Size Inches UL ULC FM. Pipe Sch.

Size: px
Start display at page:

Download "Size Inches UL ULC FM. Pipe Sch."

Transcription

1 IPS CARBON STEEL PIPE - FIRE PROTECTION PRODUCTS FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) FireLock Style 005 rigid coupling has a unique, patented angle-pad design which allows the housings to offset while clamping the grooves. By permitting the housings to slide on the angled bolt pads, rigidity is obtained. Support and hanging requirements correspond to NFPA 13 Sprinkler Systems. Angle-pad design permits assembly by removing one nut/bolt and swinging the housing over the gasket. This reduces components to handle during assembly. Style 005 FireLock coupling are designed and recoended for use ONLY on fire protection systems. Vic-Plus Gasket System: In North America, Victaulic offers a gasket system which requires no field lubrication on wet pipe systems that are hydrostatically tested. The Vic-Plus System (patented) is dry, clean, and non-toxic. It reduces assembly time substantially and eliminates the mess and chance of overlubrication. Please refer to the latest copy of the Victaulic Field Installation Handbook (I-100) for supplemental lubrication requirements and dry pipe fire protection system notes LPC and VdS Approved, see notes on page 4 SEE VICTAULIC PUBLICATION FOR DETAILS PATENTED Exaggerated for clarity LISTING/APPROVALS The information provided below is based on the latest listing and approval data at the time of publication. Listings/Approvals are subject to change and/or additions by the approvals agencies. Contact Victaulic for performance on other pipe and the latest listings and approvals. Related Working Pressure psi Related Working Pressure psi Related Working Pressure psi Pipe Sch. UL ULC FM Pipe Sch. UL ULC FM Pipe Sch. UL ULC FM 5 1 1/ EL 1 1/ N/A N/A MT 1 1/ N/A N/A 1 1/ ET 1 1/ N/A N/A STF 1 1/4 4 N/A N/A , EZ # N/A 300 Steady Thd. 1 1/4 2 N/A N/A 300 BLT 1 1/ N/A FF 1 1/4 4 N/A N/A 300 TF 3 8 N/A N/A 300 DF 1 1/ GAL / N/A N/A WLS 1 1/ N/A DT 1 1/ N/A MLT 1 1/ N/A N/A XL 1 1/ EF 1 1/ 4 175@ N/A 175 MF 1 1/ N/A 300* * FM approved for service in 1 1/2 4" pipe. # UL Listed for service up to 4" pipe UL Listed for service up to 3" only. JOB/OWNER CONTRACTOR ENGINEER System No. Submitted By Spec Sect Para Location Date Approved Date VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_J 10.02_1

2 IPS CARBON STEEL PIPE - FIRE PROTECTION PRODUCTS FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) DIMENSIONS Y X Rated for wet and dry sprinkler systems at 350 psi/2413 kpa for 1 1/4 4"/ sizes and 300 psi /2068 kpa for 4 1/4 8"/ sizes; Schedule 10 roll grooved or Schedule 40 cut or roll grooved steel pipe. Style 005 is rigid and does not accoodate expansion, contraction or angular deflection. Z Nominal / Actual Outside Diameter / Max. Work Pressure * PSI kpa Max. End Load * N Allow. Pipe End Sep. Bolt/Nut@ No Dimensions / X Y Z Approx. Wgt. Each 1 1/ /8 x 2 1/ / /8 x 2 1/ /8 x 2 1/ / /8 x 2 1/ /8 x 2 1/ /8 x 2 1/ /8 x 2 1/ /8 x 2 1/ /2 x /2 x 2 3/ /2 x 2 3/ /2 x /2 x 2 3/ /2 x /8 x 4 1/ kg * Working Pressure and End Load are total, from all internal and external loads, based on standard weight (ANSI) steel pipe, standard roll or cut grooved in accordance with Victaulic specifications. Contact Victaulic for performance on other pipe. WARNING: FOR ONE TIME FIELD TEST ONLY, the Maximum Joint Working Pressure may be increased to 1 1/2 times the figures shown. The allowable pipe separation dimension shown is for system layout purposes only. Style 005 couplings are considered rigid connections and will not accoodate expansion or contraction of the piping Number of bolts required equals number of housing segments. Metric thread size bolts are available (color coded gold) for all coupling sizes upon request. Contact Victaulic for details. Style 005 couplings are VdS and LPC Approved to 12 Bar/175 psi. VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED _2 REV_J

3 IPS CARBON STEEL PIPE - FIRE PROTECTION PRODUCTS FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) MATERIAL SPECIFICATIONS Housing: Ductile iron conforming to ASTM A-536, grade Ductile iron conforming to ASTM A-395, grade , is available upon special request. Housing Coating: Orange enamel (North America); red enamel (Europe) Optional: Hot dipped galvanized Gasket: Grade E EPDM Type A Vic-Plus Gasket System (Violet color code). FireLock products have been Listed by Underwriters Laboratories Inc. and Approved by Factory Mutual Research for wet and dry (oil free air) sprinkler services up to the rated working pressure using the Grade E Type A Vic-Plus Gasket System, requiring no field lubrication for most installation conditions. Grade L Silicone Recoended for dry heat, air without hydrocarbons to +350 F and certain chemical services. For dry services, Victaulic continues to recoend the use of Grade E Type A FlushSeal Gasket. Contact Victaulic for details. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ASTM A-449 and physical requirements of ASTM A-183. Standard gasket and FlushSeal gasket approved for dry pipe systems to 40 F/ 40 C. Based on typical pipe surface conditions, supplemental lubricant is recoended for services installed below 0 F/ 18 C and for all dry pipe systems or systems to be subjected to air tests prior to being filled with water. Supplemental lubrication may also be required on pipe with raised or undercut weld seams or pipe that has voids and/or cracks at the weld seams. Victaulic continues to recoend the use of FlushSeal gaskets for dry services. VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_J 10.02_3

4 IPS CARBON STEEL PIPE - FIRE PROTECTION PRODUCTS FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) GENERAL NOTES WARNING: Depressurize and drain the piping system before attempting to install, remove, or adjust any Victaulic piping products. WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details. NOTE This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. INSTALLATION Reference should always be made to the I-100 Victaulic Field Installation Handbook for the product you are installing. Handbooks are included with each shipment of Victaulic products for complete installation and assembly data, and are available in PDF format on our website at For complete contact information, visit REV J UPDATED 3/2011 VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED

