Clamps - Order Today, SHIP TODAY at Metric Clamps
|
|
- Lisa Elliott
- 6 years ago
- Views:
Transcription
1 Clamps - Order Today, SHIP TOY at P
2 Clamps - Order Today, SHIP TOY at Standard Series Normal echanical Stress RP/RN/R Clamp Halves SL Slotted Screws SSL Hex Head olt IS Cap Screws S Stacking olts PK Weld Plate-Short PL Weld Plate-Long P4 P ouble Weld Plate PR Weld Plate-Strip PW Weld Plate ngled TS ounting Rail T Lock Nut P Top Plate S Locking Plate US Locking Washer Heavy Series High echanical Stress RCP/RCN/RC/RCP Clamp Halves SSC Hex Head olts SC Stacking olts ISC Cap Screws PC Weld Plate PC ouble Weld Plate PLC Weld/Screw Plate P7 TSC ounting Rail TC Lock Nut PC Top Plate PC ouble Top Plate SPC Locking Plate USC Locking Washer Twin Series Normal echanical Stress RP/RN Clamp Halves SS Hex Head olt IS Cap Screws S Stacking olts P Weld Plate PR Strip Weld Plate TS ounting Rail P10 T Lock Nut P10 S Locking Plate P10 P Top Plate US Locking Washer P2 Tube Fittings ivision
3 Clamps - Order Today, SHIP TOY at The Parker etric Clamp system is designed for restraining tube, pipe and hose assemblies against unwanted, and potentially harmful effects of mechanical shock and vibration forces that are common in fluid power systems. The clamping system is the most commonly overlooked aspect of fluid power system design. Failure to properly restrain the fluid conducting system can result in leakage, downtime and system malfunction, as well as significantly reduced life of tube, pipe and hose assemblies. With the Parker etric Clamp system, the risk of problems resulting from mechanical shock and vibration can be significantly reduced. Fig. P1 Weld Plate ssembly Fig. P2 ounting Rail ssembly How Work The etric Clamp system has two primary methods for mounting: weld plates and mounting rails. Clamps may be mounted to secure a single layer of tube or stacked for securing multiple layers. Clamps should be mounted to a rigid structure for optimum performance. Clamping tube, pipe or hose assemblies together without mounting them to a rigid structure, often called floating clamps, does not provide adequate support. Proper design of a clamping system requires that the clamps be positioned appropriately on the tube, pipe or hose assemblies. See the ssembly and Installation section of the catalog for more information on clamp location and spacing. Weld Plate ounting (Fig. P1) The weld plate mounting system allows the user to attach a single clamp assembly to a structure of similar material (steel to steel, etc) by welding the components together. Once the weld plate is attached to a structure, one clamp half can be placed onto the weld plate, followed by the tube, pipe or hose assembly. Next, the second plastic clamp half can be placed on the tube, pipe or hose assembly, followed by the cover plate. To complete the assembly, the Hex Head attachment bolts are inserted into the assembly and tightened. ounting Rail ounting (Fig. P2) Use of a mounting rail is another way to assemble the clamping system components onto a support structure. Using a mounting rail allows multiple clamps to be mounted side-by-side for restraining a group of tube, pipe, or hose assemblies. The mounting rail also provides the ability to move the location of the clamps in one direction for easier alignment. The rail can be attached to a support structure by welding or bolting. Once the mounting rail is in place, rail nuts can be slid into the rail. The first clamp half, followed by the tube, pipe or hose assembly, can then be installed over the corresponding rail nuts. fter this, the