PARTS CATALOG 0CNP3-M90400EN

Size: px

Start display at page:

Download "PARTS CATALOG 0CNP3-M90400EN"

Arron Hodges
5 years ago
Views:

1 PARTS CATALOG 0CNP-M9000EN Last update Mar., 0

2 Directions for the Parts Catalog..The parts stipulated in this Parts Catalog are not necessarily standard equipped parts..parts may change without prior notice..the following is an example of the Parts Catalog format. 0CF0-G60 9. FUEL INJECTION PUMP(W/BOOST) (A)=JH-DT JH-DTZ JH-DTZP JH-DTZA JH-DTZY Q'TY (C) (D) (E) REF. LEV. PARTS NO. DESCRIPTION (A) (B) (F) FUEL INJECTION PUMP FUEL INJECTION PUMP N (A=E0085) (B=E0000) SCREW M 6X SCREW M 6X 6 K (A=E0056) (B=E0056) (C=E0056) (D=E0056) (E=E0056) CAMSHAFT BEARING, ROLLER RETAINER 5 Remarks () BOOST COMPEMSATOR TYPE. OPTIONAL PART, TO E0055,(JH-DT, JH-DTZ 5 Ref. No. The Ref. No. listed may not be in accordance with the illustration Ref. No. (Ex.) Illustration No. List Ref No. (Before change) - (After change) For interchangeable symbols N, R and K, illustrations for new parts may be abbreviated. Lev. (Level) Level indication The numbers below indicate the level of relativity towards the main part Main parts (Assembly parts) Sub component included in Sub component included in. Note) Parts that are not for sale are partially illustrated but not listed. Interchangeability Mark When a part change takes place, one of the following interchangeability symbols is indicated beside the part. Symbol N Q R S W Z F K Interchangeability Old Yes No New No Old Yes New Old Yes Yes New Old No No New Contents note New Part is interchangeable for Old Part but Old Part is not interchangeable for New Part. New Part is not interchangeable for Old Part but Old Part is interchangeable for New Part. New/ Old Parts are both interchangeable. New/ Old Parts are both not interchangeable. Part newly added. Part discontinued. Not interchangeable by a single part but interchangeable together with related parts. Changes only for used parts quantities. Effective Machine No. When a part changes, the effective Machine No. will be indicated in the (A)-(F) column. Product Symbol Product No. Product Symbol Product No. C Clutch No. Compressor No. F Machine No. (Agricultural Equip.) D Drive No. M Machine No. E Engine No. Note ) A date may follow the symbol. (Ex.) Note ) XXXXX and ZZZZZ are for parts that could not be predicted or for engine models that could not be identified. Note ) (A=E0085) is the E (Engine Serial Number) for the column (A) model (in this case JH-DT) after the parts design change. Remarks Mark Figures or alphabets (symbols) are entered in the remarks column. The comments (remarks) on parts that are indicated at the bottom of the illustration are the same symbols as those stated above.

4 Contents Fig. No. Fig. Name ENGINE UNIT(L00AESE Fig. No. Fig. Name. HST. CYLINDER BLOCK. TOOL & LABEL. CYLINDER HEAD & BONNET. AIR CLEANER & MUFFLER 5. CRANKSHAFT,PISTON & CAMSHAFT 6. L.O PUMP 7. COOLING DEVICE 8. FUEL OIL INJECTION PUMP 9. FUEL OIL TANK & FUEL OIL LINE 0. STARTING MOTOR & DYNAMO CONTROL UNIT. HANDLE. CONTROL PANEL. DRIVE CLUCH LEVER 5. SNOW REMOVING CLUCH LEVER 6. SIDE CLUCH 7. MAIN CHANGE 8. BRAKE CONTROL 9. SHOOTER LEVER 0. SNOW REMOVING UNIT CONTROL ENGINE RELATE SEC. ENGINE RELATED. ENGINE MOUNTING. ENGINE CONTROL SHASSIS & CRAWLER. SHASSIS. CRAWLER TRANSMISSION TRV SEC. TRAVEL CLUTCH 5. BELT TRANSMISSION 6. TRAVEL TRANSMISSION 7. BRAKE ELECTRICAL PARTS SEC. HARNESS,BATTERY. SWITCHS 5. LAMPS,STOP MOTOR 6. RELAY 8. TRANSMISSION CASE 9. AXLE CASE 0. CHANGE FITTING PARTS UNIT 7. BONNET

5 Contents Fig. No. Fig. Name Fig. No. Fig. Name 8. COVER,BONNET KEEL SNOW REMOVING UNIT 9. SNOW REMOVING FRAME 0. AUGER SIDE BOARD,AUGER BOTTOM. SHOOTER. DEFLECTOR. SHOOTER TURN. DEFLECTOR DRIVE 5. GEAR CASE 6. BLOWER SHAFT & AUGER SHAFT 7. AUGER & BLOWER 8. SNOW REMOVING MOUNTING LABELS & ACCESSORIES 9. LABELS 50. LABELS(SAFETY 5. TOOLS & ACCESSORIES

