Bronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)
|
|
|
- Kevin May
- 6 years ago
- Views:
Transcription
1 SETION 2a ronze Gate Valves Tel: +44 (0) Fax: +44 (0)
2 ontents ronze Gate Valves ontents Page Figure Number Index 2 ronze Gate Valves Introduction 3 The Pressure Equipment Directive 4 ronze Gate Valves Data Sheets 5-12 Fig No Page 33X 5 33XLS LS LS PN In this catalogue we have endeavoured to make the information as accurate as possible, and we cannot accept any responsibility should it be found that in any respect the information is inaccurate or incomplete or becomes so as a result of further developments. 2
3 Introduction ronze Gate Valves ll Hattersley bronze gate valves are inside screw pattern with either rising stem or non-rising stem configuration. The majority of the range have a threaded bonnet but union bonnet valves are available. Valve bodies, with the exception of the DZR range, are made from bronze castings and have integral seating surfaces. Valves are fitted with asbestos-free gland packing as standard. The SI Kitemark against a figure number in the table below indicates that all or part of that range is Kitemarked to the relevant ritish Standard. The WRS pproved Product Mark against a figure number indicates that all or part of that range has been independently assessed and certified under the Water Regulations dvisory Scheme and is listed in the Water Fittings and Materials Directory. $ WRS pproved Product * Kitemarked to the relevant ritish Standard Fig No PN Series End Size onnet Wedge Rating onnections Range Pattern Material 35PN16$ 16 Flanged mm Threaded ronze 30*$ 16 ompression 15-54mm Threaded ronze 30LS*$ 16 ompression 15-54mm Threaded ronze 30*$ 20 Threaded 1/ 4-3in Threaded DZR lloy 30LS*$ 20 Threaded 1/ 4-3in Threaded DZR lloy 33X*$ 20 Threaded 1/ 4-4in Threaded ronze 33XLS*$ 20 Threaded 1/ 4-4in Threaded ronze 33* 32 Threaded 1/ 4-3in Threaded ronze Threaded 1/ 4-2in Union ronze Threaded 1/ 2-3in Threaded ronze Threaded 1/ 4-3in Threaded ronze 3
4 The Pressure Equipment Directive ronze Gate Valves Fig. No. PN(PS) DN Fluid Group (1) ategory 30/30LS L SEP 30/30LS 20 1/ 2 "-2" 2G SEP 1/ 4 "-2" 2G SEP 33X/33XLS 20 21/ 2 "-4" 2G 1 (2) 1/ 4 "-11/ 4 " 2G SEP / 2 "-3" 2G 1 (2) 1/ 4 "-11/ 4 " 2G SEP / 2 "-2" 2G 1 (2) / 2 "-3" 2L SEP G SEP G 1 (2) / 4 "-3" 2G SEP FLUID GROUPS 2G = Group 2 gases (lso Group 2 liquids but NOT group 1 gases nor Group 1 liquids) 2L = Group 2 liquids only TEGORY SEP = Sound Engineering Practice I = ategory I (E Marked) 4
5 Fig. 33X - 33XLS ronze Gate Valves PN20 - Series SEN12288 PN20 Series 9 bar at 180º 20 bar from -10 to 100º Shell: 30 bar Seat: 22 bar Material omponent Material S EN ody ronze K onnet ronze K Stem (1/ 4 to 2in) DZR rass W602N (21/ 2 & 3in) rass W614N (4in) Manganese ronze Disc ronze K Packing sbestos Free Packing Gland (1/ 4 to 3in) rass W614N (4in) ronze K Gasket (3 & 4in) sbestos Free Kitemarked to S EN WRS pproved Product Non-rising stem Threaded bonnet One piece wedge S21 Taper thread (ISO 7) vailable with NPT thread (33XT) 1/2 to 4 vailable with lockshield (33XLS) up to 2 Nominal Size in 1/ 4 3/ 8 1/ 2 3/ / 4 11/ / mm mm mm D mm Weight kg X D 33XLS 5
