FR 9001 Aluminum Sliding System
|
|
- Roger Scott
- 5 years ago
- Views:
Transcription
1 R 9001 luminum Sliding System
2 R 9001 SLID TYP: MOUNTING: Modular luminum Sliding System ottom Mount or Side Mount 50 WIDTH: 58 mm (2.28 in.) LOD PITY: dynamic up to 225 kg (500 lbs.) MTRILS: UTION: arrier Rear of cabinet Rear of slide aluminum slide 4 rollers set color must match on each side Rear of cabinet Rear of slide SID VIW SID VIW Tray ottom (not supplied) 5 5 ront of slide 2 mm TURS: ront of cabinet ront of slide 2 mm arrier ront of cabinet arrier 68 4 order number 9200 roller set, consisting of: 2 pieces solid rollers (tolerance compensating), (red), Metric mm2 pieces ball bearing rollers, (white), 4 pieces stops, 16 pieces xtension xtension M6x20 mm bolts (DIN984), 24 pieces M6 square nuts (DIN55) Inches Rear of 96 cabinet 0 xtension Rear of 6.2 slide Metric mm xtension n m M6 squ Sold by 800 the foot, feet maximum n Description mm 186 feet Required 291 omponents Optional omponents Weight Order No. Profile xtrusion feet Profile xtrusion * PPLITION DVNTGS: nylon rollers and nylon-encased ball bearings xtension 4 3 components = 1 system a commonly shared extruded profile with a special interior shape in combination with roller carriers and stops offering a wide variety of applications. SPIITIONS: 4 modular Sliding System comprised of 3 aluminum components for a wide variety of applications lbs. weight capacity for a 4 ft. long pull-out Regular xtension is approximately 0% of the NOTS: 68 length of the profile 4 the special interior shape of the profile compensates for installation inaccuracies in width, height and angular direction 4 the extruded profile is available up to 6400 mm (21 ft.) 4 simple and secure fastening of the profiles by means of the T-slots and M6 bolts 4 simple and secure fastening of the roller carriers and stops with M6 bolts 4 a recess for a M6 (DIN984) llen head bolt with a centerline groove to accurately mark the position of the holes 4 only one version of stops Scale 1mm place at 50 4 roller carrier equipped with two types of rollers: solid high-impact plastic roller with lateral play to overcome dimensional installation inaccuracies (red) and ball bearing roller with high-impact plastic (white) 4 the system R 9001 allows the fabricator to create any size pull-out from individual components it (see NOTS) it * 9200 W HRT Inches xtension Profile xtrusion feet Profile xtrusion (Mounting or drawer construction components) * Profile xtrusion feet Profile xtrusion (Mounting or drawer construction components) * *on request 1
3 R 9001 SLID TYP: MOUNTING: Modular luminum Sliding System ottom Mount or Side Mount WIDTH: 58 mm (2.28 in.) LOD PITY: dynamic up to 225 kg (500 lbs.) xample R9001 Regular xtension: 2 outer profiles with 4 stops and 2 roller carriers 2 inner profiles with 2 roller carriers ll profiles have the same length, extension to one side carrier red carrier red Stationary Profile carrier white Movable Profile 1. asten stop with M6 x 20 mm bolts (DIN984) 2. Slide in roller carriers and fasten with M6 x 20 mm bolts (DIN984) 3. Slide in movable profile from the back forward 16x 24x 4. asten stop with M6 x 20 mm bolts (DIN984) Profile : Required xtrusion 32 (1.25) it: Required 2 pcs. ballbearing rollers, (white) 2 pcs. solid rollers (tolerance compensating), (red) 4 pcs. stops 16 pcs. M6 x 20 mm bolts (DIN984) 24 pcs. M6 square nuts (DIN55) Drill Ø6.5 mm (.26") holes thru Movable Profile RONT Profile xtrusion: Optional (Mounting or drawer construction components) Min. 30% of Stationary Profile RONT (.25) Drill Ø6.5 mm (.26") holes thru mm (in.) (.551) TOP VIW Left side shown (right side mirror image) Profile xtrusion: Optional (Mounting or drawer construction components)
