The UK s largest independent multi-metals stockholder. Stainless Steel High Pressure Fittings
|
|
- Trevor Baker
- 6 years ago
- Views:
Transcription
1 The UK s largest independent multimetals stockholder Stainless Steel igh Pressure Fittings
2 Threaded Fittings r The UK s largest independent multimetals stockholder 90 Elbow 45 Elbow Equal Tee Reducing Tee ap Full oupling alf oupling Socket Weld Fittings Union Stainless Steel igh Pressure Fittings To complement the already extensive stock range of Stainless Steel NSI Pipe, Fittings and Flanges, alco now holds a range of NSI. 000lb igh Pressure Fittings. 90 Elbow 45 Elbow Equal Tee Reducing Tee The range includes 000lb Socket Weld fittings and 000lb NPT Threaded Fittings, both in grades 04L and L. Full oupling Union ap The information contained herein is based on our present knowledge and experience and is given in good faith. owever, no liability will be accepted by the ompany in respect of any action taken by any third party in reliance thereon. s the products detailed herein may be used for a wide variety of purposes and as the ompany has no control over their use, the ompany specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or their fitness for any particular purpose. ny advice given by the ompany to any third party is given for that party s assistance only and without any liability on the part of the ompany. If you do not find what you require here, please call your local Service entre, listed on the back cover, as the range is always expanding. ny contract between the ompany and a customer will be subject to the ompany s onditions of Sale. The extent of the ompany s liabilities to any customer is clearly set out in those onditions; a copy of which is available on request. imensions: Please note that all dimensions are approximate and may vary according to manufacturing tolerances. (Issue March 0) LO is a registered trademark of alco Metals Ltd
3 90 Elbow SOKET WELIN imensions in millimeters N (vg) (min) (min) rades vailable 04L L 45 Elbow SOKET WELIN imensions in millimeters N (vg) (min) (min) rades vailable 04L L Equal Tee SOKET WELIN imensions in millimeters N (vg) (min) (min) rades vailable 04L L
4 Reducing Tees SOKET WELIN imensions in millimeters Nom. Flow ranch rades vailable Flow ranch (vg) (min) (vg) (min) L L Full oupling SOKET WELIN imensions in millimeters N (vg) E (min) (min) rades vailable 04L L E
5 Union L SOKET WELIN imensions in millimeters Nom. Pipe Size Pipe End (min) Socket ore Socket Wall (min) Water Way ore Laying Lngth E Male Flange (min) F Nut (min) Thrds / 5.4mm earing (min) Socket epth K Length ssem. Nom. L lear ssem. Nut N rades vailable 04L L K E F N Threads Minimum 4 Full Threads Engagement lass / fit NSI : 90 Elbow TREE imensions in millimeters L N L (min) rades vailable 04L L 45 Elbow L TREE imensions in millimeters N L (min) rades vailable 04L L 4
6 Equal Tee L TREE imensions in millimeters N L (min) rades vailable 04L L Reducing Tees L TREE imensions in millimeters Nom. Flow ranch rades vailable Flow ranch Flow ranch L L (min) L L alf oupling TREE imensions in millimeters N L W rades vailable 04L L L W/ 5
7 Full oupling TREE imensions in millimeters N L W rades vailable 04L L L W Union TREE imensions in millimeters Nom. Pipe End (min) Wall (min) Water Way ore Male Flange (min) F Nut (min) Thrds / 5.4mm 4 0 earing (min)...5. Length ssem. Nom. L lear ssem. Nut N rades vailable 04L L F N Threads Minimum 4 Full Threads Engagement lass / fit NSI : L ap TREE imensions in millimeters N 5 0 L P (min) rades vailable 04L L L P
8 W E E exagon Nipple TREE imensions in millimeters b N W E b rades vailable 04L L exagon Plug TREE imensions in millimeters F N F (Nom) rades vailable 04L L 7
9 For further information, please contact your local alco Service entre, or visit our website Stainless Steel igh Pressure Fittings s one of the largest independent metal stockholders in the UK, we have a lot to offer our customers: n extensive inventory of luminium, opper, rass and bronze in all semifinished forms wide range of grades / alloys in all shapes and sizes comprehensive processing service which includes polishing, coating, blanking and 'cut to length' knowledgeable and dedicated workforce with nationwide coverage provided by our Service entres Reliable ontime delivery of orders EREEN Tel aberdeen@aalco.co.uk YLESURY Tel aylesbury@aalco.co.uk ELFST Tel 090 belfast@aalco.co.uk IRMINM Tel birmingham@aalco.co.uk EPSTOW Tel 09 chepstow@aalco.co.uk YFE Tel 09 dyfed@aalco.co.uk ESSEX essex@aalco.co.uk LSOW Tel glasgow@aalco.co.uk ULL Tel 04 hull@aalco.co.uk LEES Tel leeds@aalco.co.uk LO is a registered trademark of alco Metals Ltd LIVERPOOL Tel liverpool@aalco.co.uk MNESTER Tel manchester@aalco.co.uk NEWSTLE Tel newcastle@aalco.co.uk NORWI Tel norwich@aalco.co.uk NOTTINM Tel nottingham@aalco.co.uk PLYMOUT Tel plymouth@aalco.co.uk SOUTMPTON Tel southampton@aalco.co.uk STOKE Tel stoke@aalco.co.uk SWNLEY Tel swanley@aalco.co.uk esigned and produced by Squarefox esign Limited
Road Transport Bodybuilding Manual
Technical Publication No. 00 ISSUE. 0.0.0 Road Transport Bodybuilding Manual Bodybuilding with Aalco Technical Publication No. 00 February 00 This publication is intended as a guide to the Bodybuilder.
