BUTTERFLY VALVE CATALOGUE //

Transcription

1 BUTTERFLY VALVE CATALOGUE // 11 The Fort Vale of s 1 CATALOGUE REVISION_ Fort Vale Engineering Ltd. 20

2 BUTTERFLY CATALOGUE // CONTENTS // 2 BUTTERFLY VALVES //» 2 CLAMPED WIDDOP BUTTERFLY VALVE 3 BUTTERFLY VALVES //» 3 HYGIENIC BUTTERFLY VALVE» 3 CLAMPED WIDDOP BUTTERFLY VALVE» 3 CLAMPED PNEUMATIC WIDDOP BUTTERFLY VALVE» 3 FLANGED WIDDOP BUTTERFLY VALVE» 3 TANK-PRO ROAD TANKER BUTTERFLY VALVE» 3 UNIFLY ROAD TANKER BUTTERFLY VALVE» TW0 CLAMPED BUTTERFLY VALVE» TW0 CLAMPED BUTTERFLY VALVE BUTTERFLY VALVES //» CLAMPED WIDDOP BUTTERFLY VALVE Fort Vale Engineering Ltd. 200 BUTT_CONTENTS REV

3 2 Clamped Widdop 2 Clamped - left hand operated with TIR to handle and padlock facility. Contact parts manufactured in 31 stainless steel with PTFE main seal. Options - of 3 and clamped valves. Alternative seal materials; Alloy C2 version; 0L version; available with pneumatic actuation. Fitting Details Part Number : 355/ Specification Weight 2.31 Kgs Design Pressure (MAWP) Bar ( PSI) Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) Approved to BS EN INLET Ø. Ø 5.2 CNAF/PTFE inlet gasket *Note CNAF/PTFE outlet gasket *Note Note: Gasket drilling x 1mm holes on a 5mm PCD. Parts drawing Item Description 1 Split ring 3/ M countersunk bolt Washer 2030 Operating lever 3/3 5 Handle 3/0050 Handle location spring 3/00 Handle location pin 3/00 Sockethead capscrew (2) Plain washer (2) Stuffing clamp 3/ PTFE stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring Spindle 355/ PTFE spindle seat 355/500 1 Spring washer (2) Full nut (2) Body 355/0 1 PTFE O ring PTFE O ring Bottom spindle 355/ PTFE lower bush 355/ Closure plate 355/ PTFE main seal 355/ Seal clamp plate 355/ EPDM O ring SEAL KIT Part number 355/0SK contains all parts marked Page 1 Fort Vale Engineering Ltd. 201 BUTT01 REV

4 3 Hygienic 3 Concentric Disc - Suitable for hygienic applications. Inlet/outlet connections available include 3 BSP, 3 RJT, 3 Camlock, flanged and weld prepared. Single hand operation with TIR facility. Contact parts manufactured in 31 stainless steel fitted with Silicone seal as standard. Options - Other seal materials available on request. Other connections available on request. Fitting Details Specification Example shown : 35/X 1. Weight Design Pressure (MAWP) Test Pressure Silicone Seal Design Temperature Kg (See Note) Bar (5PSI) Bar ( PSI) 200 C (32 F).1 Note : Weight and seal design temperature varies according to valve specification. Ø3.0 Description FORT VALE 31 ST ST Ø BSP blank cap seal separate 303SS 3 RJT blank cap seal separate 35/RJT3 3 Camlock cap seal separate 0/DC300 Inlet Outlet 3 RJT 3 RJT 35/X 3 RJT 3 BSP 35/0 3 BSTD 3 RJT 35/10 3 BSTD 3 BSP 35/0000 TW 0 3 BSP 35/0S DIN 0 3 Camlock 35/350X X in part number indicates variable seal options. Parts drawing Item Description 1 M lock nut Handle assembly 35/20 3 Top flange 35/5 Spring washer () M nut () Body half See Note 35/XXXX Main seal X Lower bearing support 35/302 M hex screw () Vane 35/ Guide bush 35/3023 X indicates that the part number varies according to the valve specification. Fort Vale Engineering Ltd Page 2 BUTT002 REV

