PVC AND CPVC PRESSURE PIPES ASTM D-1785 and F-441 Schedule 80

Transcription

1 2 PVC AN CPVC PRESSURE PIPES ASTM an F-441 Scheule 80 PVC ASTM 1785 SCHEULE 80 NOMINAL OUTSIE IAMETER PVC SCHEULE 80 WALL THICKNESS WORKING PRESSURE WEIGHT IN IN MM IN MM LB/FT / / / / / / / / ERATING FACTOR PVC TEMP (F) FACTOR CPVC ASTM F441 SCHEULE 80 NOMINAL OUTSIE IAMETER PVC SCHEULE 80 WALL THICKNESS WORKING PRESSURE WEIGHT IN IN MM IN MM LB/FT / / / / / / / ERATING FACTOR CPVC TEMP (F) FACTOR PVC/CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 2.11

2 PVC AN CPVC PRESSURE PIPES ASTM an F-441 Scheule 40 2 PVC ASTM 1785 SCHEULE 40 NOMINAL OUTSIE IAMETER PVC SCHEULE 40 WALL THICKNESS WORKING PRESSURE WEIGHT IN IN MM IN MM LB/FT / / / / / / / / ERATING FACTOR PVC TEMP (F) FACTOR CPVC ASTM F441 SCHEULE 40 NOMINAL OUTSIE IAMETER CPVC SCHEULE 40 WALL THICKNESS WORKING PRESSURE WEIGHT IN IN MM IN MM LB/FT / / / / / / / ERATING FACTOR CPVC TEMP (F) FACTOR PVC/CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 2.10

3 PVC SCHEULE 80 FITTINGS Manufacturer s Prouct Specification 3 Scope This specification sheet covers the manufacturer s requirements for PVC Scheule 80 pipe fittings. These fittings meet or excee the stanars set by the American Society for Testing an Materials an the National Sanitation Founation. PVC Materials Rigi PVC (polyvinyl chlorie) use in the manufacture of Scheule 80 fittings is Type I, Grae 1 compoun as state in ASTM Raw material use in moling shall contain the specifie amounts of color pigment, stabilizers, an other aitives approve by the National Sanitation Founation. imensions Physical imensions an tolerances of PVC Scheule 80 IPS (Iron Pipe Size) fittings meet the requirements of ASTM specification for all fittings. Threae fittings have tapere pipe threas in accorance with ANSI/ASME B Marking PVC Scheule 80 fittings are marke as prescribe in ASTM to inicate the manufacturer s name or traemark, size of fitting, an ASTM esignation

4 3 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances Tees L L H H s x s s x t TEE - S x S 1 2 L H APPROX. WT /2" /4" " /4" /2" " /2" " " " " " " " " " " " " TEE - S x T 1 2 L H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanar PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.07

5 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 Reucing Tees 1 2 L2 3 4 s x S RE TEE - S x S L2 APPROX. WT /4" > 1/2" > 1/2" > 3/4" /4 > 1/2" /4 > 3/4" /4 > 1" /2 > 1/2" /2 > 3/4" /2 > 1" /2 > 1 1/4" > 1/2" > 3/4" > 1" > 1 1/4" > 1 1/2" /2 > 1 1/2" /2 > 2" > 1" > 1 1/2" > 2" > 2 1/2" > 2" > 2 1/2" > 3" > 3" > 4" > 6" > 8" > 10" Physical imensions an tolerances meet the requirements of ASTM Stanar PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.08

6 3 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 45º Elbows H H s x s s x t 45 ELL - S x S 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " " " " " " " " " " " NOMINAL 45 ELL - S x T 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanar PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.09

7 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 90º Elbows H H s x s s x t 90 ELL - S x S 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " " " " " " " " " " " ELL - S x T 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanar PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.10

8 3 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances Couplings L L 2 1 s x s 2 1 s x t NOMINAL COUPLING - S x S 1 2 L APPROX. WT /2" /4" " /4" /2" " /2" " " " " " " " " " " " " COUPLING - T x T 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanar PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.11

