Section 10 Conveyors and Transport Components
|
|
- Gerald Adams
- 5 years ago
- Views:
Transcription
1 1 Section Conveyors and Transport Components Roller elements, roller profiles, support rollers, and other components are perfect to set up lean manufacturing work cells. These non-powered roller elements make material transfer within and between work cells easy. Powered Conveyor Brochure Bosch also offers a complete line of modular powered conveyors. Call 1-77-AT-BOSCH for a free brochure. NEW! NEW! NEW! Roller Profile xrp & xrp -2 Roller Profile x50rp & x75rp -3 Guide Profile -4 Roller Elements -5 Support Rollers -6 Track Rollers -7 NEW! Track Roller Mounting Blocks -
2 2 Roller Profiles (xrp, xrp) The xrp and xrp roller profiles are designed specifically for mounting roller elements or guide profiles to create nonpowered conveyor sections for material transfer or gravity feed. These profiles are suitable for distributed loads up to 90 kg/m (60 lbs./ft.). With either profile, supports should be located as needed but at intervals no greater than 2 meters ( 6 1 /2 feet) along the profile s entire length. Minimum length: mm Maximum length: 5600mm (nominal) Natural anodized aluminum 25 Technical Data xrp Moment of inertia Ix = 4.5cm 4 Iy = 11.9cm 4 Profile surface A = 5.3cm 2 Weight 1.4 kg/m Technical Data xrp Moment of inertia Ix = 9.6cm 4 25 Iy = 13.3cm 4 Section modulus Wx = 3.cm 3 Wy = 6.5cm 3 Profile surface A = 5.4cm 2 Weight 1.5 kg/m Non-Machined End Finish Options xrp, single, 5600mm long bottom T-slot xrp, single, square cut to length bottom T-slot / mm* xrp, package of 16, 5600mm long bottom T-slot xrp, single, 5600mm long bottom T-slot xrp, single, square cut to length bottom T-slot / mm* *Specify length mm 5600mm All dimensions are metric, with English dimensions in parentheses.
3 3 Roller Profiles (x50rp, x75rp) The x50rp and x75rp roller profiles are designed specifically for mounting roller elements or guide profiles to create nonpowered conveyor sections for material transfer or gravity feed. These profiles are suitable for distributed loads up to 90 kg/m (60 lbs./ft.). With either profile, supports should be located as needed but at intervals no greater than 2 meters ( 6 1 /2 feet) apart along the profile s entire length. Technical Data x50 RP Minimum length: mm Maximum length: 5600mm (nominal) Natural anodized aluminum Moment of inertia Ix = 15.2cm 4 Iy = 16.9cm 4 Section modulus Wx = 5.3cm 3 Wy = 7.5cm 3 Profile surface A = 6.9cm 2 Weight 1.9 kg/m Technical Data x75 RP Moment of inertia Ix = 49.5cm 4 Iy = 25.cm Section modulus Wx = 12.1cm 3 Wy = 11.5cm 3 Profile surface A =.4cm 2 Weight 2. kg/m Non-Machined End Finish Options x50rp, single, 5600mm long bottom T-slot x50rp, single, square cut to length bottom T-slot / mm* x75rp, single, 5600mm long bottom T-slot x75rp, single, square cut to length bottom T-slot / mm* *Specify length mm 5600mm All dimensions are metric, with English dimensions in parentheses.
