E2530 SERIES E2550 SERIES E3000 SERIES E3200 SERIES E4000 SERIES 5 AIR LINE KIT 7 TECHNICAL DATA 8 APPLICATION EXAMPLES

Transcription

1

2 ispeed E0 SERIES,000~0,000 min - (rpm) Output W Outside Diameter (ø. mm) The E0 Series is capable of up to 0,000 min - (rpm) and employs a high-speed, ultra-quiet brushless motor. High-performance system and state of the art design allows high-speed machining and a variety of safety functions. E0 Series E0 E0 E00 E000 E0 SERIES,000~0,000 min - (rpm) Output W Outside Diameter,, (ø., ø, ø. mm) The E0 Series is capable of up to 0,000 min - (rpm) and employs a high-speed, ultra-quiet brushless motor. High-performance system and state of the art design allows high-speed machining and a variety of safety functions. E0 Series ø0." HES0 HES0 SERIES,000~0,000 min - (rpm) Output 0W Outside Diameter One Piece Type :,, (ø0, ø, ø0 mm) Modular Type :,,, (ø., ø, ø., ø0 mm) Series E00 SERIES,000~0,000 min - (rpm) Output 0W Outside Diameter Modular Type : (ø0 mm) Modular Type (Air Bearing) : ø.9" (ø0 mm) E00 Series E000 SERIES,000~0,000 min - (rpm) Max. Output,00W Outside Diameter ø."(ø0 mm) Up to ø0." Collet Capacity Designed for use on CNC Lathes, Robots and Special Application Machines for precision milling, drilling grinding, slitting and deburring applications E000 Series -p0 AMERICAN ROTARY TOOLS CO.

3 HIGH POWER SOLUTIONS E000 Series Electric System Outside Diameter ø."(ø0 mm),000~0,000 min - (rpm) Max. Output,00W One Piece Type Up to ø0." Collet Capacity Designed for use on CNC Lathes, Robots and Special Application Machines for precision milling, drilling grinding, slitting and deburring applications ispeed E0 E0 E00 E000 ø0." HES0 HES0 AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) - -p9

4 BRUSHLESS MOTOR SPINDLE High Speed, Power and Torque in a Brushless DC Motor/Spindle,000 ~ 0,000 min- (rpm) with,00 Watts (. HP) of Power 0 mm (. Dia.) Body Diameter." Collet Capacity E000 Series System Chart E000 SERIES ispeed E0 E0 E00 E000 ø0." HES0 HES0 Chuck Nut CHN- Collet Chuck CH Group Brushless Motor Spindle B-00 / B-00 Features of E000 Series,000~0,000 min - (rpm), 00 min - (rpm) (for centering rotation) Rated output 00W (Max. output,00w) Spindle accuracy μm or less. Achieved continuous run of over,000 hours. {NAKANISHI's factory test without load at 0,000 min - (rpm)} Motor weight lb..9 oz. (B-00, B-00) lb.. oz. (B-00RA, B-00RA) Proper coolant air pressure PSI Coolant air consumption.cfm Extremely low vibration brushless DC motor. Utilizes a double pair of ultra-precision ceramic bearings to obtain high rigidity in both radial and thrust directions. Incorporates ceramic bearings on the front side and on the rear side. External housing made of precision ground stainless steel SUS-. Automatic Control System Chart Single Motor Spindle Operation Motor Spindle Motor Cord Air Brushless Motor Spindle B-00RA / B-00RA NE Control Unit Control Unit NE E000 Series Combination Example Air ON/OFF R/L Compressor Sequence 00V Torque Characteristics B-00 / B-00RA Torque (cn. m) Torque (cn. m) Air Line Kit AL-00 Cooled-air is supplied. (PSI) Torque Continuous Duty Area Output Speed { x 0 min-(rpm) } B-00 / B-00RA Torque Output Continuous Duty Area Speed { x 0 min-(rpm) } Compressor E000, B-00 Combination Example Product NE Control Unit,.00 9 B-00 Motor Spindle, AL00 EMCD-000-M EMCD-000S-M AL-00 Motor Power Cable Motor Signal Cable Air Line Kit Output (W) Output (W) 0,000 min - (rpm) Total,.00 -p9 AMERICAN ROTARY TOOLS CO.

