Features and Benefits
|
|
|
- Blaze Wade
- 5 years ago
- Views:
Transcription
1
2 Features and Benefits How To Order Dimensions Specifications and Load Ratings Mounting Options NuMate Mounting System Multi-Position How to Order Multi-Position Dimensions Numatics 2004 Rev. 2/04 2
3 Our SH-Series are available with a wide range of options... A. Body: Hardcoat Anodized Aluminum(6061-T6511)...lightweight, durable, high strength to weight ratio. Standard Dowel Location Holes...allows precision mounting. Multi-Surface Mounting Holes...flexible, easy access for mounting. B. Air Cylinder: Standard Stainless Steel Body and Rod...corrosion resistant. Standard w/ Magnetic Piston...sensing applications (Hall, Reed or Prox) added as required. C. Alignment Coupler: Isolates Piston Rod from side loading...maximize life of cylinder, 360 degrees of float. D. Tooling Plate: NuMate Universal Mounting Pattern...standardized mounting Holes Drilled/Tapped and C bored from the system, eliminates custom transition plates. opposite side...easy mounting. Standard Dowel Locating Holes...precision mounting. E. Guide Shafts: Hardened Steel to Rc long life. Hardened Stainless Steel to Rc long life. Precision Ground & Polished to 15uRMS...smooth cycling/ low breakaway. Pilot Mounted to Tooling Plate...maximum rigidity. Large Diameters...increased load capacity. F. Bearings: (Three Choices) Four Precision Linear Ball Bearings Sealed with Rod Wipers...safe guarding against dirt & contamination. Self-Aligning...reducing wear, maximizing both. Four Sintered Bronze Sleeve Bearings load capacity and long life. Oil Impregnated...self lubricating. High Pv Rating...long service life. Four Frelon Compounded Teflon Low Friction...longest wear life. Maintenance Free...self lubricating. G. Bumpers: (Standard) Polyurethane Material...durable and long lasting. Integrated into body Design...reduces shock loading on extend & retract. Preliminary Rod Wiper...removes larger contamination from Guide Shafts. H. Adjustable Shaft Collars: (Standard) Extend Stroke Adjustment...flexibility. G A E C B H D G F 3
4 How to Order Bore Size 031 = 5/16" 056 = 9/16" 075 = 3/4" 106 = 1-1/16" 150 = 1-1/2" 200 = 2" 250 = 2-1/2" 300 = 3" Standard Stroke (inches) X5 = 1/2" 09 = 9" 01 = 1" 10 = 10" X9 = 1-1/2" 11 = 11" 02 = 2" 12 = 12" 03 = 3" 13 = 13" 04 = 4" 14 = 14" 05 = 5" 15 = 15" 06 = 6" 16 = 16" 07 = 7" 17 = 17" 08 = 8" 18 = 18" Refer to page 435 for slide stroke availability. SH LB 1 3 C S 3 Bearing Option LB = Linear Ball TB* = Teflon BB = Sintered Bronze * Supplied Standard with Stainless Steel Guide Rods, Stop Collars and Hardware. Cylinder Type 1 = Buna-N Seals*** 2 = Viton Seals (no magnet) 3 = Buna-N Seals w/cushions** 4 = Viton Seals with magnet*** ** Cushions available on 1-1/16", 1-1/2", 2", and 2-1/2" & 3" bore. *** Magnet not available on SH031 Ordering Example Part Number: 03LB13CS3* Part Description: 3/4 Bore by 3 inch stroke with Linear Ball Bearing, Standard Seals, Two Position Reed Switches, Standard Mount, Shock Hardware on Extend and Retract, Shocks not included. *When entering an order, DO NOT use spaces or dashes. Follow example above. When Ordering Additional Sensors, Mounting Kits, or Shocks: QUICK SWITCH STANDARD DISCONNECT DESCRIPTION PART NO. PART NO. Hall Effect - PNP (Sourcing) HPNPS31* HPNPQ31* Hall Effect - NPN (Sinking) HNPNS32* HNPNQ32* Reed Switch RSS02* RSQ02* Prox Switch - PNP (Sourcing) SWPP SWPP - QS01 Prox Switch - NPN (Sinking) SWPN SWPN - QS01 Prox Switch - PNP 90 - SWPP - QL01 Prox Switch - NPN 90 - SWPN - QL meter cable - PXC 90 Straight 5 meter cable - PXC ST *Bands and tracks required for mounting. Shock Option Shock Hardware Only 1 = Extend 2 = Retract 3 = Extend/Retract 4 = No Shock Hardware