Diverter valves. Inspired By Challenge

Transcription

1 Inspired y Challenge

2 Floating all Valves General Piece Flanged Ordering code system Introduction are primarily used to split or combine process flows, or to switch medium among different pieces of process equipment such as pumps, filters, or whole pipelines. provide reliable high flow rates in the most severe operating conditions including vacuum conditions. They can also handle highly viscous media without the need for constant back-flushing. The diverter valves are available with different ball designs to accommodate a wide range of flow patterns. These flexible flow combinations reduce the number of valves in a system, thereby saving costs and facilitating easier control. ecause the body Face-to-Face dimensions of diverter valves are identical to those of standard two-way valves, changeover between the two configurations is relatively easy. Technical summary D7/S7 series Size range Pressure range Size range Pressure range End connections D/D/S/S series Size range Pressure range End connections Temperature range Materials Operation Service Standards of compliance ottom or side entry, -piece diverter valve (standard and full port) /"- " (DN - DN0) NSI Class 600 Vacuum 0-6 Tor to 0 bar (00 psi) /"-6" (DN6 - DN0) NSI Class 00 Vacuum 0-6 Tor to 0 bar (7 psi) Threaded, welded, Flanged ottom or side entry, diverter Flanged valve (standard port) /"- 8" (DN - DN00) NSI Class 0/00 Vacuum 0-6 Tor to 0 bar/0 bar (90 psi /7 psi) Flanged -60 C to +0 C (-76 F to +6 F) Stainless steel CF8M/CFM,79 6/6L, lloy C, alloy C76 and more Lever or gear operated, pneumatic or electric actuated Chemical, petrochemical, oil and gas, energy, pharmaceutical, food & beverage Factory certification ISO Quality management system Valve design & tests SME 6. :0 Valve design PI 6D / ISO :007 ISO79 :00 NSI.0.:0 NPT - National Pipe Taper thread EN 06-:00, ISO 7-:007, JIS 00:999 SPT - ritish Standard Pipe Taper thread DIN8:0 SPP NSI 6.:06, EN 760:06 Socket weld end connection SME 6.-07, EN67:999 uttweld end connection (Schedule, 0, 0, 80) SME 6.:07, EN 09 -:997 Flanged dimensions SME 6.0:07, EN 8:07 Face-to-Face dimensions NCE MR-07:0 /ISO 6 -:0 Materials for use in H S-containing environments in oil and gas production NCE MR00/ISO 79:0 Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments EN 66-, PI 98 Testing of metallic valves - Pressure tests, test procedures and acceptance criteria. PI 607:06, ISO 097:00 Testing of valves - fire type-testing requirements ISO 88-:0 Industrial valves - measurement, test and qualification procedures for fugitive emissions Certifications PED 0/68/EU Module H Pressure equipment directive TEX 0//EU Equipment and protective systems intended for use in potentially explosive atmospheres (optional for actuated unit only) IEC 608-/:00 SIL/ Safety integrity level - Functional safety of electrical/electronic/programmable electronic safety-related systems (optional for actuated unit only) Documentation EN 00:00././. Metallic materials - types of inspection documents

3 General Design features Durable polymer anti-abrasion ring HermetiX stem seal Durable polymer thrust seal Seat-seal one pcs design various ball configurations to support different flow conditions ody Three piece design Forged or cast body Full compliance with SME 6. (wall thickness) Easy in-line serviceable with swing-out body Large range of end connections for full or standard port valves Rugged top mounting platform compliant with ISO for easy mounting of actuator and other accessories all various configurations Mirror polished solid ball High flow capacity with low pressure drop at full opening Floating ball concept for positive shutoff Stem One piece solid stem lowout proof design ntistatic device Stem seal HermetiX ISO 88- certified High endurance up to 00 thousand cycles nti-abrasion mechanism Live loaded Seats and seals Seats and seals one piece integral design Low torque Rate leakage tightness

4 Floating all Valves General Piece Ordering code system Flanged Three piece S7 series - Side Entry Rotation: 90 D7 series - ottom Entry Rotation: 90 D7 series - ottom Entry Rotation: 80

