INVERTER/CHARGER 1012/1024/1512/1524/2012/2024/3024/ /4048/5048/6048 INVERTER/CHARGER Appliances. Airconditioning Fridge

Transcription

1 INVERTER/CHARGER INVERTER/CHARGER 1012/1024/1512/1524/2012/2024/3024/ /4048/5048/6048 Appliances PC TV Aircnditining Fridge Washing machine

2 TABLE OF CONTENTS General Precautins...1 Persnnel Precautins...1 Intrductin...2 Features...2 Prduct Overview...2 LCD Panel Descriptin...2 Back panel printing descriptin...3 Side panel printing descriptin...3 AC terminal panel printing descriptin...4 Installatin...4 Unpacking and inspectin...4 Preparatin...4 Munting the Unit...4 Operatin...8 Operatin key instructins...8 Setting key instructins...8 LCD display...10 Operating mde descriptin...11 AGS functin...11 AGS functin infrmatin...11 Dry cntact perating vltage...12 BTS functin...12 BTS functin descriptin...12 Cnnect inverter and battery...12 Cmmunicatin Upper Cmputer Mnitring directins...12 The peratin steps are as fllws...12 Specificatins...14 Inverter Mde Specificatin...14 AC Mde Specificatin...15 Charge Mde Specificatins...15 Fault Mde...16 Truble shting...17 LCD display instructin When inverter alarm, even it back t recvery mde. We must restart inverter t clear fault. Fault cde Fault Fan fault Over temperature DC vltage t high DC vltage t lw Output shrt circuit in DC mdel Output ver vltage Output ver lad Output ver current Output lw vltage in DC mdel Fault instructin Fan stp run Output shrt circuit: shrt circut test fault 05 Output ver vltage: V utput>135v/270v 500ms fault 06 verlad: 100%<Lad<110% alarm per every secnd (5min later inverter cutff utput and fault 07) 110%<Lad<125% alarm per every secnd (60s later inverter cutff utput and fault 07) Lad>125% alarm per every secnd (10s later cut ff utput and fault 07) Inverter Output ver current: 1-3K: I rms>40a. 4-6K: I rms>80a 200ms fault 51 Output lw vltage: V utput<85v/170v 500ms fault 58 Truble shting If machine enters int fault mde, please remve input pwer. And accrding t the table, deal with the fllwing prblems. LED/Buzzer LCD Explanatin / Pssible cause What t d Buzzer beeps cntinuusly and red LED is n Fault cde 01 Fan stp run Check the fan. Fault cde 02 Temperature f machine is t high. Pwer ff and waiting fr minute Fault cde 03 Battery vltage is t high. Check the battery specificatins Fault cde 04 Battery vltage is t lw. Check the battery specificatins Fault cde 05 Output shrt circuited Remve yur lad and restart Fault cde 06 Inverter utput vltage is high. Fault cde 07 Over lad Decrease yur lad Fault cde 51 BTS ver temperture: T battery>65 C 1s 1 time fr 1min then fault alarm 02; T battery<60 C recvery Inverter ver temperture: T >90 C 1s1time fr 1min then fault alarm 02; T <85 C recvery inv Battery ver vltage: DC>V(charge vltage+1v)/12v alarm fr 30s then fault cde 03 Over vltage recvery: DC<V (charge vltage+1v)-0.2v/12v Lw vltage alarm: DC<V (cutff+0.5v)/12v Alarm recvery: DC>V (cutff+0.5)+0.2/12v Lw vltage fault: DC<V cutff fault cde 04 Output ver current Return t repair center Fault cde 58 Output vltage is t lw. Decrease yur lad inv Check if wiring is cnnected well and remve abnrmal lad. -17-