6 0CNP-M9000 Fig.. CYLINDER BLOCK (A)=L00AESEWH BLOCK ASSY, CYLINDER COVER BOLT, M0X PLATED NUT, CYLINDER HEAD BOLT, HEAD BOLT, HEAD NUT, CYLINDER HEAD WASHER GASKET, HEAD O-RING SHIM SET COVER GASKET PIN, M8X STUD, M6X STUD, M6X NUT, M GASKET, CRANK CASE COVER, CRANK CASE BEARING, MAIN BOLT, M8X 5 PLATED PLUG, PLUG, CAP ASSY O-RING, SPACER SENSOR GASKET, O-RING, AP WASHER, SEAL WASHER, SEAL RETAINER, BEARING BEARING, HR608GC BEARING, BALL 607C BEARING, SEAL, OIL TC SEAL, OIL TC BOLT, M8X PLATED BEARING, 0.5 US BEARING, 0.50 US NIPPLE, DRAIN WASHER, SEAL 6 Remarks () REPAIR PART. () UNDER-SIZE(U.S=0.5)PART. () UNDER-SIZE(U.S=0.5)PART. (REMARKS)"EFFECTIVE MACHINE NO." OF ENGINE IS INDICATED ON THE ENGINE LABEL WHICH IS SHOWN IN FIG.7.

7 0CNP-M9000 Fig.. TOOL & LABEL (A)=L00AESEWH LABEL, AIR COOLED LABEL, YANMAR LABEL F.W. LOCKING HANDLE REMOVER, FLYWHEEL BOLT M 6X 5 PLATED BOLT, M8X 5 PLATED NUT, M NUT, M GUIDE, OIL SEAL INSTALLING TOOL INSTALLING TOOL Remarks () OPTIONAL PART. (REMARKS)"EFFECTIVE MACHINE NO." OF ENGINE IS INDICATED ON THE ENGINE LABEL WHICH IS SHOWN IN FIG.7.

8 0CNP-M9000 Fig.. CYLINDER HEAD & BONNET (A)=L00AESEWH HEAD ASSY, CYLINDER VALVE, INTAKE VALVE, EXHAUST SPRING, VALVE RETAINER, SPRING COTTER, SUPPORT, ROCKER ARM SEAL, VALVE STEM 0-70 CAP, VALVE GASKET, NOZZLE SPACER, NOZZLE WASHER ARM, ROCKER SCREW, VALVE ADJUST NUT, M ARM ASSY, ROCKER SCREW, VALVE ADJUST NUT, M CAP, VALVE RETAINER, NOZZLE PIN, SPRING.0X BOLT, M0X 55 PLATED STUD, M6X NUT, M GASKET, BONNET BONNET ASSY, HEAD LEVER ASSY SPRING,DECOMPRESSION PIN, PARALLEL MX BOLT, M6X 70 PLATED Remarks (REMARKS)"EFFECTIVE MACHINE NO." OF ENGINE IS INDICATED ON THE ENGINE LABEL WHICH IS SHOWN IN FIG.7.

9 0CNP-M9000 Fig.. AIR CLEANER & MUFFLER (A)=L00AESEWH 650- GASKET, AIR CLEANER CLEANER ASSY, AIR 5-0 COVER ASSY, CLEANER CASE ASSY, CLEANER ELEMENT ASSY FILTER, PRE WASHER, SEAL M NUT, WING M NUT PIPE, AIR INTAKE GASKET BOLT, M6X 5 PLATED STUD, M6X STUD, M6X GASKET (NON-ASB.) MUFFLER ASSY BOLT, FLANGE M6X MUFFLER COVER COVER COVER BOLT, M8X 8 PLATED STUD, M8X NUT, M GASKET, AIR CLEANER SPACER SPACER HEATER, AIR V GASKET, AIR HEATER BOLT, M8X 0 PLATED STUD, M6X NUT, M6 Remarks (REMARKS)"EFFECTIVE MACHINE NO." OF ENGINE IS INDICATED ON THE ENGINE LABEL WHICH IS SHOWN IN FIG.7.

10 0CNP-M9000 Fig.5. CRANKSHAFT,PISTON & CAMSHAFT (A)=L00AESEWH CAMSHAFT ASSY TAPPET TAPPET ROD ASSY, PUSH CRANKSHAFT ASSY NUT, CYLINDER HEAD WASHER FLYWHEEL GEAR, RING KEY, 5X PISTON ASSY RING SET, PISTON PIN, PISTON D= CIRCLIP, ROD ASSY, CONNECTING BEARING, PISTON PIN BOLT, CONNECTING ROD BEARING, CRANK PIN SHAFT ASSY, BALANCER BEARING, BALL PISTON ASSY, 0.5 OS RING SET, 0.5 OS PISTON ASSY, 0.50 OS RING SET, 0.50 OS BEARING ASSY, BEARING, 0.50 US BEARING, BALL 60 Remarks () OVER-SIZE(O.S=0.5)PART. () OVER-SIZE(O.S=0.50)PART. () UNDER-SIZE(U.S=0.5)PART. () UNDER-SIZE(U.S=0.5)PART. (REMARKS)"EFFECTIVE MACHINE NO." OF ENGINE IS INDICATED ON THE ENGINE LABEL WHICH IS SHOWN IN FIG.7.

