PNEUMATIC 180 ANGULAR GRIPPER
|
|
- Jane Norton
- 6 years ago
- Views:
Transcription
1 PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece body minimizes jaw play Internal speed restriction removes the need for external speed controls in standard applications All units incorporate twin switch slots for flush switch mounting Two mounting surfaces Six sizes available 1-2 day shipping 5 million cycles minimum rated life hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external contamination close tolerance jaw slot and jaws provide precise positioning for tooling and minimal jaw play large hardened precision pivot and drive pins for reduced wear and increased ruggedness large hardened steel jaw driver is rugged and provides centering proximity switches for sensing large hardened precision pivot of jaw position (with -CU option) one-piece chrome plated steel piston rod for extended seal life hardcoated aluminum body with precision dowel holes provides minimal seal wear threads and dowel holes available on two surfaces for versatile and accurate mounting Series 6790 solid state and reed switches to sense location, switches mount flush internal shock pad absorbs impact and decreases noise levels long life piston and rod seals 4-113
2 ORDERING DATA: SERIES GRIPPERS TO ORDER SPECIFY: Product, Series, Type, Jaw Variation, Jaw, Design No., Bore Size, Total Jaw Rotation, and Options required. OPTIONS (OMIT IF NOT REQUIRED) PORTING OPTION UB15 - Port option in location 15 SWITCH OPTIONS SERIES R - Regular Duty JAW VARIATION 1 - Non-locking DESIGN NO. (See Note) 2 - Imperial 6 - Metric CU - Proximity switch ready for inductive proximity switches M -Magnet for Series 6790 & JC1 Switches STANDARD PORT IN LOCATION 48 OPTION: PORTS IN LOCATION 15 G R B x UB15-M PRODUCT G - Gripper TYPE B Angular 4 mm ROUND INDUCTIVE PROXIMITY SWITCHES PART NUMBER DESCRIPTION NPN (Sink) 2 meter cable PNP (Source) 2 meter cable JAW 1 - Style 1 BORE Diameter mm (in) (.472) 16 (.630) 20 (.787) 32 (1.260) 40 (1.575) 50 (1.969) TOTAL JAW ROTATION (DEGREES) 180 (Standard) NOTE: Design number indicates imperial or metric mounting holes, dowel pin holes, and ports. SERIES 6790 & JC1 SWITCHES PART NO. DESCRIPTION PNP (Source) or NPN (Sink) Reed, VDC, 5 m cable JC1SDN-5 NPN (Sink) Solid State, VDC, 5 m cable JC1SDP-5 PNP (Source) Solid State, VDC, 5 m cable PNP (Source) or NPN (Sink) Reed, VDC, JC1SDN-K NPN (Sink) Solid State, VDC, JC1SDP-K PNP (Source) Solid State, VDC, PNP (Source) or NPN (Sink) Reed, 65-0 VAC, NOTE: See Switches and Sensors section for additional switch information and complete specification. Switches must be ordered separately. SERIES 6790 & JC1SDx CORDSET CHART PART NO. DESCRIPTION M8, 3 pin, Straight Female Connector, 2 m cable M8, 3 pin, Straight Female Connector, 5 m cable PROXIMITY SWITCH MOUNTING KITS KIT NUMBER Each kit contains 1 target, 1 switch mounting bracket, and fasteners for mounting. Switches sold separately. 4 mm Round Inductive Proximity Switches PART NO DESCRIPTION NPN (Sink) 2 meter cable PNP (Source) 2 meter cable! Options may affect unit length. See dimensional pages and option information details. Refer to this product s online catalog in the product section for complete information including related dimensions and additional specifications. See link at bottom of this page CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at
