*Applies to 6 x 4" No. 650 Reducer only. C to E. No No º Elbow Approx. Wgt. Each Lbs. kg. C to E Inches mm JOB/OWNER CONTRACTOR ENGINEER
|
|
- Martha Ramsey
- 5 years ago
- Views:
Transcription
1 SEE VITAULI PULIATION 0.0 FOR DETAILS TS fittings for use with Style 606 copper connection couplings or Style 64 Vic-Flange Adapters. Fittings are full flow, standard radius wrought copper supplied roll grooved or bronze castings with as cast grooves. urrently available configurations are 90 elbows No. 60, 45 elbows No. 6, straight tees No. 620, grooved reducing tees, grooved by cup reducing tees and grooved by PermaLynx reducing tees, grooved concentric reducers No. 650, grooved by cup concentric reducers No. 652, grooved by PermaLynx concentric reducers No. 653 and No. 660 caps. MATERIAL SPEIFIATIONS : Wrought copper per ASTM or ASTM * and ANSI 6.22, or bronze sand casting conforming UNS or *Applies 6 x 4" No. 650 Reducer only. DIMENSIONS Elbows, Tee and ap NO º Elbow NO. 6 45º Elbow NO. 620 Tee NO. 660 ap E E E E E T No. 60 No. 6 No. 620 NO. 660 Nominal E No º Elbow E No. 6 45º Elbow E No. 620 Tee c c / c c c c c c c c c c c c c c c c c c T No. 660 ap JO/OWNER ONTRATOR ENGINEER System No. Submitted y Spec Sect Para Location Date Approved Date VITAULI IS A REGISTERED TRADEMARK OF VITAULI OMPANY. 200 VITAULI OMPANY. ALL RIGHTS RESERVED. _
2 Reducing Tee Grv. Grv. Grv. Grv. Grv. up Grv. Grv. E E E up Nominal Grv. Grv. Grv. E E Grv. Grv. up up E Grv. Grv / / / /2 2/2 3/ / / / / / c / c / / / c / c c * PL refers PermaLynx end and PL dimensions include the tube insertion depth. VITAULI IS A REGISTERED TRADEMARK OF VITAULI OMPANY. 200 VITAULI OMPANY. ALL RIGHTS RESERVED. _2
3 Reducing Tee Grv. Grv. Grv. Grv. Grv. up Grv. Grv. E E E up Nominal Grv. Grv. Grv. E c c / c c c c E Grv. Grv. up up E Grv. Grv. * PL refers PermaLynx end and PL dimensions include the tube insertion depth. VITAULI IS A REGISTERED TRADEMARK OF VITAULI OMPANY. 200 VITAULI OMPANY. ALL RIGHTS RESERVED. _3
4 oncentric Reducer No. 650 Grv. Grv. No. 652 Grv. up No. 653 Grv. E E E E up E E No. 650 No. 652 No. 653 Nominal E E No. 650 Grv. Grv. E E No. 652 Grv. up up E E No. 653 Grv / / / / / / c / c / c c c c c c c * PL refers PermaLynx end and PL dimensions include the tube insertion depth. VITAULI IS A REGISTERED TRADEMARK OF VITAULI OMPANY. 200 VITAULI OMPANY. ALL RIGHTS RESERVED. _4
5 INSTALLATION Reference should always be made the I-600 Victaulic Field Installation Handbook for opper onnection Products. Handbooks are included with each shipment of Victaulic products for complete installation and assembly data, and are available in PDF format on our website at. WARRANTY Refer the Warranty section of the current Price List or contact Victaulic for details. NOTE This product shall be manufactured by Victaulic or Victaulic specifications. All products be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right change product specifications, designs and standard equipment without notice and without incurring obligations. This includes the substitution of wrought for cast or cast or wrought constructed fittings that provide the same fit and function. For complete contact information, visit 653 REV G UPDATED /200 VITAULI IS A REGISTERED TRADEMARK OF VITAULI OMPANY. 200 VITAULI OMPANY. ALL RIGHTS RESERVED.
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
ARBON STL PIP - GROOVD FITTINGS Grooved nd Fittings S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles.
