Best Price, Best Design, Best Delivery

Transcription

1 Best Price, Best Design, Best Delivery

2 GRM Clamps GRM Clamps Greater clamping Forces, Flexibility, Durability, & low cost Electric Versions Available! Series GRME fixed or spherical mounting brackets for side or rear mounting field repairable in 10 minutes using metric hex wrenches adjustable hardened-steel impact plates eliminate damage to body from panel impact cam design locks clamp in the closed position ensuring part retention if air pressure is lost adjustable rotation stop allows for multiple jaw openings in one clamp interchangeable hardened-steel jaws minimize costly inventory and maximize wear resistance for long life self locking internal threads throughout eliminate need for thread locking adhesives or additional locking components wide and deep jaw throats accommodate difficult clamping applications Major Benefi ts Simple design, long life, high clamp force, and fast fi eld maintenance. Available in two sizes, 15 jaw styles, and 5 jaw openings to fi t a wide range of clamping applications. Compact envelope size and high clamp force. Series GRM size generates up to 5 lb [1000 N] of clamp force. The Series GRM size generates up to 500 lb [ N] of clamp force for maximum fl exibility and performance. Six modular designed jaw tips are offered for maximum clamping performance in a variety of applications. The jaws of the Series GRM Clamp lock in the closed position ensuring part retention if air pressure is lost due to line rupture or power loss. Standard Features Lowest cost of ownership Non-adjustable color coded tips Modular mounting brackets Adjustable jaw rotations Integral shock pads Large jaw throat depth Self-locking internal threads Imperial and metric mounting Fully fi eld repairable Catalog Index Jaw Styles... page GRM Clamps Ordering Data...pages & 5 Engineering Data...pages 6 & GRM Dimensions... pages 8 to 19 Tip Mounting & Dimensions... pages 0 to Mounting Thread & Bracket Dimensions... pages 5 to 8 Port Fittings Dimensions... page 9 GRM Accessories Section... pages 0 to 5 Refer to for parts breakdown and jaw rotation dimensions. Contact your local distributor for clamp unit pricing. Patents for GRM Clamps & Accessories International Patents ,,08 B1 5,91,51 6,55,51 B 6,61,189 B 6,,118 B 6,6, B1 6,55,916 B 6,0,6 B U.S. Patents 6,056,81 6,50,616 B1 6,08,01 6,,586 B1 6,16,5 B1 6,588,816 B1 6,98,08 B Copyright 008, by PHD, Inc. All Rights Reserved. Printed in the U.S.A.

3 GRM JAW STYLES JAW DESIGN BENEFITS INDUSTRY USES FORCE lb N JAW STYLE S Unit dimensions on page 8. Standard Accepts standard and custom tooling Sheet metal handling Automotive Assembly Molded carpet manufacturing General industrial automation GRM Clamps JAW STYLES C & D Unit dimensions on pages 9 & 10. Single Chisel Double Chisel Compact lower jaw Blank loading Sheet separation applications Sheet metal handling Automotive Assembly Molded carpet manufacturing General industrial automation JAW STYLES H & J Single Shovel Unit dimensions on page 11. Double Shovel Compact lower jaw Blank loading Sheet separation applications Sheet metal handling Automotive Assembly Molded carpet manufacturing General industrial automation JAW STYLES L & M Single Flat Shovel Double Flat Shovel Compact lower jaw No upper jaw swing through Limited space environments Material handling Assembly General industrial automation Unit dimensions on page 1. JAW STYLE F Unit dimensions on page 13. Flange Ideal for bends and folds Ability to reach over flanges Material handling when clamping on bends, folds, and flanges Assembly Packaging JAW STYLES N & P Needlenose Hammerhead Compact jaw design Blank loading Integral tips machined in jaws Blank loading Limited space environments Automotive Unit dimensions on page 1. JAW STYLE K Hook Short overall length Space savings between rails Limited space environments Automotive Assembly General industrial automation Unit dimensions on page 15. JAW STYLE G Toolable Accepts custom tooling Large jaw opening Fabrication shops Automotive Material handling General industrial automation Unit dimensions on page 16. JAW STYLE R Unit dimensions on page 19. Short Accepts standard and custom tooling Compact jaw design Limited space environments Material handling Assembly General industrial automation

4 ORDERING DATA: SERIES GRM clamps GRM Clamps TO ORDER SPECIFY: Model, Unit Size, Mounting, Jaw Style Option, Design No., Jaw Opening (A & B), Jaw Tip (A & B), and Additional if desired. UNIT - 3 mm Short - 0 mm Long JAW STYLE OPTION S - Standard Jaw C - Single Chisel Jaw D - Double Chisel Jaw F - Flange Jaw G - Toolable Jaw H - Single Shovel Jaw J - Double Shovel Jaw K - Hook Jaw L - Single Flat Shovel Jaw M - Double Flat Shovel Jaw N - Needlenose Jaw P - Hammerhead Jaw R - Short Jaw JAW OPENING Opening - -1/ Opening 5-5 Opening Opening 0-0 Opening 5-5 Opening Opening Opening Opening Opening Opening (See Note 1) JAW OPTIONS - BLANK - No Tip See charts on page 5 PORT FITTINGS BLANK - No Fitting LAA - 90 Swivel Elbow, Metal LBB - 90 Swivel Elbow, Plastic LCC - 90 Swivel Elbow, Metal CLOSE OPEN OPEN CLOSE GRMxx GRMxx GRM S S DCB - 75 DDB - LAA - ADD L OPTIONS MODEL JAW STYLE OPTION S, C & D SIDE REAR 0 MOUNTING T - Rear Mounting Threads (Standard) C - 90 Spherical Mounting Bracket R - Non-Spherical Mounting Bracket S - Spherical Mounting Bracket W- Oversize Spherical Mounting Bracket A - Rear Spherical Mounting Bracket B - Oversize Rear Spherical Mtg Bracket P - Rear Mounting Plate TES: 1) With the exception of jaw styles L and M, the 0 jaw rotates open slightly during the clamp cycle. The 0 jaw returns to 0 position as the opposing jaw reaches the fully open and fully closed position. ) Metric units have metric ports and mounting. Imperial units have imperial ports and mounting JAW STYLE OPTION H & J JAW ROTATION COMBINATIONS DESIGN. - Imperial 6 - Metric (See Note ) JAW STYLE OPTION G JAW OPENING Opening 0-0 Opening - -1/ Opening Opening 0-0 Opening 5-5 Opening Opening Opening Opening (See Note 1) JAW OPTIONS - BLANK - No Tip See charts on page 5 3) See charts for available jaw combinations. ) See the Accessories section for non-standard options. JAW STYLE OPTION G JAW STYLE OPTION L & M JAW STYLE OPTION N & P JAW STYLE OPTION K JAW STYLE OPTION F 0 JAW STYLE OPTION F JAW STYLE OPTION R

5 ORDERING DATA: SERIES GRM clamps JAW OPTIONS TES: 1) Cone point against cone point tip combinations are not allowed due to point overlap. ) Red tips are available only on GRM size. GRM Clamps JAW STYLES S, C, D, H, J, K, L, M JAW OPTIONS - Material Thickness 0 to 1.51 to 3.01 to.01 to 1.50 mm 3 mm mm 5 mm* Color Black Silver Gold Red Single Cone Point SCB SCS SCG SCR Double Cone Point DCB DCS DCG DCR Single Diamond Point SDB SDS SDG SDR Double Diamond Point DDB DDS DDG DDR Single Urethane Pad SUB SUB SUB SUB Double Urethane Pad DUB DUB DUB DUB JAW STYLE R JAW OPTIONS - Material Thickness 0 to 1.51 to 3.01 to 1.50 mm 3 mm mm Color Black Silver Red Single Cone Point SCB SCS SCR Double Cone Point DCB DCS DCR Single Diamond Point SDB SDS SDR Double Diamond Point DDB DDS DDR Single Urethane Pad SUB SUB SUB Double Urethane Pad DUB DUB DUB JAW OPTIONS - ** Material Thickness 0 to 1.51 to 3.01 to.01 to 1.50 mm 3 mm mm 5 mm* Color Black Silver Gold Red Single Cone Point SCB SCS SCG SCR Double Cone Point DCB DCS DCG DCR Single Diamond Point SDB SDS SDG SDR Double Diamond Point DDB DDS DDG DDR Single Urethane Pad SUB SUB SUB SUB Double Urethane Pad DUB DUB DUB DUB JAW OPTIONS - Material Thickness 0 to 1.51 to 3.01 to 1.50 mm 3 mm mm Color Black Silver Red Single Cone Point SCB SCS SCR Double Cone Point DCB DCS DCR Single Diamond Point SDB SDS SDR Double Diamond Point DDB DDS DDR Single Urethane Pad SUB SUB SUB Double Urethane Pad DUB DUB DUB *Material thickness for H, J, L, & M jaw styles =.01 to.5 mm **Jaw B tip options are not available for jaw styles C, D, H, J, L, & M JAW STYLE F JAW OPTIONS - Material Thickness 0 to.86 to 1.1 to 1.53 to 1.95 to.3 to.61 to 3.01 to.85 mm 1.0 mm 1.5 mm 1.9 mm.9 mm.6 mm 3.0 mm 3. mm Color Black Silver Gold Silver Gold Gold Red Red Single Cone Point SCB SCS SCG SCS SCG SCG SCR SCR Double Cone Point DCB DCS DCG DCS DCG DCG DCR DCR Single Diamond Point Pad SDB SDS SDG SDS SDG SDG SDR SDR Double Diamond Point Pad DDB DDS DDG DDS DDG DDG DDR DDR Single Urethane Pad SUB SUB SUB SUB SUB SUB SUB SUB Double Urethane Pad DUB DUB DUB DUB DUB DUB DUB DUB JAW OPTIONS - Material Thickness 0 to.86 to 1.1 to 1.53 to 1.95 to.3 to.61 to 3.01 to.85 mm 1.0 mm 1.5 mm 1.9 mm.9 mm.6 mm 3.0 mm 3. mm Color Black Black Black Silver Silver Gold Gold Red Single Cone Point SCB SCB SCB SCS SCS SCG SCG SCR Single Diamond Point Pad SDB SDB SDB SDS SDS SDG SDG SDR Double Diamond Point Pad DDB DDB DDB DDS DDS DDG DDG DDR Single Urethane Pad SUB SUB SUB SUB SUB SUB SUB SUB Double Urethane Pad DUB DUB DUB DUB DUB DUB DUB DUB 5

6 ENGINEERING DATA: SERIES GRM Clamps GRM Clamps SPECIFICATIONS UNIT WEIGHT* lb kg TOTAL FORCE at 87 psi [6 bar] lb N MODEL GRMxS-x GRMxS-x-5-5 GRMxS-x-- GRMxS-x GRMxS-x-5-00 GRMxS-x--00 GRMxC-x GRMxC-x-5-5 GRMxC-x-- GRMxC-x GRMxC-x-5-00 GRMxC-x--00 GRMxD-x GRMxD-x-5-5 GRMxD-x-- GRMxD-x GRMxD-x-5-00 GRMxD-x--00 GRMxH-x GRMxH-x-5-00 GRMxH-x--00 GRMxJ-x GRMxJ-x-5-00 GRMxJ-x--00 GRMTL-x GRMTL-x-5-00 GRMTL-x--00 GRMTM-x GRMTM-x-5-00 GRMTM-x--00 GRMxF-x GRMxF-x GRMxF-x-50- GRMxN-x GRMxN-x-5-5 GRMxN-x-- GRMxN-x GRMxN-x-5-00 GRMxN-x--00 GRMxP-x GRMxP-x-5-5 GRMxP-x-- GRMxP-x GRMxP-x-5-00 GRMxP-x--00 GRMxK-x-50-0 GRMxK-x-5-0 GRMxK-x GRMxG-x-0-0 GRMxG-x-- GRMxG-x *Weight is for basic clamp without mounting bracket or tips MAXIMUM EXTERNAL LOAD lb N MODEL GRMxS-x GRMxS-x-5-5 GRMxS-x-- GRMxS-x GRMxS-x-5-00 GRMxS-x--00 GRMxH-x GRMxH-x-5-00 GRMxH-x--00 GRMxJ-x GRMxJ-x-5-00 GRMxJ-x--00 GRMxF-x GRMxF-x GRMxG-x GRMxG-x-0-0 GRMxG-x-- GRMxG-x GRMxG-x-0-00 SPECIFICATIONS UNIT WEIGHT* lb kg TOTAL FORCE at 87 psi [6 bar] lb N *Weight is for basic clamp without mounting bracket or tips MODEL GRM GRM SPECIFICATIONS (continued) UNIT WEIGHT* lb kg DISPLACEMENT OPEN OR CLOSE in 3 cm TOTAL FORCE at 87 psi [6 bar] lb N MODEL GRMxR-x GRMxR-x-5-5 GRMxR-x GRMxR-x-- GRMxR-x GRMxR-x-5-00 GRMxR-x *Weight is for basic clamp without mounting bracket or tips SPECIFICATIONS WORKING PRESSURE BODY JAWS SEALS LUBRICATION TEMPERATURE LIMITS MAXIMUM EXTERNAL LOAD lb N MAXIMUM EXTERNAL LOAD lb N FOR ALL GRM JAW STYLES 30 psi min psi max. [ bar min. - 7 bar max.] Hardcoat Aluminum Hardened Steel Bidirectional Piston Seal Lip Type Rod Seal Permanent for Non-Lube Air -0 to 180 F [-30 to 8 C] 6

7 ENGINEERING DATA: SERIES GRM Clamps GRM Clamps MTG. CODE C R S W A B P T MOUNTING OPTIONS DESCRIPTION 90 Spherical Mounting Bracket Non-Spherical Mounting Bracket Spherical Mounting Bracket Oversize Spherical Mounting Bracket Rear Spherical Mounting Bracket Oversize Rear Spherical Mounting Bracket Rear Mounting Plate Rear Mounting Thread (Standard) WEIGHT ADDER lb kg lb kg MODEL SCx SDx DCx DDx SUB DUB OPTIONS WEIGHT lb kg lb kg For additional mounting, jaw, switch, and tip options, see the Series GRM Clamp Accessories section.

8 DIMENSIONS: STANDARD JAW STYLE S - S & Standard Jaw GRMxS-x-xxxxx-xxxxx GRMxS-x-xxxxx-xxxxx B B1 P3 F B3 P X 1/8 NPT [1/8 BSP] PORT F5 B JAW PIVOT J7 J8 J J3 X M8 x 1.5 THREAD (THRU BOTH JAWS) J J5 T1 F1 (ADJUSTABLE) J1 J1 (OPEN MAX) J16 (PARALLEL) F3 LETTER DIM B1 B B3 B F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J7 J8 J16 (PARALLEL) P P3 T1** MODEL NUMBER GRMxS GRMxS in mm in mm * TOLERANCE FOR J3 & J =.003 [.076] ** T1 IS THE LARGEST AVAILABLE. TE: SEE DIMENSION AND MOUNTING BRACKET PAGES. PORT LOCATION GRMxx UNITS ONLY P P3 X 1/8 NPT [1/8 BSP] PORT GRMxS-x-xxxxx-00xxx GRMxS-x-xxxxx-00xxx S MAX B1 P3 B B3 J15 (OPEN) F P F3 F5 B JAW PIVOT J6 X 1/8 NPT [1/8 BSP] PORT J7 J J3 X M8 x 1.5 THREAD (THRU BOTH JAWS) J J5 T1 J8 F1 (ADJUSTABLE) J16 (PARALLEL) J1 J1 (OPEN MAX) LETTER DIM B1 B B3 B F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J15 (OPEN) J16 (PARALLEL) P P3 S*** T1** MODEL NUMBER GRMxS GRMxS in mm in mm * TOLERANCE FOR J3 & J =.003 [.076] ** T1 IS THE LARGEST AVAILABLE. ***S DIMENSION OCCURS ON -00 ONLY. P P3 PORT LOCATION GRMxx UNITS ONLY X 1/8 NPT [1/8 BSP] PORT TES: 1) SEE DIMENSION AND MOUNTING BRACKET PAGES. ) THE 0 JAW ROTATES 3 DURING THE CYCLE, OPENING THE END OF THE JAW.079 [.0]. THE JAW RETURNS TO THE 0 POSITION AS THE OPPOSING JAW REACHES FULL OPEN OR CLOSED. 8 All dimensions are reference only unless specifically toleranced.

