SERIES GRK PARALLEL GRIPPERS
|
|
- Marybeth Weaver
- 5 years ago
- Views:
Transcription
1 GRK SERIES GRK PARALLEL GRIPPERS Ideal for Assembly and Robotics Highest Grip Force Its Class Precision Jaw Movement High Moments Highest Grip Force to Height Ratio Precision Jaw Movement Wear Compensatg Over Life of Unit High Moment Capacity Allows for Longer Toolg and Greater Part Weights GRK01 A Patent Pendg
2 ORDERING DATA: SERIES GRK PARALLEL GRIPPERS INDEX: Orderg Data Page 2 Benefits Page 3 Dimensions Pages 4 and 5 Engeerg Data Pages 6 to 9 Options & Accessories Pages 10 to 16 TO ORDER SPECIFY: Product, Design No., Size, Mimum Total Jaw Travel, and any options required. DESIGN NO. 1 - Imperial 5 - Metric GRK - 1 OPTIONS (Omit if not required) L11-UB99 - Manifold option location 99 CB1-8 Threaded Inductive Proximity Switch Ready with one switch mountg bracket CB2-8 Threaded Inductive Proximity Switch Ready with two switch mountg brackets V1 - Fluoro-Elastomer & PTFE Gasket & Seals FSR2 - Sprg assist close FSE2 - Sprg assist open 15 STANDARD PORT IN LOCATION x 12 - L11-UB99 99 OPTION: MANIFOLD IN LOCATION 99 PRODUCT High Precision Parallel Jaw Travel High Moment Capacity High Grip Force to Height Ratio NOTE: Design No. dicates imperial or metric mountg holes, dowel p holes, and ports. PRODUCT SIZE EQUIVALENT BORE DIA. ch MINIMUM TOTAL JAW TRAVEL Total Travel Per Bore Size ch equivalent TOTAL JAW TRAVEL = OPEN POSITION - CLOSED POSITION JC1STP-2 JC1STP-K POSITION TEACHABLE MAGNETIC SWITCHES SWITCH DESCRIPTION PNP (Source), Solid State, VDC, 2 meter cable PNP (Source), Solid State, VDC, Quick Connect MATCHING CORDSET DESCRIPTION M8, 4 p, Straight Female Connector, 5 meter cable OPEN POSITION CLOSED POSITION JC1SDP-5 JC1SDP-K JC1SDN-5 JC1SDN-K MAGNETIC SWITCHES SWITCH DESCRIPTION PNP (Source), Solid State, VDC, 5 meter cable PNP (Source), Solid State, VDC, Quick Connect NPN (Sk), Solid State, VDC, 5 meter cable NPN (Sk), Solid State, VDC, Quick Connect MATCHING CORDSET DESCRIPTION M8, 3 p, Straight Female Connector, 2 meter cable M8, 3 p, Straight Female Connector, 5 meter cable 8 THREADED INDUCTIVE PROXIMITY SWITCHES SWITCH DESCRIPTION 8 Threaded Inductive Proximity Switch NPN (Sk) VDC, 2 meter cable 8 Threaded Inductive Proximity Switch PNP (Source) VDC, 2 meter cable Copyright 2010, by PHD, Inc. All Rights Reserved. Prted the U.S.A.
3 SERIES GRK PARALLEL GRIPPERS available long or short jaw travels for maximum application flexibility hardened steel jaws with precision dowel holes for accurate mountg of toolg staless steel cover protects magnetic target from debris staless steel cover provides protection of jaws on top and sides of gripper and retas lubrication hardcoated alumum body for superior wear resistance hardened steel cam driver provides high grip force and synchronous jaw movement standard unit cludes magnet for use with two-position teachable or sgle position switches proximity switch target and mountg brackets are optional for use with ductive proximity switches large oval bore provides highest average grip force to height ratio its class ternal speed control, no external flow controls required fluoro-elastomer and PTFE gasket and seals are available for fluid compatibility wear-compensatg jaw guide system provides highest precision of jaw alignment over life of gripper manifold capable for creased mountg flexibility On average 30% higher grip forces than previously cataloged! Sprg assist available on open or close. See pages 10 and 11 for detailed formation. Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system elimates jaw freeplay and dramatically reduces jaw deflection when grippg or movg loads over life of unit. True parallel jaw motion simplifies jaw toolg and is ideal for centerg parts of various sizes. H7-tolerance dowel p holes cluded for accurate alignment of toolg and gripper mountg. Rugged construction ensures long operatg life. Two grip force/jaw travel combations available for each size of gripper. Double actg for use both ternal and external grippg applications. Manifold portg capability allows for nested gripper stallation. Mountg provided from top, bottom, front and back of gripper. Available with metric and imperial mountg threads and ports. Supplied switch-ready for easy tegration of optional magnetic position sensg switches. Magnetic sensg for new two-position teachable switch available to simplify set-up and tegration. Two teachable positions per switch. Inductive proximity switches available for discrete dication of jaw position (option -CB). Standard four workg day delivery reduces tegration time. Industry/Process Uses Assembly mache and mache builders Robotic tegrators Automotive Medical device manufacture Semiconductor manufacture Laboratory processg applications Clampg and fixturg durg assembly operations Centerg and registration of parts Incorporation to space restricted processg and manufacturg equipment Precision Jaw Movement- Wear-compensatg over life of unit High Moments - Provides for longer toolg and greater part weights High Grip Force to Height Ratio - Significantly greater range of part handlg 3