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationHot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The Style 177 QuickVic flexible coupling is installation-ready, and joins 2-8"/50-200 standard roll grooved and cut grooved steel pipe. The coupling's unique
More informationHousing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The patented Style 107H rigid coupling joins 8"/50 200 standard roll grooved and cut grooved steel pipe.* The joint is assembled without disassembling the bolts,
More informationModel C10 / C11 / C20 / C60 Grooved Fitting For Copper Tubing Nominal Pipe Pipe C10 90 o Elbow C11 45 o Elbow C20 Tee C60 Cap
GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloy C89836* Bismuth copper alloy per ASTM B584. Materials
More informationQuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS
H ONL. SEE PAGE 4 FOR DETAILS. The patented Style 107 rigid coupling joins 12"/50 300 standard roll grooved and cut grooved steel pipe. The joint is assembled without disassembling the bolts, nuts, gasket
More informationSize Inches UL ULC FM. Pipe Sch.
IPS CARBON STEEL PIPE - FIRE PROTECTION PRODUCTS FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) FireLock Style 005 rigid coupling has a unique, patented angle-pad design
More informationLenntech Tel Fax
SEE VICTAULIC PUBLICATIO.01 FOR DETAILS Style 99 Roust-A-Bout couplings are designed with heavy housings and grips to provide a strong component for joining plain and beveled end, including Schedule steel
More informationSEE VICTAULIC PUBLICATION FOR DETAILS
dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table
More informationGROOVED FITTINGS FOR COPPER TUBING
GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloys C90500 and or C89836* Bismuth copper alloy per ASTM
More information08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
More informationREQUEST PUBLICATION 18.11
* SEE VICTALIC PBLICATION 10.01 FOR DETAILS The Victaulic Pressfit 316 System for joining approved Type 316/316L stainless steel pipe provides a fast, easy, clean, reliable means for joining ½"/15, ¾"/
More informationVictaulic Discharge CBV Vibration Isolation Pump Drop Series 383/383G
Victaulic Discharge CBV Vibration Isolation Pump Drop Series /G 2..0 PRODUCT DESCRIPTION Available Sizes 2"/ - 00 Offered in full or reduced port size (see Section.0 for details). Maimum Working Pressure
More information70.03 Victaulic Vortex TM
Series 951 Combination Box with Ball Valve Series 951 Combination Box with Solenoid Patent 7,686,093 - Dual Extinguishment fire suppression system using high velocity low pressure emitters. oreign patents
More informationStainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)
The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless
More information11.02 Mechanical-T Bolted Branch Outlets
STLES AND SEE ICTAULIC PUBLICATION 10.01 FOR DETAILS NIIPO ictaulic Mechanical-T Outlet provides a direct branch connection at any location a hole can be cut in pipe. The hole is cut oversize to receive
More informationVic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730
Series 730 Vic-Strainer is lighter than flanged Y type strainers and provides straightthrough flow for lower pressure drop. It installs with two Victaulic couplings, and is rated up to 750 psi/5175 kpa
More informationThe applicable material specifications for ductile iron and rubber gaskets apply:
72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures
More informationVictaulic Suction Vibration Isolation Pump Drop Series 337 Korea Only
Victaulic Suction Vibration Isolation Pump Drop Series 337 Korea Only 2.37 1.0 PRODUCT DESCRIPTION Available Sizes 3 12"/DN80 DN300 Maimum Working Pressure Rated to the working pressure of the PN/PN16
More informationFireLock NXT Deluge Valve. With Deluge Trim Grooved x Grooved. System No. Submitted By Spec Sect Para Location Date Approved Date
MEA: 248-98-E CSFM: 7770-0531-117 The patent-pending Victaulic Series 769 FireLock NXT controls the water supply entry into the deluge system piping and open sprinklers. The Series 769 is a low differential,
More informationOperators: Lever Handle: 1 1/2 3"/40 80 mm Carbon steel, zinc plated, plastic grip. 4 & 6"/100 & 150 mm Carbon steel, enamel paint
The Series 726 is a high-pressure standard port ball valve with grooved ends. This twopiece, end-entry valve features a floating ball for lower torque requirements. Series 726 valves are NACE compliant
More informationSeries 751 FireLock European Alarm Check Valve Stations
R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series FireLock European Alarm Check Valve Stations Grooved X Grooved 0.0 VICTAULIC IS AN ISO 00 CERTIFIED COMPANY PRODUCT DESCRIPTION The Victaulic Series
More informationSeries 758 FireLock Actuated System Valve
R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series 58 FireLock Actuated System Valve With Deluge Trim Grooved X Grooved and Flanged X Grooved 30.04 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT
More informationSection 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
More information30.85 FireLock NXT Actuated Valve with LPCB Approved Preaction Trim
Actuated Valve with LPCB Approved Preaction Trim 104g/01 with: - Electric Activation with Redundant Solenoid Valve - Electric Activation with Redundant Solenoid Valve and AutoConvert Dry Trim - Double
More informationSeries 756 FireLock Dry System Check Valve
R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series FireLock Dry System Check Valve Grooved X Grooved and Flanged X Grooved 0.0 VICTAULIC IS AN ISO 900 CERTIFIED COMPANY PRODUCT DESCRIPTION The Victaulic
More informationEMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly
EMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly from our suppliers. aquamine pvc piping products Victaulic
More informationPressfit System for Carbon Steel Pipe
R PRESSFIT SYSTEM FOR ARBON STEEL PIPE Pressfit System for arbon Steel Pipe 12.02 VITALI IS AN ISO 9001 ERTIFIED OMPANY PRODT DESRIPTION L FM L See Victaulic publication 10.01 for details. The Pressfit
More informationStyle 99 Roust-A-Bout Couplings
R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings
More informationStyle 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
More informationGRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
More informationIMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS. ANSI # 150.
IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS.. The information contained in this publication is intended as a guide to customers, and is freely given in good faith. Whilst every care has been
More informationMechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications
82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationSection 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationPPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS
PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS 1 Pahang Pipe Fittings PPF is one of the leading manufacturers of Buttweld fittings and flanges. Our highly specialized product range is capable of catering
More information24.01 Pipe Preparation Tool Specifications
VE0 VAPS172 The distinguishing feature of the Victaulic grooved mechanical piping system is, as the name implies, a groove where the pipe and fitting engage to form a self-restraining joint. The position,
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationSeries 769 FireLock NXT Deluge Valve
IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series 79 FireLock NXT Deluge Valve With Deluge Trim Grooved X Grooved 30.81 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The patent-pending
More informationd z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
More informationSeries 709 Butterfly Valves (175 psi/1270 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series 709 Butterfly Valves (175 psi/1270 kpa) 08.03 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 709 grooved end butterfly valve offers
More informationI-799/79V Coil Components
WARNING Read and understand all instructions before attempting to install any Victaulic products. Depressurize and drain the piping system before attempting to install, remove, or adjust any Victaulic
More informationSeries 706 Butterfly Valves (300 PSI/2065 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series 706 Butterfly Valves (300 PSI/2065 kpa) 08.17 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 706 grooved end butterfly valve offers
More informationSeries W709 AGS Butterfly Valves (175 psi/1270 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series W709 AGS Butterfly Valves (175 psi/1270 kpa) 20.07 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W709 AGS (Advanced Groove System)
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More information08.12 Vic-Plug Balancing Valve
Series 377 Vic-Plug balancing valve is the only eccentric grooved end plug valve made specifically for throttling services. For 3 12"/80 300 systems, Victaulic Style 307 transition couplings are available
More informationCM Body Assembly Service Parts List CM 93 and CM 04 Body Styles
Document Number Issue Date 12/01/93 Rev. Date 5/11/18 CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles Body Style Identification Pump Material Body Style Pumps Built After 2004 Pumps Built
More information08.20 VIC -300 MasterSeal Butterfly Valves
CRBON STEEL PIPE - GROOVED VLVES Vic -300 MasterSeal butterfly valves are designed for pressures ranging from full vacuum to 300 psi/2065 kpa and for bi-directional, dead end services to full working pressure.
