ANGLE HEADS ADDING MORE AXES WITH MST CATALOG 517-2
|
|
- Jesse Morgan Hopkins
- 5 years ago
- Views:
Transcription
1 TLOG 57-2 NGL HS ING MOR XS WITH MST MRIN ROTRY TOOLS O. 250 West uarte Rd, Ste., Monrovia, US Tel: + (626) ax: + (626) mail: info@artcotools.com Website:
2 MST NGL HS - INX NGL HS, MOULR SRIS PG NGL HS, HL UNIVRSL SRIS PG 7 NSK HS, MOULR SRIS PG 9 NGL HS, HL MINI SRIS PG 8 NGL HS, SOLI & LNG SRIS PG 2 NGL HS, SSORIS PG 20 NUM UTTING T PG 22 NGL HS, HL SRIS PG 5 2 HORSPOWR & TORQU HRTS PG 2
3 MST NGL HS - MOULR SRIS SHNKS XTNSIONS HS NSK PTRS & MINI HS Recommended Grease for ll Series Mobilux P Shell lvania P WI VRITY O SHNKS, NGL HS, N SSORIS MHNILLY RIVN MINI SRIS WITH NSK NGL HS. HRN PRISION SPIRL VL GRS OR OPTIMUM RIGIITY SPLSH OOLNT THRU OY ON MOST MOLS UILT-IN XTRNL OOLNT SUPPLY PORT xternal RUGG ST IRON OY SIGN oolant SUPRIOR PRISION Port OMPT SIGN Splash oolant Thru ody oolant Thru the utter Option GURNT URIS avity at ore.0002" TIR Test ar at ace.0004" TIR Test ar at 2".0006" TIR eviation of ngle (high or low of under = 0) 90 ±.0004" TIR
4 SHNKS MST NGL HS - MOULR SRIS IG. IG. 2 IG. H H J H G.87 /8 NPT xt. oolant Port G.87 /8 NPT xt. oolant Port G.87 /8 NPT xt. oolant Port IG. 4 IG. 5 IG. 6 IG. 7 Spring Pin H H H J H G.87 /8 NPT xt. oolant Port G G.87 /8 NPT xt. oolant Port G.87 /8 NPT xt. oolant Port TPR ORR NO. * G H J IG. T40 40 SHNK T50 50 SHNK T SHNK HSK6 06 SHNK HSK80** 080 P SHNK HSK00 00 SHNK SHNK Note: * means optional dimension of 2.6 for T40, T40 & HSK6 is available. The optional dimension is.5 and.5 for T50 and HSK00. Note: ** means 080P is exclusively for MKINO MG and MG. Note: apto 8 & KM shanks are available upon request. 4
5 HS MST NGL HS - MOULR SRIS MOL OLLT RNG 59 #07 (R20) H K J 62 #0 (R6) #02 (R) #0 (R8) MOL øg H J K Note: G dimension is the smallest I for the head to fit into. G IG. IG. 2 IG. XTNSIONS ORR NO. OLLT IG. 59- H 59-6 H 62- H 62-6 H 64-2 H 64-5 H 65- H 65-6 H 98- H H #07 (R20) #07 (R20) #0 (R6) #0 (R6) #02 (R) #02 (R) #0 (R8) #0 (R8) STU ROR #0 (R6) ø.00 PILOT IG. IG. 2 ORR NO. WT (L.) IG Note: Multiple xtensions can be stacked together for additional reach. Note: No coolant thru body feature available for xtensions. 5
6 MST NGL HS - MOULR SRIS IG. IG. 2 IG. TPR ORR NO. SHNK H RNG OLLT MX RPM WT. IG. T40 T50 T40 + T & T LNG TOOL SHNKS H # H (R20) H # H (R6) SHNK 64-2 H # H (R) H # H (R8) H #0(R6) H # H (R20) H # H (R6) ,000/ SHNK 64-2 H # *6, H (R) H # H (R8) H #0(R6) H # H (R20) H # H (R6) H SHNK # H (R) H # H (R8) H #0(R6) T SHNK H ø.00 STU 8.07 T SHNK PILOT ROR , T SHNK Note: Purchase R collets (p2) and ommon Positioning lock (p20) separately, if needed. Note: The diagram above is shown with an optional coolant hose. The weight (WT) is in lb. Note: * means the max rpm with coolant thru body Gear Ratio of Spindle to ngle xis = : Rotating irection of Spindle to ngle xis = W : W
7 MST NGL HS - MOULR SRIS IG. IG. 2 IG Gear Ratio of Spindle to ngle xis = : Rotating irection of Spindle to ngle xis = W : W HSK LNG TOOL SHNKS TPR ORR NO. SHNK H RNG OLLT MX RPM WT. IG H #07(R20) H H #0(R6) H SHNK 64-2 H #02(R) H H #0(R8) H H #0(R6) ,000/ H *6, #07(R20) H H #0(R6) H H SHNK #02(R) H H #0(R8) H H #0(R6) SHNK 98- H ø PILOT SHNK STU ROR Note: Purchase R collets (p2) and ommon Positioning lock (p20) separately. Note: * means the max rpm with coolant thru body. The weight (WT) is in lb. Note: The diagram above is shown with an optional coolant hose ,
8 MST NGL HS - MOULR SRIS IG. IG. 2 IG Gear Ratio of Spindle to ngle xis = : Rotating irection of Spindle to ngle xis = W : W PTO LNG TOOL SHNKS TPR ORR NO. SHNK H RNG OLLT MX RPM WT. IG H #07(R20) H H #0(R6) H ,000/ H #02(R) *6, SHNK 64-5 H H #0(R8) H H #0(R6) H Ø.00 PILOT STU ROR , Note: Purchase R collets (p2) and ommon Positioning lock (p20) separately. Note: * means the maximum rpm with coolant thru body. Note: The weight (WT) is in lb. Note: apto 8 & KM shanks are available upon request. Note: The diagram above is shown with an optional coolant hose. 8
9 MST NGL HS - MOULR NSK MINI SRIS IG. IG. 2 IG. IG IG. 5 IG. 6 Note: The diagrams are shown with optional coolant hoses. 50 T & T LNG TOOL SHNKS ORR NO. TPR NSK PTR NSK H 40 SHNK 50 SHNK 240 SHNK 59-NSK- MX. OLLT TYP 9 * 9.78 (9.9) WT (L.)**.2 59-NSK-5 R-27 /8 HS.78 (.49) NSK (.64) NSK (0.06).9 RX NSK-5 /4 HK 2.45 (2.06) RX-7 59-NSK (4.) NSK-S 9.58 (9.9). 59-NSK-5S R-200 /8 HS.58 (.9) NSK-7S.8 (.44).9 59-NSK-SS 7.4 Rotating irection of Spindle to ngle xis = W : W MX RPM*** 0,000/ 6,667 I (8.8).86 0,000/ /8 H K (8.98).87 7, M-00M K (0.44).7 0,000/ /6 M-00S K (0.44).55 9,090 Note: NSK Mini Series are for light milling and drilling applications only. Note: * means dimensions in ( ) are for T40 tool shank. Note: ** means assembly weight with 40 or 06 Shank. or 50 or 00 Shank, add additional 5.5 lb. to the listed weight. Note: *** means max machine spindle RPM/max angle axis RPM. The max RPM values are for machine spindle/angle axis. Note: /8 collet furnished with R-27, RX-27, R-200, I-00, & K-00. /6 collet furnished with M-00M and M-00S. Note: Purchase ommon Positioning lock (p20), Shank, NSK dapters, NSK Mini ngle ttachment, and applicable collets separately. apto 8 & KM Shanks are available upon request. IG.