second clamp half, the cover plate and the hex head attachment bolts can be installed to complete the assembly. Stacking (Fig. P3) primary feature of the etric Clamp system is its ability to accommodate stacking of a series of clamps to various heights, thus requiring a smaller footprint for mounting. To do this, simply use the stacking bolts to mount the first clamp assembly, then install a stacking plate over the first clamp and stacking bolts. The second clamp assembly can then be placed over the first clamp assembly. Complete the mounting by assembling a cover plate and using the hex head bolts to tighten the upper clamp assembly. Note: When stacking, the clamps must be from the same series and group. Fig. P3 Stacked ssembly Reference Locations ssembly and Installation: Please refer to Section S for the assembly and installation instructions for. P3 Tube Fittings ivision
4 Clamps - Order Today, SHIP TOY at Standard Series Normal echanical Stress RP / RN / R Clamp Halves etric Tube Inch Pipe Inch Tube C E RP006X 6 RP006.4X 6.4 1/4 RP008X 8 5/16 RP009.5X 9.5 3/8 RP010X 10 1/8 RP012X RP106X 6 RP106.4X 6.4 1/4 RP108X 8 5/16 RP109.5X 9.5 3/8 R0X 10 1/8 R2X RP212.7X /2 RP213.5X /4 RP214X 14 RP215X 15 RP216X 16 5/8 RP217.2X /8 RP218X RP319X 19 3/4 RP320X 20 RP321.3X /2 RP322X 22 RP323X 23 RP325X RP426.9X /4 RP428X 28 RP430X R32X /4 R33.7X R35X 35 R38X /2 R40X 40 R42X / R44.5X /4 R45X 45 R48X /2 R50X 50 R50.8X R52X 52 R55X R57X /4 Group 0 Groups 1-6 aterial codes for clamp halves: Polypropylene - RP inside plain - RPG (for hose) Polyamide 6 - RN (Nylon) inside plain - RNG (Nylon) (for hose) luminum - R (Group 1 to 6 only) imensions and pressures for reference only, subject to change. P4 Tube Fittings ivision
5 SL Slotted Screws Clamps - Order Today, SHIP TOY at Standard Series Normal echanical Stress PK Weld Plate Short L SL0X 0,1 6 x 1 20 SL2X 2 6 x 1 25 SL3X 3 6 x 1 30 SL4X 4 6 x 1 35 SL5X 5 6 x 1 50 SL6X 6 6 x 1 60 FIT- TING E PK0X 0 30 PK1X PK2X PK3X PK4X PK5X PK6X Thickness 3 mm Group 0 Groups 1-6 SSL Hex Head olt L SSL0X 0,1 6 x 1 30 SSL2/SS1X 2 6 x 1 35 SSL3X 3 6 x 1 40 SSL4X 4 6 x 1 45 SSL5X 5 6 x 1 60 SSL6X 6 6 x 1 70 PL Weld Plate Long E F PL0X PL1X PL2X PL3X PL4X PL5X PL6X Thickness 3 mm Group 0 Groups 1-6 IS Cap Screws L IS0X 0,1 6 x 1 20 IS2X 2 6 x 1 25 IS3X 3 6 x 1 30 IS4X 4 6 x 1 35 IS5X 5 6 x 1 50 IS6X 6 6 x 1 60 P ouble Weld Plate E P0X P1X P2X P3X P4X X X Thickness 3 mm imensions and pressures for reference only, subject to change. Tube Fittings ivision
6 S Stacking olts Clamps - Order Today, SHIP TOY at Standard Series Normal echanical Stress PR Weld Plate Strip S0X 0, x 1 S2X x 1 S3X x 1 S4X x 1 S5X x 1 S6X x 1 NUER OF CLPS E PR0X PR1X PR2X PR3X PR4X PR5X PR6X Thickness 3 mm PW Weld Plate ngled P Top Plate E PW0X PW1X PW2X PW3X PW4X PW5X PW6X Thickness 3 mm Groups 1-6 P0X 0 0 P1X P2X P3X P4X X X Thickness 3 mm TS ounting Rail S Locking Plate H LENGTH (meter) TS11/1X LL 11 1 TS14/1X LL 14 1 TS30/1X LL 30 1 TS11/2X LL 11 2 TS14/2X LL 14 2 TS30/2X LL 30 2 SW SX LL T Lock Nut US Locking Washer C T/T1VERZX LL X 1 US/IS1X LL 9 18 imensions and pressures for reference only, subject to change. Tube Fittings ivision