5 CARBON STEEL PIPE GROOVED COUPLINGS Flexible Coupling STYLE SEE VICTAULIC PUBLICATION FOR DETAILS VNIIPO Style 75 is available where moderate pressures are expected or weight considerations are a factor. Up to 50% lighter in weight than the Style 77, the Style 75 coupling is recoended for service up to 500 psi/3450 kpa depending on size. Housings are cast in two identical pieces in all sizes. Hot-dip galvanized and special coatings are available for all sizes. The Victaulic standard flexible coupling offering for grade EHP or T gaskets is the Style 177 installation-ready flexible coupling. For all available sizes, the Style 177 is the standard flexible coupling Victaulic supplies in North America for piping systems using Grade EHP or T gaskets. Contact Victaulic for further details. Exaggerated for clarity MATERIAL SPECIFICATIONS Housing: Ductile iron conforming to ASTM A-536, grade Ductile iron conforming to ASTM A-395, grade , is available upon special request. Housing Coating: Orange enamel. Optional: Hot dipped galvanized and others. Gasket: (specify choice*) Grade E EPDM EPDM (Green color code). Temperature range 30 F to +230 F/ 34 C to +110 C. Recoended for hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with ANSI/NSF 61 for cold +86 F/+30 C and hot +180 F/+82 C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. Grade T nitrile Nitrile (Orange color code). Temperature range 20 F to +180 F/ 29 C to +82 C. Recoended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range; except hot, dry air over +140 F/+60 C and water over +150 F/+66 C. NOT RECOMMENDED FOR HOT WATER SERVICES. * Services listed are General Service Recoendations only. It should be noted that there are services for which these gaskets are not recoended. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service recoendations and for a listing of services which are not recoended. NOTE: Additional gasket styles are available. Contact Victaulic for details. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ASTM A-449 and physical requirements of ASTM A-183. JOB/OWNER CONTRACTOR ENGINEER System No. Submitted By Spec Sect Para Location Date Approved Date VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED.. REV_M 06.05_1

6 CARBON STEEL PIPE GROOVED COUPLINGS Flexible Coupling STYLE DIMENSIONS Nominal Actual Outside Diameter Max. Work Pressure * Max. End Load * psi kpa N Allow. Pipe End Sep. Deflect. Fr. C L Per Cplg. Deg. Bolt/Nut@ No Dimensions / Pipe In./Ft. /m X Y Z /8 x / /8 x / /8 x /8 x / /8 x Approx. Wgt. Each /8 x /2 x 2 3/ / /2 x 2 3/ /2 x 2 3/ x / /8 x 3 1/ /8 x 3 1/ x /8 x 3 1/ /8 x 3 1/ /8 x 3 1/ x /4 x 4 1/ * Working Pressure and End Load are total, from all internal and external loads, based on standard weight (ANSI) steel pipe, standard roll or cut grooved in accordance with Victaulic specifications. Contact Victaulic for performance on other pipe. WARNING: FOR ONE TIME FIELD TEST ONLY, the Maximum Joint Working Pressure may be increased to 1 1/2 times the figures shown. Allowable Pipe End Separation and Deflection figures show the maximum nominal range of movement available at each joint for standard roll grooved pipe. Figures for standard cut grooved pipe may be doubled. These figures are maximums; for design and installation purposes these figures should be reduced by: 50% for 3/4 3 1/2 /20 90 ; 25% for 4 /100 and Number of bolts required equals number of housing segments. Metric thread size bolts are available (color coded gold) for all coupling sizes upon request. Contact Victaulic for details. kg Y Z X VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED _2 REV_M

7 CARBON STEEL PIPE GROOVED COUPLINGS Flexible Coupling STYLE 75 WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details. NOTE This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. INSTALLATION Reference should always be made to the I-100 Victaulic Field Installation Handbook for the product you are installing. Handbooks are included with each shipment of Victaulic products for complete installation and assembly data, and are available in PDF format on our website at For complete contact information, visit REV M UPDATED 2/2011 VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED

8 CARBON STEEL PIPE - HOLE CUT PRODUCTS Mechanical-T Bolted Branch Outlets STYLES AND SEE VICTAULIC PUBLICATION FOR DETAILS VNIIPO Victaulic Mechanical-T Outlet provides a direct branch connection at any location a hole can be cut in pipe. The hole is cut oversize to receive a holefinder locating collar which secures the outlet in position permanently. A pressure responsive gasket seals on the pipe O.D. Cross-type connections can be achieved by utilizing two upper housings of the same style and size, with the same or differing branch size connections. NOTE: Style and Style housings cannot be mated to each other to achieve a cross connection. Style and Style Mechanical-T outlets are available with grooved or female threaded outlet. Specify choice on order. Units are supplied painted with plated bolts. Galvanized housings are available, supplied with plated bolts. All sizes of Style and are rated at 500 psi/3450 kpa working pressure on Schedule 10 and 40 carbon steel pipe. They may also be used on high density polyethylene or polybutylene (HDPE) pipe. Pressure ratings on HDPE are dependent on the pipe rating. Contact Victaulic for ratings on other pipe. Style and are not recoended for use on PVC plastic pipe. Standard piping practices dictate that the Mechanical-T Styles and must be installed so that the main and branch connections are a true 90 angle when permanently attached to the pipeline surface. Additionally, the Vic-Tap II hole cutting tool, which allows for hole cutting capabilities on pressurized systems, utilizes the Style Mechanical-T in conjunction with the Series 726 Vic-Ball Valve to create the Style 931 Vic-Tap II Mechanical-T unit. See page 8 for further information. STYLES AND STYLE CROSS PATENTED MATERIAL SPECIFICATIONS Housing/Coating: Ductile iron conforming to ASTM A-536, grade , with orange enamel coating. Ductile iron conforming to ASTM A-395, grade , is available upon special request. Optional: Hot dipped galvanized Gasket: (Specify choice*) Grade E EPDM EPDM (Green color code). Temperature range 30 F to +230 F/ 34 C to +110 C. Recoended for cold and hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL Classified in accordance with ANSI/NSF 61 for cold +86 F/+30 C and hot +180 F/+82 C. NOT RECOMMENDED FOR PETROLEUM SERVICES. Grade T nitrile Nitrile (Orange color code). Temperature range 20 F to +180 F/ 29 C to +82 C. Recoended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Not recoended for hot water services over +150 F/+66 C or for hot dry air over +140 F/+60 C. *Services listed are General Service Recoendations only. It should be noted that there are s ervices for which these gaskets are not recoended. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service recoendations and for a l isting of services which are not recoended. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ASTM A-449 and physical requirements of ASTM A-183. JOB/OWNER CONTRACTOR ENGINEER System No. Submitted By Spec Sect Para Location Date Approved Date VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_L 11.02_1