3 ENGINEERING DATA: SERIES GRIPPERS SPECIFICATIONS OPERATING PRESSURE STANDARD UNIT OPERATING TEMPERATURE RATED LIFE CYCLE TIME LUBRICATION MAINTENANCE SERIES 30 psi min to 100 psi max [2 bar min to 7 bar max] air -20 to +F [-28 to +82 C] 5 million cycles minimum with standard seals See table below Factory lubricated for rated life Field repairable NOMINAL TOTAL JAW ROTATION GRIP FORCE FACTOR GF EXTERNAL GRIP INTERNAL GRIP IMPERIAL METRIC IMPERIAL METRIC GRIPPER WEIGHT lb kg CLOSE TIME 87 psi [6 bar] sec TIME 87 psi [6 bar] sec DISPLACEMENT in 3 cm FORCE MULTIPLIER GRAPH 1.0 FORCE MULTIPLIER INCLUDED JAW ANGLE AT POINT OF GRIP NOTES: 1) The force multiplier is a function of the jaw position at point of grip. 2) Force multiplier with the jaws parallel (0 ) is GRIP FORCE CALCULATION EQUATIONS: IMPERIAL: METRIC: PRESSURE (psi) x GF x FORCE MULTIPLIER = TOTAL GRIP FORCE (lb) DISTANCE FROM JAW PIVOT (in) PRESSURE [bar] x GF DISTANCE FROM JAW PIVOT [mm] x FORCE MULTIPLIER = TOTAL GRIP FORCE [N] For complete sizing information including jaw tooling and inertia, see online sizing guide or sizing catalog. JAW PIVOT TOOLING LENGTH Sizing & Application Assistance Use PHD's free online Product Sizing Application or view the Product Sizing Catalog at: F/2 PART F/2 F = Total Grip Force 4-115
4 DIMENSIONS: SERIES GRIPPERS SIze, 16, 20, & 32 PROXIMITY SENSOR MOUNTING LOCATION SLOTS FOR 1 SERIES 6790 SWITCHES K5 2X K X MANUFACTURING HOLES (CONSULT PHD FOR MORE INFORMATION) 4 K4 2 2X K6 THD C BORE & HOLE FOR K7 SHCS FROM OPPOSITE SIDE (J4) NOTES: 1) DESIGNATED IS CENTERLINE OF UNIT 2) METRIC INFORMATION SHOWN IN [ ] OR SHOWN IN COLUMNS DESIGNATED mm 3) CIRCLED NUMBERS INDICATE POSITIONS J1 B4 B2 3 5 K11 6 CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at B6 K10 J2 J3 K9 B5 J4 K3 J5 2X K1 THD 2X K X J7 THD J JAW PIVOT CENTERLINE B3 2X P1 PORT P5 LETTER DIM B1 B2 B3 B4 B5 B6 J1 J2 J3 J4 J5 J6 J7 J8 J9 J10 J11 J J13 K1 K2 K3 K4 K5 K6 K7 K8 K9 K10 K11 P1 P2 P3 P4 P5 J9 P4 & 16 J13 in x.296 DP.0947 x.187 DP x.400 DP # x.187 DP P2 P3 B1 J6 J10 J11 2X J7 THD 2X J JAW PIVOT CENTERLINE 2X MANUFACTURING HOLES (CONSULT PHD FOR MORE INFORMATION) P5 CLOSE 20 & 32 2X P1 PORT CLOSE mm in mm in mm in M4 x M4 x / M4 x /4-20 M6 x 1.0 5/16-18 x 7.5 DP x.300 DP x 7.6 DP x.375 DP x 9.5 DP x.551 DP 2.5 x.83 x 3.0 x.83 x 3.0 x.1908 x 4.75 DP.200 DP 5.0 DP.200 DP 5.0 DP.354 DP /4-20 x M6 x 1.0 1/4-20 x M6 x 1.0 5/16-18 x x 10.0 DP.500 DP x.7 DP.551 DP x 14.0 DP.630 DP M4 #10 M5 #10 M5 1/4 2.5 x.83 x 3.0 x.83 x 3.0 x.1908 x 4.75 DP.200 DP 5.0 DP.200 DP 5.0 DP.354 DP J9 P4 J13 P2 P3 B1 J6 J J11 J10 mm M6 x M8 x 1.25 x 14.0 DP 5.0 x 9.0 DP M8 x 1.25 x 16.0 DP M6 5.0 x 9.0 DP P
5 DIMENSIONS: SERIES GRIPPERS SIze 40 & 50 J1 J2 J3 J5 2X J7 THD 2X J J13 J6 J11 B5 J9 J J10 B6 JAW PIVOT CENTERLINE PROXIMITY SENSOR MOUNTING LOCATION J4 B3 2X P1 PORT 2X MANUFACTURING HOLES (CONSULT PHD FOR MORE INFORMATION) P5 P4 CLOSE SLOTS FOR SERIES 6790 SWITCHES 2X MANUFACTURING HOLES (CONSULT PHD FOR MORE INFORMATION) 2 2X K X K6 THD C BORE & HOLE FOR K7 SHCS FROM OPPOSITE SIDE (J4) B4 B2 5 K11 ANGULAR JAW ROTATION TOLERANCE (ALL S) 6 NOTES: 1) DESIGNATED IS CENTERLINE OF UNIT 2) METRIC INFORMATION SHOWN IN [ ] OR SHOWN IN COLUMNS DESIGNATED mm 3) CIRCLED NUMBERS INDICATE POSITIONS TOTAL JAW ROTATION (90 PER JAW) STANDARD /-0 CLOSED +15 /-0 K5 K K10 K4 K3 TOTAL JAW ROTATION 90 (45 PER JAW) /-0 4X K1 THD 4 K K9 2X K CLOSED +15 /-0 TOTAL JAW ROTATION 60 (30 PER JAW) 30 B1 P2 P3 +5 /-0 CLOSED LETTER DIM B1 B2 B3 B4 B5 B6 J1 J2 J3 J4 J5 J6 J7 J8 J9 J10 J11 J J13 K1 K2 K3 K4 K5 K6 K7 K8 K9 K10 K11 K K13 P1 P2 P3 P4 P5 in / /16-18 x.551 DP.2533 x.397 DP /8-16 x.787 DP 5/ x.397 DP mm in M8 x / M8 x /8-16 x x 14.0 DP.787 DP x 10.0 DP x.590 DP M10 x 1.5 1/2-13 x x 20.0 DP.984 DP M8 3/ x 10.0 DP x.590 DP P mm M10 x M10 x 1.5 x 20.0 DP 8.0 x 15.0 DP M x 1.75 x 25.0 DP M x 15.0 DP P /