7 Clamps - Order Today, SHIP TOY at Heavy Series High echanical Stress RCP / RCN / RC / RCP Clamp Halves etric Tube Inch Pipe Inch Tube C E F RCP108X 8 5/16 RC0X 10 1/8 RC2X 12 RC3.5X /4 RC4X RC5X 15 RC6X 16 5/8 RC7.2X /8 RC8X 18 RCP220X 20 RCP221.3X /2 RCP222X 22 RCP223X RCP225X 25 1 RCP226.9X /4 RCP228X 28 RCP330X 30 RCP332X /4 RCP333.7X RCP335X RCP338X /2 RCP340X 40 RCP342X /4 RCP438X /2 RCP440X 40 RCP442X /4 RCP445X 45 RCP448.3X /2 RCP450X RCP451X 51 2 RCP452X 52 RCP455X 55 RCP457X /4 RCP460.3X RCP463X /2 RCP465X 65 RCP470X 70 RC70X 70 RC76.1X /2 3 RC80X RC82.5X /4 RC88.9X /2 RC90X 90 RC101.6X /2 4 RC108X / RC114.3X /2 RC127X RCP7127X RCP7133X /4 RCP7140X /2 RCP7152.4X / RCP7159X /4 RCP7165.1X /2 RCP7168.3X /8 RC168.3X /8 RC177.8X RC193.7X /8 RC219.1X /8 RCP RCP (2 pairs of RCP) aterial codes for clamp halves: Polypropylene - RCP inside plain - RCPG (for hose) Polyamide 6 - RCN luminum - RC 2XF imensions and pressures for reference only, subject to change. P7 Tube Fittings ivision
8 SSC Hex Head olts Clamps - Order Today, SHIP TOY at Heavy Series High echanical Stress PC Weld Plate L SSC1X 1 10 x 1 45 SSC2X 2 10 x 1 60 SSC3X 3 10 x 1 70 SSC4X 4 12 x SSC5X 5 16 x SSC6X 6 20 x SSC7X 7 24 x SSC8X 8 30 x F G I PC1X x 1 PC2X x 1 PC3X x 1 PC4X x 1.5 PC5X x 2 PC6X x 2 PC7X x 2 PC8X x 2 SC Stacking olts PC ouble Weld Plate SW SC1X 1 10 x SC2X 2 10 x SC3X 3 10 x SC4X 4 12 x SC5X 5 16 x SC6X 6 20 x SC7X 7 24 x SC8X 8 30 x F G I PC1X x 1 PC2X x 1 PC3X x 1 PC4X x 1.5 PC5X x 2 PC6X x 2 PC7X x 2 PC8X x 2 ISC Cap Screws PLC Weld / Screw Plate L SW ISC1X 1 10 x ISC2X 2 10 x ISC3X 3 10 x ISC4X 4 12 x ISC5X 5 16 x ISC6X 6 20 x ISC7X 7 24 x ISC8X 8 30 x F G I K N PLC1X PLC2X PLC3X PLC4X PLC5X PLC6X PLC7X PLC8X imensions and pressures for reference only, subject to change. Tube Fittings ivision
9 TSC ounting Rail Clamps - Order Today, SHIP TOY at Heavy Series High echanical Stress PC ouble Top Plate H TSC1X LL TSC2X LL LENGTH (meter) F I PC1X PC2X PC3X PC4X PC5X PC6X PC7X PC8X TC Lock Nut SPC Locking Plate TC1X x 1 TC4X x 1.5 C E SPC1X SPC2X SPC3X SPC4X SPC5X SPC6X SPC7X SPC8X PC Top Plate F I PC1X PC2X PC3X PC4X PC5X PC6X PC7X PC8X USC Locking Washer USC1X 1,2, USC4X USC5X USC6X USC7X USC8X imensions and pressures for reference only, subject to change. Tube Fittings ivision
10 Clamps - Order Today, SHIP TOY at Twin Series Normal echanical Stress RP / RN Clamp Halves etric Tube Inch Pipe Inch Tube C E RP106X 6 RP106.4X 6.4 1/4 RP108X 1 8 5/ RP109.5X 9.5 3/8 R0X 10 1/8 R2X 12 RP212.7X /2 RP213.5X /4 RP214X 14 RP215X / RP216X 16 RP217.2X /8 RP218X 18 RP319X 19 3/4 RP320X 20 RP321.3X / RP322X 22 RP325X 25 1 RP426.9X /4 RP428X RP430X 30 R32X /4 R33.7X R35X R38X /2 R42X /4 aterial codes for clamp halves: Polypropylene - RP inside plain - RPG (for hose) Polyamide 6 - RN Width 30 mm SS Hex Head olt L TERIL SSL2/SS1X 1 6 x 1 35 SS2X 2 8 x 1 35 SS3X 3 8 x 1 45 SS4X 4 8 x 1 50 SS5X 5 8 x 1 60 IS Cap Screws L TERIL IS1X 1 6 x 1 35 IS2X 2 8 x 1 35 IS3X 3 8 x 1 45 IS4X 4 8 x 1 50 IS5X 5 8 x 1 60 imensions and pressures for reference only, subject to change. P10 Tube Fittings ivision
11 S Stacking olts Clamps - Order Today, SHIP TOY at Twin Series Normal echanical Stress T Lock Nut SW S1X 1 6 x S2X 2 8 x S3X 3 8 x S4X 4 8 x S5X 5 8 x C T/T1VERZX x 1 T2X x 1 P Weld Plate THICKNESS G 3 P1X x 1 5 P2X x 1 5 P3X x 1 5 P4X x 1 5 X x 1 P Top Plate P1X P2X P3X P4X X PR Weld Plate Strip S Locking Plate THICKNESS E 3 PR1X PR2X PR3X PR4X PR5X SW S1X 1 11 S2X TS ounting Rail US Locking Washer H TS11/1X LL TS14/1X LL TS30/1X LL TS11/2X LL TS14/2X LL TS30/2X LL LENGTH (meter) US/US1X US2X imensions and pressures for reference only, subject to change. Tube Fittings ivision
12 Clamps - Order Today, SHIP TOY at P12 Tube Fittings ivision
Industrial Tube Fittings Europe Technical handbook/catalogue /UK
Industrial Tube Fittings Europe Technical handbook/ Ermeto Original Tube clamps Visual index Technical data...s3 Material properties... S4 Assembly instruction... S5/6 Light series (DIN 305, part )...