9 CARBON STEEL PIPE - HOLE CUT PRODUCTS Mechanical-T Bolted Branch Outlets STYLES AND DIMENSIONS V Y V W GROOVED OUTLET Y FEMALE THREADED OUTLET Provides a direct branch connection at any location where a hole can be cut in the pipe A pressure responsive gasket provides the seal Request Publication for Mechanical-T cross assemblies Pressure rated up to 500 psi/3450 kpa on steel pipe; also available for use with HDPE pipe s from 2 ½"/50 15 through 8 4"/ Important Notes: Style and Style housings cannot be mated to one another to achieve cross connections. T W Z Z Run Branch Nominal Style No. or Max. Work Pressure@ psi kpa Hole Diameter T** V # Thd. Dimensions V Grv. W Y Z 2 1/2 (a) Approx. Weight Each Female Thd. kg 3/4 (a) (a) /4 (a) /2 (a) /2 1/2 (a) /4 (a) (a) /4 (a) /2 (a) /2 (a) /4 (a) (a) /4 (a) /2 (a) /2 (a) /4 (a) (a) /4 (a) (b) /2 (a) (b) (a) / Table continued on pg. 3 ** Center of run to engaged pipe end, female threaded outlet only (dimensions approximate). Available with grooved or female threaded outlet. Specify choice on order. Center of run to end of fitting. # Female threaded outlets are available to NPT and BSPT See page 7 for Fire Protection approvals and pressure ratings. (a) British Standard female pipe threaded outlet is available as listed. Specify BSPT clearly on order. (b) For 76.1 threaded outlet, specify 21/2" BSPT clearly on order. Vds approved for fire protection services LPCB approved for fire protection services Ø Approved for use in China by Tianjin Approvals Company. Grv. kg VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED _2 REV_L

10 CARBON STEEL PIPE - HOLE CUT PRODUCTS Mechanical-T Bolted Branch Outlets STYLES AND DIMENSIONS V Y V W GROOVED OUTLET Y FEMALE THREADED OUTLET Provides a direct branch connection at any location where a hole can be cut in the pipe A pressure responsive gasket provides the seal Request Publication for Mechanical-T cross assemblies Pressure rated up to 500 psi/3450 kpa on steel pipe; also available for use with HDPE pipe s from 2 ½"/50 15 through 8 4"/ Important Notes: Style and Style housings cannot be mated to one another to achieve cross connections. T W Z Z Run Branch Nominal Style No. or Max. Work Pressure@ psi kpa Hole Diameter T** V # Thd. Dimensions V Grv. Table continued from Page 2 W Y Z 4 1/2 (a) Approx. Weight Each Female Thd. kg 3/4 (a) (a) /4 (a) (b) /2 (a) (b) (a) /2 (a) Grv. kg (a) /4 (a) /2 (a) (a) (a) /2 (a) (a) /2 (a) (a) Table continued on pg. 4 ** Center of run to engaged pipe end, female threaded outlet only (dimensions approximate). Available with grooved or female threaded outlet. Specify choice on order. Center of run to end of fitting. # Female threaded outlets are available to NPT and BSPT See page 7 for Fire Protection approvals and pressure ratings. (a) British Standard female pipe threaded outlet is available as listed. Specify BSPT clearly on order. (b) For 76.1 threaded outlet, specify 21/2" BSPT clearly on order. Vds approved for fire protection services LPCB approved for fire protection services Ø Approved for use in China by Tianjin Approvals Company. VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_L 11.02_3

11 CARBON STEEL PIPE - HOLE CUT PRODUCTS Mechanical-T Bolted Branch Outlets STYLES AND DIMENSIONS V Y V W GROOVED OUTLET Y FEMALE THREADED OUTLET Provides a direct branch connection at any location where a hole can be cut in the pipe A pressure responsive gasket provides the seal Request Publication for Mechanical-T cross assemblies Pressure rated up to 500 psi/3450 kpa on steel pipe; also available for use with HDPE pipe s from 2 ½"/50 15 through 8 4"/ T W Z Z Run Branch Nominal Style No. or Max. Work Pressure@ psi kpa Hole Diameter T** V # Thd. Dimensions V Grv. Table continued from Page 3 W Y Z Approx. Weight Each Female Thd. kg 1 1/ /4 (a) (b) /2 (a) (b) (a) Grv. kg (a) (a) /2 (a) (a) Table continued on pg. 5 ** Center of run to engaged pipe end, female threaded outlet only (dimensions approximate). Available with grooved or female threaded outlet. Specify choice on order. Center of run to end of fitting. # Female threaded outlets are available to NPT and BSPT See page 7 for Fire Protection approvals and pressure ratings. (a) British Standard female pipe threaded outlet is available as listed. Specify BSPT clearly on order. (b) For 76.1 threaded outlet, specify 21/2" BSPT clearly on order. Vds approved for fire protection services LPCB approved for fire protection services Ø Approved for use in China by Tianjin Approvals Company. Important Notes: Style and Style housings cannot be mated to one another to achieve cross connections. VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED _4 REV_L

12 CARBON STEEL PIPE - HOLE CUT PRODUCTS Mechanical-T Bolted Branch Outlets STYLES AND dimensions V Y GROOVED OUTLET Y W FEMALE THREADED OUTLET Provides a direct branch connection at any location where a hole can be cut in the pipe A pressure responsive gasket provides the seal Request Publication for Mechanical-T cross assemblies Pressure rated up to 500 psi/3450 kpa on steel pipe; also available for use with HDPE pipe s from 2 ½"/50 15 through 8 4"/ V T W Z Z Run Branch Nominal Style No. or Max. Work Pressure@ psi kpa Hole Diameter T** V # Thd. Dimensions V Grv. Table continued from Page 4 W Y Z Approx. Weight Each Female Thd. kg / /2 (a) (a) Grv. kg (a) Ø (a) (a) /2 (a) (a) (a) ** Center of run to engaged pipe end, female threaded outlet only (dimensions approximate). Available with grooved or female threaded outlet. Specify choice on order. Center of run to end of fitting. # Female threaded outlets are available to NPT and BSPT See page 7 for Fire Protection approvals and pressure ratings.` (a) British Standard female pipe threaded outlet is available as listed. Specify BSPT clearly on order. (b) For 76.1 threaded outlet, specify 21/2" BSPT clearly on order. Vds approved for fire protection services LPCB approved for fire protection services Ø Approved for use in China by Tianjin Approvals Company. Important Notes: Style and Style housings cannot be mated to each other to achieve cross connections. VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_L 11.02_5

