ER TOOLHOLDING SYSTEM
|
|
- Josephine Cooper
- 5 years ago
- Views:
Transcription
1 ER TOOLHOLDING SYSTEM
2 HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and Autofacer 1977 Parlec expands its product line with the introduction of Toolholders, The first Parsetter TMM is produced Parlec begins to manufacture and distribute its own line of oring Tools Parlec enters the Asian market with the opening of a sales and service office 2004 Parlec acquires ristol Tool. Driven and static tools are added to Parlec s manufacturing of Sulky Hubs. product lines. which are sold as Numertap and Autofacer accessories. Parlec builds a new 42,000 square-foot, state-of-the-art manufacturing facility just outside of Rochester in Fairport, N.Y. Parlec becomes ISO 9001 certified. Parlec s sales triple from Parlec further enhances its product line to include Workholding. onstruction of a 58,000 square-foot plant addition begins. in Nanjing hina. extensive product line. A new sales, engineering and distribution facility opens in ristol, England Parlec continues to expand its world wide footprint by opening a Wholly Owned Foreign Enterprise in Nanjing. This gives the company full sales, engineering, customer support and distribution capabilities on 3 continents Sales offices are opened in Tianjin, Xian, Wuxi, and hengdu to expand the 2010 Parlec partners with Gerardi for distribution of Driven & Static Tooling in 2012 Parlec successfully completes a $5 million dollar capital investment hina presence. Europe. Parlec begins distribution of Right angle heads in hina. campaign to automate and expand its manufacturing capabilities in the United States Parlec partners with TDM Systems
3 TOOLHOLDING TOOLHOLDING 4 ER System Features 5 Table of ontents APPLIATION GUIDE ER System Features...5 Performance Selection Guide Production ER ollet huck with Flush Nut High Performance ER ollet huck with Power Nut Performance ER ollet huck with oolant Nut ER Standard ollets ER Tap ollets...30 ER AA Grade 5 Micron ollets ERS Steel Sealed ollets oolant Nut Seal ollets...36 Straight Shank ollet huck...37 ack Up Screw, Nuts and Wrenches...38 PARLE ER SYSTEM FEATURES Heat treated Nickel hrome Molybdenum Alloy steel for the best balance of toughness and wear strength Ground v-groove and flange OD for reliable tool changes Threads and body machined concentric to ground taper for the best possible concentricity PRODUTION ER OLLET SYSTEM WITH DIN FLUSH NUT Production grade collet and nut for quality reliable machining. PERFORMANE ER OLLET SYSTEM WITH OOLANT NUT oolant output options including coolant nut seals and steel sealed collets for reliable effective chip evacuation and tool life improvement ertified alance to G2.5 and AT3 Taper Specification for consistent reliable performance tool change to tool change ID Pocket designed to hold 10 mm Data arrier hip, standard on AT Tools allows for the best tool management Available AD/ oolant onverts from through spindle to flange entry coolant supply Through hole with thread for optional (standard on production collet chucks) back-up screw providing access for coolant and tool support HIGH PERFORMANE ER OLLET SYSTEM WITH POWER NUT Polished Grade AA collets with.0002 or 5 micron gage tolerance for the ultimate concentricity and grip force in ER ollet Systems High performance POWER NUT provides the highest gripping force and concentricity to improve the life and performance of the cutting tools Parlec offers a choice of ER Systems to provide the right solution to all your cutting tool needs.
4 TOOLHOLDING TOOLHOLDING 6 oncentricity = Tool Life Performance Selection Guide Improve your systems performance and tool life by combining high performance collet chucks and high performance collets. Upgrade today for higher performance and operational cost savings! Performance Selection Guide 7 Effects of Runout on the utting Edges Flute 1 High runout flute takes a heavier than planned cut requiring slowing of planned feed. Flute 2 Middle runout flute performs as planned. Flute 3 Low runout flute does not take enough chip to dissipate heat and wears prematurely. Tool Life Prediction of arbide Tools Tool Life in % System Runout in µm System Runout in inches TOOL LIFE Technical Features Gage tolerance of a lass AA 5 micron collet is.0002 (.005 mm) runout at distance to the ISO per chart, measured as TIR Measured in gage with AT2 taper and maximum 1 micron runout of taper ollet Diameter Length at measurement lass 1 lass 2 Parlec lass AA (5 Micron) (1-1.6).098 (2.5).0006 (.015).0004 (.010).0002 (.005) (1.6-3).393 (10) (3 7).630 (20) (7-10).984 (25) (10-18) 1.57 (40).0008 (.020).0006 (.015) (18-26) 1.97 (50) (26-30) 2.36 (60).0010 (.025).0008 (.020) Total ost of Poor Runout Tooling ost Utilizing Standard Production System Per utting Tool TOTAL Pieces ost of Drill $100 $1200 Standard ollet ost $32 $32 Total ost $1232 Utilizing Grade AA Performance System Per utting Tool TOTAL Pieces ost of Drill $100 $500 AA Grade ollet ost $60 $60 Total ost $560 < Technical Features Solid nuts can restrict the uniform contact of the top angle of the collet creating uneven clamping. This will create runout in addition to the normal result of the collet seat and collet. Nuts with friction races are designed to increase grip force and decrease angular deflection. Use ollet hucks with the Parlec Power Nut for best results. Other AA ollet Design Features and enefits 12 slots instead of 16 allows for more than enough collapse and increased the area of contact with less tendency to distort. All edges are deburred and rounded to promote good interface with the taper of the chuck without the tendency to damage it. This results in more consistent repeatability of the system. ollets are polished to eliminate minor blemishes that tend to promote corrosion. etter corrosion resistance will result in longer product life of both the collet and the holder. Highly polished OD surfaces reduce the amount of force absorbed by friction between the collet and the collet chuck seat, increasing the grip force on the cutting tool. The inside bore of the collet is intentionally left unpolished to increase the friction between the collet and the cutting tool shank. The result of an improved AA collet in a quality chuck is increased gripping force, improved rigidity, decreased runout and an overall satisfaction in your collet chuck system.