4 DIMENSIONS: SERIES GRK PARALLEL GRIPPERS K8 K13 K11 K9 K10 2X K6 THD 2X K [H7] DOWEL PIN HOLE 3 K5 4 C L 2 K4 C L 1 K3 2X K [H7] DOWEL PIN HOLE 4X K1 THD B2 CLOSE PORT K19 P2 5 2X P1 PORT OPEN PORT B3 K17 K18 P3 B4 B5 J8 6 B1 2X THRU HOLE FOR K16 MOUNTING FASTENER K14 J3 4X THRU HOLE FOR K12 MOUNTING FASTENER K15 J4 J5 J7 J6 *A CLOSED A OPEN (SHORT) A OPEN (LONG) 4X J1 THD 4X J [H7] DOWEL PIN HOLE 4
5 DIMENSIONS: SERIES GRK PARALLEL GRIPPERS LETTER DIM MIN. TRAVEL PER JAW (SHORT) MIN. TRAVEL PER JAW (LONG) A CLOSED* A OPEN SHORT* A OPEN LONG* B1 B2 B3 B4 B5 J1 J2 J3 J4 J5 J6 J7 SHORT J7 LONG J8 K1 K2 K3 K4 K5 K6 K7 K8 K9 K10 K11 K12 K13 K14 K15 K16 K17 K18 K19 P1 P2 P3 GRK-x-35 X 6.5 or x.236 DP.1259 x.125 DP x.394 DP.1571 x.197 DP /4-20 x.500 DP.1571 x.197 DP # # M4 x 0.7 x 6.0 DP 3.0 x 3.1 DP M5 x 0.8 x 10.0 DP 4.0 x 5.0 DP M6 x 1.0 x 12.7 DP 4.0 x 5.0 DP M M M5 x MODEL NUMBER GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or x.295 DP.1571 x.158 DP /4-20 x.500 DP.1884 x.197 DP /16-18 x.630 DP.1884 x.197 DP # / M5 x 0.8 x 7.5 DP 4.0 x 4.0 DP M6 x 1.0 x 12.7 DP 5.0 x 5.0 DP M8 x 1.25 x 16.0 DP 5.0 x 5.0 DP M M M5 x /4-28 x.295 DP.1571 x.158 DP /16-18 x.630 DP.2509 x.25 DP /16-18 x.630 DP.2509 x.25 DP / / /8 NPT M6 x 1.0 x 7.5 DP 4.0 x 4.0 DP M8 x 1.25 x 16.0 DP 6.0 x 6.3 DP M8 x 1.25 x 16.0 DP 6.0 x 6.3 DP M M /8 BSPP /16-24 x.394 DP.1884 x.197 DP /16-18 x.630 DP.2509 x.250 DP /8-16 x.787 DP.2509 x.250 DP / / /8 NPT M8 x 1.25 x 10.0 DP 5.0 x 5.0 DP M8 x 1.25 x 16.0 DP 6.0 x 6.3 DP M10 x 1.5 x 20.0 DP 6.0 x 6.3 DP M M /8 BSPP NOTES: 1) DESIGNATED C L IS CENTERLINE OF UNIT 2) METRIC INFORMATION SHOWN IN [ ] 3) CIRCLED NUMBERS INDICATE POSITIONS 4) *A OPEN REFLECTS SMALLEST POSSIBLE OPEN DIMENSION A CLOSED REFLECTS LARGEST POSSIBLE CLOSED DIMENSION 5) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED 5
6 ENGINEERING DATA: SERIES GRK PARALLEL GRIPPERS SERIES GRK SPECIFICATIONS IMPERIAL METRIC OPERATING AIR PRESSURE STANDARD UNIT 36 psi m. to 120 psi max. 2.5 bar m. to 8 bar max. SPRING ASSIST UNIT 66 psi m. to 90 psi max. 4.6 bar m. to 6.2 bar max. OPERATING TEMPERATURE -20F m. to +180F max. -28C m. to +82C max. GRIP REPEATABILITY.0004 ch of origal position.01 of origal position RATED LIFE 10 million cycles with standard seals LUBRICATION Factory lubricated for rated life SIZE 35 x x x 8 46 x x x x x 26 MINIMUM TOTAL JAW TRAVEL TOTAL CLOSE GRIP FORCE AT 87 psi [6 bar] lb N GRIPPER WEIGHT lb kg DISPLACEMENT 3 cm CLOSE OR OPEN TIME AT 87 psi [6 bar] sec MAXIMUM TOOLING LENGTH GRIP FORCE FACTOR INTERNAL GRIP EXTERNAL GRIP IMP MET IMP MET UNIT 35 x 6.5 FSR2 35 x 6.5 FSE2 35 x 12 FSR2 35 x 12 FSE2 46 x 8 FSR2 46 x 8 FSE2 46 x 16 FSR2 46 x 16 FSE2 58 x 10.5 FSR2 58 x 10.5 FSE2 58 x 20 FSR2 58 x 20 FSE2 75 x 12.5 FSR2 75 x 12.5 FSE2 75 x 26 FSR2 75 x 26 FSE2 SPRING ASSIST GRIP FORCE SF (SPRING ONLY)* SPRING CLOSE GRIP FORCE SF (SPRING ONLY)* SPRING OPEN GRIP FORCE MINIMUM MAXIMUM MINIMUM MAXIMUM lb N lb N lb N lb N SPRING ASSIST WEIGHT ADDER lb kg CLOSE OR OPEN TIME AT 87 psi [6 bar] IN SECONDS WITH SPRING AGAINST SPRING SPRING ONLY *Sprg force (SF) varies with sprg compression. The mimum sprg grip force values occur with the sprg at least compression (jaws fully closed on sprg close units and fully open on sprg open units). The maximum sprg grip force values occur with the sprg at most compression (jaws fully open on sprg close units and fully closed on sprg open units)
7 ENGINEERING DATA: SERIES GRK PARALLEL GRIPPERS SIZE AXIAL FORCE Fa lb N MAXIMUM INDIVIDUAL MOMENTS Mx My Mz Nm lb Nm lb lb Nm Fa Fa: Total for both jaws Mx: Maximum allowable moment per jaw, relative to the jaw mountg surface My: Maximum allowable moment per jaw, relative to the geometric center of the jaw dowel hole pair Mz: Maximum allowable moment per jaw, relative to the jaw mountg surface When calculatg the value for Fa, clude the toolg weight, part weight, external forces, and accelerations. When calculatg values for Mx, My, and Mz, clude the grip force per jaw, toolg weight, part weight, external forces, and accelerations as applicable. Mz Mx My Mx My RECOMMENDATIONS Design toolg so that the grip pot is as close to the gripper surfaces as possible. The grip force factor (Gf) values given the table on page 6 are for zero toolg length. As the grip pot is moved away from the jaw surface, the applied moment causes jaw friction to crease, resultg