More informationA company you can count on...
A company you can count on... About Us Our customers trust us to deliver the right product at the right time, on time, every time. Our business is based on a tradition of service, aiming to be your first
More informationAluminium Alloy: EN Standards for Aluminium Extrusions
The old BS1474-1987 standard has been replaced by a number of EN standards of which the most important are: ALLOY GROUPS Alloy EN754 - Cold drawn rod, bar & tube EN755 - Hot extruded products EN12020 -
More informationStandard Stock Range. The UK s largest independent multi-metals stockholder.
Standard Stock Range The UK s largest independent multi-metals stockholder www.aalco.co.uk Aalco is the UK s largest independent multi-metals stockholder, with an extensive inventory of aluminium, stainless
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationCarter Pressure Loss Compensator and Venturis. Model Model Model Model Model 64086
Carter Pressure Loss Compensator and Venturis Model 60559 Model 64088 Model 64085 Model 64193 Model 64086 esign Concepts Eaton s Carter product line includes Model 60559 Pressure Loss Compensator and a
More informationLarge. Bespoke. Diameter. Fittings to Suit any Pipe Specification
Bespoke Large Fittings to Suit any Specification pipe ONNEIONS, repair & flow control products for the utilities industry Large Overview Robust, Reliable, Proven Solution for New Lay s ustomer Design Liaison
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationHIGH PERFORMANCE SEGMENTED V-BALL CONTROL VALVE
HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE GENERL INFORMTION HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE High Rangeability: 300:1 Turn down ratio Flow haracteristic: Equal Percentage Low Pressure Recovery Rate:
More informationIndustrial Range. Why Neumo...?
Why Neumo...? NEUMO opens the door to 1800 tonnes of Stainless Steel products. Our comprehensive stock range is carefully chosen to ensure NEUMO UK Ltd. can be your complete Stainless Steel logistics partner,
More informationSERIES V. High Performance Segmented Ball Valve
SERIES V High Performance Segmented Ball Valve Publication SV000-101 Issue 02/17 Rev. D General Information High Rangeability: 300:1 Turn down ratio Flow Characteristic: Equal Percentage Low Pressure Recovery
More information*Applies to 6 x 4" No. 650 Reducer only. C to E. No No º Elbow Approx. Wgt. Each Lbs. kg. C to E Inches mm JOB/OWNER CONTRACTOR ENGINEER
SEE VITAULI PULIATION 0.0 FOR DETAILS TS fittings for use with Style 606 copper connection couplings or Style 64 Vic-Flange Adapters. Fittings are full flow, standard radius wrought copper supplied roll
More informationSKF Power Transmission products
SK Power Transmission products 100 ouplings rid couplings................ 104 ear couplings................ 109 SK lex couplings............. 119 SK lex spacer coupling........ 121 hain couplings...............
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
ARBON STL PIP - GROOVD FITTINGS Grooved nd Fittings S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles.
