P Panel Mount Receptacles PIN CONTACTS WITH CRIMP TERMINATION
|
|
- Job Jackson
- 5 years ago
- Views:
Transcription
1 Crimp Terminated Receptacles, How To Order HOW TO ORDR Sample Part Number L-6P6 MT G Part Number Receptacles PIN CONTACTS WITH CRIMP TRMINATION connectors are designed for rear-panel mounting and are supplied with conductive panel gaskets. These connectors feature machined aluminum shells, fl uorosilicone face seals and wire grommets for environmental protection. Contacts are rear-release snap-in crimp type. are supplied with crimp contacts packaged separately. Size #23 signal pins accept up to #22 AWG wire. Size #16 contacts accept #16-18 AWG wire. Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities also accept coaxial contacts purchased separately. Attach optional shielding adapters ( ) for MI protection. Shell Size - Insert Arrangement Shell Finish Hardware Option Rear ed Receptacle with Pin Contacts See Table 1 for Available Insert Arrangements To order a connector without size #16 or #12 power pins, substitute W instead of P in the insert arrangement. xample: 36P2 is supplied with 2 power pins. 36W2 is supplied less the power pins. M lectroless Nickel general purpose applications MT Nickel-PTF 1000 Hour Grey maximum corrosion protection and durability (non-refl ective grey) ZNU Zinc-Nickel with Black Chromate tactical applications (non-refl ective black) N No Hardware G Guide Pin P Female Jackpost S Female Guide Socket See Section B for coaxial contacts purchased separately. Additional shell fi nishes are listed on page C-9. SPCIFICATIONS Current Rating #23 5 AMPS, #16 13 A., #12 23 A. Dielectric Withstanding Voltage Insulation Resistance # VAC RMS, #12 and # VAC RMS 5000 megohms minimum Operating Temperature -65 C. to +150 C. Shock 300 g. Vibration 37 g. Shell Contacts MATRIALS AND FINISHS Aluminum alloy Insulators Retention Clips Interfacial Seal, Grommet Hardware Panel Gasket Copper alloy, 50 microinches gold plated Liquid crystal polymer (LCP) Beryllium copper alloy Flourosilicone rubber 300 series stainless steel Fluorosilicone, conductive -1 -Mail: sales@glenair.com
2 Crimp Terminated Receptacles, How To Order Table I Contact Arrangements Layout Contact Quantity #23 #16 #12 A-5 5 B-2P2 2 B-9 9 C D D-3P3 3 D-7P P P3 4 3 F-15P F F-5P5 5 G Face View RTAINING CLIP FRONT INSULATOR RAR INSULATOR GROMMT POTTING WIR (RF.) CROSS-SCTIONAL VIW OF.195 (4.95).025 (0.64).007 (0.18) TABL 2 HARDWAR OPTION MI GASKT INTRFACIAL SAL PIN CONTACT SHLL GUID PIN H-10P4 6 4 H-29P H-36P H-54P H-5P5 5 H N No Mating Hardware Connector is supplied with threaded holes. Shell sizes H and L have #6-32 threads, other sizes have #4-40 threads. Thread depth is.150" (3.8). P Jackposts Connector is supplied with non-removable stainless steel jackposts. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. Stainless steel. J-17P J-25P J J-7P7 7 K-27P K-35P K K-9P9 9 G Guide Pins Connector is supplied with stainless steel non-removable guide pins. Mates with type "S" guide sockets on corresponding plug connector. S Guide Sockets Connector is supplied with stainless steel non-removable bushings. Mates with type "G" guide pins on corresponding plug connector. L-6P6 6 L M Mail: sales@glenair.com
3 Crimp Terminated Receptacles, Shell Size A, B, C, D,, F, J, K A BLIND MAT B BASIC C BASIC D.308 (7.82) 2-56 UNC-2B X.150 (3.81) MIN JACKPOST SHOWN FOR RFRNC. S ORDRING INFORMATION FOR OTHR OPTIONS..335 (8.51) SHLL SIZS A, B, C, D,, F, G, J, K +/-.030 (0.76) ALLOWABL MISALIGNMNT FROM CNTRLIN C BASIC.215 (5.46).485 (12.32) 2-56 UNC-2B X.150 (3.81) MIN for Size A-F, J and K Shell A Max. B Basic C Basic D Max. Max. Size In. mm. In. mm. In. mm. In. mm. In. mm. A B C D F J K Mail: sales@glenair.com