6 OPTIONS & ACCESSORIES: SERIES GRIPPERS UB15 port option in location 15 M magnet for phd series 6790 & JC1 switches This option provides ports in Location 15. The standard ports are plugged. This option equips the unit with a magnetic piston for use with PHD s Series 6790 and JC1 Switches. The switches mount easily into two small grooves located on the front of the gripper body and are locked into place with a set screw. PHD s Series 6790 and JC1 Switches are required in addition to the -M option and are sold separately. SERIES 6790 & JC1 SWITCHES (NOT INCLUDED WITH -M OPTION) PORT OPTION -UB15 CU SENSOR READY With this option the gripper is assembled with extended jaw pivot pins for use with PHD inductive proximity switch mounting kits. Proximity switches and mounting kits are required in addition to the -CU option and are sold separately. See page for switches and mounting kits. Series 6790 & JC1 SWITCHES (-M OPTION REQUIRED) See Switches and Sensors section for complete switch specifications. FLOW Controls This accessory may be used to control the jaw actuation speed of the gripper. By decreasing the jaw actuation speed, the tooling inertia may be increased. PROXIMITY SWITCHES (-CU OPTION REQUIRED) See Switches and Sensors section for complete switch specifications. GRIPPER IMPERIAL FLOW CONTROLS PORT TUBE OD NOTE: EACH KIT CONTAINS 1 FLOW CONTROL KIT NUMBER GRIPPER METRIC FLOW CONTROLS PORT TUBE OD NOTE: EACH KIT CONTAINS 1 FLOW CONTROL KIT NUMBER! Options may affect unit length. See dimensional pages and option information details. Refer to this product s online catalog in the product section for complete information including related dimensions and additional specifications. See link at bottom of this page
7 OPTIONS: SERIES GRIPPERS UB15 port option in location 15 This option provides ports in Location 15. The standard ports are plugged. 2X P6 PORT P9 P8 SEE NOTE P7 PORT OPTION -UB15 CLOSE LETTER DIM P6 P7 P8 P9 in mm in mm in mm in mm in mm in P P NOTE:.098 [2.5 mm] PORT PLUG HEAD FOR 32, 40, & 50 METRIC UNITS ONLY mm P M magnet for phd series 6790 & JC1 switches This option equips the unit with a magnetic piston for use with PHD s Series 6790 and JC1 Switches. The switches mount easily into two small grooves located on the front of the gripper body and are locked into place with a set screw. PHD s Series 6790 and JC1 Switches are required in addition to the -M option and are sold separately. See accessories page for switch information. SERIES 6790 & JC1 SWITCHES (NOT INCLUDED WITH -M OPTION)
8 OPTIONS: SERIES GRIPPERS CU SENSOR READY With this option the gripper is assembled with extended jaw pivot pins for use with PHD inductive proximity switch mounting kits. Proximity switches and mounting kits are required in addition to the -CU option and are sold separately. See next page for switches and mounting kits. PS2 PS3 Ø PS1.275 x.015 DP [7.0 x 0.4 DP] 2X M2.5 x.45 THREAD x 4mm DP (J4) PS4 LETTER DIM Ø PS1 PS2 PS3 PS4 (J4) in mm in mm in mm in mm in mm in mm
