RPL Series. Hard Coat Anodize The body has hard-coat anodize 60 RC with PTFE impregnation. One Piece Body One piece lightweight aluminum body
|
|
- Evan Garrison
- 5 years ago
- Views:
Transcription
1 Parallel PNEUAI GRIPPERS PREISION OW PROFIE SERIES ONG FINGER APPIAIONS RP Series D-8-E--44 visit OEGA Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning Gripper Force to 1 N (2 to 3 lbs) Stroke to mm (. to.75") Accuracy of.5 mm (.2") and Repeatability of.3 mm (.1") Rigid and ow Friction Design Allows for onger Finger engths for Use on Delicate Parts Non-Synchronous otion Option Provides Independent Jaw Operation Up to 5 illion ycles in ypical Operation and 1 illion with aintenance Operating emperature -35 to 8 (-3 to 18 F) System Requires.3 to 7 bar (5 to 1 psi) Dry Filtered (4 icron or Better) Air Supply Requires 4 Way, 2 Position Valve and Regulator for Delicate Parts All models shown smaller than actual size. RP-1 DE-1 mounting stanchions, multiple sizes available. Note: Gripper fingers and adapter plate shown are for reference only. ooling is customers responsibility. D visit OEGA. RP-2 Product Features Hard oat Anodize he body has hard-coat anodize R with PFE impregnation Pre-oad Adjustment Screws Adjustable preload screws allow for adjustment of preload on roller bearings Preloaded Bearings Roller bearings are preloaded for maximum support and zero side play Non-Synchronous Operation Available One Piece Body One piece lightweight aluminum body Dowel Holes Slip fit dowel pin holes in body Accessory ounting Bracket Sensors Reads position of jaw (sold separately) Quality omponents Internal components are made from hardened bearing and tool steels Self ubricating Seals Self lubricating dynamic seals (Buna-N only) High Grip Force High grip force with respect to weight due to extremely efficient drive mechanism Patented Bearing Support Dual-V roller bearings provide low friction rolling motion -37
2 Body Equalizer operating principle Sensor agnet Standard Piston Drive Pin ap mounting information Grippers can be mounted and operated in any orientation. Scavenge or Purge Port For clean-room or harsh environments Roller Way Roller Bearings and ages Synchronizing Bar Shields Jaw Body mounts with screws and locates with slip-fit dowel pins for accuracy. Open Position Dual double acting opposed pistons, connected to both a jaw and a synchronizing bar by a drive pin, actuate in opposite directions. he synchronizing bars are connected to the equalizer which synchronizes the motion. he purge/scavenge port can be used to expel or retain contaminates using pressure or vacuum respectively. Suitable for internal or external gripping. he synchronizing elements can be removed for non-synchronous operation. echnical Pneumatic Pressure Operating Range:.3 to 7 bar (5 to 1 psi) ylinder ype: Dual double acting Dynamic Seals: Internally lubricated Buna-N Valve Required to Operate: 4-way, 2-position Air Quality Requirements Air Filtration: 4 micron or better Air ubrication: Not necessary* Air Humidity: ow moisture content (dry) losed Position emperature Operating Range Buna-N Seals (Standard): -35 to 8 (-3 to 18 F) FK Seals (Optional): -3 to 12 (-2 to F) aintenance Expected ife: Normal Application: 5 million cycles With Preventative aintenance: 1+ million cycles* Field