4 R 9001 SLID TYP: MOUNTING: Modular luminum Sliding System ottom Mount or Side Mount WIDTH: 58 mm (2.28 in.) LOD PITY: dynamic up to 225 kg (500 lbs.) Tilt-down application with custom made brackets Horizontal pplication underneath tray Vertical pplication Profile Milling onfiguration for corner connection Profile TOP VIW Profile Pr ofile Profile can also used as a bracket for surface mounting arrier Profile Profile RONT VIW Profile xample R9001 Regular xtension: 42 outer profiles with 4 stops and 2 roller carriers 42 inner profiles with 2 roller carriers 4all profiles have the same length, extension to one side xample R9001 Regular xtension: 42 outer profiles with 4 stops 42 inner profiles with 4 roller carriers 4different lengths of profiles, extension to both sides xample R9001 Table xtension: 42 outer profiles with 6 stops 4table top with roller carriers arranged in pairs 3
5 R 9001 Lock & PRODUT TYP: Lock & System for R 9001 G shown closed D shown open D G MTRILS: aluminum and steel TURS: lock & stock system for use with R 9001 aluminum slide system SPIITIONS: 4 order number 92018: profile D extrusion, 6400 mm (21 feet) sold by foot or profile D extrusion I 25.4mm (1 inch) D G H 4 order number 92021: rod, steel, 6 mm diameter x 2000 mm (8 in.) long sold by piece 4 order number 9202: Lock and Set, consisting of: Rod Guide D Spring G 1 piece Lock lever (), 1 piece Release lever (), 1 Lever Rod piece Rod guide (), 2 pieces Ramp (), 1 piece Spring (G), 4 pieces Set screws M5 x 6 mm (H), 3 pieces olt Position of Spring RONT VIW SID VIW L Profile I J I X J.5 I G 25.4 H (optional position) Profile Profile Side View ront View Inches xtension X Metric mm xtension X Description Note Weight Order No. kg. lbs. Lock & ( see specifications) * 9202 Profile D xtrusion, 25.4 mm (1 inch) sold by the piece * Profile D xtrusion, 6400 mm (21 feet) sold by the foot * 92018** Rod, 6 mm diameter x 200 mm (8 in.) long sold by the piece * R 9001 orner racket Description 25 (1) 90 (3.54) 90 (3.54) mm (in.) Universal orner racket shown with profile **non stocking item, inquire for lead time Universal orner racket shown with profile,,and Universal corner racket, aluminum Packing Unit: 1 piece Order No. 4
6 R9001 luminum Sliding System (4 T-Slots) set consists of (see illustration on page 2): 2 pieces Solid s (red), tolerance compensating 2 pieces allbearing s (white) 4 pieces s 16 pieces M6x20mm Socket Head olts The roller carriers are marked with: for ront for ack Mounting Recommendations R9001 (4 T-Slots) or the R9001 (4 T-Slots) profile this has to be reversed because the profile is a symmetric shape. This means that on the stationary profile the roller and carrier are mounted on the front and on the movable profile the roller and carrier are mounted on the back. In order to check if it is correct you must notice a slight incline of the movable profile from back to front. This compensates for the deflection under load. Please note that in each set are white and red rollers. You must use the same color roller on each side. Never use a white and red roller on the same side. ollow the included instructions to drill all holes for roller carriers and stops. 32 (1.25) Drill Ø6.5mm (.26") holes thru Movable Profile RONT Min. 30% of Stationary Profile RONT (.25) Drill Ø6.5mm (.26") holes thru mm (in.) (.551) TOP VIW Left side shown (right side mirror image) 5