Hardware & Shocks A = Extend B = Retract C = Extend/Retract * See page 436 for bore size availability and dimensional changes. Mounting Option S = Std. Mount B = Base Mount A = Angle Mount Sensing Position A = Single Pos. Extend B = Single Pos. Retract C = Two position D = No Sensing Sensing Type Standard Cord Set 1 = Hall Effect PNP (Sourcing) 2 = Hall Effect NPN (Sinking) 3 = Reed Switch 4 = Prox Switch - PNP (Sourcing) 5 = Prox Switch - NPN (Sinking) 6 = No Sensing 7 = 8mm Threaded Barrel Prox Bracket* Quick Disconnect Cord Set Z = Hall Effect PNP (Sourcing) Y = Hall Effect NPN (Sinking) X = Reed Switch W = Prox Switch - PNP (Sourcing) Straight V = Prox Switch - NPN (Sinking) Straight U = Prox Switch - PNP (Sourcing) 90 T = Prox Switch - NPN (Sinking) 90 * Bracket only - does not include switch ** Sensing not available on the SH031 See Sensor section. SERIES BASE ANGLE SHOCK SLIDE MOUNT MOUNT ABSORBER SH031 MB031 AB031 - MB056 AB056 - MB075 AB075 SK106 MB106 AB106 SK106 MB150 AB150 SK150 MB200 AB200 SK200 AB200 SK250 - SK300 4
5 SH031,,, Slides Z1 SENSOR OPTION HALL/REED V BB LL Port AA SHAFT L2 TYP. FF Located on Bottom Z B X + Stroke Z L1 CC EE F H K DD MM W Y C SH031 AA Nom Nom Nom Nom. BB CC DD C Bored for #6 SHCS, C Bored for #10 SHCS, C Bored for 1/4 SHCS, C Bored for 5/16 SHCS, EE Tapped # x.28 DP Tapped 1/4-28 x.50 DP Tapped 5/16-24 x.62 DP Tapped 3/8-24 x.75 DP From Opposite side From Opposite side From Opposite side From Opposite side FF / x 0.18DP 0.125/0.126 x 0.25DP / x.37dp / x.37dp #10-32 thru, C Bored 1/4-20 thru, C Bored 5/16-18 thru, C Bored GG for #6 SHCS From for #10 SHCS From for 1/4 SHCS From Opposite Side Opposite Side Opposite Side #10-32 thru, C Bored 1/4-20 thru, C Bored 5/16-18 thru, C Bored HH #6-32 thru For #6 SHCS From For #10 SHCS From For 1/4 SHCS From Opposite Side Opposite Side Opposite Side JJ / x 0.18DP 0.125/0.126 x 0.25DP / x.37dp / x.37dp KK - #6-32 x.25dp #10-32 x.37dp 1/4-20 x.50dp LL #10-32 # /8 NPTF 1/8 NPTF MM #5-40 x.18 DP* #6-32 x.20 DP #10-32 x.28 DP 1/4-20 x.37 DP *SH031 has four holes per side. G J M A JJ G T PROXIMITY BRACKET P N Q1 U E Z2 R S D Q2 HH KK DRILLED FOR 8MM PROXIMITY SWITCH SH031 A B C D E F G H J K L L M 0.999/ / / /1.875 N P 0.999/ / / /1.875 Q Q2 Center Line Center Line Center Line 0.12 R S T U V W X Y Z Z1 N/A Z2 N/A
6 ,, Slides Z1 SENSOR OPTION HALL/REED V BB LL Port AA SHAFT L2 TYP. FF Located on Bottom Z B X + Stroke Z L1 CC EE F H K DD MM 6 W Y C G J M A JJ G T PROXIMITY BRACKET P N Q1 U E Z2 R S D Q2 HH KK DRILLED FOR 8MM PROXIMITY SWITCH A B C D E F G H J K L L M 2.499/ / /3.001 N P 2.499/ / /3.001 Q Q R S T U V W X Y Z Z Z AA Nom Nom Nom. BB CC DD C Bored for 5/16 SHCS, C Bored for 3/8 SHCS, C Bored for 3/8 SHCS, EE Tapped 3/8-24 x 0.75 DP Tapped 7/16-20 x DP Tapped 7/16-20 x DP From Opposite side From Opposite side From Opposite side FF / x 0.37DP 0.250/0.251 x 0.50DP 0.250/0.251 x 0.50DP 5/16-18 thru, C Bored 3/8-24 thru, C Bored 3/8-24 thru, C Bored GG for 1/4 SHCS From for 5/16 SHCS From for 5/16 SHCS From Opposite Side Opposite Side Opposite Side 5/16-18 thru, C Bored 3/8-24 thru, C Bored 3/8-24 thru, C Bored HH For 1/4 SHCS From For 5/16 SHCS From For 5/16 SHCS From Opposite Side Opposite Side Opposite Side JJ / x 0.37DP 0.250/0.251 x 0.50DP 0.250/0.251 x 0.50DP KK 5/16-18 x 062DP 5/16-18 x 0.62DP 5/16-18 x 0.62DP LL 1/8 NPTF 1/4 NPTF 1/4 NPTF MM 1/4-20 x 0.37 DP 5/16-18 x 0.50 DP 5/16-18 x 0.50 DP
