GLV SERIES PRESSURE RELIEF VALVES
|
|
- Jessica Elliott
- 5 years ago
- Views:
Transcription
1 GLV SERIES PRESSURE RELIEF VLVES
2 GLV SERIES TLE OF ONTENTS Relief Valves GLV-Series are spring loaded pressure relieving devices, suitable for discharge of incompressible fluids. GLV-series relief valves are used to protect personnel, equipment and environment by preventing excessive pressure accumulation. oi Technology offers a large range of screwed and flanged valves in a variety of sizes, materials and options. The valves are of a full nozzle type and available in Steel or plastic versions. ST. STEEL VERSION Introduction Page 1 DN15 Page 2-3 DN25 Page 4-5 DN40 Page 6-7 D DN50 Page - 9 F Page 11 pplication - hemical plants - Petrochemical plants - Dosing systems - Injections skids - Metering pumps - Water treatment and desalination plants - ryogenic plants (liquefied gases) Materials ISI 316L, Inconel, lloy 20, Hastelloy, Titanium, Duplex, Super duplex, Monel, other exotic materials are available. OPPER LLOY VERSION E Page PLSTI VERSION Introduction Page 13 DN15 Page DN25 Page DN40 Page 1-19 D DN50 Page Design - onstruction: - Seat sealing type: - onnections: - onnections types: - Flange ratings: - Sizes: - Orifices: - haracteristic: - Overpressure: - lowdown: - Discharge coeff. Kd: - Temperature range: - Set pressure range: - Design standard pprovals ngle-type PTFE, PEEK, Metal to Metal, Viton, Kalrez, EPDM Screwed and flanged (NSI / DIN) NPT, GS/SPP SME 2500 / PN16 PN 400 1/2 2 / DN 15 DN 50 6,,, 14, 20, 25, 30 Full lift % 15% barg UNI EN ISO E marking according to the dir. 2014/6/EU /34/EU (TEX) - E ( Eursian onformity mark (E, Russian: Евразийское соответствие) 1
3 TYPE HRTERISTIS Orifice ø / NPT / GS Flanged / SME # 2500# DN15/DN20 0 MTERILS INLET RF / RTJ OUTLET NPT / GS Flanged / SME # 600# DN15/DN20 THREDED RF 1/2 x 1/2 NPT-F / GS-F ,5 3/4 x 3/4 NPT-F / GS-F ,5 FLNGED 1/2 x 1/2 SME 300 x 300 SME 600 x 600 SME 0 0 x 600 SME 2500 x ,0 4,0 6,0 3/4 x 3/4 SME 600 x 600 SME 0 0 x 600 SME 2500 x ,5 6,5 7,5 DN15 x DN ,0 6,0 DN20 x DN ,5 6,5 7,5 2 3
4 TYPE MTERILS INLET OUTLET HRTERISTIS Orifice ø / 6 14 Discharge area / cm NPT / GS Flanged / SME - 1 # 2500# RF / RTJ DN15/DN NPT / GS Flanged / SME 1 # 600# RF DN25 THREDED 1/2 x 1 NPT-F / GS-F 37/42* ,5 3/4 x 1 NPT-F / GS-F 37/42* ,5 1 x 1 NPT-F / GS-F 37/42* ,5 * Orif ice. /14 FLNGED 1/2 x 1 3/4 x 1 1 x 1 DN15 x DN25 DN20 x DN25 DN25 x DN25 SME 600 x 600 SME 0 0 x 600 SME 2500 x 600 SME 600 x 600 SME 0 0 x 600 SME 2500 x 600 SME 600 x 600 SME 0 0 x 600 SME 2500 x ,5,0 5,5,0 5,5,0 5,5,0 5,5,0 5,5,0 4 5
5 TYPE MTERILS HRTERISTIS Orifice ø / 14 Discharge area / cm INLET /2 NPT / GS Flanged / SME 1-1 1/2 # 2500# DN25/DN40 0 OUTLET 1 1/2 NPT / GS Flanged / SME 1 1/2 # 600# DN40 NPT / GS # 2500# 0 NPT / GS # 600# NPT / GS # 2500# 0 NPT / GS # 600# THREDED 1 x 1 1/2 NPT-F / GS-F ,5 1 1/2 x 1 1/2 NPT-F / GS-F ,5 FLNGED 1 x 1 1/2" 1 1/2" x 1 1/2" DN25 x DN40 DN40 x DN40 Typ m m m SME 600 x 600 SME 0 0 x 600 SME 2500 x 600 SME 600 x 600 SME 0 0 x 600 SME 2500 x 600 PN x PN16 40 PN x PN16 40 PN 400 x PN ,5 9,5 9,5 9,5 6 7