10 ORR NO. TPR NSK PTR NSK H 06 SHNK 00 SHNK 59-NSK- MX. OLLT TYP WT (LS)**.2 59-NSK-5 R-27 /8 HS NSK NSK RX NSK-5 /4 HK RX-7* 59-NSK NSK-S NSK-5S R-200 /8 HS NSK-7S NSK- SS ORR NO. TPR NSK PTR NSK H 6 SHNK MST NGL HS - MOULR NSK MINI SRIS HSK LNG TOOL SHNKS PTO LNG TOOL SHNKS 59-NSK- MX RPM*** 0,000/ 6,667 I ,000/ /8 H K , M-00M K ,000/ /6.0 M-00S K ,090 MX. OLLT TYP 9.9 WT (L.).5 59-NSK-5 R-27 /8 HS NSK NSK RX NSK-5 /4 HK RX-7* 59-NSK NSK-S NSK-5S R-200 /8 HS NSK-7S NSK- SS Rotating irection of Spindle to ngle xis = W : W MX RPM*** 0,000/ 6,667 I ,000/ /8 H K , M-00M K ,000/ /6 M-00S K ,090 IG. Rotating irection of Spindle to ngle xis = W : W Note: * means the maximum RPM for RX-7 is 0,000/,666. Note: ** means assembly weight with 40 or 06 Shank. or 50 or 00 Shank, add additional 5.5 lb. to the listed weight. Note: *** means maximum machine spindle RPM/maximum angle axis RPM. Note: The max RPM values are for machine spindle/angle axis. Note: NSK Mini Series are for light milling and drilling applications only. Note: /8 collet furnished with R-27, RX-27, R-200, I-00, & K-00. /6 collet furnished with M-00M and M-00S. Note: Purchase ommon Positioning lock (p20), Shank, NSK dapters, NSK Mini ngle ttachment, and applicable collets separately. apto 8 & KM Shanks are available upon request. Note: The diagrams are shown with optional coolant hoses. IG.
11 (2.6) MST NGL HS - MOULR NSK MINI SRIS NSK PTRS (shown with optional NSK Mini ngle ttachments) 59-NSK- 59-NSK-5 59-NSK-7 59-NSK-S 59-NSK-5S 59-NSK-7S 59-NSK-SS NSK MINI NGL TTHMNTS R-27 (R-200).8 (.90) RX-27 I-00 K-00 M-00M M-00S RX Note: Please purchase Shanks (p) and NSK ir Spindle units separately NSK IR SPINL HOLR - MOL NO. 80P-MH0 ngineered xclusively for Makino s Model: MG- Ideal for Milling and rilling Operations HSK M-02OR NSK ir Motor.59 ir Inlet.8 Shank Holder Silencer, ir Outlet Ring dapter RX-27 (RX-7) etails of Ring dapter (View -) ir Outlet Note: The diagram is shown with optional NSK ir Motor and NSK Mini ngle ttachment. Please purchase optional accessories separately.
12 MST NGL HS - SOLI & LNG SRIS HRN PRISION SPIRL VL GR OR OPTIMUM PRORMN VILL IN NGL SHT ONIGURTIONS: TG00, R2 OLLT, N T0 MSTR HOLR TYP OR SOLI SRIS VILL IN NGL SHT ONIGURTIONS: TG00 OLLT, T0 MSTR HOLR TYP, N T40 MSTR HOLR TYP OR LNG SRIS TH LNG SRIS IS OLT IRTLY ON TH MHIN SPINL OR MXIMUM RIGIITY UTTING IRTION NYWHR ROM 0 TO 60 OMPT NGL H SIGN N RUGG OY ONSTRUTION SUPRIOR PRISION + _ 2 GURNT URIS avity at ore.0002" TIR Test ar at ace.0004" TIR Test ar at 2".0006" TIR eviation of ngle (high or low of under = 0) XTRNL OOLNT SUPPLY PORT OR MOST MOLS 90 ±.0004" TIR H Note: The diagrams are shown with optional coolant hoses. 2
13 MST NGL HS - SOLI & LNG SRIS IMNSIONS N SPIITIONS IG. IG. 2 SPINL M G H L M L K J K J IG. SPINL L M K J ROTTING IRTION M/ Spindle to ngle xis = W:W MOL SPINL * G H 60 TG R T T40* MOL J K L øm GR RTIO O SPINL: NGL XIS IG : : : :.90 Note: * means T40 configuration is available upon request.