reduced effective grip force. Use the toolg length factor chart on the followg page to calculate the effective grip force for a specific grip pot. The maximum load that grippers can handle will vary based on: size of the part beg picked up, shape of the part, texture of the part, speed at which the part is transferred, workg pressure, shape of the fgers, etc. TOOLING LENGTH FACTOR As the grip pot is moved away from the jaw surface, the grip force is reduced due to additional friction generated by the grip duced moment. The toolg length factor allows calculation of the grip force at any grip pot. The graph also dicates the maximum toolg length for each gripper size. TOOLING LENGTH FACTOR GRIP force CALCULATION Equations: [25.4] [50.8] [76.2] [101.6] [127.0] [152.4] [177.8] [203.2] TOOLING LENGTH [] GRK35 GRK46 GRK58 GRK75 IMPERIAL: Total Grip Force [lb] = (Pressure [psi] x Gf) x Toolg Length Factor Total Grip Force With Sprgs [lb] = ((Pressure [psi] x Gf) ± SF [lb]) x Toolg Length Factor METRIC: Total Grip Force [N] = (Pressure [bar] x Gf) x Toolg Length Factor Total Grip Force With Sprgs [N] = ((Pressure [bar] x Gf) ± SF [N]) x Toolg Length Factor 7
8 ENGINEERING DATA: SERIES GRK PARALLEL GRIPPERS GRIP FORCE Total grippg force relative to toolg length is shown below at 87 psi [6 bar] pressure. Grip force per jaw equals the total grip force divided by two. The graphs also dicate the maximum toolg length for each gripper size. TOTAL GRIP FORCE lb [N] 140 [622.7] 120 [533.8] 100 [444.8] 80 [355.9] 60 [266.9] 40 [177.9] 20 [89.0] 250 [1112.1] GRK35 12 LONG TRAVEL [12.7] [25.4] [38.1] [50.8] [63.5] [76.2] [88.9] [101.6] TOOLING LENGTH [] GRK46 16 LONG TRAVEL On average 30% higher grip forces than previously cataloged! TOTAL GRIP FORCE lb [N] 200 [889.6] 150 [667.2] 100 [444.8] 50 [222.4] Sprg Open Sprg Close Open Close 350 [1556.9] [12.7] [25.4] [38.1] [50.8] [63.5] [76.2] [88.9] [101.6] [114.3] [127.0] TOOLING LENGTH [] GRK58 20 LONG TRAVEL TOTAL GRIP FORCE lb [N] 300 [1334.5] 250 [1112.1] 200 [889.6] 150 [667.2] 100 [444.8] 50 [222.4] [2668.9] [25.4] [50.8] [76.2] [101.6] [127.0] [152.4] [162.0] TOOLING LENGTH [] GRK75 26 LONG TRAVEL TOTAL GRIP FORCE lb [N] 500 [2224.1] 400 [1779.3] 300 [1334.5] 200 [889.6] 100 [444.8] [25.4] [50.8] [76.2] [101.6] [127.0] [152.4] [177.8][190.5] TOOLING LENGTH []
9 ENGINEERING DATA: SERIES GRK PARALLEL GRIPPERS 250 [1112.1] GRK SHORT TRAVEL On average 30% higher grip forces than previously cataloged! TOTAL GRIP FORCE lb [N] 200 [889.6] 150 [667.2] 100 [444.8] 50 [222.4] TOTAL GRIP FORCE lb [N] 450 [2001.7] 400 [1779.3] 350 [1556.9] 300 [1334.5] 250 [1112.1] 200 [889.6] 150 [667.2] 100 [444.8] 50 [222.4] 700 [3113.7] [12.7] [25.4] [38.1] [50.8] [63.5] [76.2] [88.9] [101.6] TOOLING LENGTH [] GRK46 8 SHORT TRAVEL [12.7] [25.4] [38.1] [50.8] [63.5] [76.2] [88.9] [101.6] [114.3] [127.0] TOOLING LENGTH [] GRK SHORT TRAVEL Sprg Open Sprg Close Open Close TOTAL GRIP FORCE lb [N] 600 [2668.9] 500 [2224.1] 400 [1779.3] 300 [1334.5] 200 [889.6] 100 [444.8] [25.4] [50.8] [76.2] [101.6] [127.0] [152.4] [162.0] TOOLING LENGTH [] 1200 [5337.8] GRK SHORT TRAVEL TOTAL GRIP FORCE lb [N] 1000 [4448.2] 800 [3558.6] 600 [2668.9] 400 [1779.3] 200 [889.6] [25.4] [50.8] [76.2] [101.6] [127.0] [152.4] [177.8][190.5] TOOLING LENGTH [] 9
10 OPTIONS: SERIES GRK PARALLEL GRIPPERS FSR2 FSE2 SPRING ASSIST CLOSE SPRING ASSIST OPEN sprg assist cap matas GRK mountg dimensions and manifold options sprg assist option has a mimal cap height adder reversible sprg assist cap simplifies manifold portg for creased mountg flexibility hardcoat alumum cap Imperial and metric configurations hardcoat alumum piston seals available Buna and Fluoro-elastomer compounds Series GRK available sprg assist close or open configurations (close shown) sprg assist provides 35% of grippg power of GRK at 87 psi [6 bar] Major Benefits The GRK sprg assist option provides all the benefits of the standard GRK with the followg additional benefits: Provides a mechanical method to reta part case of pressure loss. Increases grippg force. Provide sgle actg grippg actuation. 10
11 OPTIONS: SERIES GRK PARALLEL GRIPPERS The sprg assist option matas a mimum grippg force if air pressure is reduced or lost. The FSR2 option acts as a closg force, and the FSE2 option acts as an openg force. The sprg assist option also provides sgle actg actuation of the gripper and creases grip force a specific direction when used with air pressure. Workg pressure for sprg assist units is 66 psi m. to 90 psi max. [4.6 bar m. to 6.2 bar max.]. For sprg grip forces, see table on page 6. WARNING: Do not remove sprg housg mountg screws. 3 K5 4 2 K4 2X K [H7] DOWEL PIN HOLE 1 K3 4X K1 THD B2 5 B3 B6 B7 (SPRING ASSIST ADDER) J9 6 LETTER DIM B2 B3 B6 B7 J9 K1 K3 K4 K5 K7 GRK-x-35 X 6.5 or x x.197 DP M5 x 0.8 x 10.0 DP x 5.0 DP MODEL NUMBER GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or M6 x 1.0 x 12.7 DP 5/16-18 x.630 DP M8 x 1.25 x 16.0 DP 5/16-18 x.630 DP x 5.0 DP.2509 x.25 DP 6.0 x 6.3 DP.2509 x.250 DP /4-20 x.500 DP x.197 DP NOTES: 1) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED 2) METRIC INFORMATION SHOWN IN [ ] 3) CIRCLED NUMBERS INDICATE POSITIONS M8 x 1.25 x 16.0 DP x 6.3 DP 11