13 CARBON STEEL PIPE - HOLE CUT PRODUCTS Mechanical-T Bolted Branch Outlets STYLES AND FLOW DATA 2 Flow test data has shown that the total head loss between point (1) and (2) for the Style, and 929 Mechanical-T fittings can best be expressed in terms of the pressure difference across the inlet and branch. The pressure difference can be obtained from the relationship below. C V and Kv Values Values for flow of water at +60 F/+16 C are shown in the table below. Formulas for C V / K v Values: 1 Exaggerated for clarity OUTLET SIZE Equivalent Length of Outlet Schedule 40 Carbon Steel Pipe (per UL 213, Sec. 16) (C = 120)ŧ FT C V /K V Values NOMINAL DIAMETER In/ ACTUAL O.D. In/ GROOVED THREADED GROOVED THREADED / / / / / / / / * / ŧ Hazen-Williams coefficient of friction is 120. * Pipe with a wall thickness of 0.165in./ VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED _6 REV_L

14 CARBON STEEL PIPE - HOLE CUT PRODUCTS Mechanical-T Bolted Branch Outlets STYLES AND FIRE PROTECTION APPROVALS AND PRESSURE RATINGS The information provided below is based on the latest listing and approval data at the time of publication. Listings/Approvals are subject to change and/or additions by the approvals agencies. Contact Victaulic for performance on other pipe and the latest listings and approvals. Run Outlet Pipe Approval Agency Rated Working Pressures psi/kpa Nominal Actual Outside Diameter Vds / / / Schedule UL ULC FM LPCB (Style ) (Style ) 21/ All 10, / All DF / All SF , ,4 30, /2 10, , ,4 30, NOTES: 10 refers to Listed/Approved Schedule 10 steel sprinkler pipe. 40 refers to Listed/Approved Schedule 40 steel sprinkler pipe. DF refers to Listed/Approved Dyna-Flow steel sprinkler pipe manufactured by American Tube Company. SF refers to Listed/Approved Super-Flo steel sprinkler pipe manufactured by Allied Tube and Conduit Corporation. Vic-Tap II Hole Cutting Tool for 4-8"/ carbon Steel Pipe The Vic-Tap II hole cutting tool is designed for use with the Style 931 Vic-Tap II Mechanical-T unit, which is a combination of the Style Mechanical-T and Series 726 Vic-Ball Valve. The Vic-Tap II is capable of tapping into carbon steel pipe systems under pressures up to 500 psi/3450 kpa. The Style 931 Vic-Tap II Mechanical-T unit is a full port ball valve which can be mounted on 4"/100, 5"/125, 6"/150 and 8"/200 diameter pipe. The Style 931 comes with a 2 ½"/65 grooved outlet. The drill motor is an electric motor with ground fault circuit interrupter (GFCI) in accordance with safety codes. For more information, refer to publication VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_L 11.02_7

15 CARBON STEEL PIPE - HOLE CUT PRODUCTS Mechanical-T Bolted Branch Outlets STYLES AND INSTALLATION Reference should always be made to the I-100 Victaulic Field Installation Handbook for the product you are installing. Handbooks are included with each shipment of Victaulic products for complete installation and assembly data, and are available in PDF format on our website at WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details. NOTE This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. For complete contact information, visit REV L UPDATED 05/2011 VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED _L

16 Schedule 10 and Schedule 40 FM Approved and UL Listed Sprinkler Pipe Bull Moose Tube Company is a recognized producer of quality pipe products. Our Schedule 10 and Schedule 40 are FM Approved and UL Listed (for U.S. and Canada), even though these products do not require separate approvals and listings. Bull Moose Tube made the decision to have them approved and listed for your peace of mind. Our Sch. 10 and Sch. 40 have been through the same rigorous testing as our other fine pipe products. Bull Moose Tube s Sch. 10 and Sch. 40 pipes are made to ASTM A135 and ASTM A795. These products are typically supplied with our protective coating but can be supplied without the coating so they can be hot-dip galvanized to meet FM requirements for use in dry systems in accordance with the zinc coating specifications of ASTM A795 or ASTM A53. All Schedule 10 and Schedule 40 pipe has a pressure rating of 300 PSI. Schedule 10 Pipe Nominal Pipe (in) Nominal O.D. (in) Nominal I.D. (in) Weight/Ft Bundle lbs/ft / lbs/ft / lbs/ft lbs/ft / lbs/ft lbs/ft lbs/ft 19 Schedule 40 Pipe Nominal Pipe (in) Nominal O.D. (in) Nominal I.D. (in) Weight/Ft Bundle lbs/ft / lbs/ft / lbs/ft lbs/ft / lbs/ft lbs/ft lbs/ft 19 PIPE PREPARATION For proper operation, all pipe surfaces should be cleaned prior to installation. In order to provide a leak-tight seat for the gasket, pipe surfaces should be free from indentations and projections from the end of the pipe to the groove. All loose paint, scale, dirt, chips, grease, and rust must be removed prior to installation. Failure to take these important steps may result in improper coupling assembly, causing leakage. Also, check the manufacturer s instructions for the specific fitting used. A company 1819 Clarkson Road Chesterfield, MO (800) FAX: (636) sales@bullmoosetube.com For additional information, contact your salesperson today at (800) or (636) in the USA, or from Canada call (800) All information contained herein is accurate as known at the time of publication. Bull Moose Tube reserves the right to change product specifications without notice and without incurring obligation. 12/09

17 IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS FireLock Fittings See Victaulic publication for details VNIIPO FireLock products comprise a unique system specifically designed for fire protection services. FireLock full-flow elbows and tees feature CAD-developed, hydrodynamic design, affording a shorter center-to-end dimension than standard fittings. A noticeable bulge allows the water to make a smoother turn to maintain similar flow characteristics as standard full flow fittings. FireLock fittings are designed for use exclusively with Victaulic IPS-sized couplings that have been Listed or Approved for Fire Protection Services. Use of other couplings or flange adapters may result in bolt pad interference. Victaulic FireLock fittings pressure ratings conform to the ratings of Victaulic FireLock Style 005 couplings. MATERIAL SPECIFICATIONS Fitting: Ductile iron conforming to ASTM A-536, grade Fitting Coating: Orange enamel. Red Enamel in EMEA-I. Optional: Hot dipped galvanized. JOB/OWNER CONTRACTOR ENGINEER System No. Submitted By Spec Sect Para Location Date Approved Date VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_I 10.03_1

18 IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS FireLock Fittings DIMENSIONS C to E C to E C to E C to E C to E T NO. 001 NO. 003 NO. 002 NO. 006 Nominal Actual Outside Diameter C to E No Elbow Approx. Weight Each kg C to E No Elbow Approx. Weight Each kg C to E No. 002 Straight Tee Approx. Weight Each kg Thickness T No. 006 Cap Approx. Weight Each kg 1 1/ / / VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED _2 REV_I

