Manufacturing Standards
|
|
|
- Bryce Neal
- 6 years ago
- Views:
Transcription
1 HEK VLVE heck Valve pplication Swg check valves are designed to close quickly and automatically with positive shut off either horizontal or vertical (flow up) pipe runs. Inherently, swg check valves have a low pressure drop and are best suitable for velocity applications. Our closure design allows our swg check valve to close completely even and rema closed with no flow when stalled a horizontal pipe run. Manufacturg Standards General Design Pressure Ratg Face to Face Flange uttweld End Inspection and Test PI 00 (Swg heck Valves) PI 59 (Wafer heck Valves) PI 0 (Forged Steel Valves) SME / NSI. SME / NSI.0 SME / NSI.5 SME / NSI.5 PI D / PI 59 and onnection Standard bodybonnet jots of gate valves are connected by studs and nuts and are mached as follows: PRESSURE LSS 50 & & bove JOINT DESIGN Malefemale Malefemale/Rg type jot Rg type jot Each disc s seatg surface is precision ground and mated to the seat rg for surance of a positive shut off. The disc is secured to the hge arm with the disc nut and pned to prevent disengagement durg service. Seat rgs are designed to greatly reduce and/or prevent any turbulence and avoid damages due to the corrosion. Seat rgs for gate valves are typically made from forged steel. Standard Parts & Material PRT NME W Series 0 Series Series & rm W 05 / Fa 5F 5F F0 F0L GSKET TYPE Spiral wound metal with Graphite Spiral wound/rg jot metal Rg jot metal rm E ye olt End onnections Our standard end connection produce valves with: Flange end type with Raised Face (), Flat Face (FF) or Rg Type Jot (RTJ) that conform to NSI.5. uttweldg ends (W) that conform to NSI.5. Threaded ends (NPT) that conform to NSI.. socket weld ends that conform to NSI. ll facetoface/endtoend dimensions conform to NSI.0. Other special end connections are supplied accordg to customer s requirements. 5FM 5FM F FL rmo(v) Series W5 9 5 Fa L, L Series 5L 5L Fa r / r 0 / 0 Sealg Material HF / 0 / 0 / 0 / HF / r HF / HF HF / Monel HF / 0 HF / HF / HF / HF / HF / HF / Monel ackseat Fa F0 F F0L FL Fa Fa Nut 9H 9 9M 9H 9H Spiral Wound + Graphite / Rg Jot Metal on special request Nut Nut Split P 5
2 ST STEEL SWING HEK VLVE LSS 50 SWING HEK VLVE ast steel swg check valves, olted cover, Horizontal or vertical les. Designed to PI 00 Standard Parts & Material Fig. rm Eye olt Nut Nut Spli t P Hge rm Nut olt Nut MTERILS + r 05 + r/stl Fa 9H Spiral Wound + Graphite 9 9H W Valve enter to Top (H) pproximate Weight Workg Pressure: arbon Steel 5 00 F / LSS 00 SWING HEK VLVE ast steel swg check valves, olted cover, Horizontal or vertical les. Designed to PI 00 Standard Parts & Material Fig. rm Eye olt Nut Nut Split P Hge rm Nut olt Nut MTERILS + r 05 + r/stl Fa 9H Spiral Wound + Graphite 9 9H W Valve enter to Top (H) pproximate Weight Workg Pressure: arbon Steel 00 F /
3 ST STEEL SWING HEK VLVE LSS 00 SWING HEK VLVE ast Steel Swg heck Valves, olted cover, Horizontal or vertical les. Designed to PI 00 rm E ye olt St ud Nut Dis c Nut Split P Standard Parts & Material Fig. Hge rm Nut olt Nut MTERILS + r 05 + r / STL Fa 9H Rg Jot Metal 9 9H W Valve enter to Top (H) pproximate Weight 5 Workg Pressure: arbon Steel 0 00 F / LSS 900 SWING HEK VLVE ast steel swg check valve, olted cover, Horizontal or vertical les. Designed to PI 00 rm Sea t Rg Eye olt Nut Dis c Nut Spli t P Standard Parts & Material Fig. 9 Hge rm Nut olt Nut MTERILS + r 05 + r / STL Fa 9H Rg Jot Metal 9 9H W Valve enter to Top (H) 0 pproximate Weight 0 Workg Pressure: arbon Steel 00 F /