9 ACCESSORIES: SERIES GRIPPERS PROXIMITY SWITCHES (-CU OPTION REQUIRED) See Switches and Sensors section for complete switch specifications..354 [9.0] MAX 4 mm Round Inductive Proximity Switches PART NO DESCRIPTION NPN (Sink) 2 meter cable PNP (Source) 2 meter cable PROXIMITY SWITCH MOUNTING KITS KIT NUMBER Each kit contains 1 target, 1 switch mounting bracket, and fasteners for mounting. Switches sold separately. 2.0] HEX 1 [0.8] MAX G DISTANCE PS7.315 [8.0] RAD 2.0] HEX 4 mm ROUND PROXIMITY SWITCH R in mm in mm in mm in mm in mm in mm
10 ACCESSORIES: SERIES GRIPPERS Series 6790 & JC1 SWITCHES (-M OPTION REQUIRED) See Switches and Sensors section for complete switch specifications. SERIES 6790 & JC1SDx CORDSET CHART PART NO. DESCRIPTION M8, 3 pin, Straight Female Connector, 2 m cable M8, 3 pin, Straight Female Connector, 5 m cable TORQUE CHART SWITCH TORQUE in-oz Hand tighten clockwise until JC1SDx switch is securely retained. Do not overtighten., 16, & 20 SERIES 6790 & JC1 SWITCHES PART NO. DESCRIPTION PNP (Source) or NPN (Sink) Reed, VDC, 5 m cable JC1SDN-5 NPN (Sink) Solid State, VDC, 5 m cable JC1SDP-5 PNP (Source) Solid State, VDC, 5 m cable PNP (Source) or NPN (Sink) Reed, VDC, JC1SDN-K NPN (Sink) Solid State, VDC, JC1SDP-K PNP (Source) Solid State, VDC, PNP (Source) or NPN (Sink) Reed, 65-0 VAC, NOTE: See Switches and Sensors section for additional switch information and complete specification. 32, 40, & 50 SWITCH MOUNTING SCREW SWITCH MOUNTING SCREW HS1* (, 16 & 20) APPROXIMATE LED LOCATION APPROXIMATE LED LOCATION LETTER DIM HS1* in mm in mm in mm in mm in mm in NOTE: * INDICATES END OF SERIES 6790 & JC1 SWITCH HOUSING, DOES NOT INCLUDE CABLE. mm SWITCH MOUNTING SCREW FLOW Controls This accessory may be used to control the jaw actuation speed of the gripper. By decreasing the jaw actuation speed, the tooling inertia may be increased. APPROXIMATE LED LOCATION GRIPPER IMPERIAL FLOW CONTROLS PORT TUBE OD NOTE: EACH KIT CONTAINS 1 FLOW CONTROL KIT NUMBER GRIPPER METRIC FLOW CONTROLS PORT TUBE OD NOTE: EACH KIT CONTAINS 1 FLOW CONTROL KIT NUMBER
GRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationLOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationGRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
More informationINFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES
INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationPARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationPARALLEL PNEUMATIC 3-JAW GRIPPER
PARALLEL PNEUMATIC 3-JAW GRIPPER Major Benefits 3 jaw design provides self-centerg and maximum contact between part and jaw toolg Low profile to grip force and jaw travel ratios Eight sizes available both
More informationSERIES GRS GRIPPERS INFORMATION SHEET
Ordering Data SERIES GRS GRIPPERS IFORMATIO SHEET IMPORTAT IFORMATIO DO OT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationINFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationSERIES GRK PARALLEL GRIPPERS
GRK SERIES GRK PARALLEL GRIPPERS Ideal for Assembly and Robotics Highest Grip Force Its Class Precision Jaw Movement High Moments Highest Grip Force to Height Ratio Precision Jaw Movement Wear Compensatg
More informationPARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
More informationSERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO.
Ordering Data SERIES SFP SLIDES INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationGRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION
GRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION A Wide Range of Sizes, Jaw Styles, Jaw Travels, and Grippg Forces for Most Any Grippg Requirement INDEX: Parallel Jaw Motion Pages -1 to -19 18 Angular
More informationOptimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationThe Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
More informationPNEUMATIC ROTARY ACTUATORS
Bulletin FRA.C-09 Prices effective September 1, 2011 PNEUMATIC ROTARY ACTUATORS FRA & FRC Series FRA Series Features 1. Magnetic pistons are standard on all models. 2. Compact design saves space. 3. Rectangular
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationAngular Motion Gripper Product Overview
2. 1 Angular Motion Gripper Product Overview RUA Series Angular Gripper 2-Jaw Angular Gripper Spring Assist Pneumatic or Hydraulic Operation Preferred Market: l Global Page2.2 DCT/CT Series TM 18 Angular
More informationPSP SERIES PSP SHOT PIN. Superior part locating and positioning. Provides the best repeatability in its class. Patent Pending PSP01A
PSP SERIES PSP SHOT PIN Superior part locating and positioning. Provides the best repeatability in its class. Port Fittings Option Switch Options Weld Cover Option Patent Pending ORDERING DATA: SERIES
More informationPLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS
PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS Ideal for part clamping in weld areas Disappearing Pin Weld Field Immune Switch PLK03 PLK/PLKD PIN LOCATING CLAMPS PATENT PENDING Major Benefits Completely
More informationgrippers pneumatic precision parallel movement DPP DirectConnect Series
grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded
More informationParallel Grippers. Features. Operation. Contents. Mounting
Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationVERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
More informationCOMPACT CYLINDER CYLINDER FORCE AND WEIGHT TABLE BASE WEIGHT EFFECTIVE AREA
CRS COMPACT CYLINDER STROKE TOLERANCE TEMPERATURE LIMITS VELOCITY LIFE EXPECTANCY SERIES CRS 1 psi min to 15 psi max at zero load [.7 bar min to 1 bar max] air.31 inch [.8 mm] -2 to +18 F [-28 to +82 C]
More informationSeries OCQ Pneumatic Compact Cylinders
The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability
More informationLinear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationHEAVY LIFTERS FOR MATERIAL HANDLING
HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars
More informationARM OVER CLAMP FOR ASSEMBLY AND WELDING
ARM OVER CLAMP FOR ASSEMBLY AND WELDING Superior part holding Provides widest range of high clamping force in its class OPTIONS: AD001 AU001 AL001 AR000 SW42 PS1E1 Patent Pending ORDERING DATA: SERIES
More informationFDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)
Bulletin FDXS-09 Features 1. Magnetic piston is standard in all sizes. 2. Non-rotating design enables precision positioning. ng. 3. Compact design saves space. 4. Suitable for multi-axis assemblies and
More informationUnique CORROSION RESISTANT PLASTIC SLIDE UNIT FEATURES. Major Benefits. Industry Uses
Unique CORROSION RESISTANT PLASTIC SLIDE Model# ML305733 PLASTIC SLIDE PET GRIPPERS UNIT FEATURES Bore Size: Stroke: Body: Tool Plate: Guide Shafts: Retaining Rings: Fasteners: 2X 32 mm DIA 2.000 +.080/-.000
More informationAngular and Parallel Grippers
CAP0551_Grippers_R2.qxp:OEM_TA 2/8/17 2:16 PM Page ii Angular and Parallel Grippers Table of Contents: Grippers Angular Grippers, Parallel Grippers and Options & Accessories Angular Grippers Introduction...