5 3/000B SERIAL No. 35 MATERIAL VARIOUS M.A.W.P..0BAR DESIGN TEMP 200 C YEAR OF MANUFACTURE: **** Data 3 Clamped Widdop 3 Clamped - left hand operated with TIR to handle and padlock facility. Contact parts manufactured in 31 stainless steel with PTFE main seal. Options - lockable handle. Congealing cargo version with semi-spherical closure plate. Right hand operated version. of 2 and clamped valves. TW style body available. Specification Weight 3.5 Kg Design Pressure (MAWP) Bar ( PSI) Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) Design approvals by Lloyds Register of Shipping, Rijksdienst, SNCF, RMRS. Approved to BS EN2 Fitting Details Description 3/000B Left hand standard butterfly valve 3/1B Left hand with semi-spherical closure plate 3/000A Right hand standard butterfly valve Part No : 3/000B 1. INLET Ø.2 Ø. Ø.1 SERRATIONS OUTLET CNAF/PTFE inlet gasket CNAF/PTFE outlet gasket Bolting kit 3/10 3 BSP outlet flange 3/0 3 BSP blank cap with PTFE washer 303PS 3 Camlock outlet flange 3/05 3 Camlock blank cap 0/DC300 3 NPT outlet flange 3/0 3 NPT blank cap with PTFE washer 25/3250 Ø Ø1.0.5 Assembly Details Example Discharge Assembly IMPORTANT NOTE BUTTERFLY VALVE MUST BE ASSEMBLED TO THE FOOTVALVE/TANK OUTLET PIPEWORK WHILST IN THE CLOSED POSITION. M1 BOLTS TORQUE SETTING : 0 NM (0 LBF FT) Fort Vale Engineering Ltd /0 303PS 3/10 Page 3 BUTT0 REV

6 3 Clamped Widdop Parts drawing Item Description 1 Sockethead setscrew Washer Split ring 3/0011 Operating lever 3/3 5 Handle 3/0050 Handle location spring 3/00 Handle location pin 3/00 Sockethead capscrew (2) Plain washer (2) Stuffing clamp 3/ PTFE stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring Spindle 3/ Split bearing 252/051 1 PTFE spindle seat 3/000 1 Spring washer (2) Full nut (2) Body 3/ Bottom spindle 3/ PTFE bottom bush 3/ Closure plate 3/ PTFE main seal 3/ Seal clamp plate 3/ Nitrile O ring SEAL KIT Part number 3/00SK contains all parts marked REPAIR KIT Part number 3/00RKA contains all parts marked SELF ADHESIVE DECAL - PART NO. 3/0300 Text in English, German and French A detailed step-by-step repair manual is now available for our range of discharge butterfly valves. Please contact our Sales team for further information. Fort Vale Engineering Ltd. 20 Page BUTT0 REV

7 3 Clamped Pneumatic Widdop 3 Clamped with Spring Return Pneumatic Actuator - valve connection to actuator to ISO 5211 / DIN 333 standards. Counter-clockwise opening. Contact parts manufactured in 31 stainless steel with PTFE seal. Options - a full range of manually operated valves are available. Specification Weight Design Pressure (MAWP) Test Pressure Fitting Details 1 Kg Bar ( PSI) Bar (15 PSI) Valve Design Temperature -0 C to C (-0 F to 3 F) Actuator Design Temperature -20 C to 0 C (- F to 1 F) M1 clamping bolts torque setting 0 NM (0 LBF FT) Operating Pressure Requirements Start to open 3.1 Bar (5 PSI) Fully open 3. Bar (55 PSI) Butterfly valve approved to BS EN2. Part Number : 3/000BPN 3.0 Description 3/000B Standard manually operated butterfly valve 3/000BPN Butterfly valve with pneumatic actuator CNAF/PTFE inlet gasket CNAF/PTFE outlet gasket 3/10 Bolting kit 3/0 3 BSP outlet flange 303PS 3 BSP blank cap with PTFE washer 3/05 3 Camlock outlet flange 0/DC300 3 Camlock blank cap 3/0 3 NPT outlet flange 25/ NPT blank cap with PTFE washer Ø.1 Ø. Ø115.1 SERRATIONS Fort Vale Engineering Ltd. 20 Page 5 BUTT02 REV

8 3 Clamped Pneumatic Widdop Parts drawing Item Description 1 Spring return actuator Drive adaptor assembly 3/22 3 Bridge assembly 3/220 M flat section spring washer () M x 20mm hex head bolt () Stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring 2031 Spindle 3/0200 Split bearing 252/ PTFE spindle seat 3/000 Closure plate 3/000 Main seal 3/ Nitrile O ring Seal clamp plate 3/005 1 Bottom bush 3/ Bottom spindle 3/003 1 Body 3/ M full nut (2) M plain washer (2) M x 25mm socket capscrew (2) SEAL KIT Part number 3/00SK contains all parts marked Fort Vale Engineering Ltd. 20 Page BUTT02 REV