9 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 Reucing Bushes 1 2 L2 s x s NOMINAL REUCER - S x S 1 2 L2 APPROX. WT /4" > 1/2" > 1/2" > 3/4" /4 > 1/2" /4 > 3/4" /4 > 1" /2 > 1/2" /2 > 3/4" /2 > 1" /2 > 1 1/4" > 1/2" > 3/4" > 1" > 1 1/4" > 1 1/2" /2 > 1 1/2" /2 > 2" > 1" > 1 1/2" > 2" > 2 1/2" > 2" > 2 1/2" > 3" > 4" > 2" > 3" > 4" > 2" > 3" > 4" > 6" > 4" > 6" > 8" > 8" > 10" > 12" > 14" > 16" > 16" > 18" > 20" Physical imensions an tolerances meet the requirements of ASTM Stanar PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.12

10 3 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances Female Reucing Bushes 1 2 L2 s x T REUCER - S x T 1 2 L2 APPROX. WT /2 > 3/8" /2 > 1/4" /4 > 1/4" /4" > 1/2" > 1/2" > 3/4" /4 > 1/2" /4 > 3/4" /4 > 1" /2 > 1/2" /2 > 3/4" /2 > 1" /2 > 1 1/4" > 1/2" > 3/4" > 1" > 1 1/4" > 1 1/2" > 2" > 2" > 3" Physical imensions an tolerances meet the requirements of ASTM Stanar PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.13

11 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 Van Stone Flanges NOMINAL FLANGE S x S C M T L ФE- N APPROX. WT /2" /4" " /4" /2" " /2" " " " " " " " " " " " " C T L E s x s M WTF TM Flanges T NOMINAL FLANGE S x S 1 2 C T ФE- N APPROX. WT /2" " /2" " " " " " " C E 1 2 s x s Physical imensions an tolerances meet the requirements of ASTM Stanar PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.14

12 3 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances Unions L2 S x S L2 S x T UNION - S x S 1 2 L2 APPROX. WT /2" /4" " /4" /2" " /2" " " UNION - T x T 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanar PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.15

13 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 Nipples L L L CLOSE HEX LONG NOM. PIPE CLOSE HEX 3 LONG 4 LONG 5 LONG 6 LONG 8 LONG 10 LONG 12 LONG NO. L NO. L NO. NO. NO. NO. NO. NO. NO. 1/ / / / / / / / / / / / / / / / t / Male Aaptors 1 2 Female Aaptors 1 2 L2 L2 S x T S x T NOMINAL AAPTOR S x T 1 2 L2 APPROX. WT /2" /4" " /4" /2" " /2" " " NOMINAL AAPTOR S x T 1 2 L2 APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanar PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.16

14 3 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances Wyes H1 L L H S x S x S WYE - S x S x S 1 2 L H APPROX. WT /2" /4" " 43.0t /4" /2" " /2" " " " " Crosses S x S x S x S NOMINAL CROSS S x S x S x S 1 2 L H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanar PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.17

15 PVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 WTF TM Series Universal Van Stone Backing Rings ØE T M C W NOMINAL WTF FLANGE S x S M C T ФE-N W APPROX. WT /2" /4" " /4" /2" " /2" " " " " Flange bolt hole patterns meet ANSI B16.5 as well as BS PVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.18

16 3 CPVC SCHEULE 80 FITTINGS Manufacturer s Prouct Specification Scope This specification sheet covers the manufacturer s requirements for CPVC Scheule 80 pipe fittings. These fittings meet or excee the stanars set by the American Society for Testing an Materials an the National Sanitation Founation. CPVC Materials Rigi CPVC (chlorinate polyvinyl chlorie) use in the manufacture of Scheule 80 fittings is Type IV, Grae 1 compoun as state in ASTM Raw material use in moling shall contain the specifie amounts of color pigment, stabilizers, an other aitives approve by the National Sanitation Founation. imensions Physical imensions an tolerances of CPVC Scheule 80 IPS (Iron Pipe Size) fittings meet the requirements of ASTM specification F-439 for socket type fittings an ASTM F-437 for threae fittings. Threae fittings have tapere pipe threas in accorance with ANSI/ASME B Marking CPVC Scheule 80 fittings are marke as prescribe in ASTM F-439 an F-437 to inicate the manufacturer s name or traemark, size of fitting, an ASTM esignation F-439 (socket) or F-437 (threae). 3.19