11 0CNP-M9000 Fig.6. L.O PUMP (A)=L00AESEWH PUMP ASSY, OIL COVER O-RING PIN, PARALLEL MX SCREW, TAPPING M6X FILTER ASSY, OIL -000 O-RING, AS COVER GASKET BOLT, M6X PLATED LEVER ASSY, GOVERNOR PIN, TAPER X GOVERNOR ASSY BEARING, NEEDLE SPRING, REGULATOR SPRING, RETURN SCREW NUT, LOCK M SEAL, OIL WASHER, THRUST WASHER, PLUG, R PIECE SPRING, RETURN SPRING, RETURN BOLT, ADJUSTING SCREW, M5X BOLT, M6X 0 PLATED LEVER, STOP LEVER, REGULATOR BRACKET BOLT, M6X PLATED SCREW, TAPPING M6X NUT, LOCK M LEAD WIRE, 0.6 Remarks (REMARKS)"EFFECTIVE MACHINE NO." OF ENGINE IS INDICATED ON THE ENGINE LABEL WHICH IS SHOWN IN FIG.7.

12 0CNP-M9000 Fig.7. COOLING DEVICE (A)=L00AESEWH COVER RUBBER, SEAL COLLAR GROMMET BOLT, M6X 0 PLATED CASE, COOLING FAN ABSORBER COLLAR SEAL, FAN CASE L= BOLT Remarks (REMARKS)"EFFECTIVE MACHINE NO." OF ENGINE IS INDICATED ON THE ENGINE LABEL WHICH IS SHOWN IN FIG.7.

13 0CNP-M9000 Fig.8. FUEL OIL INJECTION PUMP (A)=L00AESEWH PUMP ASSY, INJECTION GASKET PLATE BODY ASSY, PUMP SPRING, PLUNGER VALVE ASSY, DELIVERY SPRING, DELIVERY HOLDER, DELIVERY GASKET, DELIVERY LEVER ASSY, CONTROL SEAT, SPRING A SEAT, SPRING B PIN, SPRING.0X PIN, SPRING.0X VALVE ASSY,INJECTION VALVE ASSY,INJECTION NUT, NOZZLE D SPRING, NOZZLE SEAT, SPRING PLATE PIN HOLDER ASSY, NOZZLE 50-5 PIN SHIM SET Remarks (REMARKS)"EFFECTIVE MACHINE NO." OF ENGINE IS INDICATED ON THE ENGINE LABEL WHICH IS SHOWN IN FIG.7.

14 0CNP-M9000 Fig.9. FUEL OIL TANK & FUEL OIL LINE (A)=L00AESEWH TANK ASSY, FUEL CAP ASSY VALVE FILTER, FUEL GAUGE, LEVEL DAMPER, FUEL TANK RETAINER GASKET, 8X PLUG, FILTER ASSY, FUEL GASKET STAY, FUEL TANK STAY, FUEL TANK COCK ASSY, FUEL O-RING, AS BOLT WASHER, BOLT, M8X 5 PLATED NUT, M SCREW, TAPPING M6X CLIP, HOSE PIPE, FUEL L= PIPE, FUEL RETURN PIPE ASSY, FUEL CLIP, HOSE PIPE, FUEL RETURN BAND, TUBE, PROTECT PIPE ASSY, INJECTION SUPPORT Remarks (REMARKS)"EFFECTIVE MACHINE NO." OF ENGINE IS INDICATED ON THE ENGINE LABEL WHICH IS SHOWN IN FIG.7.

15 0CNP-M9000 Fig.0. STARTING MOTOR & DYNAMO (A)=L00AESEWH STARTER X5007 ARMATURE ASSY X550 BEARING, BALL X550 BEARING, BALL 5 X00 COIL ASSY, FIELD 6 X5 SCREW, CORE 7 X6900 BRUSH (+) 8 X9007 HOLDER ASSY, BRUSH 9 X5900 BRUSH (-) 0 X8 SPRING, BRUSH X800 COVER X760 LEVER COVER KIT X68005 BOLT, THROUGH 5 X5866 BOLT 6 X867 BOLT HOUSING ASSY, GEAR HOUSING, CENTER 9 X555 0 X65008 PINION SHAFT X9006 STOPPER SET X5506 CLUTCH ASSY X550 BALL BEARING X5550 BALL BEARING 5 X7 COVER (A), RUBBER BOLT, M0X 0 PLATED BRACKET LIMITER, CURRENT 5A BOLT, M6X PLATED BOLT, M6X 0 PLATED DYNAMO ASSY STATOR ASSY,.MM WHEEL, DYNAMO CLAMP, CORD BOLT, M6X PLATED BOLT, M6X 0 PLATED SCREW M 6X NUT, M8 Remarks (REMARKS)"EFFECTIVE MACHINE NO." OF ENGINE IS INDICATED ON THE ENGINE LABEL WHICH IS SHOWN IN FIG.7.