4 4 Guide Profile Guide profile is perfect for use in any manual push-type material moving application or for gravity feed conveyors and feed racks. The polyamide 12 guide profile has a surface with a low coefficient of friction which permits pallets to move easily over its surface. The electrically conductive guide profile is suitable for ESD applications. Minimum length: mm Maximum length: 5600mm (nominal) Features: Electrically conductive Low coefficient of friction Guide profile: Electrically conductive Polyamide Non-Machined End Finish Options Kit includes xrp and guide profile, square cut to length / mm* Guide profile only, 5600mm, one Guide profile, 5600mm, bundle of Guide profile, square cut to length *Specify length mm 5600mm See pages 12-2 & 12-3 to order aluminum profile. All dimensions are metric, with English dimensions in parentheses / mm*
5 3 5 Roller Elements Roller elements mount into xrp or xrp profiles to create non-powered conveyor sections for material transfer or assembly. They are ideal for manual load and unload operations at workstations, or for gravity conveyor applications. There are three different roller types: (1) L-shape, for holding pallets, bins, or trays between rails, (2) U-shape, for holding trays with flanges on bottom, and (3) flat, where keeping trays directly aligned with rail is unnecessary or where other means of guiding trays exist. Maximum load per roller element: 20 N ( 4.5 lbs.). Black polyamide L-Shape Flat U-Shape Description L-shape roller element, one Flat roller element, one U-shape roller element, one
6 6 Support Rollers Support rollers are used to move components along the surface of mm T-slotted profiles. Typical uses include pallets, large sliding doors, and linear motion where critical tolerances aren t essential. Three types available: (1) roller with side shoulder, (2) roller with center shoulder, and (3) roller without shoulder. When using rollers with a shoulder, the shoulder may ride in the mm T-slot. All rollers have ball bearings for smooth rolling. Maximum load capacities: for downward forces 150 N (34 lbs.); for side forces 0 N (23 lbs.). Fastening hardware included. Roller: black polyamide Socket screw and T-nut: zinc-plated steel Without Shoulder Center Shoulder Side Shoulder Description Support roller with side shoulder, one Support roller with center shoulder, one Support roller without shoulder, one
7 7 T-Slot cover instead of mounting blocks Track Rollers Roller mounting block End cap With track rollers and standard framing components, it is easy to construct a low-cost, nonpowered roller conveyor to shuttle materials and components between workstations and process equipment. The rollers can be mounted in two ways: Directly into the T-slot of any profile or using the roller mounting blocks on page -. Two types of track rollers are available: plastic, and steel for heavy payloads. 40 PLASTIC STEEL FORCE 150N FORCE 500N Track roller Gussets x 60 Profile x Profile Foundation brackets & leveling feet Roller: plastic or steel max Leg set 2000 max Do not exceed maximum spacing for leg sets Roller length Roller length + 12mm Application Note Track rollers can be installed directly into the T-slot of any profile with an mm or mm T-slot without the use of roller mounting blocks. Set the frame rails 12mm wider than the roller itself and install cover strips in the T-slot between the rollers to maintain the spacing. Description Plastic track roller, 0mm, one Plastic track roller, 400mm, one Plastic track roller, 500mm, one Plastic track roller, 600mm, one Steel track roller, 400mm, one Steel track roller, 500mm, one Steel track roller, 600mm, one Steel track roller, 00mm, one
8 Track Roller Mounting Blocks The track roller mounting block is easily installed, requires no machining, and makes it convenient to mount track rollers. It is also possible to replace individual rollers without dismantling the entire system. Includes fastening hardware. Black polyamide Application Note Roller length Roller length + mm When using track roller mounting blocks, always make the frame rails mm wider than the roller length. Description Track roller mounting block, package of Track roller mounting block, package of
EcoShape the Tubular Framing System. Customer Presentation
EcoShape the Tubular Framing System Customer Presentation Market Requirements Your requirements: Quick, simple, and cost-efficient implementation of flow racks, workstations, and material shuttles for
More informationSection 13 Bosch EcoSlide Linear Sliding Carriages and Bearings
coslide Linear Sliding arriages and earings 1 Section osch coslide Linear Sliding arriages and earings The new osch coslides, along with the new slider bearings and the profile slider, provide an inexpensive
More informationGoTo Europe Focused Delivery Program. Product overview assembly technology
GoTo Europe Focused Delivery Program Product overview assembly technology 2 GoTo Europe Products you need, delivered when you need them In today s global competition every day counts. Fast response times