14 SOLI SRIS MST NGL HS - SOLI & LNG SRIS IG. IG. 2 TPR ORR NO. MOL (OMPRSSION) MX RPM* WT (L.) IG. T T50 Note: The diagrams are shown with optional coolant hoses.,000/2, ,500/2, ,500/2, ,500/2, T ,000/2,40 6. LNG SRIS IG. IG. 2 IG. TPR ORR NO. MOL MX RPM* WT (L.) IG. T ,500/2, Note: Purchase ommon Positioning lock (p20) separately for Solid Series. Note: Purchase T0 and T40 dapters separately. Please visit for more info. Note: Mounting Plate is furnished as a standard accessory. 40 Type comes with -60 and 50 Type comes with -90. Note: Mounting plate must be machined to fit a specific machine. Note: * means max machine spindle RPM/max angle axis RPM. Note: apto & KM Shanks are available upon request for Solid Series only ,200/, LNG SHNK OR MOULR HS IG. IG Head TPR ORR NO. MX RPM* WT (L.) T40 40 SHNK 6, T50 50 SHNK 6, IG. 50 PRLLL 2, Note: Purchase Modular Heads separately.
15 IG. IG. 2 IG MST NGL HS - HL SRIS OMPT N LIGHT WIGHT SIGN SHNK T40 T50 T0 T40 HSK 6 ST IRON HOUSING OR MXIMUM RIGIITY IL OR RILLING, N LIGHT MILLING PPLITIONS GR RTIO M/ Spindle to ngle Head = : for Models 52 & 54 : 0.8 for Model 56 ROTTING IRTION M/ Spindle to ngle xis = W:W OR RILLING & LIGHT MILLING PPLITIONS ORR NO. RNG OLLT MX RPM* WT (L.) , # , # , # , # , # , # L # #20 IG , / , , # , # , # , # , # , # Note: T0 Half unit is furnished with straight positioning pins. The ommon Positioning lock for T0 Half is H-0. Note: Purchase ommon Positioning lock (p20) and applicable collets (p20) separately. Note: * means maximum machine spindle RPM. Note: apto & KM Shanks are available upon request
16 IG. IG. 2 IG MST NGL HS - HL SRIS SHNK T40 T50 T0 T40 HSK 6 ORR NO. RNG TP SLV MX RPM* WT (L.) #4-/ , # #4-/ , # #4-5/ , #55/# #4-/ , # #4-/ , # #4-5/ , #55/# L OMPT N LIGHT WIGHT SIGN ST IRON HOUSING OR MXIMUM RIGIITY XLUSIVLY OR TPPING PPLITIONS GR RTIO M/ Spindle to ngle Head = : for Models 5 & 55 : 0.8 for Model 57 ROTTING IRTION M/ Spindle to ngle xis = W:W OR TPPING PPLITIONS #4-/4 #5 #4-/2 #55 IG , / , #4-/ , # #4-/ , # #4-5/ , #55/# #4-/ , # #4-/ , # #4-5/ , #55/# Note: T0 Half units are furnished with straight positioning pins. The ommon Positioning lock for T0 is H-0. Note: Purchase ommon Positioning locks (p20) and Tap Sleeves (p20) separately. Note: * means maximum machine spindle RPM. apto & KM Shanks are available upon request
17 MST NGL HS - HL UNIVRSL SRIS 75 TYP rilling & Milling 76 &78 TYP rilling & Milling 77 &79 TYP Tapping IG. IG. 2 IG. IG (.9) (.8) (.67) ottom View.5 (.87) (.70) OMPT N LIGHT WIGHT SIGN UTTING IRTION NYWHR ROM 0 TO 60 & 0 TO ±20 XLUSIVLY OR RILLING, TPPING & LIGHT MILLING PPLITIONS GR RTIO: M/ Spindle to ngle Head = : 0.48 ( : 0.56 for T0 Models) ROTTING IRTION: M/ Spindle to ngle xis = W:W (W:W for T0 Models) SHNK T40 T50 T0 T40.46 ORR NO SHNK T40 T50 T40 7 RNG OLLT/ TP SLV # # #4-/4TP # # # #4-/4TP # #070 #4-/4TP # # # #4-/4TP #5 ORR NO WT (L.) IG / RNG OLLT #6 #4-/2 TP # #6 #4-/2 TP # #6 #4-/2 TP # WT (L.) IG Note: T0 Half Universals are furnished with straight positioning pins. The ommon Positioning lock for T0 is H-0. Note: Purchase ommon Positioning locks (p20), Tap Sleeves (p20), and collets (p20) separately. Note: The maximum RPM of machine spindle to angle axis is 6,00 :,000 (7,200 : 4,000 for T0 Models) Note: The dimensions in ( ) are for and for apto & KM Shanks are available upon request.
18 MST NGL HS - HL MINI SRIS ULTR SLIM N LIGHT WIGHT SIGN ST IRON HOUSING OR MXIMUM RIGIITY IL OR MILLING, RILLING, N TPPING PPLITIONS GR RTIO M/ Spindle to ngle Head = : 0.88 ROTTION IRTION M/ Spindle to ngle Head = W : W HL MINI SRIS SYSTM HRT N IMNSION OLLTS SLVS J G H See next page for details of angle axis with sleeve option. K TPR ORR NO. RNG G H J K MX RPM* T T , T T Note: *means the maximum machine spindle. Note: Half Mini Series units are furnished with built-in HM-02, #02 (R) sleeves as a standard accessory. Other types of sleeves, collets, & common positioning blocks are optional. Purchase separately. Note: is furnished with straight positioning pin for the common positioning block, H-0. Purchase H-0 separately. Note: is available in set-up for use on rother Machines upon request. onsult your local distributor for details. Note: HSK, apto & KM shanks are available upon request. 8 WT (L.)