7 Slides V Z1 SENSOR OPTION HALL/REED LL BB AA L2 TYP. EE 4PL B X + STROKE Z FF LOCATED ON BOTTOM F H K L1 CC Z MM DD W G J M A Y C GG 8PLCS. HH JJ T S R Q2 P D 7/16-14 THR'D THRU Q1 4 PLACES 0.75 Q1 PROXIMITY BRACKET U N /0.188 x.37 DP E Z1 KK 0.250/0.251 x.50 DP DRILLED FOR 8MM A 9.50 PROXIMITY SWITCH B 7.50 C 3.37 D 9.44 E 3.31 F 2.00 G 3.75 H 2.50 J 4.00 K 3.50 L L M / N 0.94 P / Q Q R 2.75 S 6.00 T 8.50 U 2.50 V 7.00 W 0.97 X Y 2.50 Z 3.00 Z Z AA Nom. BB 1.12 CC 4.25 DD 0.75 C Bored for 7/16 SHCS, EE Tapped 1/2-3 x 0.75 DP From Opposite side FF / x 0.50DP GG 1/2-13 x.38 DP 7/16-14 thru, C Bored HH For 5/16 SHCS From Opposite Side JJ / x 0.50DP KK 5/16-18 x 0.50DP LL 3/8 NPTF MM 3/8-16 x 0.57 DP 7
8 Maximum Dynamic Load and Deflection Ratings Positions A, B & C Linear Bearing Option Position A Stroke Inches Stroke Inches LOAD * SH031 Series not offered in Linear Ball Bearing Option. Maximum load and deflection ratings, 100% at tool plate mounting face Position B / LOAD Position C LOAD Max Moment
9 9 Maximum Dynamic Load and Deflection Ratings Positions A, B & C Bronze Bearing and Teflon Bearing Options SH031* Stroke Inches N/A N/A N/A N/A 8 N/A N/A N/A N/A 9 N/A N/A N/A N/A 10 N/A N/A N/A N/A 11 N/A N/A N/A N/A 12 N/A N/A N/A N/A Stroke Inches N/A N/A N/A N/A 14 N/A N/A N/A N/A 15 N/A N/A N/A N/A 16 N/A N/A N/A N/A 17 N/A N/A N/A N/A 18 N/A N/A N/A N/A Stroke Inches * SH031 Series not offered in Linear Ball Bearing Option. Maximum load and deflection ratings, 100% at tool plate mounting face N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A /
10 Unit Weight Table Base Unit Weight (lbs.) Adder/inch of stroke (lbs.) Add base weight to inch adder X stroke. Unit Output Force Table Extend Force (lbs.) Retract Force (lbs.) Multiply force factor X input pressure in PSI. Shock Option Dimensions DIMENSION A B C D X SH sample weight calculation: Model W/6 stroke, (0.15 x 6) = lbs. SH * Shock Option available on series and larger sample output force calculation: Model extend force@ 70PSI, 1.76 x 70 = lbs
11 MB Series Base Mounting MB Vertical Mounting AB Series Angle Mounting Not Available on MB Horizontal Mounting SLIDE SERIES SH031 BASE P/N MB031 MB056 MB075 MB106 MB150 MB200 A B C D 0.626/ / / / / /2.503 Base Mount Not Available for & E F G H J 0.125/ / / / / /0.251 K Clearance for Clearance for Clearance for Clearance for Clearance for #8 SHCS #10 SHCS 1/4 SHCS 5/16 SHCS 5/16 SHCS Clearance for 3/8 SHCS AB Angle Mounting SLIDE SERIES SH031 / BASE P/N AB031 AB056 AB075 AB106 AB150 AB200 A B C D E F G H J K L M For #10-32 SHCS For 1/4-28 SHCS For 5/16-24 SHCS For 3/8-24 SHCS For 3/8-24 SHCS For 7/16-20 SHCS N For #10 SHCS For 1/4 SHCS For 5/16 SHCS For 3/8 SHCS For 3/8 SHCS For 7/16 SHCS 11
12 NuMate Direct Mount, Mounting System The NuMate mounting system provides a standard series of drilled, tapped and counterbored holes allowing each slide series to mount with each other and other slide series in various combinations without the use of adapters, transition plates or other costly methods. The NuMate mounting system also utilizes dowel hole locations for precision mountings. The NuMate mounting system is the most versatile mounting method of its kind, providing customers with a cost effective method for building modular component automation. The NuMate mounting system is consistent across the NMC spectrum of products for automation. Y Axis X Axis Application B X-AXIS SLIDE SH031 SH031 SH031 Y Axis Application A X Axis Z Axis APPLICATION A APPLICATION B APPLICATION C MATING Y MATING Y MATING Z AXIS SLIDE AXIS SLIDE AXIS SLIDE X Axis Application C 12