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More informationOverview. Bosch Rexroth Corp /11 Aluminum Framing. Linear Motion and Assembly Technologies. Section 8: Air Supply Elements
91 500 201 0/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Overview Air supply elements convert certain profiles into compressed air bars. Convenient and flexible pneumatic connections
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationTABLE OF CONTENTS SERIES 40
TABLE OF CONTENTS SERIES ALUMINIUM PROFILES SERIES PAGE Technical data and profile cross-sections 2.4-2.17 Processing of profiles for connectors 2.1-2.19 Prices of aluminium profile processing 2. Aluminium
More informationALUMINIUM PROFILE SYSTEM SERIES 40
ALUMINIUM PROFILE SYSTEM SERIES With the basic grid mm (slot 5); mm (slot 6), 16mm, mm and 0mm (slot ). In addition to this, the complete connection technology and a large range of accessories. TABLE OF
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationSection 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
More informationSingle Profiles. Standard NbV U Series
Standard NbV U Series Single Profiles All profiles from 0 NbV thru 8 NbV are from S450 J2 Modified in lengths to 12 meters. Longer lengths are available on request. PTI typically stocks 6 meter lengths
More informationSection 5 Transverse Conveyors
8981 00 22 11/07 TS4plus inear Motion and Assembly Technologies Bosch Rexroth Corp. -1 Section Transverse Conveyors BS4 are designed to transfer pallets for short transport distances (e.g. between two
More informationAluminium Profile Catalog Version 1.0 English
Aluminium Profile Catalog - 2008 Version 1.0 English Product Range Aluminium Profile and Accessories - Extruded aluminium profiles - Joining elements - Levelling feet - End covers and slot covers Assembly
More informationBS 2/K Transverse Conveyor
Modular Transfer Systems BS 2/K Transverse Conveyor for TSplus Conveyors Installation and Maintenance Guide Publication Number: 8981 500 207 11/00 2 Table of Contents INTRODUCTION... 3 TECHNICAL DATA...
More informationOverview. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) Bosch Rexroth Corp.
881 500 201 08/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Section : Caps and Finishing Elements Overview The wide variety of caps, end pieces, and T-slot covers helps you improve safety,
More information105000BT & BT/CT Series
15BT & 16BT/CT Series Ball Bearing and Cross Roller Bearing Tables Designed for high accuracy and extremely smooth motion, 1 series tables are ideal for light to moderate duty cycle applications such as
More informationPrecision Modules PSK. The Drive & Control Company
Precision Modules PSK The Drive & Control Company 2 Bosch Rexroth Coporation Precision Modules PSK R310A 2414 (2008.07) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear
More informationMaterial Handling System
72 The versatile Material Handling System Modern factories are geared towards high speed production. Time pressure increases constantly. Changeover time between production runs need to be shorter. Therefore
More informationVulkollan & Polyamide Combined Bearings
Vulkollan & Polyamide Combined Bearings Features of Vulkollan & Polyamide Combined Bearings Silent Operation, 8 Profile/Bearing sizes Travel Speeds up to 16 Ft/sec Low Friction from 2RS seals on Ball Bearings
More informationR310EN 2211 ( ) The Drive & Control Company
eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball
More informationConveyor track made of section profiles and roller elements
-4 MGE 1. Elements for manual movement Conveyor track made of section profiles and roller elements Economical solution for manual slide sections Roller elements can e clipped in Accessories: Roller elements
More informationPrecision Modules PSK
Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module
More informationEJP SERIES Right-angle Worm
EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationProfile-Channel Nut 050
-Channel pplication examples profile L X JU on GPM -Channel L- X- 25/10, 25/18 Cup- Cups X- 25/25, 50/25 JU- pplication examples base frame construction Cups- 29 -Channel -Channel pplication examples base
More informationIntroduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam.
Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load capacity that system life is rarely
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationComplete Workstations
Complete Workstations Modular designed workstations by offer a wide range of options and accessory combinations. All structural profiles used in our workstations are made of high strength aluminum, combined
More informationMTB 42 Belt Driven Linear Actuator
LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features
More informationmk Systems Profile Technology
PROFILE SYSTEMS mk Systems Profile Technology www.mkprofiles.com How to use the Catalog Series Icons The following symbols identify the suitability of a particular component to its respective Profile Series.