6 TYPE D MTERILS HRTERISTIS Orifice ø / INLET 1 1/2-2 NPT / GS Flanged / SME 1 1/2-2 # 2500# DN40/DN50 0 RF / RTJ OUTLET 2 NPT / GS Flanged / SME 2 # 600# DN50 THREDED 1 1/2 x 2 NPT-F / GS-F 275 7,5 2 x 2 NPT-F / GS-F 275 7,5 RF FLNGED 1 1/2 x 2 SME 600 x 600 SME 0 0 x 600 SME 2500 x x 2 SME 600 x 600 SME 0 0 x 600 SME 2500 x DN40 x DN DN50 x DN
7 TYPE E TYPE F HRTERISTIS HRTERISTIS Orifice ø / Orifice ø / INLET INLET 3/ - 1/2 NPT / GS OUTLET 1/4-1/2 NPT / GS OUTLET 1/2 NPT / GS THREDED 3/ x 1/2 GS-F-M NPT-F-M 2 3, ,7 1/2 x 1/2 GS-F-M NPT-F-M 2 3, ,7 1/4-1/2 THREDED NPT / GS 1/4 x 1/4 GS-F/ NPT-F ,0 1/2 x 1/2 GS-F/ NPT-F 33,5 43,5 13 1,5 MTERILS MTERILS PRT NME MTERIL ODE NOZZLE RONZE ISI 316L 02 DIS RONZE/PTFE L/PTFE ISI 316L/PTFE 03 LOW. WSHER 04 STEM 05 SPRING ISI 316 ISI 316 ISI ONNET 07 GUIDE 0 SET SREW 09 P ODY 11 GSKET SILION VITON VITON 12 GSKET SILION VITON VITON 11
8 GLV SERIES Plastic Version Relief Valves GLV-Series PLSTI VERSION pplication - hemical plants - Petrochemical plants - Dosing systems - Injections skids - Metering pumps - Water treatment and desalination plants Materials PV, PV-, PP, PVDF, PTFE. Design - onstruction: ngle-type - Seat sealing type: PTFE - onnections: Screwed and flanged (NSI / DIN) - onnections types: GS / SPP - Flange ratings: SME 300 / PN16 PN 40 - Sizes: 1/2 2 / DN 15 DN 50 - Orifices:, 14, 20, 25, 30 - haracteristic: Full lift - Overpressure: % - lowdown: 15% - Discharge coeff. Kd: Temperature range: Set pressure range: barg - Design standard EN pprovals - E marking according to 2014/6/EU /34/EU (TEX) - E ( Eursian onformity mark (E, Russian: Евразийское соответствие) 13
9 TYPE MTERILS HRTERISTIS Orifice ø / INLET GS Flanged / SME # 300# DN15 - DN20 OUTLET GS Flanged / SME # 300# DN15 - DN20 THREDED 1/2 x 1/2 GS-F ,5 3/4 x 3/4 GS-F ,5 FLNGED 14 1/2 x 1/2 SME 300 x ,0 3/4 x 3/4 SME 300 x ,5 DN15 x DN ,0 DN20 x DN ,5 15
10 TYPE MTERILS HRTERISTIS Orifice ø / GS Flanged / SME - 1 # 300# DN15 DN25 14 INLET OUTLET 1 GS Flanged / SME 1 # 300# DN25 THREDED 1/2 x 1 GS-F ,0 3/4 x 1 GS-F ,0 1 x 1 GS-F ,0 FLNGED 16 1/2 x 1 SME 300 x ,0 3/4 x 1 SME 300 x ,0 1 x 1 SME 300 x ,0 DN15 x DN ,0 DN20 x DN ,0 DN25 x DN ,0 17
11 TYPE MTERILS HRTERISTIS Orifice ø / /2 GS / SPP Flanged / SME 1 1/2 # 2500# DN40 INLET OUTLET 1 1/2 GS / SPP Flanged / SME 1 1/2 # 300# DN40 THREDED 1 x 1 1/2 GS-F /2 x 1 1/2 GS-F FLNGED 1 x 1 1/2 SME 300 x /2 x 1 1/2 SME 300 x DN25 x DN DN40 x DN
12 TYPE D MTERILS HRTERISTIS Orifice ø / /2-2 GS / SPP Flanged / SME 1 1/2-2 # 300# DN40/DN50 INLET OUTLET 2 GS / SPP Flanged / SME 2 # 300# DN50 THREDED 1 1/2 x 2 GS-F x 2 GS-F FLNGED 1 1/2 x 2 SME 300 x x 2 SME 300 x DN40 x DN DN50 x DN
13 How to reach our ompany 1. Highway 1 (tangenziale Ovest) exit San Giuliano Milanese 2. proceed to Via della Liberazione OI TEHNOLOGY S.r.l. Via della Liberazione, 29/D 200 San Giuliano Milanese (MI) Italy Tel Fax info@coitech.it
SLK SERIES SAFETY VALVES
SLK SERIES SAFETY VALVES SLK SERIES TABLE OF CONTENTS Relief Valves SLK-Series are spring loaded pressure relieving devices, suitable for discharge of compressible fluids. SLK-series safety valves are
More informationGATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.