5 General D & S Series S / S series - Side Entry Rotation: 90 D / S series - ottom Entry Rotation: 90 D / D series - ottom Entry Rotation: 80

6 Floating all Valves General Piece Flanged Ordering code system Size - DN8-DN6 Class 600 () D7X/D7P () Series Valve dimensions S H D C ø all port K Preparation for actuation ø all port P P TxL thread F PCD ½, ¾ & ½ without nut - ½ with nut ø W M Stem flats show valve ball position N thread Std. port Full port all Unit port all port C D H K S W M N P F TxL Weight kg/lb DN8 mm (F0) /8 UNF MX0 / inch DN DN0 mm (F0) /8 UNF MX0 / /8" inch DN0 DN mm (F0) /8 UNF MX0 / /" inch DN DN0 mm (F0) /6 UNF MX0 " /" inch DN DN mm (F0) /6 UNF MX0 / " inch DN0 DN mm (F0) /6 UNF M6X / / inch DN0 DN0 mm (F0) /6 UNF M6X " / inch DN6 DN0 mm (F07) /6 UNF M8X / " inch Kv Cv 6

7 Size - DN8-DN6 Class 600 () D7X/D7P () Series Components & materials a ody CF8M, 6 WC, CN7M, 9 M-, 9 CW-MW, 9 CX-MW CKMCuN, 99 CDMN 99 CEMN Ends CFM, 6 WC, 0, CN7M, 9 M-, 9 CW-MW, 9 CX-MW CKMCuN, 99 CDMN 99 CEMN all CF8M, 7 N N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 Stem 79 6L, 6 Gr.60 H0D 7-PH, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 * Seat PTFE (), TFM (), RPTFE (), CF PTFE (), PEEK, CF PEEK, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) 6* ody seal () PTFE, RPTFE, UHMWPE, Graphite, VITON, NR, HNR 6*** Support ring 79 6L, 7 N N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** nti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin 8 0 9* Stem seal CF PTFE, TFM, Graphite () () D7P Series is Habonim's standard valve design without the HermetiX stem seal construction () This material can only be used as part of the D7P design () This material is available as standard as Seat-Seal one piece construction, No seal code require () One body seal is used in case of Seat-Seal one piece construction (item #), otherwise three body seals are used () /" (DN6)size maximum pressure rating is Class Follower 78 6L, 6 N000 Disc spring PH Stem nut EN , 9 Gr 8M Locking clip 67 0 Handle C.St. 9 G000 Zinc plated, 0 0 Serrated washer Handle nut 9 Gr 8M, EN Sleeve PVC 8 ody bolt EN / -80, 9 Gr 7 Zinc plated, 9 Gr 8M Zinc plated 8 ody bolt EN / -80, 9 Gr 7 Zinc plated, 9 Gr 8M Zinc plated 9 ody nut EN 06-, 9 Gr H Zinc plated, 9 Gr 8M 0 nti static spring 0 nti static plunger 79 0 Tag (not shown) 67 0 * Repair kit components ** Only with HermetiX stem seal *** Only with graphite body seal 7

8 Floating all Valves General Piece Flanged Ordering code system Size - 6 DN80-DN0 Class 00 D7X/D7P () Series Valve dimensions S D H C ø all port K ø all port Preparation for actuation P ø W Stem grooves show valve Q M ball position M TxL thread F PCD N thread N thread M DD Square Std. Full Unit all all Weight Kv C D H K S W M N P F TxL port port port port kg/lb Cv DN80 DN6 mm " (F0) M0x0 " /" inch UNS DN00 DN80 mm " (F0) M0x0 " " inch UNS DN00 mm " (F0) M0x0 " inch UNS DN0 mm /"- 6.0 (F) Mx0 6" inch UNF