Repairable: es Seal Repair Kits Available: es *Addition of lubrication will greatly increase service life. G Warning! Protect drive and bearing mechanism from falling debris when mounted upside down. Fingers attach to jaws with screws and locate by keying Fail Safe Valve OFSV-4 agneto Resistive Sensor OHSP-17 OHSN (2.3) in Position Sensors Available PNP or NPN agneto Resistive Style, 2 per Gripper Recommended Sensors are Slot ounted with ounting Kit and Easily Adjusted with Hex Key G Built-In ED for Ease of Positioning and roubleshooting with Quick Disconnect Fitting Sensor Extension ables Available in 2 or 5 m (. or 1') ong
3 parallel pneumatic grippers low profile series rpl-1m 44.5 (1.75) 15.9 (.594) Ø 3 SF 4 DP 3 4 DP (2) (4) RP-1 shown larger than actual size ) 4 DP OE, EPH) OSE) 1) 3 3 DP NG HOE, DO NO EEED DEPH) 4 DP FAI SAFE VAVE OPION 58 (2.3) F INGER FORE - F/ (1.31) (.3) (.52) (.22) (.44) (.52) (.22) (.44) 44.5 (1.75) AGNEO RESIIVE SENSOR OPION 5 (2) AIR 5 PORS (2) AIR (OSE) PORS (OSE) (.45) (.45) 44 (1.75) () 44 (1.75) () 38 (1.5) (OSED) 38 (1.5) (OSED) 2.2 (1.31) (.594) Ø 3 SF 4 DP 3 4 DP (2) JAW OUNING PAERN (4) (SHOWN IN POSIION) FAI SAFE VAVE OPION 58 (2.3) 1 PSI [7 bar] 8 PSI [5.5 bar] PSI [4.1 bar] 4 PSI [2.7 bar] 2 PSI [1.4 bar] GRIP FORE PER FINGER 8 (.3) A EFFEIVE FINGER ENGH - 9 (.3) DO NO EEED AIU EFFEIVE FINGER ENGHS 3 in. 75mm AGNEO RESIIVE SENSOR OPION 3 3 DP 3 3 DP NG HOE, NG HOE, DO NO EEED DO NO DEPH) EEED DEPH) 3 4 DP (4) 8 (.3) A -39 emp Range FAI SAFE VAVE OPION 58 (2.3) JAW OUNING 2.2 PAERN (SHOWN(1.31) IN 29. POSIION) 9 (.3) AGNEO RESIIVE SENSOR OPION 3 4 DP (4) RP-1 otal Rated Grip Force 1 psi, 7 bar N (2 lb) Stroke mm (.").7 Kg (.1 lb) Pressure Range ylinder Bore Ø.1 mm (.438") Displacement. cm 3 (.38" 3 ) emp Range (FK Seals).3 to 7 bar (5 to 1 psi) -35 to 8 (-3 to 18 F) -3 to 12 (-2 to F).1 sec Accuracy ±.5 mm (±.2") Repeatability ±.3 mm (±.1") Valve Required to Actuate 4-way, 2-position 8 (.3) A oading apacity Static Dynamic aximum ensile 222 N (5 lbs) 7 N (15 lbs) aximum ompressive 222 N (5 lbs) 7 N (15 lbs) aximum oment x 3.4 Nm (3"/lbs) 1.1 Nm (1"/lbs) aximum oment y 4.5 Nm (4"/lbs) 1.4 Nm (12"/lbs) aximum oment z 3.4 Nm (3"/lbs) 1.1 Nm (1"/lbs) apacities are per set of jaws and are not simultaneous
4 parallel pneumatic grippers low profile series rpl-2m RP-2 shown Ø 3 SF larger 4 DP than actual (2) size. 3 4 DP (4) 15.9 (.594) 15.9 (.594) SE) (.31) 3 3 DP NG HOE, DO NO EEED DEPH) 4DP D IVE HS. m 5 (2) AIR PORS (OSE) (.22) 5 (2) AIR PORS (OSE) (.22) 1 (.2) 1 (.2) (.52) (.44) (.52) (.44) (1.31) F INGER FORE - F/ 2 57 (2.) () 44 (1.75) (OSED) Ø 3 SF DP 3 4 DP (2) (.875) 2.2 (4) 29. (1.31) GRIP FORE PER FINGER PSI [1.4 bar] Ø 3 SF 4 DP 3 4 DP (2) 1 2 (4) 5 EFFEIVE FINGER ENGH - FAI SAFE VAVE OPION (.22) 58 (2.3) IN. (.52) (.44) 1 PSI [7 bar] 8 PSI [5.5 bar] PSI [4.1 bar] 4 PSI [2.7 bar] 9 (.3) NG HOE, DO NO EEED DEPH) 57 (2.) () 44 (1.75) (OSED) 3 4DP (4) 15.9 (.594) DO NO EEED AIU EFFEIVE FINGER ENGHS AGNEO RESIIVE SENSOR OPION 1 (.2) 3 in. 75mm 5 (2) AIR PORS (OSE) 3 3 DP 15.9 (.594) 3 (.12) DP NG HOE, DO NO EEED DEPH) 3 3 DP NG HOE, DO NO EEED DEPH) FAI SAFE VAVE OPION 58 (2.3) IN (.875) otal Rated Grip Force 1 psi, 7 bar 9 (.3) (1.31) AGNEO RESIIVE SENSOR OPION 3 4DP (4) RP-2 N (2 lb) Stroke 12.7 mm (.5").9 Kg (.2 lb) Pressure Range.3 to 7 bar (5 to 1 psi) ylinder Bore Ø.1 mm (.438") Displacement 1.2 cm 3 (.75" 3 ) emp Range -35 to 8 (-3 to 18 F) emp Range -3 to 12 (FK Seals) (-2 to F). sec Accuracy ±.5 mm (±.2") Repeatability ±.3 mm (±.1") Valve Required to Actuate 4-way, 2-position 3 (.12) oading apacity Static Dynamic aximum ensile 289 N (5 lbs) 89 N (2 lbs) aximum ompressive 289 N (5 lbs) 89 N (2 lbs) aximum oment x 5.1 Nm (45"/lbs) 1.7 Nm (15"/lbs) aximum oment y.8 Nm ("/lbs) 2.3 Nm (2"/lbs) aximum oment z 5.1 Nm (45"/lbs) 1.7 Nm (15"/lbs) apacities are per set of jaws and are not simultaneous
5 1..5) 3 3DP SENSOR G HOE) 22.2 (.875) (.53) 5 (2) AIR PORS (OSE) 5 (2) AIR PORS (OSE) 15 (.58) 15 Dimensions: (.58) mm (inch) 5 (2) 19 AIR PORS (OSE) 19 (.7) 15 (.58) (.7) 19 (.7) (.53) (.44) (.44) (.53) (.44) DP (1.1) (1.283) 3 3DP NG HOE) NG HOE) 8. (3.15).4 (1.) Ø 3 SF DP (2) F INGER FORE - F/ 2 FAI SAFE VAVE OPION (2.3) IN. o Order Ø 3 SF (2) DP (2) 3 4 DP DP () 28. (1.1) 1. () 22.2 (1.1) JAW OUNING PAERN (.5) (.875) JAW OUNING (SHOWN IN PAERN POSIION) (SHOWN IN POSIION) 7 (3.) () 7 (3.) 57 () (2.) (OSED) 57 (2.) (OSED) 9 (.3) 3 8 DP 28. (4) 32. (1.1) (1.283) AGNEO RESIIVE SENSOR OPION 3 8 DP (4) (4) GRIP FORE PER FINGER 79 GRIP 18 FORE PER FINGER 7 1 DO NO EEED DO NO EEED AIU EFFEIVE AIU EFFEIVE FINGER ENGHS FINGER ENGHS PSI [1.4 bar] 2 PSI [1.4 bar] 1 PSI [7 bar] 1 PSI [7 bar] 8 PSI [5.5 bar] 8 PSI [5.5 bar] PSI [4.1 bar] PSI [4.1 bar] 4 PSI [2.7 bar] 4 PSI [2.7 bar] parallel pneumatic grippers low profile series rpl-3m F INGER FORE - F/ in in. 12 mm EFFEIVE 5 FINGER 75 ENGH 12 mm- EFFEIVE FINGER ENGH - 7 (3.) () 57 (2.) (OSED) DP NG HOE) FAI SAFE FAI SAFE VAVE OPION VAVE OPION 9 (.3) (FK Seals) (2.3) IN. (2.3) IN (1.1) 32. (1.283) 28. (1.1) (1.283) (1.1) JAW OUNING PAERN (SHOWN IN POSIION) 3 4 DP () RP-3 otal Rated Grip Force 1 psi, 7 bar 1 N (3 lb) Stroke mm (.75").15 Kg (.32 lb) Pressure Range.3 to 7 bar (5 to 1 psi) ylinder Bore Ø 12.7 mm (.5") Displacement 2.4 cm 3 (.147" 3 ) emp Range -35 to 8 (-3 to 18 F) emp Range AGNEO RESIIVE 9 (.3) AGNEO RESIIVE SENSOR OPION -3 to 12 SENSOR OPION (-2 to F).14 sec Accuracy ±.5 mm (±.2") Repeatability ±.3 mm (±.1") Valve Required to Actuate 4-way, 2-position BOD ENGH BOD HEIGH BOD DEPH SROKE GRIP WEIGH ODE NO. mm (inch) mm (inch) mm (inch) mm (inch) 7 bar (1 psi) kg (lbs) RP (1.75) 29.5 (2).7 (.1) RP (.5) (2).9 (.2) RP-3 8 (3.15) 32. (1.283) 22.2 (.875) (.75) 1 (3).15 (.32) Ordering Example: RP-2 mini pneumatic low profile gripper with jaw stoke of 12.7 mm (.5"). Recommended accessories include 2 sensors and mounting kit, along with a 4-way, 2-position valve. emperature rating of -35 to 8 (-3 to 18 F). emperature range can be extended to -3 to 12 (-2 to F) with FK seals. Add -V to the end of the part number for additional cost. All models come with standard synchronous jaws, if non-synchronous jaws are required consult sales. Detailed specification and AD drawings are available at OEGA. Accessories ODE NO. Qty/unit DeSRIPION OSK-8 1 Sensor mounting kit OHSN-17 1 or 2 NPN magneto resistive sensor short barrel with quick disconnect fitting OHSP-17 1 or 2 PNP magneto resistive sensor short barrel with quick disconnect fitting AB-1 1 or 2 2 m (.') sensor extension cable with quick disconnect fitting AB- 1 or 2 5 m (1') sensor extension cable with quick disconnect fitting OFSV fail safe valve oading apacity Static Dynamic aximum ensile 4 N (9 lbs) 3 N (3 lbs) aximum ompressive 4 N (9 lbs) 3 N (3 lbs) aximum oment x.8 Nm ("/lbs) 2.3 Nm (2"/lbs) aximum oment y 9. Nm (8"/lbs) 2.8 Nm ("/lbs) aximum oment z.8 Nm ("/lbs) 2.3 Nm (2"/lbs) apacities are per set of jaws and are not simultaneous