5 TOOLHOLDING Performance Selection Guide 8 OLLET HUK FEATURES ollet huck Taper alance Up To T 30 T 40 AT 40 AT 50 HSK 63A HSK 100A 20,000 RPM 20,000 RPM OLLET HUK FEATURES Performance Selection Guide AD/ onvertible oolant With Screws: oolant delivered from the spindle through the knob and exits through the cutting tool. 9 Proper Positioning Improper Positioning The proper position of tool in relationship to collet is shown here. Shown here is an improper position of the tool shank in relation to collet. The backup screw has been moved to backup the cutting tool after it has been torqued to proper specifications. Without Screws: oolant delivered from the spindle through the flange and exits through the cutting tool. Solid knob required. Short engagement will result in reduced clamping force, poor concentricity and possible damage to the collet. Improper Positioning Improper Positioning Shown here is an improper position of the tool shank in relation to the collet. A tool should be properly positioned and then clamped to proper torque before a backup screw is used. Flutes extending into the collet will result in reduced clamping force, poor concentricity, possible damage to the collet, and poor chip evacuation. oolant delivered from the spindle through the knob and exits through the cutting tool. PROPER USAGE OF OLLET HUK AND AK UP SREWS Many solutions for high velocity and extreme machining available upon request Standard Thru oolant TOOLHOLDING Using a screw as a stop screw will result in reduced concentricity and limited grip force. The proper selection of collet nut and collet type will provide adequate drive force for most machining operations
6 TOOLHOLDING TOOLHOLDING 10 Performance Selection Guide Performance Selection Guide 11 Performance Selection Production ER System Performance huck with Standard Flush Nut, alanced to G2.5 PART NUMER: 40-16ERF300, pages AD/ PART NUMER: 40-16ERF300 Standard Grade ollet PART NUMER: -0250, pages Production ER System Performance huck with Standard Flush Nut, alanced to G2.5 PART NUMER: 40-16ERF300, pages AD/ PART NUMER: 40-16ERF300 Standard Grade ollet PART NUMER: ERS , pages OLLET HUK PERFORMANE HOIES High Performance ER System Performance huck with Power Nut, alanced to G2.5 PART NUMER: 40-16ERP312, pages AD/ PART NUMER: 40-16ERP312 Standard Grade ollet PART NUMER: -0250, pages Performance Selection with oolant Delivery Options Performance ER System Performance huck with oolant Seal Nut, alanced to G2.5 PART NUMER: 40-16ER322, pages AD/ PART NUMER: 40-16ER322 Standard Grade ollet and Nut Seal PART NUMER: -0250, pages PART NUMER: S , page 36 High Performance Plus ER System Performance huck with Power Nut, alanced to G2.5 PART NUMER: 40-16ERP312, pages AD/ PART NUMER: 40-16ERP312 Grade AA, 5 Micron ollet PART NUMER: 5UM-0250, pages Performance Plus ER System Performance huck with oolant Seal Nut, alanced to G2.5 PART NUMER: 40-16ER322, pages AD/ PART NUMER: 40-16ER322 Grade AA, 5 Micron ollet and ollet Nut Seal PART NUMER: 5UM-0250, pages PART NUMER: S , page 36 ER Standard ollet ollet Selection ER STANDARD OLLET (ER Standard ollets see page 27-29) ER TAP OLLETS (ER Tap ollets see page 30) ER Tap ollet ER AA GRADE 5 MIRON OLLET (ER AA Grade 5 Micron ollets see page 31-33) OLLET PERFORMANE HOIES ER AA Grade 5 Micron ollet ollet Selection with oolant Options ERS STEEL SEALED OLLET (ER Steel Sealed ollets see page 34-35) OOLANT NUT SEAL SYSTEM (oolant Seals see page 36 & oolant Nuts see page 38) ERS Steel Sealed ollet For use in ER collet chucks for drilling, reaming, boring, tapping, and milling. Meets DIN industry standard. ollapse range.0393 (1 mm) maximum. Size 11 collapse range.020 (1/2 mm) maximum. For higher runout tolerance use HIGH ONENTRIITY AA GRADE 5 MIRON OLLETS Designed for use with production ER Tapping tools. Provide maximum concentricity with positive driving force. Evenly distributed cutting edges for high performance machining (5 micron) gage tolerance. Exceeds DIN requirements. Recommended use on size. 12 slots, deburred and polished. Increased grip force with reduced friction to collet seat. Improve system performance and lower cost per piece when used with a quality chuck. For use with regular straight shank tools. Withstands coolant pressure up to 1,800 psi. ollet collapse is.005. oolant Nut oolant Seal Allows full range of collet when used with standard collets. Allows coolant seal with AA grade 5 micron collets. Prevents abrasive machining dust of chips from contaminating collet system. Seals up to 1, 200 psi. TYPE ER11 LENGTH (L) DIAMETER (D)