19 TILS O NGL XIS MST NGL HS - HL MINI SRIS.2 #0 (R8) ollet 0-0 ollet Nut #02 (R) ollet 0-02 ollet Nut *.42 I *.7 I. *.78 I. *.86 I. HM-00 (Shrink-it) HM-00 (Side-Lock) HM-00 (Tap) HM-0 (R8) HM-02 (R) Note: See Half Mini Sleeves & ollet harts for details of Range. Note: Half Mini Shrink-it ollets require heating device, HR-0S-20, for cutting tool insertion. Purchase separately. Note: Purchase Half Mini Sleeves, Half Mini ollets, and R8 & R ollets separately. Note: * means the smallest I for the head can fit into. HL MINI SLVS IG. IG. 2 IG. ORR NO. PPLIL OLLTS RNG IG. HM-00 Shrink it ollets Side-Lock ollets Tap ollets HM-0 #0 (R8) HM-02 #02 (R) Note: Purchase Shrink-it, Side-Lock, or Tap collets separately for HM-00. Note: Purchase #0 (R8, p2) collets separately for HM-0. Note: Purchase #02 (R, p2) collets separately for HM-02. Note: Wrenches and nuts are furnished for HM-0 and HM-02. HL MINI OLLTS SHRINK-IT ORR NO. RNG HMS HMS HMS SI-LOK ORR NO. RGN HML HML HML TP ORR NO. TP SIZ SHNK I. HMT-004 #4 #6.4 HMT-008 #8.68 HMT-00 #0.94 HMT-02 #2.220 HMT-0 /4.255 Note: Shrink-it collets require heating device, HR-0S-20. Purchase heating device separately for insertion and removal of cutting tool. Note: Shrink-it collets available in metric sizes upon request. 9
20 OMMON POSITIONING LOKS ORR NO..8.7 IG. P-40R P-50R H OLLT SIZ MST NGL HS - SSORIS 0.28 Note: P-40R for 40, 240, & 06 taper config. P-50R for 50 and 00 taper config. H-0 for Half with 20 shank config. Note: ommon Positioning locks must be machined by a purchaser to fit a specific machine spindle. OLLTS OR HL N HL UNIVRSL.5 ORR NO. / / * / / * / / / * / / * / / / OLLT HUK # #6 TP SLVS OR HL & HL UNIVRSL 20 SIZ ORR NO. HUK SIZ #070 #20 NGL H ORR NO. TP SIZ #4 - # #8.68 # # # / #4 - # # #0.94 # # / / / /2.67 # / /8.480 Note: ISO metric size Tap Sleeves are available upon request. RNG Note: ollet collapsibility is.008 in diameter on all sizes. * means the size is not in stock. Note: # metric size collets, ranging from 2.6mm to 0mm in 0.2mm increments, are available upon request. Note: #6 metric collets, ranging from 6mm to 20mm in 0.2mm increments, are available upon request.
21 MST NGL HS - R & TG OLLTS R OLLTS OR MOULR N SOLI SRIS SIZ #0 (R8) #02 (R) HUKING RNG ORR NO SIZ #0 (R6) #07 (R20) HUKING RNG ORR NO SIZ #09 (R2) HUKING RNG ORR NO TG00 OLLTS OR SOLI & LNG SRIS OLLT SIZ ORR NO. / / / / / / / / / / / / / / / / / / / / OLLT SIZ ORR NO. / / / / / / / / / / / / / / / / / / / / OLLT SIZ ORR NO. 2/ / / / / / / / / / / / / / / / / /
22 MST NGL HS - UTTING T MOULR SRIS SOLI SRIS WORK PI MOL NO MTRIL S04 Stainless Steel STM207 luminum UTTR 0mm, 2flute M 0mm, 2flute arbide M UTTING ONITIONS WORK PI 640 rpm : 2.6 in/min. V: 65.6 ft/min. f:.002 in. per tooth ,000 rpm :5.75 in/min V: 4.4 ft/min f:.002 inch per tooth MOL NO MTRIL STM207 luminum ISI055 Steel S04 Stainless Steel S04 Stainless Steel UTTR 6mm, 2flute M 2mm, 2flute M 2mm, 2flute M 6mm, 2flute M UTTING ONITIONS.97,800 rpm : 5.2 in/min. V: 295. ft/min. f:.006 in. per tooth rpm :.54 in/min V: 65.6 ft/min f:.0028 inch per tooth 527 rpm : 0.79 in/min. V: 96.9 ft/min. f:.0024 inch per tooth rpm :.57 in/min. V: 95. ft/min. f:.006 inch per tooth HL MINI SRIS WORK PI MOL NO MTRIL ISI050 Steel ISI050 Steel UTTR 6mm, arbide rill 6mm, arbide rill UTTING ONITIONS.7 5,000 rpm : 9.8 in/min. V:.70 ft/min. f:.002 in. per tooth.26.04,500 rpm : 8.27 in/min. V: 2.60 ft/min f:.002 inch per tooth HL SRIS HL UNIV SRIS WORK PI MOL NO MTRIL ISI055 Steel ISI055 Steel ISI055 Steel ISI055 Steel UTTR 2mm rill 0mm M 2M Tap 20mm M WORK PI 670 rpm :.5 in/min. V: 8.7 ft/min rpm :.97 in/min V: 6. ft/min M2 84 rpm : 2.68 in/min. V: 2 ft/min rpm :.26 in/min. V: 2.8 ft/min. MOL NO MTRIL ISI055 Steel S04 Stainless Steel ISI055 Steel ISI055 Steel UTTR 0mm M 0mm rill M8 Tap 6mm M 900 rpm :.94 in/min. V: 9.9 ft/min rpm :.6 in/min V: 2.5 ft/min rpm : 2.28 in/min. V: 20.7 ft/min rpm :.57 in/min. V: 2 ft/min
23 MST NGL HS - HORSPOWR & TORQU HRTS 5 MOULR SRIS 5 59, 62 Horsepower 8 4 Torque (T-L.) RPM SOLI & LNG SRIS RPM 60 Horsepower Torque (T-L.) , RPM HL & HL UNIVRSL SRIS RPM Horsepower RPM Torque (T-L.) RPM 54, 55 56, 57 52, 5, 75, 76, 77 78, HL MINI SRIS 0.58 Horsepower Torque (T-L.) RPM RPM 2
24 USTOM NGL HS With over 0 years of experience, MST has incorporated the best know-how to manufacture specialized and custom ngle Heads to meet every applications. Most ngle Heads are serviced and repaired at our home office in Southern alifornia. HOM OI Los ngeles rea merican Rotary Tools o. 250 West uarte Road, Ste. Monrovia, alifornia US Tel: (626) ax: (626) mail: info@artcotools.com Website: 2,
LATHE TOOLHOLDER BUSHINGS
HUK JWS LTH WORKHOLING MHIN VISS VIS JWS RTNTION KNOS R,, TG OLLTS TOOLHOLRS TP HOLRS INXL RILLS TURNING & ORING NMILLS, RILLS TPS & RMRS RSIVS MSURING TOOLS MRO & STY LT STOK/RILL RO LTH TOOLHOLR USHINGS
More informationPages 2-3 Standard Straight Shank Holder. Pages 8-11 Speed & Feed Chart and Coolant Recommendations
pplication Index,,, 130 High Performance rill Pages 2-3 Standard Straight Shank Holder Pages 14-16,, F, G, H 130 High Performance rill and dapter (sold separately) Pages 4-7 Standard Taper Shank Holder