3 Charge mde: Charge current adjustable Charge cureent adjustable: 10A~max (adjust by every 5A) Battery vltage Shrt circuit prtectin Over charge prtectin rule Charge Stage Transitin Definitin Fault Mde LED instructin LED LED state infrmatin Off N AC input LED AC(green) LED Inv(yellw) LED Fault(red) BUZZER instructin Buzzer state Buzzer ff Buzzer beep Buzzer n vltage charge vltage cure max current On Blink Off On Off On Blink Vdc/20-29Vdc/40-58Vdc breaker Bat V charge vltage+1v/battery,1s 1 time fr 30s then alarm 03 Bst CC Bst CV Bst FV Bst CC Stage: If A/C input is applied, the charger will run at full current in CC mde until the charger reaches the bst vltage. Bst CV Stage: the charger will keep the bst vltage in Bst CV mde until the charge current less 6A cntinue 1minute r keep the bst vltage time mre than 2hurs. Then drp the vltage dwn t the flat vltage. Flat Stage: In flat mde, the vltage will stay at the flat vltage. If the A/C is recnnected, the charger will reset the cycle abve. CC charge cure CV max 2hurs charge vltage cure FV stage1 stage2 stage3 current I<6A after 1min r CV mre 2hurs AC nrmal AC ver range Inverter mde nrmal fault cautin infrmatin nrmal cautin fault WARNING! This manual cntains imprtant instructins fr all Inverter/Charger mdels that shall be fllwed during installatin and maintenance f the inverter. The fllwing cases are nt within the scpe f warranty 1. Out f warranty. 2. Series number was changed r lst. 3. Battery capacity was declined r external damaged. 4. Inverter was damaged caused f transprt shift, remissness, ect external factr 5. Inverter was damaged caused f irresistible natural disasters. 6. Nt in accrdance with the electrical pwer supply cnditins r perate envirnment caused damage. General Precautins Befre using it, read all instructins and markings: (1) inverter (2) battery (3) user manual CAUTION: 1. T reduce risk f injury, charge nly lead-acid rechargeable batteries. If custmer use flded batteries, batteries must be maintained regularly. Other battery types may cause damage and injury. 2. D nt expse it t rain, snw r any type liquids. Inverters are designed fr indr use. 3. D nt disassemble it. Take it t qualified service center when service r repair is needed. 4. T prevent the risk f electric shck, discnnect all wiring befre attempting any maintenance r cleaning. Only turning ff the unit will nt reduce the risk. WARNING: 1. Prvide ventilatin frm the battery cmpartment t utdrs. The battery enclsure shuld be designed t prevent accumulatin and cncentratin f hydrgen gas at the tp f the cmpartment. 2. NEVER charge a frzen battery and cnnect such 12V/24V/48V batteries t inverter. 3. Input/utput AC wiring mustn t be less than 12AWG and nt rated fr 75 C r higher. Battery cable mustn t be rated fr 75 C r higher and shuld be n less than 4AWG /6AWG gauge. 4. Pay special attentin when wrking with metal tls arund batteries. Batteries shrt-circuiting culd cause an explsin. 5. Read the battery installatin and maintenance instructins carefully befre perating. Persnnel Precautins 1. Better t prepare plenty f fresh water and sap nearby in case battery acid cntacts skin, clthing r eyes. 2. Avid tuching eyes while wrking near batteries. 3. NEVER smke r allw a spark r flame near batteries. 4. Remve persnal metal items such as rings, bracelets, necklaces, and watches when wrking with batteries. Batteries may prvide heavy shrt-circuit current, which wuld be enugh t make metal melt and causes severe burn. 5. If a remte r autmatic generatr start system is used, disable the autmatic starting circuit r discnnect the generatr t prevent accident during servicing