7 TOOLHOLDING TOOLHOLDING 12 Production ER ollet huck with Flush Nut Production ER ollet huck with Flush Nut 13 PRODUTION ER OLLET SYSTEM WITH DIN FLUSH NUT Production ER ollet huck with Flush Nut ollet hoices ER Standard ollet ER Tap ollet ER AA Grade 5 Micron ollet onstructed of alloy steel for long, durable service life. Hardened to Rc: to avoid damaging collet chuck threads. ollet seat taper T.I.R Accepts DIN 6499 collets. ollet huck Taper T 30 T 40 AT 40 AT 50 HSK 63A HSK 100A alance Up To 20,000 RPM 20,000 RPM ERS Steel Sealed ollet alanced to G 2.5 T 30 ALANED UP TO Size with AD/ oolant ollets sold separately with SimulFit (Dia.) Socket Depth ollet Nut Nut Torque 30-16ERF236-30F-16ERF ERHN 52 ft. lbs. S ERF236-30F-20ERF ERHN 74 ft. lbs. S ERF236-30F-32ERF ERN 125 ft. lbs. S-18 T 40 ALANED UP TO /U Screw Size with AD/ oolant with SimulFit (Dia.) Socket Depth ollet Nut Nut Torque /U Screw ER ERF ERF ERHN 22 ft. lbs ERF ERF ERF300 40F-16ERF ERF ERF400 40F-16ERF ERHN 52 ft. lbs. S ERF ERF ERF ERF ERHN 74 ft. lbs. S ERF ERF ERN 95 ft. lbs. S ERF ERF400 40F-32ERF ERF600-40F-32ERF ERN 125 ft. lbs. S ERF ERF ERF ERN 162 ft. lbs. S-10 OLLET RANGE SPEIFIATIONS ollet Size Range Inch Range Metric ollet Nut Nut Torque /U Screw Not ER to mm to 7 mm 11ERHN 22 ft. lbs to mm to 13 mm 16ERHN 52 ft. lbs. S to mm to 13 mm 20ERHN 74 ft. lbs. S to mm to 16 mm 25ERN 95 ft. lbs. S to mm to 20 mm 32ERN 125 ft. lbs. S to mm to 30 mm 40ERN 162 ft. lbs. S-10
8 TOOLHOLDING TOOLHOLDING 14 Production ER ollet huck with Flush Nut Production ER ollet huck with Flush Nut 15 Optional AD/ oolant Flange Entry onvertible alanced to G 2.5 ollets sold separately alanced to G 2.5 ollets sold separately AT 40 ALANED UP TO AT 50 ALANED UP TO 20,000 RPM Size ER11 with AD/ oolant with SimulFit (Dia.) Socket Depth ollet Nut Nut Torque /U Screw 40-11ERF ERF ERHN 22 ft. lbs ERF ERF ERF250 40F-16ERF ERF ERF ERF ERF400 40F-16ERF ERHN 52 ft. lbs. S ERF ERF ERF800-40F-16ERF ERF ERF ERF ERF ERF ERF600 40F-20ERF ERHN 74 ft. lbs. S ERF ERF ERF ERF ERF ERN 95 ft. lbs. S ERF ERF ERF ERF ERF ERF300 40F-32ERF ERF ERF400 40F-32ERF ERN 125 ft. lbs. S ERF ERF600 40F-32ERF ERF ERF ERF ERF ERN 162 ft. lbs. S-10 Size with AD/ oolant 50-16ERF ERF400 50F-16ERF ERF ERF600 50F-16ERF ERF800-50F-16ERF ERF ERF ERF ERF ERF ERF ERF ERF ERF ERF ERF ERF ERF ERF400 50F-32ERF ERF ERF600 50F-32ERF ERF800-50F-32ERF ERF ERF ERF400 50F-40ERF ERF ERF ERF ERF with SimulFit (Dia.) Socket Depth ollet Nut Nut Torque /U Screw ERHN 52 ft. lbs. S ERHN 74 ft. lbs. S ERN 95 ft. lbs. S ERN 125 ft. lbs. S ERN 162 ft. lbs. S-10
9 TOOLHOLDING TOOLHOLDING 16 Production ER ollet huck with Flush Nut High Performance ER ollet huck with Power Nut 17 HIGH PERFORMANE ER OLLET HUK WITH POWER NUT alanced to G 2.5 ollets sold separately HSK 63 FORM A ALANED UP TO Size (Dia.) Socket Depth ollet Nut Nut Torque /U Screw H63-16ERF H63-16ERF ERHN 52 ft. lbs. S-20 H63-20ERF ERHN 74 ft. lbs. S-09 H63-25ERF ERN 95 ft. lbs. S-11 H63-32ERF H63-32ERF ERN 125 ft. lbs. S H63-32ERF H63-40ERF ERN 162 ft. lbs. S-10 HSK 100 FORM A ALANED UP TO 20,000 RPM Size (Dia.) Socket Depth ollet Nut Nut Torque /U Screw H100-16ERF H100-16ERF ERHN 52 ft. lbs. S-20 H100-20ERF H100-20ERF ERHN 74 ft. lbs. S-09 H100-25ERF ERN 95 ft. lbs. S-11 H100-32ERF H100-32ERF ERN 125 ft. lbs. S-18 H100-40ERF H100-40ERF ERN 162 ft. lbs. S-10 High Performance ER ollet huck with Power Nut ollet hoices ER Standard ollet ER Tap ollet ER AA Grade 5 Micron ollet onstructed of alloy steel for long, durable service life. Hardened to Rc: to avoid damaging collet chuck threads. ollet seat taper T.I.R Accepts DIN 6499 collets. ollet huck Taper T 30 T 40 AT 40 AT 50 HSK 63A HSK 100A ERS Steel Sealed ollet alance Up To 20,000 RPM 20,000 RPM OLLET RANGE SPEIFIATIONS ollet Size Range Inch Range Metric ollet Nut Nut Torque /U Screw.020 to mm to 10 mm 16ERHPN 42 ft. lbs. S to mm to 13 mm 20ERHPN 60 ft. lbs. S to mm to 16 mm 25ERPN 86 ft. lbs. S to mm to 20 mm 32ERPN 100 ft. lbs. S to mm to 30 mm 40ERPN 146 ft. lbs. S-10
10 TOOLHOLDING TOOLHOLDING 18 High Performance ER ollet huck with Power Nut High Performance ER ollet huck with Power Nut 19 Optional AD/ oolant Flange Entry onvertible Optional AD/ oolant Flange Entry onvertible alanced to G 2.5 ollets sold separately alanced to G 2.5 ollets sold separately T 30 ALANED UP TO Size T 40 ALANED UP TO Size with AD/ oolant with SimulFit (Dia.) Socket Depth ollet Nut Nut Torque /U Screw 30-16ERP248-30F-16ERP ERHPN 42 ft. lbs. S ERP248-30F-20ERP ERHPN 60 ft. lbs. S ERP248-30F-32ERP ERPN 100 ft. lbs. S-18 with AD/ oolant with SimulFit (Dia.) Socket Depth ollet Nut Nut Torque /U Screw 40-16ERP ERP ERP312 40F-16ERP ERP ERP ERHPN 42 ft. lbs. S ERP ERP512 40F-16ERP ERP ERHPN 60 ft. lbs. S ERP ERP ERPN 86 ft. lbs. S ERP ERP ERP412 40F-32ERP ERPN 100 ft. lbs. S ERP612-40F-32ERP ERP ERP ERPN 146 ft. lbs. S ERP AT 40 ALANED UP TO Size with AD/ oolant with SimulFit (Dia.) 40-16ERP ERP262 40F-16ERP ERP ERP ERP412 40F-16ERP ERP ERP ERP812-40F-16ERP ERP ERP ERP ERP ERP ERP612 40F-20ERP ERP ERP ERP ERP ERP ERP ERP612 40F-20ERP ERP ERP ERP312 40F-32ERP ERP ERP412 40F-32ERP ERP ERP612 40F-32ERP ERP ERP ERP ERP Socket Depth ollet Nut Nut Torque /U Screw ERHPN 42 ft. lbs. S ERHPN 60 ft. lbs. S-09 25ERPN 86 ft. lbs. S ERPN 100 ft. lbs. S ERPN 146 ft. lbs. S-10