6 Fig LS DZR Gate Valves PN20 - Series SEN12288 PN20 Series 9 bar at 180º 20 bar from -10 to 100º Shell: 30 bar Seat: 22 bar Kitemarked to S EN WRS pproved Product Non-rising stem Threaded bonnet One piece wedge S21 Taper thread (ISO 7) vailable with lockshield (30LS) vailable with NPT thread (30T) Material omponent Material S EN STM Stem DZR opper lloy W602N - Gland Packing sbestos Free Stem Ring DZR opper lloy W602N - onnet DZR opper lloy W602N - ody DZR opper lloy W602N - Disc DZR opper lloy W602N - Nominal Size in 1/ 2 3/ / 4 11/ 2 2 mm mm mm D mm Lockshield Key Fig Ref Weight kg E 30LS 6
7 Fig LS DZR Gate Valves PN16 Pressure bar Temperature Material omponent Material S EN STM ody ronze Disc ronze Stem ronze or onnet ronze or Packing PTFE or PTFE/Neoprene Gland rass Packing Nut rass / Handwheel ast Iron Handwheel Nut Steel ompression Olive rass ompression Nut rass (for liquid service) 5 bar at 120º 6 bar at 110º 10 bar at 65º 16 bar from 2 to 30º Shell: 24 bar Seat: 17.6 bar Kitemarked to S EN WRS pproved Product Non-rising stem Threaded bonnet One-piece wedge ompression ends to S EN Suitable for copper pipe to S EN 1087:Table X vailable with lockshield (30LS) Nominal Size mm mm mm mm D mm E mm F mm Lockshield Key Fig No Ref Weight kg F 30 E D F 30LS 7
8 Fig. 33 ronze Gate Valves PN32 - Series S5154 PN32 Series 14 bar at 198º 32 bar from -10 to 100º Shell: 48 bar Seat: 35.2 bar Kitemarked to S EN Non-rising stem Threaded bonnet One piece wedge S21 Taper thread (ISO 7) vailable with NPT thread (33T) 1/2 to 3 Pressure bar Saturated Steam Temperature Material omponent Material S EN STM Stem ronze K 62 Gland Packing sbestos Free Stem Ring rass W614N onnet (1/ 4 to 2in) rass W617N 124 lloy 2 (21/ 2 & 3in) ronze K 62 ody ronze K 62 Wedge ronze K 62 Nominal Size in 1/ 4 3/ 8 1/ 2 3/ / 4 11/ / 2 3 mm mm mm Weight kg
9 Fig. 669 ronze Gate Valves PN32 Series SEN12288 PN32 Series 14 bar at 260º 32 bar from -10 to 120º Shell: 48 bar Seat: 35.2 bar Material omponent Material S EN ody ronze K onnet ronze K Stem ronze K Disc ronze K Packing sbestos Free Gland rass W614N Packing Nut rass W614N Handwheel luminium Handwheel Nut rass W614N S EN Rising stem Union bonnet One piece wedge Taper thread (ISO7-1) vailable with NPT thread (669T) Nominal Size in 1/ 4 3/ 8 1/ 2 3/ / 4 11/ 2 2 mm mm mm Weight kg
10 Fig. 28 ronze Gate Valves - Lever Operated 8.6 bar WP 4 bar at 150º 8.6 bar cold (non-shock) Shell: 12.5 bar Seat: 12.5 bar Threaded cover S21 Taper thread (ISO7-1) Lever operated Material omponent Material S EN STM Stem Stainless Steel X8rNiS18-9 ISI 420 Gland Packing sbestos Free Stuffing ox rass W614N Gate ronze K 62 Disk rm ronze K 62 ody ronze K 62 Nominal Size in 1/ 2 3/ / 4 11/ / 2 3 mm mm mm Weight kg
11 Fig. 35PN16 ronze Gate Valves PN16 Series Pressure bar Saturated Steam Temperature Material omponent Material S EN Stem (15 to 50mm) DZR opper lloy W602N Stem (65 to 100mm) ronze K Gland Packing sbestos Free Stem Ring (15 to 80mm) rass W614N (100mm) ronze K onnet (15 to 50mm) ronze K (65 to 100mm) ronze K ody ronze K Wedge ronze K Nominal Size mm mm mm mm D mm Weight kg S5154 PN16 Series 7 bar at 170º 16 bar from -10 to 100º Shell: 24 bar Seat: 17.6 bar WRS pproved product Non-rising stem Threaded bonnet One piece wedge Flanged to S4504 PN16 Table E and F vailable with lockshield (35LS) vailable with position indicator and locking device (35PN16LDI) in all sizes except for 32, 65 and 100mm. D 11