More informationSINGLE ROD Pneumatic. Major Benefits
SINGL ROD Pneumatic SPMNT Major enefits Ideal for shot pin applications Shock pad options reduce noise and minimize end of stroke shock Imperial or metric versions available Simple construction for easy
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationRUA-112M. Description. Spring. Blank None. Spring Closed Spring Open RE RI Inductive Case Description
RUA Series Angular Grippers Features and Benefits How To Order Features: Robust, shielded, high force gripper Optional springs for part retention in case of air loss or increased grip-force Side or top
More informationSERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET
SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationElectric Slide Solutions
Electric Slide Solutions Series ESU Electric Belt-Driven Base Slides Superior belt profile for improved performance Travels up to 5500 mm Speeds up to 5000 mm/s Exceptional moment and load capability Your
More informationWBG Series Wide Body Grippers
WBG Series Wide Body Grippers www.numatics.com Table of Contents WBG Series Parallel Grippers Features and Benefits 3 How To Order 3 WBGS 60 Dimensions & Technical 4 WBGS 90 Dimensions & Technical 5 WBGL
More informationDouble Acting Spring Assist
1.144 RPS Spring Assist 2-Jaw Parallel Grippers Patented double wedge design: his gripper utilizes our patented double wedge design for actuation and synchronization. Fail safe operation: he force supplied
More informationCABLE-DRIVEN PNEUMATIC ROTARY ACTUATOR
R LE-RIVEN PNEUTI ROTRY TUTOR ajor enefits Exceptionally low profile for confined spaces Three bore sizes and two standard rotations, 90 and 180 Standard internal shock pad eliminates metal to metal contact,
More informationWG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
More informationAngular Grippers- 180 Series
D/ SERIES Angular Grippers- Series. angular gripper: he full jaw opening ( ) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. Multiple mounting locations:
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationSeamless Integration of PHD Grippers to Universal Robots
Seamless Integration of PH Grippers to Universal Robots PNEUON02 ENEFITS n Provides seamless, cost-effective, pneumatic end-effector integration for collaborative robots n Incorporated M valves n ouples
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More information300 & 400 Series Positioning Tables
300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationPNC NUMBER CRUNCHER Series PNC44 with non-spherical mounting bracket Series PNC55 with PS(R) option Series PNC66 PNC06
PNC NUMBER CRUNCHER Automated stamping for part identification Series PNC44 with non-spherical mounting bracket Series PNC55 with PS(R) option Series PNC06 PNC Automated stamping for part identification
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationFKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot
Catalog No. KHS- KHS Series Jaw Parallel Motion Pneumatic Grippers Mounting Hole Can be mounted from the gripper side Mounting slot for easy sensor installation Sensor Capable Bottom tapped holes Can be
More informationGrippers Parallel grippers
-finger parallel grippers -finger parallel grippers Product notes > Gripper with high gripping force > Double-acting for inside/outside gripping and short duty cycles > Single-acting: normally open (NO),
More informationAngular Grippers 2.1 ANGULAR GRIPPERS
ngular Grippers NGULR GRIPPERS 2.1 ngular Motion Gripper Product Overview NGULR GRIPPERS 2.2 RU Series ngular Gripper 2-Jaw ngular Gripper Spring ssist Pneumatic or Hydraulic Operation Preferred Market:
More informationAGE-XY. Application example. Compensation XY Compensation Units Light Loads. Workpiece weight 4 kg.. 10 kg. Sizes 050..
