PARTS CATALOG 0CR10-G57400

Size: px

Start display at page:

Download "PARTS CATALOG 0CR10-G57400"

David Waters
5 years ago
Views:

1 PARTS CATALOG Published 0/ (Mar.) 0CR0-G57400

3 Directions for the Parts Catalog..The parts stipulated in this Parts Catalog are not necessarily standard equipped parts..parts may change without prior notice..the following is an example of the Parts Catalog format. 0CF0-G60 9. FUEL INJECTION PUMP(W/BOOST) (A)=4JH-DT (B)=4JH-DTZ (C)=4JH-DTZP 4JH-DTZA 4JH-DTZY (C) (D) (E) (A) (B) FUEL INJECTION PUMP FUEL INJECTION PUMP N (A=E0085) (B=E0000) SCREW M 6X SCREW M 6X K (A=E0056) (B=E0056) (C=E0056) (D=E0056) (E=E0056) CAMSHAFT BEARING, ROLLER RETAINER 5 () BOOST COMPEMSATOR TYPE. OPTIONAL PART, TO E0055,(4JH-DT, 4JH-DTZ 4 5 Ref. No. The Ref. No. listed may not be in accordance with the illustration Ref. No. (Ex.) Illustration No. List Ref No. (Before change) - (After change) For interchangeable symbols N, R and K, illustrations for new parts may be abbreviated. Lev. (Level) Level indication The numbers below indicate the level of relativity towards the main part Main parts (Assembly parts) Sub component included in Sub component included in. Note) Parts that are not for sale are partially illustrated but not listed. Interchangeability Mark When a part change takes place, one of the following interchangeability symbols is indicated beside the part. Symbol N Q R S W Z F K Interchangeability Old Yes No New No Old Yes New Old Yes Yes New Old No No New Contents note New Part is interchangeable for Old Part but Old Part is not interchangeable for New Part. New Part is not interchangeable for Old Part but Old Part is interchangeable for New Part. New/ Old Parts are both interchangeable. New/ Old Parts are both not interchangeable. Part discontinued. Part newly added. Not interchangeable by a single part but interchangeable together with related parts. Changes only for used parts quantities. Effective Machine No. When a part changes, the effective Machine No. will be indicated in the (A)- column. Product Symbol Product No. Product Symbol Product No. C Clutch No. Compressor No. F Machine No. (Agricultural Equip.) D Drive No. M Machine No. E Engine No. Note ) Date Note ) A date may follow the symbol. (Ex.) Note ) XXX are for parts that could not be predicted or for engine models that could not be identified. Note ) (A=E0085) is the E (Engine Serial Number) for the column (A) model (in this case 4JH-DT) after the parts design change. Mark Figures or alphabets (symbols) are entered in the remarks column. The comments (remarks) on parts that are indicated at the bottom of the illustration are the same symbols as those stated above.

4 MODEL : TNV76-NBK,GGE,HGE CONTENTS PC NO : 0CR0-G57400 Fig.No. GROUP NAME ENGINE SECTION TNV76-NBK,GGE,HGE. CYLINDER BOLCK. GEAR HOUSING. FLYWHEEL HOUSING & OIL SUMP 4. CYLINDER HEAD & BONNET 5. AIR CREANER 6. EXHAUST MANIFOLD & SILENCER 7. CAMSHAFT & DRIVING GEAR 8. CRANKSHAFT & PISTON 9. LUB.OIL SYSTEM 0. COOLING WATER SYSTEM. FUEL INJECTION PUMP. GOVERNOR. FUEL INJECTION PUMP 4. GOVERNOR 5. FUEL INJECTION VALVE 6. FUEL LINE 7. STARTING MOTOR 8. GENERATOR 9. GASKET SET 0. SHORT BLOCK Fig.No. GROUP NAME

5 0CR0-G57400 Fig.. CYLINDER BOLCK 0CR0-G CYLINDER BOLCK (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE REF. LEV. PARTS NO. DESCRIPTION I R BLOCK ASSY, CYLINDER PLUG PT/ PLUG 0 (SUS) PLUG PLUG PT/ PLUG BOLT BUSH, CAMSHAFT PLUG MAIN BEARING SET BEARING, THRUST BOLT, CYL. HEAD GASKET, CYL.HEAD BEARING,THRUST.5OS MAIN METAL US= () OVER-SIZE(O.S=0.5)PART. () REPAIR PART. () UNDER-SIZE(U.S=0.5)PART.