FORGED STEEL GTE VLVES LV-1 NOMINL PRESSURE NSI Class 150-1500 PN 16-250 NOMINL 1/4-2 DN 8-50 MTERILS Carbon Steel Low lloy Steel Stainless Steel CONNECTIONS Socket Weld Butt Weld Threaded Flanged XELVLVES
More informationModel SCV (Angle Body)
Model SV (ngle ody) Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications Features The standardized forged body and
More information197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
More informationBall Valves PSI
6.000-0 PSI Ball Valve Components 10 9 7 11 8 6 2 1 3 4 5 1 BILL OF MATERIALS 1 CLOSE FITTING AISI 316L 2 SEAL RINGS PTFE 3 BALL SEATS PEEK 4 VALVE BODY AISI 316L 5 BALL AISI 316L 6 PIN A4-70 7 GASKET
More informationSV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
More informationDiverter valves. Inspired By Challenge
Inspired y Challenge Floating all Valves General Piece Flanged Ordering code system Introduction are primarily used to split or combine process flows, or to switch medium among different pieces of process
More informationTABLE OF CONTENTS FORGING AHEAD OF THE REST
ORGED STEEL VLVES YO Valve Co., Ltd ddress: NO. 111, CaoliRoad, engjing Town,Jinshan District,Shanghai, China. TEL: 86-21-67360922 X: 86-21-67360966 Post Code: 201502 E-Mail: info@yaaovalve.com Website:http://www.yaaovalve.com
More informationSami Sami Instruments Instruments srl srl Instrumentation products Valves and manifolds 2008 Page 1 Contents Introduction Page 3 Standard Features Page 4 Coding system Page 5 Valves Page 8 ACCESSORI /
More informationBar stock check valve designed for operation with any fluid. MODEL SELECTION
MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. 10K psi ISI 316L* 19 60 1/4" NPT-F 1/4" NPT-F 03SV4N F51* 03V4N F55* 03EV4N LLOY 400* 03FV4N 276* 03GV4N 03HV4N I625* 03IV4N ISI 316L*
More informationT-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
More informationItem Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
More informationPhone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVi-05 Stainless Steel In-Line Adjustable Pressure Relief
More informationBC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
More informationBronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)
SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents ronze Gate Valves ontents Page Figure Number Index
More informationSafety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
More informationSV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
More informationValves and manifolds
Process industry We offer a wide range of accessories for various applications Stopcocks DIN valves Ball valves Bonnet version needle valves are available in various options, materials and connections.
More informationFLANGED BALL VALVES ASME CLASS 150 & 300
FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety
More information115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
More informationGACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150
CRBON STEEL / FULL BORE / DN 8 TO DN 150 Carbon steel, forged body full bore ball valve designed to international and European standards FETURES PPLICTIONS Saturated steam. mmonia, natural gas, propane
More information966SRL 966SBL Nominal size A B C D Weight Red Lever Blue Lever in mm mm mm mm kg Product Code Product Code
D rass Full ore FIG 966SRL and 966SL WRS Valves Lockable lever as standard 966SRL 966SL Nominal size D Weight Red lue in mm mm mm mm kg Product ode Product ode 4 4.4 44.7 90 8 0.7 784204 78408 8 45.4 47.8
More informationApplication: Process Gases Solutions
Process Gases Gases are used in chemical and industrial processes, such as analytical instrumentation, environmental compliance, electronic manufacturing, chemical production, reference gases, and medical
More informationSeries Pressure Relief Valves 197C
Series 2700 Pressure Relief Valves 197C Table of Contents General Description...IFC Ordering Information & Numbering System...1 Bill of Materials-Conventional...2 Bill of Materials-Balanced Design...3
More informationType 437. Type 437. Available designs. Cap H2 Adjusting screw with bushing. Axial needle 69 beering. Lock nut. Spring plate. Spring plate. Pin.
Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring 2 Outlet body 17 Spring plate 57 Pin 61 Ball 7 Disc 1 Body Threaded
More informationARMATUREN TYPE ISO-STANDARD A. Plug valve with chemical-resistant vacuum-proof lining DN / PN NPS ½ - 12 / class
TYPE ISO-STNDRD Plug valve with chemical-resistant vacuum-proof lining DN 15-300 / PN 10-40 NPS ½ - 12 / class 150-300 RMTUREN free of cavity & maintenance 2.1 free of cavities Maintenance free and self
More informationModel RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
More informationSpring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
More informationResilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
More informationResilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
More informationHELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
More informationPhone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-05-NPT Stainless Steel Back Pressure Regulator Valve
More informationPeter Meyer Ball valves Cryogenic
Peter Meyer Ball valves Cryogenic Features Swiss manufacturer One-piece body design Laser welded, whitout body seal Chambered seats Cryogenic extension Cavity pressure relief system Replaceable packing
More informationGhibson Italia s.r.l. via Cassola 6/ Monteveglio (BO) Italy. Check valves
disc type GA - GB Series 1 GA 015 1 GB 015 - GB 019 2 GB 021 - GB 02 head losses 4 temperature/pression 4 GN - GT Series 5 GN 011 - GN 015 - GN 115 5 GT 011 - GT 015 - GT 115 5 head losses 6 temperature
More informationPage 1 Worldwide Rev e
Worldwide Page 1 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling
More informationTOSACA. Catalogue
Catalogue 2016-1 INDEX / INDICE 1216 1400 EN/DIN flanges 1216 pag. 2 1216 HP pag. 3 1400 pag. 6 1216 C pag. 4 1216 B pag. 5 1400 LP pag. 8 1415 ASME flanges Accesories 1415 pag. 9 1415 LP pag. 11 pag.
More informationSpecial Kv available. Classification according pressure equipment Directive, 2014/68/UE
SELF-OPERATED PRESSURE REGULATORS PRESSURE REDUCING VALVE MODEL PRV45 PRODUCT FEATURES Self-actuating pressure reducing valve balancing by diaphragm used to provide a constant downstream still there being
More informationInstrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve positioned in the flow stream to allow or prevent the flow (ball or tip); 2. Stem: part which connects the obturator
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
More informationHigh pressure valves. Inspired By Challenge
Inspired By Challenge Floating Valves High pressure General Series 7 Series 8 Series Introduction Ordering code system The Habonim high pressure valve series is based on a floating ball valve technology,
More informationManufacturing Standards
HEK VLVE heck Valve pplication Swg check valves are designed to close quickly and automatically with positive shut off either horizontal or vertical (flow up) pipe runs. Inherently, swg check valves have
More informationcheck Butterfly valves soft seated Butterfly valves Ptfe seated Butterfly valves for hot air/smokes double eccentric Butterfly valves BOLOGNA
check valves check valves disc CheCk valves series GA - GB - Gh - GN - GT swing CheCk valves series Gs swing check valves series gs bi-directional type swing check valves series gs dimensions from 2 to
More informationRS Series. Three way rotary valves for temperature control systems
RS Series Three way rotary valves for temperature control systems R S RS Three way rotary valve for temperature control systems RS 3-way rotary valve for temperature control systems High Efficiency Mixing
More informationValves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationButterfly Valves. Quality Valves at Low Cost
utterfly Valves Quality Valves at ow Cost bout Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and gas,
More informationINTRODUCTION XV-0P XV-1P XV-2P XV-3P. Summary: Displacements - Pressures - Speeds XV-0P XV-1P XV-2P XV-3P
TROUTION XV-0P XV-1P XV-2P Summary: isplacements - Pressures - Speeds XV-2P XV-1P XV-0P Type isplacement Max. Pressure Min speed Max speed XV-0P/0.17 0.16 cm 3 /rev 260 bar 700 rpm 9000 rpm XV-0P/0.25
More informationINSTRUMENTATION - valves
Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear
More informationCrosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
More informationMonoblock DBB. Page 1
Monoblock DBB Page 1 Page 2 Ball bore size 10 mm Ball and Bleeder Bleeder Antitamper ( optional ) Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend
More informationLESLIE DESUPERHEATERS SIZES 1/2" 16" ANSI Class 150 to 2500
LINER LESLIE DESUPERHETERS SIZES 1/" 16" NSI Class 150 to 500 Fabricated and forged constructions High quality stuffing box Variable nozzle type Wide range of Cv (Kv) capacities available Special nozzle
More informationFORGING AHEAD OF THE REST
Bonney orge The Name You Trust for orged Steel Valves Bonney orge's forged steel valves and piping components have led the way for over eighty years in state-ofthe-art design and dependable performance.