4 FORGED STEEL HEK VLVE Forged steel piston and swg check valve, olted cover, Regular & full port, Threaded and socket weld ends. Standard Parts & Material F, F5 NO. 5 9 ap olt Hge Nameplate MTERILS Graphite Staless Steel Piston Type Manufacturg Standards General Design Pressure Ratg Face to Face Screwed Ends (NPT) Socket Weld Ends Inspection and Test PI 0 NSI. NSI.0 NSI. NSI. PI 59 Swg Type LSS 00 HEK VLVE Regular Port Full Port Face to Face () Valve enter to Top () Seat Port () pprox. Weight /. / / / / /../ 0.5 Designed to PI 0././ / Workg Pressure: arbon Steel F / LSS 500 HEK VLVE Designed to PI 0 Regular Port Full Port Face to Face () Valve enter to Top () Seat Port () pprox. Weight /. / / 0.5 / /. / Workg Pressure: arbon Steel 5 00 F /./ 5 0.././ 0 0../
5 FORGED STEEL HEK VLVE LSS 50/00/00 HEK VLVE Designed to PI 0 Forged steel piston and swg check valve, olted cover, Regular port, Flanged ends. Standard Parts & Material Fig. F, F, F NO. 5 9 ap olt Hge Nameplate MTERILS Graphite Staless Steel Piston Type Manufacturg Standards General Design Pressure Ratg Face to Face Screwed Ends (NPT) Socket Weld Ends Inspection and Test PI 0 NSI. NSI.0 NSI. NSI. PI 59 Swg Type Regular Port Face to Face () lass 50 lass 00 lass 00 Valve Height () Seat Port Diameter (D) lass 50 pprox. Weight lass 00 lass 00 Workg Pressure: arbon Steel lass F / lass F / lass F / / / /
6 F LO W D IR E T I ON WFER HEK VLVE ast steel wafer check valve, Dualplate design, Long leg sprg action Eye olt Plug earg Stop P Standard Parts & Material Fig.,, Plate Seat Sprg Stop P MTERILS r/ss0/ss una N/Viton r/ss0/ss Inconel X50 Fa/SS0/SS Fa/SS0/SS NOTE: Other valve material composition are available LSS 50 WFER HEK VLVE pproximate Weight / 5 5/ 0 5/ Length Workg Pressure: arbon Steel 5 00 F / / / / 5 Design to PI 59/PI D / / / LSS 00 WFER HEK VLVE pproximate Weight / Length Workg Pressure: arbon Steel 00 F / / / 5 Design to PI 59/PI D 50 5./ / / / / 55 LSS 00 WFER HEK VLVE Design to PI 59/PI D pproximate Weight 0 5 5/ Length Workg Pressure: arbon Steel 0 00 F / 9 0 / / / / 5 9./ / 50
7 F LO W D IR E T I ON WFER HEK VLVE ast steel wafer check valve, Dualplate design, Long leg sprg action Eye olt Plug earg Stop P Standard Parts & Material Fig. 9, 5 Plate Seat Sprg Stop P MTERILS r/ss0/ss una N/Viton r/ss0/ss Inconel X50 Fa/SS0/SS Fa/SS0/SS NOTE: Other valve material composition are available LSS 900 WFER HEK VLVE Design to PI 59/PI D pproximate Weight 5 / 90 / Length Workg Pressure: arbon Steel 00 F / 0 0./ / 5 59./ 5./ 5 5./ 95 9./ / / 95 LSS 500 WFER HEK VLVE Design to PI 59/PI D pproximate Weight 5 / 90./ Length Workg Pressure: arbon Steel 5 00 F / / / 5 59./ 0 5.5/ 5 5./ / / 0 LSS 500 WFER HEK VLVE Design to PI 59/PI D pproximate Weight 5 9./ Length 5 5 Workg Pressure: arbon Steel 5 00 F / / /
AN ISO 9001 : 2008 COMPANY SWING CHECK VALVE. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 COMPNY SWING CHECK VLVE Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TECH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 14 16 18 20
AN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD
FORGING AHEAD OF THE REST
Bonney orge The Name You Trust for orged Steel Valves Bonney orge's forged steel valves and piping components have led the way for over eighty years in state-ofthe-art design and dependable performance.