6 0CR0-G57400 Fig.. GEAR HOUSING 0CR0-G GEAR HOUSING (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE CASE, GEAR BOLT, STUD M COVER ASSY,GEAR CASE COVER ASSY,GEAR CASE COVER ASSY,GEAR CASE COVER ASSY,GEAR CASE COVER, GEAR CASE COVER, GEAR CASE SEAL, OIL PLUG PT/8,SCREW COVER ASSY, PUMP COVER, LUB.OIL PUMP VALVE, RELIEF SPRING PLUG ROTOR, INNER ROTOR, OUTER SCREW, M6X COVER, PUMP TIMING PIPE, KNOCK O-RING P O-RING, P O-RING, F.I.PUMP BOLT M 6X PLATED BOLT M 6X 6 PLATED BOLT M 6X 40 PLATED BOLT M 6X 40 PLATED BOLT M 6X 60 PLATED BOLT M 6X 65 PLATED NUT GASKET, LIQUID COVER,FILLER O-RING A P COVER, BLIND O-RING A S BOLT M 6X 6 PLATED () OPTIONAL PART.

7 0CR0-G57400 Fig.. FLYWHEEL HOUSING & OIL SUMP 0CR0-G FLYWHEEL HOUSING & OIL SUMP (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE PARALLEL PIN 8X HOUSING, FLYWHEEL HOUSING, FLYWHEEL BOLT M 0X CAP, FLYWHEEL COVER SEAL, OIL BOLT M0X SPACER, OIL SUMP SUMP ASSY, LUB.OIL PLUG M SEAL WASHER 6S BOLT M 8X PLATED BOLT M 8X 0 PLATED BOLT M 8X 45 PLATED BOLT M 8X 50 PLATED GASKET, LIQUID SUMP ASSY, LUB.OIL PLUG M SEAL WASHER 6S SUMP ASSY, LUB.OIL PLUG M SEAL WASHER 6S () OPTIONAL PART.

8 0CR0-G57400 Fig.4. CYLINDER HEAD & BONNET () REPAIR PART. () OPTIONAL PART. 0CR0-G CYLINDER HEAD & BONNET (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE LIFTER, ENGINE BOLT M 8X 6 PLATED PROTECTER, NOZZLE GASKET, NOZZLE CAP, VALVE HEAD ASSY, CYLINDER HEAD ASSY, CYLINDER GUIDE, VALVE PLUG PLUG PT /6,SCREW VALVE, INTAKE VALVE, EXHAUST 977- SPRING, VALVE RETAINER, SPRING COTTER, VALVE SEAL, VALVE STEM SEAL, VALVE STEM SPRING PIN 6X SUPPORT ASSY, ARM SHAFT ASSY, ROCKER SUPPORT, ROCKER ARM SPRING ARM ASSY, ROCKER SCREW, VALVE NUT M8XP CIRCLIP SCREW M 5X BOLT M 8X 40 PLATED COVER,FILLER BONNET ASSY, HEAD PLATE, BAFFLE BAFFLE, BREATHER BAFFLE, BREATHER DIAPHRAGM ASSY PLATE, DIAPHRAGM COVER, DIAPHRAGM DIAPHRAGM SPRING, DIAPHRAGM GASKET, BONNET COVER, BONNET GASKET,BONNET COVER SCREW 5X0,TAPPING SCREW 5X0,TAPPING SCREW 5X O-RING A P BOLT M 6X 0 PLATED BOLT M 6X 75 PLATED PLUG, GLOW CONNECTOR, GLOW PLUG GASKET, LIQUID LIFTER, ENGINE ++ CONTINUE ++

9 0CR0-G57400 Fig.4. CYLINDER HEAD & BONNET 0CR0-G CYLINDER HEAD & BONNET (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE BOLT 8X 4 PLATED () REPAIR PART. () OPTIONAL PART.

10 0CR0-G CR0-G AIR CREANER Fig.5. AIR CREANER (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE HOSE, AIR INTAKE CLEANER ASSY, AIR VALVE, UNLOADER BODY ASSY ELEMENT COVER, AIR CREANER RING SUPPORT, AIR CLEANER STAY CLAMP BOLT M 6X 4 PLATED

11 0CR0-G CR0-G EXHAUST MANIFOLD & SILENCER Fig.6. EXHAUST MANIFOLD & SILENCER (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE MANIFOLD, EXHAUST MANIFOLD, EXHAUST GASKET, MANIFOLD GASKET, SILENCER STUD, M8X BOLT M 8X 50 PLATED BOLT M 8X NUT BOLT M 8X 70 PLATED SILENCER BOLT M0X 8 PLATED NUT GASKET, SILENCER