17 CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 Tees L L H H s x s s x t TEE - S x S 1 2 L H APPROX. WT /2" /4" " /4" /2" " /2" " " " " " " " " " " " " TEE - S x T 1 2 L H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanars F-439 for socket type fittings an F-437 for threae fittings. CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.20

18 3 CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances Reucing Tees 1 2 L2 3 4 s x S RE TEE - S x S L2 APPROX. WT /4" > 1/2" > 1/2" > 3/4" /4 > 1/2" /4 > 3/4" /4 > 1" /2 > 1/2" /2 > 3/4" /2 > 1" /2 > 1 1/4" > 1/2" > 3/4" > 1" > 1 1/4" > 1 1/2" /2 > 1 1/2" /2 > 2" > 1" > 1 1/2" > 2" > 2 1/2" > 2" > 2 1/2" > 3" > 3" > 4" > 6" > 8" > 10" Physical imensions an tolerances meet the requirements of ASTM Stanars F-439 for socket type fittings an F-437 for threae fittings. CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.21

19 CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 45º Elbows H H s x s s x t 45 ELL - S x S 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " " " " " " " " " " " ELL - S x T 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanars F-439 for socket type fittings an F-437 for threae fittings. CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification.

20 3 CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 90º Elbows H H s x s s x t 90 ELL - S x S 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " " " " " " " " " " " ELL - S x T 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanars F-439 for socket type fittings an F-437 for threae fittings. CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.23

21 CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 Couplings L L 2 1 s x s 2 1 s x t COUPLING - S x S 1 2 L APPROX. WT /2" /4" " /4" /2" " /2" " " " " " " " " " " " " COUPLING - T x T 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanars F-439 for socket type fittings an F-437 for threae fittings. CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.24

22 3 Reucing Bushes CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 1 2 L2 s x s REUCER - S x S 1 2 L2 APPROX. WT /4 > 1/2" > 1/2" > 3/4" /4 > 1/2" /4 > 3/4" /4 > 1" /2 > 1/2" /2 > 3/4" /2 > 1" /2 > 1 1/4" > 1/2" > 3/4" > 1" > 1 1/4" > 1 1/2" /2 > 1 1/2" /2 > 2" > 1" > 1 1/2" > 2" > 2 1/2" > 2" > 2 1/2" > 3" > 4" > 2" > 3" > 4" > 2" > 3" > 4" > 6" > 4" > 6" > 8" > 8" > 10" > 12" > 14" > 16" > 16" > 18" > 20" Physical imensions an tolerances meet the requirements of ASTM Stanars F-439 for socket type fittings an F-437 for threae fittings. CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.25

23 CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 Female Reucing Bushes 1 2 L2 s x T REUCER - S x T 1 2 L2 APPROX. WT /2 > 3/8" /2 > 1/4" /4 > 1/4" /4" > 1/2" > 1/2" > 3/4" /4 > 1/2" /4 > 3/4" /4 > 1" /2 > 1/2" /2 > 3/4" /2 > 1" /2 > 1 1/4" > 1/2" > 3/4" > 1" > 1 1/4" > 1 1/2" > 2" > 2" > 3" Physical imensions an tolerances meet the requirements of ASTM Stanars F-439 for socket type fittings an F-437 for threae fittings. CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.26

24 3 CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances Van Stone Flanges NOMINAL FLANGE S x S C M T L ФE- N APPROX. WT /2" /4" " /4" /2" " /2" " " " " " " " " " " " " C T L E M s x s WTF Flanges T NOMINAL FLANGE S x S 1 2 C T ФE- N APPROX. WT. E /2" " /2" " C " " " " " s x s Physical imensions an tolerances meet the requirements of ASTM Stanars F-439 for socket type fittings an F-437 for threae fittings. CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.27

25 CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 Unions L2 L2 S x S S x T UNION - S x S 1 2 L2 APPROX. WT /2" /4" " /4" /2" " /2" " " UNION - T x T 1 2 H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanars F-439 for socket type fittings an F-437 for threae fittings. CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.28

