Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL

Size: px

Start display at page:

Download "Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL"

Frederick Douglas
5 years ago
Views:

1 LINEAR UNIT RHL

2 Svanemærket tryksag INDEX Index Product overview... 4 Technical data... 5 RHL... 6 Sliders for RHL: V1, V25 & V RHL Sliders for RHL11: V2 & V Mounting Plates... 1 T-slot, Angle Bracket & Fixing Element Sensor Transmission & Lubrication Order code Product overview

PRODUCT OVERVIEW TECHNICAL DATA Linear Unit RHL My Mx Mz Fa Fr Article No. Slider length Weight/kg Permissible load (N) Permissible moment (Nm) mm Mass of slider Stroke mm Pr.

3 PRODUCT OVERVIEW TECHNICAL DATA Linear Unit RHL My Mx Mz Fa Fr Article No. Slider length Weight/kg Permissible load (N) Permissible moment (Nm) mm Mass of slider Stroke mm Pr. 1 mm Fa Fr Mx My Mz The belt driven linear units type RHL and RHL11 are ready to mount, complete units which saves both cost and time in the construction phase. The units are based on aluminium profile and equipped with monorail, belt and pulleys The units are stocked in semi-finished components and can be assembled and shipped within a few days. RHL-V1 1,8 5,2, RHL-V ,7 7,4, RHL-V5 5 2,6 1,1, RHL11-V2 2 1,8 14,5 1, RHL11-V5 5 3,8 2,4 1, Customized versions can be made - please contact Rollco. 4 5

4 DIMENSIONS RHL SLIDERS FOR RHL RHL Slider V1 for RHL Magnet 1 Slider Stroke x M8 thread Total length = Stroke + slider + 16 Stroke: We recommend to add min. 5 mm to the nominal stroke (stroke = nominal stroke + 5 mm) Slider V25 for RHL 25 3, Ø 14, Ø 11, B Track for sensors ,5 A 45 8 x M8 thread 15, , , ,4 68 Slider V5 for RHL 5 2,46 2, ,5 44,5 68,54 68, H7 14 H7 16 H7 3 9 Ø11 Spline Pulley 4x M5 7,5 8 x M8 thread 6 7

5 DIMENSIONS RHL11 SLIDERS FOR RHL11 RHL11 Slider V2 for RHL11 Magnet Slider Stroke Total length = Stroke + slider + 22 Stroke: We recommend to add min. 5 mm to the nominal stroke (stroke = nominal stroke + 5 mm) 8 x M8 11 Slider V5 for RHL11 11 Track for sensors , , x M8 3, , x M H7 19 H7 H ,5 8 9

MOUNTING PLATES T-SLOT, ANGLE BRACKET & FIXING ELEMENT Mounting Plate for RHL T-slot RHL-MP Thread on request Hole pattern on

RHL) PN435 (RHL5-M5) (for RHL) PN135 (RHL8-M5) (for RHL & RHL11) PN14 (RHL8-M6) (for RHL & RHL11) PN145 (RHL8-M8) (for RHL & RHL11)

pattern on request min. Ø 5 mm, max. Ø 135 mm Ø 7 4 x Ø 6,6 THRU ALL Ø 13,71 x 9 Fixing Element 17 11 8 1 Article No.

6 MOUNTING PLATES T-SLOT, ANGLE BRACKET & FIXING ELEMENT Mounting Plate for RHL T-slot RHL-MP Thread on request Hole pattern on request min Ø 45 mm, max Ø 6 mm Ø 68 4 x Ø 6,6 THRU ALL Ø 12,9 x 9 T-nuts available: PN425 (RHL5-M3) (for RHL) PN43 (RHL5-M4) (for RHL) PN435 (RHL5-M5) (for RHL) PN135 (RHL8-M5) (for RHL & RHL11) PN14 (RHL8-M6) (for RHL & RHL11) PN145 (RHL8-M8) (for RHL & RHL11) Angle Bracket R1 8 RHL6-44 (for RHL & RHL11) 17 21,6 Mounting Plate for RHL11 4 8,6 4 2 RHL11-MP Thread on request Hole pattern on request min. Ø 5 mm, max. Ø 135 mm Ø 7 4 x Ø 6,6 THRU ALL Ø 13,71 x 9 Fixing Element Article No. A B C E F H RHL-FE8S (side) M8 RHL-FE5B (bottom) , M8 RHL11-FE8S (side) M8 RHL11-FE8B (bottom) M8 1 11