9 DIMENSIONS: SINGLE CHISEL JAW STYLE C - GRMxC-x-xxxxx-xx B B1 P3 F B3 P F5 J6 F3 X 1/8 NPT [1/8 BSP] PORT JAW PIVOT B J7 J J9 () J3 J8 M8 x 1.5 THREAD THRU ( ONLY) J J5 J16 (PARALLEL) T1 F1 (ADJUSTABLE) J1 J1 (OPEN MAX) LETTER DIM B1 B B3 B F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J9 J16 (PARALLEL) P P3 T1** MODEL NUMBER GRMxC in mm * TOLERANCE FOR J3 & J =.003 [.076] ( ONLY) ** T1 IS THE LARGEST AVAILABLE. TE: SEE DIMENSION AND MOUNTING BRACKET PAGES. Chisel Jaw GRMxC-x-xxxxx-00 S MAX B1 P3 B J15 (OPEN) F B3 P F5 J6 JAW PIVOT F3 B X 1/8 NPT [1/8 BSP] PORT J7 J J3 J8 M8 x 1.5 THREAD THRU ( ONLY) J9 () J J5 T1 F1 (ADJUSTABLE) J16 (PARALLEL) J1 (OPEN MAX) J1 LETTER DIM B1 B B3 B F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J9 J15 (OPEN) J16 (PARALLEL) P P3 S*** T1** MODEL NUMBER GRMxC in mm * TOLERANCE FOR J3 & J =.003 [.076] ( ONLY) ** T1 IS THE LARGEST AVAILABLE. ***S DIMENSION OCCURS ON -00 ONLY. TES: 1) SEE DIMENSION AND MOUNTING BRACKET PAGES. ) THE 0 JAW ROTATES 3 DURING THE CYCLE, OPENING THE END OF THE JAW.079 [.0]. THE JAW RETURNS TO THE 0 POSITION AS THE OPPOSING JAW REACHES FULL OPEN OR CLOSED. All dimensions are reference only unless specifically toleranced. 9

10 DIMENSIONS: DOUBLE CHISEL JAW STYLE D - Chisel Jaw GRMxD-x-xxxxx-xx B B1 P3 F B3 P F5 J6 F3 X 1/8 NPT [1/8 BSP] PORT JAW PIVOT B J7 J J9 () J3 J8 M8 x 1.5 THREAD THRU ( ONLY) J J5 T1 F1 (ADJUSTABLE) J16 (PARALLEL) J1 J1 (OPEN MAX) LETTER DIM B1 B B3 B F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J9 J16 (PARALLEL) P P3 T1** MODEL NUMBER GRMxD in mm * TOLERANCE FOR J3 & J =.003 [.076] ( ONLY) ** T1 IS THE LARGEST AVAILABLE. TE: SEE DIMENSION AND MOUNTING BRACKET PAGES. GRMxD-x-xxxxx-00 S MAX B1 P3 B J15 (OPEN) F B3 P F5 JAW PIVOT J6 F3 B X 1/8 NPT [1/8 BSP] PORT J7 J J9 () J3 J8 M8 x 1.5 THREAD THRU ( ONLY) J J5 F1 (ADJUSTABLE) J16 (PARALLEL) T1 J1 (OPEN MAX) J1 LETTER DIM B1 B B3 B F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J9 J15 (OPEN) J16 (PARALLEL) P P3 S*** T1** MODEL NUMBER GRMxD in mm * TOLERANCE FOR J3 & J =.003 [.076] ( ONLY) ** T1 IS THE LARGEST AVAILABLE. ***S DIMENSION OCCURS ON -00 ONLY. TES: 1) SEE DIMENSION AND MOUNTING BRACKET PAGES. ) THE 0 JAW ROTATES 3 DURING THE CYCLE, OPENING THE END OF THE JAW.079 [.0]. THE JAW RETURNS TO THE 0 POSITION AS THE OPPOSING JAW REACHES FULL OPEN OR CLOSED. 10 All dimensions are reference only unless specifically toleranced.

11 DIMENSIONS: SINGLE SHOVEL JAW STYLE H - S & GRMxH-x-xxxxx-00 GRMxH-x-xxxxx-00 S (MAX) B1 P3 B J15 (OPEN) P F B3 P P3 F5 X 1/8 NPT [1/8 BSP] PORT B JAW PIVOT J6 F3 B5 PORT LOCATION GRMxx UNITS ONLY X 1/8 NPT [1/8 BSP] PORT J7 J J1 J3 J9 () J8 M8 x 1.5 THREAD THRU ( ONLY) J J5 T1 F1 (ADJUSTABLE) J1 J1 (OPEN MAX) J16 (PARALLEL) LETTER DIM B1 B B3 B B5 F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J9 J1 J15 (OPEN) J16 (PARALLEL) P P3 S*** T1** All dimensions are reference only unless specifically toleranced. MODEL NUMBER GRMxH GRMxH in mm in mm * TOLERANCE FOR J3 & J =.003 [.076] ( ONLY) ** T1 IS THE LARGEST AVAILABLE. ***S DIMENSION OCCURS ON -00 ONLY. TES: 1) SEE DIMENSION AND MOUNTING BRACKET PAGES. ) THE 0 JAW ROTATES 1.7 DURING THE CYCLE, OPENING THE END OF THE JAW.10 [.6]. THE JAW RETURNS TO THE 0 POSITION AS THE OPPOSING JAW REACHES FULL OPEN OR CLOSED. DIMENSIONS: DOUBLE SHOVEL JAW STYLE J - S & GRMxJ-x-xxxxx-00 GRMxJ-x-xxxxx-00 B1 S (MAX) P3 B J15 (OPEN) P F B3 P F5 X 1/8 NPT [1/8 BSP] PORT P3 JAW PIVOT F3 B J6 B5 X 1/8 NPT [1/8 BSP] PORT J5 J7 J PORT LOCATION GRMxx UNITS ONLY J1 J9 () J3 J8 M8 x 1.5 THREAD THRU ( ONLY) J T1 F1 (ADJUSTABLE) J1 J1 (OPEN MAX) J16 (PARALLEL) LETTER DIM B1 B B3 B B5 F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J9 J1 J15 (OPEN) J16 (PARALLEL) P P3 S*** T1** MODEL NUMBER GRMxJ GRMxJ mm in mm in * TOLERANCE FOR J3 & J =.003 [.076] ( ONLY) **T1 IS THE LARGEST AVAILABLE. ***S DIMENSION OCCURS ON -00 ONLY. TES: 1) SEE DIMENSION AND MOUNTING BRACKET PAGES. ) THE 0 JAW ROTATES 1.7 DURING THE CYCLE, OPENING THE END OF THE JAW.10 [.6]. THE JAW RETURNS TO THE 0 POSITION AS THE OPPOSING JAW REACHES FULL OPEN OR CLOSED. 11 Shovel Jaw

12 DIMENSIONS: SINGLE FLAT SHOVEL JAW STYLE L - Flat Shovel Jaw GRMxL-x-xxxxx-00 MP P B1 B6 B B3 P F F3 F5 B JAW PIVOT X 1/8 NPT [1/8 BSP] PORT B5 J7 J J11 M8 x 1.5 THREAD THRU ( ONLY) J J5 T1 F1 (ADJUSTABLE) J6 J3 J8 J9 J10 J1 J16 (PARALLEL) J1 (OPEN MAX) MT X THRU HOLE FOR MP3 SHCS M MT1 MP MT3 LOCKING THREAD MT DEEP MIN PLACES * TOLERANCE FOR J3 & J =.003 [.076] ** T1 IS THE LARGEST AVAILABLE. TE: SEE DIMENSION PAGE FOR OTHER WIDTHS LETTER DIM B1 B B3 B B5 B6 F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J9 J10 J11 J16 (PARALLEL) P M MP MP3 MP MT1 MT MT3 MT T1** MODEL NUMBER GRMxL in mm / M M6 x 1.0 DIMENSIONS: DOUBLE FLAT SHOVEL JAW STYLE M - GRMxM-x-xxxxx-00 B1 MP B6 P B B3 P F F5 B F3 JAW PIVOT X 1/8 NPT [1/8 BSP] PORT B5 J7 J J11 M8 X 1.5 THREAD THRU ( ONLY) J T1 J5 F1 (ADJUSTABLE) J6 J3 J8 J9 J1 J10 J1 (OPEN MAX) J16 (PARALLEL) MT X THRU HOLE FOR MP3 SHCS M MT1 MP MT3 LOCKING THREAD MT DEEP MIN PLACES * TOLERANCE FOR J3 & J =.003 [.076] ** T1 IS THE LARGEST AVAILABLE. TE: SEE DIMENSION PAGE FOR OTHER WIDTHS LETTER DIM B1 B B3 B B5 B6 F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J9 J10 J11 J16 (PARALLEL) P M MP MP3 MP MT1 MT MT3 MT T1** MODEL NUMBER GRMxM in mm / M M6 x All dimensions are reference only unless specifically toleranced.

13 DIMENSIONS: FLANGE JAW STYLE F - S & GRMxF-x-xxxxx-00xxx GRMxF-x-xxxxx-00xxx B1 P3 B J15 (OPEN) B3 F P X 1/8 NPT [1/8 BSP] PORT F5 B JAW PIVOT J6 F3 J1 J8 J16 (PARALLEL) J3 J J5 T1 F1 (ADJUSTABLE) J7 J J1 (OPEN MAX) J1 X M8 x 1.5 THREAD (THRU BOTH JAWS) LETTER DIM B1 B B3 B F1 MAX F1 MIN F3 F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J1 J15 (OPEN) J16 (PARALLEL) P P3 T1** MODEL NUMBER GRMxF GRMxF in mm in mm * TOLERANCE FOR J3 & J =.003 [.076] ** T1 IS THE LARGEST AVAILABLE. P P3 PORT LOCATION GRMxx UNITS ONLY X 1/8 NPT (1/8 BSP) PORT TES: 1) SEE DIMENSION AND MOUNTING BRACKET PAGES. ) THE 0 JAW ROTATES 1.7 DURING THE CYCLE, OPENING THE END OF THE JAW.035 [0.9]. THE JAW RETURNS TO THE 0 POSITION AS THE OPPOSING JAW REACHES FULL OPEN OR CLOSED. GRMxF-x-50xxx-xxx B B1 P3 B3 F F5 JAW PIVOT J6 F3 B J8 J J5 T1 F1 (ADJUSTABLE) J1 (OPEN MAX) J1 P J1 X 1/8 NPT J3 [1/8 BSP] PORT J16 X M8 x 1.5 THREAD (PARALLEL) (THRU BOTH JAWS) J7 J LETTER DIM B1 B B3 B F1 MAX F1 MIN F3 F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J1 J16 (PARALLEL) P P3 T1** MODEL NUMBER GRMxF in mm * TOLERANCE FOR J3 & J =.003 [.076] ** T1 IS THE LARGEST AVAILABLE. TE: SEE DIMENSION AND MOUNTING BRACKET PAGES. Flange Jaw All dimensions are reference only unless specifically toleranced. 13

14 DIMENSIONS: JAW STYLES N & P - GRMxN-x-xx-xx GRMxP-x-xx-xx B1 P3 B J15 (OPEN) F B3 P F5 B J6 JAW PIVOT J7 J J J8 J5 F1 (ADJUSTABLE) J1 (OPEN MAX) J1 J16 (PARALLEL) LETTER DIM B1 B B3 B F1 MAX F1 MIN F F5 J1 J1 (OPEN MAX) J J - JAW STYLE N J - JAW STYLE P J5 J6 J7 J8 J15 (OPEN) J16 (PARALLEL) P P3 MODEL NUMBER GRMxN in TES: 1) SEE MOUNTING BRACKET PAGES. mm X 1/8 NPT [1/8 BSP] PORT Needlenose/ Hammerhead GRMxN-x-xx-00 GRMxP-x-xx-00 B1 P3 B J15 (OPEN) F B3 P F5 J6 B JAW PIVOT X 1/8 NPT [1/8 BSP] PORT J7 J J J8 J5 F1 (ADJUSTABLE) J1 (OPEN MAX) J1 J16 (PARALLEL) LETTER DIM B1 B B3 B F1 MAX F1 MIN F F5 J1 J1 (OPEN MAX) J J - JAW STYLE N J - JAW STYLE P J6 J7 J8 J15 (OPEN) J16 (PARALLEL) P P3 MODEL NUMBER GRMxP in mm TES: 1) SEE MOUNTING BRACKET PAGES. ) THE 0 JAW ROTATES.5 DURING THE CYCLE, OPENING THE END OF THE JAW.118 [3.0]. THE JAW RETURNS TO THE 0 POSITION AS THE OPPOSING JAW REACHES FULL OPEN OR CLOSED. 1 All dimensions are reference only unless specifically toleranced.

15 DIMENSIONS: HOOK JAW STYLE K - GRMxK-x-xxxxx-xxxxx F5 J J5 T1 F6 B B3 J1 B1 P3 (OPEN MAX) X M8 x 1.5 THREAD (THRU BOTH JAWS) P X 1/8 NPT [1/8 BSP] PORT B (OPEN MAX) B JAW PIVOT J3 B5 J16 (PARALLEL) J8 F1 (ADJUSTABLE) J6 J7 J1 J1 LETTER DIM B1 B B3 B B (OPEN MAX) B5 F1 MAX F1 MIN F5 F6 J1 J1 (OPEN MAX) J3* J* J5 J6 J7 J8 J1 J16 (PARALLEL) P P3 T1** MODEL NUMBER GRMxK in mm * TOLERANCE FOR J3 & J =.003 [.076] **T1 IS THE LARGEST AVAILABLE. TES: 1) SEE DIMENSIONS AND MOUNTING BRACKET PAGES. ) THE 0 JAW ROTATES DURING THE CYCLE, OPENING THE END OF THE JAW.098 [.5]. THE JAW RETURNS TO THE 0 POSITION AS THE OPPOSING JAW REACHES FULL OPEN OR CLOSED. Hook Jaw All dimensions are reference only unless specifically toleranced. 15

16 DIMENSIONS: TOOLABLE JAW STYLE G - S & GRMxG-x-xx-xx GRMxG-x-xx-xx J J J19*** J19*** B P3 B1 F B3 P F5 X 1/8 NPT [1/8 BSP] PORT B JAW PIVOT J18 X FOR J9 SHCS J10 LOCKING THREAD THRU J7 PORT LOCATION GRMxx UNITS ONLY FB1 J J5 J1 J0 C L OF THREAD TO C L OF THREAD J16 (PARALLEL) J17 J8 F1 ADJUSTABLE J1 J1 (OPEN MAX) LETTER DIM B1 B B3 B F1 MAX F1 MIN F F5 J1 (PARALLEL) J1 (OPEN MAX) J (PARALLEL) J* J5 J7 J8 J9 J10 J16 (PARALLEL) J17 J18 J19 J0 J1 P P3 FB1** MODEL NUMBER GRMxG GRMxG in mm in mm / M6 5/16 M8 M8 x x * TOLERANCE FOR J DIM =.003 [.076] ** FB1 IS A CLEARANCE FOR JAWS TO PASS EACH OTHER FOR 70 x 70 JAW ROTATIONS ONLY *** J19 DIMENSION IS C L OF TO C L OF THREAD TE: SEE MOUNTING BRACKET PAGE P P3 X 1/8 NPT [1/8 BSP] PORT Toolable Jaw GRMxG-x-xx-00 GRMxG-x-xx-00 J J J19** J19** P3 B1 B J15 (OPEN) F B3 P F5 X 1/8 NPT [1/8 BSP] PORT B JAW PIVOT J18 X FOR J9 SHCS J10 LOCKING THREAD THRU J7 J1 J5 J0 C L OF THREAD TO C L OF THREAD J J1 J1 (OPEN J16 MAX) (PARALLEL) J17 J8 F1 ADJUSTABLE LETTER DIM B1 B B3 B F1 MAX F1 MIN F F5 J1 (PARALLEL) J1 (OPEN MAX) J (PARALLEL) J* J5 J7 J8 J9 J10 J15 (OPEN) J16 (PARALLEL) J17 J18 J19 J0 J1 P P3 MODEL NUMBER GRMxG GRMxG in mm in mm / M6 5/16 M8 M8 x x PORT LOCATION GRMxx UNITS ONLY * TOLERANCE FOR J DIM =.003 [.076] ** J19 DIMENSION IS C L OF TO C L OF THREAD TE: SEE MOUNTING BRACKET PAGES. P P3 X 1/8 NPT [1/8 BSP] PORT 16 All dimensions are reference only unless specifically toleranced.

17 EFFECTIVE ING RANGE: TOOLABLE JAW STYLE G The effective clamping range is defined as the range where the clamp develops the greatest amount of grip force. The effective clamping range occurs between the beginning (C1) and ending jaw positions as shown below. Within this clamping range the jaws are locked in position even if pressure is lost. The effective clamping range, for each jaw, is from.75 open to -0.5 closed (past parallel). BEGINNING ING RANGE LETTER DIM C1 MODEL NUMBER GRMxG GRMxG mm in in *C1 DIMENSION IS THE BEGINNING OF THE EFFECTIVE ING RANGE MEASURED AT THE CORNER OF THE JAW ENDING POSITION mm (OPEN) C1* TES: 1) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm. ) ANGULAR DIMENSIONS ARE MEASURED IN DEGREES. TOTAL FORCE (Cf) To achieve maximum clamp force, custom tooling must be designed to grip the part with the jaws located in the high force range. The greatest amount of clamp force occurs during the last 1.5 of each jaw s rotation. Refer to the picture for high grip force range. PRESSURE (psi) x Cf x Cf MULLIER DISTANCE FROM JAW PIVOT (in) PRESSURE (bar) x Cf x Cf MULLIER DISTANCE FROM JAW PIVOT (mm) = TOTAL FORCE (lb) = TOTAL FORCE (N) MODEL GRMxG-x-xx-xx GRMxG-x-xx-xx Cf External Grip Imperial Metric FORCE MULLIER FOR GRMxG AND GRMxG TE: The force multiplier with the jaws rotated between -.5 and +.75 is 1.0. Cf MULLIER GRMxG GRMxG POWER UP REGION JAW POSITION (degree) HIGH GRIP FORCE RANGE PARALLEL PARALLEL 3.00 Toolable Jaw POWER UP REGION TE: ANGULAR DIMENSIONS ARE MEASURED IN DEGREES. All dimensions are reference only unless specifically toleranced. 17

18 FINGER BLANKS: TOOLABLE JAW STYLE G FB3 FB CUTOUT REQUIRED TO CLEAR 70 x 70 JAW ONLY FB1 MOUNTING SURFACE THIS SURFACE TO BE USED TO REGISTER AGAINST THE END OF THE JAW FB Toolable Jaw FB9 FB11 FB10 FB1 FB13 FB5 FB1 FB6 FB7 FB8 LOCKING THREAD THIS CUTOUT IS REQUIRED FOR GRMxxG-x UNITS ONLY (IT ALLOWS CLEARANCE FOR OPPOSITE JAW TO PASS WHEN JAWS ARE IN FULL OPEN POSITION) LETTER DIM FB1 FB FB3 FB FB5 FB6 FB7 FB8 FB9 FB10 FB11 FB1 FB13 FB1 MODEL NUMBER GRMxG GRMxG in mm in mm M6 x 1.0 M8 x INFORMATION FOR APPLYING FINGER BLANKS OR CUSTOM TOOLING 1. Finger blanks are made from 6061 aluminum. The outside surfaces are vibratory polished.. G jaws are made from 10 steel, through hardened 30 to 35 Rc. They are machinable; customers can modify the jaws to mount special tooling. Consult PHD on jaw modifications. 3. G jaws are not in line with each other. They are shifted off center by dimension J19 (see chart). This is necessary to clear the cam portion of the opposite jaw when opening 70. Finger blanks or custom tooling must also clear this cam area when opening 70 (see dim FB1 on dimensional page). Consider the J19 offset dimension when modifying finger blanks or making special tooling so that the tooling can align properly. Jaw width is controlled so tooling can be slotted to key into place. The end of the jaws are accurately machined to provide a tooling length registration stop. Jaw mounting threads J10 (see chart) can accept fasteners from inside or outside. They are self-locking when the fasteners are installed from the outside (as shown) and torqued properly. Use the mounting geometry shown shaded on finger blanks (5 chamfer, cutout for 70 opening, thread locations and J19 offset dimensions) to design custom tooling.. Standard aluminum finger blanks can be used without the need for speed controls on the clamp. Dual rotation stops must be used on G jaws as shown. For custom finger blanks that are heavier, longer, or wider than the finger blanks shown, consult PHD for approval. MODEL NUMBER GRMx GRMx JAW ROTATIONS All Other Rot All Other Rot. KIT INCLUDES: 1 FINGER BLANK MOUNTING SCREWS FINGER BLANK KIT NUMBER N/A WEIGHT PER FINGER BLANK lb kg All dimensions are reference only unless specifically toleranced.