13 How to Order 3 Position Linear Slide Bore Size C = 3/4 Inch F = 1-1/16 Inches K = 1-1/2 Inches L = 2 Inches M = 2-1/2 Inches N = 3 Inches Front Cylinder (Total Stroke) Inches (Standard max stroke lengths vary by bore size, see load rating information. MH C A Fractional Stroke for Front Cylinder * = 0 Inch C = 1/4 Inch E = 1/2 Inch G = 3/4 Inch *Leave blank if factional stroke = 0. Back Cylinder (First Stroke) Inches Fractional Stroke for Back Cylinder A = 0 Inch C = 1/4 Inch E = 1/2 Inch G = 3/4 Inch Bearing and Guide Shaft Type 1 = Linear Ball Hardened Steel Shafts 2 = Linear Ball Stainless Steel Shafts 3 = Teflon Hardened Steel Shafts 4 = Teflon Stainless Steel Shafts 5 = Sintered Bronze Hardened Steel Shafts 6 = Sintered Bronze Stainless Steel Shafts Cylinder Type 1 = Buna-N Seals 2 = Viton Seals-No Magnet 3 = Buna w/cushions Full Ext/Full Retract 4 = Viton with Magnet D S4 Shock Absorber Option 1 = Extend 2 = Retract 3 = Extend/Retract 4 = No Shock Hardware Hardware & Shocks A = Extend B = Retract C = Extend/Retract Mounting Option S = Standard Mount B = Base Mount A = Angle Mount Sensing Position A = Single Extend B = Single Retract C = Two position D = No Sensing E = 3 Position F = 4 Position G = 5 Position Sensing Type Standard Cord Set 1 = Hall Effect PNP (Sourcing) 2 = Hall Effect NPN (Sinking) 3 = Reed Switch 4 = Prox Switch on Cylinder - PNP (Sourcing) 5 = Prox Switch on Cylinder - NPN (Sinking) 6 = No Sensing 7 = 8mm Threaded Barrel Prox Bracket (Prox Ready)* Quick Disconnect Cord Set Z = Hall Effect PNP (Sourcing) Y = Hall Effect NPN (Sinking) X = Reed Switch W = Prox Switch - PNP (Sourcing) Straight V = Prox Switch - NPN (Sinking) Straight U = Prox Switch - PNP (Sourcing) 90 T = Prox Switch - NPN (Sinking) 90 * Bracket only - Bracket for full extend and full retract only, does not include switch See Sensor section. 13
14 3 Position Linear Slide Dimensions - Inches SH SERIES BACK CYLINDER (FIRST STROKE) C + FRONT CYLINDER STROKE + BACK CYLINDER STROKE FRONT CYLINDER STROKE (TOTAL STROKE) B + FRONT CYLINDER STROKE FRONT CYLINDER (TOTAL STROKE) A B C D D + FRONT CYLINDER STROKE (TOTAL STROKE) A 14
Table of Contents. SH Series Linear Slides
Table of Contents SH Series...3-17 Features and Benefits... 3 How To Order... 4 Dimensions...5-7 Specifications and Load Ratings....8-10 Mounting Options... 11 NuMate Mounting System.... 12 Multi-Position
PERFORMANCE DATA. The lightweight, durable, low-profile ROD CYLINDER SLIDES
The lightweight, durable, low-profile H-Block design is the most versatile of our rod cylinder slides. It also has one of the highest ratings of load weight vs extension for its kind in the industry. The
Table of Contents PBS Series Features and Benefits
Table of Contents PBS Series........................................... 3-6 Features and Benefits..................................................................................3 How To Order........................................................................................4
Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
PBS Series Power Block Slide
PBS Series Power Block Slide www.numatics.com Table of Contents PBS Series Features and Benefits 3 How To Order 4 Technical Specifications 4 Dimensions 5 Quick Disconnect Cables 6 Switch Information 6-7
Four Shaft Linear Thrusters
Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust
Features and enefits
..............................................3-13 Features and enefits..............................................................................3 How To Order....................................................................................4
Table of Contents BDU Series Features and Benefits
Table of Contents BDU Series.............................................. 3-13 Features and Benefits..................................................................................3 How to Order.........................................................................................4
Linear Thrusters/PneuMoment
/PneuMoment Extruded TE Series 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic Actuators PneuMoment
C-Series Cylinders: Table of Contents