7 SENSOR TRANSMISSION & LUBRICATION Sensor Transmission RHL-BMF235K-PS (Normally Open) RHL-BMF235K-PO (Normally Closed) Type RHL RHL11 Precise readjustment All-electronically Vibration resistant High protection class Max. speed (m/s) 2,5 2,5 Max. moment of rotation* (Nm) Pulley radius (mm) 28,65 36,6 Belt type AT 5 AT 1 Belt width (mm) Tooth pitch (mm) 5 1 Max traction load* (N) 6 2 Belt breaking strength (N) Stroke for shaft revolution (mm) 1 23 * For higher values please contact Rollco Lubrication Technical details: RHL-BMF235K-PS (NO) RHL-BMF235K-PO (NC) The RHL system is equipped with sliders that are fitted with a lubrication system. This helps to keep the grease inside the block and reduce the need for relubrication. As an option the RHL system can be mounted with a so called Maintenance Free Sealing system, that under test has shown a life time of 32. KM with light load without any relubrication. Service voltage V DC Output PNP, NO PNP, NC Maximum rating 2 ma Contact rating 6 W max. (3 V, 2 ma) Internal power consumption 6 ma Voltage drop, static 2,5 V max Operating frequency 5 Hz Reproducibility,1 mm Ambient temperature C Insulation voltage endurance 75 V DC Protection class IP 67 Indicators LED: yellow output signal Mounting Hex key size 2, mm. Max. tightening torque,4 Nm Casing material PA12 Connection Cable PUR, 2, m as standard Approval CE Short circuit protected Yes Please contact Rollco for more information

ORDER CODE PRODUCT OVERVIEW Order Code Product

Stroke Sliders for RHL V1 V25 V5 Sliders for RHL11 V2

LINEAR UNIT QME Complete linear drive unit with ball

LINEAR UNIT RHL Complete unit with tooth belt.

belt. Drive Hollow Shaft with Keyway or Spline Pulley

Drive Hollow Shaft with Keyway for RHL11 Ø 16 H7 Ø 19

drive options U-RAIL Rollers in steel or polyamide.

COMPACT RAIL No more problems with parallelism.

T-slot, Angle Bracket, Mounting Plate and Sensor must

C-RAIL A simple and cost effective linear bearing

rail system. MINIATURE Range from 3 mm up to 15 mm.

ROLLER GUIDES Four raceways with rollers.

HEAVY TELESCOPIC The strongest solution for extraction.

8 ORDER CODE PRODUCT OVERVIEW Order Code Product Overview RHL V5 - H14 Unit type RHL RHL11 Stroke Sliders for RHL V1 V25 V5 Sliders for RHL11 V2 V5 BALL SCREWS High effiency ball screws and nuts. LINEAR UNIT QME Complete linear drive unit with ball bushings and ball screws. LINEAR UNIT RHL Complete unit with tooth belt. LINEAR UNITS Complete unit with ball screw or tooth belt. Drive Hollow Shaft with Keyway or Spline Pulley for RHL Ø 12 H7 Ø 14 H7 Ø 16 H7 Ø 11 spline pulley Drive Hollow Shaft with Keyway for RHL11 Ø 16 H7 Ø 19 H7 ALUMINIUM PROFILES A full program of aluminium profiles and accessories. BELT CONVEYOR Transportation system with different drive options U-RAIL Rollers in steel or polyamide. For light, standard or heavy load. Mounted in U-rails. COMPACT RAIL No more problems with parallelism. Low noise. Lifetime lubricated bearings. T-slot, Angle Bracket, Mounting Plate and Sensor must be ordered seperately. C-RAIL A simple and cost effective linear bearing system LINEAR RAIL SYSTEM The most standardized linear rail system. MINIATURE Range from 3 mm up to 15 mm. EASYSLIDE A strong solution for short strokes. ROLLER GUIDES Four raceways with rollers. High load capacity. HEAVY TELESCOPIC The strongest solution for extraction. LIGHT TELESCOPIC Telescopic systems for smooth movement. Steel and aluminium. BALL BEARINGS Linear ball bearings and hardened steel shafts. Every care has been taken to ensure the accuracy of the information contained in this catalogue but no liability can be accepted for any errors or omissions. Even partial reproduction is allowed only by written permission by Rollco

9 Rollco AB Box Ekvändan Helsingborg Sweden Tel Fax Rollco A/S Ladegårdsvej 2 71 Vejle Denmark Tel Fax Rollco Oy Sarankulmankatu Tampere Finland Tel Fax Rollco Norge AS Bergliveien Gullaug Norway Tel Fax Linear Unit RHL Rollco Taiwan No. 28, Lane 125, Da-an Road Shulin District 238 New Taipei City, Taiwan Tel Fax

Any reproduction, even partial, is allowed only by written permission by Rollco.

Any reproduction, even partial, is allowed only by written permission by Rollco. LINEAR UNIT RHL Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make