12 OPTIONS: SERIES GRK PARALLEL GRIPPERS L11-UB99 MANIFOLD PORTS With this option the gripper is configured for manifold mountg on the dicated mountg face. The standard ports are plugged. O-rg seals are provided for mountg between the gripper and the manifold. MANIFOLD OPTION FSR2-L11-UB99 FSE2-L11-UB99 MANIFOLD OPTION L11-UB99 2X PORT PLUG P10 METRIC SIZE 58 & 75 ONLY 63 SERIES GRK GRIPPER P7 CUSTOMER MOUNTING SURFACE P8 P6 (B1) P5 1 C L 2X PORT PLUG HEIGHT P11 METRIC SIZE 58 & 75 ONLY O-RING P9 MANIFOLD PORTING DIMENSIONS For customer use (dimensions required on customer mountg surface) 2 C L 4 3 P4 (B3) REPLACEMENT MANIFOLD SEAL KITS SIZE KIT NUMBER Kit cludes O-rgs LETTER DIM P4 P5 P6 P7 P8 P9 O-RING* P10 P11 (B1) (B3) GRK-x-35 X 6.5 or x GRK-x-46 X 8 or x MODEL NUMBER GRK-x-58 X 10.5 or x NOTES: 1) DESIGNATED C L IS CENTERLINE OF UNIT 2) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED 3) CIRCLED NUMBERS INDICATE POSITIONS 4) *I.D. x CROSS-SECTION GRK-x-75 X 12.5 or x
13 OPTIONS: SERIES GRK PARALLEL GRIPPERS CB1 CB2 8 THREADED INDUCTIVE PROXIMITY SWITCH READY WITH ONE SWITCH MOUNTING BRACKET 8 THREADED INDUCTIVE PROXIMITY SWITCH READY WITH TWO SWITCH MOUNTING BRACKETS With this option the gripper cludes a target extendg from the front of the gripper along with one or two 8 threaded ductive proximity switch mountg brackets. NOTE: Inductive proximity switches are shown for reference only. Switches are not cluded with this option. See Series switches on page THREADED PROXIMITY SWITCHES NOT INCLUDED PS7 HEX SIZE (BRACKET ADJUSTMENT) 5 PS6 HEX SIZE (PROX CLAMP) CB2 SHOWN PS1 PS2 MAX SENSING DISTANCE 6 (B1) PS4 PS8 1 C L SWITCHES PURCHASED SEPARATELY FROM -CB1 OR -CB2 TARGET & BRACKETS PS5 PS3 4 C L 2 3 LETTER DIM PS1 PS2 PS3 PS4 PS5 PS6 PS7 PS8 (B1) GRK-x-35 X 6.5 or 12 8 THREADED MODEL NUMBER GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or 26 8 THREADED 8 THREADED 8 THREADED NOTES: 1) DESIGNATED C L IS CENTERLINE OF UNIT 2) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED 3) CIRCLED NUMBERS INDICATE POSITIONS 13
14 OPTIONS & ACCESSORIES: SERIES GRK GRIPPERS V1 FLUORO-ELASTOMER & PTFE SEALS & GASKETS Fluoro-elastomer seals and PTFE gasket and plugs are available to achieve seal compatibility with certa fluids. Seal compatibility should be checked with the fluid manufacturer for proper application. SERIES THREADED INDUCTIVE PROXIMITY SWITCH This switch provides high reliability by the use of solid state sensg technology. The Series switch is suitable for plant environments where dirt and contamation create difficulties for electromechanical and other types of switches. Includes LED dicator for convenient means of positiong. 8 THREADED INDUCTIVE PROXIMITY SWITCHES SWITCH DESCRIPTION 8 Threaded Inductive Proximity Switch NPN (Sk) VDC, 2 meter cable 8 Threaded Inductive Proximity Switch PNP (Source) VDC, 2 meter cable See Switch and Sensors section PHD s ma catalog for complete switch specifications. USING SERIES JC1ST TEACHABLE SWITCHES WITH SERIES GRK The switches perform best when grippg part(s) the Optimal Part Detection Range which is the middle area of the jaw travel. As the position to be sensed moves nearer to either end of jaw travel (area B ) the switchg pot accuracy will decrease. Once the first position is taught, the jaws must travel a mimum distance before the second position can be taught. This mimum distance equals the Mimum Difference Part Size that can be detected based on total jaw travel. See Travel Distance Chart for these distances as it pertas to the model of GRK gripper you will be usg. NOTE: Mimum Difference Part Size can fall anywhere with the Optimal Part Detection Range. When one taught position is full open or full closed, then each jaw must travel B distance before the next pot can be taught. Use this data applyg the Series JC1ST Teachable Switches your specific application. In the event that the positions you need to sense are less than Mimum Difference Part Size, you may need to utilize a JC1ST Teachable and the JC1SD switch combation to achieve your requirements. The JC1ST Teachable and the JC1SD Switches can be used combations for more than two sensg outputs. SIZE SIZE MINIMUM DIFFERENCE IN PART SIZE ch MINIMUM DIFFERENCE IN PART SIZE TRAVEL DISTANCE CHART GRK SHORT TRAVEL ch B ch GRK LONG TRAVEL B ch TOTAL JAW TRAVEL ch TOTAL JAW TRAVEL ch OPTIMAL PART DETECTION RANGE ch OPTIMAL PART DETECTION RANGE ch Part 1 Part 2 Part 2 Part 1 = Mimum Difference Part Size NOTE: The distances the illustration are exaggerated for visual demonstration. OPEN B Taught Position 1 Taught Position 2 CLOSED CLOSED OPEN B B B Optimal Part Detection Range Mimum Difference Part Size Total Jaw Travel 14