4 Crimp Terminated Receptacles, Shell Size G (47.27) (40.01) BASIC (30.86) BASIC (27.41).387 (9.83) BLIND MAT 2-56 UNC-2B X.150 (3.81) MIN JACKPOST SHOWN FOR RFRNC. S ORDRING INFORMATION FOR OTHR OPTIONS..335 (8.51) SHLL SIZS A, B, C, D,, F, G, J, K +/-.030 (0.76) ALLOWABL MISALIGNMNT FROM CNTRLIN (35.81) (30.86) BASIC.215 (5.46).575 (14.61) 2-56 UNC-2B X.150 (3.81) MIN Shell Size H and L F G BASIC H BASIC J.410 (10.41) BLIND MAT 4-40 UNC-2B X.150 (3.81) MIN JACKPOST SHOWN FOR RFRNC. S ORDRING INFORMATION FOR OTHR OPTIONS..385 (9.78) SHLL SIZS H, L +/-.040 (1.02) ALLOWABL MISALIGNMNT FROM CNTRLIN K.600 (15.24) H BASIC 4-40 UNC-2B X.150 (3.81) MIN.265 (6.73) SIZ H & L DIMNSIONS Shell F Max. G Basic H Basic J Max. K Max. Size In. mm. In. mm. In. mm. In. mm. In. mm. H L Mail: sales@glenair.com
5 Crimp Terminated Receptacles, Shell Size M (78.36) ) BASIC (55.88) BASIC (44.32).150 (3.81) MIN 2X.660 (16.76).470 (11.94) 2X 6-32 UNC-2B X.150 (3.81) MIN GUID PIN SHOWN FOR RFRNC S TABL I (DWG. SHT #1).093±.005 (2.36±0.13).320 (8.13) (55.88) BASIC.385 (9.78).. BLIND MAT 4-40 UNC-2B X (.150) MIN DP. SHLL SIZ M +/-.050 (0.76) ALLOWABL MISALIGNMNT FROM CNTRLIN -5 -Mail: sales@glenair.com
P Straight PCB Panel Mount Receptacle
How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied
More informationS Rear Panel Float Mount Plugs
How To Order Series 79 HOW TO ORDR Sample Part Number H-66 M N Part Number Rear Panel Float Mount Plugs SOCKT CONTCTS WITH CRIMP TRMINTION connectors are equipped with rear-panel float mounting assemblies
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Panel Series 79 Micro-rimp Section : Panel onnectors, rimp Termination Panel Plugs With Socket ontacts, rimp Termination, 790-027S 790-027S connectors are designed for rear-panel mounting and are supplied
More informationS Straight PCB Panel Mount Plugs
Sample Part umber K-43 M E P B Part umber PCB Panel Mount Plugs socket contacts with STRAIGHT PCB TERMIATIO Lightweight, rugged vertical mount headers feature gold-plated PC tail contacts for thru-hole
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing
More informationMDM MDM MIL-DTL STYLE MIL-DTL STYLE. Applications. Features
MDM Applications Features MIL-DTL-83513 STYLE As the result of the miniaturization of today s sophisticated electronics where more and more electronics are being packed into smaller and lighter electronic
More informationRECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES
Rev. C, March, 2016 RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Connectors with wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationMicro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors
Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More informationAmphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
More information2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
More informationFeatures and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationSection L MIL-DTL Micro-D Connectors
Section MI-DT-353 Micro-D Connectors Micro-D MI-DT-353 product selection guide Glenair s Complete Micro-D Product ine includes all M353 Micro-D connectors. Choose Solder Cup, Pre-Wired or PCB versions.
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationnterconnect compatibility new SEALED CONNECTORS harsh environment dual seals for harsh environments ergonomic locking tab for easier mating
new harsh environment SEALED CONNECTORS nterconnect dual seals for harsh environments ergonomic locking tab for easier mating compatibility AT Series plug wedges ensure a proper seal placement and contact
More informationHyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationDT Series Technical Manual
Deutsch Industrial UK Stanier Road St. Leonards On Sea East Sussex TN 9RF England Ph. (0) 7 Fax (0) 979 industrialuk@deutsch.net Deutsch Industrial Europe Fraunhoferstrasse b Martinsried Germany Ph. +9
More informationModular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment.
GM Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. Passenger control Networking and lighting control Diagnostic support for brakes, motors
More informationWILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
More informationDTP Series : Contacts (Open Barrel) Type Barrel Type GA Size
Deutsch Connectors DTP Series Deutsch s DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed
More informationAmphenol 67 and 165 Series Miniaturized Standard Connectors
Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................