5 E000 SERIES CONTROL UNIT AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) - CAT. No. High-Performance Electric Circuit High grade feedback loop to maintain constant spindle speed even if load is varied, and Gentle start/quick stop functions are provided. Warning/Error Function Motor Spindle is stopped safely and quickly, Warning/Error LED is lit, Warning/Error Signal is output to external device when a problem or tool breakage is detected. Warning : Air shortage Overload operation Motor Sensor Error Control Unit Overheat Error CONTROL UNIT NE 0,000 min - (rpm) : Internal Circuit Error Voltage/Currency Error Overheat/Overload operation Operation Error Air shortage E000 Optional Safety Relay Box The Safety Relay Box is for use with the E000 Control Unit. The Safety Relay A contacts switch the Motor Power Line and B contacts switch the external outputs to the machining center s CNC controller. The Safety Relay utilizes Normally Open contacts. The Emergency Stop Signal lines must be supplied with power to hold the Safety Relay contacts closed and allow the E000 Control Unit to supply power to the motor. Any system errors, trouble with the machining center or the connections between the E000 Control Unit and the machining center's controller will cause the relay contacts to open and the E000 motor to stop. The Emergency Stop Signal Input can be connected to any and all portions of the machine s safety systems (E-Stop String) to stop the E000 motor any time that stoppage of the spindle and motor is required. The B contact outputs can be used to detect an open circuit on the motor line and integrated with the machines safety systems to stop the machine in case a problem occurs. Maximum RPM Setting by Parameter Capable of setting the maximum motor speed for the allowable motor speed by the Parameter Setting External Input-Output Connector (Refer to Technical Data -p~p in detail) Input Signal Examples : Start / Stop, Forward / Reverse, Pulse Speed Increase / Decrease, Speed Control, Error Code Release. Output Signal Examples : Error / Warning, At-Speed, RPM Monitoring, Torque Monitoring, Rotating Signal. Motor Speed Display Motor speed is displayed precisely and digitally. Operation Panel Extension Cord meter ( ft.) is available LOAD [] Load Meter [] Running LED (RUN) : Continuous load area [] Warning LED (WARNING) : Intermittent load area [] Error LED (ERROR) : Overload [] Error Reset Switch (RESET) [] Gear Setting Switch (GEAR) [] Control Switch (AUTO/NUAL) [] Rotating Direction Selector Switch (FWD./REV.) [9] Start Switch (START) [0] Motor Speed Adjustment Switch (SPEED) [] Display E000 Control Unit Plug Type Standard Equipment Accessories [] [] [0] [] [] [] [] [] Specifications : NE Power Source : AC00V Motor Speed :,000-0,000 min - (rpm) Max. Output Power :,00W Power Consumption :.A Air Flow Volume :.FM (PSI) Weight : lb.. oz. Dimensions : W9." x D." x H.9" [] [] : Load Meter [9] ispeed E0 E0 E00 E000 ø0." HES0 HES0 00V NE Power Cord : ft Air Hose with filter : ft Connector Cap (Provided) Connector Cover (Provided) Bracket : pcs. Rubber Pad,.00 Please refer to Technical Data -p~p in detail about External Input-Output Connector. Order by catalog number. -p9

6 E000 SERIES BRUSHLESS MOTOR SPINDLE COOLANT E000 Series can be used in conjunction with water or oil based coolants. BRUSHLESS MOTOR SPINDLE B SERIES 0,000 0,000 min - (rpm) (.0") Max. Tool Mounting Depth (.") Max. Tool Mounting Depth (.")." (0.") STRAIGHT TYPE B-00 B-00 ø mm (ø.") ø0.9" ispeed E0."." Recommended Clamping Area ' Quick Disconnect Cord E0 E00 E ANGLE TYPE (RA) B-00RA B-00RA ø mm (ø.") (.0") Max. Tool Mounting Depth (.") Max. Tool Mounting Depth (.").0"."." Recommended Clamping Area : When the tool shank diameter is between.9mm and 0mm : When the tool shank diameter is less than.9mm ' Quick Disconnect Cord ø0." HES0 HES0 Proper Air Pressure... PSI Air Consumption....CFM Min. Bending Cord Radius... R0 mm < Optional > Collet (CH-[][])... ø.0 mm~ø.0 mm (See Page -p for details) Motor Power Cable... Motor Signal Cable... ø0.9" Air Hose... ømm 0,000 min - (rpm) 9 9 0,000 min - (rpm) 9 90 B-00 B-00RA B-00 B-00RA Shape Straight 90 Angle Shape Straight 90 Angle Max. Torque 0. N m Max. Torque.0 N m Spindle Accuracy Within μm Spindle Accuracy Within μm Standard Equipment Accessories Note : Motor Cable is sold separately. Max. Output,00W Max. Output,00W Rated Output Weight Cord Length 00W lb.9 oz. ft lb. oz. ft Rated Output Weight Cord Length lb.9 oz. ft 00W lb. oz. ft,9.00,0.00 w/o Motor Cable,9.00,.00 w/o Motor Cable Collet ø/" (CH-.) : pc. Collet Nut (CHN-) Wrench ( x ), ( x ) : pc. each -p9 AMERICAN ROTARY TOOLS CO.

7 E000 SERIES & MOTOR CABLE CAT. No. AL00."." PF/.0"."."." AL " 0.9"." 0.9" Air Line Kit (For ø mm Hose Filter Mesh 0. μm) Standard Equipment Accessories AL00 MOTOR POWER CABLE with Air Hose Product Connector Diameter : Length 9 EMCD-000-M 9 9 MOTOR SIGNAL CABLE Product Connector Diameter : ø0.9" Please purchase both the Motor Power Cable and the Motor Signal Cable EMCD-000-M EMCD-000-M The AL-00 is a Clean air supply unit for E000 Series control unit. Dust in the compressed air is eliminated by the filter in the first stage and the regulator provides accurate and stable air to the control unit. ft (.0m) 0 ft (.0m) ft (.0m) AL-00 Air Filter Air Regulator Air Pressure Gauge Air ON-OFF Valve Hose for Piping (K-) : ft Std. Accessories 0.00 ft 9 EMCD-000-M 0.00 (.0m) Length 9 EMCD-000S-M EMCD-000S-M EMCD-000S-M ft (.0m) 0 ft (.0m) ft (.0m) Air Hose Std. Accessories B-00 B-00 B-00RA B-00RA B-00 B Not for use with the 90-Degree Angle Motor (RA) ft 9 EMCD-000S-M 0.00 (.0m) B-00 B-00 B-00RA B-00RA B-00 B Not for use with the 90-Degree Angle Motor (RA) ispeed E0 E0 E00 E000 ø0." HES0 HES0 AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) - Order by catalog number. -p9

