Board Mount Hole (No Jackposts) W 2-5 Threaded Insert in Board Mount Hole and Jackposts Installed U 4-40 Threaded Insert in Board Mount Hole (No Jackposts) Y 4-40 Threaded Insert in Board Mount Hole and Jackposts Installed (See "Hardware Options" below for Illustrations) Shell sizes A () through G (5) are #2-5 UNC-2 threads. Shell size H (00) is #4-40 UNC-2 threads. Sample Part Number M353/ 33-H 0 C P Hardware options N P T W PC BOARD No Jackpost Jackpost Threaded Insert Jackpost, Threaded Insert Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX REV APRI

24 Micro-D MI-DT-353 MI-DT-353/2 Thru /33 Micro-D Connectors Straight PCB Connectors (CBS) A B C F TAI ENGTH ±.05 (0.3) E D G.025 (0.) Ø.0 (0.5) ±.002 (0.05) HARDWARE OPTION N NO JACKPOST, NO THREADED INSERT m353/2 thru 33 hardware options HARDWARE OPTIONS T & U THREADED INSERT, NO POST HARDWARE OPTION P JACKPOST AND THRU-HOE HARDWARE OPTIONS W & Y JACKPOST AND THREADED INSERT PC BOARD.0 (4.) MIN. (-5 PINS).5 (5.7) MIN. (00 PIN) MTNG HOE DIA. -5 CONTACTS.0/.0 (2.44/2.24) 00 CONTACTS.2/. (3.25/3.0) THREAD SIZE -5 CONTACTS # 2-5 UNC-2B 00 CONTACTS # 4-40 UNC-2B THREAD SIZE -5 CONTACTS # 2-5 UNC 00 CONTACTS # 4-40 UNC USE WITH.5 (3.) MAX. PC BOARD THICKNESS THREAD SIZE -5 CONTACTS #2-5 UNC 00 CONTACTS #4-40 UNC dimensions ayout A Max. B C Max. D Max. E Max. F G Max. In. ±.005 ± 0.3 In. In. In. In. ±.003 ± 0.0 In. P S P S P S P S P S P S P S P S Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX REV APRI

25 MI-DT-353/2 Thru /33 Micro-D Connectors Straight PCB Connectors (CBS) Micro-D MI-DT-353 m353/2 thru 30 pcb AYOUTS PIN CONNECTORS Patterns shown are for connector mounting side of PC board..075 (.).050 (.27).025 (0.4).3(4.5).03 (0.) REF (5.0).55 (4.35).075 (.).040 (.0) DIA.5(5.72).0 (2.44) DIA.3(4.5).075 (.).050 (.27).025 (0.4).03 (0.) REF Connector Orientation (.) REF.75 (.).040 (.0) DIA.075 (.).5 (5.72).0 (2.44) DIA PIN M353/2-A 5 PIN M353/2-B.075 (.).050 (.27).025 (0.4).3(4.5).03 (0.) REF (2.7) REF (.0) DIA.075 (.) 2.5 (5.72).0 (2.44) DIA Pin #.075 (.).050 (.27).025 (0.4).3(4.5).03 (0.) REF 2 PIN M353/2-C 25 PIN M353/2-D (5.24) REF.5 (24.5) (.0) DIA (.) 3.5 (5.72).0 (2.44) DIA.075 (.).050 (.27).025 (0.4).3(4.5).03 (0.) REF (.05) REF.5 (2.32).040 (.0) DIA (.) 7.5 (5.72).0 (2.44) DIA.075 (.).050 (.27).025 (0.4).3(4.5).03 (0.) REF 3 PIN M353/2-E 37 PIN M353/2-F (.0) DIA (.) REF.25 (32.3) (.).5 (5.72).0 (2.44) DIA.2325 (5.).075 (.).0375 (0.5).075 (.) (.05).25 (30.).040 (.0) DIA.0 (2.44) DIA (3.) DIA.00 (45.72) (0.5).075 (.).040 (.0) DIA PIN M353/2-G 00 PIN M353/30-H (.).75 (4.7). (7.4) Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX REV APRI

26 Micro-D MI-DT-353 MI-DT-353/2 Thru /33 Micro-D Connectors Straight PCB Connectors (CBS).075 (.).050 (.27).025 (0.4).3(4.5).03 (0.) REF mm353/3 thru /33 pcb AYOUTS socket CONNECTORS Patterns shown are for connector mounting side of PC board (5.0).55 (4.35).075 (.).040 (.0) DIA.5(5.72).0 (2.44) DIA.3(4.5).075 (.).050 (.27).025 (0.4).03 (0.) REF (.) REF.75 (.).040 (.0) DIA.075 (.) Connector Orientation Socket M353/3-A 5 Socket M353/3-B.5 (5.72).0 (2.44) DIA.075 (.).050 (.27).025 (0.4).3(4.5).03 (0.) REF (2.7) REF (.0) DIA (.) Socket #.075 (.).050 (.27).025 (0.4).3(4.5) (5.72) (0.) REF (2.44) DIA.00(5.24) REF.5 (24.5) 2 Socket M353/3-C 25 Socket M353/3-D (.0) DIA.075 (.).5 (5.72).0 (2.44) DIA.075 (.).050 (.27).025 (0.4).3(4.5).03 (0.) REF (.05) REF.5 (2.32).040 (.0) DIA (.).5 (5.72).0 (2.44) DIA.075 (.).050 (.27).025 (0.4).3(4.5).03 (0.) REF (.) REF 3 Socket M353/3-E 37 Socket M353/3-F (32.3).040 (.0) DIA.075 (.).5 (5.72).0 (2.44) DIA.2325 (5.).075 (.).0375 (0.5).075 (.) (30.).040 (.0) DIA.0 (2.44) DIA (.05).25 (3.) DIA.00 (45.72).040 (.0) DIA (4.7) (0.5)..075 (.).075 (.) (7.4) 5 Socket M353/32-G 00 Socket M353/33-H Glenair, Inc. U.S. CAGE Code 0324 GENAIR, INC. 2 AIR WAY GENDAE, CA FAX REV APRI