More informationParts Manual Vermeer/ McLaughlin V750 Vacuum Machine (Serial #7G G )
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual Vermeer/
More informationFORGED HIGH PRESSURE FITTINGS
ORE HIH PRESSURE ITTINS EVEREST OLEN HIHOPE INUSTRIL IN. EVEREST VLVES & ITTINS M. O., LT (or hina s Shipment) Mail address: P. O. ox 5 Taichung, Taiwan, R.O.. Tel: -4-3753/3773 ax:-4-37/3750 ddress:,
More informationSteel Stock Range & Specifications
Steel Stock Range & Specifications OUR SUPPORT NETWORK SETIONS MNUFTURING SERVIE ENTRE METL ENTRE SLES OFFIE UNEE EINURGH LISURN ULIN NORTH WEST STOKE WOLVERHMPTON NEWSTLE TEESSIE TEESSIE EM MILL HULL
More informationMalleable Iron Pipe Fittings BS EN Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT.
Malleable Iron Pipe Fittings BS EN 10242 Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT. FM 20478 George Fischer Ltd. Profile of a Company In 1802 Johann Conrad Fischer
More informationBRONZE FITTINGS. Class 125 (150) For steam, water, gas, oil and air service Standard specifications PRICING FILE AVAILABLE ONLINE
NIPPLES & FITTINGS RONZE FITTINGS U L UL842, UL258, UL125, Class 125 (150) For steam, water, gas, oil and air service Standard specifications Materials - STM 62-93 (85,5,5,5) C83600 PRICING FILE VILLE
More informationPlastic Handles, T-Handles & PVC Grips. Leaflet No. A06.1
I N D U S T R I L M N U F T U R I N G S I N E 1 9 2 3 Leaflet No. 06.1 Plastic Handles, T-Handles & PV Grips I N D U S T R I L M N U F T U R I N G S I N E 1 9 2 3 Who we are Rencol s flexible manufacturing
More informationPVC AND CPVC PRESSURE PIPES ASTM D-1785 and F-441 Schedule 80
2 PVC AN CPVC PRESSURE PIPES ASTM -1785 an F-441 Scheule 80 PVC ASTM 1785 SCHEULE 80 NOMINAL OUTSIE IAMETER PVC SCHEULE 80 WALL THICKNESS WORKING PRESSURE WEIGHT IN IN MM IN MM PSI @73F LB/FT 10022 1/8
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationAIRLINE EQUIPMENT CATALOGUE //
AIRLINE EQUIPMENT CATALOGUE // 16 15 14 13 12 11 10 9 The Fort Vale Range of Airline Ball & Butterfly Valves 8 Fort Vale Engineering Ltd. 2014 THIS PAGE IS INTENTIONALLY BLANK AIRLINE VALVE CATALOGUE //
More informationLIMITED WARRANTY. Some products and sizes may be discontinued when stock is depleted, or may require a minimum quantity for ordering.
LIMITED WRRNTY Bradford, a division of Dixon Valve and Coupling Company, (herein called "Bradford") warrants the products described herein, and manufactured by Bradford to be free from defects in material
More information1-14 Fittings and Accessories
-4 ittings and ccessories entricast Piping Systems NOV iber Glass Systems offers a complete line of fittings manufactured from both epoxy and vinyl ester resins. These fittings and adhesives provide the
More informationParts Manual V100G Vacuum Machine Part #E (SERIAL #1G G )
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual V100G Vacuum
More informationAluminum Rigid Conduit (ARC)
luminum Rigid Conduit (RC) luminum Rigid Conduit (RC) luminum Rigid Conduit is light weight and is approximately one-third the weight of steel Corrosion Resistant aluminum resists most corrosive atmospheres
More informationAK Pipe Fittings Pvt. Ltd. (Formerly Gujarat Engineering Company)
wwwakpfcoin Piping Products Piping Precision Productivity P F Pipe Fittings Pvt Ltd (Formerly ujarat Engineering ompany) ffice/works : Plot No 87 (lindra) Phase Savli I Industrial Estate Next to rd I Water
More informationLocks, Latches & Vents. Leaflet No. A10.2
I N U S T R I L M N U T U R I N S I N 1 9 2 3 Leaflet No. 10.2 Locks, Latches & Vents I N U S T R I L M N U T U R I N S I N 1 9 2 3 Who we are Rencol s flexible manufacturing capabilities, engineering