9 TM 25. (1.00 ) Data 3 Flanged Widdop 3 Flanged - inlet flange drilled x 1mm holes spaced as shown below on a 1mm PCD; outlet flange with slots 1mm equi-spaced on a 1mm PCD. Left hand operated with TIR and padlock facility to handle. Contact parts manufactured in 31 stainless steel with PTFE seals. Options - alternative inlet flange drilling. Congealing cargo version with semi-spherical closure plate. Steam heated option. Fitting Details Specification Part Number : 3/3A M BOLTS TORQUE SETTING : 50 NM (3 LBF FT) 202. Weight Kgs Design Pressure (MAWP). Bar (0 PSI) Test Pressure.35 Bar (150 PSI) Design Temperature -55 C to 200 C (- to 32 F) SLOTS 1.0 EQUI-SPACED ON A 1.1 MINOR PCD. (OUTLET FLANGE) 3.3 FORT VALE 0mm FLANGED DISCHARGE VALVE 3/3A SEALS: PTFE MAWP:. barg 0.1 psig SERIAL NUMBER: REF TEMP RANGE: -55ºC TO 200º BS EN 2:200 YEAR OF MANUFACTURE: 20XX BODY MATERIAL: 1.0 DN REF INLET Ø.1 HOLES Ø1.0 SPACED AS SHOWN ON A 1.3 PCD. (INLET FLANGE) Ø. Design approvals by Lloyds Register of Shipping, Rijksdienst, SNCF, RMRS. Approved to BS EN2 Description 3/3A hole inlet standard valve 3/3A DIN0 inlet flange for timing positions 3/300A Inlet flange with steam heating provision 3/A Std. valve with semi-spherical closure plate Ø203.2 Ø.5 STD SERRATIONS Ø. STD SERRATIONS Ø CNAF/PTFE inlet gasket Solid PTFE outlet gasket Dished blind flange 3/0022CM Bolting kit 311/3500 Pivot pin 3/50 Assembly Details Example Top Discharge Assembly Blind flange 3/0022CM Gasket Butterfly valve 3/3A Pivot pin 3/50 Bolting kit 311/3500 Stud kit 3/00 Gasket Syphon tube 3/0 Gasket Tank pad 3/ (.5 ) Fort Vale Engineering Ltd. 20 Page Ø. (3.50 ) Ø200.0 (. ) BUTT01 REV

10 3 Flanged Widdop Parts drawing Item Description 1 Countersunk setscrew Washer Split ring 3/0011 Operating lever 3/3 5 Handle 3/0050 Handle location spring 3/00 Handle location pin 3/00 Sockethead capscrew (2) Plain washer (2) Stuffing clamp 3/ Full nut (2) PTFE stuffing clamp bush 3/0301 PTFE O ring (2) Viton O ring Spindle 3/ Split bearing 252/051 1 PTFE spindle seat 3/000 1 Body 3/11 1 Bottom spindle 3/ PTFE bottom bush 3/ Closure plate 3/ PTFE main seal 3/ Nitrile O ring Seal clamp plate 3/1 SEAL KIT Part number 3/00SK contains all parts marked REPAIR KIT Part number 3/31RKA contains all parts marked SELF ADHESIVE DECAL - PART NO. 3/0300 Text in English, German and French A detailed step-by-step repair manual is available for our range of discharge butterfly valves. Please contact our Sales team for further information. Fort Vale Engineering Ltd. 20 Page BUTT015 REV