PARALLEL PNEUMATIC GRIPPERS
PARAE PNEUAI GRIPPERS PREISION OW PROFIE SERIES RP Series Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning lass 1 lean Room Rated with orrosion
More informationDouble Acting Spring Assist
1.144 RPS Spring Assist 2-Jaw Parallel Grippers Patented double wedge design: his gripper utilizes our patented double wedge design for actuation and synchronization. Fail safe operation: he force supplied
More informationSize 50P 100P 25P 35P 40P 43P. Description. Seals. Viton High Temperature - - Description. Metric. Metric
RP-P Series 2-Jaw Precision Parallel Grippers Features and Benefits How o Order Features: Precision gripper with excellent part position repeatability Rack and pinion design for precise jaw synchronization
More informationgrippers pneumatic precision parallel movement DPP DirectConnect Series
grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded
More information2-Jaw General Industrial Parallel Grippers Features and Benefits How To Order. Size Stroke - - -
RP Series 2-Jaw General Industrial Parallel Grippers Features and Benefits How o Order Features: Widely used robust sealed design gripper Double wedge design for high impact applications Hardened steel
More informationRPW-500M-2 RPW-500M-1 RPW-375M-2 RPW-375M-1. No stroke option for size 250 & 750
RPW Series 2-Jaw Heavy-Duty Parallel Grippers Features and Benefits How o Order Features: Robust wide body gripper Grip force ranges from 222N thru 291N Strokes range from 19mm thru 114mm Rack and pinion
More informationParallel Grippers- Triple Wedge Centering Series
RP SERIES 1.1 Parallel Grippers- riple Wedge entering Series achine loading hree jaws make this gripper ideal for machine loading and unloading. Sealed design repels chips and other particulate from the
More informationAngular Grippers- 180 Series
D/ SERIES Angular Grippers- Series. angular gripper: he full jaw opening ( ) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. Multiple mounting locations:
More informationRPC Description. Metric
RP Series 3-Jaw Parallel Grippers Features and enefits How o Order Features: Self-centering gripper with very high grip force Optional stripper pate for part insertion/ejection Spring assist option maintains
More informationPrecision Mini Power Slides-Built-in Cylinder
Precision ini Power Slides-Built-in ylinder PS SERIES 4.126 Precision applications: Preloaded Dual- roller bearings eliminate side play for excellent part position repeatability. inear accuracy is within.0001"
More informationGC-45. Description. Seals. Viton High Temperature
DG/G Series 2-Jaw Precision Parallel Grippers Features and Benefits How o Order Features: Rugged, high precision long stroke gripper High impact resistant with double wedge design Versatile mounting on
More informationRA (cam driven) Series
RA (cam driven) Series Angular Grippers Features and Benefits How o Order Features: Highly reliable rugged general purpose gripper High grip force to size ratio due to cam driven design Fingers can be