4 Intrductin This inverter is applicable t different markets demands, it matches different vltage AC 120V/240V, als can set utput vltage, frequency, charging vltage, charging current, it s available t wrk in split phase pwer envirnment. Features: Pure sine wave utput Friendly user interface 3 Steps charging MFD (multi-functin display) Overlad and shrt-circuit prtectin Set charging vltage/charging current. Battery lw vltage shutdwn pint can be set t 10/10.5/11V Pwer-save mde Set utility pririty/ Battery pririty Set utility input wide/narrw range Inverter vltage can be set t 110/115/120 Inverter frequency can be set t 50/60Hz Set utility charging n/ff switch LCD Panel Descriptin High vltage alarm Save mde AC Mde Specificatin AC parameter Input wavefrm Nminal input vltage Max input vltage Input frequency Output wavefrm Overlad prtectin Output shrt circuit Efficiency(AC mde) Transfer time AC TO DC Transfer time DC TO AC AC input vltage range: (±5V) Add +1V/battery: (high vltage ne secnd ne time/after 30s fault 03) ( V) + 1V fr 12V mdel ( V) + 2V fr 24v mdel ( ) + 4V fr 48v mdel Lad 40W(110V)/80W(220V) Pure sine wave 220Vac / 230Vac / 240Vac 270Vac MAX 50HZ/60HZ (aut sensing) Same as input wavefrm Breaker + sftware prtectin Breaker+ sftware prtectin >95% lad, full battery) 15ms(max) 15ms(max) mdel range Lw cutff Lw recver High cutff High recver 9 220V narrw wide AC<180V F<40HZ AC<140V F<40HZ AC>190V F>45HZ AC>150V F>45HZ AC>270V F>70HZ AC>270V F>70HZ AC<265V F<65HZ AC<265V F<65HZ Charge Mde Specificatins Max charge current: (±5A) mdel 1K 1.5K 2K 3K 4K 5K 6K V 30A 45A 60A 24V 20A 25A 30A 40A 60A 1 48V 20A 30A 35A 40A Min charge current 10A. change by every 5A. INVERTER Charge mde AC range: Setting Lw vltage Charge mde recver Charge mde AC>265V Stp charge AC<260V Charge recver 1. Switch ON/OFF: POWER ON/OFF Switch 2. MENU 3. UP 4. DOWN 5. ENTER 6. AC LED 7. INV LED 8. FAULT 9. LCD 220V AC wide range AC<155V Stp charge 40<F<70HZ charge AC>160V Charge recver

5 AC INPUT PROTECT AC INPUT PROTECT USB REMOTE PORT The SlarPwerMnitr will aut scan cmmunicatin prt. Back panel printing descriptin: Ep Data Primary AppParamters Themes Prts Inf Pc1600 primary setting COM7:Ntwrking COM3:ReadWrite Grid vltage 0 V Battery vltage 13.2 V Scan fr Device Grid frequency 0 Hz Battery current A Lcal COM3 EP3300 External Output vltage V Battery temperature 0 C 1 Output frequency 50 Hz Battery SOC 92 % Machine Inf Lad current 0 A Transfrmer TEMP 28 C Machine type EP3300 Lad pwer 0 W Buzzer state Nrrnal Sftware versin Rated pwer ** 2000 W Lad percent 0 % Wrk state BACKUP 6 1-3K Back Panel Battery class 12 V System fault System alarm Battery Vltage Wait fr a mment, Pwer Mnitr will wrk nrmally. 48VDC Mnitr sftware functin peratin Specific functin Operatins f the mnitring sftware, please refering t the HELP dcs after the cnnectin is successful. 1 Battery Negative Specificatins Inverter Mde Specificatin Mdel Rated pwer(w) Pwer Factr Wave frm Output vltage RMS Output frequency Inverter efficiency(peak) Overlad Surge rating Capable f starting electric mtr Battery vltage Minimum start vltage Lw battery cut ff Lw battery alarm 1KW 1.5KW 2KW 3KW 4KW 5KW 6KW 1 Pure sine wave 110V/115V/120VAC(220V/230V/240VAC)±10% 50HZ r 60HZ (±0.3HZ) >80% 100%<Lad<110% (alarm 5min then stp utput and fault cde 07) 110%<Lad<125% (alarm 60s then stp utput and fault cde 07) Lad>125% (alarm 10s then stp utput and fault cde 07) 3000VA 4500VA 6000VA 9000VA 12000VA 15000VA 15000VA 1P 1.5P 1.5P 2P 3P 12VDC/ /48VDC 48VDC 11VDC/22VDC/44VDC (lw vltage fault cde04) 10/10.5/11V fr 12V mdel 20/21/22V fr 24V mdel 40/42/44V fr 48v mdel Add 0.5V/battery: (lw battery alarm ne secnd ne time) (10/10.5/11V) +0.5Vdc fr 12V mdel (20/21/22V) +1Vdc fr 24v mdel (40/42/44V) +2Vdc fr 48v mdel 1. Battery -/+ 2. REMOTE PORT 3. BTS 4. AGS Side panel printing descriptin: HOT1 N HOT2 N HOT1 HOT AC Side Panel 4-6K Back Panel 5. USB 6. AC INPUT PROTECT: Input prtect breaker 120V/15A MAX 5 Battery Psitive 1. :HOT1 -N120VAC/110 VAC/115VAC 2. : HOT2 -N120VAC/110 VAC/115VAC 3. :HOT1 -HOT2240VAC/220 VAC/230VAC 4. AC INPUT:HOT1 -HOT2240VAC/220 VAC/230VAC 5.15AMAX JFCI/NEMA 5-15R Output 110V/115V/120V Scket