More informationErmeto Original Tube clamps
Ermeto Original Tube clamps Visual inex Technical ata... S3 Material properties... S4 Assembly instruction... S5/6 Light series (DIN 305, part )... S6 Heavy series (DIN 305, part 2)... S6 Double series
More informationParker Ermeto Tube Clamps
Hyraulic & Offshore Supplies Parker Ermeto Tube Clamps YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Ermeto Original Tube clamps Visual inex
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationSemiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division
Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components
More informationPneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
More informationSection 4 Flanges. Edition 3
Section 4 langes dition 3 65 [4] LNGS Specifications SPIITIONS: NSI 16.5 - Pipe langes and langed ittings (merican) S2129 - langes for Pipes, Valves and ittings (ustralian) S4504 - ircular langes for Pipe,
More information230 kv Aluminum Bolted Bus Supports TYPE 16300, 16500, Ordering Information. or
230 kv luminum 230 kv luminum TYPE 16300, 16500, 16700 Cable Support The 16300, 16500 and 16700 series supports are designed for mounting stranded aluminum or CSR conductors. New cable support reduces
More informationPipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
More informationFIBERLIGN Suspension for OPGW
IERLIN Suspension for OPW NOMENCLTURE 1. olt 6. Housing 2. Lock washer 7. Strap 3. Lock nut 8. Structural Reinforcing Rods 4. Outer Rods 9. Current Transfer Tab 5. Insert (for OPW only) iberlign Suspension
More informationSeries SY3000/5000 Base Mounted Manifold Stacking Type/DIN Rail Mounted Connector Box 24V. D side D. Blanking plate assembly SX A
Type N SY/ ase ounted anifold Stacking Type/DIN Rail ounted Connector ox How to Order anifold SSY SY SY Specifications Symbol Specifications With connector box (CO spec.) N With connector box ( CO spec.)
More informationISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
More informationRPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16" to 2" bore Double acting pneumatic actuators
RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators 9/6" to 2" bore ouble acting pneumatic actuators elrin cetal Resin end cap cylinders for washdown, and corrosive environment application
More informationFemale - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101
atalog 4400 US Visual Index Use with 781, 782T, 782ST hoses. 10178-94 10678-94 13978-94 NPTF Pipe Male - Rigid JI 37 ode 61 11578-94 1478-95 11778-95 14F78-95 11978-95 14N78-96 ode 62 (5000 psi) 1678-96
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationBeam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationIsys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration
atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve
More informationTubi e Supporti. Rometec srl Via A Minuziano 87/89 Roma Tel fax
Tubi e Supporti Rometec srl Via A Minuziano 87/89 Roma Tel 06 5061635 fax 065061542 info@rometec.it www.rometec.it Tubi Elettropuliti Rometec srl - www.rometec.it - Rometec srl tubes - www.rometec.it
More informationSKF Power Transmission products
SK Power Transmission products 100 ouplings rid couplings................ 104 ear couplings................ 109 SK lex couplings............. 119 SK lex spacer coupling........ 121 hain couplings...............