TABLE OF CONTENTS FORGING AHEAD OF THE REST
ORGED STEEL VLVES YO Valve Co., Ltd ddress: NO. 111, CaoliRoad, engjing Town,Jinshan District,Shanghai, China. TEL: 86-21-67360922 X: 86-21-67360966 Post Code: 201502 E-Mail: info@yaaovalve.com Website:http://www.yaaovalve.com
IFC Series DR Retainerless Dual Disc Check Valves
IF Series DR Retainerless Dual Disc heck Valves 6 1 2 3 4 9 7 8 5 10 Design Features Retainerless design meets industry fugitive emissions control requirements. This design eliminates the potential leak
YSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
SMITH VALVE. The Solid Collection. High Pressure Integral Flanged Gate, Globe & Check Valves
SMITH VALVE The Solid Collection The Longest Lastg Le of Integrally Flanged, Round Bolted RTJ Bonnet, Full Bore, Gate, Globe & Check Valves High Pressure Integral Flanged Gate, Globe & Check Valves Flanged
Forged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500
Forged Steel olted & Welded onnet Gate Valves s: 1/4 thru 3 Pressure lass: 150 thru 4500 Manufactured by Newmans Rev: 052109 13 Typical Newco Forged Steel olted & Welded onnet Gate Valve Expanded View
CHECK valve SPECIFICATION. glt valves CHECK VALVE APPLICATION MANUFACTURING STANDARDS
CECK VAVE APPICATION SPECIFICATION Sometimes referre to as non-return valve, check valves prevents back-flow, constantly keeping flow in one irection. Check valve are esigne to close quickly an automatically
SMITH VALVE. The Solid Collection. High Pressure Integral Flanged Gate, Globe & Check Valves
SMITH VALVE The Solid Collection The Longest Lastg Le of Integrally Flanged, Round Bolted RTJ Bonnet, Full Bore, Gate, Globe & Check Valves High Pressure Integral Flanged Gate, Globe & Check Valves Flanged
9800 Series. Metal to Metal Trunnion Ball Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STNRS PI 6 certified SM / NSI 16.10 PI 6F, PI 607, 4th dition Wall thickness complies to 16.34 esigned to SM / NSI 16.5, 16.10, 16.34, 31.1, 31.4 and 41.8 standards N MR 0175 compliance 9800 Series Metal
BC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
TECHNICAL DATASHEET DUO-CHEK High Performance Non-Slam Check Valves
brands you trust. TEHNIL DTSHEET DUO-HEK High Performance Non-Slam heck Valves Retainerless heck Valves Style H High Performance heck Valve for ritical pplications For critical applications, Duo-hek Retainerless
General Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS
General Purpose all Valves RTIFID TO ISO 92 QULITY STNDRDS VOP- ON-PI RDUD PORT GNRL PURPOS LL VLV 4 2 (8 mm) RON OR STINLSS STL ODY, RPTF STS FIGUR NUMR RON = S-L2-SSG F8M = S-L-SSG STNDRD MTRILS PRT
FLANGED BALL VALVES ASME CLASS 150 & 300
FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety
GATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.