More informationValves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
More informationRed Thread IIA Primary Fittings (Product Data)
Red Thread IIA Primary Fittings (Product Data) FUEL HANDLING 90 and 45 Elbow, Flange and Tee Pipe Size A B C D E F O X 1 X 2 in mm in mm 2 50 3 3/8 86 2 1/4 57 3/4 19 4 3/4 121 3/4 D-4 Holes 19 D-4 Holes
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi (4,500 bar)
igh Pressure Valves, ittings and Tubing Pressures to psi (4,00 bar) MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality
More informationLamontite Securex Solder Ring Chrome Brazing Kingley Tools Flanges & GHD Valves Copper tube
Specialists in Plumbing Fittings Lamontite Securex Solder Ring Chrome Brazing Kingley Tools Flanges & GHD Valves Copper tube Specialists in Plumbing Fittings Tel: 04 558 882 04 558 5599 Fax: 04 558 9966
More informationDuplex Steel & Engineering Company
+91-8048601907 Duplex Steel & Engineering Company https://www.duplexsteel.net/ Incorporated in the year 1996, we at Unisteels and Engg. Co. Pvt. Ltd. are engaged in exporting, supplying variety of Super
More informationThe intelligent stainless steel stock range. Stainless, highly corrosion and heat resistant steels
The intelligent stainless steel stock range Stainless, highly corrosion and heat resistant steels A material grade makes history. Even at the end of the 19th century it was discovered that the corrosion
More informationSection 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
More informationTECHNICAL DATA. Notes: For use with Trim Charts on Pages 2-4
Page 1 of 5 Model F Dry Valve with Trim Valve Size Part Number 3 13764PTR 4 13765PTR 6 13766PTR Standard Trim Sets include galvanized nipples and fittings. 4 Dry Valve Shown General Notes: Notes: For use
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationSECTION 14 - HINGES WDS
SION 14 - INS INS 14-1 to 14-3, Surface Mounted inges... 14-12 to 14-14, 14-23 to 14-24 Spring Released inges... 14-18 to 14-20 ift Off inges... 14-3 to 14-8, 14-11 orque inges... 14-21 xposed orner inges...
More informationCarbon Steel Nipples
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications
More informationParts Manual V100G Vacuum Machine Part #E (SERIAL #1G G )
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual V100G Vacuum
More informationGroup 6. 10K High Pressure Fittings Tubing Nipples Adaptors
Group 0K High Pressure Fittings Tubing Nipples Adaptors INEX Page ontents 2 Index 3 0K Fittings NPT-NPT 4 0K Fittings JI-JI, JI - NPT 5 X-Overs - HP Fittings / Male Threads -8 High Pressure Fitting and
More informationFIRESAFE & LETHAL SERVICE BALL VALVE CATALOGUE //
FIRESAFE & LETHAL SERVICE BALL VALVE CATALOGUE // FIRESAFE & LETHAL SERVICE BALL VALVES // CONTENTS // FIRESAFE & LETHAL SERVICE BALL VALVES //» 1" Firesafe / Lethal Service Ball Valve» 2" Firesafe / Lethal
More informationEM... The Quiet Alternative
EM PROUTS PHILLIPS & TEMRO INUSTRIES EM PROUTS 538 ottonwood Lane Prior Lake, Minnesota 55372 (952) 44-9 fax: (952) 44-34 phillipsandtemro.com EM... The Quiet lternative Industrial & Marine Silencers Exhaust
More informationTube Fitting PP Series
http://www.pisco.co.jp FITTING ONTOLLE VALVE TUE MAKE-TO-ODE PODUTS Push-In Fitting Type for lean Environment Tube Fitting 178 opper alloy free material Nongrease lean-room packaging option hemical Industry
More informationIS&G STEEL STOCKHOLDERS LTD PRODUCT GUIDE
IS&G STEEL STOCKHOLDERS LTD PRODUCT GUIDE IS&G IS&G Steel Stockholders Ltd have been established for over eighty years. We have branches at Beckenham in Kent; Chelmsford in Essex and Ipswich in Suffolk.
More informationWirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Edgewound Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Edgewound Tubular STNR ELETRIL SPEIFITIONS GLOL HISTORIL POWER RTING P 25 W FETURES High temperature vitreous coating omplete welded construction
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationPrices subject to change without notice. - International product pricing will vary. ASA-LIT 11/01
NEW PRODUCTS Larger Radius Elbow Weld ittings Nor-Cal offers 45 and 90 Radius Elbows in sizes up to ten inches OD. Radius elbows offer the highest conductance geometry in a tube bend. These elbows are
More informationI nsulati o n CATALOG OF MATERIALS, TOOLS & ACCESSORIES
I nsulati o n Fourth Revision The Kingspan System CATALOG OF MATERIALS, TOOLS & ACCESSORIES September 2018 Contents Page Introduction 3 Kingspan KoolDuct Panels & Ancillaries 4 Kingspan KoolDuct Flanges
More informationUltra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, ittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
More informationQuickFit. Simple. Couplings & Flange Adaptors. Pioneers in pipe solutions. Close Tolerance Preassembled Fittings
Simple QuickFit Couplings & Flange Adaptors Close Tolerance Preassembled Fittings Pioneers in pipe solutions QuickFit Overview Dedicated Couplings & Flange Adaptors The QuickFit coupling range is designed
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More information3000 lb Socket Weld Fittings - ANSI B16.11/BS 3799
Weld and Threaded Fittings 3000 lb Weld Fittings - ANSI B6./BS 3799 /8 /4 3 /8 / 3 /4 /4 / / 3 4 Centre to Bottom of 45 Tees, & Elbows Bore Diameter Bore Diameter of Fittings Thickness s - Average socket
More information... i. ... ii. ... iii. ... v. ... vii. General Characteristics & Order Information. ... x ... A ... B ... C ... D ... E
M E H N I L L Y T T H E F I T T I N G S Table of ontents Table of ontents.............................................................................. i etailed Table of ontents..............................................................................
More informationLEAD-FREE * PERFORMANCE BRONZE FITTINGS
LEAD-FREE * PERFORMANCE BRONZE FITTINGS NIBCO Wrot Copper Solder Fittings manufactured in Stuarts Draft, Virginia, are 3rd party certified to Annex G of NSF/ANSI 61. For our complete offering of wrot copper
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationSERIES 7400 THREE PIECE BALL VALVES
SERIES 7400 THREE PIECE BALL VALVES Publication S7400-101E Issue 05/16 SERIES 7400 Body Stainless Steel (A351-CF8M) Carbon Steel (A216-WCB) Seat TFM* RPTFE PEEK ALTA Stem 316 Stainless Steel ISO 5211 Mounting
More informationYSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
More informationSTOCK RANGE. Unit 16 Crondal Road Bayton Road Industrial Estate Coventry CV7 9NH.
STOCK RANGE 02476 932 999 sales@ajsteelservices.com Unit 16 Crondal Road Bayton Road Industrial Estate Coventry CV7 9NH www.ajsteelservices.com ABOUT ABOUT THE THE COMPANY AJ Steel Services is an independent
More informationMK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationupvc PRESSURE AND COMPRESSION FITTINGS
upvc PRESSURE AND COMPRESSION FITTINGS Company Profile Proplastics is the leading supplier of world class plastic pipe systems for water and sewer reticulation in Southern Africa. Established in 1965,
More informationSmith-Blair OMNI Coupling System Advantages:
OMNI Coupling System SmithBlair s OMNI Coupling System utilizes the tremendous tensile strength of ductile iron to your best advantage. Applying the principles of space age technology to engineer the OMNI
More informationOrder code information
3 Piece Threaded High Pressure Fire-Safe all Valves Order code information 1.1 3 piece threaded fire-safe ball valves ody Rating Shell Material Valve ore nd onnection Trim Material Firesafe Seat & Seal
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationMARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationCM Body Assembly Service Parts List CM 93 and CM 04 Body Styles
Document Number Issue Date 12/01/93 Rev. Date 5/11/18 CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles Body Style Identification Pump Material Body Style Pumps Built After 2004 Pumps Built
More informationConvoluted Teflon Hose
eroquip E645 Nomex Reinforced onvoluted Teflon Hose Lightweight Meets performance requirements of S1227 50% tighter bend radius Improved flexing characteristics Table of ontents Weight omparison 3 E645
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationIDF / ISS Hygienic Union BS 4825 Part 4
IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960. This hexagonal screwed union is more commonly referred
More informationSection 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
More informationSeries MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
More informationWet Tantalum Capacitors Cylindrical Body, Hermetically Sealed