11 3 Tank-Pro Road Tanker 3 NB Tank-Pro - weld-prepared inlet and 3 BSP threaded outlet. Lockable handle with T.I.R. as standard. Contact parts manufactured in 31 stainless steel with PTFE main seal. Options - body may be supplied with or without 3/ BSP venting port. Outlet may be supplied 3 BSP standard or extended, 3 NPT or weld-prepared. Congealing cargo closure plate may be incorporated. Features Designed specifically to meet the needs of the road tanker industry and especially suited to chemical applications. Supplied as a complete unit requiring no extra parts to assemble the valve to the tank. The valve concept eliminates the need for the valve to be centralized when fitting to the tank, thus avoiding potential valve damage and/or leakage. Optional 3/ BSP port integral to the valve body allows for a purge or sampling facility. Clean valve internal lines reduces the risk of contamination between successive cargoes. Eccentric outlet facilitates full self-draining. Simple maintenance procedure with all internal mechanism and seals common to the standard Fort Vale 3 butterfly valve, thus reducing the required stock of spare parts. Lockable handle with TIR facility as standard to meet ADR requirements. A removable square drive key is included with each valve. Specification Weight.0 Kgs Design Pressure Bar ( PSI) Body Hydraulic Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) Lloyds Register of Shipping Design Appraisal document number DCF3/1. Approved to BS EN2. Rijksdienst voor het Wegverkeer Approval number VLG S-301. Body Outlet 3/00SXBA Non-vented 3 BSP standard 3/00SVBA Vented 3/ BSP 3 BSP standard 3/00SXEA Non-vented 3 BSP extended 3/00SVEA Vented 3/ BSP 3 BSP extended 3 BSP blank cap with PTFE seal 303PS Conversion mounting kit 3/01KIT Fitting Details Example shown : 3 Tank-Pro - part number 3/00SXBA INLET ADAPTOR HOLES Ø1.0 EQUI-SPACED AS SHOWN ON A 0.0 PCD Ø..2 Ø.5 3"BSP THREAD OUTLET ADAPTOR HOLES Ø11.5 EQUI-SPACED AS SHOWN ON A 11.2 PCD Fort Vale Engineering Ltd. 20 Page BUTT00 REV

12 3 Tank-Pro Road Tanker Parts drawing Item Description 1 M socket head set screw Washer Handle assembly 3/005 Electrical continuity spring 3/001 5 M socket head cap screw (2) M plain washer (2) Stuffing plate 3/001 Stuffing clamp bush 3/0301 PTFE O Ring 2033 Viton O ring Spindle 3/0200 Split bearing *See Note A 252/051 Perfluoroelastomer O Ring PTFE spindle seat 3/ M full nut () M spring washer () M hex head set screw () Item Description 1 Inlet adaptor *See Note B 3/ 1 CNAF/PTFE inlet gasket Nitrile O ring Seal clamp 3/1 22 PTFE main seal 3/ Closure plate 3/ / Taper plug *See Note B 5-0XX 25 Bottom spindle 3/003 2 Bottom spindle bush 3/ M socket head cap screw () M spring washer () BSP outlet *See Note B 3/30 30 PTFE outlet seal Body (non-vented) *See Note B 3/20A 32 M full nut (2) M spring washer (2) Key 3/25 Note A : Split bearing, part no. 252/051 is used in valves manufactured since November Please order 252/051 in addition to 3/00SK if it is required as a spare part. Fort Vale Engineering Ltd. 20 Note B : Part number varies according to specification SEAL KIT part number 3/SK contains all parts marked Page BUTT00 REV

13 3 Unifly Road Tanker 3 Unifly Road Tanker - weld-prepared inlet and 3 BSP threaded outlet. Contact parts manufactured in 31 stainless steel with PTFE main seal. Options - body may be supplied with or without 3/ BSP venting port. Inlet adaptor available straight, angled or with 5mm I/D. Specification Body Inlet Adaptor 3/2500AVA Vented 3/ BSP Angled 3/2500ANA Non-vented Angled 3/2500SVA Vented 3/ BSP Straight 3/2500SNA Non-vented Straight 3/2500BVA Vented 3/ BSP 5mm I/D 3/2500BNA Non-vented 5mm I/D 3/2500NVA Vented 3/ BSP No inlet adaptor Weight 5. Kgs Design Pressure (MAWP) Bar ( PSI) Service Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C -0 F to 32 F Approved to BS EN2. 3/2500NNA Non-vented No inlet adaptor Part Number 303PS Description 3 BSP blank cap with PTFE seal Fitting Details Part Number : 3/2500XXA Ø. Ø..2 Ø5.5 3"BSP INLET ADAPTOR X Ø1.0 HOLES EQUI-SPACED ON A 0.0 PCD. Fort Vale Engineering Ltd FULL THREAD Page 11 BUTT030 REV

14 Parts drawing 3 Unifly Road Tanker Item Description 1 Split ring 3/ Handle lever 3/3 3 Countersunk bolt Retaining washer Butterfly handle 3/0050 Handle spring 3/00 Electrical continuity spring 3/001 M cap screw (2) M plain washer (2) Stuffing clamp 3/ M full nut (2) M spring washer (2) Stuffing clamp bush 3/ Spindle 3/ Viton O ring PTFE spindle seat 3/000 SEAL KIT Part number 3/25SK contains all parts marked Fort Vale Engineering Ltd. 201 Item Description 1 Butterfly valve body with vent 3/2520 Butterfly valve body without vent 3/25 1 3/ BSP taper plug *See note M full nut () M spring washer () Bottom bush 3/ Bottom spindle 3/ M hex bolt () Inlet flange **See note 3/XX 25 CNAF/PTFE gasket (sold separate) Nitrile O ring Seal clamp 3/1 2 PTFE main seal 3/ Closure plate 3/ PTFE O ring Handle location pin 3/00 *Note Item 1 is required only on the vented assembly. **Note Item 2 part no. varies according to specification. Page BUTT031 REV