More informationPIPE CLAMPS & FLANGES
PIPE CLAMPS & FLANGES Clamping of pipes in installations is required for purposes of damping vibrations, providing support to the installation and preventing loosening of joints and welds. INTRODUCTION
More informationI - Sheet Number I-PW Rev. A
I - Sheet Number I-PW013988 Rev. A Installation Instructions Part # 23948007/24048007 PARTS LIST: 1 Driver/left Sidebar 17 8-1.25mm x 25mm Hex Bolts 1 Passenger/right Sidebar 17 8mm x 24mm x 2mm Flat Washers
More informationPneumatic Connectors, Tubing & Cylinder Control Accessories
Pneumatic Pneumatic onnectors, Tubing & ylinder ontrol ccessories 290 G-ca Index Page No Push-in Fittings Overview.3 -.7 Push-in Fittings.8 -.22 Push-in Fitting Dimensions.23 -.47 ylinder ontrol ccessories
More informationAir Slide Table Series MXP
ir Slide Table Series XP ø, ø, ø, ø, ø1 X XU XS X XF X X XP XY TS - -X Individual -X 19 igh rigidity, igh precision Cylinder is built into the rail of the linear guide. aterial of body and guide block
More informationKD Fittings. Product range:
K Fittings Product range: ll-threads rackets rass Heads ams & olts ross owels Flush Mounts Inserts Insex Screws Maxi Luna Fittings Modeez Fasteners Panel onnectors Screws Stretcher Plates Tee Nuts Unita
More informationThe Best Solution For Process Piping Installations
The Best Solution For Process Piping Installations Forward Introduction Thank you for choosing Behringer, the world s leading manufacturer of Pipe and Tube supports. Behringer has been manufacturing pipe
More informationSWING GATE OPENERS 24V DC GEAR MOTOR
SWING GATE OPENERS 24V DC GEAR MOTOR FOR RESIDENTIAL USER MANUAL Flashing Light Push Button Control box Gate 2 Gate 1 Index 1. Warnings 2 4. Technical Characteristics 16 2. Product Description 2.1 Applications
More informationThe obvious choice in piping cushion clamp assemblies since 1966
The obvious choice in piping clamp assemblies since 1966 TM INTRODUCTION ydra-zorb Co. has been the leader in the strut mounted clamp market for over 40 years, offering a wide variety of solutions when
More informationSet screw mounted ball bearings
Features/Benefits For over 70 years, Dodge has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art
More informationDesign & Selection. Installation & Adjustment
U SM Series WRNING This product must not be used submerged in water, oil or powder, or where coolant, coolant fluid or swarf, etc., may come in contact. lways incorporate an interlock in the control circuit
More informationV6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012
BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent
More informationCHEVY SILVERADO CREW CAB RX3 Includes models equipped with DEF tank
2007-2017 CHEVY SILVERADO 1500-3500 CREW CAB RX3 Includes models equipped with DEF tank HARDWARE INCLUDED RECOMMENDED TOOLS 1 Passenger Side Front Support Plate 13mm Wrench 1 8-1.25 x 40mm Hex Bolt 13mm
More informationDriver/left Corner Fill Panel. Passenger/Right Corner Fill Panel Left and Right Bar Light L Brackets. (2) Plastic Plugs. License Plate Bracket
LD1 FRONT BUMPER PART#R102615 R102618 PARTS LIST: 1 LD1 Bumper Assembly 8 10mm Lock Washers 1 Driver/left Frame Mounting Bracket 8 10mm Hex Nuts 1 Passenger/right Frame Mounting Bracket 2 8-1.25mm x 25mm
More informationP R O D U C T C A T A L O G
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. P R O D U C T C A T A L O G 2017 Feb. 2 www.aaatech.com P R O U D L Y S E R V I N G I N D U S T R Y S I N C E 1 9 7 1 AAA Technology & Specialties Co.,
More informationASP330F-01 ASP430F-02 ASP530F-03 ASP630F-04 ASP430F-F02 ASP530F-F03 ASP630F-F04 R 1/4 R 3/8 R 1/2 R 1/4 R 3/8 R 1/2 NPT 1/8 NPT 1/8 NPT 1/4
Pilot check valve and speed controller are combined. Realizes momentary intermediate stoppage of a cylinder and able to adjust speed control of it. Work piece Example of drop prevention circuit Tubing
More informationYOUR LOCAL DISTRIBUTOR:
TM The obvious choice in piping clamp assemblies since 1966 TM ydra-zorb Co., P.O. Box 214407, uburn ills, MI 48321-4407 (248) 373-5151 Fax (248) 373-0711 www.hydra-zorb.com YOUR LOCL DISTRIBUTOR: INTRODUCTION
More information(2) 12mm x 40mm Short Low Profile Bolt Plates. (2) Spacer Washers. (4) 12mm Plastic Retainers. Passenger/Right Front.
PARTS LIST: 1 Driver/Left Running Board with 1 Rubber Backing (use on SX & Limited models) 4 12mm Plastic Retainer 1 Passenger/Right Running Board with 1 Rubber 4 12mm Lock Washer Backing (use on SX &
More informationMounted Spherical Roller Bearings
ounted odular bearing assembly consisting of sealed and lubricated spherical bearing with collar (setscrew) or concentric (adapter mount) locking system contained within a variety of housings types, mounting
More informationSeries 1 Steel - Straight Sections
- Straight Sections H-1 -Line series able Systems - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding system in this catalog is designed
More information4300 Catalog. Metric Tube. Parker Hannifin Corporation Tube Fittings Division Columbus, Ohio
Metric Tube Q 4300 Catalog Metric Tube Q2 4300 Catalog Metric Tube Introduction Parker offers three types of seamless metric tubes for hydraulic, pneumatic and instrumentation applications: dipped for
More informationTubing Tools and Accessories
www.swagelok.com Tubing Tools and Accessories Products Electric, bench top, and hand tube benders preparation tools support systems 2 Tubing Tools and Accessories Contents Benders Electric.... 2 Benders
More informationISO-6432 MINIATURE CYLINDER/NON-PIVOT TYPE MINIATURE CYLINDER. Specification. Model. Tube I.D. (mm) Port size M5 0.8 G1/8.