8 E000 SERIES SAFETY RELAY BOX ispeed E0 SAFETY RELAY BOX CAT. No. Mounts directly on E000 Control Unit. Allows Emergency Stop Signal from the CNC to stop the E000 Motor Spindle or the E000 Control Unit to stop the machine operation. Example of using an E000 control unit with the Safety Relay Box 9 E0 E00 E000 Safety Relay Box E000- SRB Standard Equipment Accessories Relay Cord (Motor Power Line) Emergency Stop Cord.00 Please contact NSK America for specification and pricing ø0." HES0 Operation Panel Extension Cord / Box For Control Panel E000- PEX Product Description / Specifications Operation Panel Extension Cord (m) E000 Control Unit 0.00 HES0 E000- PB Box For Control Panel Case A Case B Blind Plate Screw (M) : pcs. Screw (M) : pcs. E000 Control Unit.00 AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 0 WEST DUARTE ROAD, #E MONROVIA, CA USA 90- Tel: () - Fax: () -00 Toll Free USA Tel: (00) - Fax: (00) -0 info@artcotools.com -p9 Order by catalog number.

9 AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) - CH Group d." : K- : CHN-0 CH Group d.9" ABS-00 PLANET 0 BANTAM 0 A-0R A-0L A-00 A-0R A-0L A-0R A-0L TN- NR-0 FG-0S PL PL PL PL PL PL9 PL0 9 9 PL9 PL9 9 PL9 99 PL9 9 PL PL0 9 PL0 PL00 99 PL90 9 PL 9 9 PL0 PL0 PL0 PL PL0 9 9 PL0 PL09 PL PL PL0 PL0 CH-0. CH-0. CH-0. CH-0. CH-0. CH-0. CH-0.9 CH-.0 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-.0 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-.0 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-.0 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-.0 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-.0 CH-. Inside Diameter d ø0. ø0. ø0. ø0. ø0. ø0. ø0.9 ø.0 ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø.0 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø.0 ø. ø/" ø. ø. ø. ø. ø. ø. ø. ø.9 ø.0 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø.0 ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø.0 ø/" CH Group d PL PL0 PL PL PL PL PL PL PL PL9 909 PL 90 PL 90 PL PL PL PL 90 PL 909 PL PL0 ø0." CH0- ø0.0" PL0." 0." CH-.0 CH-. CH-0. CH-0.9 CH-.0 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-.0 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-.0 CH-. CH Group d " CH-.0 CH-. CH-.0 CH-.0 CH-. CH-.0 CH0- Inside Diameter d ø.0 ø/".00 RA-00 RA-E RA- RA-H Inside Diameter d ø0. ø0.9 ø.0 ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø.0 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø.0 ø/" PLANET 000 Inside Diameter d ø/" B-00 B-00RA B-00 B-00RA Inside Diameter d ø.0 ø/" ø.0 ø.0 ø/" ø ispeed E0 E0 E00 E000 ø0." HES0 HES0 indicates Hand Grinder use indicates Machine Spindle use Order by catalog number. -p

10 < > GRIP RING AMERICAN ROTARY TOOLS CO. GRIP RING The Grip Ring is an adjustable position split type flange for 0mm and 0mm spindles. The Grip Ring can easily mounted or removed from any CNC machine or specialty machine tool block or tool post. Eliminates the chance of over tightening and damaging the spindle in the sleeve during installation. ispeed E0 E0 Caution Do not remove the Lock Bolt. If the Lock Bolt is removed, the Washer inside may move. Once the Washer is moved, it may make it impossible to attach the Lock Bolt. Do not remove the spindle while the Grip Ring is attached to the machines' holder. This may cause deformation and / or damage to the Grip Ring. CAT. No. GRIP RING GR-0 E00 E000 Washer Lock Bolt (M) X Screw hole for removal (M) ø0." HES0 0 ø." Section X-X GR-0 0 X 0." 0.9" ø0mm () ø." Standard Equipment Accessories Mounting Bolt (Accessories) (MxL) Mounting Bolt (Mx) : pcs..00 HES0 CAT. No. GRIP RING GR-0 Washer Lock Bolt (M) X Screw hole for removal (M) (.") ø." (.") Section X-X X 0.".0" ø0mm (ø.") ø." Standard Equipment Accessories Mounting Bolt (Accessories) (Mx0L) GR-0 Mounting Bolt (Mx0) : pcs p