More informationPhone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05-FLG PRESSURE RELIEF VALVE FLANGED 150#, 300#,
More informationCrosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationMonoflanges. Page 1. Rev. 0-0
Monoflanges Page 1 Rev. 0-0 2016 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
More informationModel 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.
More informationCRYOGENIC. Italian Manufactured, Italian Quality
Italian Manufactured, Italian Quality CRYOGENIC Via Di Vittorio 307/25-20099 Sesto San Giovanni (MI) - Italy Tel: +39.028.976.1628 - Fax: +39.028.976.2167 www.sestovalves.com - sales@sestovalves.com Introduction
More informationInspired By Challenge. Three piece ball valves
Inspired By Challenge Three piece ball valves Floating Valves General Fire safe Graphite-free fire-safe Ordering code system Introduction Habonim -piece ball valves 7 series Habonim line of -piece ball
More informationFILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2
FILTER, REGULTOR ND FILTER/REGULTOR Stainless Steel L Compact /, High Flow / - / FETURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment and suitable for use in
More informationTECHNICAL BULLETIN. Valtek Multi-Z Anti-Cavitation Control Valve. Experience In Motion. Valtek Series Multi-Z FCD VLENTB /10
TECHNICAL BULLETIN Valtek Multi-Z Anti-Cavitation Control Valve FCD VLENTB1631-00 06/10 Experience In Motion 1 Index Section Features... 2 Specifications... 3 Principal design... 4 Principle of cavitation
More informationF84L & F88 Series Spring-Operated Liquid Service Pressure Relief Valves
THE NEXT GENERATION F84L & F88 Series Spring-Operated Liquid Service Pressure Relief Valves Catalog# F84L1296REVC0916 EXPERTS IN SOFT SEAT VALVE TECHNOLOGY CONTENTS INTRODUCTION AND FEATURES SECTION Introduction
More informationVALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationquick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
More informationInstrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve posioned in the flow stream to allow or prevent the flow (ball or p); 2. Stem: part which connects the obturator
More informationPOWER APPLICATION SSR-S1000
POWER APPLICATION SSR-S1000 and SSR-S1100 COMPANY PSV is a company of PARCOL and SVC. PSV was founded in 2016 with the target of creating a flexible and high quality safety valve company. PSV combines
More informationDMI Young & Cunningham Valve Manufacture and Supply
DMI Young & Cunningham Valve Manufacture and Supply DMI Group Company DMI Young & Cunningham Ltd DMI Young & Cunningham Ltd West Chirton Industrial Estate Gloucester Road North Shields Tyne and Wear NE29
More informationFood & beverage. Oil & gas. Water & waste water
Overview MSS 2100 MC1 DN 50 to DN 150 (2 to 6 ) are suitable for accurate mass flow measurement for all kind of liquids and gases. The sensor offers superior performance in terms of flow accuracy, turn-down
More information/ Catlg.Val Nacional-16pg-ING indd 1 7/11/16 11:13
3-5111 / 3-5161 The Company Production, R+D+i, evolution. VALVULAS NACIONAL, S.A. was established in Spain in 1976. The main target was to assist the petrochemical and chemical industries emerging in Spain
More informationPalanca manual Lifting device. Obturador o-ring Disc o-ring 28 Soft seat Viton / PTFE Metal. Inlet Outlet Orifice Area A B C Weight
Model 1216F TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation EN-4126-1 / 7 Connections Threaded BSP / NPT Design EN-12516-1, EN-4126-1 / 7 Rating PN-40 DIN 259 and
More informationPressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
More informationControl Valve GS 3 series 1/2 up to 10. material
Control Valve 8021 GS 3 series 1/2 up to 10 Pneumatic control valve with integrated positioner for the control of neutral and aggressive fluids. Ideal for steam and flashing liquids. Integral top mount
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
More informationModel 1415 TOSACA TECHNICAL DATA SHEET. Construction and materials. Technical information
Model 1415 TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation API RP 520 Connections Flanged ASME/ANSI B16.5 Design / Size API STD 526, ASME Section VIII Rating 150#/300#
More information94D / 94F / 94M / 96M
94D / 94F / 94M / 96M - 2016 1 Meter Runs MBL 500 Application Meter runs combine inlet and outlet piping with a flow element which is used for flow measurement of one-phase aggressive and non-aggressive