FORGED STEEL GTE VLVES LV-1 NOMINL PRESSURE NSI Class 150-1500 PN 16-250 NOMINL 1/4-2 DN 8-50 MTERILS Carbon Steel Low lloy Steel Stainless Steel CONNECTIONS Socket Weld Butt Weld Threaded Flanged XELVLVES
CHECK VALVES. Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. CHECK VALVES Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc. Swing Check Valves
Tilting Disc Check Valve
Figures 123 123½ Tilting heck Valve lass 150 olted ap Figure 123 Figure 123½ utt Weld 2 through 36 inches (50-900 mm) STM 216 Grade W 285 psi @ -20 F to 100 F (20 bar @ -28 to 37 ) of onstruction* Inlet
WKM Valves Triple Offset Valves
WKM Valves Triple Offset Valves High-quality, bidirectional valves for critical applications in demanding markets ontents Triple offset geometry.......................................... 3 Major markets...................................................
Air and Vacuum Sewer Valves. Stainless Steel Trim Standard. Short Air & Vacuum Sewer Series
ir and Vacuum Sewer Valves ir and Vacuum Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable
Modulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
Vanessa Series 30,000 Triple Offset Valves* Cryogenic Configuration
* ryogenic onfiguration virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations Features General applications
Wafer check valve AxiaI flow check valve
Your Professional Valve Solution Wafer check valve AxiaI flow check valve Tipvalve is specialized dustrial valves production, research and development, sales and service. Offer the valve solution rigorous
Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
Stainless Steel Trim Standard. ir and Vacuum Sewer Valves permit a large volume of air to
ir and Vacuum Sewer Valves Valve Functio n Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable in sizes thru 10 ll
G Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
Butterfly Valves. Quality Valves at Low Cost
utterfly Valves Quality Valves at ow Cost bout Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and gas,
FEATURES. 3 position models can be equipped with special 180 operators offering two 90 steps.
2" 8" (DN 50 200) OTTOM PORTED 3-WY FLNGED LL VLVES Jamesbury bottom ported 3-way ball valves provide a variety of flow paths not commonly found in other 3-way designs.the basic design is suitable for
Titan Flow Control, Inc. Your pipeline to the future!
Titan Flow ontrol, Inc. Your pipele to the future! Series F 75 Wafer > ast Iron Series F 76 ug > uctile Iron esigned accordance with: MSS-S-67 & I 609 olor oded: Orange ody is M Seat lue ody is una-n Seat
OSV. Forged Steel Valves Technical book OSV
OSV Forged Steel Valves Technical book OSV Principles Of Company General Introduction Company History About the company OS Valves (OSV) is a subsidiary of OS Company. OSV has been inspiring our employees
B1F. B Series Forged Brass Ball Valves 5.1
** Suitable for use with natural gas, manufactured gas and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof. Not for use on Sour Gas. Series Forged
arflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED. Gate, Globe & Check Valves.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED Gate, Globe & Check Valves. VALVITALIA VITAS DIVISION PLANT Some production example of Forged Steel Valves 2 Valves
SV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
Section 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
brands you trust. ALOYCO Corrosion Resistant Stainless Steel Valves Crane ChemPharma & Energy
brands you trust. LOYCO Corrosion Resistant Stainless Steel Valves Crane ChemPharma & Energy Key Features and pplications Key Features and enefits Full material offering including CF8M, CF3M, and CN7M
HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
KTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
Aloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves
loyco Corrosion Resistant s The First Name In Corrosion Resistant s Stainless Steel s General Index Figure No. Type Pressure Class End Connection Material vailable Size Range Catalog Page 0 Gate, RS 00
FLOATING BALL VALVE CATALOG
FLOTING LL VLVE TLOG www.walworthvalves.com INEX INTROUTION WLWORTH ENGINEERING ONTROL... 5 WLWORTH QULITY SYSTEM... 5 QULITY ONTROL EQUIPMENT... 9 FLOTING LL VLVES INTROUTION OF FLOTING LL VLVES...11
GLV SERIES PRESSURE RELIEF VALVES
GLV SERIES PRESSURE RELIEF VLVES GLV SERIES TLE OF ONTENTS Relief Valves GLV-Series are spring loaded pressure relieving devices, suitable for discharge of incompressible fluids. GLV-series relief valves
CAST STEEL CATALOG.