7 ... only a few exemplary versions shown. In the automotive industry and specialty vehicle industry adding weight is of the greatest concern. With the R 9001 luminum Sliding System, big loads can be moved with little effort, yet the sliding system is light weight. The R 9001 has its place where simple application, light weight and resistance to corrosion is an issue. ut at the same time high load capacity and dependability are of greatest importance. Printed in the U.S.. /20 R another ulterer product for specialists and experts. ULTRR US IN. 542 Townsend venue High Point, N , US T T info@fultererusa.com ULTRR US IN Proforma venue, Unit -2 Ontario, 9161, US T info@fultererusa.com
SMT. Standard Mounting Tab system ball bearing. system FR 5400.SMT FR 5400L.SMT FR 5609.SMT & FR 5609.OT.SMT FR 5609.ECD.SMT
SMT system system ball bearing FR 5400.SMT FR 5400L.SMT FR 5609.SMT & FR 5609.OT.SMT FR 5609.D.SMT Fulterer Slides, ball bearing common mounting system for an extraordinary family of slides. FR 5000.SMT
More informationSection 6 Feet & Casters
atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30
More informationComplete Workstations
Complete Workstations Modular designed workstations by offer a wide range of options and accessory combinations. All structural profiles used in our workstations are made of high strength aluminum, combined
More informationTelescopic slides 603
603 Technical information for telescopic slides Construction: consist of two or more ball-bearing supported guide rails mounted one inside another that can be pulled out like a telescope. The load rating
More informationPULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
More informationUS FUTABA ESTABLISHED 1983 NEW IN THIS SECTION OFFICE LINE. Short Type 4 5-1/8" ( mm) 23.5 Ø /4" 45 mm. 1-3/16" 30 mm 5/8" 15.
0 5 1-3/4" 1-3/16" 30 5/8" 15.8 15 ESTABLISHED 1983 31/64" 1 Ø 100 Ø + 1/" 1" 1/8" NEW IN THIS SECTION " Short Type 4 5-1/8" (100 130 ) Ø =, & 80 11 13 0 Ø 6 Extra Heavy Duty Adjustable Floor Leveler (Page
More informationSliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings
Ultra 20 Swing Door fitting, door weight up to 20 kg Area of application: Door swings out to the front and to the side when being opened, allowing unlimited access to the cabinet interior, can be used
More informationThe specialist for fastening technology. Post holders NEW. to our product range
Post holders H post anchors H post anchors Fork width Dimensions a) Drill holes b) Art. no. (mm) Overall/Post support (mm) Post support (mm) PU 904722 91 600 x 60 / 300 4 x 11 904723 101 600 x 60 / 300
More informationINNOVATIONS IN KITCHEN CABINET STORAGE
INNOVATIONS IN KITCHEN CABINET STORAGE Striving for perfection and harmony Perfection, as we understand it, does not serve only to demonstrate our technical abilities. We believe we have approached perfection
More informationHepcoMotion. HTS telescopic ball bearing slides
HepcoMotion HTS telescopic ball bearing slides ontents Introducing the HepcoMotion HTS eature and enefits 1 ONSTRUTION 2 XPLNTION O TRMS Load Rating 2 Load Rating and uty ycle 2 Safety 2 Travel (xtension)
More informationCam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationINNOVATIONS IN KITCHEN CABINET STORAGE
INNOVATIONS IN KITCHEN CABINET STORAGE 1 Striving for perfection and harmony Perfection, as we understand it, does not serve only to demonstrate our technical abilities. We believe we have approached perfection
More informationBAVONA TP6500 HARDTOP
VON HRTOP eschreibung escription min. 200 cm max. 600 cm 0 min. 200 cm max. 600 cm Terrace pavilions comprising a continuous cubic frame (extruded aluminium profile dimension 230 x mm) and a lamella canopy.