C-Series Cylinders: Table of Contents C-Series C-Series Slide Features... pg. 2 CD and CE Series... pg. 3 Quick Reference... pg. 3 How to Order: C Series... pg. 4 Options: C Series... pg. Dimensional Data
Linear Thrusters/PneuMoment
/PneuMoment Extruded TE Series (Composite Bearings) 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic
Z-Series.qxp:TurnAct Cseries.qxp 10/1/09 2:35 PM Page ii Z-Series Cylinders
Z-Series Cylinders Z-Series Cylinders: Table of Contents Z-Series Slide Features...pg. 2 ZD and ZE Series...pg. 3 Quick Reference...pg. 3 How to Order: Z Series...pg. 4 Options: Z Series...pg. 5 Dimensional
Table of Contents Tiny Titan Series Features and Benefits How to Order Optional Features
Table of Contents Tiny Titan Series. 3-22 Features and Benefits.................. 3 How to Order......................... 4 Optional Features..................... 5 Basic and Front Flange Mounts..........
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Bimba 304 stainless steel body
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Pneu-Moment Bimba Pneu-Moment
Two Shaft Linear Thrusters
Two Shaft Linear Thrusters TWO SHAFT THRUSTERS Seven Models with bores from 9/16 to 4 Compact, light weight robust design Smooth linear motion CYLINDER Several manufacturers to choose from Pneumatic or
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series (Composite Bearings) 3.11-3.16 T Series (Ball Bearings) 3.17-3.22 Multiple Position 3.23-3.24 NEW T4 Series 3.25-3.28 Checklist 3.29 PneuMomentPneumatic Actuators
Table of Contents. Numatics 2009 Rev. 1/09
Table of ontents RW Series...-8 eatures and Benefits... How To Order... Replacement omponents... imensions... 5 Technical Specifications... 6 Switch Information....7-8 Numatics 2009 Rev. /09 2 RW-Series
Guided Slides and Guided Rods
Guided Slides and Guided Rods Guided Slides & Guided Rods: Table of Contents Guided Slides & Guided Rods Guided Slides Product Features...pg 2 Quick Reference...pg 2 How to Order...pg 3 Dimensional Data...pg
RT Series Roundline Plus Thrusters
9/16" to 3" bore Composite and Roller Bearings PS magnetic piston option Optional ecology seal Optional shock absorbers Choice of high load composite or precision low friction bearings Comes with stroke
Table of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
Table of Contents. ISO/VDMA Series
Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17
RW Series eatures and Benefits
RW Series...............................................................................3-6 eatures and Benefits..............................................................................3 ow To Order....................................................................................4
Table of Contents. R Series
Table of Contents R Series...-8 Features and Benefits... How to Order.... Standard Specifications.... 5 Options... 6 Cushions... 6 Bumpers... 6 Shock bsorbers... 6 Mounting Options... 7 Shaft Seal Cover
Innovative Designs For Positive Parts Transfer
Innovative Designs For Positive Parts Transfer AUTO-SLIDE CATALOG CONTENTS Cylinder Powered Linear Slide (AFPRS ) 3 Cylinder Powered Bi-Directional Slide (AFPRBD) 6 V Style Pick & Place (AFPPV) 8 L Style
Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated
Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic
Flat Cylinders Flat-1 Square Flat-1 2.3-2.12 2.13-2.19 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories Stainless Steel Flat-1 EF1 Cylinders
Table of Contents FE Series Features and Benefits
Table of Contents FE Series.................................................................................... -6 Features and Benefits..................................................................................