19 DIMENSIONS: SHORT JAW STYLE R - GRMxR-x-xxxxx-xxxxx B1 F5 F B J J5 T1 P3 B3 P X 1/8 NPT [1/8 BSP] PORT B JAW PIVOT J J7 J3 X M8 x 1.5 THREAD (THRU BOTH JAWS) J8 J1 J16 (PARALLEL) F3 F1 (ADJUSTABLE) J1 (OPEN MAX) LETTER DIM B1 B B3 B F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J7 J8 J16 (PARALLEL) P P3 T1** MODEL NUMBER GRMxR in mm * TOLERANCE FOR J3 & J =.003 [.076] ** T1 IS THE LARGEST AVAILABLE. TE: SEE DIMENSION AND MOUNTING BRACKET PAGES. GRMxR-x-xxxxx-00xxx F5 F B J J5 T1 B1 P3 J15 (OPEN) B3 P JAW PIVOT F3 B J X 1/8 NPT [1/8 BSP] PORT J7 J3 X M8 x 1.5 THREAD (THRU BOTH JAWS) J8 J1 (OPEN J1 MAX) J16 (PARALLEL) F1 (ADJUSTABLE) LETTER DIM B1 B B3 B F1 MAX F1 MIN F3 F F5 J1 J1 (OPEN MAX) J J3* J* J5 J6 J7 J8 J15 (OPEN) J16 (PARALLEL) P P3 T1** MODEL NUMBER GRMxR in mm * TOLERANCE FOR J3 & J =.003 [.076] ** T1 IS THE LARGEST AVAILABLE. TES: 1) SEE DIMENSION AND MOUNTING BRACKET PAGES. ) THE 0 JAW ROTATES 3 DURING THE CYCLE, OPENING THE END OF THE JAW.079 [.0]. THE JAW RETURNS TO THE 0 POSITION AS THE OPPOSING JAW REACHES FULL OPEN OR CLOSED. Short Jaw All dimensions are reference only unless specifically toleranced. 19

20 MOUNTING: jaw styles s, c, d, k, L, M, & R MOUNTING GRM Clamps DOUBLE DIAMOND POINT PAD (-DDB, -DDS, -DDG, -DDR) SINGLE DIAMOND POINT PAD (-SDB,-SDS, -SDG, -SDR) DOUBLE CONE POINT (-DCB, -DCS, -DCG, -DCR) SINGLE M8 LHCS CONE POINT (-SCB, -SCS, -SCG, -SCR) M6 SHCS SINGLE URETHANE PAD (-SUB) RECOMMENDED COMBINATIONS DCx DDx (See Tip Dimensions page.) DUB SUB DOUBLE URETHANE PAD (-DUB) SDx SCx Jaw Styles S, K & R only DDx DDx DUB SUB SDx SDx JAW OPTIONS - JAW STYLES S, C, D, K, L, & M Material Thickness 0 to 1.51 to 3.01 to.01 to 1.50 mm 3 mm mm 5 mm* Color Black Silver Gold Red No tip Blank Blank Blank Blank Single Cone Point SCB SCS SCG SCR Double Cone Point DCB DCS DCG DCR Single Diamond Point SDB SDS SDG SDR Double Diamond Point DDB DDS DDG DDR Single Urethane Pad SUB SUB SUB SUB Double Urethane Pad DUB DUB DUB DUB Material Thickness 0 to 1.51 to 3.01 to.01 to 1.50 mm 3 mm mm 5 mm* Color Black Silver Gold Red No tip Blank Blank Blank Blank Single Cone Point SCB SCS SCG SCR Double Cone Point DCB DCS DCG DCR Single Diamond Point SDB SDS SDG SDR Double Diamond Point DDB DDS DDG DDR Single Urethane Pad SUB SUB SUB SUB Double Urethane Pad DUB DUB DUB DUB JAW OPTIONS - JAW STYLE R Material Thickness 0 to 1.51 to 3.01 to 1.50 mm 3 mm mm Color Black Silver Red No tip Blank Blank Blank Single Cone Point SCB SCS SCR Double Cone Point DCB DCS DCR Single Diamond Point SDB SDS SDR Double Diamond Point DDB DDS DDR Single Urethane Pad SUB SUB SUB Double Urethane Pad DUB DUB DUB Material Thickness 0 to 1.51 to 3.01 to 1.50 mm 3 mm mm Color Black Silver Red No tip Blank Blank Blank Single Cone Point SCB SCS SCR Double Cone Point DCB DCS DCR Single Diamond Point SDB SDS SDR Double Diamond Point DDB DDS DDR Single Urethane Pad SUB SUB SUB Double Urethane Pad DUB DUB DUB 0 TES: 1) Cone point against cone point tip combinations are not allowed due to point overlap. ) Red tips are available only on GRM size. 3) *Material thickness for L and M jaw styles =.01 to.5 mm. ) Jaw B tip options are not available for jaw styles C, D, L, & M

21 mounting: shovel JAW STYLEs h & j MOUNTING M8 LHCS DOUBLE DIAMOND POINT PAD (-DDB, -DDS, -DDG, -DDR) SINGLE DIAMOND POINT PAD (-SDB,-SDS, -SDG, -SDR) DOUBLE CONE POINT (-DCB, -DCS, -DCG, -DCR) SINGLE CONE POINT (-SCB, -SCS, -SCG, -SCR) M6 SHCS GRM Clamps SINGLE URETHANE PAD (-SUB) RECOMMENDED COMBINATIONS (See Tip Dimensions page.) DOUBLE URETHANE PAD (-DUB) DDx DCx DUB SUB SDx SCx COMBINATIONS SINGLE SHOVEL POINT JAW OPTIONS - JAW STYLES H & J Material Thickness 0 to 1.51 to 3.01 to.01 to 1.50 mm 3 mm mm.5 mm Color Black Silver Gold Red No tip Blank Blank Blank Blank Single Cone Point SCB SCS SCG SCR Double Cone Point DCB DCS DCG DCR Single Diamond Point SDB SDS SDG SDR Double Diamond Point DDB DDS DDG DDR Single Urethane Pad SUB SUB SUB SUB Double Urethane Pad DUB DUB DUB DUB TES: 1) Cone point against cone point tip combinations are not allowed due to point overlap. ) Red tips are available only on GRM size. M6 SHCS DOUBLE SHOVEL POINT M6 SHCS SINGLE CONE (-xxscb, -xxscs) (-xxscg, -xxscr) EXTENSION EXTENSION EXTENSION EXTENSION DOUBLE URETHANE (-xxdub) SINGLE URETHANE (-xxsub) SINGLE SHOVEL JAW SINGLE DIAMOND (-xxsdb, -xxsds) (-xxsdg, -xxsdr) M8 LHCS DOUBLE CONE (-xxdcb, -xxdcs) (-xxdcg, -xxdcr) M8 LHCS DOUBLE DIAMOND (-xxddb, -xxdds) (-xxddg, -xxddr) DOUBLE SHOVEL JAW 1

22 MOUNTING: FLANGE JAW STYLE F MOUNTING GRM Clamps M8 LHCS DOUBLE DIAMOND POINT PAD (-DDB, -DDS, -DDG, -DDR) SINGLE DIAMOND POINT PAD (-SDB,-SDS, -SDG, -SDR) DOUBLE CONE POINT (-DCB, -DCS, -DCG, -DCR) SINGLE CONE POINT (-SCB, -SCS, -SCG, -SCR) M6 SHCS SINGLE URETHANE PAD (-SUB) RECOMMENDED COMBINATIONS (See Tip Dimensions page.) DOUBLE URETHANE PAD (-DUB) DCx DDx DUB SUB SDx SCx DDx DDx DDx SDx SDx SDx JAW OPTIONS - JAW STYLE F 85 & 50 - Material Thickness 0 to.86 to 1.1 to 1.53 to 1.95 to.3 to.61 to 3.01 to.85 mm 1.0 mm 1.5 mm 1.9 mm.9 mm.6 mm 3.0 mm 3. mm Color Black Silver Gold Silver Gold Gold Red Red No Tip Blank Blank Blank Blank Blank Blank Blank Blank Single Cone Point SCB SCS SCG SCS SCG SCG SCR SCR Double Cone Point DCB DCS DCG DCS DCG DCG DCR DCR Single Diamond Point Pad SDB SDS SDG SDS SDG SDG SDR SDR Double Diamond Point Pad DDB DDS DDG DDS DDG DDG DDR DDR Single Urethane Pad SUB SUB SUB SUB SUB SUB SUB SUB Double Urethane Pad DUB DUB DUB DUB DUB DUB DUB DUB 85 & 50 - Material Thickness 0 to.86 to 1.1 to 1.53 to 1.95 to.3 to.61 to 3.01 to.85 mm 1.0 mm 1.5 mm 1.9 mm.9 mm.6 mm 3.0 mm 3. mm Color Black Black Black Silver Silver Gold Gold Red No Tip Blank Blank Blank Blank Blank Blank Blank Blank Single Cone Point SCB SCB SCB SCS SCS SCG SCG SCR Single Diamond Point Pad SDB SDB SDB SDS SDS SDG SDG SDR Double Diamond Point Pad DDB DDB DDB DDS DDS DDG DDG DDR Single Urethane Pad SUB SUB SUB SUB SUB SUB SUB SUB Double Urethane Pad DUB DUB DUB DUB DUB DUB DUB DUB TES: 1) Cone point against cone point tip combinations are not allowed due to point overlap. ) Red tips are available only on GRM size.

23 DIMENSIONS: SERIES GRM Clamps -SCB, -SCS, -SCG, -SCR SINGLE CONE POINT -SCB, -SCS, -SCG, -SCR SINGLE CONE POINT (FOR JAW STYLE H ONLY) GRM Clamps T T T5 MAX T5 MAX T1 HEX T1 HEX -DCB, -DCS, -DCG, -DCR DOUBLE CONE POINT EXTENSION - FOR USE WITH: -SDB, -SDS, -SDG, -SDR, -DCB, -DCS, -DCG, -DCR, -DDB, -DDS, -DDG, -DDR, -SUB, -DUB (FOR JAW STYLES H & J ONLY) T1 T5 MAX T T T T6 T1 T3 HEX T T3 HEX T5 MAX -SDB, -SDS, -SDG, -SDR SINGLE DIAMOND POINT PAD T -DDB, -DDS, -DDG, -DDR DOUBLE DIAMOND POINT PAD T5 MAX T T T T5 MAX T1 T1 T3 HEX T3 HEX -SUB SINGLE URETHANE PAD -DUB DOUBLE URETHANE PAD T T5 MAX T T T3 HEX T T5 MAX T1 T1 T3 HEX (See next page for Tip Dimensions chart.) 3

24 GRM Clamps DIMENSIONS: SERIES GRM Clamps * FOR USE WITH JAW STYLE H ONLY ** FOR USE WITH JAW STYLES H & J ONLY OPTION CODE -SCB -SCS -SCG -SCR -SDB -SDS -SDG -SDR -SUB -DCB -DCS -DCG -DCR -DDB -DDS -DDG -DDR -DUB -SCB* -SCS* -SCG* -SCR* EXT.** PART COLOR BLACK SILVER GOLD RED BLACK SILVER GOLD RED BLACK BLACK SILVER GOLD RED BLACK SILVER GOLD RED BLACK BLACK SILVER GOLD RED in mm T1 in mm T in mm T3 in mm T in mm T5 in mm T6 LETTER DIMENSION KIT NUMBER GRM-SCB-1 GRM-SCB-1 GRM-SCS-1 GRM-SCS-1 GRM-SCG-1 GRM-SCG-1 GRM-SCR-1 GRM-SDB-1 GRM-SDB-1 GRM-SDS-1 GRM-SDS-1 GRM-SDG-1 GRM-SDG-1 GRM-SDR-1 GRM-SUB-1 GRM-SUB-1 GRM-DCB-1 GRM-DCB-1 GRM-DCS-1 GRM-DCS-1 GRM-DCG-1 GRM-DCG-1 GRM-DCR-1 GRM-DDB-1 GRM-DDB-1 GRM-DDS-1 GRM-DDS-1 GRM-DDG-1 GRM-DDG-1 GRM-DDR-1 GRM-DUB-1 GRM-DUB UNIT

25 MOUNTING THREAD DIMENSIONS: SERIES GRM S REAR MOUNTING THREADS STANDARD IN ALL S GRM T MR1 MR3 LOCKING THREAD 3 PLACES GRM Clamps MR LETTER DIM MR1 MR MR3 MODEL NUMBER GRMTx GRMTx in mm in mm M6 x 1.0 x.13 [10.5] DP M8 x 1.5 x.51 [13.0] DP TE: 1) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm. GRM T MR1 MR3 LOCKING THREAD 3 PLACES MR OTHER POSSIBLE MOUNTING THREADS JAW PIVOT ALL GRM JAW STYLES (including Flange Jaw Style) MT MT1 MT5 MT7 LOCKING THREAD PLACES ALL GRM JAW STYLES (excluding Flange Jaw Style) X MT9 X MT8 JAW PIVOT MT MT1 MT3 MT6 MT3 MT LOCKING THREAD 3 PLACES EXISTING PORTS MT LOCKING THREAD 3 PLACES TES: 1) THE IMPACT PLATES HOLD THE PINS, USHING, AND SLIDER BUSHINGS IN PLACE. TAKE CARE T TO LOSE THEM IF THE COVERS ARE REMOVED. IF AN IMPACT PLATE IS REPLACED BY A CUSTOMER MOUNTING PLATE, THE PIVOT PIN AND SLIDER BUSHING SLOT MUST BE COVERED WITH A SMOOTH SURFACE TO CONTAIN THE PARTS. ) FASTENERS THAT ATTACH CUSTOM PLATES MUST T BE THREADED INTO THE SIDES OF THE BODY MORE THAN 8 mm OR THEY MAY INTERFERE WITH AND DAMAGE THE JAWS. 3) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm. LETTER DIM MT1 MT MT3 MT MT5 MT6 MT7 MT8 MT9 MODEL NUMBER GRMxx GRMxx in mm in mm M6 x 1.0 x.315 [8.0] DP M6 x 1.0 x.35 [9.0] DP M6 x 1.0 x.50 [6.3] DP M6 x 1.0 x.7 [1.0] DP All dimensions are reference only unless specifically toleranced. 5

26 mounting bracket dimensions: series grm clamps 90 SPHERICAL MOUNTING BRACKET GRM Clamps GRMx C M6 M TUBE M8 M9 M7 M LETTER DIM M M3* M M5 M6 M7 M8 M MODEL NUMBER GRMCx GRMCx (GRMCx-B08) in mm in mm *TOLERANCE FOR M3 =.001 [ 0.03] JAW PIVOT PANEL LOCATION M3 THRU X 3 HEX M x HEX TES: 1) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm. ) BRACKET MAY ROTATE 360 ABOUT M TUBE AND BODY. KIT DESCRIPTION 90 SPHERICAL MOUNTING BRACKET IMPERIAL GRMCx KIT NUMBER GRMCx (GRMCx-B08) METRIC IMPERIAL METRIC All dimensions are reference only unless specifically toleranced.