15 ACCESSORIES: SERIES GRK GRIPPERS SERIES JC1ST TWO POSITION TEACHABLE MAGNETIC SWITCH This switch provides the ability to identify two separately prograable jaw positions with a sgle switch. Prograable capability means no fe-tung. With switch properly aligned, just place jaws desired position and program. Solid-state sensg technology provides a highly reliable switch. Elliptical housg allows for easy drop- stallation. Includes LED dicators for convenient means of positiong and prograg. Available with cable or 8 threaded Quick Connect. JC1STP-2 JC1STP-K SWITCH DESCRIPTION PNP (Source), Solid State, VDC, 2 meter cable PNP (Source), Solid State, VDC, Quick Connect MATCHING CORDSET DESCRIPTION M8, 4 p, Straight Female Connector, 5 meter cable SPECIFICATIONS OPERATING PRINCIPLE INPUT VOLTAGE NUMBER & TYPE OF OUTPUTS OUTPUT CURRENT VOLTAGE DROP SWITCH BURDEN ENVIRONMENTAL OPERATING TEMP. TYPICAL DETECTION AREA JC1STP-x Prograable Magnetic Field Characterization VDC Two PNP (source), separately adjustable 100 ma max., Short Circuit Protection 2.2 VDC 15 ma IP67-20C to 75C 0-50 ALIGN SYMBOL ON SWITCH AND BODY FOR OPTIMUM PERFORMANCE HEX WRENCH SUPPLIED WITH SENSOR JC1STP [3.8] DETECTION AREA [95.25] ONE SWITCH FOR 2 POSITION SENSING, ADDITIONAL SWITCH MAY BE USED FOR SENSING UP TO 4 POSITIONS (APPLICATION DEPENDENT).020 [0.5].768 [19.5].113 [2.87] [30].177 [4.5].256 [6.5] JC1STP-K (Quick Connect) FOR SWITCH DIMENSIONS SEE ABOVE [485.78] FOR TEACH MODULE DIMENSIONS SEE ABOVE [34.3] M8 x CORDSET PIN 4 WIRE COLOR BLACK PIN 3 WIRE COLOR BLUE PIN 2 WIRE COLOR WHITE PIN 1 WIRE COLOR BROWN.394 [10] M8 x [30.5] 15
16 ACCESSORIES: SERIES GRK GRIPPERS SERIES JC1SD MAGNETIC SWITCH This switch provides the ability to identify a sgle jaw position. Solid-state sensg technology provides a highly reliable switch. Elliptical housg allows for easy drop- stallation. Includes LED dicator for convenient means of positiong. Available with PNP or NPN output. Available with cable or 8 threaded Quick Connect. JC1SDP-5 JC1SDP-K JC1SDN-5 JC1SDN-K SWITCH DESCRIPTION PNP (Source), Solid State, VDC, 5 meter cable PNP (Source), Solid State, VDC, Quick Connect NPN (Sk), Solid State, VDC, 5 meter cable NPN (Sk), Solid State, VDC, Quick Connect MATCHING CORDSET DESCRIPTION M8, 3 p, Straight Female Connector, 2 meter cable M8, 3 p, Straight Female Connector, 5 meter cable SPECIFICATIONS JC1SDP-x JC1SDN-x OPERATING PRINCIPLE Solid State Detection of Movg Magnet INPUT VOLTAGE VDC OUTPUT TYPE PNP (source) NPN (sk) OUTPUT CURRENT 100 ma max., Short Circuit Protection VOLTAGE DROP 2.5 VDC SWITCH BURDEN 8 ma ENVIRONMENTAL IP67 OPERATING TEMP. -25C to 75C HS3 SWITCH ON OPEN 7.0 [18.0] HS1 (SIZE 35 & 46) (SIZE 58 & 75- SWITCH HOUSING DOES NOT PROTRUDE BELOW SURFACE OF GRIPPER) JC1SDx [3.6].984 [25] LETTER DIM HS1 HS3 GRK-x-35 X 6.5 or MODEL NUMBER GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or [2.8] [5 m] MIN JC1SDx-K (Quick Connect) xx CORDSET.140 [3.6].984 [25] M8 x 1 PIN 2/4 WIRE COLOR BLACK PIN 1 WIRE COLOR BROWN.111 [2.8] MIN [234.0] [34.3].402 [10.2] PIN 3 WIRE COLOR BLUE.689 [19.3] [34.8] PHD, Inc Clubridge Drive P.O. Box 9070, Fort Wayne, Indiana U.S.A. Phone (260) Fax (260) phdfo@phdc.com PHDEurope GmbH Arnold-Soerfeld-Rg Baesweiler, Germany Tel. +49 (0) Fax +49 (0) fo@phdeurope.de M-I 1/
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationLOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationGRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
More informationPARALLEL PNEUMATIC 3-JAW GRIPPER
PARALLEL PNEUMATIC 3-JAW GRIPPER Major Benefits 3 jaw design provides self-centerg and maximum contact between part and jaw toolg Low profile to grip force and jaw travel ratios Eight sizes available both
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More informationGRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION
GRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION A Wide Range of Sizes, Jaw Styles, Jaw Travels, and Grippg Forces for Most Any Grippg Requirement INDEX: Parallel Jaw Motion Pages -1 to -19 18 Angular
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationHEAVY LIFTERS FOR MATERIAL HANDLING
HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationINFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationSERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO.
