Shelbourne Header. Rvs 28 PARTS MANUAL REYNOLDS

Transcription

1 MAN -090 Shelbourne Header Rvs PARTS MANUAL F w REYNOLDS Shelbourne Reynolds Inc. Colby P0 box 0 0 Country Club Drive Colby, Kansas 0 U.S.A. Telephone: () 99 Fax: (),t...-. It- $ V L - INVEST IN PEOPLE Shelbourne Reynolds Engineering Ltd Stanton Bury St Edmunds Suffolk lpl AR England Telephone: (09) 0 (Stores direct (09) ) Fax: (09) 0 (Stores direct (09) 0) visit our website ISSUE

2 SHELBOURNE HEADER SERIAL NUMBER SHELBOURNE HEADER MACHINE NUMBER Your Shelbourne Header is designed to fit many different types of combine For this reason the machine number index is broken down into sections for identification. Your serial and machine numbers are listed below: MACHINE IDENTIFICATION part. repeated in the left-hand side of your parts listing, and therefore referring to the correct The drawings indicate the components by item numbers, which you will find, are looking at the facing page or progressing through the manual to the next drawing. Having found the correct parts list, you will find the corresponding drawing by either hand corner; the sub-assemblies are in numerical order. that sub-assembly description which will begin with to find the parts listing of the sub-assembly further on in the manual. The number will be printed in the top left Having decided which sub-assembly your part should be under, use the number beside Use the following sub assembly numbers and descriptions to find the area of the your part will be in the auger sub assembly parts list. machine that your part is required, i.e. if you need a part which is fitted to the auger, assemblies. Refer to the front page of this parts list section (machine assemblies), listing all the sub ALWAYS QUOTE THE MACHINE AND SERIAL NUMBERS WHEN DERING. following procedure. To ensure that you order the correct part from your SRE dealer please use the DERING SPARE PARTS KIT OPTION KIT OPTION KIT OPTION KIT OPTION KIT OPTION KIT OPTION KIT OPTION KIT OPTION KIT OPTION HYDRAULIC FITTING KIT DRIVE KIT ADAPT PLATE ASSEMBLY SHELBOURNE HEADER PARTS MANUAL

3 Header Lights Sub. 9 Rvs Shelbourne Header. 99 Rvs Shelbourne Header. GEA GEA KIT-09. KIT-Ol 0. KIT-Ol 0a. KIT-Ol Gb. KIT-Ol KIT-00. KIT-00. KIT-00. KIT-00. KIT-00. KIT KIT GEA-00. KIT-009. KIT-al.KIT Rvs HEADER Rotor Pulley Assembly Rotor Pulley Assembly Rotor Puley Assembly Rotor Pulley Assembly Stripping Rotor Assembly (RH).m Stripping Rotor Assembly (LH).m Top Door Cowl Assembly Stripping Rotor Assembly (LH).m. Belly Wear Plate kit Universal Belly Wear Plate Kit Van Speed Control Kit (header) Van Speed Controller (combine) Ball Joint Coupling Ball Joint Coupling Rotor Mounting Sub Assembly Rotor Mounting Sub Assembly Rotor Gearbox Assembly Divider Sub Assembly Divider Sub Assembly (00 & on) Frame And Parts Sub Frame And Parts Sub Rotor Mounting Sub Assembly Input Gearbox Mounting Sub Assembly Input Gearbox Mounting Sub Assembly Input Gearbox Mounting Sub Assembly Rvs Dividers Input Gear Dropbox Assembly Input Gear Dropbox Assembly Adjustable Crop Deflector Sub Assembly Emblems And Guards Sub (upto 00) Emblems And Guards Sub (00 & on) Hydraulic Circuit Sub PTO End Guard PTO End Guard Gearbox Input Shaft Sub Auger Assembly Auger Mounting ( spring) Sub Assembly Auger Mounting ( spring/splined) Sub Assembly Auger Mounting ( spring/splined) Sub Assembly Rvs/Rsd Auger Assembly Spiral Paddle Auger Drive Sprocket/ Spring Clutch Assembly Auger Drive Sprocke/ Spring Splined Clutch Assembly F Rvs MACHINES LIST OF KIT NUMBERS

4 . RDS-000 Tacho Kit (00 & on). RDS-000 Tacho Kit (00 & on). RDS-000 Tacho Kit (00 & on) KIT OPTION 9.KIT-0 OKIT-0 KIT-0 Roller Kit 0 Flight Extension Kit (Hard) Spill Plate Extension Kit PRINTED 0/0/09

5 ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION Shelbourne Reynolds Engineering Limited ASSY NUMBER: 99 ASSY DESCRIPTION: Rvs SHELBOURNE HEADER FRAME FRAME & PARTS(00 & ON) & PARTS (UPTO 00) AUGER ASSY AUGER MTG SUB (00 & ON) AUGER MTG SUB(00 TO 00) AUGER MTG SUB (00 ONLY) STRIPPING ROT ASSY. LH STRIPPING ROT ASSY. RH ROT MTG SUB KIT 00 KIT 09 DIVIDER SUB (00 TO 00) DIVIDER SUB (PRE 00) HEADER LIGHTS SUB(USA ONLY) BELLY PAN WEAR KIT(00 ON) BELLY PAN WEAR KIT(PRE 00) 99 INPUT GEARBOX MTG SUB 99 HYDRAULICS 9 99 TOP DO COWL SUB ASSY 0 99 ADJ CROP DEFLECT SUB 90 0 EMBLEMS & GUARDS(00 & ON) 90 0 EMBLEMS & GUARDS(UP TO 00) RDS 000 HEADER MONITING KIT RDS 000 COMBINE MONIT KIT RDS 000 COMBINE MONIT KIT 99 0 DIVIDED SUB (00 & ON)

6 OTY Shelbourne Reynolds Engineering Limited LASSY NUMBER: 9 ASSY DESCRIPTION: Rvs SHELBOURNE READER ITEM PART NO DESCRI PT ION FRAME & PARTS (00 & ON) FRAME & PARTS (UPTO 00) AUGER ASSY (00 & ON) QTY IT EM PART NO 9 K IT - 00 DESCRIPTION HEADER LIGHTS SUB(USA ONLY) BELLY PAN WEAR KIT AUGER ASSY (UPTO 00) AUGER MTG SUB STRIPPiNG ROT ASSY. LH STRIPPING ROT ASSY. RH ROT MTG SUB ROT MTG SUB (00 ONLY) IN.G.BOX MTG SUB IN.G.BOX MTG SUB (00 ONLY) HYDRAULICS TOP DO COWL SUB ASSY ADJ CROP DEFLECT SUB EMBLEMS & GUARDS RDS 000 RDS HEADER MONITING KIT COMBINE MONIT KIT DIVIDER SUB (00 & ON) 9 0 DIVIDER SUB (UP TO 00)

7 9, 99, 9 & 9

8 ASSY NUMBER: 9 ASSY DESCRIPTION: Cvs HEADER LIGHTS SUB ITEM [PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY Shelbourne Reynolds Engineering Limited la 9 0 LMP- 00 BLB SCW 0 ETM :ii TPE 0 00 TPE 000 TPE 0 0 TPE INDICAT LIGHT ASSY BULB LOOP TERMINAL SELF TAP SCREW MALE BULLET TERM. WIRE LOOM & PLUG ASSY INDICAT GUARD LOOM & PLUG ASSY (JD ONLY) (PRE 0 SERIES) LOOM & PLUGS ASSY (JD ONLY) (0 SERIES ONWARDS) REFLECTIVE TAPE REFLECTIVE TAPE REFLECTIVE TAPE REFLECTIVE TAPE LOOM & PLUG ASSY (00 SERIES) LOOM & PLUG ASSY (CX/CR SERIES) - AMBER - AMBER - RED - RED (CIH ONLY) (NH ONLY)

9 9 TERMINATES F CASE H F COMBINES ONLY

10

11 Shelbourne Reynolds Engineering Limited ASSY NUMBER: 9 0 ASSY DESCRIPTION:STRIpPING ROT ASSY (R/H).m ITEM PART NO QT Y ITEM HSSGOO HSSFO 99 0 WSH 0 SCW KIT BPG DESCRIPTION OUTER HUB CASTING L.H. OUTER HUB CASTING R.H. INNER HUB CASTING ROT SECTION.M ROT SECTION.M(ROLE) SET SCREW STANDARD ELEMENT END HOLE ELEMENT CENTRE END HOLE ELEMENT SEED SAVER CTR (PROFILED EDGE) SEED SAVER STR (STRAIGHT EDGE) SEED SAVER RH END (PROFILED EDGE) SEED SAVER RH END (STRAIGHT EDGE) SEED SAVER RH CTR (PROFILED EDGE) SEED SAVER RH CTR (STRAIGHT EDGE) CTR FINGER RH SET SCREW ANTI WRAP PLATE PENNY SELF TAP.SCREW IDLE SHAFT W/A BALL COUPLING KIT OUTER CLAMP RING BODY PLUG BALANCE WEIGHT BALANCE WEIGHT BALANCE WEIGHT PART NO DESCRI PT ION QTY NOTE. ITEMS 0, BOTH TYPE INTERCHA BALANCE I TYPES ON OPPOSITE NOTE. ITEMS PARTS WHE FLANGES SEE LH RO FLANGES? AND. S OF SEED SAVERS ARE GEABLE BUT F ASONS IF MIXING ROT FIT AS PAIRS. ND ARE CRECT T FINGERS SET WITH? - IE. AGGRESSIVE. L ASSY PARTS WHEN E REQUIRED DOWN.