16 0CNP-M9000 Fig.. ENGINE RELATED (A)=YSRA050EX N80-00 PIPE COMPL., TAIL N COVER,TAIL N GASKET, EXH.PIPE N DUCT,FAN - N80-05 DUCT, FAN N (A=FXXXXX) 5 N HOSE, INTAKE 6 N80-0 MOUNT,STOP MOTOR 7 D BOLT, M6X 8 E BAND CLAMP, BOLT, M6X BOLT, M8X BOLT, M8X 5

17 0CNP-M9000 Fig.. ENGINE MOUNTING (A)=YSRA050EX N80-0 MOUNTING METAL BOLT, M0X BOLT, M0X 5

18 0CNP-M9000 Fig.. ENGINE CONTROL (A)=YSRA050EX N LEVER, AXLE N ROD, ACCELE KNOB, 6.5X8X5 E WASHER, 0.5X8X. 5 E WASHER, SPRING BOLT, M6X 5 PLATED NUT, M NUT, M0

19 0CNP-M9000 Fig.. TRAVEL CLUTCH (A)=YSRA050EX N80-00 ARM,TENSION BUSH X0 N80-00 ARM,FRONT COUPLING N90- SHAFT L CMP.,TENSION 5 N90- SHAFT R CMP.,TENSION 6 N80-5 ARM,TENSION(AUGER 7 N80-5 LINK,AUGER BRAKE 8 N80-7 NUT, 9 N70-5 SPRING,BRAKE 0 N70-5 SPRING,BRAKE E0-50 BOLT 8X5 E ROLLER ASSY, TENSION E ROLLER, TENSION WASHER, WASHER, WASHER, SPRING RING, RING, RING, PIN, SPRING 5.0X PIN, SPRING 5.0X PIN, SNAP 8

20 0CNP-M9000 Fig.5. BELT TRANSMISSION (A)=YSRA050EX N80-00 PULLEY,ENGINE N80-50 PULLEY N80-50 RETAINER COMP.,BELT N90-0 RETAINER,BELT 5 N80-80 BRACKET,BELT RETNR. 6 N90-8 V-BELT 7 N WASHER XX KEY 5X KEY, 7X V-BELT, BH BOLT, M0X BOLT, M8X BOLT, M8X NUT, M NUT, M BOLT, M8X 5

21 0CNP-M9000 Fig.6. TRAVEL TRANSMISSION (A)=YSRA050EX C60-0 COLLAR, 0XX N80-0 GEAR,BEVEL N90-00 SHAFT ST N90-00 SHAFT COMPL.,ND 5 N90-00 SHAFT RD BUSH, 0X 7 N90-0 SHAFT RD 8 N80-0 GEAR 9 N70-60 METAL 5X7X0 0 N80-60 GEAR 0B (CLAW N80-00 SPRING,SD.CLTCH.RETN N90-0 COLLAR E0-700 LINER 5.XX RING, 5X RING, RING, BEARING, BALL BEARING, BALL SEAL TC5 0 07, OIL SEAL, OIL TC5708

22 0CNP-M9000 Fig.7. BRAKE (A)=YSRA050EX N COVER W/DRUM,BRAKE N80-00 COVER COMP.,BRAKE A DRUM, BRAKE A SPRING, BRAKE SHOE 5 E SHOE,BRAKE 6 E PACKING,BRAKE COVER RING, SCREW, M6X6

23 0CNP-M9000 Fig.8. TRANSMISSION CASE (A)=YSRA050EX N80-0 HOUSING,TRANSMISSION A PIN, 8X STUD, M8X 0 N80-05 COVER,TRANSM.CASE 5 N90- CASE,RD SHAFT 6 N80-0 PACKING.CASE.5HAFT 7 E COVER 5,OILING GASKET, 8X PLUG, BOLT, M8X BOLT, M8X BOLT, M8X PLATED PLUG, 5

24 0CNP-M9000 Fig.9. AXLE CASE (A)=YSRA050EX LINER, SHAFT 0 N COVER COMP.,AXLE CS BUSH, 0X0 N70-5 CASE,AXLE 5 N80-50 CHAIN 0X5L 6 N70-50 SPROCKET 9 7 N AXLE COMPL. 8 N PIPE,CONNECTING 9 E LINER 7XX BEARING, BALL 60UU BEARING, BALL 605UU SEAL, OIL TC BOLT, M8X BOLT, M8X BOLT, M8X NUT, M8