26 3 CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances Nipples L L L CLOSE HEX LONG NOM. PIPE CLOSE HEX 3 LONG 4 LONG 5 LONG 6 LONG 8 LONG 10 LONG 12 LONG NO. L NO. L NO. NO. NO. NO. NO. NO. NO. 1/ / / / / / / / / / / / / / / / t / Male Aaptors 1 2 Female Aaptors 1 2 L2 L2 S x T S x T NOMINAL AAPTOR S x T 1 2 L2 APPROX. WT /2" /4" " /4" /2" " /2" " " NOMINAL AAPTOR S x T 1 2 L2 APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanars F-439 for socket type fittings an F-437 for threae fittings. CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.29

27 CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances 3 Wyes H1 L L H S x S x S NOMINAL WYE - S x S x S 1 2 L H APPROX. WT /2" /4" " /4" /2" " /2" " " " " Crosses S x S x S x S CROSS - S x S x S x S 1 2 L H APPROX. WT /2" /4" " /4" /2" " /2" " " Physical imensions an tolerances meet the requirements of ASTM Stanars F-439 for socket type fittings an F-437 for threae fittings. CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification.

28 3 CPVC SCHEULE 80 FITTINGS Weights, imensions an Tolerances WTF TM Series Universal Van Stone Backing Rings ØE T M C W NOMINAL WTF FLANGE S x S M C T ФE-N W APPROX. WT /2" /4" " /4" /2" " /2" " " " " Flange bolt hole patterns meet ANSI B16.5 as well as BS CPVC material meets ASTM Stanar imensions are subject to change without notice. Contact your HYROSEAL representative for certification. 3.31

29 ACCESSORIES Cements - 45 Callibre PVC Cement 6 GENERAL ESCRIPTION: Hyroseal Canaa 45 Callibre PVC Cement is a clear or gray, extra heavy boie, meium setting, high strength PVC solvent cement for all classes an scheules of pipe an fittings, incluing Scheule 80, with interference fit through 12 inch iameter an non-pressure applications up to 18 inch iameter. It has goo gap filling properties an is recommene for solvent cementing joints where a sizable gap exists between pipe an fitting e.g. large pipe sizes an when more working time is require in warm weather. APPLICATION: Hyroseal Canaa 45 Callibre PVC Cement can be for use on all types of PVC plastic pipe applications, Type I an Type II. It is suitable for use with potable water pressure systems, irrigation, turf, conuit, inustrial pipe applications, sewer, rain, waste an vent systems. etaile irections on making solvent cemente joints are printe on the container label. An installation V/C covering solvent cementing is available. It not only escribes the basic principles of solvent cementing, but also covers the hanling, storage an use of our proucts. It is highly recommene that the installer review the instructions supplie by the pipe an fitting manufacturer. NOTE: Hyroseal Canaa solvent cements must never be use in a PVC system using or being teste by compresse air or gases; incluing air-over-water booster. STANARS AN CERTIFICATION LISTINGS: Meets ASTM 2564 Stanar. Liste by NSF International for compliance with ASTM 2564, NSF/ANSI Stanar 14 for use on potable water, rain, waste, vent an sewer applications. SPECIFICATIONS: COLOR: Clear or Gray RESIN PVC SPECIFIC GRAVITY: ± 0.04 BROOKFIEL VISCOSITY: Clear: Minimum 1,600 CP@ 73 ± 2 F (23 ± 1 C) Gray: Minimum 2,000 CP@ 73 ± 2 F (23 ± 1 C) SHIPPING: For One Liter an Above Proper Shipping Name: Ahesive Hazar Class: 3 Ientification Number: UN 1133 Packing Group: II Label Require: Flammable Liqui For Less than One Liter Proper Shipping Name: Consumer Commoity Hazar Class: ORM- SHELF LIFE: 3 years in tightly seale containers. The ate coe of manufacture is stampe on the bottom of the container. Stability of the prouct is limite by the evaporation of the solvent when the container is opene. Evaporation of solvent will cause the cement to thicken an reuce its effectiveness. Aing of thinners to change viscosity is not recommene an may significantly change the properties of the cement. QUALITY ASSURANCE: Hyroseal Canaa 45 Callibre PVC Cement is evaluate to assure that consistent high quality is maintaine. Fourier transform infrare spectroscopy, gas chromatography, an aitional in epth testing ensures each batch is manufacture to exacting stanars. A batch ientification coe is stampe on each can an assures traceability of all materials an processes use in manufacturing this solvent cement. AVAILABILITY: PVC 45 CALLIBRE ESCRIPTION COLOR CARTON N.W (KGS) G.W (KGS) VOL (CU/FT) oz oz oz 45 CALLIBRE CLEAR oz PVC 45 CALLIBRE ESCRIPTION COLOR CARTON N.W (KGS) G.W (KGS) VOL (CU/FT) oz oz oz 45 CALLIBRE GREY oz