11 TOOLHOLDING TOOLHOLDING 20 High Performance ER ollet huck with Power Nut High Performance ER ollet huck with Power Nut 21 Optional AD/ oolant Flange Entry onvertible alanced to G 2.5 ollets sold separately alanced to G 2.5 ollets sold separately AT 50 ALANED UP TO 20,000 RPM Size with AD/ oolant with SimulFit (Dia.) 50-16ERP ERP412 50F-16ERP ERP ERP612 50F-16ERP ERP812-50F-16ERP ERP ERP ERP ERP ERP ERP ERP ERP ERP ERP ERP ERP ERP ERP412 50F-32ERP ERP ERP612 50F-32ERP ERP812-50F-32ERP ERP ERP ERP412 50F-40ERP ERP ERP ERP ERP Socket Depth ollet Nut Nut Torque /U Screw ERHPN 42 ft. lbs. S ERHPN 60 ft. lbs. S ERPN 86 ft. lbs. S ERPN 100 ft. lbs. S ERPN 146 ft. lbs. S-10 HSK 63 FORM A ALANED UP TO Socket Depth ollet Nut Nut Torque /U Screw Size (Dia.) H63-16ERP H63-16ERP ERHPN 42 ft. lbs. S-20 H63-20ERP ERHPN 60 ft. lbs. S-09 H63-25ERP ERPN 86 ft. lbs. S-11 H63-32ERP ft. lbs. S-18 H63-32ERP ERPN ft. lbs. S-18 H63-32ERP H63-40ERP ERPN 146 ft. lbs. S-10 HSK 100 FORM A ALANED UP TO 20,000 RPM Size (Dia.) Socket Depth ollet Nut Nut Torque /U Screw H100-16ERP H100-16ERP ERHPN 42 ft. lbs. S-20 H100-20ERP H100-20ERP ERHPN 60 ft. lbs. S-09 H100-25ERP ERPN 86 ft. lbs. S-11 H100-32ERP H100-32ERP ERPN 100 ft. lbs. S-18 H100-40ERP H100-40ERP ERPN 146 ft. lbs. S-10
12 TOOLHOLDING TOOLHOLDING 22 Performance ER ollet huck with oolant Nut Performance ER ollet huck with oolant Nut 23 PERFORMANE ER OLLET SYSTEM WITH OOLANT NUT Performance ER ollet System with oolant Nut ollet hoices oolant Nut Seals see page 82 onstructed of alloy steel for long, durable service life. Hardened to Rc: to avoid damaging collet chuck threads. ollet seat taper T.I.R Accepts DIN 6499 collets. ollet huck Taper T 30 T 40 AT 40 AT 50 HSK 63A HSK 100A alance Up To 20,000 RPM 20,000 RPM alanced to G 2.5 T 40 ALANED UP TO Size ollets sold separately with AD/ oolant with SimulFit (Dia.) Socket Depth ollet Nut Nut Torque /U Screw 40-16ER ER ER322 40F-16ER ER ER ERHN 52 ft. lbs. S ER ER522 40F-16ER ER ER ERHN 74 ft. lbs. S ER ER ERN 95 ft. lbs. S ER ER422 40F-32ER ER622-40F-32ER ERN 125 ft. lbs. S ER ER ER ERN 162 ft. lbs. S-10 ER Standard ollet ER Tap ollet ER AA Grade 5 Micron ollet ERS Steel Sealed ollet OLLET RANGE SPEIFIATIONS Range Inch Range Metric ollet Nut Nut Torque /U Screw ER to mm to 7 mm 11ERHN 22 ft. lbs to mm to 10 mm 16ERHN 52 ft. lbs. S to mm to 13 mm 20ERHN 74 ft. lbs. S to mm to 16 mm 25ERN 95 ft. lbs. S to mm to 20 mm 32ERN 125 ft. lbs. S to mm to 30 mm 40ERN 162 ft. lbs. S-10
13 TOOLHOLDING TOOLHOLDING 24 Performance ER ollet huck with oolant Nut Performance ER ollet huck with oolant Nut 25 Optional AD/ oolant Flange Entry onvertible Optional AD/ oolant Flange Entry onvertible alanced to G 2.5 ollets sold separately alanced to G 2.5 ollets sold separately AT 40 ALANED UP TO Size with AD/ oolant 40-16ER ER272 40F-16ER ER ER ER ER422 40F-16ER ER ER522 40F-16ER ER822-40F-16ER ER ER ER ER ER ER622 40F-20ER ER ER ER ER ER ER ER622 40F-25ER ER ER322 40F-32ER ER ER422 40F-32ER ER ER622 40F-32ER ER ER ER ER with SimulFit (Dia.) Socket Depth ollet Nut Nut Torque /U Screw ERHN 52 ft. lbs. S ERHN 74 ft. lbs. S-09 25ERN 95 ft. lbs. S ERN 125 ft. lbs. S ERN 162 ft. lbs. S-10 AT 50 ALANED UP TO 20,000 RPM Size with AD/ oolant 50-16ER ER422 50F-16ER ER ER622 50F-16ER ER822-50F-16ER ER ER ER ER ER ER ER ER ER ER ER ER ER ER422 50F-32ER ER ER622 50F-32ER ER822-50F-32ER ER ER ER422 50F-40ER ER ER ER ER with SimulFit (Dia.) Socket Depth ollet Nut Nut Torque /U Screw ERHN 52 ft. lbs. S ERHN 74 ft. lbs. S ERN 95 ft. lbs. S ERN 125 ft. lbs. S ERN 162 ft. lbs. S-10
14 TOOLHOLDING TOOLHOLDING 26 Performance ER ollet huck with oolant Nut ER Standard ollets 27 RELIALE LAMPING SYSTEM FOR PRODUTION WORK L D alanced to G 2.5 ollets sold separately ER Standard ollet * For specifications see page 11 HSK 63 FORM A ALANED UP TO Size (Dia.) Socket Depth ollet Nut Nut Torque /U Screw H63-16ER H63-16ER ERHN 52 ft. lbs. S-20 H63-20ER ERHN 74 ft. lbs. S-09 H63-25ER ERN 95 ft. lbs. S-11 H63-32ER H63-32ER ERN 125 ft. lbs. S H63-32ER H63-40ER ERN 162 ft. lbs. S-10 HSK 100 FORM A ALANED UP TO 20,000 RPM Size (Dia.) Socket Depth ollet Nut Nut Torque /U Screw H100-16ER H100-16ER ERHN 52 ft. lbs. S-20 H100-20ER H100-20ER ERHN 74 ft. lbs. S-09 H100-25ER ERN 95 ft. lbs. S-11 H100-32ER H100-32ER ERN 125 ft. lbs. S-18 H100-40ER H100-40ER ERN 162 ft. lbs. S-10 ER11 STANDARD OLLETS - METRI PART NUMER ER11 Metric ER ER ER ER ER ER ER ER ER ER ER ER ER Metric Range.5-1 mm mm 1-2 mm mm 2-3 mm mm 3-4 mm mm 4-5 mm mm 5-6 mm mm 6-7 mm SETS ER11 Metric Set ER11-S013 PART NUMER 13 Pieces NUMER OF PIEES.5-7 mm RANGE ER11 STANDARD OLLETS - INH PART NUMER ER11 Inch Inch Range ER ER ER ER ER ER ER SETS ER11 Inch Set ER11-S007 PART NUMER 7 Pieces NUMER OF PIEES 1/16-1/4 RANGE