12 Shelbourne Reynolds Engineering Limited ASSY NUMBER: 9 0 ASSY DESCRIPTION:STRIPPING ROT ASSY (L/H).m IT EM PART NO QT Y ITEM HSSGOO HSSEO 99 0 WSH 0 SCW KIT BPG I 0 DESCRIPTION OUTER HUB CASTING L.H. OUTER HUB CASTING R.H. INNER HUB CASTING ROT SECTION.M ROT SECTION.M SET SCREW STANDARD ELEMENT END HOLE ELEMENT CENTRE END HOLE ELEMENT SEED SAVER CTR (PROFILED EDGE) SEED SAVER CTR (STRAIGHT EDGE) SEED SAVER LH END (PROFILED EDGE) SEED SAVER LH END (STRAIGHT EDGE) SEED SAVER LH CTR (PROFILED EDGE) SEED SAVER LH CTR (STRAIGHT EDGE) CTR FINGER LH SET SCREW ANTI WRAP PLATE PENNY SELF TAP.SCREW CENTRE SHAFT W/A BALL COUPLING KIT OUTER CLAMP RING BODY PLUG BALANCE WEIGHT BALANCE WEIGHT BALANCE WEIGHT EMBLEM HL-E I PART NO DESCRI PT ION QT Y NOTE. ITEMS ( BOTH TY] INTERCHJ REASONS ROT F NOTE. ITEMS PARTS WI FLANGE S SEE RH F FLANGES AND. ES OF SEED SAVERS ARE GEABLE BUT F BALANCE IF MIXING TYPES ON A r AS OPPOSITE PAIRS. AND ARE CRECT N FINGERS SET WITH - IE. AGGRESSIVE. )T ASSY PARTS WHEN RE REQUIRED DOWN.

13 ,Om LH ROT ILLUSTRATED FIfED ONLY 9 / ii I/IJ SEED SAVER FINGERS FflTED AS SHOWN PROFILED EDGE STRAIGHT EDGE N.B ITEM FIfED TO 9 0 RH ROT

14 ASSY NUMBER: 990 ASSY DESCRIPTION: AUGER ASSY Rvs ITEM PART NO DESCRIPTION QTY EM[PART_NODEScRIPTION QTY 0 Shelbourne Reynolds Engineering Limited HSSFO BRG- 00 BRG-00 HSS 09 W S H 00 WSH AUG SCCAO NUT AUG C AUG 0000 HSS 00 WSH 0009 NUT SCBAO WSH 00 WSH 00 AUGER WELD ASSY. AUGER DRIVE SHAFT(00 ON) AUGER DRIVE SHAFT(PRE 00) SET SCREW BEARING BEARING SET SCREW PLAIN SPRING AUGER SHAFT AUGER CRANK FINGER HOLDER AUGER CLAMP CAP HD SKT SCREW NYLOC NUT HARDENED FINGER ( FINGERS OPTION) (0 FINGERS OPTION) ( FINGERS OPTION) HAIRPIN COTTER ( FINGERS OPTION) (0 FINGERS OPTION) ( FINGERS OPTION) AUGER FINGER GUIDE ( FINGERS OPTION) (0 FINGERS OPTION) ( FINGERS OPTION) SET SCREW PLAIN NYLOC NUT BLANKING PLATE ( FINGERS OPTION) (0 FINGERS OPTION) ( FINGERS OPTION) INSPECTION COVER BUT. SCKT HD SCREW SPRING SPRING U WSH 00 NUT- 0 NUT 0 AUGER FLIGHT EXTENSION LH AUGER FLIGHT EXTENSION RH PLAIN NYLOC NUT NYLOC NUT

15 0 F m 0 IC 0ci (0 Co 0

16 ASSY NUMBER: 99 0 ASSY DESCRIPTION: AUGER MTG ( SPRING) SUB ASSY Shelbourne Reynolds Engineering Limited ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY BRG 0 BLT- WSH 00 NUT BLTA NUT- 0 9 NUT-00 WSH 00 HSS 00 NUT BLT- 0 K00 0 KIT 009 WSH 000 NUT- 0 0 PIN K SCW 0 HSS BRG-99 CIR WSH ADJUSTER PLATE LH BEARING COACH BOLT PLAIN NYLOC NUT ADJUSTER SPACER BOLT NYLOC NUT NUT PLAIN SET SCREW PLAIN NUT SUPPT PLATE OVERLAP PLATE COACH BOLT KEY AUGER SLIP CLUTCH (SEE PARTS LIST KIT 009) PLAIN CASTLE NUT SPLIT PIN ADJUSTER PLATE RH KEY FINGER ADJUSTER GRUB SCREW SET SCREW PLATE SPROCKET IDLER BEARING CIRCLIP IDLER SPINDLE IDLER ADJ. SCREW IDLER SPACER SPRING WSH 00 PLAIN

17 ASSY NUMBER: 99 0 ASSY DESCRIPTION: AUGER MTG ( SPRING/SPLINED) SUB ASSY Shelbourne Reynolds Engineering Limited BRG 0 BLT- WSH 00 NUT BLTA NUT-09 NUT-00 WSH 00 HS S 00 NUT BLT-0 KIT 00 WSH 000 NUT-00 RI N K SCW 0 HSS BRG 99 CI R WSH ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY ADJUSTER PLATE LH BEARING COACH BOLT PLAIN NYLOC NUT ADJUSTER SPACER BOLT NYLOC NUT NUT PLAIN SET SCREW PLAIN NUT SUPPT PLATE OVERLAP PLATE COACH BOLT AUGER SLIP CLUTCH (SEE PARTS isrr KIT 00) PLAIN CASTLE NUT SPLIT PIN ADJUSTER PLATE RH KEY FINGER ADJUSTER GRUB SCREW SET SCREW PLATE (UPTO 00) SPROCKET IDLER BEARING CIRCLIP IDLER SPINDLE IDLER ADJ.SCREW IDLER SPACER SPRING WSH PLAIN SECURING BLOCK (UPTO 00)

18 I Shelbourne Reynolds Engineering Limited ASSY NUMBER: 99 ASSY DESCRIPTION: AUGER MTG( SPR/SPI.J,)SUB ASSY RVS/RSD ITEM PART NO DESCRI PT ION QTY IT EM PART NO DESCRI PT ION QTY ] 9 0 BRG 0 HSS 0 9 WSH- 00 NUT BLTA NUT- 0 9 NUT-00 WSH 00 HSS 0 0 NUT-C BLT 0 KIT 0C WSH 000 NUT-C 0 PIN 0 9 Cl KC Cl SCW 0 HSS C 9 Cl 0 Cl BRG-99 CIR CC CO Cl WSH ADJUSTER PLATE LH BEARING SETSCREW PLAIN NYLOC NUT ADJUSTER SPACER BOLT NYLOC NUT NUT PLAIN SET SCREW PLAIN NUT SUPPT PLATE OVERLAP PLATE COACH BOLT AUGER SLIP CLUTCH (SEE PARTS LIST KIT-00) PLAIN CASTLE NUT SPLIT PIN ADJUSTER PLATE RH KEY SINGER ADJUSTER GRUB SCREW SET SCREW PLATE (UPTO 00) SPROCKET IDLER BEARING CIRCLIP IDLER SPINDLE. IDLER ADJ.SCREW ID. LER SPACER SPRING -L L I W S H 00 WSH 00 NUT-C W S H CO PLAIN SPRING NUT SPRING