30 6 ACCESSORIES Cements - 40 Callibre PVC Cement GENERAL ESCRIPTION: Hyroseal Canaa 40 Callibre PVC Cement is a clear, heavy boie, meiium setting, high strength PVC solvent cement for all classes an scheules of pipe an fittings with interference fit through 8 inch iameter. Can be use without primer on non-pressure systems if local coes permit. APPLICATION: Hyroseal Canaa 40 Callibre PVC Cement is for use on all types of PVC plastic pipe applications, Type I an Type II. It is suitable for use with potable water pressure systems, irrigation, turf, foam core, conuit, sewer, rain, waste an vent systems. etaile irections on making solvent cemente joints are printe on the container label. An installation V/C covering solvent cementing is available. It not only escribes the basic principles of solvent cementing, but also covers the hanling, storage an use of our proucts. It is highly recommene that the installer review the instructions supplie by the pipe an fitting manufacturer. NOTE: Hyroseal Canaa solvent cements must never be use in a PVC system using or being teste by compresse air or gases; incluing air-over-water booster. STANARS AN CERTIFICATION LISTINGS: Meets ASTM 2564 Stanar. Liste by NSF International for compliance with ASTM 2564, NSF/ANSI Stanar 14 for use on potable water, rain, waste, vent an sewer applications. SPECIFICATIONS: COLOR: Clear RESIN: PVC SPECIFIC GRAVITY: ± 0.04 BROOKFIEL VISCOSITY: Minimum ± 2 F (23 ± 1 C) SHIPPING: For One Liter an Above Proper Shipping Name: Ahesive Hazar Class: 3 Ientification Number: UN 1133 Packing Group: II Label Require: Flammable Liqui For Less than One Liter Proper Shipping Name: Consumer Commoity Hazar Class: ORM- SHELF LIFE: 3 years in tightly seale containers. The ate coe of manufacture is stampe on the bottom of the container. Stability of the prouct is limite by the evaporation of the solvent when the container is opene. Evaporation of solvent will cause the cement to thicken an reuce its effectiveness. Aing of thinners to change viscosity is not recommene an may significantly change the properties of the cement. QUALITY ASSURANCE: Hyroseal Canaa 40 Callibre PVC Cement is carefully evaluate to assure that consistent high quality is maintaine. Fourier transform infrare spectroscopy, gas chromatography, an aitional in epth testing ensures each batch is manufacture to exacting stanars. A batch ientification coe is stampe on each can an assures traceability of all materials an processes use in manufacturing this solvent cement. AVAILABILITY: PVC 40 CALLIBRE ESCRIPTION COLOR CARTON N.W(KGS) G.W (KGS) VOL (CU/FT) oz oz oz 40 CALLIBRE CLEAR oz