19 IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS FireLock Fittings FLOW DATA Nominal Actual Outside Diameter No Elbow Elbows Frictional Resistance Equivalent Feet/meters of Straight Pipe No. 002 Straight Tee No Elbow Branch Run 1 1/ / / The flow data listed is based upon the pressure drop of Schedule 40 pipe. VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_I 10.03_3

20 IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS FireLock Fittings GENERAL NOTES NOTE: When assembling FireLock EZ couplings onto end caps, take additional care to make certain the end cap is fully seated against the gasket end stop. For FireLock EZ Style 009/009V/009H couplings, use FireLock No. 006 end caps containing the EZ marking on the inside face or No. 60 end caps containing the QV EZ marking on the inside face. Non-Victaulic end cap products shall not be used with Style 009/009V/009H couplings. WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details. NOTE This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. For complete contact information, visit REV I UPDATED 2/2010 VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY VICTAULIC COMPANY. ALL RIGHTS RESERVED

21

22 Table of Contents Malleable Iron Small Mouth Top Beam Clamps Page 1 Malleable Iron Large Mouth Top Beam Clamps Page 1 Malleable Iron C Clamps Page 1 Page 29 in Ward PIPE FITTINGS Catalog Standard Cast Iron Pipe Fittings Class 125 Page 2 Page 30 in Ward PIPE FITTINGS Catalog Cast Iron Straight 90 Ells Page 3 Cast Iron Reducing 90 Ells Page 3 Page 31 in Ward PIPE FITTINGS Catalog Cast Iron 45 Ells Page 4 Cast Iron Straight Tees Page 4 Page 32 in Ward PIPE FITTINGS Catalog Cast Iron Reducing Tees Page 5 Page 33 in Ward PIPE FITTINGS Catalog Cast Iron Reducing Tees Page 6 Page 34 in Ward PIPE FITTINGS Catalog Cast Iron Reducing Tees Page 7 Page 35 in Ward PIPE FITTINGS Catalog Cast Iron Reducing Tees Page 8 Page 36 in Ward PIPE FITTINGS Catalog Cast Iron Reducing Tees Page 9 Cast Iron Reducing Couplings Page 9 Page 37 in Ward PIPE FITTINGS Catalog Cast Iron Pipe Caps Page 10 Cast Iron Cross Page 10 Page 38 in Ward PIPE FITTINGS Catalog Cast Iron Reducing Cross Page 11 Cast Iron Return Bend Class 125 Page 11 Page 39 in Ward PIPE FITTINGS Catalog Flanges Page 12 Page 40 in Ward PIPE FITTINGS Catalog

23

24

25

26

27

28

29

30

31

11.02 Mechanical-T Bolted Branch Outlets

11.02 Mechanical-T Bolted Branch Outlets STLES AND SEE ICTAULIC PUBLICATION 10.01 FOR DETAILS NIIPO ictaulic Mechanical-T Outlet provides a direct branch connection at any location a hole can be cut in pipe. The hole is cut oversize to receive

More information

Housing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)

Housing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.) SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The patented Style 107H rigid coupling joins 8"/50 200 standard roll grooved and cut grooved steel pipe.* The joint is assembled without disassembling the bolts,

More information

Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)

Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.) SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The Style 177 QuickVic flexible coupling is installation-ready, and joins 2-8"/50-200 standard roll grooved and cut grooved steel pipe. The coupling's unique

More information

QuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS

QuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS H ONL. SEE PAGE 4 FOR DETAILS. The patented Style 107 rigid coupling joins 12"/50 300 standard roll grooved and cut grooved steel pipe. The joint is assembled without disassembling the bolts, nuts, gasket

More information

FIRE PROTECTION EQUIPMENT 2017 DATA SHEETS BSP FIRE RESERVES THE RIGHT TO ALTER INFORMATION CONTAINED IN THIS CATALOGUE AT ANY TIME.

FIRE PROTECTION EQUIPMENT 2017 DATA SHEETS BSP FIRE RESERVES THE RIGHT TO ALTER INFORMATION CONTAINED IN THIS CATALOGUE AT ANY TIME. FIRE PROTECTION EQUIPMENT 2017 DATA SHEETS BSP FIRE RESERVES THE RIGHT TO ALTER INFORMATION CONTAINED IN THIS CATALOGUE AT ANY TIME. DATA SHEET INDEX 36m x 19mm FIRE HOSE REEL RISER INSTALLATION DETAIL

More information

Vic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730

Vic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730 Series 730 Vic-Strainer is lighter than flanged Y type strainers and provides straightthrough flow for lower pressure drop. It installs with two Victaulic couplings, and is rated up to 750 psi/5175 kpa

More information

08.08 Vic-Check Valves

08.08 Vic-Check Valves The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc

More information

SEE VICTAULIC PUBLICATION FOR DETAILS

SEE VICTAULIC PUBLICATION FOR DETAILS dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table

More information

Style 99 Roust-A-Bout Couplings

Style 99 Roust-A-Bout Couplings R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings

More information

EMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly

EMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly EMCO Corporation Waterworks is not responsible for any errors and discrepencies in the products depicted herein. Information is provided directly from our suppliers. aquamine pvc piping products Victaulic

More information

Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)

Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C) The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

Lenntech Tel Fax

Lenntech  Tel Fax SEE VICTAULIC PUBLICATIO.01 FOR DETAILS Style 99 Roust-A-Bout couplings are designed with heavy housings and grips to provide a strong component for joining plain and beveled end, including Schedule steel

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

REQUEST PUBLICATION 18.11

REQUEST PUBLICATION 18.11 * SEE VICTALIC PBLICATION 10.01 FOR DETAILS The Victaulic Pressfit 316 System for joining approved Type 316/316L stainless steel pipe provides a fast, easy, clean, reliable means for joining ½"/15, ¾"/

More information

Model 7706 Reducing Coupling. Deg. Axial Displacement

Model 7706 Reducing Coupling. Deg. Axial Displacement MODEL 7706 REDUCING COUPLING The Model 7706 Reducing allows direct reduction on a piping run and eliminates the need for a concentric reducer and couplings. The specially designed rubber gasket prevents

More information

Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications

Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from

More information

GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101

GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 Available Sizes 1" through 12" (25 through ) Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses

More information

Pressfit System for Carbon Steel Pipe

Pressfit System for Carbon Steel Pipe R PRESSFIT SYSTEM FOR ARBON STEEL PIPE Pressfit System for arbon Steel Pipe 12.02 VITALI IS AN ISO 9001 ERTIFIED OMPANY PRODT DESRIPTION L FM L See Victaulic publication 10.01 for details. The Pressfit

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

B U I L D I N G C O N N E C T I O N S T H AT L A S T

B U I L D I N G C O N N E C T I O N S T H AT L A S T B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior

More information

Fire Protection Price List. Piping. Systems. Solutions A FP.