More informationGEN2 T-A Drill Inserts
RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts Series iameter Range: 12.98mm - 17.65mm (.511 -.695 ) RILLING T1 1 132 HSS Inserts - Super obalt arbide Inserts - K2 (2) K35 (1) Insert
More informationHigh Speed Spindles Series
High Speed Spindles Series onstant High Speed and Torque 25,000-90,000 rpm,
More informationDRILL CHUCKS-KEY TYPE
HUK JWS LTHE WORKHOLDING MHINE VISES RETENTION KNOS ER, D, TG OLLETS INDEXLE DRILLS TURNING & ORING TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD DRILL HUKS-KEY TYPE LL ERING HUKS all
More informationP: F:
TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationCOOLANT-FED TOOLING & SYSTEMS
V-FLNGE ER OLLET HUK SINGLE PIN FE SEL ROTRY GLND SSEMLY PRT NUMER RNGE OLLET SERIES DIMETER PROJ. D TR TO TR GLND (INLUDED) MINIMUM PRESSURE (1) MXIMUM PRESSURE (2) MXIMUM SPEED (RPM) (3) REPLEMENT SEL
More informationRevolutionary High Speed Technology
Revolutionary High Speed Technology Power, Precision and Reliability at 25,000-90,000 rpm to 1.60 hp +1.561.994.0500 www.airturbinetools.com info@airturbinetools.com HIGH SP SPINLS re Your Machine Spindle
More informationCCW. φ90. 6,000min -1. φ119 ー M 4 M 4 21 ー M 5 M 5 ー M 6 M 6 ー M 8 M 8 TA 6 ー M 3 M HFT 6 ー M 4 M 4 22 HUT 6 ー M 5 M 5 HFT12
AF 90 rill ndmill Fig. 1 F7 ( ) F7 φ=1 7 68 60 ( 55 ) 42 ( 46 ) φ72 Fig. 2 4,000min Fig. 4 Fig. 6 4,000min F12 FA20 FT6 78 59 59 62 4,000 min 5,000min 4,000min 29 29 φ=2.5 13 φ=5.8 20 φ=3 12 58 Fig. 3
More informationCATalog A work of art... and function.
Talog 99-05 work of art... and function. Our rotary tables are customizable to perfectly match your specifications. Outstanding performance combined with immediate customer service response guarantees
More informationISOMETRIC VIEW SCALE: 1/2
NOTS:.. THIS RWING SRIS TH UL xx SRIS LTRONI UL PUMP. UNLSS OTHRWIS SPII, LL VIWS R MOLS -c, -c OR -c. TURS INLU: - THR PHS RUSHLSS MOTOR WITH NOYMIUM MGNTS - INTGRT LTRONIS WITH SP ONTROL - WT MOTOR SIGN,
More informationShrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
More informationDETa-1 Collet Holder DTA. DTE Fully applicable. DTB For high-speed cutting, High cost performance. 2mm collapsibility with just one collet!!
HSK-T ing Systems or Turning Mill M/ ETa-1 OET HOER AGE HEA General Purpose ETa-1 ollet Holder Pull collet type OET HOER 2mm collapsibility with just one collet!! Just 6 collets is all it takes to chuck
More informationVertical Multi-stage Pumps - 60 Hz.
P erk.qxd 1/5/6 3:24 PM Page 1 Vertical Multi-stage Pumps - 6 Hz. PVM - ast Iron PVMI - 34 Stainless Steel PVMX - 316 Stainless Steel Models low Series HP Range GPM PVM/PVMI/PVMX 2 1/2 5 1 2 PVM/PVMI/PVMX
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationNAKAMURA TOME LIVE TOOLING
NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000
More informationANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationCollet Chucks and Collets
ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16
More informationFMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationCOLLET HOLDER. CTA type. CTH type For high-speed. 3 times longer cutter life with using high-precision collet
OET HOER M/ TOO OET HOER Ultra precision taper collet chuck The best-suited base holder applicable to all the kinds of machining This holder meets all the requirements for high-speed cutting; Accuracy,
More informationCAM INDEX PAGE DATE DESCRIPTION
CM INX 8/24/7 PG T SCRIPTION C-1 8/24/7 Cam Index C-2 6/27/7 erial Cam Specifications C-3 3/23/4 erial Cam Specifications C-4 6/9/4 Standard erial Cam nvelope C-5 8/24/7 Performance Calculation, ie Mount
More information441 SERIES POWER ADJUSTABLE DOOR CLOSERS
441 SRIS POWR JUSTL OOR LOSRS Non-handed djustable power range 1 to 6 Universal retrofit hole spacing actory preset to size 3 Power adjustable arm bracket Tri-pack for regular, parallel arm and top jamb
More informationDirect-Fired Heating, Ventilation and Pressurization Systems
2000-Series irect-ired Heating, Ventilation and Pressurization Systems imension and Selection uide 1.800.536.3461 www.rapidengineering.com N: 100% Outside ir Only 2000-Series Selection uide M (m 3 /h)
More informationEXCLUSIVELY AVAILABLE AT KAR IN CANADA
XLUSIVLY VILL T R I PS Series Universal - Plain ack ounting Semi-Steel ody, 3-aw Self-entering s wit 2-Piece ard Reversible aws edium duty 3 pinion design ac cuck is provided wit: 1 set of ard master jaws
More informationCONTROL VALVES CONTROL VALVES BALL VALVES VBN2, VBN3 SERIES DESCRIPTION FEATURES SPECIFICATIONS
ONTROL VLVS LL VLVS VN2, VN SRIS SRIPTION The VN2 and VN Series are Honeywell's characterized flow, low torque, two- and three-way ball valves. They are designed to provide v ratings that closely match
More informationER TOOLHOLDING SYSTEM
ER TOOLHOLDING SYSTEM HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and Autofacer 1977 Parlec expands
More informationFEATURES TYPICAL APPLICATIONS. Vacuum and gaseous applications. Liquid, gelatinous and highly viscous media. High cycle applications.