15 TOOLHOLDING TOOLHOLDING 28 ER Standard ollet ER Standard ollets - ER STANDARD OLLETS - INH PART NUMER Inch Inch Inch Inch Inch Inch Range Inch Set Inch Set Inch Set Inch Set Inch Set SETS -S012 -S014 -S016 -S022 -S024 PART NUMER 12 Pieces 14 Pieces 15 Pieces 22 Pieces 24 Pieces NUMER OF PIEES 1/16-13/32 3/32-1/2 3/16-5/8 3/32-3/4 9/32-1 RANGE L * For specifications see page 11 D ER Standard ollets 29 - ER STANDARD OLLETS - METRI PART NUMER Metric Metric Metric Metric Metric Metric Range mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Metric Set Metric Set Metric Set Metric Set Metric Set SETS -S010 -S012 -S015 -S018 -S023 PART NUMER 10 Pieces 12 Pieces 15 Pieces 18 Pieces 23 Pieces NUMER OF PIEES 1-10 mm x 1 mm 2-13 mm 2-16 mm 3-20 mm 4-26 mm RANGE
16 TOOLHOLDING TOOLHOLDING 30 ER Tap ollets ER Grade AA 5 Micron ollets 31 PROVIDES MAXIMUM TAP ONENTRIITY WITH POSITIVE DRIVE FORE THE NEW STANDARD IN PERFORMANE GRADE TOOL HOLDING L L D D ER Tap ollet * For specifications see page 11 ER AA Grade, 5 Micron ollet * For specifications see page 11 - ER TAP OLLETS INH METRI PART NUMER Inch Range ANSI Metric ERT16-# ERT32-#0-6 - #0-#6 ERT16-#8 ERT20-#8 ERT25-#8 ERT32-#8 - #8 M4 ERT16-#10 ERT20-#10 ERT25-#10 ERT32-#10 - #10 M4.5, M5 ERT16-#12 ERT20-#12 ERT25-#12 ERT32-#12 - # ERT25-012N ERT32-012N ERT40-012N 1/8" NPT ERT ERT ERT ERT ERT /4" M6,M ERT32-025N ERT40-025N 1/4" NPT ERT ERT ERT ERT ERT /16" M7, M8 ERT ERT ERT ERT ERT /8" M ERT40-037N 3/8" NPT ERT ERT ERT ERT ERT /16" ERT ERT ERT ERT ERT /2" M12,M ERT40-050N 1/2" NPT - - ERT ERT ERT /16" M ERT ERT ERT /8" M ERT ERT /16" M ERT ERT /4" ERT ERT /16" M ERT /8" M ERT /16" M ERT " M25 Inch Set Inch Set Inch Set Inch Set Inch Set SETS ERT16-S009 ERT20-S008 ERT25-S011 ERT32-S016 ERT40-S017 PART NUMER 9 Pieces 8 Pieces 11 Pieces 16 Pieces 17 Pieces NUMER OF PIEES AA GRADE 5 MIRON ER PREISION OLLETS - ER 11 PART NUMER ER11 METRI Recommended Usage =/-.004 (.1 mm) Maximum ollapse Range 5UMER mm 0.5 mm 5UMER mm 0.5 mm 5UMER mm 0.5 mm 5UMER mm 0.5 mm 5UMER mm 0.5 mm 5UMER mm 0.5 mm 5UMER mm 0.5 mm 5UMER mm 0.5 mm 5UMER mm 0.5 mm 5UMER mm 0.5 mm 5UMER mm 0.5 mm 5UMER mm 0.5 mm 5UMER mm 0.5 mm PART NUMER ER11 INH Recommended Usage =/-.004 (.1 mm) Maximum ollapse Range 5UMER / mm 5UMER / mm 5UMER /8 0.5 mm 5UMER / mm 5UMER / mm 5UMER / mm 5UMER /4 0.5 mm SETS ER11 Metric Set ER11 Inch Set PART NUMER 5UMER11-SM013 5UMER11-SI007 NUMER OF PIEES 13 Pieces 13 Pieces RANGE 1-7 mm 1/16-1/4
17 TOOLHOLDING TOOLHOLDING 32 ER Grade AA 5 Micron ollets L ER Grade AA 5 Micron ollets 33 L D D ER AA Grade, 5 Micron ollet ER AA Grade, * For specifications see page 11 5 Micron ollet * For specifications see page 11 AA GRADE 5 MIRON ER PREISION OLLETS - INH PART NUMER Inch Inch Inch Inch Inch Recommended Usage =/-.004 (.1 mm) Maximum ollapse Range 5UM /16" 0.5 mm 5UM /32" 0.5 mm 5UM UM UM UM UM /8" 1 mm 5UM UM UM UM UM /32" 1 mm 5UM UM UM UM UM /16" 1 mm 5UM /32" 1 mm 5UM UM UM UM UM /4" 1 mm 5UM /32" 1 mm 5UM UM UM UM UM /16" 1 mm 5UM /32" 1 mm 5UM UM UM UM UM /8" 1 mm 5UM /32" 1 mm 5UM UM UM UM /16" 1 mm 5UM UM UM UM /32" 1 mm 5UM UM UM UM /2" 1 mm 5UM UM UM /16" 1 mm 5UM UM UM /8" 1 mm 5UM UM /16" 1 mm 5UM UM /4" 1 mm 5UM UM /16" 1 mm 5UM /8" 1 mm 5UM " 1 mm Inch Set Inch Set Inch Set Inch Set Inch Set SETS 5UM-SI010 5UM-SI009 5UM-SI011 5UM-SI014 5UM-SI016 PART NUMER 10 Pieces 9 Pieces 11 Pieces 14 Pieces 16 Pieces NUMER OF PIEES 3/32-3/8 1/16 and 13/32 not included in set 1/8-1/2 1/8-5/8 1/8-13/16 1/8-1 RANGE AA GRADE 5 MIRON ER PREISION OLLETS - METRI PART NUMER Metric Metric Metric Metric Metric Recommended Usage =/-.004 (.1 mm) Maximum ollapse Range 5UM mm 0.5 mm 5UM UM UM mm 0.5 mm 5UM UM UM UM mm 1 mm 5UM UM UM UM UM mm 1 mm 5UM UM UM UM UM mm 1 mm 5UM UM UM UM UM mm 1 mm 5UM UM UM UM UM mm 1 mm 5UM UM UM UM UM mm 1 mm 5UM UM UM UM UM mm 1 mm 5UM UM UM UM UM mm 1 mm 5UM UM UM UM mm 1 mm 5UM UM UM UM mm 1 mm 5UM UM UM UM mm 1 mm 5UM UM UM mm 1 mm 5UM UM UM mm 1 mm 5UM UM UM mm 1 mm 5UM UM mm 1 mm 5UM UM mm 1 mm 5UM UM mm 1 mm 5UM UM mm 1 mm 5UM mm 1 mm 5UM mm 1 mm 5UM mm 1 mm 5UM mm 1 mm 5UM mm 1 mm 5UM mm 1 mm Metric Set Metric Set Metric Set Metric Set Metric Set SETS 5UM-SM010 5UM-SM012 5UM-SM015 5UM-SM018 5UM-SM023 PART NUMER 10 Pieces 12 Pieces 15 Pieces 18 Pieces 23 Pieces NUMER OF PIEES 1-10 mm 2-13 mm 2-16 mm 3-20 mm 4-26 mm RANGE