More informationLinear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
More informationProduct Description. Characteristic features R310A 2402 ( ) Linear Modules MLR
9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller
More informationCKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
More informationCompact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationUpdates and Corrections to Catalog Version 6.0
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service DCL SIS (Sales Information Service) Issued by: Date: Bosch Rexroth Corporation 16 East Third St., Buchanan,
More informationUniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41
Uniline ystem 1 Uniline series Uniline series Uniline series description ig. 1 Uniline is a family of ready-to-install linear actuators. They consist of internal ompact Rail roller sliders and steel-reinforced
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationPULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
More informationContents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
More informationFree Flow Chain U.S. TSUBAKI FREE FLOW CHAIN B - CONVEYOR CHAINS
U.S. TSUBAKI FREE FLOW CHAIN Free Flow Chain Free Flow Conveyor this is a conveyor system where the speed of conveyed objects can be freely controlled and stopped at any time and at any position for accumulation
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More informationProduct Overview Compressed Air and Electric Supply
Product Overview Compressed Air and Electric Supply Solutions from a single source! Solutions are born as ideas and implemented through products. Conductix-Wampfler s handling systems can be found in
More informationSHIMLESS INDUSTRIAL LINEAR BEARINGS
08 LINEAR MOTION SHIMLESS INDUSTRIAL LINEAR BEARINGS Shimless Industrial Linear Bearings are designed to be used in both low and high acceleration/deceleration applications. The Shimless Industrial Linear
More informationML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR LOW COST SOLUTION FOR PRECISION POSITIONING IN COMPACT SPACES!
ML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR Compact and easy to install, a low cost linear solution perfectly suited for the medical industry, life science and small scale automation applications.
More informationmechanics LES functional overview LES 4 LES 6 LES 5
LES functional overview LES 4 Overview B-36 B-38 with spindle drive LES 6 B-40 with spindle drive LES 5 B-42 with spindle drive Combination examples Motor modules Clutch housing Motor leads Installation
More informationEZ Tool Articulating Arm
EZ Tool Articulating Arm EZ tool arm features: Covers a 610 x 762 mm (24 x 30 inch) horizontal rectangular work envelope. Two piece arm with overall length from 864 to 1067 mm (34 to 42 inches). Anodized
More information1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
More informationS ST-SeriesBrochure_modified:STSeriesBrochure.qxd2/4/20091:32PMPage17 ST- T Series Straight Conveyors -Series your Material Handling Specialist
ST-Series ST-SeriesBrochure_modified:ST Series Brochure.qxd 2/4/2009 1:32 PM Page 17 ST-Series Straight Conveyors your Material Handling Specialist ST-SeriesBrochure_modified:ST Series Brochure.qxd 2/4/2009
More informationHighest Precision: SPL Series
Highest Precision: SPL Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the SPL Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
More informationLINEAR SLIDES RECISION NDUSTRIAL OMPONENTS DESIGN. Phone: FAX:
R RECISION NDUSTRIAL OMPONENTS R LINEAR SLIDES 2. 4. 3. 1. Ball Slides 2. X, X-Y, X-Y-Z Positioners with Micrometers 3. Rails 4. Crossed Roller Slides 1. 2-1 TECHNICAL SECTION Typical coefficient of friction
More informationSection VIII. Parts Lists and 3-D Drawings. EAF Conveyor - Assembled View
EAF Conveyor - Assembled View 54 EAF Conveyor - Dimensional Drawing 15.4" 7.4" BW+14.2" BW+9" 12.6" 22" Leg #1 A 15" Leg #2 4" BW+4.1" BW 3.4" Discharge Belt Height 4.2" Infeed Belt Height 1.5" 55 56 EAF
More informationRE / Connection Elements for Compact Modules. The Drive & Control Company
RE 82 618/2003-01 Connection Elements for Compact Modules The Drive & Control Company Connection Elements Connection elements for compact modules allow the fast and easy adaptation to profiles and supports
More informationLow backlash planetary gearheads General
Low backlash planetary gearheads General alpha Value Line Individual talents - Low-backlash planetary gearheads with output shaft (P, PL, PS, PR) or output flange (PT) - pplications in cyclic or continuous
More informationModular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationSince 1987, the NORCAN Company has been distinguished by its high-quality modular structures formed by aluminium profiles connected by standard M8