VX Series High Pressure 2-way/3-way oaxial Valve High pressure coaxial valves are the best choice in process and fluid control and combine performance, economy and availability. FTURS i-directional compact
More informationCompression Fittings 36 Series Metric
6 Series 4 mm 28 mm O/ l l l l Wide range of types and sizes Rugged and durable Suitable for use under extreme conditions of pressure and temperature Ideal for most general industrial applications Technical
More informationHES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
More informationCATalog A work of art... and function.
Talog 99-05 work of art... and function. Our rotary tables are customizable to perfectly match your specifications. Outstanding performance combined with immediate customer service response guarantees
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationBoring. Reaming. Burnishing. Threading. Drilling ASC 320. High Penetration Solid Carbide Solutions. Specials
oring Reaming urnishing Threading rilling S 320 High Penetration Solid arbide Solutions Specials S 320 High Penetration Solid arbide rilling System iameter Range: 3.00mm - 20.00mm (0.1181-0.7874 ) eyond
More informationA FORMAT: Met-lega-master-tb-prod-A3 REVISION: C DATE: 2017/02/06
RL WITH OMPON UL SHT(S) (QTY. VRIL) LL PRT NO. QTY. O TP PRTS ORINTTION RFR TO SHT RO LL NO. OF RLS WITH M G (QTY. VRIL) RL WITH OMPON NTR UL SHT(S) (QTY. VRIL) 0.0 MOSS TP RO LL NO. OF RLS WITH M G (QTY.
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationVELAN COMPANY PROFILE
VL-GPV-27 VLN COMPNY PROFIL Velan is one of the world's leading manufacturers of industrial steel valves, supplying gate, globe, check, ball, butterfly and knife gate valves for critical applications in
More informationMATERIAL SPECIFICATIONS STYLE PG THREE-HOLE RECTANGULAR STYLE PG STYLE PG THREE-HOLE RECTANGULAR
ROMC HRNSS S HRNSS : STM 36 Steel, profile shape cut with plasma arc or oxy-fuel. Holes plasma arc cut or drilled. Stainless steel optional. TI-S: ll Thread Rod. lloy steel per STM 193 Grade 7. Stainless
More informationFR 9001 Aluminum Sliding System
R 9001 luminum Sliding System R 9001 SLID TYP: MOUNTING: Modular luminum Sliding System ottom Mount or Side Mount 50 WIDTH: 58 mm (2.28 in.) LOD PITY: dynamic up to 225 kg (500 lbs.) 68 55 5.5 5.5 MTRILS:
More informationG Rotary Unions. For coolant, water, oil and air service. High speed rotating unions for transferring fluids and air.
G Rotary Unions or coolant, water, oil and air service Precision rotary unions for more effective cooling and lubrication. High speed rotating unions for transferring fluids and air. ontents Type G Rotary
More informationRADIAL PISTON (RM) AIR MOTORS
RIL PISTON (RM) IR MOTORS The Globe RM air motors are a series of compact heavy duty radial piston air motors offering and exceptional range of control valve and output options. The motors are four or
More informationE2530 SERIES E2550 SERIES E3000 SERIES E3200 SERIES E4000 SERIES 5 AIR LINE KIT 7 TECHNICAL DATA 8 APPLICATION EXAMPLES
ispeed E0 SERIES,000~0,000 min - (rpm) Output W Outside Diameter (ø. mm) The E0 Series is capable of up to 0,000 min - (rpm) and employs a high-speed, ultra-quiet brushless motor. High-performance system
More informationSection VIII Hydraulic Tooling
Section VIII Hydraulic Tooling MSTRLIN CYLINR CCSSORY MTING CHRT Masterline Knuckle Masterline Clevis racket Masterline RS Masterline lignment Coupler KN-1 C-1 1/2 x 1 7/8-RS SC-5 KN-2 C-2 1/2 x 2 5/8-RS
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationFOR BOM ENTRY ONLY NOTES: 1. CUSTOMER ASSEBLY SHEETS 2-6. MTC3606HD
ITM PT NO. SIPTION QTY. WIGHT NOT NO. 1 SF-QV PLLT SF-QV PLLT 1 56.72 2 MT360602 SF-QV Transition Swivel Plate 2 18.40 LS 3 SFQV01 SF-QV rm Frame Weldment 1 59.92 LS 4 MT360601 SF-QV ight rm Frame Weldment
More informationDIE CAST ALUM. & STAINLESS SELF-CLEANING BLAST GATE CLAMP TOGETHER STAINLESS STEEL FULL BLAST GATE. Double CYL. Compact Series
2018 I ST LUM. ULL LST GT I ST LUM. HL LST GT I ST LUM. & STINLSS SL-LNING LST GT GLV., 304 & 316 STINLSS STL. LST GT GLV. MNUL W/ UHMW SLS LST GT STINLSS STL MNUL W/ UHMW SLS LST GT LMP TOGTHR ST LUM.