More informationDesk-top cases b. Flexible expansion options, for 19" components e.g. plug-in unit units, or for individual expansion
Overview... 0 Cainets... 1 Desk-top cases Wall mounted cases... 2 Accessories for cainets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 02004009 Suracks/ 19" chassis... 6 Front panels,
More informationConnecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
More informationBAVONA TP6100 SOFTTOP
VON SOFTTOP escription min. 200 cm max. 500 cm 0 min. 200 cm max. 600 cm Terrace pavilion consisting of a surrounding cubic frame profile (aluminium extruded profile dimension 230 x mm) and a folding awning
More informationHighest Precision: SPL Series
Highest Precision: SPL Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the SPL Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
More informationHanging Cabinets & Accessories
.0 Hanging Cabinets & Accessories.1 Blum AVENTOS HK-Stay lift for wooden fronts or wide alu frames Material: Steel mechanism, plastic cover caps Finish: Mechanism galvanized, cover cap grey Adjustment:
More informationCLASSIFICATION OF ROLLING-ELEMENT BEARINGS
CLASSIFICATION OF ROLLING-ELEMENT BEARINGS Ball bearings can operate at higher speed in comparison to roller bearings because they have lower friction. In particular, the balls have less viscous resistance
More informationRIG-I-FLEX 140 SERIES CURTAIN TRACKS
RIG-I-FLEX 140 SERIES CURTAIN TRACKS Parts Included 140 RIG-I-FLEX CWANA code CORD OPERATED/MOTORIZED WALK-ALONG 140 (240) 140-R (240-R) 141 (241) 141-R (241-R) 142 (242) 142-R (242-R) STRAIGHT CURVED
More informationBolt on handle and mounting kit included in price. Bolt on handle and mounting kit included in price.
Extruded Plain Extruded aluminum provides strength, yet weighs less than other models with the same solid construction and protection. Extruded plain model is a great economical cab protector, while still
More informationThe Tracking Magnet Recessed High-tech LED lighting system for interior architecture
Description The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent
More informationBosch Seat Motor _spec_sheet_-_Bosch_FRC_motor_6_004_.pdf. FRC_Bosch_motor_V2_6_004_RA3_ zip
Bosch Seat Motor Specification Sheet 2016-12-21_spec_sheet_-_Bosch_FRC_motor_6_004_.pdf CAD File FRC_Bosch_motor_V2_6_004_RA3_194-06.zip Motor Mounting & Shaft Support: Suggested Motor relies on two solid
More informationORIGA SYSTEM PLUS Guides, Brakes and Valves for Modular Linear Drive Systems OSP Appendix to the Operating Instructions
ORIGA SYSTEM PLUS Guides, Brakes and Valves for Modular Linear Drive Systems OSP Appendix to the Operating Instructions TAll personnel who have anything to do with the OSP fitted with guides, brakes or
More informationNCN 9.2. Clamping vise with mechanical/mechanical clamping force multiplier NCN MVS-NCN CLAK NCN. Accessories NCN. Spare parts NCN.
lamping vise with mechanical/mechanical clamping force multiplier pag. 9.2. 2 lamping vise V- pag. 9.2. 8 odular vertical system K pag. 9.2. 14 odular parallels/quick change ccessories pag. 9.2. 15 pare
More informationUniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41
Uniline ystem 1 Uniline series Uniline series Uniline series description ig. 1 Uniline is a family of ready-to-install linear actuators. They consist of internal ompact Rail roller sliders and steel-reinforced
More informationEMERALD CUBICLE COLLECTION. Installation Guide
MRL UIL OLLTION Installation Guide Panel to Panel onnector VIW VIO for Panel to Panel onnector: http://www.youtube.com/watch?feature=player_embedded&v=5s4zwoa9u7c#at=43 This onnects 2 Panels Together Side
More informationCam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationSINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS
SINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS SINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS MANET CONTENT MANET CONCEPT Sliding door system 6 21 Pivoting door system 22 35 Connection system 36 43
More informationMODEL mm Hinges Included. MODEL 1432 Hinges Purchased Separately Anti-Rak Cable System Flipper Door Slide Up to 75 lb.