AGE-XY Sizes 050.. 080 Workpiece weight 4 kg.. 10 kg Compensation paths XY ± 2.5 mm.. ± 4 mm Rotation ± 12.. ± 16 Application example Insertion unit for assembling a pin in a bore, in an approximately
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationSizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module
More informationRA (cam driven) Series
RA (cam driven) Series Angular Grippers Features and Benefits How o Order Features: Highly reliable rugged general purpose gripper High grip force to size ratio due to cam driven design Fingers can be
More informationModular Gripping Products. Modular Gripping Products Introduction
Modular Gripping Products Introduction GR84 Enclosed Modular Mini-Clamp Offers several different jaw and tip options. Can be flange or cylinder mounted. High clamping force and fast opening and closing
More informationRotary Actuators DRG. See Page3.2 DRF. See. Page3.8 DRM
Rotary Actuators RR-18/28 Light Duty Rack and Pinion Rotary Actuator Series Designed for small or lightweight Low profile and bearing supported turn table provides an extremely compact package for tight
More informationProduct Information. Rotary gripping module with angular gripper RW
Product Information RW RW Flexible. Modular. Compact. Gripper Swivel Module RW Rotary gripper combination, consisting of a rotary module and a 2-finger angular gripper Field of application Gripping and
More informationElectric Slide Solutions
Electric Slide Solutions Series ESCV Electric Thruster Slide Designed for vertical or non-rotating applications Built on the field proven Series SCV, the electric version offers many of the same benefits
More informationRPL Series. Hard Coat Anodize The body has hard-coat anodize 60 RC with PTFE impregnation. One Piece Body One piece lightweight aluminum body
Parallel PNEUAI GRIPPERS PREISION OW PROFIE SERIES ONG FINGER APPIAIONS RP Series D-8-E--44 visit OEGA Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
More informationIdeal for part clamping in weld areas
PIN LOCATING CLAMPS FOR THE AUTOMOBILE INDUSTRY Series PLK Ideal for part clamping in weld areas Completely enclosed finger/pin prevents weld slag from entering Locking mechanism holds panel in place if
More informationRotary Actuators Actuators Three-Position Engineering Specifications/ Application Checklist 4.3-4.15 4.16-4.18 4.19-4.22 Rotary Actuators TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE QUALITY FEATURES
More informationMaintenance Instructions & Parts List
PM-PTR/LTR-C Automation Actuator Division Wadsworth, Ohio 448 October 7, 993 Rev. October 999 PTR/LTR Series Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When
More informationSeries OCG Pneumatic Cylinders
The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN
More informationAG Series Angular Grippers
AG Series Angular Grippers www.numatics.com Table of Contents AG Series Angular Grippers Features and Benefits 3 How to Order 4 Dimensions 5 Specifications and Load Ratings 6 Sensing Part Numbers 7 Quick
More informationWe shut the air supply down to our clamps once they are in position. Sometimes we notice that they are sticking. Could this be the cause?
Frequently Asked Questions B-1 Following are some of the questions we have been asked while developing the VektorAir TM line. Please read them carefully before planning your system. Many common problems
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationNOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove
NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationSERIES BCS STRETCH ROD CYLINDERS
BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH
More informationPARALLEL PNEUMATIC GRIPPERS
PARAE PNEUAI GRIPPERS PREISION OW PROFIE SERIES RP Series Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning lass 1 lean Room Rated with orrosion
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationSFL. Application example. Pneumatic Rotary Actuators Rotor. Weight kg. Axial force N. Sizes 25..