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
1.252 3P Parallel Gripper- 3-Jaw Precision Series Precision Gripper he 3 concentric jaws and very good repeatability [.2mm] allows loading and unloading accurate cylindrical parts. Harsh Environments Shielded
More informationThrough Hole Parallel Gripper PPC Series
ourtesy of MA/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 8 hrough Hole Parallel Gripper PP Series hrough Hole Gripper: Designed for unique applications
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationAngular Motion Gripper Product Overview
2. 1 Angular Motion Gripper Product Overview RUA Series Angular Gripper 2-Jaw Angular Gripper Spring Assist Pneumatic or Hydraulic Operation Preferred Market: l Global Page2.2 DCT/CT Series TM 18 Angular
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationLinear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
More informationRPM/RPMC Series DPE/RPE
1.2 2-Jaw Product Overview PARAE GRIPPERS DPE/RPE Electric Gripper lean room class 1, class 1 with scavenge ost comparable to pneumatic systems Eliminates need for pneumatics Utilizes 24VD signal No programming
More informationRUA-112M. Description. Spring. Blank None. Spring Closed Spring Open RE RI Inductive Case Description
RUA Series Angular Grippers Features and Benefits How To Order Features: Robust, shielded, high force gripper Optional springs for part retention in case of air loss or increased grip-force Side or top
More informationParallel Grippers. Features. Operation. Contents. Mounting
Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals
More informationRotary Actuators DRG. See Page3.2 DRF. See. Page3.8 DRM
Rotary Actuators RR-18/28 Light Duty Rack and Pinion Rotary Actuator Series Designed for small or lightweight Low profile and bearing supported turn table provides an extremely compact package for tight
More informationParallel Grippers- Miniature Series
RPM SERIES 1.16 Parallel Grippers- Miniature Series Precision applications: Preloaded dual- V roller bearings eliminate side play for excellent part position repeatability. Miniature size: Compact design
More informationAngular Grippers 2.1 ANGULAR GRIPPERS
ngular Grippers NGULR GRIPPERS 2.1 ngular Motion Gripper Product Overview NGULR GRIPPERS 2.2 RU Series ngular Gripper 2-Jaw ngular Gripper Spring ssist Pneumatic or Hydraulic Operation Preferred Market:
More informationActuator Products. Actuator Products Air Cylinders Section B. Actuator Products. Catalog PDN1000-3US Parker Pneumatic
atalog PDN1-3US Air ylinders Section 1 Pictorial Index atalog PDN1-3US Tie Rod ylinders 3MA Series - Economy NFPA ylinder 6 ore sizes 1-1/2 through 5 inch 18 standard mounting styles Pressures up to PSIG
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationESCAPEMENT DEVICES DURA-SCAPE BC SERIES STANDARD LINE 2-1.1
DURASCAPE BC SERIES STANDARD LINE Full range of sizes and strokes Hard Stops Robust design Few moving parts Extremely Durable Fully field serviceable Sensors Available See Page 21.2 FOR ORE INFORATION
More informationDURA-SCAPE CC-SERIES. Non-Rotating Air Cylinder CC-1 CC-2 TECHINICAL SPECIFICATION OPERATING PRINCIPLES