Cylinders HD1 Cylinders
Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and
MXP BAND CYLINDER MAXIMUM DURABILITY N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL ENGR PB CC MG LS BC4 BC3 BC2 MXP ABT.
www.tolomatic.com MXP BAND CYLINDER N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL CONTENTS N Internal Bearing Features... MXP_2 S Solid Bearing Features... MXP_4 P Profiled Rail Features... MXP_6
WG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
ASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
The Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
Angular and Parallel Grippers
CAP0551_Grippers_R2.qxp:OEM_TA 2/8/17 2:16 PM Page ii Angular and Parallel Grippers Table of Contents: Grippers Angular Grippers, Parallel Grippers and Options & Accessories Angular Grippers Introduction...
Optimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
Table of Contents. SRS Series...3-6
Table of Contents SRS Series...3-6 Features and Benefits... 3 How to Order.... 4 Technical Specifications... 4 Critical Speed... 4 Dimensions... 5 Load Ratings... 5 Application Request for Belt and Screw
PNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
VERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
Ultran Cylinders. Ultran Band Rodless Cylinders. Ultran High Load Slides. Ultran Application Checklist. Ultran High Load Electric Slides
5.3-5.4 5.5-5.12 5.13-5.23 5.24-5.32 Ultran Band Rodless 5.33-5.43 Ultran Application Checklist 5.44 Electric 5.45-5.53 Ultran Ultran Bimba Ultran SPACE SAVINGS OF ALMOST 50% IN MOST MODELS Two Models:
pneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
Linear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
GRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
acting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.
AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors
EQ Series OEM Aluminum NFPA Interchangeable Cylinder Line
Series OEM Aluminum NFPA Interchangeable Cylinder Line www.numatics.com Table of Contents EQ Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Rod Ends 6 Dimensions 7 How to Order - EQ Series
Electric Slide Solutions
Electric Slide Solutions Series ESCV Electric Thruster Slide Designed for vertical or non-rotating applications Built on the field proven Series SCV, the electric version offers many of the same benefits
Mxp band cylinder MAXIMUM DURABILITY. N Internal Bearing S solid bearing P profiled rail.
www.tolomatic.com Mxp band cylinder N Internal Bearing S solid bearing P profiled rail Contents N Internal Bearing eatures..... MXP_2 S Solid Bearing eatures........ MXP_4 P Profiled Rail eatures.........
MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI
AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed
Maintenance Instructions & Parts List
PM-PTR/LTR-C Automation Actuator Division Wadsworth, Ohio 448 October 7, 993 Rev. October 999 PTR/LTR Series Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When
SMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
SMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
GRIPPERS GRIPPERS 178
178 ol-o-matic s line of hardworking grippers are price competitive units, available in both angular and parallel styles and come in a range of six bore sizes (3/8", 5/8", 1", 1-1/2", 2" and 3") for a
aluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm)
Technical Data Versions for pneumatic linear drive: Series OSP-P aluminum guide carriage Roller Guide Powerslide Loads, Forces and Moments aluminum clamping rail hardened steel rail roller cover with wiper
Mxp band cylinder. N Internal Bearing S solid bearing P profiled rail MAXIMUM DURABILITY
Mxp band cylinder N Internal Bearing S solid bearing P profiled rail MAXIMUM DURABILITY Pneumatic Actuators Electric Actuators Drives & Motors Largest selection of rodless cylinders in band, cable, and
Parallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
INFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES
![INFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES](/thumbs/89/98912537.jpg "INFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES")
INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
Parallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
Series OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range of linear guides
PNEUMATIC GROUP Guides ORTMAN SYSTEM PLUS LINEAR GUIDES FOR OSP-P 19 Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range
SMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock 1 1/8, 1, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of
QUICK INDEX. Series SMA Aluminum. Pancake and conventional lengths 1 1/8 thru 3 bore. Series SMS Solid Stainless
QUICK INDEX A U R O R A A I R P R O D U C T S Series SMA Aluminum Pancake and conventional lengths /8 thru 3 bore Series SMS Solid Stainless Pancake and conventional lengths for hostile environments Series
HPS Powerslide-2 guided rodless cylinder
HPS Powerslide-2 guided rodless cylinder NEW SHOCK ABSORBER MOUNTING OPTIONS SEE PAGE 6 Introducing the Proximity Switches Hepco HPS Powerslide-2 The original Hepco Powerslide was the first ever bearing-based
PARALLEL PNEUMATIC 3-JAW GRIPPER
PARALLEL PNEUMATIC 3-JAW GRIPPER Major Benefits 3 jaw design provides self-centerg and maximum contact between part and jaw toolg Low profile to grip force and jaw travel ratios Eight sizes available both
Linear Guides Series OSP-P
Linear Guides Series OSP-P NEW Contents Description Page Overview 31-32 Plain bearing guide SLIDELINE 33-34 Roller guide POWERSLIDE 35-38 Aluminium roller guide PROLINE 39-40 Recirculating ball bearing
L & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
* Screw clearance to allow bolt head to pass through - no counter bores
Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with
Catalog PAN2-2. Pancake. II Air Cylinders. Superior Interchangeable Industrial Air Cylinders
Catalog PN2-2 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD How it works....................................
SERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)
BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED
FP 106 x PTM - PS
Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:
PTR Series Pneumatic Rack & Pinion Rotary Actuator
zact14 Pneumatic Rack & Pinion Rotary Actuator Contents Features... 2 Specifications... 3 Dimensions... 4 Mounting Options... 5 Shaft Options... 6 Port Size and Location... 7 Cushions and Bumpers... 8
Note: Rod jam nut included with cylinder.
Unique dual switch groove (CombiGroove ) designed to accept most T slot type switches as well as half-moon switches Brass female hexagon adjustment screw for end-of-stroke cushion Precise cushion adjustment
Mxp band cylinder MAXIMUM DURABILITY. N Internal Bearing S solid bearing P profiled rail.
Mxp band cylinder N Internal Bearing S solid bearing P profiled rail Contents Introduction..................... MXP_4 Comparison..................... MXP_5 N Internal Bearing Features...... MXP_6 S Solid
Heavy Duty Bench Top Presses
Heavy Duty Bench Top Presses Model: BTP-501 (FOR SINGLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Model: BTP-502 (FOR TRA TRIPLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Heavy Duty Bench Top Press shown
Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS
SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the
Catalog PAN2-2. II Air Cylinders. Pancake. Superior Interchangeable Industrial Air Cylinders
Catalog PN- Prices effective September 1, 011 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders 5-8-10 Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD
VOLUME 11. Rotary Actuators HYDRAULIC AND PNEUMATIC. w w w. m i c r o m a t i c l l c. c o m