More informationSeries W706 AGS Butterfly Valves (300 PSI/2065 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) 20.06 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W706 AGS (Advanced Groove System)
More informationEarthwool 1000 Pipe Insulation
Nesting Chart CI-PE-NC 12-1 Earthwool 1000 Pipe Insulation Dimensional Data Nesting Chart Single Layer Insulation O.D. Single Layer Dimensional Data Pipe Size ½" 1" 1½" 2" 2½" 3" 3½" 4" 4½" " 6" ½" 0.840"
More informationReference Data. Schedule 40 Steel Pipe Data. Schedule 80 Steel Pipe Data
Schedule 40 Steel Pipe Data Maximum Recommended Pipe Size Pipe O.D. Thickness Weight of Pipe Filled With Water Span* Hanger Rod Ft. Meter Sizes 3/8" (10).675 (17.1).091 (2.3).6 (.9).7 (1.0) 7 (2.13) 3/8"-16
More informationKEY PORT VALVE SERIES 400 ECCENTRIC VALVES Compact Size. Light Weight. UL Listed. AGA and CGA Approved. Bulletin
KEY PORT VALVE SERIES 400 ECCENTRIC VALVES Compact Size Light Weight UL Listed AGA and CGA Approved Key Port Valve is a unit of SMG Southern Manufacturing Group, Inc. UL Listed CGA and AGA Approved Bulletin
More informationSECTION 1 Grooved Fittings
Anvil offers two different sets of stainless steel fittings. The Gruvlok Series Fittings have full flow designs formed from type 304SS pipe. The Schedule 10 fittings are fabricated from segmentally welded
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationCOPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS Job Name Job Location Engineer Contractor Wholesaler Streamline Rep Product Description: Streamline Wrot Copper Pressure and DWV fittings for use
More informationButt Welding Fittings ASME Standards
18 Butt Welding Fittings ASME Standards Standard Grades according ASTM A / ASME SA403, 304/L and 316/L (dual marked and certified), ASME B16.9, annealed and quenched, bevelled ends to ASME B16.25, hardness
More informationGrinnell Grooved Fire Protection Products Grooved Fittings
Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical
More informationSUBMITTAL PACKAGE FIRE PROTECTION VALVES
SUBMITTAL PACKAGE FIRE PROTECTION VALVES Butterfly Valves Ductile Iron Grooved...pg 2-5 Grooved Check Valves...pg 6-8 OS&Y Valves...pg 9-12 ARGCO.com 800-854-1015 Updated 2/27/2017 ARGCO GROOVED BUTTERFLY
More informationFlowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic
More informationSUGGESTED SPECIFICATIONS Pump Frames NS3 thru OMC5
SOLIDS-HANDLING WASTEWATER PUMPS Pump Frames NS3 thru OMC5 GENERAL Furnish and install Vertical Closed-Shaft Wet-Pit Pumping Units complete with all accessories and appurtenances as shown in the plans
More informationFlowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 VF114R1 VF115R1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either
More informationFlowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic
More informationFIG Gruvlok Flange Adapter
FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method
More informationVic -300 Butterfly Valves
R IPS RON STL PIP ROOV VLVS 08.0 Vic -300 utterfly Valves PROUT SRIPTION ear Operator 3" with Position andle Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 PSI (065 kpa).
More information' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts
.., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED
More informationUNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
More informationHigh Pressure 2-way 2 1/2-6 Globe Valves
Overview Datasheet High Pressure 2-way 2 1/2-6 Globe Valves Designed to work with either an electronic actuator with a 3/4-inch (20 mm) or 1-1/2-inch (40 mm) stroke, the two-way globe valves are available
More informationUNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
More informationAdvantages of Grooved Fittings
Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationA-C Fire Pump. Fitting and Accessories A-C 100A
A-C Fire Pump Fitting and Accessories A-C 100A A-C Fire Pump Fitting and Accessories Table of Content Page Automatic Air Release Valve... 1 Suction And Discharge Gauge Assembly... 2 Casing Relief Valve...
More informationReturn not FoR ReSale Next Page
Not For Resale 10.06 TRUSTED FOR 150 YEARS We built our reputation from the ground up. Anvil s history stretches back to the mid1800s, when a company named Grinnell began providing its customers with the
More informationGrooved Fire Protection. Installation Handbook
Grooved Fire Protection Installation Handbook October 2016 Grooved Fire Protection Installation Handbook OCTOBER 2016 IH-1000FP Worldwide Contacts www.tyco-fire.com GLOBAL HEADQUARTERS 1400 Pennbrook
More informationKEY PORT SERIES 400 ECCENTRIC VALVES. Compact Size. Light Weight. UL Listed. CSA Certified. CSA Certified. UL Listed