1 pplications: Vertically mounted concealed doors for office/residential storage cabinets, entertainment centers, and armoires. Use model 1332/1432 with unique nti-rak cable system to eliminate door sag
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More informationAccessories. Chapter 16
Accessories Chapter 01 01 Accessories Rods for espagnolette locks Rod ø6 article-no. execution L pack. stock.0 steel nickel plated 00 1 pcs a.0 with plastic covered, brown 00 1 pcs a.5 with plastic covered,
More informationALFRA PRESS - overview
70 ALFRA PRESS 71 ALFRA PRESS - overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 74 Page 78 Control cabinet housing, Control cabinet doors, Mounting panels Control cabinet housing, Control cabinet doors,
More informationSpare part list AutoCUT 500. Pos. No. Article no. Description pc Feed unit complete 1
AutoCUT 500 Article no. Description pc 1 8020901 Feed unit complete 1 2 8020911 Mill unit 1 3 8020921 Steering mechnism complete 1 4 8020861 Coasting rail complete 1 5 8020871 Intake rail complete 1 6
More informationDie changing technique
Die changing Die changing 8 Contents Product group 8 Roller bar, hydraulically lifted for heavy loads (400 bar), lifting of the complete roller bar for medium loads (120 bar), lifting of individual rollers
More informationLINEAR MOTION SYSTEM COMPONENTS
R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEM COMPONENTS LINEAR MOTION SYSTEM COMPONENTS PIC Design has added a most comprehensive selection of precision components for linear motion applications.
More information441 SERIES POWER ADJUSTABLE DOOR CLOSERS
441 SRIS POWR JUSTL OOR LOSRS Non-handed djustable power range 1 to 6 Universal retrofit hole spacing actory preset to size 3 Power adjustable arm bracket Tri-pack for regular, parallel arm and top jamb
More informationDynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
More informationBX Honda CR-V Installation Instructions
Attachment Tab Height: 15.5 Attachment Tab Width: 24 Serial Number Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and accessories
More informationSliding Door Fittings, Roller Shutters
Sliding Door Fittings, Roller Shutters Contents Sliding Timber Door Fittings Finetta Flatfront Foldfront Mobilus Classic Sliding door system Automatic sliding door system Planomix Planofit Straightening
More informationPRODUCT UPDATE. Product Update Bulletin Title: CASE IH 10 Series Jackshaft Mount update. Models Affected: CASE IH AFX
PRODUT UPDAT Title: A IH 10 eries Jackshaft Mount update Models Affected: A IH AFX 7010-8010 Date: ept 10, 2015 Problem: 1. Jackshaft twists under load causing belt failure. 2. Redekop jackshaft interferes
More informationG W DISCONTINU. SERVICE TOOLS for COMPANIES, INC. HEAVY DUTY TRUCK TRANSMISSIONS AXLES TIMING BLOCKS gwtoolco.com
G & TOOL W SERVING THE GEAR INDUSTRY OVER 45 YEARS COMPANIES, INC. SERVICE TOOLS for HEAVY DUTY TRUCK TRANSMISSIONS AXLES (FULLER T-9824) G-38: INPUT SHAFT BEARING PULLER Countershaft Front Bearings (#81007)
More informationSeries 1 Steel - Straight Sections
- Straight Sections H-1 -Line series able Systems - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding system in this catalog is designed
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationSIDE ADJUST TANDEM ROLLERS
ROLLERS FOR PATIO DOORS SIDE ADJUST Designed for easy installation and trouble-free service, these high quality radial ball bearing-equipped rollers encompass Truth Hardware s unique advantage in that
More informationDIGITUS Network- and Server Cabinet Dynamic Basic Series
15 Year Product Warranty 600 kg loading capacity Modular aluminum frame construction large range of equipment available Abstract DIGITUS 600, 800 mm width 600, 800, 1000 mm depth Features IP20 rating Steel
More informationTable of contents. Small cases:
R Firmengruppe Table of contents Small cases: Small case x-dream 418......................... III 3 Small case Tarex 419............................ III 5 Small case Profi-case 415/416....................
More informationMT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR
MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES
More informationRJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS
RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 SPORT 3.2 KIT. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED VIEW
More informationInstallation Procedures
For the precision ball and roller bearings supplied by MRC Bearings, skill and cleanliness while handling, mounting and dismounting are necessary to ensure satisfactory bearing performance. As precision
More informationEcoFlow Manual roller sections bring everything closer
120 MPS 5.0 EcoFlow linking elements 842 58 281 (201-11) EcoFlow Manual roller sections ring everything closer The manual linkage of workstations with EcoFlow eases worker strain ecause products and workpiece
More informationRS-2 SINGLE ACTION REAR BUMPER WITH TIRE CARRIER INSTALL MANUAL FOR JEEP WRANGLER ALL MODELS.