Ordering Data SERIES SFP SLIDES INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationIdeal for part clamping in weld areas
PIN LOCATING CLAMPS FOR THE AUTOMOBILE INDUSTRY Series PLK Ideal for part clamping in weld areas Completely enclosed finger/pin prevents weld slag from entering Locking mechanism holds panel in place if
More informationParallel Grippers. Features. Operation. Contents. Mounting
Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals
More informationSERIES PNC CLAMP. Automated Stamping for Part Identification HEAVY DUTY MODEL PATENT #6,125,684 PNC05. Switch Mounting Options.
SERIES PNC CLAMP Automated Stampg for Part Identification HEAVY DUTY MODEL Tandem Cylder Switch Mountg Options Weldg Slag Shields PATENT #,5,8 Copyright 00, by PHD Inc. All Rights Reserved. Prted the U.S.A.
More informationFOR PART CLAMPING IN WELD AREAS
PLk SERIES PLK PIN LOCATING CLAMP for the Automotive Industry IDEAL FOR PART CLAMPING IN WELD AREAS Enclosed Finger Weld Field Immune Switches PLK01 A ORDERING DATA: SERIES PLK CLAMPS INDEX: Ordering Data
More informationSERIES GRS GRIPPERS INFORMATION SHEET
Ordering Data SERIES GRS GRIPPERS IFORMATIO SHEET IMPORTAT IFORMATIO DO OT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationSERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET
SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationGRM SERIES GRM CLAMPS R JAW STYLE. Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps GRMR01
GRM SERIES GRM CLAMPS R STYLE Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps ORDERING DATA: SERIES GRM CLAMP STYLE R INDEX: Ordering Data Page 2
More informationSeamless Integration of PHD Grippers to Universal Robots
Seamless Integration of PH Grippers to Universal Robots PNEUON02 ENEFITS n Provides seamless, cost-effective, pneumatic end-effector integration for collaborative robots n Incorporated M valves n ouples
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationPSP SERIES PSP SHOT PIN. Superior part locating and positioning. Provides the best repeatability in its class. Patent Pending PSP01A
PSP SERIES PSP SHOT PIN Superior part locating and positioning. Provides the best repeatability in its class. Port Fittings Option Switch Options Weld Cover Option Patent Pending ORDERING DATA: SERIES
More informationPARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
More informationSeries OCG Pneumatic Cylinders
The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN
More informationARM OVER CLAMP FOR ASSEMBLY AND WELDING
ARM OVER CLAMP FOR ASSEMBLY AND WELDING Superior part holding Provides widest range of high clamping force in its class OPTIONS: AD001 AU001 AL001 AR000 SW42 PS1E1 Patent Pending ORDERING DATA: SERIES
More informationPLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS
PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS Ideal for part clamping in weld areas Disappearing Pin Weld Field Immune Switch PLK03 PLK/PLKD PIN LOCATING CLAMPS PATENT PENDING Major Benefits Completely
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationLinear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
More informationHelical Hydraulic Rotary Actuators. we carry the load.
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationINFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES
INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationrotary parallel pneumatic gripper
rotary parallel pneumatic gripper Major Benefits High grip force to weight ratio Two body and jaw styles with a total of four sizes available both imperial and metric versions Sprg assist on open or close
More informationWG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
More informationAngular Motion Gripper Product Overview
2. 1 Angular Motion Gripper Product Overview RUA Series Angular Gripper 2-Jaw Angular Gripper Spring Assist Pneumatic or Hydraulic Operation Preferred Market: l Global Page2.2 DCT/CT Series TM 18 Angular
More informationBenefits and Selection Table
105 Benefits and Selection Table D-M-E s Internal Latch Lock Allows Precision Control of Mold Plate Latchg Operation D-M-E s unique ternally-mounted latch lock mechanism adapts a number of mold base sizes
More informationWBG Series Wide Body Grippers
WBG Series Wide Body Grippers www.numatics.com Table of Contents WBG Series Parallel Grippers Features and Benefits 3 How To Order 3 WBGS 60 Dimensions & Technical 4 WBGS 90 Dimensions & Technical 5 WBGL
More informationgrme SERIES GRME ELECTRIC CLAMP Electric Clamp with Greater Flexibility & Durability for the Automotive Industry GRME01A
grme SERIES GRME ELECTRIC CLAMP for the Automotive Industry Electric Clamp with Greater Flexibility & Durability GRME1A ORDERING DATA: SERIES GRME ELECTRIC CLAMPS INDEX: Ordering Data Pages 2 and 3 Benefits
More informationHelical Hydraulic Rotary Actuators
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
More informationgrippers pneumatic precision parallel movement DPP DirectConnect Series
grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded
More informationAngular and Parallel Grippers
CAP0551_Grippers_R2.qxp:OEM_TA 2/8/17 2:16 PM Page ii Angular and Parallel Grippers Table of Contents: Grippers Angular Grippers, Parallel Grippers and Options & Accessories Angular Grippers Introduction...
More informationSTRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines
PACKAGING COMPONENTS PLASTIC GROUP BCK STRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines Quality Delivery Support SOLUTIONS A division of PHD Simplified Pneumatic System Easy Maintenance Better
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationCOMPACT CYLINDER CYLINDER FORCE AND WEIGHT TABLE BASE WEIGHT EFFECTIVE AREA
CRS COMPACT CYLINDER STROKE TOLERANCE TEMPERATURE LIMITS VELOCITY LIFE EXPECTANCY SERIES CRS 1 psi min to 15 psi max at zero load [.7 bar min to 1 bar max] air.31 inch [.8 mm] -2 to +18 F [-28 to +82 C]
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationSaf-T-Gard Hydraulic Actuator MH 60 Series
Description Saf-T-Gard Hydraulic Actuator MH 60 Series for use with ", 4, 5 and 6" nomal gate valves The The Cameron MH Hydraulic Actuator product le has been developed by usg the superior features of
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationIn addition to the SPEC products described in this catalog,
In addition to the SPEC products described this catalog, Associated Sprg Raymond a worldwide leader the design, manufacture and sale of sprgs also offers a full le of struts, hardware, tool & die components:
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationSolutions for the Food Industry
Solutions for the Food Industry Bakeries, Dairies, Frozen Foods, Poultry, Meat Processing, Packaging, Bottle Blowing Long life replacement actuators to reduce downtime and increase productivity Packaging
More informationRotary Actuators DRG. See Page3.2 DRF. See. Page3.8 DRM
Rotary Actuators RR-18/28 Light Duty Rack and Pinion Rotary Actuator Series Designed for small or lightweight Low profile and bearing supported turn table provides an extremely compact package for tight
More informationRUA-112M. Description. Spring. Blank None. Spring Closed Spring Open RE RI Inductive Case Description
RUA Series Angular Grippers Features and Benefits How To Order Features: Robust, shielded, high force gripper Optional springs for part retention in case of air loss or increased grip-force Side or top
More informationParallel Grippers- Miniature Series
RPM SERIES 1.16 Parallel Grippers- Miniature Series Precision applications: Preloaded dual- V roller bearings eliminate side play for excellent part position repeatability. Miniature size: Compact design
More informationElectric Slide Solutions
Electric Slide Solutions Series ESU Electric Belt-Driven Base Slides Superior belt profile for improved performance Travels up to 5500 mm Speeds up to 5000 mm/s Exceptional moment and load capability Your
More informationInstallation, Operation and Maintenance Manual. for the MOGAS Pneumatic Actuator
Installation, Operation and Matenance Manual for the MOGAS Pneumatic Actuator Parts and Materials 18 21 20 22 23 24 25 19 1 2 3 4 5 6 26 27 19 7 8 9 15 16 17 22 20 21 18 14 10 25 24 11 12 13 2 Parts and
More informationPlastic Packaging Solutions
Plastic Packaging Solutions Injection Molding Stretch Blow Molding Extrusion Blow Molding Filling Packaging Increase Production Reduce Maintenance Reduce Downtime Reduce Scrap PPCIB12 Anywhere in the plant,
More information2-Jaw General Industrial Parallel Grippers Features and Benefits How To Order. Size Stroke - - -
RP Series 2-Jaw General Industrial Parallel Grippers Features and Benefits How o Order Features: Widely used robust sealed design gripper Double wedge design for high impact applications Hardened steel
More informationElectric Slide Solutions
Electric Slide Solutions Series ESCV Electric Thruster Slide Designed for vertical or non-rotating applications Built on the field proven Series SCV, the electric version offers many of the same benefits
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationVIKING HEAVY DUTY PUMPS
SERIES 495 STANDARD CONSTRUCTION Section 44 Page 44. Issue D FEATURES Range Temperature Range Viscosity Range 250 PSI (7 BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU ( cst to cst) 00
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationGripper Selection Guide
Gripper Selection Guide The Right Gripper for Your Part Robotic end effector solutions Angular & parallel, many sizes & options available For handling body panels & various sized parts Superior design
More informationProgram Center Distance Change
Introduction Program 60-146--Center Distance Change When the coefficient of thermal expansion of the material used for gears is different from the coefficient for the mountg or housg material, it is necessary
More informationlegris products are available from: Maryland Metrics
legris products are available from: Maryland Metrics 2003 2005 New Products atalog web: mdmetric.com email: sales@mdmetric.com push-to-connect fittgs 9000 safety coupler mi ball valves staless steel range
More informationAngular Grippers 2.1 ANGULAR GRIPPERS
ngular Grippers NGULR GRIPPERS 2.1 ngular Motion Gripper Product Overview NGULR GRIPPERS 2.2 RU Series ngular Gripper 2-Jaw ngular Gripper Spring ssist Pneumatic or Hydraulic Operation Preferred Market:
More informationRA (cam driven) Series
RA (cam driven) Series Angular Grippers Features and Benefits How o Order Features: Highly reliable rugged general purpose gripper High grip force to size ratio due to cam driven design Fingers can be
More informationCopyright 2017, by PHD, Inc. All Rights Reserved. Printed in the U.S.A.