ST STEEL TLOG www.walworthmx.com INEX Introduction WLWORTH Engineering ontrol...5 WLWORTH Quality System...5 Quality ontrol Equipment...9 ast Steel Gate, Globe and Swing heck Valves ST STEEL OLTE ONNET
MODEL CB800 Circuit Balancing Valves
MOEL 00 ircuit alancing Valves VLVES & ESSORIES Model 00 ircuit alancing Valves are designed to achieve accurate and efficient balancing of hydronic heating or cooling systems. ircuit alancing Valves provide
Stainless & Exotic Alloy Valves Product Line Technical Data
Stainless & Exotic lloy Valves Product Line Technical ata orporate Headquarters ooper Valves Stafford, Texas 13127 Trinity rive Stafford, TX 7777 Tel: 281.302.900 Fax: 281.302.801 www.oopervalves.com Manufacturer
KO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
Corporate Overview... 2,3. How To Order Gate Valves Globe Valves Check Valves Cryogenic Valves...
FORGED STEEL VALVES Table Of Contents Corporate Overview... 2,3 How To Order... 4-8 Gate Valves... 9-14 Globe Valves... 15-22 Check Valves... 23-30 Cryogenic Valves... 31-40 Integral Flanged Valves...
Long thread stem nut to provide long thread life and permit the removal of hand wheel even at full open.
Design Feature Gate Valve O EMISSION FEATURE PEASE REFER PAGE:42 ong thread stem nut to provide long thread life and permit the removal of hand wheel even at full open. Spacer rg and sgle pac set for class
Cast Steel Tilting Disc Check Valve
ast Steel Tilting heck Valve Typical Tilting heck Valve Tilting heck Valves consist of a cylindrical housing, with a pivoted circular disc. The pivots are located just above the center of the disc, and
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
DONGKANG METAL DONGKANG MET
DONGKNG METL ontents 4 5 6 8 9 0 3 30 38 4 50 5 53 54 58 59 60 6 6 63 64 65 66 67 68 70 70 7 Message, Organization ompany History Machg & Facilities Machg & Testg Product Information Product Valve List
Model ZW204 Non-Modulating Float Valve
Model Z04 Non-Modulating loat Valve pplication The Zurn ilkins Model Z04 Non-Modulating loat Operated ontrol Valve is designed to be either fully open or fully closed in response to the position of the
PRESSURE SEAL CATALOG
PRESSURE SEL TLOG www.walworth.com 2 www.walworth.com INEX INTROUTION ENGINEERING ONTROL... 5 QULITY SYSTEM... 5 QULITY ONTROL EQUIPMENT... 9 GTE, GLOE, GLOE Y PTTERN, TILTING IS HEK, SWING IS HEK N LIFT
Cast Carbon and Low Alloy Steel Valves ASME Class 150 / 300 / 600 / 900 / 1500 / 2500 Gate, Globe and Check Valves, Bolted Bonnet Design
K-170=06 Cast Carbon and Low Alloy Steel Valves ASME Class 150 / 300 / 600 / 900 / 1500 / 2500 Gate, Globe and Check Valves, Bolted Bonnet esign ultimate performance and efficiency. Its ma feature is a
PRESSURE SEAL CATALOG
PRESSURE SEL TLOG For more detailed information, please visit our website: UNITE STTES TW The Valve ompany 13641 ublin ourt, Stafford, Texas 77477 Phone: (713) 996 9696 Toll free: (1 800) 697 1842 Fax:
Butterfly Valve - Series 200
utterfly Valve - Series 200 utterfly Valve design is the most common type of rotary valve and provides low weight to v Ratio combined with simplicity of design and comparatively low cost. It is a simple
Oilfield Products Composite Catalogue
VLVES N OILFIEL SUPPLIES Oilfield Products omposite atalogue SHORT VERSION FST TRK SUPPLY ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS
Forged Steel Valve CATALOG.