More informationConnection Systems. Bulls-Eye Subminiature Circular Connectors
Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
80 Mighty Mouse Technical Reference Reference SRIPTION RQUIRMNT PROUR TRI ontact resistance S S39029 Table V Max Wire Test Voltage Size urrent rop 12 23 42 14 17 40 16 13 49 20 7.5 55 22 5 73 24 3 45 26
More informationKVBS Reverse bayonet connectors for railway applications
Reverse bayonet connectors for railway applications KVBS connector series derives from the RF CVBS one and it is based on Mil-DTL-5015 and VG95234 specs. The most important advantages are the simpler and
More informationSeries 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationDT04 08P + W8P
Deutsch Connector Assortment Flip Kit *763354 This assortment contains 574 pieces/sets of widely used Deutsch Connectors. Flip Kits are handy both in the shop and the service vehicle. They are portable,
More informationTechnical Data, High Power 2-way* Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Environmental Data (acc.
Technical Data, High Power 2-way* Electrical Data Operating Voltage Operating Current Contact Resistance Voltage Proof Insulation Resistance Mechanical Data 48 VDC* see derating curve 2 mω max. 1000 VAC,
More informationMDual Power Connector
MDual Power Connector Overview Utilizing the efficient high-current design of the PowerBud contact technology, the MDual power connectors carry high power in a small package and features self-aligning
More informationModular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment.
GM Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. Passenger control Networking and lighting control Diagnostic support for brakes, motors
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationType N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
More informationSERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
More informationMCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationBodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
More informationVG95234 Qualified Bayonet-Lock Connectors
Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationFeatures and Application
ML-DTL- Features and Application MS2426*/AE66* Features and Application ML-DTL- family offers connectors with bayonet coupling as well as threaded coupling. These connectors are intermateable with correspondingly
More informationMicro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector
Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More informationEthernet 100 Mbps Quadrax
Ethernet 100 Mbps Quadrax Quadrax Contact Today s technology for Airbone and Military equipment is more and more complex, requiring the management of an increasing flow of information at greater speeds.
More informationREP Series. Environmentally-Sealed Rectangular Plastic Connectors
Environmentally-Sealed Rectangular Plastic Connectors REP Series Environmentally - Sealed Rectangular Plastic Connectors Optimised for use in rail and embedded applications Smiths Interconnectors REP Series,
More informationAmphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock
Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock www.amphenolpcd.com.cn CONTENT HVBI PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE...... 3 alternate KEYING positions............
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/36 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL
More informationMICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction
MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The
More informationLuminus Series Amphenol Pcd
Luminus Series Amphenol Pcd Amphenol Pcd Pcd is is one one of of the the world s leading suppliers of of interconnect products for for Military, Commercial Aerospace and and Industrial applications. Located
More informationv1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Copyright 2013 JAE Electronics, Inc.
v1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Application Examples Laptops, Desktops, Ultrabooks Audio/ Video editing equipment Display devices Adapter/
More informationD X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
More informationfor Quadrax and ELIO 8
1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467
More informationMIL-DTL Series 1 Solder Type PT
MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally
More informationARinc 600 Series. Rack & Panel Rectangular Connector. Brief introduction. Specification. 1. Material and surface treatment. 3. Electric properties
ARinc 600 Series Rack & Panel Rectangular Connector Brief introduction Good performance of environment resistance 216 kinds of anti-misoperation styles High density up to 800 signal contacts Low insertion
More informationGalley Connectors. Intermateable and Interchangeable Ability to mate with other ARINC 810 galley connectors in the market
Galley Connectors Intermateable and interchangeable with other ARINC 810 galley connectors, Amphenol Pcd s APeX Galley Connector, Rectangular is a reliable, robust, connector that uses overmold technology
More informationmcx connectors DIVIDER PAGE
mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM
More informationHow to Order CONTACT TYPE FLANGE TYPE MOUNTING CONTACT TERMINATION
hermetically sealed connectors are designed to meet environmental conditions of extreme pressure differential. These connectors are part of the ITT Cannon D Subminiature series and are qualified to MIL-C-24308
More informationAmphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
More informationSERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
More informationShell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
More informationPHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
More informationIPT SE and IPT Series
IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs
More informationMIL-C-5015 Bulkhead Receptacles
I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient
More informationMIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors
MIL-DTL-55302 QPL'D 2 and 3 Row Printed Circuit oard Connectors 17, 29, 33, 41, 53, 62, 65, 72, 80.1, 84, 96, 98, 120, 126, 160 and 160.4 General Specifications Number 17, 29, 33, 41, 53, 62, 65, 72, 80.1,
More informationAMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications.