The Right Gripper for Your Part GRIPPER SELECTION GUIDE - Robotic end effector solutions - Angular and parallel, many sizes and options available - For handling various sized parts - Superior design and
More informationProduct Information. Long-stroke gripper PHL 32
Product Information PHL 32 PHL Flexible. Precise. Powerful. PHL long-stroke gripper 2-finger parallel gripper with large jaw stroke for large parts and / or a broad range of parts Field of application
More informationUnique CORROSION RESISTANT PLASTIC SLIDE UNIT FEATURES. Major Benefits. Industry Uses
Unique CORROSION RESISTANT PLASTIC SLIDE Model# ML305733 PLASTIC SLIDE PET GRIPPERS UNIT FEATURES Bore Size: Stroke: Body: Tool Plate: Guide Shafts: Retaining Rings: Fasteners: 2X 32 mm DIA 2.000 +.080/-.000
More informationTuffCam Swing Clamps C-1. Frequently Asked Questions
Frequently Asked Questions C-1 When do you recommend the use of TuffCam Swing Clamps over the standard product? Applications where speed is essential, massive arms are required, or position sensing is
More informationAngular Grippers- 180 Series
D/ SERIES Angular Grippers- Series. angular gripper: he full jaw opening ( ) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. Multiple mounting locations:
More informationT 8075 EN Type 3591 Globe Valve ANSI version
T 8075 EN Type 3591 Globe Valve ANSI version Application Matenance-friendly cage valve for process engeerg applications with high dustrial requirements Valve size NPS 10 to 32 Pressure ratg to 900 Temperatures
More informationXRAY Grippers - Extreme Force and Torque. Patented Synchronous Technology - Extended Life
XRAY XRAY Grippers - Extreme Force and Torque The XRAY concept was developed for applications that impart high acceleration to heavy objects or require extremely long, precisely positioned jaws. These
More informationVISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
SERIES 493, 493 Section 34 Page 34. TBLE OF CONTENTS Features & Benefits...2 Specifications...2 Standard Materials of Construction...2 Key...3 Cutaway View & Pump Features...3 Mountg Options...4 Dimensions
More informationVIKING HEAVY DUTY PUMPS SERIES 4193 AND 493 STEEL EXTERNALS FEATURES
VIKING HEAVY DUTY PUMPS SERIES 49 AND 49 FEATURES Section 54 Page 54. Issue C Pressure Range 2 Temperature Range Viscosity Range 250 PSI ( BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU
More informationSizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module
More informationPILOT OPERATED SEQUENCE VALVE - Series VR4S
PILOT OPERTED SEQUENCE VLVE - Series VRS Veljan Sequence Valve Series VRS are pilot operated controls and enable a hydraulic system to operate a sequence. Fluid is allowed to pass to a secondary system
More informationENGINEERING DATA: SERIES STP SLIDES WITH RAIL BEARING
SRIS STP SLIS IFORMTIO SHT IMPORTT IFORMTIO O OT ISR! Use this formation sheet to assist with slide stallation and setup. File with matenance or mache documentation. PRT O.: 1-9 Orderg ata TO ORR SPIFY:
More information300 & 400 Series Positioning Tables
300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series
More informationPWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
More informationQuick-Fit Ducting Catalog
QF Quick-Fit Ductg Catalog Made the USA -53- 800-255-6213 QF Pipe Adjustable Nipple O-Rg Clamps Flanged Pipe 16ga & 18ga Pipe 16ga Nipple Assembly &18ga Nipple PART: 3200 Page 56 Angle Flange Adapter PART:
More informationOptimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationGC-45. Description. Seals. Viton High Temperature
DG/G Series 2-Jaw Precision Parallel Grippers Features and Benefits How o Order Features: Rugged, high precision long stroke gripper High impact resistant with double wedge design Versatile mounting on
More informationDiaphragm Accumulators
SBO Diaphragm Accumulators Description Diaphragm accumulators are a cost effective option for numerous functions volvg energy storage, shock absorption or pulsation dampeng a hydraulic or fluid system.
More informationRPL Series. Hard Coat Anodize The body has hard-coat anodize 60 RC with PTFE impregnation. One Piece Body One piece lightweight aluminum body
Parallel PNEUAI GRIPPERS PREISION OW PROFIE SERIES ONG FINGER APPIAIONS RP Series D-8-E--44 visit OEGA Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
More informationSINGLE ROD Pneumatic. Major Benefits
SINGL ROD Pneumatic SPMNT Major enefits Ideal for shot pin applications Shock pad options reduce noise and minimize end of stroke shock Imperial or metric versions available Simple construction for easy
More informationSERIES BCS STRETCH ROD CYLINDERS
BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH
More informationPARALLEL PNEUMATIC GRIPPERS
PARAE PNEUAI GRIPPERS PREISION OW PROFIE SERIES RP Series Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning lass 1 lean Room Rated with orrosion
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More informationP1X Series. Compact Rodless Air Cylinders Contents
Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...
More informationThe Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
More informationPPC PRODUCTS PARTS LISTS CATALOG 2013
PLASTIC PACKAGING COMPONENTS GROUP PPC PRODUCTS PARTS LISTS CATALOG 0 Quality Delivery Support SOLUTIONS A division of PHD PPCPARTS INDEX Page FACTORY REBUILD PROGRAM Using H Codes... Cylinders STRETCH
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationActuator Products. Actuator Products Air Cylinders Section B. Actuator Products. Catalog PDN1000-3US Parker Pneumatic
atalog PDN1-3US Air ylinders Section 1 Pictorial Index atalog PDN1-3US Tie Rod ylinders 3MA Series - Economy NFPA ylinder 6 ore sizes 1-1/2 through 5 inch 18 standard mounting styles Pressures up to PSIG
More information