SGM Series. Size 22 Contacts. Qualified to MIL-DTL IEC Publication HIGH DENSITY RECTANGULAR CONNECTORS with FIXED CONTACTS
|
|
- Joan Stevenson
- 5 years ago
- Views:
Transcription
1 Size 22 Contacts Qualified to MI-DT IEC Publication Telecommunication U.. File #E MIITARY SPECIFICATIONS: Qualified to MI-DT-28748/7 and MI- DT-28748/8. INTERNATIONA STANDARDS: IEC MATERIAS AND FINISHES: Insulator: Glass filled DAP per ASTM-D-5948 type SDG-F. Grey color is standard, black or green available. Fixed Contacts: Copper alloy, inch (0.38 microns) gold over nickel. Hoods, Cable Adapters: Aluminum with yellow or black anodize. Shells: Aluminum with yellow anodize or black anodize. Jackscrew System: Passivated stainless steel. Polarizing Guides: Copper alloy with nickel plate or passivated stainless steel. Vibration ocks: Copper alloy with nickel plate. SGM SERIES TECHNICA CHARACTERISTICS SGM connectors are high reliability, high density, rectangular connectors qualified to MI-DT specifications. The SGM offers solder cup, wrap post and straight solder termination styles, and is intermateable with SMP and SGMC series connectors. Thirteen connector variants, four through 75 poles, are offered. Contact spacing is inch (2.39mm) between centers, and contact diameters are inch (0.76mm), rated to five amperes per contact. A complete array of mounting, locking, polarizing and shrouding accessories is available for the SGM. For details, see the High Density Rectangular Connector Accessories section. Ideal applications for the SGM are where low weight and high density are requirements. The high reliability of closed entry female contacts insures numerous couplings of the connector without substantial degradation of contact resistance. SGM connectors are preferred for use in the aerospace, avionics, telecommunications, instrumentation, medical and robotics industries. MECHANICA CHARACTERISTICS: Fixed Contacts: Male Size 22: inch (0.76 mm) diameter. Female Closed entry design for highest reliability. Contact Retention in Insulator: 6 lbs. (26.5N) minimum. Contact Termination: inch (0.94 mm) internal diameter on solder cup style contact for 22 AWG (0.33 mm 2 ) wire maximum inch (0.64 mm) diameter for printed board mount style contact inch (0.64 mm) square for wire post style contacts. ocking Systems: Friction, vibration locks and jackscrews. Polarization: Polarized guides, polarized shells and jackscrew system. Mechanical Operations: 1000 operations per IEC Jackscrews: Standard threads, 2-56 UNC on all sizes, except 75 connector variant, which uses 6-32 UNC. Metric threads, M2X0.4 and M3X0.5 available. EECTRICA CHARACTERISTICS: Contact Current Rating (maximum): 5 amps. Initial Contact Resistance: ohms Flash over Voltage: 2200 V.AC (rms) Test Voltage: 1000 V.AC (rms) Insulation Resistance (minimum): 5 G ohms Clearance and Creepage Distance (minimum): inch (0.71 mm) Working Temperature: -55 C to 135 C Working Voltage: 250 V.AC (rms) 25
2 SGM SERIES WRAP POST S 0.63 (16.0) FINISH: (0.38 MICRONS) GOD OVER NICKE *2-56 UNC COSED ENTRY 0.15 (3.8) NYON WASHER (0.64) SQUARE CODE WW1 WW (5.72) (9.02) SPECIFY CODE IN STEP 4 OF ORDERING INFORMATION 0.59 (15.0) NYON HEX NUT SGM SERIES SODER CUP S 0.63 (16.0) 0.15 (3.8) 0.59 (15.0) FINISH: (0.38 MICRONS) GOD OVER NICKE Ø (0.91) SODER CUP 0.08 (2.0) Ø COSED ENTRY 0.16 (4.1) SPECIFY CODE SC IN STEP 4 OF ORDERING INFORMATION Ø (0.76) SGM SERIES STRAIGHT SODER S 0.15 (3.8) 0.63 (16.0) NYON WASHER *2-56 UNC COSED ENTRY Ø (0.64) CODE DS3 DS4 DS (2.36) (3.96) SPECIFY CODE IN STEP 4 OF ORDERING INFORMATION FINISH: (0.38 MICRONS) GOD OVER NICKE 0.59 (15.0) NYON HEX NUT DS (4.75) 26 *M2X0.4 METRIC THREAD AVAIABE