27 mounting bracket dimensions: series grm clamps N-SPHERICAL MOUNTING BRACKET GRMx R M7 M TUBE M5 M3 THRU GRM Clamps M6 M8 0 RAD M9.197 TES: [5.0] HEX 1) NUMBER IN [ ] ARE FOR METRIC UNITS AND ARE IN mm. ) BRACKET MAY ROTATE 360 ABOUT M TUBE. 1 RAD CAN BE ROTATED 360 WITHIN BRACKET LETTER DIM M3* M M5 M6 M7 M8 M9 0 1 GRMRx in mm * - TOLERANCE FOR M3 =.006 [ 0.15] MODEL NUMBER GRMRR in mm GRMRx in mm GRMRx KIT DESCRIPTION IMPERIAL METRIC N-SPHERICAL MOUNTING BRACKET KIT NUMBER GRMRx IMPERIAL METRIC SPHERICAL MOUNTING BRACKET GRMx S GRMx W 30 M7 M TUBE M5 M3 THRU 30 M6 M8 0 RAD M9.197 TES: [5.0] HEX 1) NUMBER IN [ ] ARE FOR METRIC UNITS AND ARE IN mm. ) BRACKET MAY ROTATE 360 ABOUT M TUBE. 3) W IS FOR OVER SPHERICAL MOUNTING BRACKET. 1 RAD CAN BE ROTATED 360 WITHIN BRACKET LETTER DIM M3* M M5 M6 M7 M8 M9 0 1 GRMSx in mm MODEL NUMBER GRMSR in mm GRMSx in mm LETTER DIM M3* M** M5 M6 M7 M8 M9 0 1 GRMWx in mm MODEL NUMBER GRMWR in mm GRMWx in mm * TOLERANCE FOR M3 =.001 [ 0.03] * TOLERANCE FOR M3 =.00 [ 0.05] **TOLERANCE FOR [33.3] = [+0.5/-0.0] KIT NUMBER GRMSx GRMSx KIT DESCRIPTION IMPERIAL METRIC IMPERIAL METRIC SPHERICAL MOUNTING BRACKET KIT NUMBER GRMWx GRMWx KIT DESCRIPTION IMPERIAL METRIC IMPERIAL METRIC OVER SPHERICAL MOUNTING BRACKET All dimensions are reference only unless specifically toleranced. 7

28 mounting bracket dimensions: series grm clamps REAR SPHERICAL MOUNTING BRACKET GRMx A GRM Clamps GRMx B M7 M5.197 [5.0] HEX M6 M TUBE M8 M3 M9 TES: 1) THE SPHERICAL FUNCTION CAN BE ELIMINATED BY ALIGNING THE TUBE WITH THE CENTERLINE AND PUSHING IT IN UNTIL IT BOTTOMS. AT THIS POINT, THE TUBE CAN SPIN, BUT T SWIVEL THE 15. ) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm. 3) TUBE CAN SPIN 360 ABOUT M TUBE. ) B IS FOR OVER REAR SPHERICAL MOUNTING BRACKET LETTER DIM M3* M M5 M6 M7 M8 M9 GRMAx in mm * TOLERANCE FOR M3 =.001 [ 0.03] MODEL NUMBER GRMAR in mm GRMAx in mm LETTER DIM M3* M** M5 M6 M7 M8 M9 GRMBx in mm MODEL NUMBER GRMBR in mm GRMBx in mm * TOLERANCE FOR M3 =.00 [ 0.05] **TOLERANCE FOR [33.3] = [+0.5/-0.0] KIT NUMBER GRMAx GRMAx KIT DESCRIPTION IMPERIAL METRIC IMPERIAL METRIC REAR SPHERICAL MOUNTING BRACKET KIT NUMBER GRMBx GRMBx KIT DESCRIPTION IMPERIAL METRIC IMPERIAL METRIC OVER REAR SPHERICAL MOUNTING BRACKET REAR MOUNTING PLATE GRMx P M8 M9 0 HEX M5 X THRU HOLE FOR M7 SHCS M3 M6 M LETTER DIM M3 M M5 M6 M7 M8 M9 0 GRMPx in mm / M MODEL NUMBER GRMPR in mm / M GRMPx in mm /16 M KIT NUMBER GRMPx GRMPx KIT DESCRIPTION IMPERIAL METRIC IMPERIAL METRIC REAR MOUNTING PLATE All dimensions are reference only unless specifically toleranced.

29 PORT FITTING DIMENSIONS: series grm clamps -LAA OPTION - Metal Fittings -LBB OPTION - Plastic Fittings -LCC OPTION - Metal Fittings GRM Clamps PF1 PF SELF SEALING SWIVEL MALE ELBOW FOR 1/" [6 mm] TUBING FITTINGS MAY SWIVEL 360 FROM LOCATION SHOWN (WITHOUT MOUNTING BRACKET) CLOSED PORT PF1 PF3 HEX PF OPEN PORT LETTER DIMENSION PF1 (MIN) PF1 (MAX) PF PF3 - LAA - LBB - LCC PF - LAA - LBB - LCC PORT FITTING OPTION in / 1/ mm SELF SEALING SWIVEL MALE ELBOW FOR PF TUBING TO ORDER FITTING SEPARATELY, FOR LAA OPTION: PART IMPERIAL PART METRIC FOR LBB OPTION: PART IMPERIAL PART METRIC FOR LCC OPTION: PART METRIC PF3 HEX OPEN PORT CLOSED PORT FITTINGS MAY SWIVEL 360 FROM LOCATION SHOWN (WITHOUT MOUNTING BRACKET) TE: CLOSED PORTS ARE MARKED WITH THE LETTER C. All dimensions are reference only unless specifically toleranced. 9

30 ORDERING DATA: ACCESSORIES GRM Accessories Index GRM Accessories Body...pages 3 to 35 General...pages 36 to 39 Impact Plate... pages 0 & 1 Jaw... pages & 3 Mounting...pages to 6 Switch...page 7 Switch Mounting Body...page 8 Switch Mounting...pages 9 to 58 Tip...pages 59 to 73 Seal...page 7 Kits...page 75 ADDITIONAL - Bxx - Gxx - Hxx - JAxx - JBxx - Mxx - Sxx - SBxx - BODY OPTIONS MOUNTING OPTIONS GENERAL OPTIONS (MISCELLANEOUS) IMPACT PLATE OPTIONS SWITCH OPTIONS (specific switch) SWITCH MOUNTING OPTIONS - BODY JAW OPTIONS - JAW OPTIONS - 30

31 Example: UNIT JAW STYLE OPTION JAW OPENING A JAW OPENING B PORT FITTINGS GRM Accessories GRM T S DCB - 5 DDB - LAA - ADDITIONAL OPTIONS MOUNTING DESIGN. - Imperial 6 - Metric JAW OPTIONS - JAW OPTIONS - (See below) BASE NUMBER OPTIONS Pxxxx - Dxxxx - Kxxxx - PS(R)xxx - TAxxx - TBxxx - Vx OPTIONS - SWITCH MOUNTING OPTIONS SWITCH MOUNTING OPTIONS OPTIONS - SEAL OPTIONS SWITCH MOUNTING OPTIONS SWITCH MOUNTING OPTIONS GENERAL TES: 1) For ordering data: SHADED CODES are required for this option. BORDERED CODES will normally be ordered. All unshaded model codes are for example only. For compatibility with other units, consult PHD. 31

32 BODY OPTIONS: ACCESSORIES - Bxx Body BODY OPTIONS B0 - Larger port orifices B05 - Blade mounting B06 - Rear plate mount with side ports B07 - Rear plate mount with rear ports B08 - High force clamp x B08A - High force clamp x with rear ports B09 - Position ports B0 LARGER PORT ORIFICES This option enlarges both port orifices in the body. It allows the jaws to open or close much faster than standard. Expect clamps to open or close faster than 5 clamps, and 5 clamps to open or close faster than 75 clamps. Available on GRM. GRMTS--5DCB-5DDB-LAA -B0 BODY PART NUMBERS IF ORDERED SEPARATELY & MODEL xc, D, H, J, N, P, R, & S xf & K IMPERIAL PORTS METRIC B05 BLADE MOUNTING GRMTS Shown This option provides mounting that interchanges with Destaco 8A3 series clamps. The body sides have mounting grooves with two M6 threads per side. The rear surface of the body has four M6 threads. The ports have been moved to position. Jaw styles C, D, G, H, J, N, P, R, S, F, and K are available with the B05 body. For jaw dimensions from the pivot pin forward, see the Series GRM section. Mounts R, S, W, A, B, P, and C do not fit on a B05 body. Available on GRM. GRMTF Shown GRM T S--5DCB-5DDB -LAA -B05 BODY KIT NUMBERS & MODEL xc, D, G, H, J, N, P, R, & S xf & K Kit includes: 1 Body and Cap 1 Cap Seal and 1 Rod Seal Cap Mounting Screws KIT IMPERIAL METRIC IMPACT PLATE KITS & MODEL xc, D, G, H, J, N, P, R, & S xf & K IMPACT PLATE EARS 0 ears 0 ears KIT NUMBER Kit includes: Impact Plates Mounting Screws For non-standard impact plate kits, see Impact Plates section. 3

33 BODY OPTIONS: ACCESSORIES B06 REAR PLATE MOUNT WITH SIDE PORTS GRMTS Shown This option provides a rear mounting plate integral to the body, ports are located on the sides of the plate. The rear surface has four M6 threads identical to the T mount and four thru holes identical to the P mount. Overall length is.55 in [1.0 mm] shorter than a standard body with a bolt on P mounting plate. The one piece body is compatible with R, S, W, A & B mounts. Available on GRM. GRMTF Shown Body GRMTS--5DCB-5DDB-LAA -B06 REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY & MODEL xc, D, G, H, J, N, P, R, & S xf & K BODY ASSEMBLY. IMPERIAL METRIC B07 REAR PLATE MOUNT WITH REAR PORTS This option provides a rear mounting plate integral to the body, ports are located on the rear and sides of the plate. Removable port plugs are installed in the side ports, with the rear ports open. The rear surface has four M6 threads identical to the T mount and four thru holes identical to the P mount. Overall length is.55 in [1.0 mm] shorter than a standard body with a bolt on P mounting plate. The one piece body is compatible with R, S, W, A & B mounts. Available on GRM. GRMTS Shown GRMTF Shown GRMTS--5DCB-5DDB-LAA -B07 REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY & MODEL xc, D, G, H, J, N, P, R, & S xf & K BODY ASSEMBLY. IMPERIAL METRIC

34 BODY OPTIONS: ACCESSORIES B08 HIGH FORCE X GRMTS Shown Body This option provides a clamp with more force (60 lb [06 N] with an S jaw style, 360 lb [1601 N] with a K jaw style). The cylinder portion of the clamp body houses a larger cylinder providing more clamp force with little added size and only a.5 lb [0. kg] weight adder over GRM clamps. Jaw styles C, D, G, H, J, N, P, R, S, F, and K are available with the B08 body. All GRM standard and accessory tips fit the B08. The larger cylinder requires the larger GRM mounting brackets. Available on GRM. GRMTF Shown GRM SS--5DCB-5DDB-LAA -B08 & MODEL xc, D, G, H, J, N, P, & S xr xk xf WEIGHT ADDER lb kg SPECIFICATIONS TOTAL FORCE at 87 psi [6 bar] lb N DISPLACEMENT OPEN CLOSE in cm in cm TE: 1)For tips, use GRM weights, dimensions, and kit numbers. )For mounting brackets, use GRM weights, dimensions, and kit numbers. MOUNTING BRACKET KIT NUMBERS (use size brackets) MOUNTING STYLE T A B C P R S W IMPERIAL none (std) METRIC none (std) B08A HIGH FORCE X WITH REAR PORTS This option provides a clamp with more force (see specification table below) and ports located in the slides and rear of the clamp. Removable port plugs are installed in the side ports, with the rear ports open. The cylinder portion of the clamp body houses a larger cylinder providing more clamp force with little added size and only a.8 lb [0.37 kg] weight adder over GRM clamps. Jaw styles C, D, G, H, J, N, P, R, S, F, and K are available with the B08A accessory. All GRM standard and accessory tips fit the B08A. The larger cylinder requires the larger GRM mounting brackets. (Mounting style A, B, and P are T available with this accessory.) Available on GRM. GRMTS Shown GRMTF Shown GRM TS--5DCB-5DDB-LAA -B08A & MODEL xc, D, G, H, J, N, P, & S xr xk xf TES: 3 SPECIFICATIONS TOTAL FORCE WEIGHT ADDER at 87 psi [6 bar] lb kg lb N DISPLACEMENT OPEN CLOSE in cm in cm ) For tips, use GRM weights, dimensions, and kit numbers. ) For mounting brackets, use GRM weights, dimensions, and kit numbers. MOUNTING BRACKET KIT NUMBERS (use size brackets) MOUNTING STYLE T C R S W IMPERIAL none (std) METRIC none (std) TE: Mounting style A, B, & P not available with this accessory.

35 BODY OPTIONS: ACCESSORIES B09 POSITION PORTS GRMTS Shown This option provides both ports in position of clamp (jaw A side of clamp). All jaw styles are available with the B09 body option. Available on GRM. GRMTF Shown GRMTS--5DCB-5DDB-LAA -B09 Body BODY PART NUMBER IF ORDERED SEPARATELY & MODEL xc, D, H, J, N, P, R, & S xf & K IMPERIAL PORTS METRIC

36 GENERAL OPTIONS: ACCESSORIES - Gxx GENERAL (MISCELLANEOUS) OPTIONS G01 - Continuity path G0 - Continuity path G07 - Aluminum jaw clamp G08 - Lifting jaws G09 - Lifting jaws G10 - Flip over jaw clamp General G01 to G0 CONTINUITY PATH This option provides a continuity path through the clamp for low voltage current. The current can be used as a signal to indicate a panel present. If a circuit is made (through one clamp, the panel, and the opposite clamp) then a panel is being gripped. The controller senses a high/low condition. No proximity switches are required. A special pivot pin with a M6 thread on one end extends through the retaining plate and hardened impact plate. Full impact plate adjustment is retained. A flanged locknut is provided to clamp your connector against the shoulder of the M6 thread. No special tips, jaws, or switches are required. The continuity feature does not work with urethane tips. The G0 accessory is not available for GRMxxF clamps. Available on GRM and GRM. GRMTS--5DCB-5DDB-LAA -G01 Kit includes: Pivot Pin Retaining Plate Impact Plate Flange Locknut 3 Screws xs, C, & D xs, C, D, H, & J xr xr xf xx xs xs, H, & J xf xx REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY ACCESSORY G01, G0 G01, G0 G01, G0 G01, G0 G01 G01, G0 G01, G0 G01, G0 G01 G01, G0 G01 Shown JAW ROTATION 75x75, 5x5, x 75x00, 5x00, x00 60x60, 5x5, 35x35, x 60x00, 5x00, x00 85x00, 50x00, 50x special 75x75, 5x5, x 75x00, 5x00, x00 85x00, 50x00 special ACCESSORY G01 G0 IMPACT PLATE EARS M6 THREAD POSITION 3 Opp Ports 1 Port Side KIT NUMBER (Continued on next page.) 36

37 GENERAL OPTIONS: ACCESSORIES WIRING SCHEMATICS INSULATING PLATE INSULATING PLATE RAIL CURRENT FLOW RAIL POWER SUPPLY + VDC CURRENT SOURCING APPLICATION INPUT COMMON CURRENT SINKING INPUT MODULE General INSULATING PLATE INSULATING PLATE RAIL CURRENT FLOW RAIL VDC POWER SUPPLY + VDC CURRENT SINKING APPLICATION (with external supply) INPUT + VDC VDC COMMON CURRENT SOURCING INPUT MODULE INSULATING PLATE INSULATING PLATE RAIL CURRENT FLOW RAIL CURRENT SINKING APPLICATION (with internal supply) INPUT VDC COMMON CURRENT SOURCING INPUT MODULE 37

38 GENERAL OPTIONS: ACCESSORIES G07 ALUMINUM JAW (Both Jaws Rotate) This option provides a GRM clamp with hardcoated aluminum jaws that reduce the weight of the clamp by 0.6 lb [0.3 kg]. Both jaws accept all Series GRM standard and accessory tips. Jaw rotations are the same as standard GRM clamps. Consult PHD for additional accessory compatibility. Not available with G01 and G0 options. No-ear impact plates are standard with this option. Available on GRM. GRMTS--5-5 Shown General GRMT S --5DCB-5DDB-LAA -G07 & MODEL xs WEIGHT REDUCER lb kg SPECIFICATIONS LENGTH ADDER in mm TOTAL FORCE at 87 psi [6 bar] lb N JAW PART NUMBER IF ORDERED SEPARATELY JAW PART NUMBER REPLACEMENT KIT NUMBER IF ORDERED SEPARATELY KIT NUMBER Kit includes: 1 Jaw Driver Pin 1 Pivot Pin Slider Bushings 1 O-Ring O-Ring used with 0 Jaws only G07 ALUMINUM JAW (Jaw A Rotates Only) This option provides a GRM clamp with hardcoated aluminum jaws that reduce the weight of the clamp by 0.6 lb [0.3 kg]. Both jaws accept all Series GRM standard and accessory tips. Jaw rotations are the same as standard GRM clamps. Consult PHD for additional accessory compatibility. Not available with G01 and G0 options. No-ear impact plates are standard with this option. Available on GRM. GRMT S --5DCB- 00 DDB-LAA -G07 GRMTS Shown & MODEL xs JAW PART NUMBER IF SPECIFICATIONS ORDERED SEPARATELY WEIGHT REDUCER LENGTH ADDER TOTAL FORCE at 87 psi [6 bar] JAW ROTATION JAW PART NUMBER lb kg in mm lb N , 5, Kit includes: REPLACEMENT KIT NUMBER IF ORDERED SEPARATELY KIT NUMBER Jaw Driver Pin 1 Pivot Pin Slider Bushings 1 O-Ring O-Ring used with 0 Jaws only 38