12 Fig. 609 ronze Gate Valve PN32 - Series 14 bar at 198º 32 bar from -10 to 100º Test Pressure Each valve is individually hydrostatically tested to S EN at the following test pressures. Shell: 30 bar Seat: 22 bar Rising stem Threaded bonnet One piece wedge ronze trim Taper thread S EN (S 21-ISO 7) omplies with S EN Pressure bar Saturated Steam Temperature Material omponent Material S EN ody ronze K onnet ronze K Stem (1/ 4 to 2 ) ronze K (21/ 2 ) L. rass (12) W301G (3 ) ronze K Disc ronze K Packing Ring sbestos Free WRS Listed & pproved Gland rass W614N Packing Nut (21/ 2 & 3 ) rass W721R Packing Nut (1/ 4 to 2 ) rass W614N Handwheel luminium Identification Plate luminium Handwheel Nut rass W614N Nominal Size in 1/ 4 3/ 8 1/ 2 3/ / 4 11/ / 2 3 mm Open mm mm Weight kg
Bronze Y Type Strainers
SETION 9a Bronze Y Type Strainers Tel: + ()95 7 Fax: + ()95 72 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents and Numerical Index Bronze Y Strainers ontents Page Figure Number
Project Valves Technical Data
Project Valves Technical ata Project Valves Technical ata ontents Introduction 1 ominator Z3000 2-4 alancing Valves 5-15 Gate Valves 16-34 Globe Valves 35-40 heck Valves 41-47 all Valves 48-58 utterfly
966SRL 966SBL Nominal size A B C D Weight Red Lever Blue Lever in mm mm mm mm kg Product Code Product Code
D rass Full ore FIG 966SRL and 966SL WRS Valves Lockable lever as standard 966SRL 966SL Nominal size D Weight Red lue in mm mm mm mm kg Product ode Product ode 4 4.4 44.7 90 8 0.7 784204 78408 8 45.4 47.8
Hattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
Butterfly Valves. SECTION 8a. Tel: +44 (0) Fax: +44 (0)
SECTION a Butterfly Valves Tel: + ()195 7 ax: + ()195 7 Email: sales@hattersley.com export@hattersley.com www.hattersley.com Contents and Numerical Index Butterfly Valves Contents Page igure Number Index
FUTURE VALVE TECHNOLOGY
WTER HETING VENTILTION IR CON GS FUTURE VLVE TECHNOLOGY Export Product Range alancing Valves Traditional Valves INTRODUCTION bout Hattersley The origins of Hattersley date to 1897, when 20 year-old Richard
1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
Forged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500
Forged Steel olted & Welded onnet Gate Valves s: 1/4 thru 3 Pressure lass: 150 thru 4500 Manufactured by Newmans Rev: 052109 13 Typical Newco Forged Steel olted & Welded onnet Gate Valve Expanded View
Technical Product Guide
ISSUE 2 WTER HETING VENTILTION IR CON GS FUTURE VLVE TECHNOLOGY Technical Product Guide New Now includes Hook-Up II alancing Valves Traditional Valves Public Health Range INTRODUCTION bout Hattersley The
B1F. B Series Forged Brass Ball Valves 5.1
** Suitable for use with natural gas, manufactured gas and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof. Not for use on Sour Gas. Series Forged
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
Aloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves
loyco Corrosion Resistant s The First Name In Corrosion Resistant s Stainless Steel s General Index Figure No. Type Pressure Class End Connection Material vailable Size Range Catalog Page 0 Gate, RS 00
brands you trust. ALOYCO Corrosion Resistant Stainless Steel Valves Crane ChemPharma & Energy
brands you trust. LOYCO Corrosion Resistant Stainless Steel Valves Crane ChemPharma & Energy Key Features and pplications Key Features and enefits Full material offering including CF8M, CF3M, and CN7M
Gate Valves Globe Valves Check Valves. The Valve Experts IRON VALVES
Gate Valves Globe Valves Check Valves The Valve Experts IRON VLVES Iron Valves Index General Data... 5 Materials... 6 Pressure/Temperature Ratings... 7 C V Coefficients... 8 Gate Section... 9 Globe Section...