RS-2 SINGLE ACTION REAR BUMPER WITH TIRE CARRIER INSTALL MANUAL FOR 2007-2016 JEEP WRANGLER ALL MODELS. Rear Bumper Installation Instructions 1) Remove factory rear bumper, (this includes all tow hitch
More informationParting Line Interlocks
144 Innovative old Interlocks Parting ine Interlocks For accurate alignment between mold halves ll machining can be done from the parting line saving set-up time and machining costs Components can be purchased
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free
MOTORBASES Self-Tensioning Motor Mount for Belt Drives without slippage self-adjusting maintenance-free Technology Tensioning Motorbase Type MB for Belt Drives The elastic tensioning motorbase type MB,
More informationLOCKS Cam Locks P Push Locks P Plug Locks P Digital Locks P. 095
OCKS -1 Cam ocks P. 092-094 -2 Digital ocks P. 095-3 Push ocks P. 096-097 -4 Aluminium Frame & Drawer ocks P. 098-101 -5 Plug ocks P. 102-103 -6 Glass ocks P. 104-109 -1 Cam ocks Cam ock 16 * mm drilling
More informationSpecialty Chair Platform, Base
Specialty Chair Platform, Base Base Actuator Non-Rotational Base Column Top Components Scissors Components Rotational Base Base Shrouds Fuses Base Covers & Electrical Components Rotational Base, Base Shrouds
More informationCabinet. Drawer. 19.1mm (0.75") 53.0(2.09) SLIDE TRAVEL ±4 SLIDE LENGTH ±1. Cabinet. Drawer. 4.6x9.5 Ø4.3 Ø
53.0(2.0) 1.1mm (0.75") 53.0(2.0) 1.1mm (0.75") S TRV ±4 S TRV ±4 S NT ±1 S NT ±1 53 1.1 53 1.1 35 30 10.6 12.6 12.7 10.6 12.6 12.7 12.6 35 12.6 4.6x.5 Ø6.4 4.6x.5 Ø6.4 M N 35 30 35 M N www.kingslide.com
More informationINSTRUCTIONS INSTRUCCIONES CONSIGNES
AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: 2013-UP FORD ESCAPE APP PART # 28-21010, 28-21015 STYLIZED RUNNING BOARD ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 2 RUNNING BOARDS
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationMODEL mm Hinges Included. MODEL 1432 Hinges Purchased Separately Anti-Rak Cable System Flipper Door Slide Up to 75 lb.
MODEL 1332 35 mm Hinges Included MODEL 1432 Hinges Purchased Separately nti-rak System Flipper Slide Up to 75 lb. [34 kg] apacity pplications: Vertically mounted concealed doors for office/residential
More informationMURPHY. Library Bed - Model # BC-2 Hardware. Cabinet Cut List - Assembly Procedure and Sequence. Fits all Single/Twin, Double/Full, Queen Beds
MWBS MURPHY WALLBED SYSTEMS INC. MURPHY Library Bed - Model # BC-2 Hardware Cabinet Cut List - Assembly Procedure and Sequence Fits all Single/Twin, Double/Full, Queen Beds 2010 Murphy WallBed Systems
More informationRekluse Motor Sports. The z-start Clutch LTR 450. Installation Guide Copyright 2002 Rekluse Motor Sports z-start Revision 3.
Rekluse Motor Sports The z-start Clutch LTR 450 Installation Guide Copyright 2002 Rekluse Motor Sports z-start Revision 3.000 RMS166 LTR 450 191-266 Manual Revision: 032306 Rekluse Motor Sports, inc. 110
More informationActuator Products Rodless Cylinders. GDL Series. Material specifications. Specifications OSP-P. Series. Series P1X. Series P1Z.