3 SGM (SMP) SERIES INSUATOR DIMENSIONS MATING FACE OF FEMAE CONNECTOR OR REAR FACE OF MAE CONNECTOR (6.10) (5.33) (5.33) (5.51) (5.33) (19.81) (12.24) (17.78) (19.81) (16.66) (22.23) MAE AND FEMAE PROFIE VIEW 4 S 5 S 7 S 9 S (19.96) (13.49) (15.88) (22.35) (26.92) (20.68) (25.40) (31.75) 11 S 14 S 20 S 26 S (9.91) (9.91) (9.91) (34.14) (27.79) (26.21) (31.75) (38.10) (32.54) (35.76) (41.28) 29 S 34 S 44 S 50 S MATERIA: GASS FIED DIAY PHTHAATE PER ASTM-D-5948 TYPE SDG-F 27
4 SGM SERIES HOE POSITION DIMENSIONS AND PRINTED BOARD HOE PATTERN MATING FACE OF FEMAE CONNECTOR OR REAR FACE OF MAE CONNECTOR (2.29) (1.14) 0.90 (2.29) (4.78) (1.14) (1.02) (1.02) (12.24) (7.16) (9.55) (16.66) (7.16) (13.49) (3.70) (2.29) (6.86) (3.73) (1.19) (1.19) (1.19) (1.19) 4 S 5 S 7 S 9 S 11 S (15.88) (14.33) (20.68) (19.10) (25.40) (21.49) (27.79) (9.55) (1.19) (1.19) (1.19) (1.19) 14 S 20 S 26 S 29 S (3.43) (1.14) (3.43) (3.43) (1.14) (1.14) (19.10) (26.21) (25.07) (32.54) (28.65) (35.76) (1.19) (1.19) (1.19) (3.73) 34 S 44 S 50 S SUGGEST (2.66) Ø HOES IN PRINTED BOARD FOR CONNECTOR MOUNTING HOES SUGGEST (1.01) Ø HOES IN PRINTED BOARD FOR TERMINATIONS 28
5 SGM 75 WITH SODER CUP S 0.81 (20.6) 0.19 (4.8) FINISH: (0.38 MICRONS) GOD OVER NICKE COSED ENTRY 0.16 (4.1) SPECIFY CODE SC IN STEP 4 OF ORDERING INFORMATION (0.91) Ø SODER CUP (0.76) Ø *6-32 UNC 0.75 (19.1) 0.21 (5.3) 0.16 (4.1) * M3X0.5 METRIC THREAD AVAIABE SGM 75 INSUATOR DIMENSIONS MATING FACE OF FEMAE CONNECTOR OR REAR FACE OF MAE CONNECTOR (7.87) (19.05) (34.93) (42.67) SGM 75 SEE SGMC SERIES 75 PRINTED BOARD HOE PATTERN PAGE 4 FOR CONNECTOR VARIANT HOE POSITIONS MATERIA: GASS FIED DIAY PHTHAATE PER ASTM-D-5948 TYPE SDG-F 29
6 ORDERING INFORMATION CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9 Insert 0 When Step Is Not Used STEP SGM 20 M SC E1 0 0 J 0 STEP 1 - Basic SGM STEP 2 - SGM Connector Variants 4, 5, 7, 9, 11, 14, 20, 26, 29, 34, 44, 50, 75 STEP 3 - Connector Gender M Male insulator. F Female insulator. STEP 4 - Contact Termination Style All female contacts closed entry design SC Solder cup DS3 Straight solder [0.093 (2.76)] not offered DS4 Straight solder [ ] not offered DS5 Straight solder [0.156 (3.96)] not offered DS6 Straight solder [0.187 (4.75)] not offered WW1 Wrap post [0.225 (5.72)] not offered on 75 variant. WW2 Wrap post [0.355 (9.02)] not offered on 75 variant. *STEP 5 - Polarizing Guides and Jackscrew System N Polarizing guides. NSS Stainless steel polarizing guides. T Fixed jackscrews. E Short turnable jackscrews. E1 Turnable jackscrews used with hoods only. Not offered ESS Short turnable jackscrews. 0 If no polarizing guides or jackscrews are required. Also use 0 if ordering hoods equipped with jackscrews, for 75 variant, see STEP 8. *STEP 9 - Additional Options B For black anodized aluminum parts. V ock tab, not offered V ock lever, not offered 0 If no additional options are required. M Jackscrews with metric threads. *STEP 8 - Cable Adapters (Hoods) J Top opening hood offered on all variants except If no hoods are required. Z Top opening hood equipped with jackscrew system offered on 75 variant only. *STEP 7 - Polarization Positions of Shells Select letter to designate position of male pin or female slot for polarization system. A, B, C, D, E, F, G 0 If no polarization is required or if no shells are required. *STEP 6 - Shells P Male shell. R Female shell. 0 If no shells are required. *NOTE: FOR DETAIS OF ITEMS ISTED IN STEPS 5 THROUGH 9, SEE HIGH DENSITY RECTANGUAR CONNECTOR ACCESSORIES SECTION. 30
Catalog C-013 Rev. D
Catalog C-013 Rev. D Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG and VITA. Introduction of new and unique
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationRack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationSection L MIL-DTL Micro-D Connectors