Since 1987, the NORCAN Company has been distinguished by its high-quality modular structures formed by aluminium profiles connected by standard M8 screw fixings: a system that is flexible in use, simple
More informationMOUNTING CARRIAGE TOPS
MOUNTING CARRIAGE TOPS Linear Motion Systems " I " Holes (4) are for customer mounting purposes. MOTOR TABLE TOPS USE M4X.7 TAPPED HOLES Material: Aluminum Alloy (6061) Finish: Black Anodized Note: Mounting
More informationCam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationX95 Structural Rails and Carriers CXL (M-CXL95-120) CXL95-80 (M-CXL95-80) CXL95-50 (M-CXL95-50)
TECHNICAL REFERENCE 1074 X95 Structural Rails and Carriers CXL95-120 (M-CXL95-120) CXL95-80 (M-CXL95-80) CXL95-50 (M-CXL95-50) Ideal for constructing large-scale, linear optical devices Rigid yet lightweight
More informationDURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
More informationRoller Conveyor Skatewheel & Flow Rail Ball Transfer Tables Accessories Frame Options Common Terms Questions to Ask
GravitymANUAL Table of Contents Roller Conveyor Skatewheel & Flow Rail Ball Transfer Tables Accessories Frame Options Common Terms Questions to Ask 2 3 4 5 7 9 11 ROLLER CONVEYOR 2 Based on their almost
More informationFlexible. Light. Productive. LEG Long-stroke Gripper
LEG Flexible. Light. Productive. LEG Long-stroke Gripper Light long-stroke gripper for flexible and highly dynamic handling of various components Field of Application For use in a clean working environment,
More informationDesign Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
More informationMT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR
MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES
More informationLEG. Application example. Electrical 2-Finger Parallel Gripper Long-stroke Gripper. Gripping force 1050 N 1500 N. Weight 9 kg 11.
LEG www.comoso.com Size 760 Weight 9 kg 11.6 kg Gripping force 1050 N 1500 N Stroke per finger 281 mm Workpiece weight 15.75 kg 22.5 kg Application example Gripping unit for top loading and palettizing
More informationSNR, YOUR GUIDE TO LINEAR MODULES
SNR, YOUR GUIDE TO LINEAR MODULES A bearing manufacturer known across the world For almost a century NTN-SNR has been focusing on the development, design and manufacture of bearings. Today NTN-SNR has
More informationProduct overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK)
10 Bosch Rexroth Corporation R310A 2602 (2008.09) CKK with ball screw drive (CKK) Product overview are precision, ready-to-install linear motion systems characterized by their high performance and compact
More informationLinear Bushings and Shafts Inch Series
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Linear Bushings and s Inch Series The Drive and Control Company
More informationMiniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
More informationRoller guide actuators - SQ ZST
Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple
More informationEcoFlow Manual roller sections bring everything closer
120 MPS 5.0 EcoFlow linking elements 842 58 281 (201-11) EcoFlow Manual roller sections ring everything closer The manual linkage of workstations with EcoFlow eases worker strain ecause products and workpiece
More information2210 Series Horizontal Conveyor
HFA 2210 Series Horizontal Conveyor The 2210 Horizontal Conveyor features a low profile yet extremely rigid anodized extruded aluminum frame angle adjustment of 0-30 degrees 2 ply, polyurethane, FDA approved
More informationSHIMLESS INDUSTRIAL LINEAR BEARINGS - PATENT PENDING
08 LINEAR MOTION SHIMLESS INDUSTRIAL LINEAR BEARINGS - PATENT PENDING Shimless Industrial Linear Bearings are designed to be used in both low and high acceleration/deceleration applications. The Shimless
More informationPRODUCT OVERVIEW HIGHEST PRECISION
PRODUCT OVERVIEW If you need high precision gear reducers at a reasonable cost and you value innovation and excellent service, take a close look at our product line. You ll find a wide range of products
More informationModular. Robust. Flexible. SWS Quick-change system
SWS Modular. Robust. Flexible. SWS Quick-change system Pneumatic tool changing system with patented locking system. Field of Application C an be used wherever short changeover times between a handling
More informationScrew Driven automation tables
Screw riven automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical
More informationConnection technology for Linear Motion Systems 1.3
Connection technology for Linear Motion Systems 1.3 2 Connection technology for Linear Motion Systems 1.3 Connection technology for Linear Motion Systems 1.3 3 Contents 4 Combination options for -Z linear
