Model C10 / C11 / C20 / C60 Grooved Fitting For Copper Tubing Nominal Pipe Pipe C10 90 o Elbow C11 45 o Elbow C20 Tee C60 Cap
|
|
|
- Clarissa Rosemary Chandler
- 6 years ago
- Views:
Transcription
1 GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloy C89836* Bismuth copper alloy per ASTM B584. Materials meet the requirement for potable water service applications. Shurjoint fittings are designed for use with Shurjoint CTS couplings, components and ASTM B-88 roll grooved copper tubing type K, L, M and ASTM B-306 DWV. Full warranty terms can be found on MODEL C10 90 o ELBOW (CAST) C11 45 o ELBOW (CAST) C20 TEE (CAST) C60 CAP (CAST) Model C10 / C11 / C20 / C60 Grooved Fitting For Copper Tubing Nominal Pipe Pipe C10 90 o Elbow C11 45 o Elbow C20 Tee C60 Cap Size C-E Weight C-E Weight C-E Weight E-E Weight in in in Lbs in Lbs in Lbs in Lbs mm mm mm Kgs mm Kgs mm Kgs mm Kgs ½ /5 Rev.J
2 MODEL C21 REDUCING TEE (GR X GR X GR) (CAST) C50 CONCENTRIC REDUCER (GR X GR) (CAST) Model C21 Reducing Tee / C50 Concentric Reducer Nominal Pipe Pipe C21Reducing Tee C50 Concentric Reducer Size C-E Weight E-E Weight in in in Lbs in Lbs mm mm mm Kgs mm Kgs 2½ x x x x x x x x x 2½ x x x x x x x x 2½ x x x x x x x x x x x x x x x x 2½ x x x x x x x x x x x x x x x /5 Rev.J
3 MODEL C26 REDUCING TEE (GR X GR X CUP) (CAST) C52 CONCENTRIC REDUCER (GR X CUP) (CAST) Model C26 Reducing Tee / C52 Concentric Reducer Nominal C26 Red. Tee (Gr XGr x Cup) C52 Conc. Reducer (Gr X Cup) Size C-E C-B Cup Weight E-E Cup Weight in in in in Lbs in in Lbs mm mm mm mm Kgs mm mm Kgs 2 x 2 x ¾ x 50 x x 2 x x 50 x x 2 x 1¼ x 50 x x 2 x 1½ x 50 x ½ x 2½ x ¾ x 65 x ½ x 2½ x x 65 x ½ x 2½ x 1¼ x 65 x ½ x 2½ x 1½ x 65 x ½ x 2½ x x 65 x x 3 x ¾ x 80 x x 3 x x 80 x x 3 x 1¼ x 80 x x 3 x 1½ x 80 x x 3 x x 80 x x 4 x ¾ x 100 x x 4 x x 100 x x 4 x 1¼ x 100 x x 4 x 1½ x 100 x x 4 x x 100 x /5 Rev.J
4 MODEL C55 TRANSITION ADAPTER (IPS X CTS) The Model C55 Transition Adapter provides for a direct transition between male threaded-end steel pipe (IPS) and grooved-end copper tubing. The C55 is UL classified to NSF/ANSI 61 and NSF/ANSI 372 for use in potable water systems. Model C55 Transition Adapter Actual Pipe Nominal Pipe Size IPS (NPT) x CTS (GRV) Steel Pipe (IPS) Copper Tubing (CTS) D E - E Weight in in in in Lbs mm mm mm mm Kgs 1½ x x x x ½ x 2½ x x x MODEL C55T TRANSITION ADAPTER (IPS/FT X CTS/GR) WITH ¼ " TAPS The Model C55T Transition Adapter with ¼ taps provides for a direct transition between male threaded-end steel pipe (IPS) and grooved-end copper tubing. Allows for the installation of gauges or Pete s Plugs for measuring temperature and or pressure. Model C55T Transition Adapter Nominal Pipe Size IPS (NPT) x CTS (GRV) Steel Pipe (IPS) Copper Tubing (CTS) D E - E Weight in in in in Kgs mm mm mm mm Lbs 1½ x x x x ½ x 2½ x x x /5 Rev.J
5 MODEL DE30-GG DIELECTRIC TRANSITION FITTING (IPS X CTS) The Model DE30-GG Dielectric Transition Fitting provides a direct transition between a grooved-end steel pipe (IPS) and grooved end copper tubing. The fittings internal lining effectively eliminates galvanic local cell and stray current problems. The Model DE30-GG is designed for use at temperatures from -40 o F to 230 o F (-40 o C to 110 o C) and pressures up to 300 psi (20 bar). Material Specifications: Housing: Ductile Iron conforming to ASTMA536, electro-deposition coated. Liner: Virgin polypropylene toastm D4101. Model DE30-GG Dielectric Transition Fitting Size Steel Pipe Nominal Actual Pipe Copper Tubing E-E Weight in in in in Lbs mm mm mm mm Kgs ½ General Notes: Standard Fitting Pressure Ratings conform to the working pressure of the coupling used to join the system. Listed and or Approved