31 ACCESSORIES Cements - 45 Callibre CPVC Cement 6 GENERAL ESCRIPTION: Hyroseal Canaa 45 Callibre CPVC Cement is gray, low VOC emissions extra heavy boie, meium setting, high strength CPVC solvent cement for all classes an scheules of pipe an fittings with interference fit, incluing Scheule 80 through 12 inch iameter. Also recommene for PVC inustrial piping systems for chemical applications. APPLICATION: Hyroseal Canaa 45 Callibre CPVC Cement is especially formulate for use on inustrial piping systems (CPVC or PVC) requiring chemical resistance to caustics, incluing hypochlorite solutions, mineral acis, aggressive water an aqueous salt solutions. Approve for use with Corzan Inustrial Piping Systems. etaile irections on making solvent cemente joints are printe on the container label. An installation V/C covering solvent cementing is available. It not only escribes the basic principles of solvent cementing, but also covers the hanling, storage an use of our proucts. It is highly recommene that the installer review the instructions supplie by the pipe an fitting manufacturer. NOTE: Hyroseal Canaa solvent cements must never be use in CPVC an PVC systems using or being teste by compresse air or gases; incluing air-over-water booster. STANARS AN CERTIFICATION LISTINGS: Meets ASTM F 493 Stanar. Meets SCAQM Rule 1168/316A. Compliant with LEE (Leaership in Energy an Environmental esign). When using this Hyroseal Canaa low VOC prouct, creit can be claime for LEE Green Builing Rating System Inoor Environmental Quality. Liste by NSF International for compliance with ASTM F 493, NSF/ANSI Stanar 14 for use on potable water, rain, waste, vent an sewer applications. SPECIFICATIONS: COLOR: Gray RESIN: CPVC SPECIFIC GRAVITY: ± BROOKFIEL VISCOSITY: Minimum 2, ± 2 F (23 ± 1 C) SHIPPING: For One Liter an Above Proper Shipping Name: Ahesive Hazar Class: 3 Ientification Number: UN 1133 Packing Group: II Label Require: Flammable Liqui For Less than One Liter Proper Shipping Name: Consumer Commoity Hazar Class: ORM- SHELF LIFE: 2 years in tightly seale containers. The ate coe of manufacture is stampe on the bottom of the container. Stability of the prouct is limite by the evaporation of the solvent when the container is opene. Evaporation of solvent will cause the cement to thicken an reuce its effectiveness. Aing of thinners to change viscosity is not recommene an may significantly change the properties of the cement. QUALITY ASSURANCE: Hyroseal Canaa 45 Callibre CPVC Cement is carefully evaluate to assure that consistent high quality is maintaine. Fourier transform infrare spectroscopy, gas chromatography, an aitional in epth testing ensures each batch is manufacture to exacting stanars. A batch ientification coe is stampe on each can an assures traceability of all materials an processes use in manufacturing this solvent cement. AVAILABILITY: CPVC 45 CALLIBRE ESCRIPTION COLOR CARTON N.W(KGS) G.W(KGS) VOL (CU/FT) oz oz oz 45 CALLIBRE GREY oz

32 6 ACCESSORIES Cements - 40 Callibre CPVC Cement GENERAL ESCRIPTION: Hyroseal Canaa 40 Callibre CPVC Cement is an orange, heavy boie, meium setting, high strength CPVC solvent cement for all classes an scheules of CPVC pipe an fittings with interference fit through 8 inch iameter, incluing Scheule 80. It has goo gap filling properties an its meium set allows more working time in warm weather. APPLICATION: Hyroseal Canaa 40 Callibre CPVC Cement is for use on col an hot water systems up to 180 F (82 C) maximum, in inustrial piping, resiential, recreational vehicles an mobile homes plumbing. It can be use on copper tube size CPVC pipe an fittings. etaile irections on making solvent cemente joints are printe on the container label. An installation V/C covering solvent cementing is available. It not only escribes the basic principles of solvent cementing, but also covers the hanling, storage an use of our proucts. It is highly recommene that the installer review the instructions supplie by the pipe an fitting manufacturer. NOTE: Hyroseal Canaa solvent cements must never be use in a CPVC system using or being teste by compresse air or gases; incluing air-over-water booster. STANARS AN CERTIFICATION LISTINGS: Meets ASTM 2846 an F 493 Stanar. Liste by NSF International for compliance with ASTM 2846, NSF/ANSI Stanar 14 for use on potable water, rain, waste, vent an sewer applications. SPECIFICATIONS: COLOR: Orange RESIN: CPVC SPECIFIC GRAVITY: ± BROOKFIEL VISCOSITY: Minimum 1, ± 2 F (23 ± 1 C) SHIPPING: For One Liter an Above Proper Shipping Name: Ahesive Hazar Class: 3 Ientification Number: UN 1133 Packing Group: II Label Require: Flammable Liqui For Less than One Liter Proper Shipping Name: Consumer Commoity Hazar Class: ORM- SHELF LIFE: 2 years in tightly seale containers. The ate coe of manufacture is stampe on the bottom of the container. Stability of the prouct is limite by the evaporation of the solvent when the container is opene. Evaporation of solvent will cause the cement to thicken an reuce its effectiveness. Aing of thinners to change viscosity is not recommene an may significantly change the properties of the cement. QUALITY ASSURANCE: Hyroseal Canaa 40 Callibre CPVC Cement is carefully evaluate to assure that consistent high quality is maintaine. Fourier transform infrare spectroscopy, gas chromatography, an aitional in epth testing ensures each batch is manufacture to exacting stanars. A batch ientification coe is stampe on each can an assures traceability of all materials an processes use in manufacturing this solvent cement. AVAILABILITY: CPVC 40 CALLIBRE ESCRIPTION COLOR CARTON N.W(KGS) G,W(KGS) VOL (CU/FT) oz oz oz 40 CALLIBRE ORANGE oz