MCMI series ISO- MINITURE CYLINDER/NON-PIVOT TYPE MINITURE CYLINDER Table for standard stroke Single acting Double acting ø,,0,7,00 Tightening torque Order example Stroke (mm) ø0,,,0,7,00,,0 ø,0 0,,0,0,0,00
More informationIt s as simple as A,B,C...
TE 7000 It s as simple as A,B,C... Designing a data centre should be made easy and configuring a rack should be easier. In fact it should be as simple as ABC... This quick find brochure is designed to
More informationATLAS FM FULL METRIC INSERTS CATALOG
TLS F FULL ETRI INSERTS TLOG 915 TLS F FULL ETRI LIND THREDED INSERTS TLS F metric blind threaded inserts offer ideal solutions for blind attachment applications where only one side of a panel is accessible
More informationRight Bar Light L Bracket Left Bar Light L Bracket. License Plate Bracket
LD1 FRONT BUMPER PART#R102616 R102619 PARTS LIST: 1 LD1 Bumper Assembly 16 10mm x 27mm OD x 3mm Flat Washers 1 Driver/left Frame Mounting Bracket 8 10mm Lock Washers 1 Passenger/right Frame Mounting Bracket
More informationSection 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
More informationSaving you Time, Saving you Money, Putting you First! CENTER HUNG TRAY. Width Length in Inches
INTRODUCTION For an integrated wire management system, Center Hung Tray simplifies the support and routing of power and telecom/teledata cabling. single hanger rod is used at each support point. This makes
More informationDurco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d
P R E S E N T I N G T H E N E W urco Microfinish and General Purpose Threaded allvalves all Valves To Suit ll Needs ulletin VM-65d Rugged NSI 16.34 esign or Severe Service urco Microfinish ball valves
More informationFunction: Used to connect profiles at adjustable angles. Features: 1. Adjustable angles. Item Description For Screw Weight (g) Colour Finish Material
4.56 Swivel Fastener (SWF): Function: Used to connect profiles at adjustable angles. 1. Adjustable angles. SWF 1.25.0132.0 8 M6x S3.60 M6 S3.61 M6x S3.60 Item Description For Screw Weight (g) Colour Finish
More informationCompact direct acting precision regulator
direct acting precision Components preparation and pressure adjustment / unit CONTENTS Product introduction 6 Safety precautions 62 Discrete (RJB500) 624 Block manifold (MNRJB500) 626 Block configurations
More informationDigital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
More informationType EB, EBB, EBF and VEB DOUBLE SIDE BREAK SWITCHES 38 kv through 362 kv 600 to 3000 Ampere
Type EB, EBB, EBF and VEB DOUBLE SIDE BREK SWITCHES 8 kv through 62 kv 600 to 000 mpere TYPE EB 1 Morpac Industries, Inc. 2725 East Ginter Road Tucson, rizona 85706 520-294-452 FX 520-294-2 Type EB, EBB
More informationBefore repairs, remove the airbag sensor if shocks are likely to be applied to the sensor during repairs.
NOTICE: When inspecting or repairing the SRS, perform the operation in accordance with the following precautionary instructions and the procedure and precautions in the Repair Manual for the applicable
More informationSection 5 Fiber Optics: FIBERLIGN Hardware for OPGW
FIBERLIGN Hardware for OPGW: Section Section Fiber Optics: FIBERLIGN Hardware for OPGW Table of Contents Page Fiber Optic Product Layout for OPGW...-2 FIBERLIGN ead-end for OPGW...-3 FIBERLIGN Formed Wire
More informationNon-Contact Sensor for Workpiece Placement Verification
ir Catch Sensor Series 2 Non-Contact Sensor for Workpiece Placement Verification Stable detection of. to. mm clearance Due to the pneumatic bridge circuit and semiconductor pressure sensor, the non-contact
More informationTITAN BULK DELIVERY SYSTEMS
TITAN BULK DELIVERY SYSTEMS The RWM Titan Bulk Delivery System will save time, space and money for all route delivery companies. The Titan offers maximum maneuverability, zero turning radius and has a
More informationPS/PX/RS/RX Series Stealth Generation II Precision Planetary Gearheads
PS/PX/RS/RX Series Stealth Generation II Precision Planetary Gearheads Gen II Gearheads Provide Higher Radial Load, Increased Service Life and Ease of Mounting Features & Benefits Higher radial load capacity:
More informationToll Free (877) - ICFLUID
Introduction AEGI brackets are a sensible and easy way of securing piping and hoses in all type of industries and on all types of terrestrial or naval installations. AEGI brackets characteristics are:
More information8mm Bolt Plate. Passenger/right front only Upper Mounting Bracket