CC Series of Non-Rotating Air Cylinders are designed as multi purpose units. The CC series is designed for applications where all the features of our SC series are not required, while still offering the
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More informationGRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
More informationPARALLEL PNEUMATIC 3-JAW GRIPPER
PARALLEL PNEUMATIC 3-JAW GRIPPER Major Benefits 3 jaw design provides self-centerg and maximum contact between part and jaw toolg Low profile to grip force and jaw travel ratios Eight sizes available both
More informationSizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module
More informationGrippers Parallel grippers
-finger parallel grippers -finger parallel grippers Product notes > Gripper with high gripping force > Double-acting for inside/outside gripping and short duty cycles > Single-acting: normally open (NO),
More informationLOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationWG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
More informationDURA-SLIDE AIR-SERIES. Air-Powered Slides AIR-10 AIR-20 AIR-30 AIR-40
AIRSERIES AIR Series of Pneumatic Linear Positioning Devices provide a practical, lowcost approach to automatic work positioning. The builtin air cylinder simplifies slide operation and eliminates the
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationDURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
More informationWBG Series Wide Body Grippers
WBG Series Wide Body Grippers www.numatics.com Table of Contents WBG Series Parallel Grippers Features and Benefits 3 How To Order 3 WBGS 60 Dimensions & Technical 4 WBGS 90 Dimensions & Technical 5 WBGL
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationLINEAR THRUSTER SLIDES
LINEAR THRUSTER SLIS PNEUMATIC INTERNALLY POWERED DIRECTCONNECT TM MODULAR SERIES L-Series long body thruster, shown smaller than actual size. E-Series short body thruster, shown smaller than actual size.
More informationPSP SERIES PSP SHOT PIN. Superior part locating and positioning. Provides the best repeatability in its class. Patent Pending PSP01A
PSP SERIES PSP SHOT PIN Superior part locating and positioning. Provides the best repeatability in its class. Port Fittings Option Switch Options Weld Cover Option Patent Pending ORDERING DATA: SERIES
More informationFeatures. Specification. Model. Acting type. Tube I.D. (mm) Port size M3 0.5 M Medium. Ambient temperature
series PRE GRIPPER (2-inger) Order example HD 2R MODE TUE I.D. 8 12 16 2 PIPING TYPE lank: xial piping R: Side piping eatures ow profile design saves space and reduces bending moments, improved accuracy
More informationPARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationGRIPPERS GRIPPERS 178
178 ol-o-matic s line of hardworking grippers are price competitive units, available in both angular and parallel styles and come in a range of six bore sizes (3/8", 5/8", 1", 1-1/2", 2" and 3") for a
More informationACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / /
Series 90000 ompact Actuators D/91000/, D/93000/ Single acting Ø 12... 63 mm ne third the basic length of a corresponding IS/VDA model ow friction, long life seal design Fully non-corrodible specification
More informationPWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationSRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.