15 TW0 Clamped 0mm Clamped - drilled TW 0. Designed to clamp between two TW0 flanges with the bolts passing through the valve body holes. Left hand operated lockable handle with T.I.R. Contact parts manufactured in 31 stainless steel with PTFE seal. Options - TW0 style body. Fitting Details Specification Example shown : 3/5500B Weight 5. Kg Design Pressure (MAWP) Bar ( PSI) Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) Design approval by AIB Vincotte. Approved to BS EN2 HOLES Ø.0 EQUI-SPACED ON A 0.0 PCD (TW0) Parts Drawing 15.3 Ø.5 OVER SERRATIONS Ø.2.2 Ø. Ø11. OVER SERRATIONS Ø152. Description 3/5500B TW0 clamped butterfly valve /5500B TW0 clamped butterfly valve PTFE/CNAF TW0 envelope gasket 5/001 TW0 mating flange 3/55 3 BSP eccentric TW0 outlet flange Item Description 1 M socket capscrew (2) M plain washer (2) M countersunk setscrew Barrel lock handle 3/005 5 Stuffing clamp 3/001 Stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring 2031 Butterfly valve spindle 3/0200 Split bearing 252/ PTFE spindle seat 3/000 Body 3/55 Closure plate 3/000 1 Main seal 3/ Nitrile O ring Seal clamp 3/1 1 Bottom bush 3/ Bottom spindle 3/003 1 M full nut (2) M flat section spring washer (2) Washer Operating key (sold separately) 3/ SEAL KIT 3/00SK contains all parts marked REPAIR KIT 3/50RKB contains all parts marked Fort Vale Engineering Ltd. 20 Page BUTT02 REV

16 /5500B SERIAL No: 35 MATERIAL: VARIOUS MAWP:.0BAR TEMP RANGE MAX: 200 C MIN: -0 C Data TW0 Clamped 0mm Clamped - drilled TW0. Designed to clamp between two TW0 flanges with the bolts passing through the valve body holes. Left hand operated lockable handle with T.I.R. Contact parts manufactured in 31 stainless steel with PTFE seal. Options - TW0 style body. Fitting Details Example shown : /5500B 22.5 HOLES Ø1.0 EQUI-SPACED ON A PCD (TW0) Parts Drawing 5 Ø.1 Ø3.5 STD SERRATIONS Ø INLET Ø1. Ø11.3 Specification Weight Kg Design Pressure (MAWP) Bar ( PSI) Test Pressure. Bar (1.1 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) Approved to BS EN2 Description 3/5500B TW0 clamped butterfly valve /5500B TW0 clamped butterfly valve PTFE/CNAF TW0 envelope gasket 5/001 TW0 mating flange /515 BSP eccentric TW0 outlet flange Item Description 1 M countersunk setscrew Washer Barrel lock handle 3/005 M socket capscrew (2) M plain washer (2) Stuffing clamp 3/001 Stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring 2031 Spindle 3/ Split bearing 252/051 PTFE spindle seat 3/000 M full nut (2) Closure plate / Bottom spindle 3/003 1 Bottom bush 3/ M flat section spring washer (2) Butterfly valve body /0 1 PTFE seal / Nitrile O ring Seal clamp plate / Operating key (sold separately) 3/25 1 SEAL KIT /00SKB contains all parts marked REPAIR KIT /50RKB contains all parts marked Fort Vale Engineering Ltd. 20 Page 1 BUTT02 REV