4 SIDE STEPS PARTS LIST: 1 Driver/left Side Step 13 8-1.25mm x 25mm Hex Bolts 1 Passenger/right Side Step 13 8mm x 24mm x 2mm Flat Washers 1 Passenger/right Upper Bracket (all incl. DEF) 13 8mm Lock Washers
More informationMaximum Working Pressure. Code Description Brass
Technical Information Series 500 General escription Series 500 low pressure ball valves provide total shut-off capability for services up to 41 ar (600 PSI). Series 500 consists of PT female/female ports,
More informationCONTENTS. Setscrew Ball Bearings
CONTENTS Features / Benefits... B4-3 How to Order / Nomenclature... B4-5 Selection... B4-6 Selection/Dimensions Pillow Blocks SC - Normal Duty... B4-12 SCAH Air Handling Normal Duty... B4-16 SCB Normal
More informationManufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations;
Corporate Headquarters SHEET METL CONNECTORS, INC. 5850 MIN STREET N.E. MINNEPOLIS, MINNESOT 55432 Toll Free: 800-328-1966 Local: 763-572-0000 Fax: 763-572-1100 www.smcduct.com Manufacturing Facilities
More informationSPECIFICATION/HOW TO ORDER/NOMENCLATURE
SPECIFICATION/HOW TO ORER/NOMENCLATURE PARA-FLEX SPECIFICATION PARA-FLEX s employ a molded, non-lubricated elastomeric flexing member loaded in shear. The flexible member is compounded natural or neoprene
More informationOperator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
More informationBand Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater
Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater A B C D E F General purpose terminal box offers excellent protection to the exposed terminals. To simplify electrical wiring, the
More informationAUMINUM EECTROYTIC CAPACITORS RAIA EA TYPE PART NUMBER SYSTEM ( Ⅰ ) Series Rated Voltage Capacitance Tolerance ead orming Type ead ength Case imension Special Request (1) (2) (3) (4) (5) (6) (7) (8) (1)
More informationDouble Sealed on Both Sides in one piece housing for structural rigidity
eries Right ngle elical/evel tainless teel ervofit odular ystem Features OER rives Inc. is proud to offer our quality-proven, high-efficiency eries elical/evel speed reducer in a stainless steel housing.
More informationPW150/PW200 USER MANUAL SWING GATE OPENERS 24V DC GEAR MOTOR
PW150/PW200 USER MANUAL SWING GATE OPENERS 24V DC GEAR MOTOR FOR RESIDENTIAL Flashing Light Push Button Control box Declaration of Conformity Applicant: Powertech Electronics Inc. Manufacturer: Timotion
More informationRack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
More informationSanitary Hangers & Supports For Clean Work Areas & Process Piping. Hi-Clean. PROCESS PRODUCTS Local Solutions For Individual Customers Worldwide
PROCESS PRODUCTS Local Solutions For Individual Customers Worldwide Click to visit www.steelobrien.com Hi-Clean Sanitary Hangers & Supports For Clean Work reas & Process Piping Hygienic Pipe and Supports
More informationSpecialty Bearing Interchange Guide
pecialty earing Interchange uide Only one name is synonymous with the finest-quality mounted tapered and spherical roller bearings, aldor odge. We are the standard against which all other bearings are
More informationSeries 1 Steel - Straight Sections
LST-1 able Systems - Straight Sections How The Service dvisor Works -Line knows that your time is important! That s why the color-coding system in this catalog is designed to help you select products that
More informationHusky 3300 Air-Operated Diaphragm Pump
/ aximiliano Thous, 22. 46009, Valencia (spaña) Operation usky 3300 ir-operated iaphragm Pump 30410 N eavy-duty 3-inch pump with large flow paths for fluid transfer applications, including high-viscosity
More informationCABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CLE MNGEMENT SOLUTIONS CTLOGUE2003/04 COMPLETE CLE MNGEMENT SOLUTION FOR COMMERCIL ND INDUSTRIL PPLICTIONS www.legrand.co.uk FSTRCK F31 FSTRCK F31 SYSTEM STEEL WIRE CLE TRY Legrand With a large range of
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationShinya Nojima President & COO Technology can be found wherever something is flowing The is a leading manufacturer of high-technology products for a wide range of industries. Our corporate policy is to
More information[ ] ] [ 6a2O s6 Height B PW CABLE TRAY PW CABLE TRAY
PW CBE RY PW CBE RY Covers protect and contain cables. hey are highly recommended ray Covers to avoid damage to the tray contents and to protect against the elements. Some covers can also be attached to
More informationStandard Tolerances. Product Data. Holding power is achived by the set screw engagment into shaft material.