Pressures are pressure ratings for fire protection systems, tested and approved by various approval bodies. Please always refer to the latest approval data posted on the Shurjoint website. Field Joint Test: For one time only the system may be tested hydrostatically at 1½ times the maximum working pressure listed (AWWA C ). Warning: Piping systems must always be depressurized and drained before attempting disassembly and or removal of any components. The 10 Year Limited Warranty applies to manufacturing defects only and does not cover severe service/temperature applications or wear parts. Shurjoint reserves the right to change specifications, designs and or standard without notice and without incurring any obligations. -5/5 Rev.J
GROOVED FITTINGS FOR COPPER TUBING
GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloys C90500 and or C89836* Bismuth copper alloy per ASTM
The applicable material specifications for ductile iron and rubber gaskets apply:
72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures
Model 7706 Reducing Coupling. Deg. Axial Displacement
MODEL 7706 REDUCING COUPLING The Model 7706 Reducing allows direct reduction on a piping run and eliminates the need for a concentric reducer and couplings. The specially designed rubber gasket prevents
Section 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
*Applies to 6 x 4" No. 650 Reducer only. C to E. No No º Elbow Approx. Wgt. Each Lbs. kg. C to E Inches mm JOB/OWNER CONTRACTOR ENGINEER
SEE VITAULI PULIATION 0.0 FOR DETAILS TS fittings for use with Style 606 copper connection couplings or Style 64 Vic-Flange Adapters. Fittings are full flow, standard radius wrought copper supplied roll
Style 99 Roust-A-Bout Couplings
R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings
SJ-300N. Model SJ-300N-L Butterfly Valve with Lever Handle Max. Working Pressure (CWP)* PSI Bar Dimensions A B C D E in.
SJ-N MODEL SJ-N BUTTERFLY VALVE The Model SJ-N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a -position lever
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION TESTING AND DESIGN SPECIFICATIONS (PER AWWA C502 / NSF /ULC & FM) 1. Hydrant shall be manufactured in accordance with AWWA C502 latest revision
STAINLESS STEEL SYSTEMS
STAINLESS STEEL SYSTEMS 139 Systems Table of Contents Figure 472 Rigid Couplings Page 142 Figure 401 45 Elbows Page 149 Figure SS-7X Rigid Couplings (Large Diameter) Page 143 Figure 405 Flexible Couplings
Housing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The patented Style 107H rigid coupling joins 8"/50 200 standard roll grooved and cut grooved steel pipe.* The joint is assembled without disassembling the bolts,
QuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS
H ONL. SEE PAGE 4 FOR DETAILS. The patented Style 107 rigid coupling joins 12"/50 300 standard roll grooved and cut grooved steel pipe. The joint is assembled without disassembling the bolts, nuts, gasket
Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The Style 177 QuickVic flexible coupling is installation-ready, and joins 2-8"/50-200 standard roll grooved and cut grooved steel pipe. The coupling's unique
SJ-300N J-04. Model SJ-300N-L Butterfly Valve with Lever Handle
SJ-300N J-04 MODEL SJ-300N BUTTERFLY VALVE The Model SJ-300N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a
Valves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
M&H AWWA C508 STANDARD SWING CHECK VALVES
GENERAL M&H AWWA C508 STANDARD SWING CHECK VALVES Style 59-02 plain / 159-Lever & Weight / 259-02 Lever & Spring Sizes 2 Through 36 Water / Sewage Service M&H Swing Check valves are widely specified by
GRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
Size Inches UL ULC FM. Pipe Sch.