19 )_--- < PRE ONLY C9 0

20 ASSY NUMBER: 99 ASSY DESCRPTION: HYDRAULIC CIRCUIT SUB Cvs Shelbourne Reynolds Engineering Limited 9 0 RE F HHBC0 HHBC 00 HPPDO 00 FIT 0 CLP 0 0 SCW 90 WSH 0009 NUT-00 ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY HYDRAULIC RAM HYDRAULIC HOSE LH HYDRAULIC HOSE RH HYD.TEE FITTING HYD.BULKHSAD FITT P CLIP BUTT.SCK.HD SCREW PLAIN NYLOC NUT I

21 99

22 Shelbourne Reynolds Engineering Limited ASSY NUMBER: 99 ASSY DESCRiPTION: TOP DO COWL ASSY Rvs ITEM PART NO DESCRIPTION a BSH NIP COOl GSTA0 BLTAO9O WSH 00 WSH 00 NUT-0 NUT-0 HSS 0 9 EDS 9 0 WSH HSS 00 WSH 0 NUT PIN RCL-00 CHN-0 HSS 00 NUT-00 WSH RM SK 0000 JAC 00 JAC-0 0 COWL ASSY (009 ON) COWL ASSY (00 0) COWL ASSY (UPTO 00 BUSH LARGE COWL PIN GREASE ZERK (UPTO 009) GAS STRUTT (UPTO 00) BOLT (00&ON) (UPTO 00) NUT (00 & ON) NUT (UPTO 00) SETSCREW (00 &ON) SEAL STRIP (UPTO 00) TRANSFER SPRING SEAL CLAMP PLT (UPTO 00) SEAL CLAMP PLT (UPTO 00) BUMP STOP SETSCREW (UPTO 00) (UPTO 00) NYLOC NUT (UPTO 00) HAND PUMP BRKT (00 & ON) STAGE BRKT (00 & ON) RAM STOP (00 & ON) SPRING D PIN (00 & ON) TRANSFER(RAM STOP) (00&ON R CLIP (00 & ON) I CHAIN (00 & ON) 0 SETSCREW (00 & ON) NYLOC NUT (00 & ON) PLAIN (00 &ON) HYD CYLINDER (00 & ON) I RAM SEAL KIT HID HAND PUMP (00 & ON) I HID RESERVOIR (00 & ON) QT I IT EM PART NO DESCRI PT ION QTY 9 0 JAC SCW-0 HHCCO HAPAAOO W S F-I POP 000 POP JACK HANDLE (00 & ON) GRUB SCREW (00&ON) HID HOSE (00&ON) HYD REST (00&ON) DOWTY (00&ON) CLAMP STRIP (END) (00&0) CLAMP STRIP (HANDL) (00&0) CLAMP STRIP (INNER) (00&0) CLAMP STRIP (SMALL) (00&0) CLAMP STRIP (CENTR) (00&0) SEALING STRIP ( ) (009&ON) SEALING STRIP ( ) (00&0) POP RIVETS (009 & ON) POP RIVETS (00 & 00) CLAMP STRiP (mm) (009&ON CLAMP STRIP (9mm) (009&ON) CLAMP STRIP (mm) (009&ON

23 N / / / (0 (0 C) C w Ci) C)

24 ASSY NUMBER: 99 ASSY DESCRIPTION: ADJ,CROP DEFLECT SUB ASSY Rvs ITEM PART NO DESCRIPTION QTY ITEM PART NO LESCRIPTION Shelbourne Reynolds Engineering Limited POP-C WSH 00 HSS ADJ. CROP DEFLECT SPINDLE (00 & ON) SPINDLE (UP TO 00) SEAL STRIP(00 & ON) SEAL STRIP(UP TO 00) CLAMP STRIP(00 & ON) CLAMP STRIP(UP TO 00) POP RIVET ROLLER EMBLEM (SHELBOURNE REYNOLDS) EMBLEM (Rvs) FRONT CLAMP STRIP(TO 00) PLAIN SPRING SETSCREW NYLON ROLLER TRANSFER I

25 > z G) m m z z

26 ASSY NUMBER: 99 ASSY DESCRIPTION:INPUT GEARBOX MTG SUB ASSYCvs ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY I Shelbourne Reynolds Engineering Limited 9 0 ii GEA-00 BLTA 0 NUT-00 WSH 00 NUT- 0 9 MOTET BLTA0 B RG BEL BEL WSH 00 WSH 00 WSH -00 NUT-0 NUT-0 NUT- 0 BLT-0 BLT KIT-00 KIT-0 INPUT GEARBOX ASSY BOLT NUT NUT ACTUAT ADJUSTER BRACKET ADJUSTER ASSY BOLT BEARING SPACER IDLER SPACER BELT (00 & ON) BELT (UP TO 00) (00&ON) (UPTO 00) NUT NUT (00&ON) NUT (UPTO 00) COACHBOLT COAC H BOLT TIE ROD END ASSY(00 & ON) TIE ROD END ASSY(UPTO 00) TIE BAR ASSY(00 & ON) TIE BAR ASSY(Ornm UPTO 00 TIE BAR ASSY(mm BEARING) TIE ROD ADJUSTER GEARBOX INPUT SHAFT KIT VARIS PEED CONTROL (HEADER) KIT NUT-0 0 BRG HSS 0 9 WSH-000 KIT 00 NUTA 0 BRG RCL 00 VARISPEED CONTROL(PRE 00) SPACER PLAIN NUT BEARING TIE ROD PLATE SET SCREW WAS H ER PTO END GUARD PLAIN NUT BEARING LOCATING BAR R CLIP (00 (00 ON) ON) SCW 0 BUT SK SCREW(00&ON) 99 0 IDLER MTG BRKT (00 & ON)

27 ASSY NUMBER: 99 ASSY DESCRIPTION:INPUT GEARBOX MTG SUB ASSY Cvs ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY Shelbourne Reynolds Engineering Limited GEA- 00 BLTA0 NUT-U 0 WSH 00 NUT- 0 9 M0TE BLTA0 BRG BEL WSH 00 WSH 00 NUT 0 NUT-0 BLT ] KIT 00 KIT-0 INPUT GEARBOX ASSY BOLT NUT (UPTO 009) NUT ACTUAT ADJUSTER BRACKET (UPTO 009) ADJUSTER ASSY BOLT BEARING SPACER IDLER SPACER BELT x0 (00 0) NUT NUT (00 0) COACHBOLT TIE ROD END ASSY(00 & ON) TIE ROD END ASSY(UP TO 00 TIE BAR ASSY (00 & ON) TIE BAR ASSY (UP TO 00) TIE ROD ADJUSTER GEARBOX INPUT SHAFT KIT VARI SPEED CONTROL (HEADER) j NUT HSS 0 9 WSH 000 KIT 00 NUTAO BRG CL P 000 PLAIN NUT TIE ROD PLATE SET SCREW PTO END GUARD (UP TO 009) PLAIN NUT BEARING LOCATING BAR R-CLIP SCW 0 BUT SK SCREW(00 0) 99 0 IDLER MTG BRKT (00 0)

28 ASSY NUMBER: 99 ASSY DESCRIPTION:NPUT GEARBOX MTG SUB ASSY ITEM PART NO DESCRIPTION QTYIT EM PART NO DESCRIPTION QTY Shelbourne Reynolds Engineering Limited GEA-00 BLTAO NUT-00 WSH 00 NUT-09 MOTE BEL WSH 00 NUT- 0 BLT KIT 00 KIT NUT -00 INPUT GEARBOX ASSY BOLT NUT NUT ACTUAT ADJUSTER BRACKET ADJUSTER ASSY BELT NUT COACH BOLT TIE ROD END ASSY TIE BAR ASSY TIE ROD ADJUSTER GEARBOX INPUT SHAFT KIT VARI SPEED CONTROL(HEADER) PLAIN NUT 90 0 TIE ROD PLATE HSS 0 9 SET SCREW I KIT 00 KIT 00 NUTA 0 BRG RCL BRG 00 CIR SCW BSHHO NIP 0000 PTO PLAIN NUT BEARING LOCATING BAR R-CLIP BEARING INTERNAL CIRCLIP SLIDING HUB IDLER SPINDLE GREASE NIPPLE END GUARD PTO END GUARD VEE PULLEY IDLER GRUB SCREW BUSH