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
Technical Product Guide
ISSUE 1 WTER HETING VENTILTION IR CON GS FUTURE VLVE TECHNOLOGY Technical Product Guide New Now includes Hook-Up II alancing Valves Traditional Valves Public Health Range INTRODUCTION bout Hattersley The
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
brands you trust. ALOYCO Corrosion Resistant Stainless Steel Valves
brands you trust. LOYCO Corrosion Resistant Stainless Steel s Key Features and pplications Key Features and enefits Full material offering including CF8M, CF3M, and CN7M (lloy 20) road pressure classes
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
Conex Bänninger Gate Valves
Gate Valves Range Conex Bänninger Gate Valves Conex Bänninger Gate Valves are used for permitting or preventing flow and are best used in systems that require infrequent use of the valve. When fully open,
Conex Bänninger Gate Valves
Gate Valves Range Conex Bänninger Gate Valves Conex Bänninger Gate Valves are used for permitting or preventing flow and are best used in systems that require infrequent use of the valve. When fully open,
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
SV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
YSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
Bronze Valves. Gate Valves Globe Valves Check Valves
ronze Valves Gate Valves Globe Valves heck Valves ronze Valves Index ross Reference... 2 General Data... 3 Materials... 4 Ratings... 5 Pressure/Temperature Ratings and Flow Data... 6 ronze Valve Selection
SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
P R E S S - F I. Hattersley Press-Fit Valves
Look n P R E S S - F I 0 Hattersley Press-Fit Valves o F urther T V L V E S Hattersley Press-Fit Valves 02 D Hattersley has designed a dedicated core range of Press-Fit valves, which are quickly and easily
TOTAL PRODUCT O U R G E N I U S I S V A L V E S & P I P E F I T T I N G S W A T E R H E A T I N G V E N T I L A T I O N A I R C O N G A S
TOTAL PRODUCT C A T A L O G U E W A T E R H E A T I N G V E N T I L A T I O N A I R C O N G A S BALANCING VALVES BALL VALVES BUTTERFLY VALVES CHECK VALVES DRAIN COCKS GATE VALVES GLOBE VALVES PIPE FITTINGS
TABLE OF CONTENTS FORGING AHEAD OF THE REST
ORGED STEEL VLVES YO Valve Co., Ltd ddress: NO. 111, CaoliRoad, engjing Town,Jinshan District,Shanghai, China. TEL: 86-21-67360922 X: 86-21-67360966 Post Code: 201502 E-Mail: info@yaaovalve.com Website:http://www.yaaovalve.com
Knife gate valves Index
Index General information page Introduction 144 Product information page ast Iron/SS; Uni-directional 146 ast Iron/SS; i-directional; Throught conduit 147 ast Iron/SS; i-directional 148 ast Iron/SS; Silo
GATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.
FORGED STEEL GTE VLVES LV-1 NOMINL PRESSURE NSI Class 150-1500 PN 16-250 NOMINL 1/4-2 DN 8-50 MTERILS Carbon Steel Low lloy Steel Stainless Steel CONNECTIONS Socket Weld Butt Weld Threaded Flanged XELVLVES
Cast Iron Valves. JIS 5K/10K, Class 125
Valves JIS K/K, Class STNDRD PRODUCTION RNGE Valve Type Nominal Pressure Fig. No. Construction (Note) Page Gate valves JIS K JIS K JIS K JIS K JIS K K Class Class Class Class FCM FCL FCLS FCLU FCWI FCHI
G Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
AN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD
DP27, DP27E, DP27G, DP27R and DP27Y Pilot Operated Pressure Reducing Valves with SG Iron Bodies
Page 1 of 9 TI-P470-01 H Issue 4 DP27, DP27, DP27G, ISO 9001 DP27R and DP27Y Pilot Operated Pressure Reducing Valves with SG Iron odies ert. No. LRQ 0963008 Description The pilot operated pressure reducing
GP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
Sempell Dewrance Parallel Slide Gate Valves High pressure Cast Steel
High pressure and temperature parallel slide gate valve. The eyelet follower (conduit) design provides long reliable service life and allows for high seat velocities without detriment to service life.