More informationVisual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Material Pipe Operating Operating Page
Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Pipe Operating Operating Page O.D. x s Pressure Temperature Plastic thread 10 25670 PVDF 63.0 x 3.6 2.5-10 thread max. 140 C 61 Plastic
More informationLow temperature and cryogenic valve solutions. Fast track delivery. Special materials. Special design
> Upstream > Midstream > Downstream > Chemical valve applications Fast track delivery Special materials Special design Low temperature and cryogenic valve solutions Your reliable valve partner Red Point
More information1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler Material Maximum working pressure Test pressure Minimum Burs Pressure uminium 16 bar / 232 psi 24 bar / 348 psi 80 bar / 1160
More informationDirect-operated, Back Pressure Regulating Valve. Features
MK508BPM Series Direct-operated, Back Pressure Regulating Valve The MK508BPM series are spring loaded, self actuated, direct-operated, valves. Pressure relief valves are used to protect the system from
More informationEHP Series Piston Accumulators. 0.1 to 1000 Litres, up to 350 bar (as standard)
EHP Series Piston ccumulators 0.1 to 1000 Litres, up to 350 bar (as standard) Description The EHP piston accumulators are manufactured in arbon & Stainless Steel and are available with a wide range of
More informationFlush tank valves. Inspired By Challenge
Inspired By Challenge Floating Ball Valves General standard TuBore Ordering code system Introduction The Habonim Flush Tank series incorporates all the advantages of the -piece ball valve 7 series and
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More informationSpring-assisted, Non-slam, Axial Flow, Silent Check Valves
DFT s family of In-Line Check Valves are available in a variety of designs: Basic-Check Restrictor Check SCV SCV-R Vacuum Breaker DLC BNCTM Excalibur GLC GLC -Cast Iron PDC DSV ALC FBC WLC WLC -Cast Iron
More informationHIGH PERFORMANCE SEGMENTED V-BALL CONTROL VALVE
HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE GENERL INFORMTION HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE High Rangeability: 300:1 Turn down ratio Flow haracteristic: Equal Percentage Low Pressure Recovery Rate:
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
More informationBLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
More informationIFC Series DR Retainerless Dual Disc Check Valves
IF Series DR Retainerless Dual Disc heck Valves 6 1 2 3 4 9 7 8 5 10 Design Features Retainerless design meets industry fugitive emissions control requirements. This design eliminates the potential leak
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationNELES RA SERIES V-PORT SEGMENT VALVE
NELES R SERIES V-PORT SEGMENT VLVE Metso's Neles V-port valve in the R-series is primarily intended as a control valve, but it can also be used for shut-off service. The R-series V-port segment valve is
More informationModulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
More informationKB Series self averaging pitot flowmeter for gas, liquids and steam flows
process measurement solutions K Series self averaging pitot flowmeter for gas, liquids and steam flows Data sheet IP371 Advantages of the K series Description Patented square sensor design - reliable accuracy
More informationCipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
More informationSeries 2371 Pressure Regulators Excess pressure valves for the food and pharmaceutical industries
Series 2371 Pressure Regulators Excess pressure valves for the food and pharmaceutical industries Type 2371-00 Pneumatic set point adjustment Type 2371-01 Manual set point adjustment pplication Excess
More informationG03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head
G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump
More informationIntroduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
More informationVALVULAS. Modelo 215V, 337 Sección VIII, Vacío De Asme Aire/Gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV'
VLVULS Modelo 215V, 337 Sección VIII, Vacío De sme ire/gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV' Descripciones Modelo Model 337: Tiene dispositivo para la elevación 'tirar-anillo'
More informationManifolds WAY MANIFOLDS. Instrument valves & manifolds
Manifolds WY MNIFOLDS Instrument valves & manifolds OVERVIEW STV offers a broad line of 1,2,3,4 and 5-way instrument manifolds, all available in a wide range of materials and fully compatible with the
More information