29 DTEMS 9 & 0 USED ON Cvs Cvs &ON 99 PARTS IN FEINT TEXT USE WITH mm BEARING

30 QTY Shelbourne Reynolds Engineering Limited ASSY NUMBER: 99 0 ASSY L)ESCRIPTION:DIVIDER SUB ASSY IT EM PART NO DESCRI PT ION QTY ITEM PART NO DESCRI PT ion HSS O 9 WSH 00 WSH 00 DIVIDER ASSY LH DIVIDER ASSY RH SETSCREW L

31 .O 9L.9

32 ASSY NUMBER: 90 0 ASSY DESCRIPTION: EMBLEMS AND GUARDS SUB Cvs( UPTO 00) ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY Shelbourne Reynolds Engineering Limited HSS 00 WSH-00 WSH HSS 00 WSH-00 NUT SCW-0 WSH-0 WSH-0009 NUT-00 HSS HSS-0 9 WSH-00 NUT-0 BLTAOO B PG BLTAOO WDA 000 RCL POP FRONT L.H. GUARD(00 ON) FRONT L.H. GUARD(TO 00) SET SCREW SPRING PENNY LH SIDE GUARD(LATE 00 ON) LH SIDE GUARD(EARLY 00) LH SIDE GUARD(UP TO 00) L.H. REAR GUARD(00 ON) L.H. REAR GUARD(00 ONLY) L.H. REAR GUARD(UP TO 00) L.H. TOP GUARD SET SCREW SPRING NYLOC NUT COVER THUMB SCREW PENNY PLAIN NYIJOC NUT SET SCREW LH REAR BACK PLATE ASSY SET SCREW PLAIN NYLOC NUT SHEARBOLT BODY PLUG R.I-I. GUARD ASSY BOLT STAY ROD (00 ON) STAY ROD (UPTO 00) CANNISTER BRACKET CANNISTER R CLIP (UP TO 00) IDENTIFICATION PLATE POP RIVET EMBLEM (STRIPES & SRE) I 0 I I I TNE 00 0 TN F TNF HSS 0 BLTFO CHN-0 CHN-0 RCL W S H HND NUT- 0 LTC-000 L T C 00 LTC-0000 EMBLEM (READ MANUAL) EMBLEM (GREASE 0 HOURS) EMBLEM (FLYING OBJECTS) EMBLEM (TENSILOCK) EMBLEM (SLING POINT) EMBLEM (SHEARBOLT PART No.) EMBLEM (/ TURN) (PRE 00) EMBLEM (STOP ENG BEFE...) EMBLEM (STOP ENG BEFE...) I EMBLEM (DONT HANG CHAIN) (PTO GUARD) (AUGER ROT SPEED) EMBLEM (ENGAGE STRIP ROT) EMBLEM (GREASE 0 HOURS) SET SCREW COACH BOLT CHAIN 0. CHAIN (00 ON) 0. RCLIP REAR GUARD HINGE ASSY FRONT GUARD HINGE ASSY HINGE PLAIN TIE ROD SUPP. (MID 00 & ON) TIE ROD SUPP. (00 MID 00) TIE ROD SUPP. (UP TO 00) I PLASTIC HANDLE(00 ON) SPACER(0. LG LATER 00) SPACER(. LG EARLY 00) NYLOC NUT TURN FASTENER(00 ONLY) I RETAINING (00 ONLY) SLAM LATCH(UP TO 00)

33 ASSY NUMBER: 90 0 ASSY DESCRIPTION: EMBLEMS AND GUARDS SUB Cvs( UP TO 00) ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY Shelbourne Reynolds Engineering Limited PIN 090 LYNCH PIN(00 ON) I 9 0 LATCH PLATE (00 ON) I 90 0 STAY CATCH (00 ON)

34 ASSY NUMBER: 90 0 ASSY DESCRiPTION: EMBLEMS AND GUARDS SUB (00 ON) Shelbourne Reynolds Engineering Limited ITEM PART NO DESCRIPTION ITEM PART NO DESCRIPTION QTY HSS 00 WSH 00 WSH HSS 00 WSH 00 NUT SCW 0 WSH-0 WSH 0009 NUT-00 HS S HSS 0 9 WSH 00 NUT- 0 BLTAOO 9 0 BLTAOO WDA POP TNF-00 0 TNF-00i FRONT L.H. GUARD SET SCREW SPRING PENNY LH SIDE GUARD L.H. REAR GUARD L.H. TOP GUARD SET SCREW SPRING NYLOC NUT COVER THUMB SCREW PENNY PLAIN NYLOC NUT SET SCREW LH REAR BACK PLATE ASSY SET SCREW PLAIN NYLOC NUT SHEARBOLT R.H. GUARD ASSY BOLT LOCKING HINGE STAY ROD (UPTO MID 00) CANNISTER BRACKET CANNISTER IDENTIFICATION PLATE POP RIVET EMBLEM (STRIPES & SRE) LABEL (GREASE SYMBOL) EMBLEM (READ MANUAL) EMBLEM (GREASE 0 HOURS) EMBLEM (FLYING OBJECTS) EMBLEM (HEADER MAINTENANCE) EMBLEM (TENSILOCK) ii TNF HSS 0 BLTFO CHN-0 C RN -0 RCL WSH HND NUT- 0 PIN EMBLEM (SLING POiNT) EMBLEM (SHEARBOLT PART No.) EMBLEM (STOP ENG BEFE...) EMBLEM (STOP ENG BEFE...) EMBLEM (DONT HANG CHAIN) (PTO GUARD) (AUGER ROT SPEED) EMBLEM (ENGAGE STRIP ROT) EMBLEM (GREASE 0 HOURS) SET SCREW COACH BOLT CHAIN CHAIN R CLIP REAR GUARD HINGE ASSY FRONT GUARD HINGE ASSY HiNGE (MID 00 & ON) HINGE (UPTO MID 00) PLAIN TIE ROD SUPP. (MID 00 & ON) TIE ROD SUPP, (UPTO MID 0) PLASTIC HANDLE SPACER NYLOC NUT LYNCH PIN LATCH PLATE STAY CATCH (UPTO MID 00)

35 ONCAMX ON TIE ROD ENS MOUNTED ON HO LA ROT BEARING LA BALL COUPLING F FRONT PULLEY NOT USED ON ADO 90 RH & LV A00 PIVOTS AND NOSE ARM PIVOTS

36 ASSY NUMBER: 90 0 ASSY DESCRIPTION: ROT MTG SUB ASSY QTY QTY Shelbourne Reynolds Engineering Limited ITEM PART NO DESCRIPTION - ITEM PART NO DESCRIPTION RH SIDE PLATE W/A BRG- BEARiNG HSS 0 SETSCREW WSH SHIM DIVISION PLATE BLTA9O BOLT NUTAOO AERO-TIGHT NUT 9 WSH-00 0 NUT-09 NUT GEA-00 ROT GEARBOX ASSY 90 0 DIVIDING PLATE RH 90 0 DIVIDING PLATE LH SCW 0 SCREW ii WSH-00 NUT 0 NUT 90 0 SPACER SHIM 9 0 SHIM I HSS 00 SETSCREW FOOT PACKER PLATE NIP-0000 GREASE NIPPLE

37 ASSY NUMBER: 90 0 ASSY DESCRIPTION: ROT MTG SUB ASSY ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY Shelbourne Reynolds Engineering Limited 99 0 RH SIDE PLATE W/A BRG- BEARING HSS 0 SETSCREW WSH SHIM DIVISION PLATE BLTA9O BOLT NUTAOO AERO-TIGHT NUT 9 WSH-00 0 NUT-09 NUT KIT 00] PULLEY ASSY (00,00 &ON) CONSULT SHELBOURNE REYNOLDS KIT 00 PULLEY ASSY (00 & 00) CONSULT SHELBOURNE REYNOLDS KIT 00 PULLEY ASSY (UP TO 00) 90 0 DIVIDING PLATE RH 90 0 DIVIDING PLATE LH SCW 0 SCREW WSH-00 NUT-0 NUT SHIM 9 0 SHIM HSS-00 SETSCREW 90 0 DRIVE SHAFT W/A (009 & ON) DRIVE SHAFT W/A (UPTO 009) HSSGOO SET SCREW 99 0 BEARING SUPPT BRG-0 BEARING 9 HSS-0 SETSCREW 0 WSH-00 NUT-0 NUT 9 0 FOOT PACKER PLATE ç 0 R N I P 000 NIP HSS 0 WSH SPACER (00 & ON) (mm) SPACER(00 & 00) (mm) SPACER(UP TO 00) (llmm) GREASE NIPPLE GREASE NIPPLE RETAINING STUB (00 & ON) SETSCREW(UP TO 00) SPRING (UP TO 00) SPACER (00 00) ONLY REQUIRED IF ITEM IS 909 0