17 /000B SERIAL No. 35 MATERIAL VARIOUS M.A.W.P..0 BAR DESIGN TEMP 200 C Data Clamped Widdop Clamped - left hand operated with TIR to handle and padlock facility. Contact parts manufactured in 31 stainless steel with PTFE main seal. Options - lockable handle. Congealing cargo version with semi-spherical closure plate. Version with high temperature seals. Pneumatic actuator available. of 2 and 3 clamped valves. Fitting Details Specification Part no. /000B.1 Weight Kg Design Pressure (MAWP) Bar ( PSI) Test Pressure Bar (15 PSI) Design Temperature -0 C to 200 C (-0 F to 32 F) M1 bolts torque setting 0 Nm Ø1. Ø11.3 Above information varies according to specification. Design approval by Lloyds Register of Shipping. Approved to BS EN Ø.1 Ø152. STD SERRATIONS Ø.1.3 CNAF/PTFE inlet gasket CNAF/PTFE outlet gasket Bolting kit ( x bolts, nuts, washers) /10 BSP outlet flange /0 BSP blank cap with PTFE washer 30PSC NPT outlet flange /0 NPT blank cap with PTFE washer 25/000 Description /000B Left hand standard butterfly valve /500B Left hand with semi-spherical closure plate /0HTB Fitted with high temperature seals Assembly Details Example Assembly IMPORTANT NOTE BUTTERFLY VALVE MUST BE ASSEMBLED TO THE FOOTVALVE/TANK OUTLET PIPEWORK WHILST IN THE CLOSED POSITION. Fort Vale Engineering Ltd /000B /0 30PSC Page /10 15 BUTT01 REV

18 Parts drawing Clamped Widdop Item Description 1 Split ring 3/ Sockethead setscrew Washer 2030 Operating lever 3/3 5 Handle 3/0050 Handle location spring 3/00 Handle location pin 3/00 Sockethead capscrew (2) Plain washer (2) Stuffing clamp 3/ PTFE stuffing clamp bush 3/0301 PTFE O ring (2) 2033 Viton O ring Spindle 3/ Split bearing 252/051 1 PTFE spindle seat 3/000 1 Closure plate /000 1 Lower spindle 3/003 1 PTFE lower spindle bush 3/ Spring washer (2) Full nut (2) Body / PTFE main seal / Nitrile O ring Seal clamp plate /5505 SEAL KIT Part number /00SKB contains all parts marked REPAIR KIT Part number /00RKB contains all parts marked SELF ADHESIVE DECAL - PART NO. 32/0300 Text in English, German and French A detailed step-by-step repair manual is now available for our range of discharge butterfly valves. Please contact our Sales team for further information. Fort Vale Engineering Ltd. 20 Page 1 BUTT01 REV

19 Page 1 THIS PAGE IS INTENTIONALLY BLANK

20 Fort Vale UK Head Office & Manufacturing Plant Tel : + (0)2 0 Fax : + (0)2 1 sales@fortvale.com Fort Vale USA Tel : Fax : ussales@fortvale.com Fort Vale Netherlands Tel : +31 (0) 3333 Fax : +31 (0) bvsales@fortvale.com Fort Vale Russian Federation Tel : rw@fortvale.ru All goods supplied will be subject to Fort Vale Engineering Ltd Terms and Conditions of Sale (Ref. FV) which are available upon request, or may be viewed at Please note that this brochure and the contents herein remain the property of Fort Vale Engineering Limited. This brochure may not be copied or reproduced, or the information contained herein divulged to any third party without the prior written permission of Fort Vale Engineering Limited. Repair/refurbishment/resetting of Fort Vale valves may be carried out only by trained and authorised personnel. Fort Vale Engineering Limited shall not, in any circumstances, be liable for injuries, losses, expenses or damage, direct or consequential, sustained by the buyer or any person which may in any degree be attributable to the adoption, either by the buyer or any third party, of technical or other information, data or advice given on behalf of Fort Vale Engineering Limited or however otherwise caused in relation to the use of its products in accordance with Fort Vale Engineering Limited s recommendation. The specifications included in this catalogue are intended to be generic and must be interpreted as equivalent or functionally equivalent. The identification of many items is facilitated by illustrations (photographs and line drawings). The mention of, or reference to specific companies, national standards, or trade names, including those that might appear on the photographs, is intended for illustration purposes only. It does not imply an endorsement, preference or availability of any specific standard, brand or supplier. The data and information contained herein is being provided for information only and without responsibility, and Fort Vale Engineering Limited makes no representations or warranties, either expressed or implied, as to the accuracy, completeness, or fitness for a particular purpose. Fort Vale Engineering Limited does not accept any responsibility or liability with regard to the reliance on, or use of this data and information. Fort Vale Engineering Ltd. 201 REV_ Fort Vale P.R. China Tel : Fax : cnsales@fortvale.com Fort Vale Singapore Tel : Fax : sgsales@fortvale.com Fort Vale Australia Tel : ausales@fortvale.com