Fire Protection Price List. Piping. Systems. Solutions A FP. Piping. Systems. Solutions. Fire Protection Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully

More information

Fire Protection Price List

Fire Protection Price List Piping. Systems. Solutions. Fire Protection Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully

More information

Series 751 FireLock European Alarm Check Valve Stations

Series 751 FireLock European Alarm Check Valve Stations R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series FireLock European Alarm Check Valve Stations Grooved X Grooved 0.0 VICTAULIC IS AN ISO 00 CERTIFIED COMPANY PRODUCT DESCRIPTION The Victaulic Series

More information

Victaulic Suction Vibration Isolation Pump Drop Series 337 Korea Only

Victaulic Suction Vibration Isolation Pump Drop Series 337 Korea Only Victaulic Suction Vibration Isolation Pump Drop Series 337 Korea Only 2.37 1.0 PRODUCT DESCRIPTION Available Sizes 3 12"/DN80 DN300 Maimum Working Pressure Rated to the working pressure of the PN/PN16

More information

Series W706 AGS Butterfly Valves (300 PSI/2065 kpa)

Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) 20.06 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W706 AGS (Advanced Groove System)

More information

FireLock NXT Deluge Valve. With Deluge Trim Grooved x Grooved. System No. Submitted By Spec Sect Para Location Date Approved Date

FireLock NXT Deluge Valve. With Deluge Trim Grooved x Grooved. System No. Submitted By Spec Sect Para Location Date Approved Date MEA: 248-98-E CSFM: 7770-0531-117 The patent-pending Victaulic Series 769 FireLock NXT controls the water supply entry into the deluge system piping and open sprinklers. The Series 769 is a low differential,

More information

Victaulic Discharge CBV Vibration Isolation Pump Drop Series 383/383G

Victaulic Discharge CBV Vibration Isolation Pump Drop Series 383/383G Victaulic Discharge CBV Vibration Isolation Pump Drop Series /G 2..0 PRODUCT DESCRIPTION Available Sizes 2"/ - 00 Offered in full or reduced port size (see Section.0 for details). Maimum Working Pressure

More information

Series W709 AGS Butterfly Valves (175 psi/1270 kpa)

Series W709 AGS Butterfly Valves (175 psi/1270 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series W709 AGS Butterfly Valves (175 psi/1270 kpa) 20.07 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W709 AGS (Advanced Groove System)

More information

Series 706 Butterfly Valves (300 PSI/2065 kpa)

Series 706 Butterfly Valves (300 PSI/2065 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series 706 Butterfly Valves (300 PSI/2065 kpa) 08.17 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 706 grooved end butterfly valve offers

More information

Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole

Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female

More information

Series 756 FireLock Dry System Check Valve

Series 756 FireLock Dry System Check Valve R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series FireLock Dry System Check Valve Grooved X Grooved and Flanged X Grooved 0.0 VICTAULIC IS AN ISO 900 CERTIFIED COMPANY PRODUCT DESCRIPTION The Victaulic

More information

Fire Protection Systems

Fire Protection Systems VICTAULIC FIRE PROTECTION SYSTEMS G-105 UPDATED 03/2011 Fire Protection Systems G-105 UPDATED 03/2011 Innovation More than 85 years of piping systems solutions Built into every FireLock system are innovative

More information

Advantages of Grooved Fittings

Advantages of Grooved Fittings Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows

More information

30.85 FireLock NXT Actuated Valve with LPCB Approved Preaction Trim

30.85 FireLock NXT Actuated Valve with LPCB Approved Preaction Trim Actuated Valve with LPCB Approved Preaction Trim 104g/01 with: - Electric Activation with Redundant Solenoid Valve - Electric Activation with Redundant Solenoid Valve and AutoConvert Dry Trim - Double

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile

More information

Series 758 FireLock Actuated System Valve

Series 758 FireLock Actuated System Valve R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series 58 FireLock Actuated System Valve With Deluge Trim Grooved X Grooved and Flanged X Grooved 30.04 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT

More information

Series 709 Butterfly Valves (175 psi/1270 kpa)

Series 709 Butterfly Valves (175 psi/1270 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series 709 Butterfly Valves (175 psi/1270 kpa) 08.03 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 709 grooved end butterfly valve offers

More information

STAINLESS STEEL SYSTEMS

STAINLESS STEEL SYSTEMS STAINLESS STEEL SYSTEMS 139 Systems Table of Contents Figure 472 Rigid Couplings Page 142 Figure 401 45 Elbows Page 149 Figure SS-7X Rigid Couplings (Large Diameter) Page 143 Figure 405 Flexible Couplings

More information

Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date

Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications

More information

Grinnell Grooved Fire Protection Products Grooved Fittings

Grinnell Grooved Fire Protection Products Grooved Fittings Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical

More information

*Applies to 6 x 4" No. 650 Reducer only. C to E. No No º Elbow Approx. Wgt. Each Lbs. kg. C to E Inches mm JOB/OWNER CONTRACTOR ENGINEER

*Applies to 6 x 4 No. 650 Reducer only. C to E. No No º Elbow Approx. Wgt. Each Lbs. kg. C to E Inches mm JOB/OWNER CONTRACTOR ENGINEER SEE VITAULI PULIATION 0.0 FOR DETAILS TS fittings for use with Style 606 copper connection couplings or Style 64 Vic-Flange Adapters. Fittings are full flow, standard radius wrought copper supplied roll

More information

FIG Gruvlok Flange Adapter

FIG Gruvlok Flange Adapter FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method

More information

Style Flange Adapter

Style Flange Adapter Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved

More information

FIRE SPRINKLER EQUIPMENT SUBMITTAL

FIRE SPRINKLER EQUIPMENT SUBMITTAL Fire Systems West, Inc. 206 FRONTAGE ROAD NORTH, SUITE C PACIFIC, WA 98047 (253) 833-1248 FIRE SPRINKLER EQUIPMENT SUBMITTAL FOR Being 4-20-21 VPAL MAINTENANCE SHED AND SUBSTATION FSW JOB NO. 02-11-11013

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS ARBON STL PIP - GROOVD FITTINGS Grooved nd Fittings S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles.