38 nrnv Shelbourne Reynolds Engineering Limited ASSY NUMBER: 90 0 ASSY DESCRIPTEON: ROT MTG SUB ASSY ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTI ON RH SIDE PLATE W/A BRG- BEARING HSS 0 SETSCREW WSH-00 0 SHIM 0 DIVISION PLATE BLTA9Q BOLT NUTAOO AERO TIGHT NUT WSH-00 NUT-09 NUT PULLEY ASSY 0 DIVIDING PLATE RH 0 DIVIDING PLATE LB SCW 0 SCREW WSH-00 NUT 0 NUT KIT HSS-00 0 SHIM 0 SHIM SETSCREW 0 DRIVE SHAFT W/A HSSGOO I SET SCREW BEARING SUPPT I BRG-0 BEARING SETSCREW WSH 00 NUT-0 NUT 0 FOOT PACKER PLATE 0 SPACER II NIP 000 GREASE NIPPLE NIP 0000 GREASE NIPPLE HSS I 9 0 Al 0 WSH RETAINING STUB SPRLNG SPACER

39 90

40

41 Shelbourne Reynolds Engineering Limited ASSY NUMBER: ITEM 9 0 a PART NO WSH 000 HSS POP COO HSS 0 9 WSH 00 NUT RN S KO HSSA 99 NUT-C 90 BSH 00 WSH dr usc NIP 00 WSH 00 PIN HSS 0 NUT 0 9 HS SAC 90 NUT WSH-00C9 90 DESCRIPTION QTY ITEM MAIN FRAME (00 & ON) NUT O0 Cvs MAIN FRAME(UPTO 00) 9 0 SKID 9 0 SKID ADJUSTER PLATE LH SKID ADJUSTER PLATE RH WSH-00 ]. HSS-0 SET SCREW 9 0 RUBBER SEAL 9 0 CLAMP STRIP HSS-00 POP RIVET WSH 00 TOP SIDE PLATE LH NUT-0 TOP SIDE PLATE RH 9 0 SET SCREW 9 0 PLAIN 0 9 BLTAO NYIJOC NUT HYDRAULIC RAM NUT-00 RAM SEAL KIT LOCKING ASSY 9 0 SET SCREW 99 0 PLAIN NUT 0 SCW-9O BUSH 9 0 PLAIN 9 0 CIRCLIP SCW- LIFT ARM LH (00 ON) LIFT ARM LH (PRE 00) 0 HSS 00 LIFT ARM RH (00 ON) WSH-O0 LIFT ARM RH (PRE 00) 9 0 GREASE NIPPLE HSS-09 PLAIN 9 0 SPLIT PIN 90 0 LINK ARM SET SCHEOO NYLOC NUT HSS-0 SETSCREW 9 0 NUT 9 WSH00 NOSE HEIGHT NDCAT POD II 0 PLAIN WASHEP 9 kd 0 ASSY DESCRIPTION: FRAME & PARTS SUB Cvs/RvsH PART NO DESCRI PT TON rmv NUT LIGHT BRACKET LH LIGHT BRACKET RH NOSE STOP LATCH SPRING SET SCREW HEADER STAND BRACKET HEADER FRONT STAND SET SCREW PLAIN NYLOC NUT RETAINING NUT RETAINING SCREW BOLT RETAINING BAR PLAIN RUBBER SEAL SEAL CLAMP SEAL CLAMP LONG BUTT SCK HD SCREW RUNNER ASSY LH RUNNER ASSY RH CSK SOC HD SCREW ROT DEFLECT SET SCREW SPRING STRAP SET SCREW ST STAGE SPILL PLATE.mt RADIUS MOULDING.mf SELF DRILLING SCREW SET SCREW SPILL PLATE (PRE 00) SPRING FK STOP PLATE LB I 0 0

42 r m v Shelbourne Reynolds Engineering Limited ASSY NUMBER: 90. CONTINUED ASSY DESCRIPTION: FRAME & PARTS SUB Cvs/Rvs ITEM DART NO DESCRI PT ION PART NO DESCRIPTION SH ISH 00 SH 00 9] SH [SS 00 [SS 009 ISH 0 UT00 PLAIN FK STOP PLATE RH PLAIN SPRING BACKING PLATE COVER PLATE PENNY RD STAGE SPILL PLATE.mt (All Cvs HEADS) (Rvs HEADS UP TO 00 ONLY) RD STAGE SPILL PLATE l.mt (Rvs HEADS 00 ONLY) SPILL PLATE ASSY.mt (Rvs HEADS 00 & ON) R0 STAGE SPILL PLATE.mt (All Cvs HEADS) (Rvs HEADS UP TO 00 ONLY) -ISE SHOE PLATE PLATE SETSCREW SETSCREW PENNY JUTSERT

43 ASSY NUMBER: 90 ASSY DESCRIPTION: FRAME & PARTS SUB Rsd 0 0 Shelbourne Reynolds Engineering Limited IT EM PART NO DESCRIPTION QTY IT EM PART NO DESCRI PT ION QTY 9 0 a WSR 000 HSS POP HSS 0 9 WSH 00 NUT RMSKO HSSA 99 NUT-0 90 BSH 00 WSR CIR NIP 00 WSH 00 PIN HSS 0 NUT-09 HSSAO9O NUT WSH 0009 NUT- 0 0 Rsd MAIN FRAME ASSY SKID SKID ADJUSTER PLATE LH SKID ADJUSTER PLATE RH SET SCREW RUBBER SEAL CLAMP STRIP POP RIVET TOP SIDE PLATE LR TOP SIDE PLATE RH SET SCREW PLAIN NYLOC NUT HYDRAULIC RAM RAM SEAL KIT LOCKING ASSY SET SCREW PLAIN NUT BUSH PLAIN CIRCLIP LIFT ARM LH LIFT ARM RH GREASE NiPPLE PLAIN SPLIT PIN LINK ARM SET NYLOC NUT SETSCREW NUT NOSE HEIGHT INDICAT ROD PLAIN NUT I WSH 00 HSS HSS 00 WSH 00 NUT BLTA NUT SCW S CW 9 0 HSS 00 WSH SET SCREW WSH WSH 00 LIGHT BRACKET LH LIGHT BRACKET RH NOSE STOP LATCH SPRING SET SCREW HEADER STAND BRACKET HEADER FRONT STAND SET SCREW PLAIN NYLOC NUT RETAINING NUT RETAINING SCREW BOLT RETAINING BAR PLAIN RUBBER SEAL SEAL CLAMP SEAL CLAMP LONG BUTT SCK RD SCREW RUNNER ASSY LH RUNNER ASSY RH CSK SOC HD SCREW ROT DEFLECT SET SCREW SPRING STRAP SET SCREW SET SCREW SPRING FK STOP PLATE LH PLAIN

44 ASSY NUMBER: 90 CONTINUED ASSY DESCRIPTION: FRAME & PARTS SUB Rsd ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY Shelbourne Reynolds Engineering Limited WSH--00 WSH WSH HSS 00 HSS 009 WSH 0 WA S H ER FK STOP PLATE RH PLAIN SPRING BACKING PLATE COVER PLATE PENNY SPILL PLATE ASSY. mt (00 & ON) R0 STAGE SPILL PLATE l.mt (UP TO & INCLUSIVE 00) RD STAGE SPILL PLATE.rnt (UP TO & INCLUSIVE 00) HSE SHOE PLATE PLATE SETSCREW SETSCREW(UPTO 00) PENNY (UPTO00)

45 (0 0 ca) 0 r ) 0 0 z

46 QTY Shelbourne Reynolds Engineering Limited ASSY NUMBER: 90 0 ASSY DESCRIPnION: RVS DIVIDERS ITEM PART NO DESCRI PTION HSS 0 9 WSH 00 WSH WSH 00 BLTA HSS SPGC0 WSH 00 PIN HEAD DIVIDER FIXING LH I HEAD DIVIDER FIXiNG RH I SET SCREW DIVIDER ARM ASSY LH DIVIDER ARM ASSY RH BOSS SET SCREW FRONT DIVIDER ASSY LH FRONT DIVIDER ASSY RH CLAMPING CHANNEL SET SCREW HANDLE SPRING ROLL PIN QT Y ITEM PART NO DESCRIPTION