SFL Sizes 25.. 64 Weight 0.09.. 0.71 kg Torque 0.12 Nm.. 3.9 Nm Axial force 10.. 50 N Bending moment 0.1.. 0.5 Nm Application example Sorting unit with SFL rotor to drive the separator switch Rotor SFL
More informationHigh-Torque, Easy Speed & Stroke Control, Field Adaptable
D R I V I N G T H E I N D U S T R Y F O R W A R D High-Torque, Easy Speed & Stroke Control, Field Adaptable Fully Adjustable Stroke Length and Jaw Stop Positions Flow Controls Fitted as Standard Quick
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationLong stroke grippers HGPL
Sturdy Gripping forces of up to 754 N Reliable Space saving 2004/10 Subject to change Products 2004/2005 1 / 3 Key features At a glance Space saving and suitable for high forces Two parallel and opposing
More information2-Jaw General Industrial Parallel Grippers Features and Benefits How To Order. Size Stroke - - -
RP Series 2-Jaw General Industrial Parallel Grippers Features and Benefits How o Order Features: Widely used robust sealed design gripper Double wedge design for high impact applications Hardened steel
More informationBest Price, Best Design, Best Delivery
Best Price, Best Design, Best Delivery GRM Clamps GRM Clamps Greater clamping Forces, Flexibility, Durability, & low cost Electric Versions Available! Series GRME fixed or spherical mounting brackets for
More informationFOR PART CLAMPING IN WELD AREAS
PLk SERIES PLK PIN LOCATING CLAMP for the Automotive Industry IDEAL FOR PART CLAMPING IN WELD AREAS Enclosed Finger Weld Field Immune Switches PLK01 A ORDERING DATA: SERIES PLK CLAMPS INDEX: Ordering Data
More informationFeatures and Benefits
...........................................................3-14 Features and Benefits..............................................................................3 How To Order....................................................................................4
More informationKRONES DIRECT REPLACEMENTS
PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
More informationGRM SERIES GRM CLAMPS R JAW STYLE. Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps GRMR01
GRM SERIES GRM CLAMPS R STYLE Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps ORDERING DATA: SERIES GRM CLAMP STYLE R INDEX: Ordering Data Page 2
More informationTurn-Dex Rotary Vane Actuators
Turn-Dex Rotary Vane Actuators Turn-Dex: Table of Contents Turn-Dex Turn-Dex 1-1/4 Bore pg. 2 How to Order pg. Dimensional Data pg. 4 Turn-Dex 2-1/2 Bore pg. 5 How to Order pg. 6 Dimensional Data pg. 7
More informationCatalog FGYBR-11 NEW PRODUCT. Magnetically Coupled Rodless Cylinders. FGYB & FGYR Series
Catalog FGYBR- NEW PRODUCT Magnetically Coupled Rodless Cylinders FGYB & FGYR Series Series FGYB Basic cylinder mounting See pages 6 & for dimensions and ordering information. Series FGYR Through hole
More informationBimba Metric Flow Controls: FCPM Series M5 Port Mounted Flow Control Valves For M5 port, FCPM-1-Q4-L 4mm OD tubing 2mm ID tubing For M5 port, 4mm OD t
Bimba Metric Flow Controls: FCPM Series Specifications Fluid Maximum Operating Pressure Minimum Operating Pressure Temperature Range 3 Air 10 Bar (145 PSI) 0.1 Bar (1.5 PSI) -10º to +80ºC (-14º to +176ºF)
More informationThrough Hole Parallel Gripper PPC Series
ourtesy of MA/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 8 hrough Hole Parallel Gripper PP Series hrough Hole Gripper: Designed for unique applications
More informationPTR Series Pneumatic Rack & Pinion Rotary Actuator
zact14 Pneumatic Rack & Pinion Rotary Actuator Contents Features... 2 Specifications... 3 Dimensions... 4 Mounting Options... 5 Shaft Options... 6 Port Size and Location... 7 Cushions and Bumpers... 8
More information