WAFER BUTTERFLY VALVE
WAFER BUTTERFLY VALVE model 1123 Size: DN 32/40 to DN 1200 Ends: Between flanges PN 10/16, Class 150 up to DN 600 Min Temperature: -10 C Max temperature: +110 C (130 C temporarily) Max pressure: 16 Bars
Self-Acting Temperature Control Valve
GLOE & NEELE Northeast ontrols Inc. Tel: 8454183435 Fax: 8455952471 www.dwyerstore.com Selfcting Temperature ontrol Valve Require No External Power Selfcting Temperature ontrol Valves require no external
CONTENTS. Bronze Ball Valve (Threaded) 1. Bronze NRS Gate Valve (Threaded) 2. Bronze RS Gate Valve (Threaded) 3. Bronze Swing Check Valve (Threaded) 4
CONTENTS Bronze Ball Valve (Threaded) 1 Bronze NRS Gate Valve (Threaded) 2 Bronze RS Gate Valve (Threaded) 3 Bronze Swing Check Valve (Threaded) 4 Bronze Globe Valve (Threaded) 5 Bronze Y - Strainer (Threaded)
BRONZE FITTINGS. Class 125 (150) For steam, water, gas, oil and air service Standard specifications PRICING FILE AVAILABLE ONLINE
NIPPLES & FITTINGS RONZE FITTINGS U L UL842, UL258, UL125, Class 125 (150) For steam, water, gas, oil and air service Standard specifications Materials - STM 62-93 (85,5,5,5) C83600 PRICING FILE VILLE
BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
BC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
Union County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Iron swing check valves. 3. Iron gate valves. 4. Iron globe valves. B.
Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
Soft sealing gate valves F4-F5 PN16. TYPE 02400/BV Soft sealing gate valve F4-F5 PN16
SLES SERVICE +8 (0)7 6 info@econosto.fi TYPE 000 DN0-0 TYPE 000 DN0-00 Soft sealing gate valves Nominal diameter options (DN) 0-00 Nominal pressure options (PN) 6 TYPE 000/BV-0-7 Soft sealing gate valve
Maintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN
Type Series Booklet 7150.1/9-10 BOA -H Maintenance-free metal-seated globe valves with bellows Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN 15-350 Nodular cast iron PN 25 DN 15-150 Applications
CONTENTS. Double Flow Measurement Device 1. Fixed Orifice Double Regulating Valve 3. Variable Orifice Double Regulating Valve 7
CONTENTS Double Flow Measurement Device 1 Fixed Orifice Double Regulating Valve 3 Variable Orifice Double Regulating Valve 7 Flow Measurement Graphs for Fixed Orifice Devices 9 for Variable Orifice Devices
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
Vanessa Series 30,000 Triple Offset Valves* Cryogenic Configuration
* ryogenic onfiguration virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations Features General applications
General Data... 5 Materials... 6 Pressure/Temperature Ratings... 7 C V
CRNE Iron Valves Iron Valves Index General Data... 5 Materials... 6 Pressure/Temperature Ratings... 7 C V Coefficients... 8 Gate Section... 9 Globe Section... 25 Check Section... 30 Technical Data...
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
Bronze valves Brass valves
Bronze valves Brass valves for Building and General Industry Export Department Ph:403.255.8722 Fax:403.255.8798 Email:info@banffvalve.ca Fig. BB11 ast Bronze Gate Valve PN16 lass 125 / Non - rising stem,
Figure 1710 Flow Data
AHEAD OF THE FLOW Figure 1710 Flow Data Circuit Balancing Valve Why balance your system? Whether a system is designed for heating or chilling it must be properly adjusted and balanced for optimum design
RS Series. Three way rotary valves for temperature control systems
RS Series Three way rotary valves for temperature control systems R S RS Three way rotary valve for temperature control systems RS 3-way rotary valve for temperature control systems High Efficiency Mixing
KO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
MINIMATIC COMPACT - COMPETITIVE - FLOW CONTROL NORTHVALE KORTING LTD
MINIMTI OMPT - OMPETITIVE - FLOW ONTROL NORTHVLE KORTING LT MINIMTI ontrol Valves range of compact, lightweight, low cost control valves for use on liquid steam or gas applications. vailable in 2 way and
Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
GATE VALVES S 38 APPLICATION
APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids,
VALVES WITH UV ELECTRIC ACTUATOR
505-507 VALVES WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 505+UV and 507+UV cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
ADCATROL PNEUMATIC CONTROL VALVES PV16 ON-OFF (V16 globe valves series with linear actuators PA series)
TROL PNEUMTIC CONTROL VLVES PV16 ON-OFF (V16 globe valves series with linear actuators P series) DESCRIPTION The PV16G ON-Off valves are single seated, two-way body constructed with in-line straight connections.