18 TOOLHOLDING TOOLHOLDING 34 ERS Steel Sealed ollets ERS Steel Sealed ollets 35 DESIGNED FOR ALL ER PRODUTION AND PERFORMANE OOLANT APPLIATIONS L L D D * For specifications see page 11 ERS Steel Sealed ollet * For specifications see page 11 ERS Steel Sealed ollet - STEEL SEALED OLLETS - INH PART NUMER Inch Inch Inch Inch Inch Inch Range ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS ERS Inch Set Inch Set Inch Set Inch Set Inch Set SETS ERS16-S010 ERS20-S011 ERS25-S016 ERS32-S021 ERS40-S020 PART NUMER 10 Pieces 11 Pieces 16 Pieces 21 Pieces 20 Pieces NUMER OF PIEES 1/8-13/32 5/32-1/2 5/32-5/8 5/32-17/32 1/4-1 RANGE - STEEL SEALED OLLETS - METRI PART NUMER Metric Metric Metric Metric Metric Metric Range ERS ERS ERS ERS mm ERS ERS ERS ERS mm ERS ERS ERS ERS ERS mm ERS ERS ERS ERS ERS mm ERS ERS ERS ERS ERS mm ERS ERS ERS ERS ERS mm ERS ERS ERS ERS ERS mm ERS ERS ERS ERS mm ERS ERS ERS ERS mm ERS ERS ERS ERS mm ERS ERS ERS mm ERS ERS ERS mm ERS ERS ERS mm ERS ERS mm ERS ERS mm ERS ERS mm ERS ERS mm ERS mm ERS mm ERS mm ERS mm ERS mm ERS mm ERS mm Metric Set Metric Set Metric Set Metric Set Metric Set SETS ERS16-S007 ERS20-S010 ERS25-S013 ERS32-S017 ERS40-S021 PART NUMER 7 Pieces 10 Pieces 13 Pieces 17 Pieces 21 Pieces NUMER OF PIEES 4-10 mm 4-13 mm 4-16 mm 4-20 mm 6-26 mm RANGE
19 TOOLHOLDING TOOLHOLDING 36 oolant Nut Seals Straight Shank ollet hucks 37 - OOLANT NUT SEALS PART NUMER Metric/Inch Metric/Inch Metric/Inch Metric/Inch Metric/Inch Metric Range Inch Range S S S S S mm S S S S S mm S S S S S mm S S S S S mm S S S S S mm S S S S S mm S S S S S mm S S S S S mm S S S S S mm S S S S S mm S S S S S mm S S S S S mm S S S S S mm S S S S S mm S S S S mm S S S S mm S S S S mm S S S S mm S S S S mm S S S S mm S S S mm S S S mm S S S mm S S S mm S S S mm S S S mm S S mm S S mm S S mm S S mm S S mm S S mm S S mm S S mm S mm S mm S mm S mm S mm S mm S mm S mm S mm S mm S mm S mm oolant Nut Seal ER Extension ER11 OLLET SERIES.020 TO.275 (.5MM TO 7MM) A (Dia.) (Dia.) D OAL omp Nut Stop Screw Nut Tightening Torque ER H LN-ER ft. lbs. EN56W ER H LN-ER ft. lbs. EN56W ER H ERHN ft. lbs. 300NW OLLET SERIES.020 TO.393 (.5MM TO 10MM) A (Dia.) (Dia.) D OAL omp Nut Stop Screw Nut Tightening Torque ERHPN S ft. lbs. EN20W ERHPN S ft. lbs. EN20W H LN- S ft. lbs. EN78W OLLET SERIES.039 TO.511 (1MM TO 13MM) A (Dia.) (Dia.) D OAL ollet Nut Stop Screw Nut Tightening Torque H LN- S-SF5818LH ft. lbs. EN20W H ERN 029-E08 60 ft. lbs. 20ERENW H ERHPN 029-E12 60 ft. lbs. 20ERHNW OLLET SERIES.039 TO.630 (1MM TO 16MM) A (Dia.) (Dia.) D OAL omp Nut Stop Screw Nut Tightening Torque EREN 029-E12 86 ft. lbs. 25ERENW ERN 029-E12 86 ft. lbs. 25ERNW ERPN 029-E12 86 ft. lbs. 25ERNW OLLET SERIES.078 TO.787 (2MM TO 20MM) A (Dia.) (Dia.) D OAL omp Nut Stop Screw Nut Tightening Torque ERPN S ft. lbs. 32ERNW ERPN S ft. lbs. 32ERNW ERPN S ft. lbs. 32ERNW OLLET SERIES.118 TO (3MM TO 30MM) A (Dia.) (Dia.) D OAL omp Nut Stop Screw Nut Tightening Torque ERN 029-E ft. lbs. 40ERNW ERPN 029-E ft. lbs. 40ERNW Other sizes available upon request. Please call Parlec or your local Parlec representative for more information. A D Wrench Wrench Wrench Wrench Wrench Wrench
20 TOOLHOLDING ack Up Screws, Nuts and ollet Wrenches 38 ER TYPE 1 & 2 AKUP SREWS Type S-20 Type 2 S-09 S-10 S-11 S-18 - A 5/32 3/16 3/16 5/16 3/16 7/32 1/4 9/16 9/16 9/16 9/16 3/8 Thread Left Hand 5/ / / / / /16-20 A A e sure to check out other solutions that Parlec offers. A Precision Modular oring Type I Standard with oolant Hole Type II Standard with oolant Hole Type III oolant with Nylon Seal STANDARD WRENHES 300NW EN20W 20ERHNW 25ERNW 32ERNW 40ERNW ollet Series ER11 Style Hex Hex Hex Open End Wrench EN20W shown here. Fixed Wrench 32ERNW shown here. Torque Wrench TW-150 shown here. Nose sold separately. TORQUE WRENHES TW-45 TW-150 TW-220 Range 5-45 ft. lbs ft. lbs ft. lbs. Length ER Size Size and Style 1 Hex 1 3/16 Hex Standard Wrench EN20W 20ERHNW 25ERNW 32ERNW 40ERNW ER Size ER Tapping Solutions Size and Style 11/16 Hex 1 Hex 1 3/16 Hex Power Nut Standard Wrench 300NW EN20W 20ERHNW 25ERNW 32ERNW 40ERNW Torque Wrench Nose TWN-16ERHNW TWN-20ERHNW TWN-25ERNW TWN-32ERNW TWN-40ERNW ER Size Size and Style Standard Wrench Hex EN20W 16ERHN 1 3/16 Hex 20ERHNW 20ERHN ERNW 25ERN ERNW 32ERN 40ERNW 40ERN Other sizes available upon request. Please call Parlec or your local Parlec representative for more information Torque Wrench Nose TWN-16ERHNW TWN-20ERHNW TWN-25ERNW TWN-32ERNW TWN-40ERNW Process, Automate, onnect Parlec Tool Measuring Machine - TMM Flush Nut OOLANT NUTS FOR USE WITH OOLANT NUT SEALS ERos Toolholding Systems Torque Wrench Nose TWN-16ERHNW TWN-20ERHNW TWN-25ERNW TWN-32ERNW TWN-40ERNW FLUSH NUTS FOR MINIMUM OVERHANG 11ERHN 16ERHN 20ERHN 25ERN 32ERN 40ERN Evolution Line Angle Heads Torque Wrench Nose TWN-32ERNW shown here. POWER NUTS FOR MAXIMUM GRIP FORE AND ONENTRIITY 16ERHPN 20ERHPN 25ERPN 32ERPN 40ERPN SimulFit Toolholding Solutions For a complete listing of Parlec literature visit us at Y ANY MEASURE oolant Nut Measurably etter
21 Y ANY MEASURE Measurably etter Americas Tel: Fax: Asia Pacific Tel: Fax: Europe Tel: Fax: Headquarters 101 Perinton Parkway Fairport, NY USA For a quotation, please contact TOOL-USA ( ) or visit Parlec, Inc. All rights reserved. Y-ERTH-SS15 Made in U.S.A.