25 0CNP-M9000 Fig.0. CHANGE (A)=YSRA050EX N BUSH,SIDE CLUTCH N80-60 FORK, CLUTCH N80-60 ROLLER,FORK N80-60 LVER.TIP.CHANGE.MAIN RING, O-RING, AP O-RING, AP NUT, M BOLT, M8X 0

26 0CNP-M9000 Fig.. HST (A)=YSRA050EX N0-05 SUB TANK N0-060 CAP, SUB-TANK N0-070 DIAPHRAGM,SUB-TANK N TRANSMISSION,HYDROST 5 N HOSE N BRACKET(HST 7 E NIPPLE ASSY, HOSE B 8 E NIPPLE, HOSE B O-RING WASHER, SPRING WASHER, SPRING WASHER, SPRING CLAMP, O-RING, AG BOLT, M8X BOLT, M8X0 PLATED NUT, M NUT, M0

27 0CNP-M9000 Fig.. HANDLE (A)=YSRA050EX N HANDLE N80-00 INSULATOR, RUBBER N80-0 COLLAR A WASHER, 0XX.5 5 A GRIP, HANDLE 6 E RUBBER, STOPPER BOLT, M0X 5

28 0CNP-M9000 Fig.. CONTROL PANEL (A)=YSRA050EX N80-07 COVER,PANEL REAR N PANEL,CONTROL N RUBBER,PANEL N90-07 RETAINER,RUBBER 5 N LATCH,LIFT 6 N BOLT 6X60(BLACK 7 N BOLT 6X60(BLACK BOLT, M8X BOLT, M8X NUT, M6

29 0CNP-M9000 Fig.. DRIVE CLUCH LEVER (A)=YSRA050EX N80-0 LEVER, CLUTCH N MTL.FLCRM CL.TRVL N80-08 SHAFT.FLCRM CL.TRVL N80- ROD 8X00 5 N90- ARM CMP,TRAVEL CLTCH 6 N80-0 ROD 8X0 7 N80-0 ROD 8X0L 8 N80-0 SPRING.CLUTCH.TRAVEL 9 N80-5 PLATE.FLCRM.CLTCHARM 0 N ADJUST NUT 8(LR-B) C68-50 PIN, SNAP 8 D BOLT, M6X E NUT, M8 L E SCREW, M8X.5L WASHER, WASHER, RING, E PIN, COTTER.0X BOLT, M8X BOLT, M8X NUT, M NUT, M8

30 0CNP-M9000 Fig.5. SNOW REMOVING CLUCH LEVER (A)=YSRA050EX N80-0 LEVER, CLUTCH N80-0 ROD 8X0 N80-0 ROD 8X0L N80- ARM.CLUTCH.SNOW RMVL 5 N80-50 MTL.FLCRM.CLTCH SNOW 6 N80-8 SHAFT.FLCRM.CLTCH SN 7 N80- ARM.CLTCH.SNOW RMVL 8 N80- LINK.CLTCH.SNOW RMVL 9 N80-50 ARM ASSY, LOCK 0 N80-7 SPRING N80-80 SPRING.LOCK-ARM N80-90 ROLLER.8X5X8 N80-80 GUIDE,SPRING N80-80 HOOK 5 N BOLT 6 N ADJUST NUT 8(LR-B) 7 C68-50 PIN, SNAP 8 8 C68-50 PIN, SNAP 8 9 C68-50 PIN, SNAP 8 0 D BOLT, M6X E NUT, M8 L E SCREW, M8X.5L E SHOE, SPRING WASHER, WASHER, WASHER, WASHER, WASHER, RING, E RING, E PIN, COTTER.0X BOLT, M8X NUT, M NUT, M NUT, M8

31 0CNP-M9000 Fig.6. SIDE CLUCH (A)=YSRA050EX N ARM (L), CLUTCH N ARM R,SIDE CLUTCH N BRACKET,SD.CLTCH.ARM N BRACKET.CLTCH.ARM.LW 5 N ROD,SIDE CLUTCH 6 N90-70 LEVER L,SIDE CLUTCH 7 N90-75 SIDE CLUTCH LEVER R 8 N SHAFT,FULCRUM 9 E RUBBER, STOPPER 0 E NUT, ADJUST 0 E NUT, M0 L E ROD, RETURN A E GRIP, LEVER E PIN F 5X5, SLOTTED WASHER, RING, PIN, SNAP BOLT, M6X BOLT, M8X NUT, M0