VOLUME 11 Rotary Actuators HYDRAULIC AND PNEUMATIC w w w. m i c r o m a t i c l l c. c o m Welcome LP Models LOW PRESSURE PNEUMATIC 150 PSI 45 Standard Sizes 150 PSI Up to 570 in/lbs of of Torque Torque
Position Control System
Position Control System Products Cylinders 7.3-7.4 Cylinders Non-Contact 7.5-7.9 Cylinders 7.10-7.14 Cylinder Rod Lock 7.15-7.16 Cylinder Accessories 7.17-7.20 Pneu-Turn 7.21-7.29 Position Control System
RexMover Series 277 & 297 Rodless Shuttle Cylinder
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics RexMover Series 277 & 297 Rodless Shuttle Cylinder Catalog pages
Active and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Page Overview 51-52 Standard cylinder with Active brake 53-56 Plain bearing SLIDELINE with Active brake 33-34 Aluminium roller guide PROLINE
Series SS Solid Stainless Cylinders
Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O
Table of Contents General Specifications, Available Mountings... 1 Introduction... 2 Application Examples... 3 Features... 4 Theory of Operation... 5
With Continuous Position Feedback Catalog AU08-0971/NA September, 2002! Compact Design! Highly Accurate Position Feedback Capability! Electronic Controllers Available! 5 Bore Sizes Table of Contents General
HPS Powerslide-2 guided rodless cylinder
HPS Powerslide-2 guided rodless cylinder NEW SHOCK ABSORBER MOUNTING OPTIONS SEE PAGE 6 Introducing the Hepco HPS Powerslide-2 The original Hepco Powerslide was the first ever bearing-based guided rodless
SRX Series Stainless Steel Body Air Cylinders with Continuous Position Feedback
with Continuous Position Feedback P P1L SRX SR/SRM, SR/SRM Contents Features... 42 Cylinder Ordering Information... 43 Specifications... 44 Engineering Specifications... 45 imensions...46-50 Mechanical
Original & T Series 8 Bores, 1/2" 4" Features & Benefits General, Standard Specifications
Original & T Series 8 Bores, /2" 4" Section Index Features & Benefits....2 General, Standard Specifications....2 Page Construction Details....3,.4 How a Pancake is built Information....5,.6 How a Pancake
Linear drives SLG, flat design
Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design
VERSATILE THRUSTER PNEUMATIC SLIDE
S, SE VERSATILE THRUSTER PNEUMATI SLIE Major enefits Offered in short or long body an be ordered with standard or oversize shafts Standard dowel pin holes for ease of mounting Several switch options 5
The Product Range. Technical Data
The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various
CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES
HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC
The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS!
SERIES JHD HEAVY DUTY AIR CYLINDER The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS! The true test of a cylinder is how well it performs in your application.
E Series Economic Tie-Rod Cylinder Line
Series Economic Tie-Rod Cylinder Line www.numatics.com Table of Contents E Series Features and Benefits 3 How to Order 4 Basic E-Series Cylinders 5 Cushioned Cylinders 5 Basic E-Series Dimensions 5 E-Series
Rotary Vane Actuators
Rotary Vane Actuators Rotary Vane Actuators Unitized Body Turn-Act s patented extrusion combines tube, stator and bolt lobes into a one-piece unitized body. Unique design provides torsional rigidity allowing
E Series Economic Tie-Rod Cylinder Line
E Series Economic Tie-Rod Cylinder Line w w w. n u m a t i c s. c o m Table of Contents E Series Features and Benefits 3 How to Order 4 Basic E-Series Cylinders 5 Cushioned Cylinders 5 Basic E-Series Dimensions
Bimba Flow Controls. FQPS Series FQP & FCP Series. 3 For Technical Assistance: Controls. Flow. Thrusters. Linear.
Bimba Flow Controls FCP FQP Flow Controls Adjusting Needle 3-Stage Tapered Stainless Steel Needle Chrome Plated Banjo Connector Adjusting Needle 3-Stage Tapered Stainless Steel Needle Locknut Chrome Plated
Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting
CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,
Parallel Grippers. Features. Operation. Contents. Mounting
Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals
TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D
HEAVY-DUTY CATALOG FL-6-A FLAIRLINE FAST Shipped in - days THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING
Table of Contents R Series Features and Benefits
Table of Contents R Series..................................................................................... -8 Features and Benefits..................................................................................
Air-Oil Systems, Inc.
Table of Contents R Series..................................................................................... -8 Features and Benefits..................................................................................
Pneumatic Linear Slides
CATALOG LS-03 Prices Effective September 1, 2011 January 8, 2018 Pneumatic Linear Slides Product Index Introduction Engineering considerations for product selection...4-7 Quick reference guide to Fabco-Air
Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm
SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,