SIMULFIT TOOLHOLDING SOLUTIONS
SIMULFIT SOLUTIONS HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the manufacturing of Sulky Hubs. 1973 Parlec begins producing and distributing the Numertap and Autofacer
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationER Collet Chucks TOOLHOLDING
ER Collet Chucks All ER collet chuck tapers meet or exceed approprate standards. See Techncal Secton n front of catalog for specfcatons. BALANCEABLE AVAILABLE Constructed of alloy steel for long, durable
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationHPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System
HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationFOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
More informationDriven & Static Tooling Citizen
Driven & Static Tooling Driven & Static Tooling 3 Table of Contents Tooling K12 & K16 Driven Tools.... 3 M20, M32 Series 3 Driven Tools.... 4 M20, M32 Series 3 Static Tools... 7 M32 Series 5 Only Driven
More informationStatic & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form
More informationSHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
More informationNAKAMURA TOME LIVE TOOLING
NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000
More informationDRILL CHUCKS-KEY TYPE
HUK JWS LTHE WORKHOLDING MHINE VISES RETENTION KNOS ER, D, TG OLLETS INDEXLE DRILLS TURNING & ORING TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD DRILL HUKS-KEY TYPE LL ERING HUKS all
More informationNo. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
More informationCOLLET HOLDER. CTA type. CTH type For high-speed. 3 times longer cutter life with using high-precision collet
OET HOER M/ TOO OET HOER Ultra precision taper collet chuck The best-suited base holder applicable to all the kinds of machining This holder meets all the requirements for high-speed cutting; Accuracy,
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationBMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
More informationCAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationCnC woodworking Collets
CnC woodworking Collets SE00- SE0- SE0 Nut SyoZ 0 FoR woodworking MAChIneS (RDo0) This collet used on.hp and HP dual end Perske motors Description Length Inside SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ
More informationToolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
More informationOperation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation. Figure l
Operation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation Major Components Figure l Basic Operation: High pressure coolant enters the Titespot Angle Head and drives an integral
More informationP: F:
TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either
More informationCollet Chucks for 5C / 16C / 3J Collets
Precision Workholding Technology ollet hucks for 5 / 16 / 3J ollets 5W Wide Opening ollet hucks www..com 5-ND Dead Length ollet hucks huck Features Dead length design with reduced nose for full size machines
More informationHIGH PRECISION HIGH PERFORMANCE
Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
More informationCOOLANT-FED TOOLING & SYSTEMS
V-FLNGE ER OLLET HUK SINGLE PIN FE SEL ROTRY GLND SSEMLY PRT NUMER RNGE OLLET SERIES DIMETER PROJ. D TR TO TR GLND (INLUDED) MINIMUM PRESSURE (1) MXIMUM PRESSURE (2) MXIMUM SPEED (RPM) (3) REPLEMENT SEL
More informationVýhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)
HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16
More informationDV Shank Tools DV40...F2 F37 DV50...F38 F71
DV Shank Tools DV40..................................................................................F2 F37 DV50.................................................................................F38 F71
More informationCALL US WITH YOUR MACHINE MAKE & MODEL. WHETHER YOU NEED COOLANT THRU OR SOLID, WE WILL FIND THE RETENTION KNOB FOR YOU!
RETENTION KNOBS For CAT40, CAT50, BT0, BT40 & BT50 CAT40 Retention Knobs 5/8 Description DWG. T A L HOLE? Socket X70A 40EA / A45.440(C.8) A A.65 45.5 Y RKW40 X70A 40EA / A45.440 A A.65 45.5 N RKW40 X704A
More informationTable of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
More informationOperation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation
Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation General The Eltool Livetool Angle Heads can provide years of service if properly used and maintained. The Livetool uses
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationHigh Speed Spindles Series
High Speed Spindles Series onstant High Speed and Torque 25,000-90,000 rpm,
More informationDOOSAN LIVE & STATIC TOOLING
DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800
More informationCTA. CTH For high-speed. 6 taper. 16 taper. The optimum holder choices for a variety of applications. Ideal taper angle. Precision spring collet
SK-T ing Systems for Turning Mill M/ OET OER ANGE EA OET OER Taper collet chuck The optimum holder choices for a variety of applications TA General Purpose coolant-through oolant- Through utter SUKIMA
More informationInstallation Instructions
Installation Instructions TM Five Star Seal 80 Series Single, cartridge mounted, flexible stator pusher seal designed for general service applications 84 and 85 Experience In Motion Description The 84/85
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationFIXED GRIPPERS Page Number Part # Prefix ROUND STYLE QUICK INDEX
QUIK INDEX TG GRIPSERTS GRIPPER SYSTEM Page Number Part # Prefix TG GripSerts...8...TG Jaw Set / Retrofit / Kurt 6"...9...TGJ Screws and Protective overs...9...tg Screwdriver / Wrench / Accessories...9...TG
More informationROYAL LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
ROYAL LOW-PROFILE ACCU-LENGTH High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because they are
More informationCollet Chucks and Collets
ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16
More informationpowrgrip for mold & die Trustworthy toolholding solutions
powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling
More informationInstallation Instructions
Installation Instructions CPM Series Dual, cartridge mounted, flexible stator pusher seal designed for general service applications CPM PP Experience In Motion Description The CPM PP seal is a cartridge
More informationMEGA5 Series Bridge Type 5-Axis Machining Centers
Series ridge Type 5-xis Machining enters WE MEHNTRONI O., LT. HEQURTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FX : +886-3-588-5194 Website :
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationWhat is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features
ROLLERmANUAL Table of Contents What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features Applications Questions to Ask 2
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More informationDRIVEN TOOLS ASK ABOUT OUR PRICE MATCH GUARANTEE WE INVITE INQUIRIES FOR OKUMA, NAKAMURA, MIYANO, BIGLIA
2018 Winter/Spring Flyer Pricing valid from February 1 to May 31, 2018 PRECISION MILLING MACHINE VISES Vises are Matched An integral key and large fasteners reduce deflection by 50% 4 jaw plate positions
More information155 CARTRIDGE SINGLE SEAL
MECHANICAL SEAL INSTALLATION INSTRUCTIONS 155 CARTRIDGE SINGLE SEAL SEAL INSTALLATION Preparation Determine if the pump is in good condition. A. Check the shaft or sleeve. 1. Remove all burrs and sharp
More informationTable of Contents. To place an order, please contact: Keith Clendenin; cell ph. (860)
Rev. Date 5/10/2016 Table of Contents Standard Products...3 Back Working Drill Holders...4 Bar Feed Brackets...5 Reducer Bushings...6 Chucker Kits...8 Coolant/Air Blast Manifolds...9 Thru-Coolant ER Collet
More informationBORING SYSTEMS INFO. 3 nd edition
BORING SYSTEMS INFO 3 nd edition April 25 TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY TECHNOOGY FOR HIGH PRECISION Ingersoll
More informationDial and Electronic. Indicators Gauges
Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range
More informationClamping Nuts. Sealing Disks Coolant Flush Disks. Clamping Nuts. Sealing Disks (DS) Coolant Flush Disks (KS)
Clamping Nuts Sealing Disks Coolant Flush Disks Clamping Nuts.01 Features and Benefits.02 Assembly Instructions.0 Hi-Q/ER Standard Nuts.06 Hi-Q/ERC Standard Coolant Nuts for DS and KS Disks.08 Hi-Q/ERC
More informationSERIES 36-AM & BD...4-5 SERIES 36-AM-RA & BD RA...6-7 SERIES 50-AM & BD...8-9 SERIES 36 TOOL CHANGER...10-11 SERIES 50-TOOL CHANGER...12-13 SERVO MOTOR ADAPTERS...14-15...16-17...18-19 COLLET NUT...19
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationCAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG
powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders
More informationDETa-1 Collet Holder DTA. DTE Fully applicable. DTB For high-speed cutting, High cost performance. 2mm collapsibility with just one collet!!