39 GENERAL OPTIONS: ACCESSORIES G08 or G09 LIFTING JAWS These options provide standard jaws with special cam slots that increase the clamp s ability to pick up heavier loads as the jaws begin to close. Both jaws accept all Series GRM standard and accessory tips. These jaws have shorter locking ramps and require a different tip color code versus material thickness (see chart below). New red tips replace gold tips for panel thickness of mm for this accessory only. G08 jaws (colored gold) open a maximum of 5 and have the greatest lifting ability. G09 jaws (colored silver) open a maximum of 75 with more lifting ability than the standard S jaw style. Available on GRM. GRMT S DCB- 75 DDB-LAA -G08 & OPTIONS GRM-G08 GRM-G09 GRM-B08-G08 GRM-B08-G09 SPECIFICATIONS LIFTING FORCE AT 87 psi [6 bar] lb N JAW PART NUMBERS IF ORDERED SEPARATELY OPTION G08 G09 PART NUMBER G08 SHOWN JAW COMBINATIONS - OR B MATERIAL THICKNESS 0 to 1.5 to.5 to 1.5 mm.5 mm 3.5 mm Color Black Silver Red No tip Blank Blank Blank Single Cone Point SCB SCS SCR Double Cone Point DCB DCS DCR Single Diamond Point SDB SDS SDR Double Diamond Point DDB DDS DDR Single Urethane Pad SUB SUB SUB Double Urethane Pad DUB DUB DUB ROTATION x, 5 x 5 x, 5 x 5, 75 x 75 General G10 FLIP OVER JAW (For Use with Series GRMxS Clamps Only) This option provides jaws that are longer than standard. They are useful when you need to reach over panels with uneven edges or cutouts that occur frequently in flip over applications. Available on GRM. GRMT S --80DCB-80DDB-LAA -G10 MODEL GRMxS-x GRMxS-x-5-5 GRMxS-x-- SPECIFICATIONS UNIT WEIGHT TOTAL FORCE lb kg lb N JAW PART NUMBER IF ORDERED SEPARATELY JAW ROTATION 80, 5, JAW PART NUMBER

40 IMPACT PLATE OPTIONS: ACCESSORIES - Hxx IMPACT PLATE OPTIONS N-STANDARD POSITION H01 3 H0 1 H03 3 H0 1 H05 3 H06 1 H07 3 H08 1 H09 1 H10 1 H11 3 H1 3 H13 Impact Plate H01 to H08 This option provides standard impact plates mounted in nonstandard orientations. H0, H0, H06, and H08 options are not available for GRMxxF, and GRMxxK clamps. Available on GRM and GRM. IMPACT PLATE IN POSITION 3 GRMTS--5DCB-5DDB-LAA -H06 GRM ASSEMBLY H01 H07 H05 H03 IMPACT PLATE IN POSITION 1 H06 IMPACT PLATE SOCKET HEAD CAP SCREW H08 H0 H0 IMPACT PLATE MOUNTING IMPACT PLATE EAR LOCATION ORIENTATION OPTION (POSITION) (POSITION) H01 3 H0 1 H03 3 H0 1 H05 3 H06 1 H07 3 H08 1 REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY IMPACT ACCESSORY PLATE EARS H01-H0 1 H05-H06 0 H07-H08 H01-H0 1 H05-H06 0 H07-H08 Kit includes: Impact Plates 6 Screws KIT NUMBER

41 IMPACT PLATE OPTIONS: ACCESSORIES H09 to H1 CABLE PROTECTION PLATE This option provides a steel cable protector plate for S01 switches. H09 and H10 options are not available for GRMxxF and GRMxxK clamps. Available on GRM. GRMTS--5 blank -5 blank -LAA -H10 -S01 -TA0 -TB05 POSITION 3 GRM ASSEMBLY H1 H11 Impact Plate POSITION 1 PROTECTOR PLATE PART NUMBER IF ORDERED SEPARATELY IMPACT PLATE SOCKET HEAD CAP SCREW H09 H10 PART NUMBER PROTECTOR PLATE MOUNTING PROTECTOR PLATE CORDSET LOCATION OPTION LOCATION (POSITION) (POSITION) H09 1 H10 1 H11 3 H TE: NUMBERS IN CIRCLES INDICATE POSITION (POSITION 1 IS PORT SIDE OF ). H13 IMPACT PLATE OPTION FOR Pxxxx OR Dxxxx This option provides an impact plate mounted below the switch housing of Pxxxx or Dxxxx options. The impact plate protrudes past the face of the switch housing protecting it from damage. No-ear impact plates are standard with this option. The H13 option is not required when ordering the Kxxxx option (impact plates are standard with this option). Available on GRM and GRM. GRMTS--5DCB-5DDB-LAA -H13 -P3D00 H13-P3Dxx Shown REPLACEMENT KIT NUMBER IF ORDERED SEPARATELY KIT NUMBER Kit Includes: 1 Impact Plate 1

42 JAW OPTIONS: ACCESSORIES - JAxx - JBxx JAW OPTIONS - JA0 - Drop jaw clamp JAW OPTIONS - JB01 - Double chisel modified for use with TA05 through TA07 options JB0 - Drop jaw clamp JB03x - Switch mounting jaw clamp for use with Series GRMxM Clamps only JB01 DOUBLE CHISEL ON Jaw This option modifies a chisel jaw to work with the optional tip TA05-TA07 and switch S01. It removes material from the front of the chisel directly in line with the switch sensing area, allowing the jaws to close with no panel gripped and the switch will not sense the jaw tip. Available on GRM. See S01 switch installed option and TA05 through TA07 tip options. TA05 - TA07 S01 JB01 GRMT D --5 blank -00-LAA -JB01 -S01 -TA05 through TA07 JAW PART NUMBER IF ORDERED SEPARATELY ROTATION Jx0 DROP JAW (A on Jaw A, B on Jaw B) This option provides a standard jaw with a special cam slot that reduces jaw opening. Assembled with a normal rotation jaw, it creates a clamp with jaws that open different amounts. Providing reduced opening (30 ) for die clearance on one side and maximum opening (75 ) for panel clearance on the other side. Using the stop reduces rotation of both jaws to x 5 for additional flexibility. All components are standard per the GRM section except the reduced jaw. Available on GRM. JA0 Shown GRMT S DCB- 75 DDB-LAA -JA0 JAW PART NUMBER IF ORDERED SEPARATELY JAW. or

43 JAW OPTIONS: ACCESSORIES JB03x SWITCH MOUNTING JAW (For Use With Series GRMxM Clamps Only) This option provides a lower flat shovel jaw with the ability to mount the S01 switch accessory. It can be ordered with or without a specially designed double cone point tip. This tip is designed in such a way that the S01 switch will not give a false reading when there is no panel between the jaws. Also included is a special impact plate that protects the switch cable as it is routed away from the switch. Available on GRMxM. This accessory does not include the switch. ACCESSORY JB030 JB031 JB03 JB033 DESCRIPTION Switch ready jaw - No tip included Switch ready jaw - Black tip included Switch ready jaw - Silver tip included Switch ready jaw - Gold tip included GRMT M --85 blank -00-LAA -JB031 -S01 GRM GRMTM JB031-S01 Shown KIT/PART DESCRIPTION Jaw Kit - No tip Tip Kit - Black Tip Kit - Silver Tip Kit - Gold Switch Kit - S01 KIT/PART NUMBER MATERIAL THICKNESS mm mm mm Jaw 3

44 MOUNTING OPTIONS: ACCESSORIES - Mxx MOUNTING OPTIONS M01-30 mm spherical mounting bracket M0-30 mm non-spherical mounting bracket M03 - Rigid rear mounting bracket M0 - Rigid rear mounting bracket M07-3 mm spherical mounting bracket M7-1 in spherical mounting bracket (M8 SHCS) M8-5 mm spherical mounting bracket (M8 SHCS) M9-1.5 in spherical mounting bracket (M8 SHCS) M mm spherical mounting bracket (M8 SHCS) M36-30 mm spherical mounting bracket (M8 SHCS) M37-3 mm spherical mounting bracket (M8 SHCS) M01 30 mm spherical mounting bracket This option provides a spherical side mounting bracket for a 30 mm tube. Available on GRM and GRM. Mounting GRM T S--5DCB-5DDB-LAA -M01 Kit includes: Bracket Halves 1 Spherical Ball 3 Screws U.S. PATENT #5,91,513 REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY KIT NUMBER M0 30 mm N-spherical mounting bracket This option provides a non-spherical side mounting bracket for a 30 mm tube. Available on GRM and GRM. GRM T S--5DCB-5DDB-LAA -M0 Kit includes: Bracket Halves 3 Screws REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY KIT NUMBER

45 MOUNTING OPTIONS: ACCESSORIES M03 RIGID REAR mounting bracket This option provides an aluminum rear mounting bracket for a 1.0 inch [5.0 mm] diameter tube internally or a 1.87 inch [7.6 mm] diameter externally. Available on GRM and GRM. GRM T S--5DCB-5DDB-LAA -M03 Kit includes: Rear Mounting Bracket 3 Screws REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY KIT NUMBER M0 RIGID REAR mounting bracket This option provides an aluminum rear mounting bracket for a 1.0 in [5.0 mm] diameter tube internally or a 1.87 in [7.6 mm] diameter externally. Available on GRM and GRM. GRM T S--5DCB-5DDB-LAA -M0 Kit includes: Rear Mounting Bracket 3 Screws Set Screws REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY KIT NUMBER Mounting M07 3 mm SPHERICAL mounting bracket This option provides a spherical side mounting bracket for a 3 mm tube. Available on GRM and GRM. GRM T S--5DCB-5DDB-LAA -M07 U.S. PATENT #5,91,513 Kit includes: Bracket Halves 1 Spherical Ball 3 Screws REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY KIT NUMBER

46 MOUNTING OPTIONS: ACCESSORIES M7 1 in SPHERICAL MOUNTING BRACKET M mm SPHERICAL MOUNTING BRACKET M8 5.0 mm SPHERICAL MOUNTING BRACKET M mm SPHERICAL MOUNTING BRACKET M9 1.5 in SPHERICAL MOUNTING BRACKET M mm SPHERICAL MOUNTING BRACKET These options provide a spherical side-mounting bracket for 1 in, 1.5 in, 5.0 mm, 30.0 mm, 3.0 mm, or 33.3 mm mounting tubes. The mounting bracket uses M8 screws for bracket assembly instead of M6 screws. Available on GRM and GRM. GRM T S--5DCB-5DDB-LAA -M7 GRM STYLE GRM STYLE U.S. PATENT #5,91,513 Mounting Kit includes: Bracket Halves 1 Spherical Ball 3 Screws 3 Washers OPTION CODE M7 M8 M9 M30 M36 M37 GRMxxx SPHERICAL BRACKET KITS WITH M8 SHCS KIT NUMBER GRMxx GRMxx MOUNTING ROD DIAMETER 1.0 in 5.0 mm 1.5 in 33.3 mm 30.0 mm 3.0 mm 6

47 SWITCH OPTIONS: ACCESSORIES - Sxx SWITCH OPTIONS (specific switch) S01 - Turck Bi5-Q08-AP6X-0.5M-RST/S3 S01 SWITCH INSTALLED- TURCK Bi5-Q08-AP6X-0.5M-RST/S3 This option mounts the Turck Q08 switch (Bi5-Q08-AP6X-0.5M-RST/S3) into the special switch mounting tips Tx05, 06, 07, 05, 06, 07, or 055. Available on GRM. GRMTS--5 blank -5 blank -LAA -S01 -Tx05 through Tx07 -Tx0 through Tx0 REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY KIT NUMBER TURCK SWITCH. Bi5-Q08-AP6X-0.5M-RST/S3 EURO PIN CONNECTOR 1 = BN = BK MATCHING CORDSET METERS LONG RK T- Kit includes: 1 Turck Q08 Switch Screws to mount switch Cable Clamps Screws to mount clamps 1 Wire Tie 3 = BU WIRING DIAGRAM BN BU Switch BK LOAD OUTPUT: AP6X SHORT CIRCUIT AND OVERLOAD PROTECTED AND WFI 7

48 SWITCH MOUNTING OPTIONS: ACCESSORIES - SBxx SWITCH MOUNTING OPTIONS - BODY SWITCH COVER SWITCH POSITION EXIT SB05-5 mm threaded switch cover 1 or SB06-5 mm threaded switch cover 3 or SB07-1 mm switch option 3 SB08-1 mm switch option 3 SB11-8 mm switch option 3 SB1-8 mm switch option 3 SB13-5 mm switch option 3 SB1-5 mm switch option 3 SB05 SB06 5 mm THREADED SWITCH COVER - POSITION 1 5 mm THREADED SWITCH COVER - POSITION 3 These options provide jaw open and closed sensing by fixing an aluminum housing to the side of the clamp body, mounting commercially available 5 mm metal sensing switches that sense the drive pin as the clamp opens and closes. The switch location is not adjustable. Available on GRM. SB05 and SB06 are not available with flange units. GRMTS-- 75 DCB-75DDB-LAA -SB05 REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY SB05 Shown For use with customer supplied Turck 5 mm proximity switch Bi1-EG05-AP6X-V1331 or equivalent. KIT NUMBER Kit includes: Housing and all pins and screws required for installation. Switches are not included. Switch Mounting 8 SB07 SB08 SB11 SB1 SB13 SB1 These options provide jaw open and closed sensing or panel present by fixing an aluminum housing to the side of the clamp body, which accommodates 5, 8, or 1 mm switches. The switches sense the position of a target on the drive pin as the clamp opens and closes. The switch locations are adjustable. The switch cover is not available on the port side of the clamp. For use with the following customer supplied Turck proximity switches or equivalent: (shielded switches only) 5 mm = Bi1-EG05-AP6X-V mm = Bi1.5U-EG08-AP6X-H131 1 mm = Bi3U-E-AP6X-H111 Available on GRM. GRMTS--5DCB-5DDB-LAA -SB07 1, 8, or 5 mm SWITCH COVER SWITCH EXIT - POSITION 1, 8, or 5 mm SWITCH COVER SWITCH EXIT - POSITION Kit includes: Housing and all pins and screws required for installation. Switches are not included. REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY Modification to body required if ordering as a kit xf or xk xf or xk xf or xk OPTION SB07 or SB08 SB11 or SB1 SB13 or SB1 SB07 or SB08 SB11 or SB1 SB13 or SB1 SWITCH THREAD 1 mm 8 mm 5 mm 1 mm 8 mm 5 mm SB07 Shown KIT NUMBER

49 SWITCH MOUNTING OPTIONS: ACCESSORIES - Pxxxx SWITCH MOUNTING OPTIONS PxNxx - Panel Present Detection without switch PxAxx - Panel Present Detection with -Pin AC/DC switch PxBxx - Panel Present Detection with 3-Pin AC/DC switch PxCxx - Panel Present Detection with -Pin DC switch PxDxx - Panel Present Detection with -Pin DC switch PxExx - Panel Present Detection with 3-Pin DC switch PxFxx - Panel Present Detection with 3-Wire DC switch PxGxx - Panel Present Detection with 3-Pin AC/DC switch Pxxxx PANEL PRESENT DETECTION Panel present detection is a process where signaling devices detect the presence of a part. The Series GRM Clamp accommodates this option by affixing an adjustable housing and switch to the side of the clamp body. The internal switch senses the position of a target on the drive pin that travels in the housing. The location of the target relates directly to jaw position and the thickness of material being clamped. This option is an excellent choice for panel present detection and will function within a wide range of material thicknesses.07 to.157 in [0.7 to.0 mm]. Steel tips are recommended. For urethane tip applications, refer to Tx068 and Tx069 of the Accessories section. Single cone point to single diamond tips are not recommended for panels.039 in [1.0 mm] and below. Single diamond to single diamond tips are recommended for panels.039 in [1.0 mm] and below. ADJUSTMENT DIRECTION PANEL PRESENT LEVER POSITION P3xxx Shown AVAILABLE ON GRM GRM ACCESSORY P3Nxx Nxx or P3Nxx Nxx or P3Nxx P3Nxx P3xxx xxx or P3xxx xxx or P3xxx P3xxx P3Nxx P3xxx BODY OPTION STD STD B05, B06, B07, B08, B08A, B09 B05, B06, B07, B08, B08A, B09 STD STD B05, B06, B07, B08, B08A, B09 B05, B06, B07, B08, B08A, B09 STD STD JAW OPTION C, D, G, H, J, N, P, R, S, F, K L, M C, D, G, H, J, N, P, R, S F, K C, D, G, H, J, N, P, R, S, F, K L, M C, D, G, H, J, N, P, R, S F, K G, H, J, S, F G, H, J, S, F HOUSING POSITION 3 1 or 3 1 or or 3 1 or Switch Mounting GRMTS--5DCB-5DDB-LAA -P 3 A 10 HOUSING OPTION P - Panel Present PANEL THICKNESS OPTION 00 - No Panel in [0.7 mm] in [1.0 mm] in [.0 mm] SWITCH HOUSING POSITION 1 - Position Position 3 SWITCH OPTION N - No Switch A - -Pin AC/DC Switch B - 3-Pin AC/DC Switch C - -Pin DC Switch D - -Pin DC Switch E - 3-Pin DC Switch F - 3-Wire DC Switch G - 3-Pin AC/DC Switch Switch Option - Refer to page 55 for specifications. Panel Thickness Option - Housing may be preset at the factory for panel thickness in.00 in [0.1 mm] increments. Material Thickness Range -.07 to.157 in [0.7 to.0 mm] x00 and P3x00 options do not require factory setup. For compatibility with other units, consult PHD. 9

50 SWITCH MOUNTING OPTIONS: ACCESSORIES Switch Mounting SWITCH OPTION A B C D E F G REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY xf or xk xl or xm xf ACCESSORY PxN00 PxA00 PxB00 PxC00 PxD00 PxE00 PxF00 PxG00 PxN00 PxA00 PxB00 PxC00 PxD00 PxE00 PxF00 PxG00 PxN00 PxA00 PxB00 PxC00 PxD00 PxE00 PxF00 PxG00 PxN00 PxA00 PxB00 PxC00 PxD00 PxE00 PxF00 PxG00 PxN00 PxA00 PxB00 PxC00 PxD00 PxE00 PxF00 PxG00 KIT NUMBER SWITCH TYPE -PIN AC/DC - N.O. 3-PIN AC/DC - N.O. -PIN DC - N.O. - NPN -PIN DC - N.O. - PNP 3-PIN DC - N.O. - PNP 3-WIRE DC - N.O. - PNP 3-PIN AC/DC - N.O. DESCRIPTION Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Kit includes: Housing and all pins and screws required for installation. REPLACEMENT SWITCH NUMBERS IF ORDERED SEPARATELY PHD SWITCH NUMBER TURCK PART NUMBER Bi -Q10S-AZ31X-0.M-SB T/S1597 Bi -Q10S-AZ31X-0.M-SB 3T Bi -Q10S-AN6X-0.M-RS T Bi -Q10S-AP6X-0.M-RS T Bi -Q10S-AP6X-0.M-PSG 3M Bi -Q10S-AP6X Bi -Q10S-AZ31X-0.M-PSG 3F MATCHING CORDSETS METERS LONG SWITCH OPTION A B C D E F G PHD PART NUMBER CORDSET PART NUMBER KB 3T- RK T- RK T- PKG 3M- PKG 3M- 50