9 Size - 6 DN80-DN0 Class 00 D7X/D7P () Series Components & materials a ody CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN Plug CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN all CF8M, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 Stem 79 6L, 6 Gr 60 H0D 7-PH, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 * Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) 6* ody seal PTFE, RPTFE, TFM, UHMWPE, Graphite 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** nti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin 8 0 9* Stem seal CF PTFE, TFM, Graphite () () D7P Series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the D7 design. 0 Follower 78 6L, 6 N000 Disc spring PH Stem nut C.st 8 ZP Tab lock washer 0 0 Handle C.St. Zinc plate, 0 6L Stop plate C.St..00 Zinc plate, 0 0 Wrench head Ductile Iron 6 Gr. 6--, 6 WC, CF8M 6 Wrench bolt EN /-80, 9 Gr 8/8M 7 Sleeve PVC 8 ody bolt EN / -80, 9 Gr 7 Zinc plated, 9 Gr 8M Zinc plated 8 9 ody nut EN 06-, 9 Gr H Zinc plated, 9 Gr 8M 8 0 ntistatic spring 0 ntistatic plunger 79 0 Tag (not shown) 67 0 * Repair kit components ** Only with HermetiX stem seal 9

10 Floating all Valves General Piece Flanged Ordering code system Size - DN-DN6 Class 600 S7X/S7P () Series Valve dimensions S H D C all port TxL thread F PCD Preparation for actuation ø W P P K ½, ¾ & ½ without nut M - ½ with nut Stem flats show valve ball position N thread Std. port Full port all Unit port all port C D H K S W M N P F TxL Weight kg/lb DN8 mm (F0) /8 UNF MX0 / inch DN DN0 mm (F0) /8 UNF MX0 / /8" inch DN0 DN mm (F0) /8 UNF MX0 / /" inch DN DN0 mm (F0) /6 UNF MX0 " /" inch DN DN mm (F0) /6 UNF MX0 / " inch DN0 DN mm (F0) /6 UNF M6X / / inch DN0 DN0 mm (F0) /6 UNF M6X " / inch DN6 DN0 mm (F07) /6 UNF M8X / " inch Kv Cv 0

11 Size - DN-DN6 Class 600 S7X/S7P () Series Components & materials a ody CF8M, 6 WC, CN7M, 9 M-, 9 CW-MW, 9 CX-MW CKMCuN, 99 CDMN 99 CEMN Ends CFM, 6 WC, 0, CN7M, 9 M-, 9 CW-MW, 9 CX-MW CKMCuN, 99 CDMN 99 CEMN all CF8M, 7 N N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 Stem 79 6L, 6 Gr.60 H0D 7-PH, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 * Seat PTFE (), TFM (), RPTFE (), CF PTFE (), PEEK, CF PEEK, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) 6* ody seal () PTFE, RPTFE, UHMWPE, Graphite, VITON, NR, HNR 6*** Support ring 79 6L, 7 N N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** nti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin 8 0 9* Stem seal CF PTFE, TFM, Graphite () () S7P Series is Habonim's standard valve design without the HermetiX stem seal construction () This material can only be used as part of the S7P design () This material is available as standard as Seat-Seal one piece construction, No seal code required () One body seal is used in case of Seat-Seal one piece construction (item #), otherwise three body seals are used 0 Follower 78 6L, 6 N000 Disc spring PH Stem nut EN , 9 Gr 8M Locking clip 67 0 Handle C.St. 9 G000 Zinc plated, 0 0 Serrated washer Handle nut 9 Gr 8M, EN Sleeve PVC 8 ody bolt EN / -80, 9 Gr 7 Zinc plated, 9 Gr 8M Zinc plated 8 ody bolt EN / -80, 9 Gr 7 Zinc plated, 9 Gr 8M Zinc plated 9 ody nut EN 06-, 9 Gr H Zinc plated, 9 Gr 8M 0 nti static spring 0 nti static plunger 79 0 Tag (not shown) 67 0 * Repair kit components ** Only with HermetiX stem seal *** Only with graphite body seal