Section MI-DT-353 Micro-D Connectors Micro-D MI-DT-353 product selection guide Glenair s Complete Micro-D Product ine includes all M353 Micro-D connectors. Choose Solder Cup, Pre-Wired or PCB versions.
More informationDirectory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
More informationPROTECTRON MACHINED CONTACT CONNECTORS
PROTECTRON MACHINED CONTACT CONNECTORS PROTECTRON INTRODUCTION INNER CLIP The inner cip consists of 4 Leaf Springs, stamped and rounded to take strip/round mae contacts at the bottom edge, faciitating
More informationModular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment.
GM Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. Passenger control Networking and lighting control Diagnostic support for brakes, motors
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More informationDirectory chapter 01
Directory chapter 01 Miniature D connectors, 1.27 mm pitch Page I/O connectors................................................. 01.02 Pin and socket Technical characteristics........................................
More informationBY Series 4 Tumbler Value Added Security Switchlocks
4 Tumbler Value Added Security s Features/Benefits Anti-static switch Removable lock core atch pawl option Snap-together assembly Typical Applications Computers Point-of-sale terminals Postal equipment
More informationHyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationAmphenol 67 and 165 Series Miniaturized Standard Connectors
Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................
More informationConnection Systems. Bulls-Eye Subminiature Circular Connectors
Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationMIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors
MIL-DTL-55302 QPL'D 2 and 3 Row Printed Circuit oard Connectors 17, 29, 33, 41, 53, 62, 65, 72, 80.1, 84, 96, 98, 120, 126, 160 and 160.4 General Specifications Number 17, 29, 33, 41, 53, 62, 65, 72, 80.1,
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More informationCONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
More informationCatalog C-015 Rev. E
Catalog C-015 Rev. E Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG and VITA. Introduction of new and unique
More informationCONEC SnapLock. 1 Introduction
CONEC SnapLock 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional screwing. A spring-loaded clip integrated
More informationPCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
More informationCOIN CELL PC BATTERY HOLDERS
COIN CELL PC BATTERY HOLDERS 20mm to 30mm Sizes 12mm to 16mm & 1/3 N Sizes SINGLE CELL HOLDER (3-VOLT) DUAL CELL HOLDER (6-VOLT) Single and Dual Printed Circuit Cell Holders for Lithium Coin Cells. Designed
More informationMDM MDM MIL-DTL STYLE MIL-DTL STYLE. Applications. Features
MDM Applications Features MIL-DTL-83513 STYLE As the result of the miniaturization of today s sophisticated electronics where more and more electronics are being packed into smaller and lighter electronic
More informationFeatures/Benefits. Typical Applications
Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with or without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials
More informationRECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES
Rev. C, March, 2016 RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Connectors with wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification
More informationGeneral characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationNTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
More informationH Series 4 & 6 Tumbler Power Switchlocks
4 & 6 Tumbler Power s Features/Benefits Positive detent Multi-pole and multi-position Snap-together assembly Power switching Typical Applications Machine controls Elevators Models Available Specifications