IPS CARBON STEEL PIPE - FIRE PROTECTION PRODUCTS FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) FireLock Style 005 rigid coupling has a unique, patented angle-pad design
GENERAL FEATURES / SPEC M&H AWWA C502 FIRE HYDRANTS Style 929 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approval Type: Compression type, opening against line pressure.
Lenntech Tel Fax
SEE VICTAULIC PUBLICATIO.01 FOR DETAILS Style 99 Roust-A-Bout couplings are designed with heavy housings and grips to provide a strong component for joining plain and beveled end, including Schedule steel
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
M&H AWWA C508 STANDARD SWING CHECK VALVES
GENERAL M&H AWWA C508 STANDARD SWING CHECK VALVES Style 59-02 plain / 159-Lever & Weight / 259-02 Lever & Spring Sizes 2 Through 36 Water / Sewage Service M&H Swing Check valves are widely specified by
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)
Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings
INTRODUCTION. General Notes
INTRODUCTION Thank you for selecting a Shurjoint product. This manual covers the proper installation and assembly procedures for your product. To ensure the proper installation, assembly and performance
Vic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730
Series 730 Vic-Strainer is lighter than flanged Y type strainers and provides straightthrough flow for lower pressure drop. It installs with two Victaulic couplings, and is rated up to 750 psi/5175 kpa
SDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI) MINIMUM WALL (IN.) 20 LENGTH. 1.5" 1.900" N/A N/A N/A.090" ".419 lbs..415 lbs.
u ASTM D2241 PRESSURE PIPE Gasketed Pipe Specifications Northern Pipe Products ASTM D2241 IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784.
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
TEXAS UNITED PIPE INC.
TEXAS UNITED PIPE INC. CERTIFICATIONS SPECIFICATIONS & LOADING CHARTS For PVC Pipe Manufactured by Texas United Pipe Inc. P.O. Box 41067 11627 North Houston Rosslyn Houston, Texas 77241 SALES DEPARTMENT
Precision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
Grinnell Grooved Fire Protection Products Grooved Fittings
Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
The SWL Series Swing Check Valves Meets AWWA C Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution
The Series Meets AWWA C-508-01 Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick,
Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
PRESSURE REDUCING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
September 2012 / M&H C502 / Model 129
GENERAL FEATURES / GENERAL SPEC M&H AWWA C502 FIRE HYDRANTS Model 129 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approved Type: Compression type, opening against line
Ford Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
According to AWWA-standard
According to -standard Water Fire fighting - UL/FM 304 Gate valves - Cast iron 320 Gate valves OS&Y 306 Service connection valves 322 Post indicators 306 Combi valves 307 Gate valves - 310 Gate valves
IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS. ANSI # 150.
IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS.. The information contained in this publication is intended as a guide to customers, and is freely given in good faith. Whilst every care has been
PRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
REQUEST PUBLICATION 18.11
* SEE VICTALIC PBLICATION 10.01 FOR DETAILS The Victaulic Pressfit 316 System for joining approved Type 316/316L stainless steel pipe provides a fast, easy, clean, reliable means for joining ½"/15, ¾"/
Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)
The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless
TAPPING & SERVICE SADDLES
TAPPING & SERVICE SADDLES The Standard of Excellence in the Industry CS12 CSC1 CS22 CSC2 CNS1 CDS1 CNS2 CDS2 CFS CFT-TO 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630)
SOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
ALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
Ford Service Saddles and Tapping Sleeves
Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171
DIMENSIONS (approximate)
Page 1 of 8 a NRS GATES OS&Y GATES company Model 48 Resilient Wedge Gate Valve SPECIFICATION SUBMITTAL SHEET FEATURES Sizes: 2 1/2" 3" 4" 6" 8" 10" 12" Maximum working water pressure 200 PSI Maximum working
SEE VICTAULIC PUBLICATION FOR DETAILS
dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile
Pipe Size Pipe OD TwinSeal Hinged Design for IPS PVC Pipe MODEL 3402 BRONZE SADDLE FOR COPPER TUBING
MULTIPLIER SERVICE SADDLES MODEL 3401 BRONZE SADDLE FOR IPS PVC BODY CASTINGS: Waterworks Bronze (85-5-5-5) per ASTM B584 and AWWA C800. FASTENERS: Silicon Bronze per ASTM B98. GASKET: Patented SBR TwinSeal
General Price List Main effective MAY 13, General Price List. Main
General Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully searchable product and project databases
Mechanical Piping.
Mechanical Piping www.anvilintl.com JULY 2016 For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com BUILDING CNNECINS HA LAS For over 160 years,
MODULATING FLOAT CONTROL VALVE
PROJECT NAME LOCATION MODULATING FLOAT CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
11.02 Mechanical-T Bolted Branch Outlets
STLES AND SEE ICTAULIC PUBLICATION 10.01 FOR DETAILS NIIPO ictaulic Mechanical-T Outlet provides a direct branch connection at any location a hole can be cut in pipe. The hole is cut oversize to receive
FLOAT CONTROL VALVES
PROJECT NAME LOCATION FLOAT CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 8 in. (200 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
EMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly
EMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly from our suppliers. aquamine pvc piping products Victaulic
COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
UNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation
Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug
GD N (not shown) No Switches. GD N Grooved 2¹ ₂", 3", 4", 6", 8", 10"
300 PSI WWP UL/FM Butterfly Valves Designed for normally open position monitoring Elastomer Encapsulated Disc Accepts Internal Supervisory Switches Compatible with IPS Pipe 300 PSI/20.7 Bar Non-Shock Cold
AWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts
.., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED
Compression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
Series 751 FireLock European Alarm Check Valve Stations
R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series FireLock European Alarm Check Valve Stations Grooved X Grooved 0.0 VICTAULIC IS AN ISO 00 CERTIFIED COMPANY PRODUCT DESCRIPTION The Victaulic Series
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.
Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3
HP250II AND HP250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901
H250II AND H250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS RATT H250II Scope of Line... 1 Design and Construction Details... 1 ipe Mating Chart... 1
CTS WATER SERVICE TUBING - BLACK
CTS WATER SERVICE TUBING - BLACK Section 1 Cts Water Service Tubing shall be PE 3408 Resin listed in PPI TR4, MSF Standard 14 and NSF Standard 61, AWWA C901, ASTM D 2737, Cell classification per ASTM D
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
Reference Data. Schedule 40 Steel Pipe Data. Schedule 80 Steel Pipe Data
Schedule 40 Steel Pipe Data Maximum Recommended Pipe Size Pipe O.D. Thickness Weight of Pipe Filled With Water Span* Hanger Rod Ft. Meter Sizes 3/8" (10).675 (17.1).091 (2.3).6 (.9).7 (1.0) 7 (2.13) 3/8"-16
Clampette Products Global sourcing. National compliance. Local service.