6 AC terminal panel printing descriptin V/230V/240V CLIP V/115V/120V CLIP 3. AC INPUT 220V/230V/240V CLIP Install the sftware: Slar Pwer Mnitr Put the CD in the cmputer CD driver, install the sftware Slar Pwer Mnitr (Prper install fllwing the steps) SlarPwerMnitr Setup dtnetfx40-full-x86-x64.exe msi.msi msi1.cab SarPwerMnit.exe AC terminal panel Installatin Unpacking and inspectin Befre installatin, please inspect whle unit. Be sure that nthing inside the package is damaged. Yu shuld have received the fllwing items inside f package. User manual X 1 Sftware CD X 1 Cmmunicatin cable X 1 Battery cables (RED/BLACK) X 2 Chse Slar Pwer Mnitr. exe and install. SlarPwerMnitr Setup Advanced Installer Preparatin Befre cnnecting all wirings, please take ff bttm cver by remving eight screws as shwn belw: SarPwerMnit has been successfully installed. x C rm Open the PwerMnitr,turn n the machine. Munting the Unit Cnsider the fllwing pints befre selecting where t install: D nt munt the inverter n flammable cnstructin materials. Munt n a slid surface. Install this inverter at eye level in rder t read the LCD display clearly. Fr prper air circulatin t dissipate heat, require a clearance abut 50 cm t the side and 80 cm abve and belw the unit. The ambient temperature shuld be between 0 C and 40 C t ensure ptimal peratin. The recmmended installatin psitin is t be adhered t the wall vertically. Be sure t keep ther bjects and surfaces as shwn in the diagram t guarantee sufficient heat dissipatin and t have enugh space fr remving wires. SUITABLE FOR MOUNTING ON CONCRETE OROTHER NON-COMBUSTIBLE SURFACE ONLY. Desktp shrtcut Icn Sar Pwer Mnitr.exe PwerMnitr seach Data Prts Scan fr Device Lcal << AppParamters Themes Help searching

7 Dry cntact perating vltage Set Lw Shutdwn Vltage Operatin Vltage Restring Vltage Install the unit by screwing fur screws 10V/20V/40V DC<10.5V/21V/42V DC>13.5V/27V/54V 10.5V/21V/42V DC<11V/22V/44V DC>13.5V/27V/54V 11V/22V/44V DC<11.5V/23V/46V DC>13.5V/27V/54V That is when the dry cntact is engaged at DC<set lw shutdwn pint + 0.5V (battery lw vltage warning pint), at DC>13.5V. (12V mdel) BTS functin BTS functin descriptin: The inverter cllects the battery temperature thrugh the BTS prt, based n 25 Cwith each rise f 1 C, the charging vltage drps by 18mV/1 at the set charging vltage (up t 60 C). BTS dwn charge vltage is based n drps f bst vltage and flat vltage. Using an ptinal battery temperature cable t cnnect the inverter and battery. USB Bts wire Cmmunicatin Upper Cmputer Mnitring directins: Mdel EP3300LV use the mnitring sftware: Slar Pwer Mnitr fr cmmunicatin. This sftware supprts the cmmunicatin functin fr varius mdels f ur cmpany. The sftware will send the COM Prt and inverter mdel autmatically. The peratin steps are as fllws: Cnnect the Inverter and Cmputer. Cnnect the inverter with a cmmunicatin cable t the cmputer with RS232 cmmunicatin prt. (If the cmputer des nt have RS232 cmmunicatin prt, then yu need t use RS232 t USB cmmunicatin adapter fr cnnectin, and need t install RS232 t USB cmmunicatin drive). USB Usb wire 1-3K Inverter Case 4-6K Inverter Case DC Wiring Suggestin It is suggested t keep battery bank as clse as pssible t inverter. battery cable length 1m is suggested. Please find fllwing minimum wire size. If DC cable lnger than 1 m, please use thicker battery cables t bear pwer current ging thugh. Mdel Battery VltageType Wire Type 1KW 1.5KW 2KW 12VDC 12VDC 12VDC 6AWG 6AWG 4AWG 6AWG 2AWG 4AWG Mdel 3KW 4KW 5KW 6KW Battery Vltage Type 48VDC 48VDC 48VDC 48VDC Wire Type 3AWG 6AWG 2AWG 4AWG 3AWG 3AWG Please cnnect cable size thicker enugh, r cnnect several cmbined thin cables tgether t be same strng. Battery bank shuld be kept clse t inverter; The shrter and thicker cables, the better the system perfrmance. Please fllw battery cnnectin steps belw: Assemble battery ring terminal. Cnnect all battery packs as units requires. Battery cable and terminal size suggestin: It's suggested t cnnect at least 100Ah capacity battery pack fr 1KW-3KW mdels, at least 200Ah fr 4KW-6KW mdels. NOTE: Please nly use sealed lead acid battery r sealed GEL/AGM lead-acid battery. Insert the ring terminal f battery cable int inverter t battery cnnectr, make sure the blts are tightened with trque f 2-3Nm. Pay special attentin t battery back and inverter are cnnected rightly, als ring terminals are tightly screwed t the battery terminals