SRU-mini Sizes 8 14 Weight 0.15 kg 0.65 kg Torque 0.16 Nm 1.15 Nm Axial force 255 N 330 N Bending moment 2.5 Nm 4.5 Nm Application example Reversing unit for the economical reorientation of cylindrical
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationPWG. Application example. Pneumatic 2-Finger Angular Grippers Universal Angular Grippers. Sizes Gripping moment 6 Nm..
PWG Sizes 65.. 230 Weight 0.33 kg.. 16.3 kg Gripping moment 6 Nm.. 934 Nm Opening angle per finger 20 Workpiece weight 1.1 kg.. 43 kg Application example Rotary feed unit for shafts PWG 130-B 2-Finger
More informationINFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationSeries OCQ Pneumatic Compact Cylinders
The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability
More informationPARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
More informationWedge Cam Operation Slide Guide. Air Gripper/2-Finger Type ø12, ø16, ø20, ø25. Option: Stainless steel
Wedge Cam Operation Slide Guide Air Gripper/2-inger Type ø2, ø, ø, ø2 MH MH oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials Standard: Carbon
More informationPrecise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
More informationRobotic End Effectors
Robotic End Effectors QC Robot Tool Changer Heady duty, spring loaded locking mechanism prevents separation in the event of loss of air pressure Support for optional pneumatic, fluid or electrical interface
More informationProduct Information. Long-stroke gripper PHL 32
Product Information PHL 32 PHL Flexible. Precise. Powerful. PHL long-stroke gripper 2-finger parallel gripper with large jaw stroke for large parts and / or a broad range of parts Field of application
More informationGlobal Series Air Cylinders
Global Series Air Cylinders Double Rod Options and Toolplates with interchange hole patterns for GT Series 2x øsp C bores opposite side for P SHCS KP EP KP 4x, GP threads (See pages 40-43) Global Series
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)
LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up
More informationPort Rc(PT), G, NPT M5 M5 1/8" 1/8" 1/8" Stroke mm 2 ~ 6 2 ~ 8 2 ~ 10 2 ~ 13 2 ~ 16. Air Consumption cc/cycle
2GN Parallel gripper with 2 jaws Features Wedge type, 2-Jaw parallel gripper Improved stability with longer gripping point between jaw & plunger Improved function, sti ness and outer look Made with flexible
More informationLight. Fast. Flexible. SGW Small Components Gripper
SGW Light. Fast. Flexible. SGW Small Components Gripper Small, simple pressurised plastic angular gripper with spring return Field of Application Universal application in clean and slightly dirty environments,
More informationPNEUMATIC SLIDES (SERIES ZA)
ZA PNEUMATIC SLIDES (SERIES ZA) Bore 2x6, 2x8, 2x12, 2x16 or 2x20 mm. Stroke from 10 mm to 150mm. Optional end of stroke adjustments using shock absorbers, rubber bumpers, (FGD) or grub screw, (FPD). Optional
More informationProduct Information. Gripper for small components RH 9010
Product Information RH 9010 RH cost-effective. Easy. Economical. RH gripper for small components The RH series is a cost-efficient gripping system, which is particularly suitable for simple cases of application.