51 SWITCH MOUNTING OPTIONS: ACCESSORIES - Dxxxx SWITCH MOUNTING OPTIONS DxNxx - Double Sheet Detection without switch DxAxx - Double Sheet Detection with -Pin AC/DC switch DxBxx - Double Sheet Detection with 3-Pin AC/DC switch DxCxx - Double Sheet Detection with -Pin DC switch DxDxx - Double Sheet Detection with -Pin DC switch DxExx - Double Sheet Detection with 3-Pin DC switch DxFxx - Double Sheet Detection with 3-Wire DC switch DxGxx - Double Sheet Detection with 3-Pin AC/DC switch Dxxxx DOUBLE SHEET DETECTION Double sheet detection is a process where signaling devices detect the presence of multiple parts. The Series GRM Clamp accommodates this option by affixing an adjustable housing and switch to the side of the clamp body. The internal switch senses the position of a target on the drive pin that travels in the housing. The location of the target relates directly to jaw position and the thickness of material being clamped. This option is an excellent choice for backup or redundant signaling detection and will function within a wide range of material thicknesses.07 to.157 in [0.7 to.0 mm]. Steel tips are recommended. For urethane tip applications, refer to Tx068 and Tx069 of the Accessories section. Single cone point to single diamond tips are not recommended for panels.039 in [1.0 mm] and below. Single diamond to single diamond tips are recommended for panels.039 in [1.0 mm] and below. ADJUSTMENT DIRECTION DOUBLE SHEET LEVER POSITION D3xxx Shown AVAILABLE ON GRM GRM ACCESSORY D3Nxx D1Nxx or D3Nxx D1Nxx or D3Nxx D3Nxx D3xxx D1xxx or D3xxx D1xxx or D3xxx D3xxx D3Nxx D3xxx BODY OPTION STD STD B05, B06, B07, B08, B08A, B09 B05, B06, B07, B08, B08A, B09 STD STD B05, B06, B07, B08, B08A, B09 B05, B06, B07, B08, B08A, B09 STD STD JAW OPTION C, D, G, H, J, N, P, R, S, F, K L, M C, D, G, H, J, N, P, R, S F, K C, D, G, H, J, N, P, R, S, F, K L, M C, D, G, H, J, N, P, R, S F, K G, H, J, S, F G, H, J, S, F HOUSING POSITION 3 1 or 3 1 or or 3 1 or Switch Mounting GRMTS--5DCB-5DDB-LAA -D 3 A 10 HOUSING OPTION D - Double Sheet PANEL THICKNESS OPTION 00 - No Panel in [0.7 mm] in [1.0 mm] in [.0 mm] SWITCH HOUSING POSITION 1 - Position Position 3 SWITCH OPTION N - No Switch A - -Pin AC/DC Switch B - 3-Pin AC/DC Switch C - -Pin DC Switch D - -Pin DC Switch E - 3-Pin DC Switch F - 3-Wire DC Switch G - 3-Pin AC/DC Switch Switch Option - Refer to page 55 for specifications. Panel Thickness Option - Housing may be preset at the factory for panel thickness in.00 in [0.1 mm] increments. Material Thickness Range -.07 to.157 in [0.7 to.0 mm] D1x00 and D3x00 options do not require factory setup. For compatibility with other units, consult PHD. 51

52 SWITCH MOUNTING OPTIONS: ACCESSORIES Switch Mounting REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY xf or xk xl or xm xf ACCESSORY DxN00 DxA00 DxB00 DxC00 DxD00 DxE00 DxF00 DxG00 DxN00 DxA00 DxB00 DxC00 DxD00 DxE00 DxF00 DxG00 DxN00 DxA00 DxB00 DxC00 DxD00 DxE00 DxF00 DxG00 DxN00 DxA00 DxB00 DxC00 DxD00 DxE00 DxF00 DxG00 DxN00 DxA00 DxB00 DxC00 DxD00 DxE00 DxF00 DxG00 KIT NUMBER DESCRIPTION Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Kit includes: Housing and all pins and screws required for installation. SWITCH OPTION A B C D E F G REPLACEMENT SWITCH NUMBERS IF ORDERED SEPARATELY SWITCH TYPE -PIN AC/DC - N.O. 3-PIN AC/DC - N.O. -PIN DC - N.O. - NPN -PIN DC - N.O. - PNP 3-PIN DC - N.O. - PNP 3-WIRE DC - N.O. - PNP 3-PIN AC/DC - N.O. PHD SWITCH NUMBER TURCK PART NUMBER Bi -Q10S-AZ31X-0.M-SB T/S1597 Bi -Q10S-AZ31X-0.M-SB 3T Bi -Q10S-AN6X-0.M-RS T Bi -Q10S-AP6X-0.M-RS T Bi -Q10S-AP6X-0.M-PSG 3M Bi -Q10S-AP6X Bi -Q10S-AZ31X-0.M-PSG 3F TARGET - SOLD WITH KIT ASSEMBLY TE: Notch in target to face switch. MATCHING CORDSETS METERS LONG SWITCH OPTION A B C D E F G PHD PART NUMBER CORDSET PART NUMBER KB 3T- RK T- RK T- PKG 3M- PKG 3M- 5

53 SWITCH MOUNTING OPTIONS: ACCESSORIES - Kxxxx SWITCH MOUNTING OPTIONS KxNxx - Panel Present and Double Sheet Detection without switch KxAxx - Panel Present and Double Sheet Detection with -Pin AC/DC switch KxBxx - Panel Present and Double Sheet Detection with 3-Pin AC/DC switch KxCxx - Panel Present and Double Sheet Detection with -Pin DC switch KxDxx - Panel Present and Double Sheet Detection with -Pin DC switch KxExx - Panel Present and Double Sheet Detection with 3-Pin DC switch KxFxx - Panel Present and Double Sheet Detection with 3-Wire DC switch KxGxx - Panel Present and Double Sheet Detection with 3-Pin AC/DC switch Kxxxx PANEL PRESENT AND DOUBLE SHEET DETECTION This option provides panel present and double sheet detection on one Series GRM clamp. This is accomplished by affixing two adjustable housings and switches to the sides of the clamp body. The internal switches sense the position of the targets on the drive pin that travels in the housings. The location of the targets relates directly to jaw position and the thickness of the material being clamped. This option is an excellent choice for panel present detection and backup or redundant signaling detection. This option will also function within a wide range of material thicknesses.07 to.157 in [0.7 to.0 mm]. Steel tips are recommended. For urethane tip applications, refer to Tx068 and Tx069 of the Accessories section. Single cone point to single diamond tips are not recommended for panels.039 in [1.0 mm] and below. Single diamond to single diamond tips are recommended for panels.039 in [1.0 mm] and below. -B06-K3xxx Shown Specific body options are required for this option. See the chart below for available bodies. AVAILABLE ON GRM ACCESSORY K1Nxx or K3Nxx K1xxx or K3xxx K1Nxx or K3Nxx K1xxx or K3xxx BODY OPTION B05, B06, B07, B08, B08A, B09 B05, B06, B07, B08, B08A, B09 STD STD GRMTS--5DCB-5DDB-LAA-B06 -K 3 A 10 HOUSING OPTION K - Panel Present and Double Sheet JAW OPTION C, D, G, H, J, N, P, R, S C, D, G, H, J, N, P, R, S L, M L, M PANEL THICKNESS OPTION 00 - No Panel in [0.7 mm] in [1.0 mm] in [.0 mm] PANEL PRESENT SWITCH HOUSING POSITION 1 - Position Position 3 HOUSING POSITION 1 and 3 1 and 3 1 and 3 1 and 3 SWITCH OPTION N - No Switch A - -Pin AC/DC Switch B - 3-Pin AC/DC Switch C - -Pin DC Switch D - -Pin DC Switch E - 3-Pin DC Switch F - 3-Wire DC Switch G - 3-Pin AC/DC Switch Switch Mounting Switch Option - Refer to page 55 for specifications. Panel Thickness Option - Housings may be preset at the factory for panel thickness in.00 in [0.1 mm] increments. Material Thickness Range -.07 to.157 in [0.7 to.0 mm] K1x00 and K3x00 options do not require factory setup. For compatibility with other units, consult PHD. 53

54 SWITCH MOUNTING OPTIONS: ACCESSORIES REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY xl or xm ACCESSORY KxN00 KxA00 KxB00 KxC00 KxD00 KxE00 KxF00 KxG00 KxN00 KxA00 KxB00 KxC00 KxD00 KxE00 KxF00 KxG00 KIT NUMBER DESCRIPTION Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Housing w/o switch kit Housing w/-pin AC/DC switch kit Housing w/3-pin AC/DC switch kit Housing w/-pin DC switch kit Housing w/-pin DC switch kit Housing w/3-pin DC switch kit Housing w/3-wire DC switch kit Housing w/3-pin AC/DC switch kit Kit includes: Housing and all pins and screws required for installation. SWITCH OPTION A B C D E F G REPLACEMENT SWITCH NUMBERS IF ORDERED SEPARATELY SWITCH TYPE -PIN AC/DC - N.O. 3-PIN AC/DC - N.O. -PIN DC - N.O. - NPN -PIN DC - N.O. - PNP 3-PIN DC - N.O. - PNP 3-WIRE DC - N.O. - PNP 3-PIN AC/DC - N.O. PHD SWITCH NUMBER TURCK PART NUMBER Bi -Q10S-AZ31X-0.M-SB T/S1597 Bi -Q10S-AZ31X-0.M-SB 3T Bi -Q10S-AN6X-0.M-RS T Bi -Q10S-AP6X-0.M-RS T Bi -Q10S-AP6X-0.M-PSG 3M Bi -Q10S-AP6X Bi -Q10S-AZ31X-0.M-PSG 3F Switch Mounting MATCHING CORDSETS METERS LONG SWITCH OPTION A B C D E F G PHD PART NUMBER CORDSET PART NUMBER KB 3T- RK T- RK T- PKG 3M- PKG 3M- 5

55 SWITCH MOUNTING OPTIONS: ACCESSORIES FOR Pxxxx PANEL PRESENT DETECTION Dxxxx DOUBLE SHEET DETECTION Kxxxx PANEL PRESENT & DOUBLE SHEET DETECTION SWITCH OPTION A 7.87 [0. m] [39.0] BU LOAD 1/-0 UNF MICROFAST CONNECTOR Bi -Q10S-AZ31X-0.M-SB T/S BN L1 L WARNING: SHORT-CIRCUIT PROTECTION. ALWAYS WIRE A LOAD IN SERIES WITH THE SENSOR SWITCH OPTION B 7.87 [0. m] [39.0] RD/WH 3 RD/BK L1 LOAD 1 1/-0 UNF MICROFAST CONNECTOR Bi -Q10S-AZ31X-0.M-SB 3T L GN WARNING: SHORT-CIRCUIT PROTECTION. ALWAYS WIRE A LOAD IN SERIES WITH THE SENSOR SWITCH OPTION C 7.87 [0. m] [0.0] BU 1 BK LOAD x 1 EUROFAST CONNECTOR Bi -Q10S-AN6X-0.M-RS T 3 BN SHORT CIRCUIT AND OVERLOAD PROTECTION SWITCH OPTION D 7.87 [0. m] [0.0] BN 1 BK LOAD x 1 EUROFAST CONNECTOR Bi -Q10S-AP6X-0.M-RS T 3 BU SHORT CIRCUIT AND OVERLOAD PROTECTION SWITCH OPTION E 7.87 [0. m] 1.6 [1.] M8 x 1 PICOFAST CONNECTOR 3 1 BK BU BN LOAD Switch Mounting Bi -Q10S-AP6X-0.M-PSG 3M SHORT CIRCUIT AND OVERLOAD PROTECTION SWITCH OPTION F BN BN BU BK BU Bi -Q10S-AP6X BK LOAD SHORT CIRCUIT AND OVERLOAD PROTECTION SWITCH OPTION G 7.87 [0. m] 1.6 [1.] M8 x 1 PICOFAST CONNECTOR GN 1 3 BU BN LOAD L L1 Bi -Q10S-AZ31X-0.M-PSG 3F WARNING: SHORT-CIRCUIT PROTECTION. ALWAYS WIRE A LOAD IN SERIES WITH THE SENSOR 55

56 SWITCH MOUNTING OPTIONS: ACCESSORIES - PS(R)xxx SWITCH MOUNTING OPTIONS PS(R)xNx - Positional Sensing Detection without switch PS(R)xAx - Positional Sensing Detection with 5-Pin AC/DC switch (Turck) PS(R)xDx - Positional Sensing Detection with -Pin PNP DC switch (P + F) PS(R)xEx - Positional Sensing Detection with -Pin PNP DC switch (Turck) PS(R)xFx - Positional Sensing Detection with -Pin PNP DC switch (Efector) PS(R)xHx - Positional Sensing Detection with -Pin NPN DC switch (P + F) PS(R)xJx - Positional Sensing Detection with -Pin NPN DC switch (Turck) PS(R)xxx POSITIONAL SENSING DETECTION This option provides jaw open and jaw closed sensing by affixing an aluminum housing to the side of the clamp body. The adjustable switches sense the position of a target on the drive pin as the clamp opens and closes. PS positions satellite switch S0 to sense open and S01 to sense close. PR positions satellite switch S01 to sense open and S0 to sense close. See tables on switch option page for satellite switch to quick disconnect pin number relationships. For use with the following PHD or customer supplied switches or equivalent: Ni -Q6.5-ADZ FSB 5.X/S30 (Turck) NBN-F S6-E8-V1 (P + F) Ni -Q BDS-AP6X3-H111/S3 (Turck) IN 5375 (Efector) NBN-F S6-E10-V1 (P + F) Ni -Q6.5-AN FS.X3/S30 (Turck) PS3D9 Shown Switch Mounting AVAILABLE ON GRM GRM ACCESSORY PS(R)3Nx PS(R)xNx PS(R)3Nx PS(R)3A1 PS(R)xA1 PS(R)3A1 PS(R)3Dx, PS(R)3Ex, PS(R)3Fx PS(R)xDx, PS(R)xEx, PS(R)xFx PS(R)3Dx, PS(R)3Ex, PS(R)3Fx PS(R)3Hx PS(R)xHx PS(R)3Hx PS(R)3Jx PS(R)xJx PS(R)3Jx PS(R)3Nx PS(R)3A1 PS(R)3Dx PS(R)3Ex PS(R)3Fx PS(R)3Hx PS(R)3Jx BODY OPTION STD B05, B06, B07, B08, B08A, B09 B05, B06, B07, B08, B08A, B09 STD B05, B06, B07, B08, B08A, B09 B05, B06, B07, B08, B08A, B09 STD B05, B06, B07, B08, B08A, B09 B05, B06, B07, B08, B08A, B09 STD B05, B06, B07, B08, B08A, B09 B05, B06, B07, B08, B08A, B09 STD B05, B06, B07, B08, B08A, B09 B05, B06, B07, B08, B08A, B09 STD STD STD STD STD STD STD GRMTS--5DCB-5DDB-LAA -P S 3 D 9 HOUSING OPTION P - Positional Sensing SENSING OPTION S - Standard R - Reversed JAW OPTION C, D, G, H, J, N, P, R, S, F, K C, D, G, H, J, N, P, R, S F, K C, D, G, H, J, N, P, R, S, F, K C, D, G, H, J, N, P, R, S F, K C, D, G, H, J, N, P, R, S, F, K C, D, G, H, J, N, P, R, S F, K C, D, G, H, J, N, P, R, S, F, K C, D, G, H, J, N, P, R, S F, K C, D, G, H, J, N, P, R, S, F, K C, D, G, H, J, N, P, R, S F, K, G, H, J, S, F G, H, J, S, F G, H, J, S, F G, H, J, S, F G, H, J, S, F G, H, J, S, F G, H, J, S, F CONNECTOR POSITION 1 - Parallel to bore 9 - Perpendicular to bore SWITCH HOUSING POSITION 1 - Position Position 3 HOUSING POSITION 3 1 or or or or or SWITCH OPTION N - No Switch A - 5-pin AC/DC Switch (Turck) D - -pin PNP DC Switch (P+F) E - -pin PNP DC Switch (Turck) F - -pin PNP DC Switch (Efector) H - -pin NPN DC Switch (P + F) J - -pin NPN DC Switch (Turck) Switch Option-Refer to page 58 for specifications. Connector Position- -PS(R)xA1, -PS(R)xD1, -PS(R)xE1, -PS(R)xF1, -PS(R)xH1, and -PS(R)xJ1 options not recommended for use with C mounts. Connector position 1 will limit rotation about the clamp body for the following mounts: R, S, and W. 56