AMPHENOL PCD SHENZHEN ASGTC Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications 1 www.amphenolpcd.com.cn CONTENT CONTENT ASGTC Series Connector structure.........
More informationWedge in Plugs Stock No
Amphenol Connectors Description Plugs Stock No. Receptacles Stock No. 2-way 38170 38171 3-way 38172 38173 4-way 38174 38175 6-way 38176 38177 8-way 38178 38179 12-way 38180 38181 Wedge in Plugs Stock No.
More informationAPPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
More informationInterface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
More information800 Pin Receiver and ITA Modules and Contacts 2
TABLE OF CONTENTS 800 Pin Signal Module 800 Pin Receiver and ITA Modules and Contacts 2 Interface Devices (IDs) CASS Receiver 4 Light Weight CASS Receiver 5 80 Series Receiver 6 CASS Connector Module Configuration
More informationDeutsch Connectors. Catalogue Number #2014TDC.
Catalogue Number #2014TDC Features & Benefits Deutsch connectors are ideal where dust, dirt, moisture, salt spray, and vibration can contaminate or damage electrical connections. Deutsch Features Common
More informationAmphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More informationSMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
More information9316 series Underwater applications Explosion proof Hermetically sealed
Branche Connecteurs Offshore 9316 series Underwater applications Explosion proof Hermetically sealed Summary 9316 1 Introduction 2 Presentation 3 Technical characteristics 4 Synopsis 5 Part-numbering system
More informationCL-3/1297 CGL INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V
CL-3/1297 INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V Contents Introduction... 2 Features... 3 How to Order... 4 Part Number Explanation... 5 Technical Data... 6 250 / 500 Volt Contact Arrangements...
More information2.92mm connectors DIVIDER PAGE
connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A
More information2.4mm connectors 155
connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.
More information8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies
8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07
More informationSGM Series. Size 22 Contacts. Qualified to MIL-DTL IEC Publication HIGH DENSITY RECTANGULAR CONNECTORS with FIXED CONTACTS
Size 22 Contacts Qualified to MI-DT-28748 IEC Publication 807-1 Telecommunication U.. File #E140980 MIITARY SPECIFICATIONS: Qualified to MI-DT-28748/7 and MI- DT-28748/8. INTERNATIONA STANDARDS: IEC 807-1
More informationCannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation
How to order VG Order reference Series Shell style Dash Shell size Contact arrangement Contact type Contact termination Insulator position Explanation Series Shell style VG95234 A 32 6 S 1 N VG95234 J1,
More informationDATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
More informationITT Cannon KJL Series MIL-DTL Series I Connectors
APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More informationORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
More informationMIL-DTL Micro-D. MD Series CONNECTING YOUR ENGINEERING PASSION MILITARY STYLE CONNECTORS
CONNECTING YOUR ENGINEERING PASSION Series MIL-DTL-353 Micro-D MILITARY STYLE CONNECTORS MILITARY & DEFENSE EDITION Lightweight, High-Density Connectors Pre-Assembled Wire Harnesses PCB Angled & Straight
More informationAllen Electric Connector Sales, Inc. (AECS, Inc.)
Allen Electric Connector Sales, Inc. (AECS, Inc.) A Woman owned small business since 1996, AECS, Inc. offers military circular electric connectors, connector accessories, custom design connectors, custom
More informationIntegrated Backshell Fire Proof Connector
8535/8536 Series Integrated Backshell Connectors Integrated Backshell Fire Proof Connector Stainless steel screw coupling connector designed for use in aviation harsh environments. Perfect for engines
More informationInterface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
More informationKJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features
Applications Features High Performance ilitary Aircraft Commercial Airlines Communications Equipment Armored Personnel Carriers & Tanks Quick ating A three point bayonet coupling system that not only makes
More informationMCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
More informationEPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
More informationFeatures and Application
ML-DTL-83723 Series Features and Application Bayonet and Threaded Coupling Features and Application ML-DTL-83723 Series family offers connectors with bayonet and threaded coupling including lanyard-release
More informationSealed Sensor Connector (SSC) System
Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More information