More informationNumber of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
More informationNOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove
NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring
More informationGPAL Automotive Grippers Twice the Force Harsh Environment Ready Half the Weight
GPAL Automotive Grippers Twice the Force Harsh Environment Ready Half the Weight The GPAL Series of parallel grippers represents a pinnacle in parallel gripper development. This 5 th generation ZAYTRA
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Rod Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationAir Gripper (2 Finger) (3 Finger)
Rotary Actuated Air Gripper ( Finger) (3 Finger) MHR/MDHR, MHR3/MDHR3 High Precision - Repeatability ±0.01mm Parallel opening and closing mechanism utilizing a cross roller guide produces smooth operation
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP)
RE-CIRCULATING BALL BEARING (SERIES ) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. More than one carrier per rail can
More informationFKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot
Catalog No. KHS- KHS Series Jaw Parallel Motion Pneumatic Grippers Mounting Hole Can be mounted from the gripper side Mounting slot for easy sensor installation Sensor Capable Bottom tapped holes Can be
More informationXRAY Grippers - Extreme Force and Torque. Patented Synchronous Technology - Extended Life
XRAY XRAY Grippers - Extreme Force and Torque The XRAY concept was developed for applications that impart high acceleration to heavy objects or require extremely long, precisely positioned jaws. These
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL)
LL RE-CIRCULATING BALL BEARING (SERIES LL) Patented re-circulating ball bearing guide system. Excellent price / performance ratio. Several T-nut mounting options. Optional mounting accessory kits are available.
More informationHigh-Torque, Easy Speed & Stroke Control, Field Adaptable
D R I V I N G T H E I N D U S T R Y F O R W A R D High-Torque, Easy Speed & Stroke Control, Field Adaptable Fully Adjustable Stroke Length and Jaw Stop Positions Flow Controls Fitted as Standard Quick
More informationModular. Robust. Flexible. SWS Quick-change system
SWS Modular. Robust. Flexible. SWS Quick-change system Pneumatic tool changing system with patented locking system. Field of Application C an be used wherever short changeover times between a handling
More informationOur policy is one of continued research and development. We therefore reserve the right to
D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics
More information2WE30/5WE30: WOG - Stainless Steel Ball Valve 2-Piece NPT Ends Stainless Steel Full Port Direct Mount Actuation Design
2WE30/5WE30: 2000-1500 WOG - Stainless Steel Ball Valve 2-Piece NP Ends Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description Item # Figure Design Parameters Mount
More informationProduct Information. Rotary gripping module with angular gripper RW
Product Information RW RW Flexible. Modular. Compact. Gripper Swivel Module RW Rotary gripper combination, consisting of a rotary module and a 2-finger angular gripper Field of application Gripping and
More informationECOLINE: AFFORDABLE AND INNOVATIVE LINEAR BEARINGS
ECOLINE: FFORDBLE ND INNOVTIVE LINER BERINGS ECOLINE s products have been designed to fit in applications where quality movement is needed at a low price. The patented design offers a well-protected, smooth
More informationFlexible. Modular. Strong. SWS-L Quick-change System
Flexible. Modular. Strong. SWS-L Quick-change System P neumatic tool changing system with patented locking system for heavy loads. Field of Application C an be used wherever short changeover times between
More information30E10: ASME Class Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design
3E1: ASME lass 3 - Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description 2 Piece ASME 3 Stainless Steel Ball Valve
More informationEscapements. AGE Series
GE Series Escapements merican Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 Fax: 203-452-5943 info@gi-utomation.com www.gi-utomation.com 1 GE-1 Feed Escapement uilt-in ir Cylinder
More informationAGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
More information10E10: ASME Class Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design
1E1: ASME lass 15 - Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description 2 Piece ASME 15 Stainless Steel Ball Valve
More informationXRAY S Parallel Opening/Closing Type Gripper 2 Finger 2200N
XRAY S 2200 2 Finger 2200N Handles big jobs with tremendous torque and force capability. Long jaws are no problem with the incorporated linear bearing rail. Sealed for years of trouble free use in tough
More informationFlexible. Light. Productive. LEG Long-stroke Gripper
LEG Flexible. Light. Productive. LEG Long-stroke Gripper Light long-stroke gripper for flexible and highly dynamic handling of various components Field of Application For use in a clean working environment,
More information