More informationHARTING. Interface Connectors. People Power Partnership
11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs
More informationMicrominiature Connectors
Microminiature Connectors Product Manager August 2013 The Microminiature Range 3 basic families of small pitch connectors CENTI Line - 0.075" / 1.90mm pitch between contacts 2D double density, CTA strip,
More informationM8 Series. Key features: BUCCANEER
Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationRMP SERIES INFORMATION GUIDE
RMP SERIES INFORMATION GUIDE DESCRIPTION & DESIGN FEATURES Applications RMP series connectors can be used wherever high amperage connection of AC or DC power is required. Typical applications are the connection
More informationCONNECTORS & RECEPTACLES
60 HEX NUT Used in mounting rear or front of panel receptacles LOCK WASHER Prevents rear or front of panel receptacle from working loose when installed TYPICAL SL172F REAR MOUNT RECEPTACLE THREADED BUSHING
More informationSealed Sensor Connector (SSC) System
Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal
More informationInsulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide
More informationM Series Pin and Socket Connectors Catalog Revised 3-01
M Series Connectors Product Facts Most connectors intermateable with connectors made to MIL-C-28748 requirements Wide range of connector styles and sizes: standard c o n n e c t o r s (unloaded), posted
More informationAmphenol. Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors
Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors -2123 Date: 10-01-2004 FOR USE BY BOMBARDIER & BOMBARDIER S SUBCONTRACTORS Amphenol Table of Contents Page
More informationMonobloc Insulator Rectangular Connectors
HYPERMOD NG series Monobloc Insulator Rectangular Connectors Compliant with DIN 43652 Up to 500 mating cycles Quadrax contacts grounding IP50 & IP66 sealing IDEAL FOR RAIL APPLICATIONS The HyperMod NG
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationModular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment.
GM Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. Passenger control Networking and lighting control Diagnostic support for brakes, motors
More informationP Straight PCB Panel Mount Receptacle
How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied
More information06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
More informationreliable economical general characteristics
general characteristics reliable economical inserts in light technopolymer tinned precision contacts enclosures in die-cast aluminum alloy vertical safety closing levers in zinc-plated steel 1 JNE inserts
More informationP Panel Mount Receptacles PIN CONTACTS WITH CRIMP TERMINATION
Crimp Terminated Receptacles, How To Order HOW TO ORDR Sample Part Number L-6P6 MT G Part Number Receptacles PIN CONTACTS WITH CRIMP TRMINATION connectors are designed for rear-panel mounting and are supplied
More informationComponent Specification
1.0 DESCRIPTION OF CONNECTOR AND INTENDED APPLICATION. The M80 series stamped female Trio-Tek open barrel crimp contact and rectangular Trio-Tek crimp housing form part of the Datamate J-Tek range of 2mm
More informationFISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
More informationBLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
More informationMICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More informationCONTACTS The male and female are machined by high conductive copper alloy and could be supplied gold or silver plated. Rated
SPK SPEAKER SPK SYNTAX connectors are available in 4 and 8 pin configuration for speaker array connections and are fully intermateable with CA-COM connectors, commonly used by many speaker enclosures manufacturers.