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
SPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves
Page 1 of 10 Cert. No. LRQ 0963008 ISO 9001 SPIR-TROL DN15 to DN100 LE, LF and LL Two-port Control Valves TI-P303-11 CH Issue 2 Description SPIR-TROL is a range of two-port single seat globe valves with
Two port valves. pneumatically actuated
Two port valves pneumatically actuated One valve - The Spirax Sarco range of KE valves and PN5000 and PN6000 pneumatic actuators are designed to give a comprehensive selection of control valves for use
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
Type K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong
PN 16 100 Gate Valve Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300, F: +420 225 371 325 E: info@mpowergroup.eu,
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
Henderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
Contents. The Company Page 4. Female Lever Valves Page 5. Female Gate Valves Page 6. Bronze Gate Valves Page 7. Angle Valves Page 8-9
VALVES CATALOGUE Contents The Company Page 4 Female Lever Valves Page 5 Female Gate Valves Page 6 Bronze Gate Valves Page 7 Angle Valves Page 8-9 Float Valves Page 10-11 Foot Valves Page 12 Spring Check
Product Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
Valves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
gunric product selector gunric product selector
gunric product selector gunric product selector gunric valves is a proud member of the avk group 2 GUNRIC PRODUCT SELECTOR Gunric Product selector south africa Gunric Valves is a leading manufacturer and
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
VANESSA SERIES 30,000 TRIPLE OFFSET VALVES* CRYOGENIC CONFIGURATION
VNESS SERIES 30,000 TRIPE OFFSET VVES* RYOGENI ONFIGURTION virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations
Hopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20
Hopkinsons SCHEDULE OF SHELL BOILER MOUNTINGS Quality assurance Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
KTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids
KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of
Model SCV (Angle Body)
Model SV (ngle ody) Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications Features The standardized forged body and
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
VALVES WITH UM ELECTRIC ACTUATOR
505-507 VALVES WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 505+UM and 507+UM cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
ACE VALVE COMPANY LIMITED
Gate & Globe Valves ACE COMPANY LIMITED ttp://www.acevalve.co.kr Mangdeokri, Juchonmyun, Gimhae, Gyeongnam, Korea. TEL +000 FAX +0~ Email acevalve@acevalve.co.kr omepage www.acevalve.co.kr 0.0. ACE CATALOG
FORGING AHEAD OF THE REST
Bonney orge The Name You Trust for orged Steel Valves Bonney orge's forged steel valves and piping components have led the way for over eighty years in state-ofthe-art design and dependable performance.
Series 36-WW COMBINATION AIR VALVES DATA AND SIZING WASTEWATER SERVICE. (Single Body Style) Installation. Specifications. Purchase Specification
Series -WW COMINTION IR S DT ND SIZING WSTEWTER SERVICE (Single ody Style) Stainless Steel T Trim Standard Stainless Steel Floats Guaranteed Fully Ported s - No Restrictions Engineered For Drip Tight Seal
Gate, Globe & Check Valves Corrosion-resistant
Gate, Globe & Check Valves Corrosion-resistant ASME Class 0 to 00 " - " (0 mm - 00 mm) API 0, ASME B. L&T Valves Trusted by the industry for over five decades, L&T Valves offers innovative products and
FLAT WEDGE GATE VALVE zgat
FT WEDGE GTE VVE zgt body material grey cast iron nodular cast iron max. working pressure PS* K PS bar PS 1,6 bar M PS 2, bar N PS,0 bar -1 max. temperature ex.index 120 C * depending on FETURES face-to-face
CONTROL VALVES W910 Series
ONTROL ompact ontrol Valve Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel ompany Models W910, W910, W910, W910T, W910EP,
Materials : Cast iron
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanges ISO PN16-10 C + 300 C Max Pressure : 16 Bars Specifications : Rising rotating stem and handwhell Bolted bonnet and gland packing
MALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T
MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
Your Global Source for Today s Most Popular Solenoid Valves
lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International
Maintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1-10 BOA-H R Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN
UREA SERVICE FORGED VALVES
UREA SERVICE FORGED VALVES 288 UREA SERVICE VALVES 289 UREAvalves DROP CHECK VALVE UREA SERVICE PN325 1/2 to 2 DOUGLAS CHERO DROP CHECK VALVE UREA SERVICE DROP CHECK VALVE UREA SERVICE PN325 : PN325 Drop