Catalog PDN1-3US High Performance : (s FDC12HP-... thru FDC45HP-...) The High Performance series is the basis for s development, which is used in the majority of applications. High Performance guides consist
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationFlanges & Fittings. 2.1 Chain Clamp Components & Hardware. 2.2 NW Flanges & Fittings ISO Flanges & Fittings. 2.4 ASA Flanges & Fittings
s & Fittings Section Two. hain lamp omponents & Hardware. NW s & Fittings.3 ISO s & Fittings.4 S s & Fittings.5 F s & Fittings.6 Wire Seal s.7 dapter Fittings.8 Flexible Hoses & ouplings.9 Weld Fittings
More informationCONVEYOR COMPONENTS & ACCESSORIES
STION 28 - ONVYOR OMPONNTS & SSORIS ONVYOR OMPONNTS & SSORIS ipod, Tripod & ross ases... 28-3 Side Guides... 28-9 Joints & Supports... 28-4 onveyor Tube... 28-10 lamps & Rods... 28-5 to 28-8 Mounting rackets...
More informationSection 10 Conveyors and Transport Components
1 Section Conveyors and Transport Components Roller elements, roller profiles, support rollers, and other components are perfect to set up lean manufacturing work cells. These non-powered roller elements
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationSI THREADED INSERTS FOR PLASTICS BULLETIN
SI THRDD INSRTS FOR PLSTIS BULLTIN SI 410 SI THRDD INSRTS FOR PLSTIS SI inserts are typically specified in applications where strong, durable metal threads are required in plastic material, especially
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationSeries 1 Steel - Straight Sections
LST-1 able Systems - Straight Sections How The Service dvisor Works -Line knows that your time is important! That s why the color-coding system in this catalog is designed to help you select products that
More informationChain Breakers Stationary Chain Breaker KT Manual Chain Breakers HK
Chain Breakers Stationary Chain Breaker KT Manual Chain Breakers HK Our know-how your advantage In technical machines and plants roller chains in different lengths come into operation. Roller chains are
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More information600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS
600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS PLEASE READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. A. BI-PARTING TRAVEL 1. Before raising track into position, determine location of
More informationProtection And Separating Wall Systems
1 The protection and separating wall sys tem comprises of a number of different profile families. Standard Profiles ( mm thru 8 mm) From the extensive range of Silverline profiles, most static requirements
More informationProduct Information RiCase
Product Diversity Knowledge Transfer MPS Expertise Globalization Integrative Thinking Product Information RiCase Color Variants RAL 5018 RAL 5012 RAL 7030 Desktop enclosure for the installation of 482.6
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationTS19 AA OVERVIEW. Glazing: Weight: Each panel weighs approximately 7to 8 lbs per sq ft depending on overall panel size.
0 TS9 AA OVERVIEW TECHNICAL INFORMATION The Panda TB Lift and Slide door system is custom made to order and has been designed specifically for use in climates where thermal insulation and U-factor is of
More informationIntegrated Process Solutions
Integrated Process Solutions w w w. m k s i n s t. c o m Series 76 ISO-Universal fittings Sizes to 0 (2½'' to 25'') Series 76 ISO-Universal components are a vacuum flanging system for 63 mm to 1000 mm
More informationMounting Overlap Shield. Face Clamps. Gap. Seat Depth. Lead In Chamfer. Loose Fit.
Mounting Introduction: Reali-Slim thin section ball bearings have a crosssection thickness that is much thinner than standard bearings of the same diameter, and are therefore more sensitive to shaft and
More informationALUMINUM UTILITY TRAILERS
ALUMINUM UTILITY TRAILERS BUILT FOR ADVENTURE. UTILITY TRAILERS page The Triton Difference page AUT Series page 8 AUX Series page 0 TILT Series page ATV Series page ATV-90-TR Series page GU Series page
More informationTension Brakes/Air Cooled
IST. UTORIZO Tension rakes/ir ooled MX (55) 53 63 23 31 Magnum rakes The Wichita Magnum rake sets new standards in performance, safety and serviceability. The Magnum is easy to apply and simple to service.