33 ACCESSORIES Primer - 90 Callibre Primer 6 GENERAL ESCRIPTION: Hyroseal Canaa 90 Callibre Primer is a low VOC emission, non-boie, fast acting, primer. The strong, aggressive action of 90 Callibre Primer rapily softens an issolves the joining surfaces of PVC an CPVC pipe an fittings. The benefit of this priming action is especially noticeable on parts being joine together in col weather. Available in clear an purple; the latter allows easy ientification when use on the joining surfaces. APPLICATION: Hyroseal Canaa 90 Callibre Primer, when use in conjunction with appropriate Hyroseal Canaa solvent cements, will make consistently strong, wellfuse joints. It is essential that the joining surfaces of pipe an fittings be softene an remains softene prior to assembly. The main function of the primer is to expeite the penetration an softening of the surfaces. Its rate of penetration into the joining surfaces is more rapi than that of solvent cement alone. 90 Callibre Primer is suitable for use with all types, classes an scheules of PVC an CPVC pipe an fittings. etaile irections on making solvent cemente joints are printe on the container label. An installation V/C covering solvent cementing is available. It not only escribes the basic principles of solvent cementing, but also covers the hanling, storage an use of our proucts. It is highly recommene that the installer review the instructions supplie by the pipe an fitting manufacturer. NOTE: Hyroseal Canaa solvent cements must never be use in a CPVC system using or being teste by compresse air or gases; incluing air-over-water booster. STANARS AN CERTIFICATION LISTINGS: Meets ASTM F 656 Stanar. Meets SCAQM Rule 1168/316A. Compliant with LEE (Leaership in Energy an Environmental esign). When using this Hyroseal Canaa low VOC prouct, creit can be claime for LEE Green Builing Rating System Inoor Environmental Quality. Liste by NSF International for compliance with ASTM F 656, NSF/ANSI Stanar 14 for use on potable water, rain, waste, vent an sewer applications. SPECIFICATIONS: SHIPPING: COLOR: Clear or Purple For One Liter an Above For Less than One Liter SPECIFIC GRAVITY: ± Proper Shipping Name: Flammable Liqui Proper Shipping Name: Consumer Commoity BROOKFIEL VISCOSITY: Water Thin n.o.s. (Methyl Ethyl Ketone, Tetrahyrofuran) Hazar Class: ORM- Hazar Class: 3 Ientification Number: UN 1993 Packing Group: II Label Require: Flammable Liqui SHELF LIFE: 3 years in tightly seale containers. The ate coe of manufacture is stampe on the bottom of the container. Stability of the prouct is limite by the evaporation of the solvent when the container is opene. Aing of solvents is not recommene an may significantly change the properties of the primer. QUALITY ASSURANCE: Hyroseal Canaa 90 Callibre Primer is carefully evaluate to assure that consistent high quality is maintaine. Fourier transform infrare spectroscopy, gas chromatography, an aitional in epth testing ensures each batch is manufacture to exacting stanars. A batch ientification coe is stampe on each can an assures traceability of all materials an processes use in manufacturing this prouct. AVAILABILITY: PRIMER 90 CALLIBRE PRIMER 90 CALLIBRE ESCRIPTION COLOR CARTON N.W (KGS) G.W (KGS) VOL (CU/FT) ESCRIPTION COLOR CARTON N.W (KGS) G.W (KGS) VOL (CU/FT) oz oz oz 90 CALLIBRE CLEAR oz oz oz oz 90 CALLIBRE PURPLE oz