More information

Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler Market Keeping the art of distribution simple

Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler Market Keeping the art of distribution simple Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler Market Keeping the art of distribution simple Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler

More information

Product Submittals for Project

Product Submittals for Project Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building

More information

I-VICFLEX.AB11. Victaulic VicFlex Style AB11 Low-Profile Sprinkler Fitting for Suspended Ceiling Systems WARNING INSTALLATION INSTRUCTIONS

I-VICFLEX.AB11. Victaulic VicFlex Style AB11 Low-Profile Sprinkler Fitting for Suspended Ceiling Systems WARNING INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS I-VICFLEX.AB11 Victaulic VicFlex Style AB11 Low-Profile Sprinkler Fitting for Suspended Ceiling Systems Read and understand all instructions before attempting to install any Victaulic

More information

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications 82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal

More information

B NPT. Dimensions Inches/millimeters

B NPT. Dimensions Inches/millimeters R IPS CARON ST PIP GROOVD ACCSSORIS Series 731-G Suction Diffuser 09.14 VICTAUIC IS AN ISO 9001 CRTIFID COMPANY PRODUCT DSCRIPTION Victaulic Series 731-G Suction Diffuser provides optimum flow conditions

More information

Series 769 FireLock NXT Deluge Valve

Series 769 FireLock NXT Deluge Valve IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series 79 FireLock NXT Deluge Valve With Deluge Trim Grooved X Grooved 30.81 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The patent-pending

More information

08.12 Vic-Plug Balancing Valve

08.12 Vic-Plug Balancing Valve Series 377 Vic-Plug balancing valve is the only eccentric grooved end plug valve made specifically for throttling services. For 3 12"/80 300 systems, Victaulic Style 307 transition couplings are available

More information

Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)

Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings

More information

FIG Gruvlok Flanges

FIG Gruvlok Flanges Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the

More information

Easy Riser swing check valve Models E-1 & F-1

Easy Riser swing check valve Models E-1 & F-1 Page 1 of 7 1. DESCRIPTION The Viking Easy Riser Swing Check Valve is a general purpose rubber-faced approved for use in fire service systems. The valve is for use in wet system risers, preaction system

More information

Grooved Fire Protection. Installation Handbook

Grooved Fire Protection. Installation Handbook Grooved Fire Protection Installation Handbook October 2016 Grooved Fire Protection Installation Handbook OCTOBER 2016 IH-1000FP Worldwide Contacts www.tyco-fire.com GLOBAL HEADQUARTERS 1400 Pennbrook

More information

Grooved Piping System for Fire Protection Services

Grooved Piping System for Fire Protection Services Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic

More information

Model C10 / C11 / C20 / C60 Grooved Fitting For Copper Tubing Nominal Pipe Pipe C10 90 o Elbow C11 45 o Elbow C20 Tee C60 Cap

Model C10 / C11 / C20 / C60 Grooved Fitting For Copper Tubing Nominal Pipe Pipe C10 90 o Elbow C11 45 o Elbow C20 Tee C60 Cap GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloy C89836* Bismuth copper alloy per ASTM B584. Materials

More information

Victaulic Specification Power Industry

Victaulic Specification Power Industry Victaulic Specification Power Industry 1.01 General: A. Section Includes: B. Submittals: C. References: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Victaulic Valves

More information

08.20 VIC -300 MasterSeal Butterfly Valves

08.20 VIC -300 MasterSeal Butterfly Valves CRBON STEEL PIPE - GROOVED VLVES Vic -300 MasterSeal butterfly valves are designed for pressures ranging from full vacuum to 300 psi/2065 kpa and for bi-directional, dead end services to full working pressure.

More information

Grooved Piping Products

Grooved Piping Products 2 Grooved Piping Products Tyco Fire Products is ISO 9001 Certified with products manufactured in our newly constructed state of the art domestic ductile iron foundry and manufacturing facilities. We are

More information

I-VICFLEX.AB5. Victaulic VicFlex Style AB5 Sprinkler Fitting for Wood or Metal Joists/Studs and CD Profile (60 mm) Channel Ceiling Systems WARNING

I-VICFLEX.AB5. Victaulic VicFlex Style AB5 Sprinkler Fitting for Wood or Metal Joists/Studs and CD Profile (60 mm) Channel Ceiling Systems WARNING INSTALLATION INSTRUCTIONS I-VICFLEX.AB5 Victaulic VicFlex Style AB5 Sprinkler Fitting for Wood or Metal Joists/Studs and CD Profile ( mm) Channel Ceiling Systems WARNING Read and understand all instructions

More information

Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings

Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130

More information

General Price List Main effective MAY 13, General Price List. Main

General Price List Main effective MAY 13, General Price List.   Main General Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully searchable product and project databases

More information

Project: Customer: Engineer: Pump Manufacturer: Drawing Submittal Package Model GPL Limited Service Full Voltage Across the Line Start Electric Pump Controller Contents: Submittal Data Sheets Dimensional

More information

030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50

030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 Pipe Fitter Handbook Another Anvil Advantage Mini-catalog Installation Procedures Technical Data Copyright 2001 by Anvil International, Inc.

More information

Grooved Piping System for Fire Protection Services

Grooved Piping System for Fire Protection Services Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic

More information

GROOVED FITTINGS FOR COPPER TUBING

GROOVED FITTINGS FOR COPPER TUBING GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloys C90500 and or C89836* Bismuth copper alloy per ASTM

More information

GRINNELL Model B303 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

GRINNELL Model B303 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description Worldwide Contacts www.grinnell.com GRINNELL Model B Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B Butterfly Valves provide for efficient

More information

I-731-D/W731-D. Suction Diffuser. Important Installation Information. series 731-D and W731-D

I-731-D/W731-D. Suction Diffuser. Important Installation Information. series 731-D and W731-D Important Installation Information WARNING Read and understand all instructions before attempting to install, remove, adjust, or maintain any Victaulic piping products. Depressurize and drain the piping

More information

GRUVLOK FITTINGS FOR GROOVED-END PIPE

GRUVLOK FITTINGS FOR GROOVED-END PIPE GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These

More information

Operators: Lever Handle: 1 1/2 3"/40 80 mm Carbon steel, zinc plated, plastic grip. 4 & 6"/100 & 150 mm Carbon steel, enamel paint

Operators: Lever Handle: 1 1/2 3/40 80 mm Carbon steel, zinc plated, plastic grip. 4 & 6/100 & 150 mm Carbon steel, enamel paint The Series 726 is a high-pressure standard port ball valve with grooved ends. This twopiece, end-entry valve features a floating ball for lower torque requirements. Series 726 valves are NACE compliant

More information

Mechanical Piping Products

Mechanical Piping Products October 202 For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com. Mechanical Piping Products b u i l d i n g c o n n e c t i o n s t h a t l

More information

TECHNICAL DATA OBSOLETE

TECHNICAL DATA OBSOLETE August 31, 2006 Check Valve 815a 1. PRODUCT NAME Viking Easy Riser Swing Check Valve Model E-1: Available since 1992 Model F-1: Available since 1994 2. MANUFACTURER The Viking Corporation 210 N. Industrial

More information

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description Worldwide Contacts www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B0 and Model BN0 Butterfly

More information

Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.

Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings. Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...