Wet Tantalum Capacitors Cylindrical Body, ermetically Sealed PERFORMANCE CARACTERISTICS Operating Temperature: to +175 C with proper derating Voltage Range: 8 V C to 630 V C at 85 C Reverse Voltage: none
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationSeries Pressure Relief Valves 197C
Series 2700 Pressure Relief Valves 197C Table of Contents General Description...IFC Ordering Information & Numbering System...1 Bill of Materials-Conventional...2 Bill of Materials-Balanced Design...3
More informationQUALITY EX STOCK. Summary of available products ISSUE 3. Bars Pipes and tubes Fittings Hollow bars Angles Special sections Plates and sheets
QUALITY EX STOCK Summary of available products Bars Pipes and tubes Fittings Hollow bars Angles Special sections Plates and sheets ISSUE 3 STAPPERT The brand for steels. STAPPERT offers a diverse range
More informationHAMMER UNIONS AND SWIVEL JOINTS. Sara Sae
HAMMER UNIONS AND SWIVEL JOINTS Sara Sae Quality and Innovation Sara manufactures a diverse range of oilfield equipment in its manufacturing facility in India, using the latest design techniques and CNC
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationForged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500
Forged Steel olted & Welded onnet Gate Valves s: 1/4 thru 3 Pressure lass: 150 thru 4500 Manufactured by Newmans Rev: 052109 13 Typical Newco Forged Steel olted & Welded onnet Gate Valve Expanded View
More informationSH Stainless Steel Piping System
Stainless Steel Piping Systems SH Stainless Steel Piping System 2018 PRICE LIST Industrial Applications Heating Compressed Air Closed Water Circulation Systems ry Fire Water Mains Solar SH system pipes
More informationTube Fitting Stainless SUS316 Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type of Corrosion Resistant Steel Tube Fitting SUS316 108 Copper alloy free material Nongrease Clean-room packaging
More informationEZ FIT SYSTEM FLEXIBLE CONNECTORS: SERVICE STATION HARDWARE
SERVICE STATION HARDWARE : EZ FIT SYSTEM By stocking just a few fittings and the right kind of FLEX-ING brand flexible connectors, you can transform your inventory into a versatile offering that s ready
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationTube Fitting Brass Series
http://www.pisco.co.jp FITTING ONTO VV TU MK-TO-OD PODUTS rass Push-In Fitting Type for Spatter-Proof Tube Fitting rass 212 N, FKM, N for Seal ubber Selection esistant to Flame and Weld Spatter Superior
More informationVic -300 Butterfly Valves
R IPS RON STL PIP ROOV VLVS 08.0 Vic -300 utterfly Valves PROUT SRIPTION ear Operator 3" with Position andle Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 PSI (065 kpa).
More informationLINED EQUIPMENT // Fort Vale Engineering Ltd CATALOGUE REVISION_
LINED EQUIPMENT // 3 45 Footvalve 4 to 3 Hydraulic Footvalve 25mm Ball Valve 50mm Ball Valve 80mm Ball Valve 3" Butterfly Valve MK3 65mm Flanged Relief Valve 80mm Flanged Vacuum Vent Valve Fort Vale Engineering
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationKämmer Series Low Flow Valves
flowserve.com Kämmer Series 030000 Low Flow Valves Description Kämmer series 030000 low flow valves are designed for precision controlling up to PN40. The body is a precision casting for high finishing
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationC&N Industrial Group Limited. Better Pipeline, Better Connection.
C&N Industrial Group Limited Better Pipeline, Better Connection. About C&N Flange & Fitting producing Steel pipe expand & Welding Pipe accessories(jiangsu) Pipeline technology consult Incorporate on C&N
More informationOilfield Products Composite Catalogue
VLVES N OILFIEL SUPPLIES Oilfield Products omposite atalogue SHORT VERSION FST TRK SUPPLY ROSSES TEES HOKES OILPTH VLVES FLNGES STUS RING GSKETS PIPE OILPTH VLVES FLNGES STUS RING GSKETS PIPE FITTINGS
More informationPipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
More informationBronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)
SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents ronze Gate Valves ontents Page Figure Number Index
More informationDisconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494
Technical ata isconnect Switch and ircuit reaker Mechanism Specifications ulletin Number 1494 Topic Page 1494U isconnect Switch Specifications 2 1494, 1494F, 1494G, 1494R, 1494V isconnect Switch Specifications
More informationKenstan. Volume 5. Knob Line of Locks. Introduction. Cam Locks. Drawer/Door Locks. Snap Bolt Lock. Plunger Lock PL40.
Volume 5 a t a l o g L O K O M P N Y of Locks 2 S V Introduction 1 am Locks 2 3 rawer/oor Locks 4 Snap olt Lock 5 PL40 6 PL45 7 PL50 8 L O K O M P N Y List and ata Sheet Introduction 1 of Locks Standard
More informationPneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
More informationBUTTERFLY VALVE CATALOGUE //
BUTTERFLY VALVE CATALOGUE // 11 The Fort Vale of s 1 CATALOGUE REVISION_01-.0.0 Fort Vale Engineering Ltd. 20 BUTTERFLY CATALOGUE // CONTENTS // 2 BUTTERFLY VALVES //» 2 CLAMPED WIDDOP BUTTERFLY VALVE
More information