HSK-T ing Systems or Turning Mill M/ ETa-1 OET HOER AGE HEA General Purpose ETa-1 ollet Holder Pull collet type OET HOER 2mm collapsibility with just one collet!! Just 6 collets is all it takes to chuck
More informationKeyed Industrial Chucks Keyless Industrial Chucks Rubber-Flex Collet Chucks Arbors
Keyed Industrial Chucks... 1244 Keyless Industrial Chucks... 1248 Rubber-Flex Collet Chucks... 1250 Arbors... 1252 Sleeves, Sockets & Ejecting Drifts... 1255 Portable Tool Chucks... 1256 Special Purpose
More informationACE LOCK Milling Chucks
ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More informationCOMPANY INTRODUCTION
COMPANY INTRODUCTION Uncompromising Quality Utilizing State-of-the-Art Facilities and Equipment DMG-MORI Multitasking CNC Machines The work piece is completed in a single set-up. Assures the best qualities
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE 2017 12 LM52 Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). The Climax LM5200 Milling
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
LIVE 77 Includes Tools 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Lathe Tooling
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationHeimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12
1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested
More informationSERIES M SERIES. High Rigidity Vertical Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Vertical Machining Center
M SERIES Vertical Machining enter EXELLENT TRUSTWORTHY ON AND ON YIH HUAN MAHINERY INDUSTRY O., LTD 407 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +88-4-239-331 FAX : +88-4-239-00 Web
More informationBT Shank Tools BT30...E2 E18 BT40...E20 E60 BT50...E62 E95.
BT Shank Tools BT30.................................................................................E2 E18 BT40................................................................................E20 E60 BT50................................................................................E62
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationJuly 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationGEN2 T-A Drill Inserts
RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts Series iameter Range: 12.98mm - 17.65mm (.511 -.695 ) RILLING T1 1 132 HSS Inserts - Super obalt arbide Inserts - K2 (2) K35 (1) Insert
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationAccuTru Thermowells. Dedicated to those organizations that value improved temperature measurement for critical processes
S E N S O R T E C H N O L O G I E S AccuTru Thermowells Dedicated to those organizations that value improved temperature measurement for critical processes Section 5 Index Thermowells Model Page PT-1
More informationLATHE TOOLHOLDER BUSHINGS
HUK JWS LTH WORKHOLING MHIN VISS VIS JWS RTNTION KNOS R,, TG OLLTS TOOLHOLRS TP HOLRS INXL RILLS TURNING & ORING NMILLS, RILLS TPS & RMRS RSIVS MSURING TOOLS MRO & STY LT STOK/RILL RO LTH TOOLHOLR USHINGS
More informationFeatures. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationFeatures Benefits. Toolholders. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and part number.
Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 00/ISO 400. Marking Type and part number. Traceability Lot number marking on all products for traceability through the
More informationSize 9.4 Mesur-Fil Fluid Couplings P WC-97
Size 9.4 Mesur-Fil Fluid Couplings P-1033-1 WC-97 Installation Instructions Size 9.4 Fluid Couplings Models HC, HCF, HCM, HBM 22 21 HCF Input (see page 5) 13 Input Side Optional Output Side Standard 13
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationSanders, Buffers & Polishers Introduction
Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc
More informationInstallation Instructions
Installation Instructions BW Seals Q, QB Series General Service Balanced Pusher Seal Q, QB, QBQ, QBS, QBU, QBQ LZ Experience In Motion 1 Equipment Check 1.1 Follow plant safety regulations: lock out motor
More informationSize 7.0 Mesur-Fil Fluid Couplings P-1033 WC-96
Size 7.0 Mesur-Fil Fluid Couplings P-1033 WC-96 Installation Instructions Size 7.0 Fluid Couplings Models HC, HCF, HCM, HBM 7 22 21 HCF Input (see page 5) Optional 13 Input Side Output Side Standard 13
More informationSIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO.
Drills Screw Machine Length Drills High Speed Steel 118 Point General Purpose Bright Finish or TiN Coated Developed primarily for use in screw machines, these short length drills provide maximum rigidity
More informationABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.
+ Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator
More informationI.T ODT-N * series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION ISSUED
series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION I.T. 6482 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 06-09
More informationInstallation Instructions
Installation Instructions X-100 Single cartridge mounted welded metal bellows seal Experience In Motion Congratulations You have just purchased a reliable, long-life product manufactured by the leading
More informationE3000 SERIES CONTROL UNIT
ispeed E E BRUSHLESS MOTOR & SPINDLE SERIES Modular Type (ø mm),~, min- (rpm) Maximum Output W Motor speed is displayed accurately on the front panel. Auto or Manual Control Modes. Can be installed on
More informationBMT 65 TOOLING BENZTOOLING.COM
BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s
More informationWORKHOLDING. Collet Blocks TURNING MILLING GRINDING WORKHOLDING ROTARY.
WORKHOLDING ollet Blocks TURNING MILLING GRINDING WORKHOLDING ROTRY www.hardinge.com Part Setup Reduction Hardinge has several options for holding single or multiple parts on your machine table, in trunnions
More informationExtremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191
More information