12 Floating all Valves General Piece Flanged Ordering code system Size - 6 DN80-DN0 Class 00 S7X/S7P () Series Valve dimensions S D C H all port Preparation for actuation P ø W K Stem grooves show valve Q M ball position M TxL thread F PCD N thread N thread M DD Square Std. Full Unit all all Weight Kv C D H K S W M N P F TxL port port port port kg/lb Cv DN80 DN6 mm " (F0) M0x0 " /" inch UNS DN00 DN80 mm " (F0) M0x0 " " inch UNS DN00 mm " (F0) M0x0 " inch UNS DN0 mm /"- 6.0 (F) Mx0 6" inch UNF

13 Size - 6 DN80-DN0 Class 00 S7X/S7P () Series Components & materials a ody CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN Plug CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN all CF8M, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 Stem 79 6L, 6 Gr 60 H0D 7-PH, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 * Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) 6* ody seal PTFE, RPTFE, TFM, UHMWPE, Graphite 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** nti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin 8 0 () S7P Series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the S7 design. 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower 78 6L, 6 N000 Disc spring PH Stem nut C.st 8 ZP Tab lock washer 0 0 Handle C.St. Zinc plate, 0 6L Stop plate C.St..00 Zinc plate, 0 0 Wrench head Ductile Iron 6 Gr. 6--, 6 WC, CF8M 6 Wrench bolt EN /-80, 9 Gr 8/8M 7 Sleeve PVC 0 ntistatic spring 0 ntistatic plunger 79 0 Tag (not shown) 67 0 * Repair kit components ** Only with HermetiX stem seal

14 Floating all Valves General Piece Flanged Ordering code system Size - DN-DN0 Class 0/00 DX/DX, DP () /DP () Series Valve dimensions S H D C ø all port K ø all port P Preparation for actuation P ø W ½, ¾ without nut - ½ with nut M Stem flats show valve ball position F N thread Std. port Unit all all W Weight kg/lb Kv C D H K S M N P F port port Cv DN mm /8 6.6 (F0) / inch UNF DN0 mm /8 6.6 (F0) / inch UNF DN mm /6 7.0 (F0) " inch UNF DN0 mm /6 8.0 (F0) / inch UNF DN0 mm /6 8.0 (F0) inch UNF

15 Size - DN-DN0 Class 0/00 DX/DX, DP () /DP () Series Components & materials a ody CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN Plug CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN all CF8M, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 Stem 79 6L, 6 Gr 60 H0D 7-PH, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 * Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) 6* ody seal PTFE, RPTFE, TFM, UHMWPE, Graphite Support ring 79 6L, 7 N0800, 6 N000, 7 6*** N060, 7 N076, 79 S, 79 S80, 79 S70 () DP/DP Series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the D/D design. 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** nti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin 8 0 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower 78 6L, 6 N000 Disc spring PH Stem nut 9 8M, EN Locking clip 67 0 Handle C.St. 9 G000 Zinc plate, 0 0 Serrated washer Handle nut 9 8M, EN Sleeve PVC 0 ntistatic spring 0 ntistatic plunger 79 0 Tag (not shown) 67 0 * Repair kit components ** Only with HermetiX stem seal *** Only with graphite body seal

16 Floating all Valves General Piece Flanged Ordering code system Size - 8 DN80-DN00 Class 0/00 DX/DX, DP () /DP () Series Valve dimensions S D C H ø all port K ø all port Preparation for actuation P ø W Stem grooves show valve Q M ball position M TxL thread F PCD N thread N thread M DD Square Std. Unit all all W Weight kg/lb Kv C D H K S M M-DD N P Q F TxL port port port Cv DN80 mm (F0) M0x0 inch UNS DN00 mm (F0) M0x0 inch UNS DN0 mm / (F) Mx0 6 inch UNF DN00 mm / (F) Mx0 8 inch UNF

17 Size - 8 DN80-DN00 Class 0/00 DX/DX, DP () /DP () Series Components & materials a ody CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN Plug CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN all CF8M, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 Stem 79 6L, 6 Gr 60 H0D 7-PH, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 * Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) 6* ody seal PTFE, RPTFE, TFM, UHMWPE, Graphite 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** nti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin 8 0 () DP/DP Series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the D/D design. 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower 78 6L, 6 N000 Disc spring PH Stem nut C.st 8 ZP Tab lock washer 0 0 Handle C.St. Zinc plate, 0 6L Stop plate C.St..00 Zinc plate, 0 0 Wrench head Ductile Iron 6 Gr. 6--, 6 WC, CF8M 6 Wrench bolt EN /-80, 9 Gr 8/8M 7 Sleeve PVC 0 ntistatic spring 0 ntistatic plunger 79 0 Tag (not shown) 67 0 * Repair kit components ** Only with HermetiX stem seal 7