32 0CNP-M9000 Fig.7. MAIN CHANGE (A)=YSRA050EX E0-00 LINER, 5 N80-0 ROD 8X0 N ADJUST NUT 8(LR-B) N RETNR.SPRING BLLVLL 5 N80-06 RETAINER, SPRING 6 N80-08 SPRING LEVER 7 N80-0 LEVER.MAIN TRNSMS.UP 8 N90-0 LEVER,MAIN CHANGE 9 N90-70 PLATE,MAIN CHANGE 0 N80-0 ROD.MAIN TRNSMS.FRNT N80-0 ROD MAIN TRNSMS REAR N90-50 LINK,MAIN CHANGE BUSH, 5X5 N90-5 FULCRUM,MAIN CHANGE ELBOW 6 C68-50 PIN, SNAP 8 7 E NUT, M8 L 8 E GRIP, LEVER 9 E SPRING, 8X WASHER, RING, BOLT, M8X BOLT, M8X BOLT, M8X NUT, M NUT, M NUT, M NUT, M0

33 0CNP-M9000 Fig.8. BRAKE CONTROL (A)=YSRA050EX N80-0 ROD 8X0 N80-0 ROD 8X0L N ADJUST NUT 8(LR-B) N90-0 ARM,BRAKE LINK BUSH, 5X5 6 N80-70 ROD,BRAKE 7 N80-0 SPRING,BRAKE 8 N0-500 HOOK.SPRING.BRAKE 9 C68-50 PIN, SNAP 6 0 C68-50 PIN, SNAP 8 E NUT, M8 L WASHER, WASHER, WASHER, SPRING BOLT, M8X 90 PLATED NUT, M8

34 0CNP-M9000 Fig.9. SHOOTER LEVER (A)=YSRA050EX N RETNR.SPRING BLLVLL N80-06 RETAINER, SPRING N90-70 PLATE,MAIN CHANGE N90-0 LEVER COMP.,SHOOTER 5 N90-5 WASHER,SHOOTER LEVER 6 N90-9 SPRING,SHOOTER LEVER 7 N90-0 WIRE,SHOOT(DEFLECTOR 8 N90-50 RETURN SPRING,LEVER 9 E GRIP, LEVER 0 E SPRING, 8X WASHER, WASHER, PIN, SNAP PIN, SNAP BOLT, M8X NUT, M0

35 0CNP-M9000 Fig.0. SNOW REMOVING UNIT CONTROL (A)=YSRA050EX E GRIP, LEVER N90-50 PEDAL COMP.,FOOT N BUSH,FOOT PEDAL N SPRING 6X8 5 N ARM(L), LIFT 6 N ARM (R), LIFT 7 N90-57 CONNECTOR,ARM,LIFT, 8 N ARM,LIFT UPPER 9 N SPACER 0 N70-56 LEVER,LIFT N70-59 SPRING LFT.LVR.RETRN N ROD COMP.,LIFT N ROD A,LIFT N ROD B,LIFT 5 N ADJUSTER,ROD NUT, M 7 A WASHER, CLAMP BOLT WASHER, WASHER, RING, PIN, SNAP PIN, COTTER.0X PIN, H0X KEY, 5X NUT, M BOLT, M8X 5

36 0CNP-M9000 Fig.. SHASSIS (A)=YSRA050EX N90-60 CHASSIS COMPL. N80-67 RUBBER N STAY,SHASSIS BOLT, M8X BOLT, M8X BOLT, M0X 5

37 0CNP-M9000 Fig.. CRAWLER (A)=YSRA050EX 90-0 LINER, SHAFT 5 N FRAME L,TRACK N FRAME R,TRACK N70-88 MC900 5 N70-89 PIN 0X55,AXLE 6 N80-80 CRAWLER 80X60X 7 N IDLER 80 COMPL BUSH, 5X5 9 N FRAME,IDLER SHAFT 0 N90-80 SHAFT,IDLER N70-85 BOLT, TENSION N GUIDE COMP.,CRAWLER RING, RING, PIN, SNAP BEARING, BALL 605UU BOLT, M0X NUT, M NUT, M BOLT, M0X 5

38 0CNP-M9000 Fig.. HARNESS,BATTERY (A)=YSRA050EX D-700 SEAT, FUSE BOX B N RETAINER, BATTERY N BOLT,BATTERY CLAMP'G BATTERY, DRY 6BL 5 N WIRE HARNESS 6 N PULLER.FUSE 5 7 E FUSE, SLOW BLOW 0A 8 E CLAMP, BAND 9 E DIODE, 090 A FUSE, B 5A FUSE, B 0A FUSE, B 0A N CABLE A,BATTERY E CLIP, BAND 5 N CABLE B,BATTERY 6 E CLAMP, BAND 7 N SEAT,EARTH 8 E BAND WASHER, SPRING BOLT, M6X BOLT, M8X NUT, M6

39 0CNP-M9000 Fig.. SWITCHS (A)=YSRA050EX D SWITCH, PUSH N SPACER 5-6 N80-50 STARTING SW.ASSY N STARTER SWITCH COMP NUT, RING WASHER KEY ASSY 8 N90-50 SWITCH,PUSH