47 0[9L

48 ASSY(00 ON) QTY Shelbourne Reynolds Engineering Limited ASSY NUMBER: 9 0 ASSY DESCRIPTION: DIVIDER SUB ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION HSS HSS 0 NUT PIN 090 DIVIDER FIXINC W/A DIVIDER PIXING W/A SETSCREW BOSS SETSCREW NYLOC NUT RH LH LYNCH DIVIDER W/A DIVIDER W/A PIN & CHAIN LR RH

49 9 0

50 Shelbourne Reynolds Engineering Limited ASSY NUMBER: 9 0 ASSY DESCPIPTION:STRPPING ROT ASSY (L/H).m ITEM PART NO DESCRI PT ION QT Y IT EM PART NO DESCRIPTION QTY OUTER HUB CASTING L.H OUTER HUB CASTING R.H INNER HUB CASTING 9 0 ROT SECTION.M ( ROT SECTION.M (UP TO & & ON ONLY) INCLUDING 00) 9 0 ROT SECTION.M (UP TO HSSGOO SET SCREW & INCLUDING 00) 9 0 STANDARD ELEMENT 9 0 END HOLE ELEMENT 9 0 CENTRE END HOLE ELEMENT 9 0 SEED SAVER CTR (PROFILED EDGE) 90 0 SEED SAVER CTR (STRAIGHT EDGE) 99 0 SEED SAVER LH END (PROFILED EDGE) 9 0 SEED SAVER LH END (STRAIGHT EDGE) 9 0 SEED SAVER LH CTR (PROFILED EDGE) 9 0 SEED SAVER LH CTR (STRAIGHT EDGE) CTR FINGER LH HSSFO SET SCREW 99 0 ANTI WRAP PLATE WSH-0 PENNY SCW 0 SELF TAP.SCREW 90 0 CENTRE SHAFT W/A 9 0 ROT DRIVE DISC W/A OUTER CLAMP RING BPG-0000 BODY PLUG (UP TO 9 0 BALANCE WEIGHT 9 0 BALANCE WEIGHT 9 0 BALANCE WEIGHT E-9-0 TTh Fm Fm /Th & flfl ifl INCLUDING 00) Fm Fm C p p NOTE. ITEMS 0, BOTH TYPF INTERCHAI REASONS ROT FI NOTE. ITEMS PARTS WH] FLANGES t SEE RH R( FLANGES AND. S OF SEED SAVER ARE GEABLE BUT F BALANCE F MIXING TYPES ON A AS OPPOSITE PAIRS. AND ARE CRECT N FINGERS SET WITH P IE AGGRESSIVE. T ASSY PARTS WHEN RE REQUIRED DOWN.

51 Om LH ROT LLUSTRATED Z 9 ATTED ONLY 9 ifj i//f SEED SAVER FINGERS PRLED EDGE STRAIGHT EDGE FflTED AS SHOWN FTED TO 9 0 RH ROT

52 ASSY NUMBER: 9 ASSY DESCRIPTION: AUER ASSY SPIRAL PADDLE ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY Shelbourne Reynolds Engineering Limited HSSFO BRG-00 BRG-00 HSS 0 9 WSH 00 WSH SCBAO WSH 00 WSH WSH 00 NUT-0 NUT AUGER WELD ASSY. AUGER DRIVE SHAFT SET SCREW BEARING BEARING SET SCREW PLAIN SPRING AUGER SHAFT INSPECTION COVER BUT. SCKT HD SCREW SPRING SPRING AUGER PADDLE FLIGHT EXT.LH AUGER PADDLE FLIGHT EXT.RH PLAIN NYLOC NUT NYLOC NUT SPIRAL PADDLE LH SPIRAL PADDLE RH

53 (0 0) I.) C) /

54

55 Shelbourne Reynolds Engineering Limited ASSY NUMBER: GEA-00 ASSY DESCRIPTION: INPUT (Cvs) GEAR DROPBOXASSY ITEM PART NO DESCRIPTION QTY ITEM EART NC) DESCRIPTION QTY BLT- BLTA00 BLTA00 BLTA0 B L TA 0 WSH-00 NUT-09 SCW 99 0 FIT 0 BRG 00 FITD0000 FIT REF. PIN SCW 0 9 WSH 00 BRG SEA OS 90 SEA OS 90 K00O REF HSSFO 99 0 CASE HALF (PTO SIDE) (MID 00&ON No CAST ON PT. CASE HALF(PTO SIDE) (UPTO MID 00, No CAST ON PT.> CASE HALF (PULLEY SIDE) (MID 00&ON No CAST ON PT. CASE HALF(PULLEY SIDE) (UPTO MID 00 No CAST ON PT.) DOWEL BOLT BOLT (00 & ON) BOLT (UP TO 00) BOLT (00 & ON) BOLT (UP TO 00 PLAIN NYLOC NUT GRUBSCREW JACKING ROD PLUG BEARING SIGHT GLASS/SEAL BREATHER INPUT SHAFT GEAR (SEE DRIVE KIT) DOWEL CAP HEAD SCREW SPRING BEARING RING SHAFT SEAL(INSET SHAFT) SHAFT SEAL(PROTRUDING SHAFT KEY SPACER SPACER SPROCKET (SEE DRIVE KIT) RETAINING HEX ND SCREW PINION SHAFT I -ì REF HSS O 0 WSH 00 WSHA00 WS H 00 NUT- 0 NUT O NUT BRG SCW O SCW O 0 WSH SCEAO SCEAO SCEA09 NP OO 00 SCW- A900S SCCAO - H SN -00 NUT -0 PINION (SEE DRIVE KIT) SLEEVE- (INSET SHAFT) F USE WITH SEAL ITEM SLEEVE- (PROTRUDING SHAFT) F USE WITH SEAL ITEM ACTUAT CAM ASSY ACTUAT ARM PIVOT PLATE LH ACTUAT ARM PIVOT PLATE RH SET SCREW USE WITH SCEAO AND ITEM USE WITH SCEA0 PLAIN (PRE 00) NYLOC NUT USE WITH SCEAO AND ITEM PLAIN NUT USE WITH SCEAO NYLOC NUT (UPTO 00) STATIC CAM BEARING STATIC CAM ARM ASSY SCREW (00 & ON) SCREW (UPTO 00) SPRING INNER PULLEY( BOLT FIXING) INNER PULLEY( BOLT FIXING) INNER PULLEY HUB( BOLT) INNER PULLEY HUB( BOLT) SCREW(Mx0 CSK SOCKET) SCREW(Mx CSK SOCKET) SCREW(Mx CSK SOCKET) GREASE NIPPLE GRUB SCREW 0 RING OUTER PULLEY OUTER PULLEY HUB CAP HEAD SCREW PLAIN NYLOC NUT

56 QTY Shelbourne Reynolds Engineering Limited ASSY NUMBER: GEA-00 (CONT) ASSY DESCRIPTION: INPUT (Cvs) GEAR DROPBCX ASSY ITEM PART NO DESCRI PT ION QTY ITEM PART NO DESCRI PT ION Cl SCW WSH 000 HSS WSH 00 HSS SEAZO 9000 KEY CAP HEAD SCREW SPRING SET SCREW O RING CAP SPRING SET SCREW SPACER (00 SPACER(PRE 00) SPACER(00 & & ON) ON) SPACER(PRE 00) PLUG SEAL-(NSET SHAFT) INPLACE OF ITEM CAM ARM SPACER (00 & ON) 9 0 0