57 SWITCH MOUNTING OPTIONS: ACCESSORIES xf or xk xf xg SWITCH OPTION A D E F H J REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY ACCESSORY PS(R)xNx PS(R)xA1 PS(R)xDx PS(R)xEx PS(R)xFx PS(R)xHx PS(R)xJx PS(R)xNx PS(R)xA1 PS(R)xDx PS(R)xEx PS(R)xFx PS(R)xHx PS(R)xJx PS(R)xNx PS(R)xA1 PS(R)xDx PS(R)xEx PS(R)xFx PS(R)xHx PS(R)xJx PS(R)xNx PS(R)xA1 PS(R)xDx PS(R)xEx PS(R)xFx PS(R)xHx PS(R)xJx PS(R)xNx PS(R)xA1 PS(R)xDx PS(R)xEx PS(R)xFx PS(R)xHx PS(R)xJx KIT NUMBER REPLACEMENT SWITCH KIT NUMBERS IF ORDERED SEPARATELY SWITCH TYPE 5-PIN AC/DC-N.O. -PIN DC - N.O. - PNP -PIN DC - N.O. - PNP -PIN DC - N.O. - PNP -PIN DC - N.O. - NPN -PIN DC - N.O. - NPN DESCRIPTION Housing w/o switch kit Housing w/5-pin AC/DC (Turck) switch kit Housing w/-pin DC (P+F) switch kit Housing w/-pin DC (Turck) switch kit Housing w/-pin DC (Efector) switch kit Housing w/-pin DC (P+F) switch kit Housing w/-pin DC (Turck) switch kit Housing w/o switch kit Housing w/5-pin AC/DC (Turck) switch kit Housing w/-pin DC (P+F) switch kit Housing w/-pin DC (Turck) switch kit Housing w/-pin DC (Efector) switch kit Housing w/-pin DC (P+F) switch kit Housing w/-pin DC (Turck) switch kit Housing w/o switch kit Housing w/5-pin AC/DC (Turck) switch kit Housing w/-pin DC (P+F) switch kit Housing w/-pin DC (Turck) switch kit Housing w/-pin DC (Efector) switch kit Housing w/-pin DC (P+F) switch kit Housing w/-pin DC (Turck) switch kit Housing w/o switch kit Housing w/5-pin AC/DC (Turck) switch kit Housing w/-pin DC (P+F) switch kit Housing w/-pin DC (Turck) switch kit Housing w/-pin DC (Efector) switch kit Housing w/-pin DC (P+F) switch kit Housing w/-pin DC (Turck) switch kit Housing w/o switch kit Housing w/5-pin AC/DC (Turck) switch kit Housing w/-pin DC (P+F) switch kit Housing w/-pin DC (Turck) switch kit Housing w/-pin DC (Efector) switch kit Housing w/-pin DC (P+F) switch kit Housing w/-pin DC (Turck) switch kit Kit includes: Housing and all pins and screws required for installation. PHD SWITCH KIT NUMBER SWITCH PART NUMBER Ni -Q6.5-ADZ FSB 5.X/S30 NBN-F S6-E8-V1 Ni -Q BDS-AP6X3-H111/S3 IN 5375 NBN-F S6-E10-V1 Ni--Q6.5-AN FS.X3/S30 Switch Mounting MATCHING CORDSETS METERS LONG SWITCH OPTION A D E F H J PHD PART NUMBER CORDSET PART NUMBER KB 5T- V1-G-YEM-PVC RK.T- V1-G-YEM-PVC V1-G-YEM-PVC RK.T- 57

58 SWITCH MOUNTING OPTIONS: ACCESSORIES FOR PS(R)xxxx POSITIONAL SENSING DETECTION SWITCH OPTION A Turck Part #: Ni -Q6.5-ADZ FSB 5.X/S [3.0] LEDs GREEN: POWER YELLOW: OUTPUT STATUS (S01) RED: OUTPUT STATUS (S0) SO1 SO.95 [3.5] [7.0] THRU HOLE FOR M5 x 0.8 SHCS.157 [.0] HEX.709 [18.0] 1/-0 UNF OPTION CODE PSxA1 PRxA1 L1 L1 SATELLITE UNED S0 S01 RD/WH RD ED S01 S0 GN -WIRE AC/DC RD/BK QUICK DISCONNECT PIN NUMBER S01 = PIN 5 S0 = PIN SENSOR S01 LOAD 1 L RD/YE LOAD L SENSOR S0 SWITCH OPTION D P + F Part #: NBN-F S6-E8-V1 (PNP) SWITCH OPTION H P + F Part #: NBN-F S6-E10-V1 (NPN) CONNECTOR POSITION 1 90 CONNECTOR POSITION [18.0] LEDs GREEN: POWER YELLOW: OUTPUT STATUS (S1) RED: OUTPUT STATUS (S).95 [3.5] [7.0] THRU HOLE FOR M5 x 0.8 SHCS.157 [.0] HEX.709 [18.0] x 1 OPTION CODE PSxxx PRxxx SATELLITE UNED S S1 -WIRE DC (V1 TYPE) NPN DUAL RMALLY OPEN BN SENSOR S1 1 BK LOAD 3 BU WH LOAD SENSOR S ED S1 S QUICK DISCONNECT PIN NUMBER S1 = PIN S = PIN -WIRE DC (V1 TYPE) PNP DUAL RMALLY OPEN BN SENSOR S1 1 BK LOAD 1 3 BU WH LOAD SENSOR S SWITCH OPTION E Turck Part #: Ni -Q BDS-AP6X3-H111/S3 (PNP) SWITCH OPTION J Turck Part #: Ni--Q6.5-AN FS.X3/S30 (NPN) 90 CONNECTOR POSITION [7.0] OPTION CODE PSxxx PRxxx SATELLITE UNED S0 S01 ED S01 S0 QUICK DISCONNECT PIN NUMBER S01 = PIN S0 = PIN Switch Mounting CONNECTOR POSITION [18.0] THRU HOLE FOR M5 x 0.8 SHCS.157 [.0] HEX -WIRE DC (V1 TYPE) NPN DUAL RMALLY OPEN BN -WIRE DC PNP DUAL RMALLY OPEN BN LEDs GREEN: POWER YELLOW: OUTPUT STATUS (S01) RED: OUTPUT STATUS (S0).95 [3.5].713 [18.1] x 1 SENSOR S01 1 BK LOAD 3 BU WH LOAD SENSOR S0 SENSOR S01 1 BK LOAD 1 3 BU WH LOAD SENSOR S0 SWITCH OPTION F Efector Part #: IN 5375 (PNP) CONNECTOR POSITION 1 90 CONNECTOR POSITION [18.0] LEDs GREEN: POWER YELLOW: OUTPUT STATUS (S1) RED: OUTPUT STATUS (S).95 [3.5] [7.0] THRU HOLE FOR M5 x 0.8 SHCS.157 [.0] HEX.709 [18.0] x 1 OPTION CODE PSxFx PRxFx SATELLITE UNED S S1 ED S1 S QUICK DISCONNECT PIN NUMBER S1 = PIN S = PIN -WIRE DC PNP DUAL RMALLY OPEN BN SENSOR S1 1 BK LOAD 1 3 BU WH LOAD SENSOR S 58

59 OPTIONS: ACCESSORIES - TAxxx - TBxxx OPTIONS - CODE COLOR USE WITH OPTION: TA001* - 30 single diamond black TB001 TA00* - 30 single diamond silver TB00 TA003**- 30 single diamond black TB003 TA00**- 30 single diamond silver TB00 TA005 - Single socket black See Tx TA006 - Single socket silver " TA007 - Single socket gold " TA008 - Single ball black " TA009 - Single ball silver " TA010 - Single ball gold " TA017 - Tip extension (duckbill) TB017 TA018 - Tip extension (wing tip) TB018 TA019 - Sharp cone point black See Tx TA00 - Sharp cone point silver " TA01 - Sharp cone point gold " TA0 - Double cone point black See Tx0-07 TA03 - Double cone point silver " TA0 - Double cone point gold " TA05 - Double diamond point black " TA06 - Double diamond point silver " TA07 - Double diamond point gold " TA030 - Short offset TB031-TB033 TA031 - Long offset black TB030 TA03 - Long offset silver TB030 TA033 - Long offset gold TB030 TA03* - 30 Double diamond black TB03 TA035* - 30 Double diamond silver TB035 TA036* - 30 Double diamond gold TB036 TA037**- 30 Double diamond black TB037 TA038**- 30 Double diamond silver TB038 TA039**- 30 Double diamond gold TB039 TA00 - Hard urethane red TB00 TA01 - Hard urethane red TB01 TA0 - Double no scratch black See Tx0-07 TA03 - Double no scratch silver " TA0 - Double no scratch gold " TA05 - Double no scratch black " TA06 - Double no scratch silver " TA07 - Double no scratch gold " TA05 - Double urethane yellow TB055 TA055 - Double urethane yellow TB05 TA060 - Drawbead black TB030 TA061 - Drawbead silver TB030 TA063 - Sharp double cone point black See Tx TA06 - Sharp double cone point silver " TA065 - Sharp double cone point gold " TA066 - Hard urethane blue See Tx TA067 - Hard urethane blue " TA068 - Hard urethane blue " TA069 - Hard urethane yellow " TA single diamond black See Tx TA07-15 single diamond silver " TA single diamond gold " TA07-15 single diamond black " TA single diamond silver " TA single diamond gold " TA double diamond black " TA double diamond silver " TA double diamond gold " TA double diamond black " TA double diamond silver " TA08-15 double diamond gold " TA083 - Drawbead black See Tx TA08 - Drawbead black " OPTIONS - CODE COLOR USE WITH OPTION: TB001* - 30 single diamond black TA001 TB00* - 30 single diamond silver TA00 TB003**- 30 single diamond black TA003 TB00**- 30 single diamond silver TA00 TB005 - Single socket black See Tx TB006 - Single socket silver " TB007 - Single socket gold " TB008 - Single ball black " TB009 - Single ball silver " TB010 - Single ball gold " TB017 - Tip extension (duckbill) TA017 TB018 - Tip extension (wing tip) TA018 TB019 - Sharp cone point black See Tx TB00 - Sharp cone point silver " TB01 - Sharp cone point gold " TB0 - Double cone point black See Tx0-07 TB03 - Double cone point silver " TB0 - Double cone point gold " TB05 - Double diamond point black " TB06 - Double diamond point silver " TB07 - Double diamond point gold " TB030 - Short offset TA031-TA033 TB031 - Long offset black TA030 TB03 - Long offset silver TA030 TB033 - Long offset gold TA030 TB03* - 30 Double diamond black TA03 TB035* - 30 Double diamond silver TA035 TB036* - 30 Double diamond gold TA036 TB037**- 30 Double diamond black TA037 TB038**- 30 Double diamond silver TA038 TB039**- 30 Double diamond gold TA039 TB00 - Hard urethane red TA00 TB01 - Hard urethane red TA01 TB0 - Double no scratch black See Tx0-07 TB03 - Double no scratch silver " TB0 - Double no scratch gold " TB05 - Double no scratch black " TB06 - Double no scratch silver " TB07 - Double no scratch gold " TB05 - Double urethane yellow TA055 TB055 - Double urethane yellow TA05 TB060 - Drawbead black TA030 TB061 - Drawbead silver TA030 TB063 - Sharp double cone point black See Tx TB06 - Sharp double cone point silver " TB065 - Sharp double cone point gold " TB066 - Hard urethane blue See Tx TB067 - Hard urethane blue " TB068 - Hard urethane blue " TB069 - Hard urethane yellow " TB single diamond black See Tx TB07-15 single diamond silver " TB single diamond gold " TB07-15 single diamond black " TB single diamond silver " TB single diamond gold " TB double diamond black " TB double diamond silver " TB double diamond gold " TB double diamond black " TB double diamond silver " TB08-15 double diamond gold " TB083 - Drawbead black See Tx TB08 - Drawbead black " Tip * upward mounting ** downward mounting * upward mounting ** downward mounting 59

60 OPTIONS: ACCESSORIES Tx001 to Tx00 30 SINGLE DIAMOND (A on Jaw A, B on Jaw B) This option provides single diamond tips with the gripping surface on a 30 angle. The tips can be used to grip angled surfaces while keeping the clamp parallel, decreasing the space required by the clamp. These tips are a set and must be used as a pair. Tx001 to Tx00 accessories are only available for GRMxK, GRMxR, and GRMxS clamps. Tx003 to Tx00 (downward mounting) are not available for GRMxF clamps. For other GRMxF applications, consult PHD. Available on GRM. GRM TS--5 blank -5 blank -LAA -TA001 -TB001 REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY KIT NUMBER COLOR black silver Kit includes: 1 30 Single Diamond Tip 1 Mounting Screw OPTION TA001/TB001 TA00/TB00 TA003/TB003 TA00/TB00 FOR K, R, AND S JAW STYLES ONLY MATERIAL THICKNESS (mm) COLOR black silver black silver MOUNTING ORIENTATION upward upward downward downward Assembling the tips rotated 180 turns upward mounting into downward mounting. UPWARD MOUNTING DOWNWARD MOUNTING 30 PART 30 PART Tip 60

61 OPTIONS: ACCESSORIES Tx005 to Tx010 SCRATCH S (A on Jaw A, B on Jaw B) No scratch tips reduce the fines or flakes generated when transferring galvanized panels. The tips have smooth curved surfaces that grip the panels, but don t scratch the plating, therefore eliminating most fines that cause dirty dies and marked panels. These tips are a set. The ball tip needs to be matched to a socket tip. Both the ball and socket need to be specified based on the material thickness. AVAILABLE ON GRM GRM ACCESSORY TA or TB005, 6, or 7 TA or TB008, 9, or 10 TA or TB005, 6, or 7 TA or TB008, 9, or 10 A tip must be specified for jaw A and jaw B. GRMTS--5 blank -5 blank -LAA -TA008 -TB005 RECOMMENDED COMBINATIONS STANDARD JAW STYLE JAW TYPE A ball B socket or CODE TA TB MATERIAL THICKNESS (mm) 0 to 1.51 to 3.01 to xf FLANGE JAW STYLE JAW TYPE A ball B socket CODE TA TB 0 to MATERIAL THICKNESS (mm).86 to to to to to xr SHORT JAW STYLE JAW TYPE A ball B socket CODE TA TB MATERIAL THICKNESS (mm) 0 to 1.51 to BALL SOCKET 13 mm HEX Tip CODE TA OR TB KIT NUMBERS Kit includes: 1 Tip 61

62 OPTIONS: ACCESSORIES Tx017 DUCKBILL EXTENSION (A on Jaw A, B on Jaw B) The Duckbill provides a tip mounting beam that reaches forward to clamp parts in small confined areas. The Duckbill itself mounts to standard jaws, providing a long beam with multiple tip mounting threads in front of the jaw. Standard tips can be attached to these threads. Tips should be specified normally (black, silver, and gold) for the material thickness on that jaw style. Tips will be mounted on outboard threads as shown. Available on GRM. A Duckbill must be specified on jaw A and jaw B. GRMT S --5 SDB -5 SDB -LAA -TA017 -TB017 REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY KIT NUMBER Kit includes: 1 Duckbill 1 Mounting Screw Tx018 WING EXTENSION (A on Jaw A, B on Jaw B) The wing tip provides a tip mounting beam that reaches sideways, providing a long beam with multiple tip mounting threads on both sides of the clamp. Spreading the tips out, causing less deflection in thin panels, standard tips can be attached at these threads. Tips should be specified normally (black, silver, or gold) for the material thickness on that jaw style. Tips should be ordered separately as kits. Available on GRM and GRM. A wing tip must be specified on jaw A and jaw B. Tip GRMT S --5 blank -5 blank -LAA -TA018 -TB018 REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY If ordering as a kit, modification to impact plates may be required KIT NUMBER Kit includes: 1 Wing Tip 1 Mounting Screw 1 Impact Plate modification print IMPACT PLATE REPLACEMENT KIT THAT REQUIRES MODIFICATION KIT NUMBER Kit includes: Impact Plates 6 Screws 6

63 OPTIONS: ACCESSORIES Tx019 to Tx01 SHARP CONE POINT (A on Jaw A, B on Jaw B) Sharp cone points have a tip that is very sharp (less than.015 in [0. mm]). They should be used with a single diamond tip (SDB, SDS, SDG, or SDR) mounted opposite them or a single chisel (C). Tips should be specified (black, silver, gold, or red) for the material thickness and jaw style. Sharp cones can be used on jaw A or jaw B. Available on GRM and GRM. GRMTS--5 blank -5 SDB -LAA -TA019 RECOMMENDED COMBINATIONS STANDARD JAW STYLE or JAW A B CODE TA SDx 0 to SDB MATERIAL THICKNESS (mm) 1.51 to SDS 3.01 to SDG.01 to SDR FLANGE JAW STYLE xf JAW A B CODE TA SDx 0 to SDB.86 to SDB MATERIAL THICKNESS (mm) 1.1 to SDB 1.53 to SDS 1.95 to.9 01 SDS.30 to SDG.61 to SDR SHORT JAW STYLE xr JAW A B CODE TA SDx MATERIAL THICKNESS (mm) 0 to SDB 1.51 to SDS 3.01 to SDR For simplicity, these tables show the sharp cone on jaw A. REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY Kit includes: 1 Tip CODE TA OR TB KIT S. AND PRICES Tip 63

64 OPTIONS: ACCESSORIES Tx0 to Tx07 This option provides panel sensing with a diamond tip that mounts and protects a proximity switch (S01) in a very small tip package. A special matching cone point tip (Tx0-0) is required. Both diamond and cone point tips mount on standard and flange style jaws, creating a very flexible sensing package. Both the cone point and diamond tip need to be specified based on jaw style and material thickness. Available on GRM. A tip must be specified for jaw A and jaw B. DOUBLE CONE AND DIAMOND FOR MOUNTING FLAT PROXIMITY SWITCH (A ON, B ON ) DOUBLE CONE Tx0-0 GRMTS--5 blank -5 blank -LAA -S01 -TA0 -TB05 DOUBLE DIAMOND Tx05 - Tx07 FLANGE JAW STYLE JAW TYPE A cone B diamond RECOMMENDED COMBINATIONS CODE TA TB 0 to MATERIAL THICKNESS (mm).86 to to to to to GRMTF S01-TA0-TB05 RECOMMENDED COMBINATIONS CHISEL JAW STYLE JAW TYPE A diamond CODE TA MATERIAL THICKNESS (mm) 0 to to to GRMTD JB01-S01-TA05 TE: JB01 REQUIRED FOR CHISEL JAW Tip RECOMMENDED COMBINATIONS STANDARD & SHORT JAW STYLES JAW TYPE CODE xr A A cone cone TA TA B B diamond diamond TB TB MATERIAL THICKNESS (mm) 0 to to to GRMTS S01-TA0-TB05 or GRMTS S01-TA0-TB05 OPTION Tx0 Tx03 Tx0 Tx05 Tx06 Tx07 COLOR black silver gold black silver gold KIT Kit includes: 1 Tip 1 Mounting Screw Kit includes: 1 Tip 1 Mounting Screw and Washer 6