More informationALLMATIC HD EXTREMELY ROBUST AND RELIABLE
20 ALLMATIC HD EXTREMELY ROBUST AND RELIABLE For mor tn 40 yrs now, ALLMATIC HD s n wtwor for rliility. Its stury sin fftivly mks it liftim invstmnt. 21 HD mnil 22 ALLMATIC HD MECHANICAL MECHANICAL HD
More informationType2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
More information1 OF 9 2CCT ML-XT CV CONNECTOR PRODUCT CUSTOMER DRAWING BACK COVER HEAT SHRINK HOUSING PLUG SEAL PLUG WEDGELOCK TPA BACK SEAL PLUG HOUSING
K OVR PLUG SL HT SHRINK HOUSING PLUG WGLOK TP K SL RPTL HOUSING PLUG HOUSING K SL RPTL WGLOK TP HT SHRINK HOUSING K OVR NOTS. S SHTS TO FOR UNSPIFI NOTS, IMNSIONS N PRT NUMRS THIS RWING ONTINS INFORMTION
More informationBRONZE BEARING EMERGENCY BANKS
RONZ RING MRGNY NKS SVS MONY Reduce time lost when breakdowns occur due to bearing failures. You own stock any time day or night. OMPT Handy metal kit keeps bearings together in conveniently labeled compartments.
More informationMEGA5 Series Bridge Type 5-Axis Machining Centers
Series ridge Type 5-xis Machining enters WE MEHNTRONI O., LT. HEQURTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FX : +886-3-588-5194 Website :
More informationMinimum Investment for Maximum Performance Linear Guide Ways
ounded in 197, Pinnacle is specialized in manufacturing all kinds of machining centers with excellent experience in technology, quality and service. Pinnacle machining centers range from 5-axis, double
More informationSpring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in. INTRODUCTION
VLVS & CONTROLS KYSTON PNUMTIC CTUTOR Spring Return and ouble cting Pneumatic Quarter-Turn ctuators For Output Torques to 27,624 lb.in. INTROUCTION For remote control of any quarter-turn application, including
More informationHepcoMotion. HTS telescopic ball bearing slides
HepcoMotion HTS telescopic ball bearing slides ontents Introducing the HepcoMotion HTS eature and enefits 1 ONSTRUTION 2 XPLNTION O TRMS Load Rating 2 Load Rating and uty ycle 2 Safety 2 Travel (xtension)
More informationMAIN HYDRAULIC FLANGES AND COMPONENTS
TLOG 45 RON MTRI VRSION MIN YRULI LNGS N OMPONNTS XPRIN: Over 55 Years of ependability 48,000 square foot State-of-the-rt manufacturing facility 4-bolt langes manufactured in the US QUI LIVRY: Over 5 Million
More informationPENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features
PENCIL DESIGN Benefits and features For drilling to finishing Pencil design enabling machining in deep cavities and complex components Special designs possibility High clamping force 6 Nm is with its extreme
More informationGeneral Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS
General Purpose all Valves RTIFID TO ISO 92 QULITY STNDRDS VOP- ON-PI RDUD PORT GNRL PURPOS LL VLV 4 2 (8 mm) RON OR STINLSS STL ODY, RPTF STS FIGUR NUMR RON = S-L2-SSG F8M = S-L-SSG STNDRD MTRILS PRT
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationPFF SERIES FLANGED NETWORK PLASTIC BOX
PFF SERIES FLANGED NETWORK PLASTIC BOX Thnil Dt Prottion lss: IP40 Oprting tmprtur: -10 C ~ +60 C 1 Nw PF plsti s with wll mounting flng ottom dsign. Md of flm-rsistnt ABS UL94V-0 nd vill in off-whit olor.
More informationConstant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM <1.4HP / 1.04kW
Constant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM
More informationIndustrial Lifting Equipment
Industrial Lifting quipment Trolley and Tractor Selection Guide 1/2 20 metric ton Lifting apacity Ingersoll-Rand offers a wide variety of plain, geared or powered trolleys for use with the MLK and HLK
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationCOST-EFFECTIVE AUTOMATION
E Systems specialise in the design and production of Drilling and Tapping units and pneumatics/hydraulics according to customer specification. Our business is based on long experience and cutting-edge
More informationDOUBLE ENVELOPING WORM GEAR SETS
OUL NVLOPIN WORM R STS 172 one rive Product atalog and ngineering Manual ouble nveloping Worm ears & Speed Reducers ontents one rive ear Sets...173 one rive ear Sets - Tables of acklash... 174 one rive
More informationBMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
More informationSOLENOID VALVES no voltage release (lever type) manual reset construction 3/8 to 1
SOLNOI VLVS no voltage release (lever type) manual reset construction 3/8 to N NO 3 2 3/2 Series 308 TURS Lever type Manual Reset function which means that the valve has to be energized as well as manually
More informationDOOSAN LIVE & STATIC TOOLING
DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800
More informationHSK TOOLING N1 - N16 N2 - N10 HSK TOOLING N11 - N12 QUICK CHANGE SYSTEM N13 - N16 CARTRIDGE R38 LEVER LOCK PARTS COMPATIBILITY
HSK OOLIG 1-16 HSK OOLIG 2-10 HSK- OOLIG (ICM Standard) 2 QUICK CHGE SYSEM 11-12 KQC Flower Petal dapter 11 CRRIDGE 13-16 LEVER LOCK PS / P 14 OP CLMP C 15 SCREW CLMP S 16 LEVER LOCK PRS COMPIILIY R38
More informationBROCHURE IP BI-TORQ Valve Automation PO Box 309 1N050 Linlar Dr. La Fox, IL tel: fax:
ROHUR IP-209-0 I-TORQ Valve utomation PO ox 309 N050 Linlar r. La ox, IL 6047 tel: 630-208-9343 fax: 630-232-6235 www.bitorq.com 2-WY RSS VLVS /4 TO 4 LMP N SNITRY VLVS /2 TO 4 PGS 4-5 ITORQ.OM/IP.HTML
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationSHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
More informationMedium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
More informationMARINE STRAINERS. APPLICATIONS: ALL COMMERCIAL & MILITARY MARINE MATERIALS: BRONZE (ALL GRADES), STAINLESS STEEL, OTHER ALLOYS