8 Operating mde descriptin Operatin mde Descriptin LCD display Fault mde If any fault has happened, the machine will enter t the mde. And fault cde is displayed n the LCD. Line mde Input pwer will prvide energy t lad directly. And it will charge the battery at the same time. If vltage f input pwer is utside f sectin, the machine will switch t battery mde. WARNING: Shck Hazard Installatin must be perfrmed with care due t high battery vltage in series. CAUTION!!D nt place anything between the flat part f the inverter terminal and the ring terminal. Otherwise, verheating may ccur. CAUTION!!D nt apply antixidant substance n the terminals befre terminals are cnnected tightly. CAUTION!! Befre making the final DC cnnectin r clsing DC breaker/ discnnectr, be sure psitive(+) must be cnnected t psitive(+) and negative(-) must be cnnected t negative(-). AC Input/Output Cnnectin CAUTION!! Befre cnnecting t AC input pwer surce, please install a separate AC breaker between inverter and AC input pwer surce. This will ensure inverter can be discnnected safely during maintenance and fully prtected frm ver current f AC input. Suggestin AC breaker: 50A fr 1KW-3KW, 80A fr 4KW-6KW. CAUTION!! Please dn't cnnect the utput wring t "Grid" terminal r cnnect the grid wring t the "Lad" terminal. WARNING! All wiring must be perfrmed by a qualified persnnel. WARNING! It's very imprtant t use apprpriate cable fr Grid cnnectin fr system safety and efficient peratin. T reduce injury risk, please use the prper suggested cable size as belw. Battery mde The unit will get energy frm battery and prvide t lad. AGS functin AGS functin infrmatin The AGS functin is that the inverter will start the generatr autmatically via the dry cntact when the battery is lw vltage. Nte: The generatr must have dry cntact functin. If yu cnnect AC grid and Generatr t Inverter input at the same time, the interlck device shuld be installed between generatr utput and inverter input. (T ensure the utility and generatr will nt prvide pwer t inverter at the same time. It desn t need t be installed if nly cnnect generatr). PC AC Wiring We recmmend using 10-16AWG wire t cnnect AC terminal blck. There are 3 different ways t cnnect AC wire t terminal blck. All wirings are CE cmpliant, call ur tech supprt if yu are nt sure abut hw t wire any part f yur inverter. TV Lad Interlck unit AC INPUT Pwer Grid AC Wiring 1-6KW 120V/240V single phase Input: HOT1 +HOT2 + G Output 120V: HOT1 +N + G Output 120V: HOT2 +N + G Output 240V: HOT1 +HOT2 + G HOT1 N HOT2 N HOT1 HOT2 Air-cnditining Fridge BAT INPUT BAT CHARGER Generatr Battery Washingmachine Suggested cable requirement fr AC wires Mdel 1-3KW 4-6KW Gauge 12-14AWG 10-12AWG Trque Value Nm Nm