65 OPTIONS: ACCESSORIES Tx030 to Tx033 SHORT & LONG OFFSET (A ON, B ON ) Offset tips are double diamonds with the gripping surface shifted off the centerline providing more clearance to clamp panels with flanges up to 1.15 in [8.5 mm] long. These tips are a set and must be used as a pair. The short tip -030 is used for all material thicknesses. The long tip, -031, -03, or 033 is specified based on the material thickness. Tx030 to Tx033 accessories are only available for GRMxK and GRMxS. Tx030 to Tx03 are only available for GRMxR clamps. Available on GRM. A tip must be specified for jaw A and jaw B. TA03 GRMT S --5 blank -5 blank -LAA -TA031 -TB030 TB030 PART xr KIT NUMBER TYPE long long long long long CODE TA or TB031 TA or TB03 TA or TB033 TA or TB031 TA or TB03 Kit includes: 1 Short Tip -Tx030 1 Long Tip specified -Tx031 through Tx033 Mounting Screws 1 Washer MATERIAL THICKNESS (mm) COLOR black silver gold black silver Tip 65

66 OPTIONS: ACCESSORIES Tx03 to Tx DOUBLE DIAMOND (A ON, B ON ) This option provides double diamond tips with the gripping surface on a 30 angle. The tips can be used to grip angled surfaces while keeping the clamp parallel, decreasing the space required by the clamp. These tips are a set and must be used as a pair. Tx03 to Tx039 accessories are only available for GRMxK and GRMxS clamps. Tx03, Tx035, Tx037, and Tx038 are only available for GRMxR clamps. Tx037 to Tx039 (downward mounting) are not available for GRMxF clamps. For other GRMxF applications, consult PHD. Available on GRM. GRM TS--5 blank -5 blank -LAA -TA03 -TB03 OPTION TA03/TB03 TA035/TB035 TA036/TB036 TA037/TB037 TA038/TB038 TA039/TB039 FOR K AND S JAW STYLES MATERIAL THICKNESS (mm) COLOR black silver gold black silver gold MOUNTING ORIENTATION upward upward upward downward downward downward OPTION TA03/TB03 TA035/TB035 TA037/TB037 FOR R JAW STYLE MATERIAL THICKNESS (mm) COLOR black silver black MOUNTING ORIENTATION upward upward downward TA038/TB silver downward Assembling the tips rotated 180 turns upward mounting into downward mounting. REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY KIT NUMBER COLOR black silver gold Kit includes: 1 30 Double Diamond Tip 1 Mounting Screw UPWARD MOUNTING 30 PART DOWNWARD MOUNTING 30 PART Tip 66

67 OPTIONS: ACCESSORIES Tx00 to Tx01 Tx066 to Tx069 HARD URETHANE S (A ON, B ON ) This option provides harder urethane tips. They are made from 93 Durometer Shore A colored red and 85 Durometer Shore A colored blue or yellow for easy identification. These tips provide greater resistance to panel slippage and more resistance to wear than our standard 75 Durometer black tips (DUB or SUB). All dimensions and mounting hardware are identical to the standard urethane tips. These tips accommodate 0 to 3.0 mm material thickness on all jaw styles, except on flange jaws. SINGLE Tx00 (Red) Tx066 (Blue) DOUBLE Tx01 (Red) Tx067 (Blue) ROUNDED Tx068 (Blue) Tx069 (Yellow) AVAILABLE ON GRM GRM GRM GRM GRM ACCESSORY TA00 or TB00 TA066 or TB066 TA00 or TB00 TA01 or TB01 TA067 or TB067 TA01 or TB01 TA068 or TB068 TA069 or TB069 A tip must be specified for jaw A and jaw B. GRMTS--5 blank -5 blank -LAA -TA01 -TB01 RECOMMENDED COMBINATION When Used With Panel Present Or Double Sheet ACCESSORY CODE Tx00, Tx01, Tx066, Tx067, Tx068 Tx069 KIT NUMBERS IF ORDERED SEPARATELY OPTION Tx00 Tx00 Tx01 Tx01 Tx066 Tx067 Tx068 Tx069 STYLE single single double double single double rounded rounded Kit includes: 1 Hard Urethane Tip 1 Mounting Screw GRMxS MATERIAL THICKNESS (mm) GRMxC GRMxD GRMxF COLOR red red red red blue blue blue yellow DUROMETER 93 Shore A 93 Shore A 93 Shore A 93 Shore A 85 Shore A 85 Shore A 85 Shore A 85 Shore A GRMxR KIT K AND S JAW STYLES JAW TYPE A rounded B rounded R JAW STYLE JAW A B F JAW STYLE JAW A B TYPE rounded rounded TYPE rounded rounded CODE TA TB CODE TA TB CODE TA TB MATERIAL THICKNESS (mm).70 to 1.51 to MATERIAL THICKNESS (mm).70 to MATERIAL THICKNESS (mm).70 to to to Tip 67

68 OPTIONS: ACCESSORIES Tx0 to Tx07 No scratch double tips reduce the fines or flakes generated when transferring galvanized panels. The tips have smooth curved surfaces that grip the panels but don t scratch the plating and therefore eliminate most fines that cause dirty dies and marked panels. They allow panel sensing by providing a protected mounting location for the (S01) proximity switch. Both round and flat tips mount on standard and flange style jaws, creating a very flexible sensing package. These tips are a set. The round tip needs to be matched to a flat tip. Both the round and flat tip need to be specified based on jaw style and material thickness. Available on GRM. A tip must be specified for jaw A and jaw B. DOUBLE SCRATCH S FOR MOUNTING FLAT PROXIMITY SWITCH (A on Jaw A, B on Jaw B) DOUBLE SCRATCH (ROUNDED) Tx0-0 DOUBLE SCRATCH (FLAT) Tx05 - Tx07 GRMTS--5 blank -5 blank -LAA -S01 -TA0 -TB05 RECOMMENDED COMBINATION FLANGE JAW STYLE JAW TYPE A rounded B flat CODE TA TB 0 to MATERIAL THICKNESS (mm) 1.1 to 1.53 to 1.95 to to to GRMTF S01-TA0-TB05 RECOMMENDED COMBINATION STANDARD JAW STYLE JAW TYPE A flat CODE TA MATERIAL THICKNESS (mm) 0 to to to.00 0 GRMTD JB01-S01-TA05 TE: JB01 REQUIRED FOR CHISEL JAW Tip RECOMMENDED COMBINATION STANDARD & SHORT JAW STYLES JAW TYPE CODE xr A A rounded rounded TA TA B B flat flat TB TB MATERIAL THICKNESS (mm) 0 to to to GRMTS S01-TA0-TB05 OPTION Tx0 Tx03 Tx0 Tx05 Tx06 Tx07 COLOR black silver gold black silver gold KIT Kit includes: 1 Tip 1 Mounting Screw Kit includes: 1 Tip 1 Mounting Screw and Washer 68

69 OPTIONS: ACCESSORIES Tx05 or Tx055 This option provides panel sensing with a double urethane tip that mounts and protects a proximity switch (S01) in a very small package. A special matching shorter urethane tip (Tx05) is required. Urethane tips eliminate marks in show surfaces. Both short and long tips mount on standard and flange style jaws, creating a very flexible sensing package. These tips are a set. The short tip needs to be matched to a long tip. Available on GRM. A tip must be specified for jaw A and jaw B. DOUBLE URETHANE S FOR MOUNTING FLAT PROXIMITY SWITCH (A on Jaw A, B on Jaw B) DOUBLE URETHANE (SHORT) Tx05 DOUBLE URETHANE (LONG) Tx055 GRMTS--5 blank -5 blank -LAA -S01 -TA05 -TB055 RECOMMENDED COMBINATION FLANGE JAW STYLE JAW TYPE A short B long CODE TA TB MATERIAL THICKNESS (mm) 0 to GRMTF S01-TA05-TB055 RECOMMENDED COMBINATION STANDARD JAW STYLE JAW TYPE A short B long CODE TA TB MATERIAL THICKNESS (mm) 0 to GRMTS S01-TA05-TB055 RECOMMENDED COMBINATION STANDARD & SHORT JAW STYLES JAW TYPE CODE xr A A short short TA TA B B long long TB TB MATERIAL THICKNESS (mm) 0 to 0 to GRMTS S01-TA05-TB055 Tip OPTION Tx05 Tx055 Tx05 COLOR red red Kit includes: 1 Tip 1 Mounting Screw Tx055 KIT

70 OPTIONS: ACCESSORIES Tx060 to Tx061 DRAWBEAD AND OFFSET (A on Jaw A, B on Jaw B) The drawbead tip is a double tip that is shaped similar to the inside of a drawbead. This shape allows it to transfer the panels by gripping the center of the drawbead. The opposite tip is a short double diamond that grips the other side of the panel. These tips grip the bottom of the drawbead (not the sides), so material thickness is needed. These tips are a set; the short diamond tip -030 is used for all material thicknesses. The long drawbead tip, -060 and -061, is specified based on the material thickness. Available for GRMxK, GRMxR, and GRMxS jaw styles only. Available on GRM. A tip must be specified for jaw A and jaw B. DRAWBEAD Tx SHORT OFFSET DIAMOND Tx030 GRMT S --5 blank -5 blank -LAA -TA060 TB030 RECOMMENDED COMBINATION K, R, & S JAW STYLES JAW A B TYPE drawbead diamond CODE TA TB MATERIAL THICKNESS (mm) 0 to 1.51 to DRAWBEAD Tx SHORT OFFSET DIAMOND Tx030 PANEL WITH DRAW BEAD Kit includes: 1 Drawbead Tip 1 Mounting Screw Kit includes: 1 Offset Tip 1 Mounting Screw and Washer Tip FOR STANDARD JAW STYLES ONLY KIT NUMBER TYPE long long short CODE TA or TB060 TA or TB061 TA or TB030 MATERIAL THICKNESS (mm) COLOR black silver black 70

71 OPTIONS: ACCESSORIES Tx063 to Tx065 SHARP DOUBLE CONE POINT (A on Jaw A, B on Jaw B) Sharp cone points have a tip that is very sharp (less than.015 in [0. mm]). They should be used with a double diamond tip (DDB, DDS, or DDG) mounted opposite them or a chisel or shovel jaw. Tips should be specified (black, silver, or gold) for the material thickness and jaw style. Sharp cones can be used on jaw A or jaw B. Available on GRM. Tx063 = black GRMS S --5 blank -5 blank -LAA -TA063 -TB063 Tx06 = silver RECOMMENDED COMBINATION For simplicity, these tables show the sharp cone point tip on jaw A. Tx065 = gold STANDARD JAW STYLE JAW A B CODE TA DDx 0 to DDB MATERIAL THICKNESS (mm) 1.51 to DDS 3.01 to DDG.01 to DDR SHORT JAW STYLE xr JAW A B CODE TA DDx MATERIAL THICKNESS (mm) 0 to DDB 1.51 to DDS 3.01 to DDR FLANGE JAW STYLE JAW A B CODE TA DDx 0 to DDB.86 to DDB MATERIAL THICKNESS (mm) 1.1 to DDB 1.53 to DDS 1.95 to DDS.30 to DDG.61 to DDR If sharp cones are ordered on jaw A & B, they will be mounted as shown. REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY CODE TA OR TB KIT S Kit includes: 1 Tip 1 Mounting Screw Tip 71

72 OPTIONS: ACCESSORIES Tx071 to Tx08 15 SINGLE OR DOUBLE DIAMOND (A on Jaw A, B on Jaw B) This option provides single or double diamond tips with the gripping surface on a 15 angle. The tips can be used to grip angled surfaces while keeping the clamp parallel, decreasing the space required by the clamp. These tips are a set and must be used as a pair. Tx071 to Tx08 accessories are only available for GRMxK and GRMxS clamps. Tx071, Tx07, Tx07, Tx075, Tx077, Tx078, Tx080, and Tx081 are only available for GRMxR clamps. Tx07 to Tx076 and Tx080 to Tx08 (downward mounting) are not available for GRMxF clamps. For other GRMxF applications, consult PHD. Available on GRM. SINGLE DIAMOND Tx071 to Tx076 GRM TS--5 blank -5 blank -LAA -TA071 -TB071 DOUBLE DIAMOND Tx077 to Tx08 UPWARD MOUNTING DOWNWARD MOUNTING FOR K AND S JAW STYLES Tip Assembling the tips rotated 180 turns upward mounting into downward mounting. 15 REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY OPTION Tx071, Tx07 Tx07, Tx075 Tx073, Tx076 Tx077, Tx080 Tx078, Tx081 Tx079, Tx08 PART STYLE single single single double double double COLOR black silver gold black silver gold Kit includes: 1 15 Single or Double Diamond Tip 1 Mounting Screw 15 KIT NUMBER PART OPTION TA071/TB071 TA07/TB07 TA073/TB073 TA07/TB07 TA075/TB075 TA076/TB076 TA077/TB077 TA078/TB078 TA079/TB079 TA080/TB080 TA081/TB081 TA08/TB08 OPTION TA071/TB071 TA07/TB07 TA07/TB07 TA075/TB075 TA077/TB077 TA078/TB078 TA080/TB080 TA081/TB081 MATERIAL THICKNESS (mm) FOR R JAW STYLE MATERIAL THICKNESS (mm) COLOR black silver gold black silver gold black silver gold black silver gold COLOR black silver black silver black silver black silver STYLE single single single single single single double double double double double double STYLE single single single single double double double double MOUNTING ORIENTATION upward upward upward downward downward downward upward upward upward downward downward downward MOUNTING ORIENTATION upward upward downward downward upward upward downward downward 7

73 OPTIONS: ACCESSORIES Tx083 to Tx08 SINGLE OR DOUBLE DRAWBEAD (A on Jaw A, B on Jaw B) The drawbead tip is a single or double tip that is shaped similarly to the inside of a drawbead. This shape allows the clamp to transfer panels by gripping the center of the drawbead. The opposite tip is a standard single or double diamond point tip on K, R, and S jaw styles. Standard tips must be called out in the model number and specified (black, silver, or gold) for the material thickness. Single and double diamond point tips are not required on C, D, H, J, L, and M jaw styles. Available on GRM. Tx083 Tx08 GRMT S --5 blank -5 SDB -LAA -TA083 GRMT M --5 blank -00 -LAA -TA08 RECOMMENDED COMBINATION K, R, S JAW STYLES JAW A B TYPE drawbead diamond CODE TA MATERIAL THICKNESS (mm) 0 to 0 to SDB DDB PANEL WITH DRAWBEAD C, D, H, J, L, M JAW STYLES JAW A TYPE drawbead CODE TA MATERIAL THICKNESS (mm) 0 to 0 to REPLACEMENT KIT NUMBERS IF ORDERED SEPARATELY OPTION Tx083 Tx08 Kit includes: 1 Drawbead Tip 1 Mounting Screw STYLE Single Double KIT NUMBER Tip 73

74 SEAL OPTIONS: ACCESSORIES - Vx SEAL OPTIONS V - Fluoro-elastomer seals for fluid compatibility V FLUORO-ELASTOMER SEALS FOR FLUID COMPATIBILITY This option provides a Series GRM Clamp with fluoroelastomer seals that are compatible with certain fluids. Seal compatibility should be checked with the fluid manufacturer for proper application. This option is not for high temperature applications. Consult PHD Clamp Division for high temperature applications. Available on GRM. GRM TS--5DCB-5DDB-LAA -V PISTON SEAL ROD SEAL BORE PLUG SEAL Seal REPLACEMENT KIT NUMBER IF ORDERED SEPARATELY GRM-B08 GRM-B08A KIT NUMBER Kit includes: 1 Rod Seal 1 Piston Seal 1 Bore Plug Seal 7

75 KITS (CUSTOMER MOUNTED): ACCESSORIES MACHINEABLE S (STEEL & URETHANE) This customer-mounted tip provides a steel or urethane blank that can be machined to match panel contours. It has extra stock on all sides, so it can be fitted to many applications. The steel blank is made of unplated 10 steel hardened to 7-3 Rc, and coated with a rust preventative oil dip, it can be machined and used as is or sent out for additional hardening and plating. The 90 Durometer red urethane blank is bonded to a steel interface that includes the mounting thread. Care should be taken when using these tips to ensure the jaws close to the correct dimension, so that full grip force and the locking feature are achieved. Do this by contouring both tips to match the panel s shape and thickness so that the dimension measured from the datum surface on back of one tip (including the panel) to the datum surface on the other tip is within the range specified. This tip can be mounted on moving and fixed standard and flange jaws. DATUM SURFACE KIT NUMBER MATERIAL Steel Urethane Kit includes: 1 Machineable Tip 1 Mounting Screw Kits 75

76 Clamping & Sheet Metal Handling Solutions Arm Over Electric Heavy Parts Clamping Metal Stamping Pin Locating Sheet Metal Transfer Shot Pin Swing Arm PHD, Inc Clubridge Drive P.O. Box 9070, Fort Wayne, Indiana 6899 U.S.A. Phone (60) Fax (60) PHDinEurope GmbH Arnold-Sommerfeld-Ring 599 Baesweiler, Germany Tel. +9 (0) Fax +9 (0) info@phdineurope.de 600-A 10/08 696