More information

Instructions for Installation, Operation, Care and Maintenance

Instructions for Installation, Operation, Care and Maintenance Bulletin 59 Model DDX Deluge Valve (50 mm), ½ (65 mm), (80 mm), 76 mm, 4 (00 mm), 6 (50 mm), 65 mm & 8 (00 mm) Bulletin 59 Instructions for Installation, Operation, Care and Maintenance Wet Pilot Line,

More information

FireLock NXT Actuated Valve with Preaction Trim. System No. Submitted By Spec Sect Para Location Date Approved Date

FireLock NXT Actuated Valve with Preaction Trim. System No. Submitted By Spec Sect Para Location Date Approved Date VNIIPO ME: 248-98-E CSFM: 7770-0531-117 The patent-pending Victaulic Series 769 FireLock NXT Preaction Valve controls the water supply entry into the Preaction system piping and sprinklers. The Preaction

More information

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development.

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development. Pipes & Fittings SHIELD Introduction SHIELD is a company created to cater to the infrastructure, fire protection and building services industries with a comprehensive range of products designed to be competitive

More information

Flexible Sprinkler Connections

Flexible Sprinkler Connections SuperFlex is the ultimate solution in flexible fire sprinkler drops. No need to measure or count the number of bends, no leaks, no worries! SuperFlex provides all the flexibility needed for an error free

More information

Instructions for Installation, Operation, Care and Maintenance

Instructions for Installation, Operation, Care and Maintenance Model D Dry Pipe Valve Bulletin 350 Rev. S Bulletin 350 Rev. S Instructions for Installation, Operation, Care and Maintenance 4 (100mm) 6 (150mm) Valve With Model D Trimmings Listed by Underwriters Laboratories,

More information

Typical Specifications Grooved Piping Method

Typical Specifications Grooved Piping Method R TYPICAL SPECIFICATIONS GROOVED PIPING METHOD Typical Specifications Grooved Piping Method 28.01 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY To download the electronic version of Vic-Guide Spec, please

More information

Valves & Flow Control Components Valves & Flow Control Components

Valves & Flow Control Components Valves & Flow Control Components Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110

More information

Model CV-1FR Grooved-End Riser Check Valves 2 Inch to 12 Inch (DN50 to DN300) General Description. Installation. Technical Data

Model CV-1FR Grooved-End Riser Check Valves 2 Inch to 12 Inch (DN50 to DN300) General Description. Installation. Technical Data Worldwide Contacts www.tyco-fire.com Model CV-FR Grooved-End Riser Check Valves Inch to Inch (DN0 to DN00) General Description The TYCO Model CV-FR Grooved- End Riser Check Valve is a compact and rugged

More information

Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees

Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees Section 1 Grooved Mechanical ouplings, Flange dapters & Mechanical Tees Grooved Mechanical ouplings... 1 Rigid & Flexible ouplings... 13 M-7 Installation-Ready Rigid oupling... 14 K-9 & Z05 Rigid oupling...

More information

I-VICFLEX.AB7 VicFlex Sprinkler Fittings for Ceiling Suspension Systems STYLE AB7

I-VICFLEX.AB7 VicFlex Sprinkler Fittings for Ceiling Suspension Systems STYLE AB7 INTRODUCTION WARNING Read and understand all instructions before attempting to install any Victaulic VicFlex products. Wear safety glasses, hardhat, and foot protection. These installation instructions

More information

The applicable material specifications for ductile iron and rubber gaskets apply:

The applicable material specifications for ductile iron and rubber gaskets apply: 72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures

More information

I-VICFLEX.AB1/AB2/AB10

I-VICFLEX.AB1/AB2/AB10 INSTALLATION INSTRUCTIONS I-VICFLEX.AB1/AB/AB10 Victaulic VicFlex Flexible Hose with Fittings for Fire Protection Service Styles AB1, AB, and AB10 Brackets Flexible Hose Listing and Approval Information

More information

COOPLOK Grooved Submittal. Material Specifications

COOPLOK Grooved Submittal. Material Specifications SmithCooper International (SCI) COOPLOK Submittal Directions: Enter in the project information below; then print. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:

More information

SJ-300N J-04. Model SJ-300N-L Butterfly Valve with Lever Handle

SJ-300N J-04. Model SJ-300N-L Butterfly Valve with Lever Handle SJ-300N J-04 MODEL SJ-300N BUTTERFLY VALVE The Model SJ-300N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a

More information

SJ-300N. Model SJ-300N-L Butterfly Valve with Lever Handle Max. Working Pressure (CWP)* PSI Bar Dimensions A B C D E in.

SJ-300N. Model SJ-300N-L Butterfly Valve with Lever Handle Max. Working Pressure (CWP)* PSI Bar Dimensions A B C D E in. SJ-N MODEL SJ-N BUTTERFLY VALVE The Model SJ-N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a -position lever

More information

+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.

+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics. Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3

More information

TECHNICAL DATA CONCENTRATE CONTROL VALVE APPLICATIONS, PRIMING CONNECTIONS, AND TRIMS 1. GENERAL DESCRIPTION 2. LISTINGS AND APPROVALS.

TECHNICAL DATA CONCENTRATE CONTROL VALVE APPLICATIONS, PRIMING CONNECTIONS, AND TRIMS 1. GENERAL DESCRIPTION 2. LISTINGS AND APPROVALS. Page 1 of Telephone: 29-95-9501 Technical Services: 877-38-5 Fax: 29-818-180 Email: techsvcs@vikingcorp.com 1. GENERAL DESCRIPTION The Halar Coated Concentrate Control (CCV) is utilized in Viking foam

More information

FIRE PROTECTION PRODUCTS

FIRE PROTECTION PRODUCTS FIRE PROTECTION PRODUCTS Rev.0119 6 info@ayvaz.com www.ayvaz.com 1 FIRE PROTECTION PRODUCTS ANGULAR EXPANSION JOINTS GIMBAL TYPE SEISMIC EXPANSION JOINTS Bellow Material Stainless Steel AISI 321 (Opt.

More information

70.03 Victaulic Vortex TM

70.03 Victaulic Vortex TM Series 951 Combination Box with Ball Valve Series 951 Combination Box with Solenoid Patent 7,686,093 - Dual Extinguishment fire suppression system using high velocity low pressure emitters. oreign patents

More information

Ductile Iron Pipe Fittings

Ductile Iron Pipe Fittings 0 JTPR R FM UR ISTED 02 JTPR R FM UR ISTED Qualifications 0 JTPR R FM U R ISTED 0 JTPR R FM UR ISTED Products show Rigid Coupling Flexible Coupling Mechanical Tee Grooved outlet Mechanical Tee Threaded

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast

More information

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems. SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000

More information