9 LCD display: The sftware material N. & versin N shall be displayed n LCD Screen when switch n. Default Page: Output Vltage and Output Frequency. The Battery vltage and rated pwer shall be displayed n the LCD screen when switch n. As this shwn in Screen:3024 Input Vltage and Input Frequency. Please fllw steps belw t implement Lad/Grid cnnectin: Befre Lad/Grid cnnectin, be sure t pen DC prtectr first. Remve insulatin sleeve 10mm fr six cnductrs. And shrten phase L and neutral cnductr N 3 mm. Insert grid wires accrding t plarities indicated n terminal blck and tighten terminal screws. Be Sure t cnnect PE prtective cnductr( )first. AC INPUT Cnnectin Grund (yellw-green) HOT1 (brwn r black) HOT2 (brwn r black) HOT2 HOT1 HOT1 N N HOT2 L Battery Vltage and Current. Lad Pwer and Percentage. WARNING: Be sure that AC pwer surce is discnnected befre hard-wire it t the unit. BAT and Inverter Temperature Then, insert Lad wires accrding t plarities indicated n terminal blck and tighten terminal screws. Be sure t cnnect PE prtective cnductr( )first Cnnectin Grund (yellw-green) HOT1 LINE (brwn r black) N Neutral (blue r white) HOT2 LINE (brwn r black) HOT2 L HOT1 N N HOT1 HOT2 HOT2 HOT1 N N HOT1 HOT2 HOT1 L N HOT2 N HOT1 HOT1-N HOT2-N HOT1-HOT2 Make sure the wires are securely cnnected CAUTION: Appliances such as air cnditiner are required at least 2-3 minutes t restart because it's required t have enugh time t balance refrigerant gas inside f circuits. If a pwer shrtage ccurs and recvers in a shrt time, it will cause damage t yur cnnected appliances. T prevent this kind f damage, please check manufacturer f air cnditiner if it's equipped with time-delay functin befre installatin. Otherwise, this inverter will be triggered verlad fault and cut ff utput t prtect yur appliance but smetimes it still causes internal damage t the air cnditiner

10 Operatin 13 AC charging setting Rated current(default) 10A~Rated current. Regulatin step 5A 17 Bst vltage setting 14.1V(default) Range f adjustment V 13.5V(default) Range f adjustment V 18 Flating charging setting 19 Battery lw vltage shutdwn pint setting 10.5V(default) Range f adjustment 10-11V INVERTER Operatin key instructins: Switch buttn t cntrl the machine On and ff. There are fur buttns: MENU, UP, DOWN, ENTER. Via UP and DOWN can check the varius parameters display. Lng press MENU t enter the setting menu page, MENU and ENTER turn ver the menu page, UP and DOWN t set the parameters. After setting, lng press ENTER 2s t exit, except the inverter frequency and inverter vltage parameters, The setting parameters are nt saved t the EEPROM. The EEPROM is saved nly when the parameters are nrmally set. (T ensure that the parameters can be successfully saved, s every time after setting the parameters need restart the machine) SBU Battery lw vltage pwer pint SBU Battery high vltage inverter pint LCD back light settings 11.5V(default) 13.5V(default) LCD ON LCD OFF(default) Range f adjustment V If yu chice SBU, when the battery vltage less than value, the inverter will wrk in AC mdel Range f adjustment 13V-14.0V If yu chice SBU, when the battery vltage mre than value cntinue 1min, the inverter will wrk in DC mdel. The LCD back light n. Press any buttn t light up cntinue 1min. Setting key instructins: MENU Functin key Functin descriptin Utility pririty(default) If chice UTI, the inverter wrk in AC mdel until AC cut ff r ver the AC range. 24 Buzzer switch settings Buzzer ON(default) Buzzer OFF 01 Battery/AC pririty setting Battery pririty vde: Wide(default) The inverter wrk in AC mdel if battery less 20set value. The inverter wrk in DC mdel if battery mre than 21set value cntinue 1min. If set Wide, the AC range V. 27 Save mde switch settings SEN Sdi(default) Save mde enable inverter is set t detect the lad every 5/30 secnds Save ff The save mdel disenable Utility pwer range setting Inverter vltage setting NRU: Narrw 110V(default) If set NRU,the AC range V. (110/115/120) Search time settings in Save mde AC charging switch settings 5s(default) 5s inverter is set t detect the lad every 5 secnds. 30s inverter is set t detect the lad every 30 secnds. AC charging n(default) AC charging ff 50HZ(default) 60HZ UP Page up key 04 Inverter frequency setting DOWN Page dwn key ENTER Cnfirm the exit key