57 GEAR ION DROPBOXASSY QTY -J Shelbourne Reynolds Engineering Limited ASSY NUMBER: GEA-00 ASSY DESCRIPTION: INPUC (Cvs) ITEM PART NO DESCRIPTiON OQIY ITEM PART NO DESCRI PT E BLT- BLTA00 BLTAO WSH 00 NUT- 0 9 SCW FIT 0 BRG 00 FITD0000 FIT REF. PIN SCW 09 WSH 00 BRG SEA OS 90 K REF HSSF REF CASE HALF (PlO SIDE) (MID 00&ON No CAST CASE HALF(PTO SIDE) (UPTO MID 00, ON No CAST ON CASE HALF (PULLEY SIDE) (MID 00&ON No CAST CASE HALF(PULLEY SIDE) 00 (UPTO MID DOWEL BOLT BOLT BOLT NYLOC NUT GRUBS CREW ROD PLUG PLAIN JACKING BEARING SIGHT GLASS/SEAL BREATHER ON No CAST ON INPUT SHAFT (SEE DRIVE KIT) GEAR DOWEL HEAD SCREW CAP SPRING BEARING RING SHAFT SEAL KEY SPACER SPACER SPROCKET (SEE DRIVE KIT) HEX RD SCREW RETAINING PINION SHAFT PINION (SEE DRIVE KIT) SLEEVE ACTUAT CAM ASSY PT. PT.) PT. PT.) -K OP SO HSS O 0 WSH 00 WSHA00 WSH 0O NUT- 0 NUT O NUT 0 0. BRG SCW O SCW O 0 WSH SCEAO SCEAO SCEAO 9 NIP 000 NP-OO 00 SCW O RA SCCATO WSH OOS NUT- 0 i9q SCW Zi9 ACTUAT ARM LH ACTUAT ARM RH SCREW USE AND USE NYLOC NUT AND NUT NYLOC NUT CAM CAM ARM SCREW & ON) SCREW BOLT BOLT SCREW BOLT BOLT BOLT & ON) SET PLAIN PLAIN STATIC BEARING STATIC SPRING ITEM ITEM (00 PIVOT PLATE PIVOT PLATE WITH SCEAOS WITH SCEA0 (PRE 00) USE WITH SCEA0 USE WITH SCEA0 (PRE 00) (PRE 00) ASSY FIXING) FIXING) INNER PULLEY( INNER PULLEY( INNER PULLEY HUB( BOLT) INNER PULLEY HUB( BOLT) (MxOCSK) ( SCREW(MxCSK) ( SCREW( GREASE NIPPLE (009 GREASE NIPPLE (PRE 009) FIX) FIX) FIX) GRUB SCREW OUTER OUTER HUB CAP HEAD SCREW NYLOC NUT KEY CAP HEAD SCREW O RING PLAIN PULLEY PULLEY

58 GEAR DROPBOX ASSY QTY Shelbourne Reynolds Engineering Limited ASSY NUMBER: GEA-00 (CONT) ASSY DESCRIPTION: INPUT (Cvs) ITEM PART NO DESCRIPTION OQTY ITEM PART NO DESCRIPTION WSH 000 HSS WSH 00 RSS SEA Z BRG 00 WAS HER SCREW SPRING SET 0 RING SPRING SET SPACER PLUG CAM ARM CAP SCREW SEAL SPACER (00 BEARING (MID 00) (INSTEAD OF x ITEM 0) & ON)

59 GEA IND OE ØØ ONLY 00 /00 /00 OEOØ OE Ø/

60 ASSY (Rvs/Cvs MODEL) Shelbourne Reynolds Engineering Limited ASSY NUMBER: GEA-00 ASSY DESCRIPTION: ROT GEARBOX ITEM PART NO DESCRIPTION * _ QTY ITEM PART NO DESCRIPTION QTY : SCW 0 9 WSH SCW 0 BRG 00 CIRO009O ERG BRG 90 BRG 90 0 SEABO 00 BRG BRG WSH 00 SCW 00 WSHA 00 FIT 0 HMA-00 WSH RA 00 0 HSS 0 NIP-000 WSH 00 WSH 00 BRG- 0 & ON) TO BODY CAP HEAD SCREW CASE (00 CASE (UP SHAKEPROOF 00) RING GEAR/SHAFT (00 GEAR TO TO TO CAP HEAD SCREW TO RING (UP OUTPUT SHAFT (UP FIXING DISC (UP (UP BEARING 00) INTERNAL CIRCLIP BEARING SLEEVE LOCK NUT LOCKING SHAFT SEAL BEARING PINION BEARING SEAL HOUSING DOWTY CAP HEAD SCREW PLUG HYD ADAPT DOWTY PLUG SHEAVE SHEAVE CAM FOLLOWER BRACKET SHAKEPROOF DRAIN INNER PULLEY OUTER PULLEY 0 RING SET SCREW GREASE NIPPLE CAM FOLLOWER PLAIN SPRING EXT. (00 & ON) 00) 00) 00) & ON) 0 I -i a 9 WSH 00 WS H 00 SPGC000 S PGC HSS HSS 00 FITD HSS 00 FIT 00 HFAKO9O CLP 009 CLP 00 CLP 00 HOSI000 HOSI FIL H SS 0 9 NUT-0 WSH 00 NIP NIP-000i SPRING SPRING(00 SPRING(UP SLEEVE CARRIAGE CAM CAM SCREW TAB SET & ON) TO 00) ON) RETAINING SPIGGOT(00 RETAINING SPIGGOT(UPTO 00) SETSCREW GUAGE TO LEVEL SPACER (UP SETSCREW HYD HOSE HYD HOSE HOSE TAIL SWIVEL TAIL CLIP CLIP JUBILEE CLIP PETROL PETROL HOSE HOSE OIL FILLER ASSY FILLER FOAM CAP DISC SETSCREW NYLOC NUT DOWTY 00) NEEDLE POINT GREASE ADAPT. GREASE NIPPLE

61 (I KT O KIT Ol 0 GEA-00 NOTE LOCTITE ON ITEM

62

63 ASSY NUMBER: KIT-009 DESCRIPTION: AUGER DRV SPRKT/ SPRG CLUTCH ASS RVS/ ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY Shelbourne Reynolds Engineering Limited 90 0 SPROCKET ASSY SOT BSHAOOO BUSH THRUST 9 0 CLUTCH HUB 00 CLUTCH PLATE 99 0 DRIVE DISC 0 0 SPACER 0 SPRING LOCKING RING BLT-0 BOLT WSH-00 PLAIN NUT-00 NUT

64 Shelbourne Reynolds Engineering Limited ASSY NUMBER: KIT-00 ITEM PART NO DESCRIPTION DESCRIPTION: AUGER DRV SPRKT/ SPRG SPLINEC ClUTCH ASS QTY ITEM PART NO DESCRiPTION QTY BSHAOOO BLT-0 WSH 00 NUT-00 SPROCKET ASSY SOT BUSH THRUST CLUTCH HUB CLUTCH PLATE DRIVE DISC SPACER SPRING LOCKING RING BOLT PLAIN NUT I

65 KT KT - 00

66 ASSY NUMBER: KIT-00 ASSY DESCRIPTION: GEARBOX INPUT SHAFT SUB CVS ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION [QTY Shelbourne Reynolds Engineering Limited PTO SCW HSS NUT-00 BRG WSH 0 0 WSH 00 NUT- 0 9 HSS 0 HSS HSS 00 WSH 0009 NUT- 0 0 WSH 00 SCW 0 WSH 0 HSS 00 WSH 0 NUT- 0 PTO COUPLING INPUT SHAFT FIXING RING (UPTO 00) GRUB SCREW (UPTO 00) PTO HALF GUARD (UPTO 00) SET SCREW (UPTO 00) GUARD SUPPT PLT (UPTO 00) NUT (UPTO 00) BEARING BEARING MOUNTING PLATE (00 & ON) (UPTO 00) NYLOC NUT SETSCREW (00 & ON) SETSCREW (UPTO 00) PTO GUARD (00 & ON) COVER (00 & ON) SET SCREW (00 & ON) PLAIN (00 & ON) NYLOC NUT (00 & ON) SPRING (00&ON) THUMB SCREW (00 & ON) PENNY (00& ON) SETSCREW (00 & ON) PENNY (00 & ON) NYLOC NUT (00 & ON) I

67 00 NO ONWRDS UP O 00 KT OO KT OO

68 Shelbourne Reynolds Engineering Limited ASSY NUMBER: KIT-00 ASSY DESCRIPTION: PTO END GUARD ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRI PTION QTY SOW S 0 WSH GUARD TUBE GUARD SECURING BRACKET SCREW PTO BRACKET

69 cd Q cii N) cii

70 Shelbourne Reynolds Engineering Limited ASSY NUMBER: KIT-00 ASSY DESCRIPTION: PTO END GUARD ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY HS S 00 WSH 00 WSH S CW SET SCREW SPRING ELAT GUARD SECURING BRACKET SCREW GUARD TUBE