MRIN STRINRS PPLITIONS: LL OMMRIL & MILITRY MRIN MTRILS: RONZ (LL GRS), STINLSS STL, OTHR LLOYS SIZS: 3/8" TO 30" ONNTIONS: UNION NS, SILVR RZ, NPT, FLNG, T. QULITY SYSTM: ISO-9001:2000, RTIFI Y NV SHOK
More informationDirect-Fired Heating, Ventilation and Pressurization Systems
2000-Series irect-ired Heating, Ventilation and Pressurization Systems imension and Selection uide 1.800.536.3461 www.rapidengineering.com N: 100% OUTSI IR ONLY 2000-Series Selection uide NOT: ll information
More informationSPOOL VALVES pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NAMUR style, 1/4 to 1/2
FTURS SPOOL VLVS pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NMUR style, / to / SO/JOUOMTI solenoid valves satisfy all relevant irectives
More informationEdition 1 June Air Grinder and Die Grinder. TA and TXA Series, Angle. Parts Information. Save These Instructions
16574055 Edition 1 June 2006 Air Grinder and Die Grinder TA and TXA Series, Angle Parts Information Save These Instructions TA and TXA Angle Grinder and Die Grinder Exploded Diagram 41 45 60 43 46 47 40
More informationSeries VH Hydraulic Cylinders
Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
More informationSOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NAMUR, 1/4-1/2
SOLNOI VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NMUR, / - / / N 5/ 5 5 0 5 5 / 5/ Series 55-55 FTURS The monostable spool valves have TÜV-XI certified
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationVýhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)
HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16
More informationHSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
More informationAir vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
More informationDOOR STOPS & HOLDERS DOOR TRIM & ACCESSORIES DOME DOOR STOPS CONVEX & CONCAVE WALL STOPS WALL MOUNTED DOOR STOPS ORDERING EXAMPLE: -26D C200 SERIES
OOR STOPS & HOLRS OOR TRIM & SSORIS OM OOR STOPS 00 8 9 Mounting hardware included inish: satin chrome (6) MOL NUMR 00 8 9 MTRIL Zinc die-cast 6 5/6 (4) 5/6 (33) 7/6 (36.5) /6 (7) I 3/4 (44.5) 7/3 () 7/3
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling
More informationPLUG HOUSING BACK SEAL PLUG WEDGELOCK (TPA) PLUG SEAL
HTSHRINK HOUSING K OVR RPTL WGLOK (TP) PLUG HOUSING K SL RPTL HOUSING K OVR PLUG WGLOK (TP) K SL PLUG SL HTSHRINK HOUSING NOTS. S SHTS TO FOR LL UNSPIFI NOTS, IMNSIONS N PRT NUMRS RLS STTUS P RLS.0.0 0::
More informationDimensional Data Clevis / Brackets / Pins / rod Eyes
Dimensional Data levis / Brackets / Pins / rod yes W B W +.00 +.00 rod LVIS R KK THRD Load (tension) (lbs) Size Part # ode KK B R W R Part # ode 15-7-1001 101,80 7/16-0 / 11/ / 1/ 11/ 1/ 1/ 5/8 15-7-1001
More informationSOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NAMUR, 1/4-1/2
SOLNOI VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NMUR, / - / / N 5/ 5 5 0 5 5 / 5/ Series 55-55 FTURS The monostable spool valves in conformity
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationCTA. CTH For high-speed. 6 taper. 16 taper. The optimum holder choices for a variety of applications. Ideal taper angle. Precision spring collet
SK-T ing Systems for Turning Mill M/ OET OER ANGE EA OET OER Taper collet chuck The optimum holder choices for a variety of applications TA General Purpose coolant-through oolant- Through utter SUKIMA
More informationS10/S20 Installation Instructions
MHNIL SL INSTLLTION INSTRUTIONS S0/S0 Installation Instructions PRPRTION 00.005" 0,3 mm 3 4 3 µ" 0,8 µm Ra 000 ±.00" 0,05 mm UTIONS These instructions are general in nature. It is assumed that the installer
More informationBVA Limited Lifetime Warranty
1 The V dvantage V Industrial Hydraulics was launched in 2005 and is centrally located in urope in tten-leur, The Netherlands. V is one of the Shinn u urope brands besides Omega Lift, Omega Mechanix and
More informationMinimum Investment for Maximum Performance Linear Guide Ways
ounded in 197, Pinnacle is specialized in manufacturing all kinds of machining centers with excellent experience in technology, quality and service. Pinnacle machining centers range from 5-axis, double
More informationMAIN HYDRAULIC FLANGES AND COMPONENTS
TLOG 45 LNG PTR VRSION MIN HYRULI LNGS N OMPONNTS XPRIN: Over 55 Years of ependability 48,000 square foot State-of-the-rt manufacturing facility 4-bolt langes manufactured in the US QUI LIVRY: Over 5 Million
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More informationCONNECTIONS MADE SIMPLE
ONNTIONS M SIMPL omplies with all federal & state low lead laws No more solder, glue, clamps, costly tools or clean-up! Push-on connection to copper, PV or PX asily recover from installation & deburring
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationFig Fig. 290L: Left-Hand Thread. rod attachments. Extension piece
ig. xtension piece Range: " through " Material: Malleable iron Maximum Temperature: 40 Service: or attaching hanger rod to various types of building attachments. pprovals: UL Listed ( " - " rod size) and
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationSupply and exhaust ventilation of various premises. Formation of flat air ductworks.
Flt ut Applition Supply n xhust vntiltion o vrious prmiss. Formtion o lt ir utworks. M o whit PVC. Siz: 55x110, 60x122, 60x204 mm. ut lngth rom 350 to 2500 mm. Connt with mthing onntors. 1 1 50035 55 110
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More information