More informationGrant By-Pass Door Sets with Fascia for Sliding Doors
Grant By-Pass Door Sets with Fascia for Sliding Doors By-passing Door Sets with Fascia Top Line Grant 6065 up to 75 lbs/door (34 kg/door), double track with fascia, for door thickness w (19 mm), side mount,
More informationKitchen and Bath Organization
Ironing Boards...873 874 Pull-Out Table Systems...875 876 Foldaway Systems...877 878 Corner Systems...879 896 Base Cabinet Pull-Out Systems...897 905 Basket Storage Systems...906 910 Pantry Pull-Out Systems...911
More information400 Series Profile Rail Linear Guides
400 Series Profile inear uides Transport grade ball profile rail system www.thomsonlinear.com EECTROMTE Features and enefits The 400 Series Profile inear uide is the newest addition to the Thomson inear
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 916.524.8242 CN: 519.885.5775 Product Diversity
More informationIP65 SEALED DUAL-COMPARTMENT ENCLOSURE
DXXX SERIES IP SEALED DUAL-OMPARTMENT ENLOSURE PRODUT INFORMATION different sizes of wall mounting cases with separate terminal compartment for you to use in measurement & control application. These cases
More informationJdB cassette. Version 1.03 Sun Protection AVZ 3J.1
Version 1.0 Sun Protection AVZ J.1 J.2 Sun Protection AVZ Version 1.0 4211 424-000 Alu wall bracket JdB 95 mm Mill finish 4211 424-006 Idem RAL 9010 pure white 4211 424-755 Idem (* = Textured) RAL 7016
More informationBODY COMPONENTS SECTION H. Fender Backs. Metal Slat. Fender Brackets. Roof Vent. Ramps & Rails. Replacement Dome. Ramp Assist Spring
OY OMPONNTS Metal Slat Roof Vent Fender acks Fender rackets ubs & xles Replacement ome Single xle Fenders Tandem xle, Straight Style Fenders Tandem Fender, Tear rop Style Square end Fenders Triple xle
More informationHSpecialties Inc. TABLE OF CONTENTS
TABLE OF CONTENTS Introduction... Curtain Track Selection Guide...2 Ordering COMPLETE Tracks...3 00 Series Standard-Duty Straight Track...4 200 Series Black Medium-Duty Straight Track...8 300 Series Standard-Duty
More informationSAP E & C ADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (FOR ITI) (PRODUCT CODE: SAP 20B-I)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B-I) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:-
More information2: Ecokit Ecokit 11 Overview A 2_ Ecokit 11 Sub Rack Configuration A 2_ Width A 2_ Height / Depth A 2_6
2: Ecokit 11 2.1 Ecokit 11 Overview 2_3 2.2 Ecokit 11 Sub Rack Configuration 2_5 2.2.1 Width 2_5 2.2.2 Height / Depth 2_6 2.2.3 Handles 2_6 2.2.4 Line Drawing 2_7 2.3 daptation Kits 2_8 2.3.1 daptation
More information2: Stylebox Stylebox 15 Overview B 2_ Complete Stylebox 15 Kits B 2_ Stylebox 15 Standard Kit B 2_8
2.1 Stylebox 15 Overview 2_3 2.1.1 Complete Stylebox 15 Kits 2_7 2.1.2 Stylebox 15 Standard Kit 2_8 2.2 Stylebox 15 Smart 2_10 2.2.1 Width 2_11 2.2.2 Height ezel 2_11 2.2.3 Depth 2_11 2.2.4 Top Cover Panel
More informationFUNCTION OF A BEARING
Bearing FUNCTION OF A BEARING The main function of a rotating shaft is to transmit power from one end of the line to the other. It needs a good support to ensure stability and frictionless rotation. The
More informationROSTA Tensioning Motorbases Type MB. self-adjusting maintenance-free overload-proof non-slip dampen harmful vibrations extend belt drive
83 Technology ROSTA Tensioning Motorbase Type MB for Belt Drives The ROSTA elastic tensioning motorbase type MB, with the rubber suspension unit as swivel mounting, compensates continuously for all stretching,
More informationWell, it's finally on its own 3 wheels. Next up... motor mounts! Attached Images
Well, it's finally on its own 3 wheels. Next up... motor mounts! OK, first step to mounting the motor is to mock it up in position. I am using a Briggs & Stratton Etek motor here (Yes, Briggs & Stratton
More information