Solid shaft collar SC / SSC Bore 1/8" - 3" +.001 - +.003 Bore 3"- 4-15/16" +.001 - +.004 Carbon Stainless Bore range 1/8" to 4-15/16" Alloy cup point set screw Mild -Zinc plate finish Bore range 1/8" to
More informationTERRATORQUE HELICAL ANCHORS AND HELICAL PILING PRODUCT CATALOG
TERRATORQUE HELICAL ANCHORS AND HELICAL PILING PRODUCT CATALOG INTRODUCTION TerraTorque offers quality helical anchors and helical piling to industry. Our products are available in square shaft (type TS)
More informationPIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables 2 40 4 44 MTERIL Unistrut pipe supports, unless
More informationPole Basics January, 2008
Pole asics Table of ontents Available Poles... Page 2 olt-on rackets... Page 3 Tenon ount rackets... Page 4 Internal Slipfitter... Page 5 Handhole overs... Page 5 Pole aps... Page 5 Anchor olts... Page
More informationSeries 1 Steel - Straight Sections
Series 1 Steel - Straight Sections Series 1 Steel H-1 B-Line series Cable Tray Systems Series 1 Steel - ccessories & Fittings Series 1 Steel How The Service dvisor Works We know that your time is important!
More information8mm Bolt Plate. (15) 8mm U-Clip Nuts. Passenger/right front Upper Bracket
PARTS LIST: 2 T-6 Side Bars 8 8mm Double Bolt Plates 1 Passenger/right Upper Bracket (all incl. DEF) 17 8-1.25mm x 25mm Hex Bolts 1 Passenger/right Lower Bracket (all incl. DEF) 33 8mm x 24mm x 2mm Flat
More informationMECHANICALSTEERING. Xtreme. Performance. & Reliability
MECHANICALSTEERING Xtreme Performance & Reliability Splined Liner Minimal Core to Liner Contact Area SSCX XTREME Cable Features Based on the current industry leading Xtreme technology Splined ridges on
More informationHigh Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
More informationFlame hardening steel. The height from the reference hole to the surface of the reference support block can be selected from 2 types HIGH or LOW.
is separated from the reference. INFORMTION Responses to reduction of spare parts, short lead times, and a drastic reduction of special orders Pin Plate ylinder ( machinable type) 1 HIGH type Flame hardening
More informationThe Complete Range of Fluid Power Products
The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd.
More informationContents - Sliding Track
ontents - Sliding Track SLIING TRK Track Series 120 2 Track Series 200 2 Track Series 450 2 Track Series 650 2 HNGRS 2 Wheel Hangers 2 4 Wheel Hangers 2 SLIING OOR HRWR Top Plate ssembly 3 SI FIX RKTS
More informationREPLACEMENT PARTS. General Information. General Instructions for Ordering Door Parts Order Parts Online at:
REPLCEMENT PRTS General Information Instructions for Ordering This parts manual is intended to assist in the correct identification of the more commonly replaced parts; covering, generally, all models
More informationINSTALLATION INSTRUCTIONS 5" BENT END SIDEBARS ROCKER PANEL MOUNT SILVERADO/SIERRA CREW CAB INCLUDES DIESEL W/DEF PART NUMBER
INSTALLATION INSTRUCTIONS 5" BENT END SIDEBARS ROCKER PANEL MOUNT PART NUMBER WB51010S WB51010B WB51019S WB51019B PARTS LIST: 1 Driver/left Sidebar 25 8-1.25mm x 25mm Hex Bolt 1 Passenger/right Sidebar
More information18" Transformer Cooling Fans
18" Transformer ooling Fans ertified air flow results tested to M Standards 230 for fan thrust mbient Temperature Range -32 F/-36 and 104 F/40 luminum housing for excellent heat dissipation Rated severe
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationProducts Recommended for Steam Service
oss ouplings Products Recommended for Steam Service Quick isconnect ittings ~ actory nly Quick disconnect fittings (socket and plug) are available in solid brass with stainless steel springs and locking
More informationComponents: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
More informationQuick quarter-turn rotation. High cycle stem design. Integrated mounting pad for actuators. Compact assembly. Complete line of accessories.
36 Series Stainless Steel 2-way ull Port all Valve The 36 is a full port, 36 stainless steel, 3 piece ball valve. t is available with threaded ends (36N), socket weld ends (36S), or quick clamp ends with
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
More informationProduct Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
More informationFEATURES/BENEFITS. Setscrew Ball Bearings. DODGE End Covers
or over 70 years, DODGE has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built
More informationP & P Technology Ltd
P & P Technology Ltd General Information Produced effectively from a single continuous filament, knitted wire meshes produce very high levels of EMI shielding performance when evenly compressed between
More information