More informationRS/658. RS/658 AM Uses American 10/32 hardware RS/658 EU Uses European 6 mm hardware RS/10
RS/658 14-Space Tilt-Adjustable Rack Stand Perfect for tape machines and digital recorders Full-circle tilt adjustability allows precisely angle positioning of rack gear Dino-Bite locking disc provides
More informationKinetix Linear Motion Specifications MP-Series, TL-Series, LDAT-Series, LDC-Series, LDL-Series
Technical Data Kinetix Linear Motion Specifications MP-Series, TL-Series, LDAT-Series, LDC-Series, LDL-Series Topic Page LDAT-Series Integrated Linear Thrusters 2 MP-Series Integrated Linear Stages 37
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS
More informationTechnical Data MM Channel
Technical Data MM Channel The enclosed pages are taken from the Installation Systems Catalogue 2015 for additional information please visit the technical library at www.hilti.co.uk or call our Technical
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationECOLINE: AFFORDABLE AND INNOVATIVE LINEAR BEARINGS
ECOLINE: FFORDBLE ND INNOVTIVE LINER BERINGS ECOLINE s products have been designed to fit in applications where quality movement is needed at a low price. The patented design offers a well-protected, smooth
More informationAmerican Made and American Engineered. Quality Conveyors Since 1948
American Made and American Engineered Quality Conveyors Since 1948 Design and Construction Features ToughTrak Tough and Durable Low Profile Conveyors ToughTrak low profile conveyors are lean and mean working
More informationRotational Kinematics and Dynamics Review
Rotational Kinematics and Dynamics Review 1. The Earth takes slightly less than one day to complete one rotation about the axis passing through its poles. The actual time is 8.616 10 4 s. Given this information,
More informationDENSO four-axis robots include the HS and HM Series. z Inspection. z Material handling z Assembly. z Material removal
DENSO 4-axis robots DENSO four-axis robots include the HS and HM Series. Also known as SCARAs (selective compliance articulated robot arms), four-axis robots are the perfect option for a wide range of
More informationLinear guides MGE 13.2 Linear guides
13-2 MGE 13.2 Linear guides Linear guides For constructing linear guides based on cam roller guides Cam roller guides are suitable for applications with high speeds and medium loads, in particular for
More informationmechanics LES functional overview LES 4 LES 6 LES 5
LES functional overview LES 4 with spindle drive Overview 2-54 2-56 LES 6 2-58 with spindle drive LES 5 2-60 with spindle drive Calculations 2-62 Combination examples Motor modules Clutch housing Motor
More informationLINEAR MOTION COMPONENTS. hepcomotion.com
LINEAR MOTION COMPONENTS hepcomotion.com GV3 Linear Guide System SL2 Stainless Steel Linear Guide Extreme Temperature and 4 System 6 Vacuum Linear Guide System 7 MHD Track Roller Guide System Ball Bushings
More information...components in motion. Easy Rail
...components in motion Easy Rail Easy Rail Introduction The Easy Rail family have a compact cross-section and low-friction movement. Robust and Long Service Life Easy Rail s range of cross-sectional rail
More informationFeatures. Engineered for Small Part. Compact Frame & Drives. Small Roller Diameter. Pinch Drive Design (patent pending) Clean Room Certified
Innovative Design Engineered for Small Part Handling / Transfer FDA Approved Belting (low, medium & high friction) Optional 5/16" Nose Bar on one or both ends (Actual Size) Features Compact Frame & Drives
More informationAmerican Made and American Engineered. Quality Conveyors Since 1948
American Made and American Engineered Quality Conveyors Since 1948 Design and Construction Features ToughTrak Tough and Durable Low Profile Conveyors ToughTrak low profile conveyors are lean and mean working
More informationndustr SNR our guide to linear modules
ndustr SNR our guide to linear modules SNR A bearing manufacturer known across the world For almost a century SNR has been focusing on the development, design and manufacture of bearings. Today SNR has
More informationPrecise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
More informationProduct Information. Long-stroke gripper PHL 32
Product Information PHL 32 PHL Flexible. Precise. Powerful. PHL long-stroke gripper 2-finger parallel gripper with large jaw stroke for large parts and / or a broad range of parts Field of application
More informationi n t e g r a t e d i n n o v a t i o n
i n t e g r a t e d i n n o v a t i o n R O B O T T R A N S F E R U N I T S Welding Robot Robot Transfer Units (RTUs) are an economical means to extend the working envelope of an industrial robot. TranTek
More information