40 0CNP-M9000 Fig.5. LAMPS,STOP MOTOR (A)=YSRA050EX N80-5 HEAD LIGHT ASY. N70-5 LAMP V-5W G E LAMP,HEATER PILOT E LAMP.W 5 7E LAMP ASSY, PILOT G BULB (V/.W) WASHER, NUT, M8 9 N70-55 MOTOR,FUEL STOP 0 E PIN 6X WASHER, SPRING PIN, SNAP BOLT, M5X 6 PLATED

41 0CNP-M9000 Fig.6. RELAY (A)=YSRA050EX N BRACKET,RELAY N BRACKET,RELAY BOLT, M8X BOLT, M8X 6 5 N RELAY UNIT CONTROLLER RELAY ASSY, GLOW 8 E PLATE, RELAY 9 E RELAY, CA-A BOLT, M6X BOLT, M6X BOLT, M6X BOLT, M6X 5

42 0CNP-M9000 Fig.7. BONNET (A)=YSRA050EX N BOLT 6X60(BLACK C68-50 PIN, SNAP 6 7N N80-60 LATCH.BONNET 5 N80-6 HANDLE 6 N80-60 GASKET SP(BONNET) 7 N HINGE BONNET 8 N RUBBER,CONTACT 9 N FLCRM.BONNET CMP 0 N SPACER NA-05 N INSULATOR E GROMMET, WASHER, BOLT, M6X BOLT, M6X 6 6

43 0CNP-M9000 Fig.8. COVER,BONNET KEEL (A)=YSRA050EX SCREEN, L SCREEN, R E65-50 RUBBER, 7.5X6X.5 N80-6 COVER ASSY, SIDE 5 N PIPE.VINYL 8X0 6 6 N80-6 COVER ASSY, SIDE 7 N RUBBER 5.EDGE 8 N RUBBER.EDGE 9 7N NUT, SPEED M BOLT, M8X BOLT, M8X BOLT, M8X 6 E SPRING,LEG LOCK 5 N RIVET,.8X BOLT, M8X 0

44 0CNP-M9000 Fig.9. SNOW REMOVING FRAME (A)=YSRA050EX 7N FRAME,SNOW REMOVING N STOPPER N ROD,SNOW SHOVELING N COVER AUX.AUGER 5 N BEARING SB06 6 N CASING ASSY 7 N GUIDE ASSY WASHER, WASHER, BOLT, M8X NUT, M NUT, M NUT, M NUT, M BOLT M 6X PLATED BOLT M 6X 6 PLATED BOLT, M8X0

45 0CNP-M9000 Fig.0. AUGER SIDE BOARD,AUGER BOTTOM (A)=YSRA050EX N0-790 WASHER 8 N0-700 PLATE L,AUGER SIDE N0-70 COVER L,AUX.AUGER N0-750 PLATE R,AUGER SIDE 5 N0-760 COVER R,AUX.AUGER WASHER, WASHER, BOLT M 8X NUT, M NUT, M BOLT, M8X 6 PLATED BOLT, M8X0 8 N90-7 PLATE,BOTTOM WASHER, NUT, M SCREW, M8X0 6

46 0CNP-M9000 Fig.. SHOOTER (A)=YSRA050EX N80-70 PLATE.SWING N0-70 SEAT.TRN.SHTR CMP N80-70 FITTING.CHUTE N80-70 COLLER6.XX N80-70 SHIM 6.XX0. 6 N0-700 GUARD, SAFETY 7 7N SHOOTER WASHER, WASHER, COTTER PIN.0X NUT, M NUT, M6 6

47 0CNP-M9000 Fig.. DEFLECTOR (A)=YSRA050EX N80-75 DEFLECTOR COMPL. N80-70 SUB DEFLECTOR CMP N SHAFT.FLCRM.DEFLECTR N WASHER 7.5XX.0 5 N SPRIG.CHUTE PIN, COTTER.6X6

48 0CNP-M9000 Fig.. SHOOTER TURN (A)=YSRA050EX N0-580 BUSH 0X5,FLANGED N MOTOR TURNING SHOOTR N GEAR8T.TURNING N TINE PIN 5 N80-75 JOINT.MOTOR TRN 6 N SEAT MOTOR TURNING 7 N STAY.GEAR TRN CMP 8 N COVER, MOTOR 9 N SCREW 5XAEX.TAPPNG PIN, COTTER.6X BOLT M 6X BOLT M 8X BOLT M 8X 0

49 0CNP-M9000 Fig.. DEFLECTOR DRIVE (A)=YSRA050EX N ROD A COMPL WASHER, WASHER, PIN, COTTER.0X PIN, COTTER.0X5

50 0CNP-M9000 Fig.5. GEAR CASE (A)=YSRA050EX N CASE.GEAR.SNOWRMV N COVER,KEEP N BEARING AUGER N GASKET (A) 5 N PACKING B 6 N0-70 BOLT M,DRAIN WASHER, SEAL WASHER, SEAL RING, BOLT, M8X BOLT, M8X BOLT M 8X 6 PLATED N FITTING.CASE CMP BOLT, M8X BOLT, M8X 5