Forged Steel Valve TLOG www.walworthvalves.com INEX INTROUTION FORGE STEEL VLVES... 11 OY MTERILS... 12 TRIM RRNGEMENTS... 16 OMMON ONSTRUTION MTERILS OMINTION... 18 FORGE STEEL GTE, GLOE N SWING VLVES
FEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PW Series igh Performance Wafer Style utterfly Valve The PW is a high performance wafer style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range
brands you trust. ALOYCO Corrosion Resistant Stainless Steel Valves
brands you trust. LOYCO Corrosion Resistant Stainless Steel s Key Features and pplications Key Features and enefits Full material offering including CF8M, CF3M, and CN7M (lloy 20) road pressure classes
Features and Description of Edward Univalve Globe Valves
Features and Description of Edward Univalve Globe Valves 7. 8. 9. 1 10. 2. 11. 12. 3. 4. 5. 6. 1. Stem has ACME threads, is ground to a fine finish and is hardened to resist wear. 2. Yoke bushing material
Model SCV (Angle Body)
Model SV (ngle ody) Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications Features The standardized forged body and
GTW 3-WAY CONTROL VALVE SIZES 1/2" 12" ANSI CLASS 125/250, 150/300
GTW ONTROL VLVE PPLITION DT Process control systems for food, pulp and paper, chemical, petrochemical & other industries HV systems Feed water and fuel system controls in boiler rooms Packaged systems
GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005
GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w
HANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
VANESSA SERIES 30,000 TRIPLE OFFSET VALVES* CRYOGENIC CONFIGURATION
VNESS SERIES 30,000 TRIPE OFFSET VVES* RYOGENI ONFIGURTION virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations
VALVULAS. Modelo 215V, 337 Sección VIII, Vacío De Asme Aire/Gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV'
VLVULS Modelo 215V, 337 Sección VIII, Vacío De sme ire/gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV' Descripciones Modelo Model 337: Tiene dispositivo para la elevación 'tirar-anillo'
ilent Silent Operation Proven Performance Cost Effective Silent Check Valves Check Valve
ulletin / Silent Operation Proven Performance Cost Effective ilent Check Silent Check s www.valmatic.com Certified Lead-Free NSF/NSI & 7 Certified Feature Highlights Threaded C F C Globe F C E Wafer F
D I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
Bolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
Quick-Fit Ducting 2018 Price Catalog
QF Quick-Fit Ductg 2018 Catalog Pricg effective February 1, 2018 Made the US DuctgSystems.com Nordfab Ductg The World s Fastest Ductg Nordfab s Quick-Fit (QF ) is The World s Fastest Ductg every aspect
HIGH PERFORMANCE SEGMENTED V-BALL CONTROL VALVE
HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE GENERL INFORMTION HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE High Rangeability: 300:1 Turn down ratio Flow haracteristic: Equal Percentage Low Pressure Recovery Rate:
Pneumatic process valve, Y-pattern with pneumatic actuator of stainless steel DN 15-50
with pneumatic actuator of staless steel Pneumatic process valve, Y-pattern with pneumatic actuator of staless steel DN 15-50 ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets Piston actuator
Titan Flow Control, Inc. Your pipeline to the future!