Clampette Products C a l i f o r n i a T e x a s N e w Y o r k Patch Clamps Clampette is a United States manufacturer of stainless steel pipe repair clamps. We take great pride in the manufacturing and
B NPT. Dimensions Inches/millimeters
R IPS CARON ST PIP GROOVD ACCSSORIS Series 731-G Suction Diffuser 09.14 VICTAUIC IS AN ISO 9001 CRTIFID COMPANY PRODUCT DSCRIPTION Victaulic Series 731-G Suction Diffuser provides optimum flow conditions
Smith-Blair OMNI Coupling System Advantages:
OMNI Coupling System SmithBlair s OMNI Coupling System utilizes the tremendous tensile strength of ductile iron to your best advantage. Applying the principles of space age technology to engineer the OMNI
FIRE SPRINKLER EQUIPMENT SUBMITTAL
Fire Systems West, Inc. 206 FRONTAGE ROAD NORTH, SUITE C PACIFIC, WA 98047 (253) 833-1248 FIRE SPRINKLER EQUIPMENT SUBMITTAL FOR Being 4-20-21 VPAL MAINTENANCE SHED AND SUBSTATION FSW JOB NO. 02-11-11013
Compression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
Utilities Catalog. PC-U2008, February, 2008
Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page
BLUE ULTRA Pipe & Tubing contains no regrind resin in its manufacture
BLUE ULTRA is extruded using current state of the art 100% pure PE4710 virgin resin with decades of successful history - no extra wall thickness is required to retain its extreme level of UV protection
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
MACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number:
ACROMACROMACROMA MACRO HP ROMAC S SECOND GENERATION TWO-BOLT E X T E N D E D R A N G E C O U P L I N G NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes patent number: 8448993 BMACROHP
Ford Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
Customer Service : Tel Toll-free Fax
Table Of Contents Terms and Engineering Data...2 Lead-Free Brass Ball Valves...3-4 TFP600-LF Full port, 2-piece body, lead-free, Threaded Ends...3 SFP600-LF Full port, 2-piece body, lead-free, Solder Ends...4
FIRE PROTECTION PRODUCTS
FIRE PROTECTION PRODUCTS Rev.0119 6 info@ayvaz.com www.ayvaz.com 1 FIRE PROTECTION PRODUCTS ANGULAR EXPANSION JOINTS GIMBAL TYPE SEISMIC EXPANSION JOINTS Bellow Material Stainless Steel AISI 321 (Opt.
Carbon Steel Nipples
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications
Section G 01/2018 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Curb Stops and Meter Valves
DQS Inc. Section G 01/2018 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10002505 Ford Curb Stops and Meter Valves Contents Page Information Product ing System...3 Features of Ball Valves...4....5
COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS Job Name Job Location Engineer Contractor Wholesaler Streamline Rep Product Description: Streamline Wrot Copper Pressure and DWV fittings for use
Anti Siphon Ballcock RP Anti-Siphon Ballcock
UR PS1115 Effective November 1, 2015 (SUPERCEDES PS0514 ) The issuance of this price list is not an offer to sell the goods listed herein at the prices stated. Anti Siphon Ballcock 109-603RP Anti-Siphon
Mueller Super Centurion 250 Fire Hydrant
Mueller Super Centurion 250 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 250 Fire Hydrant...250 psig rating, high flow, dependable performance,
PVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
ARBON STL PIP - GROOVD FITTINGS Grooved nd Fittings S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles.
Series 756 FireLock Dry System Check Valve
R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series FireLock Dry System Check Valve Grooved X Grooved and Flanged X Grooved 0.0 VICTAULIC IS AN ISO 900 CERTIFIED COMPANY PRODUCT DESCRIPTION The Victaulic
SECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
Ultra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
FIRE PROTECTION PRODUCTS
SUPER CENTURION FIRE HYDRANT Mueller Super Centurion Fire Hydrant Since its introduction in 1976, millions of Centurion fire hydrants have been installed throughout North America. There are a number of