More informationCircular Connector K Series K-31S K-32S
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Circular Connector K Series CONNECTOR March 2013 Socket Insert Pin Insert Straight Plug K-21C K-22C K-31S K-32S Accessories Dust Cap arrel Adaptor Overview
More informationDirectory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
More informationSSX 19 PIN REVERSE SERIES
SSX 19 PIN REVERSE SERIES The SYNTAX SSX series, designed for professional lighting applications and perfectly compatible with standard Socapex 419 series, is extremely robust being made of thick wall
More informationCONTENTS HMK SERIES X.100 CONNECTORS
HMK SERIES CONTENTS HMK SERIES -.100 X.100 CONNECTORS PAGE 5 Introduction 6 Specifications 7 Ordering Chart - 2 & 3 Row 2 ROW UNINTERRUPTED (17-65 CONTACTS) 8 FC, FD, FS, FW, SC, SD, SS, SW- Socket, Straight
More informationPA Series Sub-Miniature Pushbutton Switches
Sub-Miniature HOW TO ORDER SPECIFICATION: MAX. CURRENT/VOTAGE RATING WITH RESISTIVE OAD: 400mA 32VAC-100mA 50VDC-125mA 125VAC 500mA 48VAC - 200 ma 50VDC - 200mA 250VAC for metal material. INITIA CONTACT
More informationAmphenol LTW FLO Products Series. Market
FLO Series FLO I Product Series Amphenol LTW FLO Products Series A new product line of metal push-pull connector series intermateable with Fischer, Lemo, and ODU. FLO series offers a quick and easy mating
More information8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
More informationCatalog C-001 Rev. G
atalog -001 Rev. G Experience Founded in 1966 Involvement in the development of international connector specifi cations through EI, IE and ISO as well as PIMG. Introduction of new and unique connector
More informationK CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More information1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
More informationD-Sub Connectors. Catalog E /09 Edition 3
www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com Table of Contents General..............................................................................................2
More informationInterconnection Solution Guide. Durability Gold Flash 75 cycles 15µ Gold 125 cycles 30µ Gold 250 cycles Full gold flash 75 cycles
D Amphenol G17 DSub Connector Right Angle PCB Mount Through-hole DSub connectors male and female. Board-locks P/B DSub R/A PCB CONNECTOR Through Hole 2.54mm pitch PC board layout Page D-3 DSub Accessories
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationMICRO-CONNECTOR CMM SERIES
MICRO-CONNECTOR CMM SERIES CMM Series Micro-connectors NICOMATIC specializes in the design, development and manufacture of electronic connectors. The CMM MICRO CONNECTOR interconnection system is a 2mm
More informationTE Connectivity DEUTSCH Single Module EN4165 connectors
Applications Cabin and avionic systems High-performance military aircraft Commercial airlines Communications equipment Missiles Military Railway TE Connectivity DEUTSCH Single Module EN4165 Connectors
More informationInterface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
More informationonlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
More informationSPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.
SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE
More informationAmphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
More information8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationKA Series. MIL-DTL Compliant PCB connectors
MIL-DTL-55302 Compliant connectors Hypertac Hyperboloid Technology Smiths Interconnect offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac (HYPERboloid
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/36 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More information3M CP2 Press-Fit Headers and Sockets, 2 mm
1 of 7 3M CP2 Press-Fit Headers and Sockets, 2 mm A-Style CP2 Connectors CP2-SA110-G1-KR Right Angle Socket Connectors mated to CP2-HA110-GA1-KR Header Connectors 78-5102-0083-1 Revised Date: February
More informationMIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
More informationGalley Connectors. Intermateable and Interchangeable Ability to mate with other ARINC 810 galley connectors in the market
Galley Connectors Intermateable and interchangeable with other ARINC 810 galley connectors, Amphenol Pcd s APeX Galley Connector, Rectangular is a reliable, robust, connector that uses overmold technology
More informationπ network filter insertion loss - attenuation (db)
MI/RFI Applications All electronics equipments Standards oncerned equipments : F, V, MIL-ST 461, GAMG 13 Typical performance capacitive filter π network filter escription Filter connectors have been developed
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationD-subminiature Backshells - Two-Piece D*H Series
Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature
More informationMultipole Low Voltage Connectors
Connectors 4 Introduction Key Features Wide range of body styles and sizes Unsealed, sealed or hermetic etic Signal or power Multipole up to 55 contacts Up to 30 A Standard or inverted polarity Solder,
More informationOur Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
More information7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationTK Distributors SPECIALIST ELECTRICAL SUPPLIERS. mining marine oil transport DEUTSCH CONNECTORS
DEUTSCH CONNECTORS DEUTSCH DT Series An environmentally-sealed connector designed specifically for cable to cable applications on the engine or transmission, under the hood, on the chassis or in the cab.
More informationMale and Female Threads Inch and Metric Steel and Stainless Steel
362 TANAR CAM EVER Male and Female Threads Inch and Metric teel and tainless teel 2 2 1 1 1 1 1 1 A±1 A±1 These cam action lever fasteners allow for quick fastening and unfastening without the use of tools.
More informationR49 SERIES TABLE OF CONTENTS
PRODUCT GUIDE R49 SERIES TABLE OF CONTENTS 3 Product Overview 4 Features Spotlight 5 Code Logic 6 Panel Mount Receptacle Female 7 Panel Mount Receptacle Male 8 Cable Mount Receptacle 9 Bulkhead Mount Receptacle
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More information