KEY PORT SERIES 400 ECCENTRIC VALVES Compact Size Light Weight UL Listed CSA Certified Bulletin 11.00-1 September, 2006 UL Listed CSA Certified A Unit of Southern Manufacturing Group, Inc. Design & Construction
More informationKEY PORT SERIES 400 ECCENTRIC VALVES. Compact Size. Light Weight. UL Listed. CSA Certified. CSA Certified. UL Listed
KEY PORT SERIES 400 ECCENTRIC VALVES Compact Size Light Weight UL Listed CSA Certified Bulletin 11.00-1 September, 2006 UL Listed A Unit of Southern Manufacturing Group, Inc. CSA Certified Design & Construction
More informationFireLock NXT Actuated Valve with Preaction Trim. System No. Submitted By Spec Sect Para Location Date Approved Date
VNIIPO ME: 248-98-E CSFM: 7770-0531-117 The patent-pending Victaulic Series 769 FireLock NXT Preaction Valve controls the water supply entry into the Preaction system piping and sprinklers. The Preaction
More informationTUBE & FITTINGS. Mechanical Jointing System for joining Large Diameter Copper Tubing TECHNICAL BULLETIN D41/03
TUBE & FITTINGS Mechanical Jointing System for joining Large Diameter Copper Tubing TECHNICAL BULLETIN D41/03 A whole new way to join copper tubing Fast and easy to assemble No gas bottle required No waiting
More informationVictaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)
Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationCONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY DISTRIBUTION ENGINEERING NON-NETWORK SYSTEMS
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY 10003 DISTRIBUTION ENGINEERING DEPARTMENT NON-NETWORK SYSTEMS SPECIFICATION EO-100186 REVISION #10 MAY 2007 EFFECTIVE DATE MAY
More informationALUMINUM DISTRIBUTING, INC S.W. 2nd Ave. Ft. Lauderdale, FL Table of Contents
Table of Contents Page 2.........Equal & Unequal Angle Structural & Architectural Page 3.......................Flat Bar Structural Page 4.....................Flat Bar Architectural Page 5..... U Channel,
More informationFactory address: Mola sadra st., Abooreyhan st Eshtehard Industrial Town, TEHRAN/ IRAN
z d Le mm equiv inch Le r 1) z z Le L 110 5 2 5 5 8 2 Elbow d 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
More informationDimensional Data Nesting Chart Earthwool
Nesting Chart CI-PE-NC 12-1 Dimensional Data Nesting Chart Earthwool 1000 Insulation 22 Dimensional Data Nesting Chart Insulation O.D. Single Layer Dimensional Data ½" 1" 1½" 2" 2½" 3" 3½" 4" 4½" " 6"
More informationSection 2 - BUSLIGN Fittings For Rigid Busbar
POWERFORMED Substations atalogue: Section Section - USLIGN Fittings For Rigid usbar USLIGN Fittings For Rigid usbar Table of ontents Sec/Page Table of ontents Sec/Page Endcaps usbar End aps (Weld-on)...
More informationFlowrite 599 Series High Pressure Close-Off 2-Way Valves, 2-1/2 to 6-Inch, Flanged Iron Body, ANSI Classes 125 & 250
Document Number 155-758 Flowrite 599 Series High Pressure Close-Off 2-Way s, 2-1/2 to 6-Inch, Flanged Iron Body, ANSI Classes 125 & 250 Description Features Application The Flowrite 599 Series High Pressure
More informationKEY PORT SERIES 400 ECCENTRIC VALVES
ISO 9001:2008 Certified QMS KEY PORT SERIES 400 ECCENTRIC VALVES The valve of choice for over 50 years. Now that s dependability! Compact Size Light Weight UL Listed Proven Design Bulletin 11.00-1 August,
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationPRESSURE REDUCING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationBerkeley 8T-550 Submersible Turbine
Berkeley 8T-55 9 3 Nominal RPM: 345 Maximum Working Pressure: 485 PSI 1 8 27 3 HP 9 7 24 25 HP 8 6 21 2 HP 7 5 4 3 18 15 12 9 15 HP 1 HP 6 5 4 3 Efficiency % 2 6 2 1 3 1 1 2 3 4 5 6 7 8.19" (with 6" mtr.)
More informationB NPT. Dimensions Inches/millimeters
R IPS CARON ST PIP GROOVD ACCSSORIS Series 731-G Suction Diffuser 09.14 VICTAUIC IS AN ISO 9001 CRTIFID COMPANY PRODUCT DSCRIPTION Victaulic Series 731-G Suction Diffuser provides optimum flow conditions
More informationIron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
More informationI-731-D/W731-D. Suction Diffuser. Important Installation Information. series 731-D and W731-D
Important Installation Information WARNING Read and understand all instructions before attempting to install, remove, adjust, or maintain any Victaulic piping products. Depressurize and drain the piping
More informationPRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
More informationAMES 2016 Price List. Backflow Prevention Products and Repair Kits and Parts. Effective February 29, 2016
AMES 2016 Price List Backflow Prevention Products and Repair Kits and Parts Effective February 29, 2016 All prices supersede previous issues, are temporary and subject to change without notice. AmesFireWater.com
More information