18 Floating all Valves General Piece Flanged Ordering code system Size - DN-DN0 Class 0/00 SX/SX, SP () /SP () Series Valve dimensions S H D C ø all port Preparation for actuation P P ø W ½, ¾ without nut - ½ with nut K TxL thread F PCD M Stem flats show valve ball position N thread Std. port Unit all all W Weight kg/lb Kv C D H K S M N P F port port Cv DN mm /8 6.6 (F0) / inch UNF DN0 mm /8 6.6 (F0) / inch UNF DN mm /6 7.0 (F0) " inch UNF DN0 mm /6 8.0 (F0) / inch UNF DN0 mm /6 8.0 (F0) inch UNF

19 Size - DN-DN0 Class 0/00 SX/SX, SP () /SP () Series Components & materials a ody CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN Plug CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN all CF8M, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 Stem 79 6L, 6 Gr 60 H0D 7-PH, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 * Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) 6* ody seal PTFE, RPTFE, TFM, UHMWPE, Graphite Support ring 79 6L, 7 N0800, 6 N000, 7 6*** N060, 7 N076, 79 S, 79 S80, 79 S70 () SP/SP Series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the S/S design. 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** nti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin 8 0 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower 78 6L, 6 N000 Disc spring PH Stem nut 9 8M, EN Locking clip 67 0 Handle C.St. 9 G000 Zinc plate, 0 0 Serrated washer Handle nut 9 8M, EN Sleeve PVC 0 ntistatic spring 0 ntistatic plunger 79 0 Tag (not shown) 67 0 * Repair kit components ** Only with HermetiX stem seal *** Only with graphite body seal 9

20 Floating all Valves General Piece Flanged Ordering code system Size - 8 DN80-DN00 Class 0/00 SX/SX, SP () /SP () Series Valve dimensions S D C H ø all port K Preparation for actuation P ø W K Stem grooves show valve Q M ball position M TxL thread F PCD N thread N thread M DD Square Std. Unit all all W Weight kg/lb Kv C D H K S M M-DD N P Q F TxL port port port Cv DN80 mm (F0) M0x0 inch UNS DN00 mm (F0) M0x0 inch UNS DN0 mm / (F) Mx0 6 inch UNF DN00 mm / (F) Mx0 8 inch UNF

21 Components & materials Size - 8 DN80-DN00 Class 0/00 SX/SX, SP () /SP () Series a ody CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN Plug CF8M, 6 WC, CN7M, 9 M--, 9 CW-MW, 9 CX-MW, CKMCuN, 99 CDMN, 99 CEMN all CF8M, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 Stem 79 6L, 6 Gr 60 H0D 7-PH, 7 N0800, 6 N000, 7 N060, 7 N076, 79 S, 79 S80, 79 S70 * Seat PTFE, RPTFE, CF PTFE, PEEK, CF PEEK, TFM, UHMWPE, VESPEL, PVDF, DELRIN, PCTFE (KEL-F) 6* ody seal PTFE, RPTFE, TFM, UHMWPE, Graphite 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** nti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin 8 0 () SP/SP Series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the S/S design. 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower 78 6L, 6 N000 Disc spring PH Stem nut C.st 8 ZP Tab lock washer 0 0 Handle C.St. Zinc plate, 0 6L Stop plate C.St..00 Zinc plate, 0 0 Wrench head Ductile Iron 6 Gr. 6--, 6 WC, CF8M 6 Wrench bolt EN /-80, 9 Gr 8/8M 7 Sleeve PVC 0 ntistatic spring 0 ntistatic plunger 79 0 Tag (not shown) 67 0 * Repair kit components ** Only with HermetiX stem seal