51 0CNP-M9000 Fig.6. BLOWER SHAFT & AUGER SHAFT (A)=YSRA050EX N80-70 SHAFT,BLOWER N70-70 WORM L N70-70 COLLAR,BLOWER SHAFT N COLLAR 5X0X9 5 N WASHER XX6 6 N BEARING,TAPER ROLLE 7 N PULLEY 8 N80-70 COLLAR KEY 7X KEY BEARING, BALL BEARING, BALL SEAL, OIL TC BOLT M0X BOLT, M8X 5 PLATED NUT, M8 7 N90-70 SHAFT,AUGER 8 N80-7 WHEEL, WORM KEY BEARING, BALL SEAL, OIL TC05008

52 0CNP-M9000 Fig.7. AUGER & BLOWER (A)=YSRA050EX J570-0 COLLAR A 0X.5 N FLANGE N BEARING.5 N BUSH 6.X5 5 N AUGER L 6 N AUGER R WASHER, WASHER, SPRING RING, KEY 7X BEARING, BALL 60UU BOLT M0X BOLT, M8X 6 PLATED BOLT, M8X 5 PLATED BOLT, M0X 5 PLATED NUT, M NUT, M0 8 N BLOWER COMPL KEY 7X BOLT, M0X 5 PLATED NUT, M0

53 0CNP-M9000 Fig.8. SNOW REMOVING MOUNTING (A)=YSRA050EX WASHER, WASHER, SPRING BOLT, M8X BOLT, M0X NUT, M8

54 0CNP-M9000 Fig.9. LABELS (A)=YSRA050EX N MARK,PROFESSIONAL E MARK "CE" N LABEL,PANEL,CONTROL N MARK L,BONNET 5 N MARK R,BONNET 6 N LABEL (YSRA050 7 N LABEL (YSRA050 8 N0-900 MARK,TRAVEL CLUTCH 9 N0-90 MARK,SNOW REM.CLUTCH 0 N0-900 MARK(KEY SWITCH) N0-90 LABEL,SOUND N LABEL,PEDAL,FOOT N LABEL,FUSE N MARK C "YANMAR" 5 N LABEL,BOLT REPLACE 6 N LABEL CAUTION

55 0CNP-M9000 Fig.50. LABELS(SAFETY (A)=YSRA050EX Q MARK,CAUTION N CAUTION,MUFFLER W CAUTION,BELT,COVWR W CAUTION,ENGINE,STOP 5 W CAUTION,ENGINE,STOP 6 N DANGER,SNW.REMV.UNIT 7 N WARNING,SHOOTER 8 N WARNING,SCATTERINGS

56 0CNP-M9000 Fig.5. TOOLS & ACCESSORIES (A)=YSRA050EX A SCREWDRIVER,COMBINAT E BAG, TOOL SPANNER, X SPANNER, 7X WRENCH, 0X 6 N70-89 PIN 0X55,AXLE 7 N MANUAL 8 N SAFETY BT8X5(WTH NT 9 7E-9990 JUG ASSY, OIL PIN, SNAP PIPE, X 00 Remarks () IT IS A SPARE PART FOR SAFETY BOLT,GROUP NO.7, REF. NO..

57 Parts No. Index Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No A A A A A A A C C C

58 Parts No. Index Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. D-700 E N80-0 N D N E N E N N D J N N E0-50 N N N80-5 E N N N E N N80-00 N E N N80-00 N E N N N E N N N E N N N E N N N E N N N E N N N E N N N E N N N N N N E N N N N N E N N N E N N N E N N N E N N N N N70-88 N N N N E N E N N N E N N E N70-85 N N E N N N E N N N E N N N E N N N E N N80-00 N E N N80-0 N80-67 E N N80-07 N E N N N E N N E N N E N0-05 N80-0 N E N N E N0-070 N N E N0-580 N80-08 N80-50 E N N80- N E N N N N N E N N N N

59 Parts No. Index Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. N N N N N N N N N N N N N N90- N N N90-5 N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N80-70 N N N80-70 N90-07 N0-70 N80-70 N N N N90-5 N N80-75 N N N80-70 N Q N N W N N W N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N

60 Parts No. Index Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No

61 Parts No. Index Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No E E N N N N X X X X X X X X X X X X X X X X X X X X X Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No.

PARTS CATALOG 0CNP3-G90400

PARTS CATALOG 0CNP3-G90400 PARTS CATALOG Published 0/ (Mar.) 0CNP-G9000 Directions for the Parts Catalog..The parts stipulated in this Parts Catalog are not necessarily standard equipped parts..parts may change without prior notice..the