71 KIT 00 / / / / / /

72

73 Shelbourne Reynolds Engineering Limited ASSY NUMBER: KIT-009 SUB ASSY [)ESCRIPTION: BALL JOINT COUPLING ITEM PART NO DESCRIPTION QTY LTEM PART NO DESCRIPTION QTY SCW HSS 0 9 WSH 00 NUT-O NIP-0000 SPLINED BALL GRUB SCREW DRIVE RING PLATE SETSCREW NUT GREASE TUBE GREASE TUBE ADAPT GREASE NIPPLE

74 Shelbourne Reynolds Engineering Limited ASSY NUMBER: KIT -009 ITEM PART NO DESCRIPTION SUB ASSY DESCRIPTION: BALL JOINT COUPLiNG QTY ITEM PAST NO DESCRI PT ION QTY SCW HSS 0 9 WSH 00 NUT NIP 0000 BALL COUPLING ASSEMBLY GRUB SCREW DRIVE RING PLT(C/RVS Mcs) DRIVE RING PLT(RX VS Mcs) SETSCREW NUT GREASE TUBE GREASE TUBE ADAPT GREASE NIPPLE I J

75 KITOO9 & KIT = ) 009 NOTE ENSURE GREASE TUBE (ITEM ) & GRUB SCREW (ITEM ) ARE ASSEMBLED INTO CAST HOUSING (ITEM THE IENTATION SHOWN IS F A R.H. ROT OPPOSITE IENTATION F LH. ROT.

76 Shelbourne Reynolds Engineering Limited ASSY NUMBER: KIT-0 SUB ASSY DESCRIPTION:VARI SPEED CONTROl KLT(HEADER) ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY LOOM&PLUG ASSY REF ONLY MOTE00 PLUG&TERMINALS

77 \ / \ ---- KIT - 0

78 Shelbourne Reynolds Engineering Limited ASSY NUMBER: KIT-0 SUB ASSY DESCRPTION:VARI SPEED CQNTROLLER(COMBINE) ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY 90 0 SUPPLY LOOM 90 0 POWER FEED LOOM SWT 0000 SWITCH 90 0 CONTROL BOX 9 0 EMBLEM FUS 000 FUSE 9 0 SCW-0 SELF TAP SCREW

79 -I F )

80 Shelbourne Reynolds Engineering Limited ASSEMBLY NO: KIT-09 ASSEMBLY DESCRIPTION: BELLY/WEAR PLATE KIT ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY 9 0 BELLY PAN I 9 0 BELLY PAN 9 0 SKID WEAR PLATE 9 0 FIXING PLATE 9 0 FIXING PLATE SCW 0 SCREW BLT-00 COACH BOLT WSH-00 9 NUT-0 NUT 0 HSS 09 BOLT 909 WSH V STRIP NUT 0 NUT HSS-00 SET SCREW

81 C) 0) U) /

82 BELLY PAN SKID WEAR PLATE FIXING PLATE FIXING PLATE SCREW COACH BOLT NUT BOLT PLAIN V STRIP NUT SET SCREW Shelbourne Reynolds Engineering Limited ASSEMBLY NO: KIT-00 ASSEMBLY DESCRIPTION: UNIVERSAL BELLY/WEAR PLATE KiT ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY SCW 0 BLT 00 WSH 00 NUT 0 9 HSS 09 0 WSH 00 WSH NUT 0 HSS 00

83 \\ // V \ r

84

85 Shelbourne Reynolds Engineering Limited ASSY NUMBER: KIT-00 & KIT-00A & B ASSY DESCRIPTION: ROT PULLEY ASSY ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY AO 0 0 HSS 0 NIP 000 WSH-00 WSH WSH 00 *PEPER TO INNER PULLEY SHEAVE OUTER PULLEY SHEAVE CAM FOLLOWER BRACKET 0 RING SET SCREW GREASE NIPPLE PLAIN SPRING CAM FOLLOWER ASSY SPRING ILLUSTRATION GEA_00* SPGC000 SPGC000 SPGC000O HSS 0 H S S SCEAOO NIP NIP-000 SPRiNG WHITE (00,00 & ON) (FITTED IN KIT-0I0B) SPRING YELLOW (00 & 00) (FITTED IN KIT-00A) SPRING (UP TO 00) (FITTED IN KIT-00) SLEEVE CAM CARRIAGE WHITE(00,0&ON) (FITTED IN KIT-00B) CAM CARRIAGE YELLOW (FITTED IN KIT 00 & 0W CAM SET SCREW SETSCREW PULLEY SPACER HALF RING (00 & 00, FITTED in KIT 00A CSK. SOC.HEAD SCREW (00 & 00, FITTED IN KIT 00A NEEDLE POINT GREASE ADAPT. (EARDY 00 ONLY GREASE NIPPLE (EAP.LY 00 QNL) I ±

86 Shelbourne Reynolds Engineering Limited ASSY NUMBER: KIT0 ASSY DESCRIPTION: ROT PULLEY ASSY ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY A00 0 HSS 0 NIP 000 WSH 00 WSH WSH 00 INNER PULLEY SHEAVE OUTER PULLEY SHEAVE CAM FOLLOWER BRACKET O RING SET SCREW GREASE NIPPLE PLAIN SPRING CAM FOLLOWER ASSY SPRING SPGC000 SPRING HSSAO 0 HSS 00 SLEEVE CAM CARRIAGE CAM SET SCREW SETSCREW 9 0 PULLEY SPACER HALE RING SCEAOO CSK.SOC.HEAD SCREW

87 NOTE LOCTITE THREOO ON ITEM KT O KT OO GEA-00

88 Shelbourne Reynolds Engineering Limited ASSY NUMBER: RDS 000/RDS 000&RDS-000 ASSY DESCRIPTION: TACHO KIT 00 ONWARDS ITEM PART NO DESCRIPTION ITEM PART NO DESCRIPIION QTY RDS 000 RDS 00 RDS 00 RDS 00 RDS 00 PU S 00 RDS 00 TACHO HEAD COMPLETE TACHO HEAD PLUG & ARMS HARTING CONNECT & STICKER AUDIBLE ALARM, FIXING BRACKET & SELF TAP.SCREWS POWER CONNECTION LEAD FUSE COMBINE LEAD a RDS 00 a RDS 000 RDS 00 RDS 00 RDS-009 RDS 000 FUS 000 MAGNET CARRIER, SET SCREW, PENNY & SPRING ROT SENS BRACKET TACHO HEAD COMPLETE TACHO HEAD PIXARM KIT CONNECT LEAD JUNCTION BOX/COMBINE LEAD FUSE I -I- RDS 00 V V CONVERTER KIT 9 0 RDS 00 HEADER LEAD I RDS 00 SHAFT SENS RDS 009 MAGNET, TAPTITE BOLT & FIBRE

89 DOPT LEO TO SUIT OLD STYLE SYSTEM ONLY RDS 000 AUGER,, POWER BLUE ye AUGER/ROT SENS - -, - BROWN + VE ROSBBØ - JUNCTION UOER/ ROT SENS - - SENS C T U 0 T RDS 000

90

91 Kit Option CIRvs Range Shelbourne Header

92 ASSEMBLY NO: KIT-0 ASSEMBLY DESCRIPTION: CVS OPTIONAL ROLLER KIT ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY Shelbourne Reynolds Engineering Limited 9 0 ROLLER ADJUSTER RH 9 0 ROLLER ADJUSTER LH 9 0 ROLLER 9 0 CENTRE SHAFT BRG-0 BEARING BLTALOO BOLT WSH-00 PLAIN 9 NUT-0 NYLOC NUT 0 HSS 09 BOLT WSH 00 SPRING HSS 0 BOLT WSH-00 PLAIN WSH-000 SPRING NUT-0 NYLOC NUT 99 0 LOCKING PLATE

93 )

94 ASSEMBLY NO: KIT0 ASSEMBLY DESCRIPTION: 0 FLIGHT EXTENSION KIT (HARD) ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY Shelbourne Reynolds Engineering Limited FLIGHT EXTENSION LH FLIGHT EXTENSION RH

95 KIT 0 KIT 0

96 Shelbourne Reynolds Engineering Limited SEMBLY NO: KITOi ASSEMBLY DESCRIPTION:.rnt SPILL PLATE EXTENSION KiT ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY 99 0.mt EXTENSION / HSS OO BOLT NUT-00 NUT WSH 0009

97 KIT 0 /0