TITN Titan Flow ontrol, Inc. Your pipele to the future! eries F 75 Wafer > ast Iron eries F 76 ug > uctile Iron esigned accordance with: M--67 & I 609 olor oded: Orange ody is M eat lue ody is una-n eat
Quick-Fit Ducting September 2018 Price Catalog
QF Quick-Fit Ductg September 2018 Catalog 888-372-0050 x3 Sales@IndustrialirPurification.com Made the US www.nordfab-us.com 800-532-0830 Nordfab Ductg The World s Fastest Ductg Nordfab s Quick-Fit (QF
MILLCENTRIC B ALANCING PLUG VALVE
ISO 9001 ertified MILLNTI LNING PLUG VLV alancing Service egulation of multi-circuit chilled water and hot water systems is essential to achieve design performance. MILLNTI valves have excellent throttling
HANCOCK 600 GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK 600 GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
MAX NON-SHOCK WORKING PSI TEMPERATURE PSI 150 F F 190. A (in) B (in) C (in) D (in) E (in) Cv*
OY ST IRON L. SET STINLESS T04 PLUG STINLESS T04 4 SPRING STINLESS T04 SREW STINLESS T04 SEE THE VNE FLEX T MX NON-SHOK TEMPERTURE PSI 50 F 00 00 F 90 LE FREE to avoid flow turbulence. The intake side
Vogt Valves Catalog and Application Manual VVENCT
Vogt Valves Catalog and Application Manual VVENCT0000-06 Experience In In Motion Motion Vogt Valves, Sulphur Springs, TX Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early
F-17 CATALOG. Forged Steel Valves
F-17 CATALOG Forged Steel Valves Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early development of ammonia absorption refrigeration systems that made artificial ice. This business,
Series 7100 Flow-Lift Piston Check Valve
Series 7100 Flow-Lift Piston Check Valve Award-Winning Design: Feature-packed valve provides solutions for gas, air or liquid systems The Norriseal Series 7100 Piston Check Valve* is designed for the prevention
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Sizes ½"-36" Pressures Class Figure 150
Standard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections
Standard-Low Emission Valves to 100 PPM Cast Steel Valves 150 2500 ASME; Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End Connections;
Vogt Valves The Connection Bulletin for Forged Steel Globe Valves for Water-Free Chlorine Service Class 300, 600 & 800 CB 07
The Connection Bulletin for Forged Steel Globe Valves for Water-Free Chlorine Service Class 300, 600 & 800 CB 07 Forged Steel Globe Valves for Water-Free Chlorine Service Flow Control Division Forged Steel,
Order code information
3 Piece Threaded High Pressure Fire-Safe all Valves Order code information 1.1 3 piece threaded fire-safe ball valves ody Rating Shell Material Valve ore nd onnection Trim Material Firesafe Seat & Seal
ROBERT H. WAGER COMPANY. Installation, Operation and Maintenance Guide. Models 1500/1500-MC 1700/1750
ROERT H. WGER COMPNY Installation, Operation and Maintenance Guide Models 00/00-MC 00/0 MODELS 00/00-MC/00/0 Installation, Operation and Maintenance Guide Robert H. Wager Company, Inc. 0 Montroyal Road
Cast Steel. Carbon and Stainless Steel Gate, Globe and Check Valves
Cast Steel Carbon and Stainless Steel Gate, Globe and Check Valves Contents Cast Steel Standard Features 3 Testing, Modifications and Accessories Standard Product Range With DSI Zy-Gear Bevel Gear Chart
D I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
T 8075 EN Type 3591 Globe Valve ANSI version
T 8075 EN Type 3591 Globe Valve ANSI version Application Matenance-friendly cage valve for process engeerg applications with high dustrial requirements Valve size NPS 10 to 32 Pressure ratg to 900 Temperatures
Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
VISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
SERIES 493, 493 Section 34 Page 34. TBLE OF CONTENTS Features & Benefits...2 Specifications...2 Standard Materials of Construction...2 Key...3 Cutaway View & Pump Features...3 Mountg Options...4 Dimensions
Pressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
DOMIZI CHAMBER FOR LEVEL INSTRUMENTS Model : DBH-SO and DBH-WN
DOMIZI HAMBR FOR LVL INSTRUMNTS Model : DBH-SO and DBH-WN The DOMIZI hambers allow to link different level instruments (guided wave radar, torsion bars etc..) to the process, providing various benefits
GWC Italia. Proven technology for individual valve solutions worldwide CAST STEEL VALVES GATE, GLOBE & CHECK CSV-1004
GWC Italia Proven technology for individual valve solutions worldwide CAST STEEL VALVES GATE, GLOBE & CHECK CSV-1004 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide
FEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PL Series igh Performance Lug Style utterfly Valve The PL is a high performance lug style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range of