22 Floating all Valves General Piece Flanged Ordering code system ordering code system The HONIM identification code D 7 X / N P T Size Features Features Design ody / End all / Stem Seat Seal () End connections Rotation Special features Size Code inch mm 0 / 07 ¾ 0 0 ¼ / / D S Q () O M K V Features nti-static Full port Diverter bottom entry Diverter side entry Cavity filler seats Clean assembly for O service mmonia service Chlorine service Vacuum service Series D7 piece bottom entry D NSI #0 Flanged bottom entry D NSI #00 Flanged bottom entry S7 piece side entry S NSI #0 Flanged side entry S NSI #00 Flanged side entry Design P asic design X HermetiX stem seal ody / Ends C. Steel 6 WC / 0 6 S. Steel CF8M 7 Monel 9 M-- I Inconel 6 9 CW-6MC lloy-0 CN7M C lloy-c76 9 CW-MW W lloy-c 9 CX-MW D Duplex 99 CDMN K Super Duplex 99 CEMN S SMO CKMCuN all / Stem 6 S. steel 79 6\6L 8 S. steel 79 0\0L M 7-PH 6 Gr 60 H0D I () Inconel 6 9 CW-6MC Z () Inconel N Monel 6 N000 lloy-0 7 N0800 C lloy-c76 7 N076 W lloy-c 7 N060 D Duplex 79 S80 K Super duplex 79 S70 S SMO 79 S () C K L P () R () S T () U Y W G I R T U V Seat TFM PCTFE (KEL-F) CF PEEK Virgin PEEK CF PTFE % Glass filled RPTFE VESPEL PTFE UHMWPE Derlin PVDF Seal () Expanded graphite Impregnated Graphite % Glass filled RPTFE PTFE UHMWPE VITON NR Rotation degrees rotation degrees rotation applicable for bottom entry diverter valve L Special features ody made from rolled bar EP Electropolished PN all with LTPN surface treatment WR DD stem G.. Internal surface finish (G, G) Valve special stem seals HC High cycle service ORV Viton O-ring based OR NR O-ring based ORE EPDM O-ring based LX FD compliant HermetiX CF PTFE thrust and X shape PPX gasket End Connection W uttweld schd. W0 uttweld schd. 0 W uttweld schd. 0 W80 uttweld schd. 80 XW Extended buttweld schd. 0 SW Socket weld XSW Extended socket weld WO uttweld tube OD ETO Extended tube OD SWO Socket weld tube OD WD uttweld DIN 860 Threaded NPT NSI.0. - National Pipe Taper thread MNPT Male NPT SPT EN ritish Standard Pipe Taper thread MSPT Male SPT EN ritish Standard DIN999 Pipe parralel thread EN ritish Standard DIN8 Pipe parralel thread S0 SE Internal Straight Thread Clamp LL Compression fitting (Imperial) LM Compression fitting (metric) TC Tri-Clamp GR Grayloc Flanged 0 NSI 6. #0 RF 00 NSI 6. #00 RF 600 NSI 6. #600 RF PN6 EN09 PN6 RF PN0 EN09 PN0 RF PN6 EN09 PN6 RF PN00 EN09 PN00 RF () This material enable one piece seat-seal design, the only option applicable for mixing service () Leave the seal code blank when using a seat-seal one piece design () Only applicable for piece valve design () all material only () Stem material only In some applications the available options above are limited to specific sizes please consult with Habonim for details

23

24 w w w. h a b o n i m. c o m Habonim US Toll Free Phone: Toll Free Fax: sales_usa@habonim.com Habonim EUROPE Tel: sales_eu@habonim.com sales_international@habonim.com Habonim USTRLI Tel: sales_au@habonimau.com Habonim CHIN Tel: *6 sales_china@habonim.com Habonim ISREL Tel: Fax: sales_international@habonim.com Habonim UK Tel: Fax: sales_uk@habonim.com Habonim SINGPORE Tel: Fax: sales_singapore@habonim.com Three piece valves Cat. 0/8 REV.0