12 0CR0-G CR0-G CAMSHAFT & DRIVING GEAR Fig.7. CAMSHAFT & DRIVING GEAR (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE REF. LEV. PARTS NO. DESCRIPTION I R TAPPET ROD, PUSH CAMSHFT ASSY BOLT M 6X PLATED SHAFT, IDLE GEAR GEAR ASSY, IDLE BOLT M 6X 5 PLATED BOLT,FI-P GEAR, PUMP FLANGE SPRING WASHER NUT

13 0CR0-G57400 Fig.8. CRANKSHAFT & PISTON 0CR0-G CRANKSHAFT & PISTON (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE CRANKSHAFT ASSY PARALLEL PIN 8X KEY 4X GEAR, CRANKSHAFT FLYWHEEL ASSY GEAR, RING V-PULLEY, CRANKSHAFT BOLT MX.5,FLANGE WASHER PISTON W/RING RING SET PIN, PISTON CIRCLIP ROD ASSY, CONNECTING BUSH, PISTON PIN BOLT, CONNECTING ROD PISTON W/RING RING SET, 0.5 OS BEARING,PIN US= BOLT, FLYWHEEL FLYWHEEL ASSY GEAR, RING METAL ASSY,CRANK PIN () OVER-SIZE(O.S=0.5)PART. () REPAIR PART. () UNDER-SIZE(U.S=0.5)PART.

14 0CR0-G57400 Fig.9. LUB.OIL SYSTEM 0CR0-G LUB.OIL SYSTEM (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE REF. LEV. PARTS NO. DESCRIPTION I R DIPSTICK, LUB.OIL STUD FILTER ASSY, LUB.OIL O-RING, P PIPE ASSY, LUB,OIL BOLT 6X 0 PLATED SWITCH,(0.5KG)L.O PIPE ASSY, HYDRAULIC BOLT ASSY, JOINT SEAL WASHER 8S JOINT BOLT SEAL WASHER 8S GUIDE, DIPSTICK DIPSTICK PIPE ASSY, LUB,OIL () REPAIR PART.

15 0CR0-G CR0-G COOLING WATER SYSTEM Fig.0. COOLING WATER SYSTEM (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE REF. LEV. PARTS NO. DESCRIPTION I R PUMP ASSY, C.W COVER GASKET SCREW M 6X PLUG O-RING PLUG, DRAIN R GASKET, WATER PUMP GASKET 8, ROUND BOLT M 8X PLATED BOLT M 8X 50 PLATED V-PULLEY, C.W.PUMP V-BELT FAN,COOLING D5X SPACER BOLT M 6X 0 PLATED COVER, THERMOSTAT THERMOSTAT, 7C BOLT M 8X 0 PLATED PLUG M GASKET PLUG, DRAIN V-PULLEY, C.W.PUMP FAN, COOLING SWITCH, THERMO(0 C

16 0CR0-G57400 Fig.. FUEL INJECTION PUMP () GOVERNOR ASSY(FIG.) IS INCORPORATED IN THIS FOP.CMP (REF.NO.). 0CR0-G FUEL INJECTION PUMP (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE FIE ASSY,TNV76-N5BA STUD, FEED PUMP CAMSHAFT SUPPORT, BEARING PARALLEL PIN KEY PLUNGER ASSY PIN, BARREL LOCKING SEAT SPRING RETAINER, SPRING SPRING, PLUNGER TAPPET ASSY SHIM PACK STOPPER O-RING S O-RING S VALVE ASSY, DELIVERY SPRING, DELIVERY GASKET, DELIVERY VALVE ASSY, DELIVERY LOCKING O-RING DEFLECTOR PLUG PLUG SHIM SET, ADJUSTING RACK, CONTROL BUSH, RACK SPACER, AUX. SPRING CIRCLIP PINION, CONTROL PINION SCREW PLUG O-RING SPRING, RACK COVER PACKING COVER, BODY SIDE GASKET GUIDE, RACK LABEL, CAUTION SEAL WASHER 6S SPRING WASHER SPRING PIN 5X BALL BEARING BALL BEARING O-RING 4D P SCREW M 5X SCREW M 6X BOLT M 5X 0 PLATED ++ CONTINUE ++

17 0CR0-G57400 Fig.. FUEL INJECTION PUMP 0CR0-G FUEL INJECTION PUMP (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE NUT COLLAR. FIC FIX BOLT, FIXATION GASKET COVER () GOVERNOR ASSY(FIG.) IS INCORPORATED IN THIS FOP.CMP (REF.NO.).

18 0CR0-G57400 Fig.. GOVERNOR () SELECTIVE PARTS: CERTAIN THE CLASSIFICATION MARK, THEN PLACE YOUR ORDER.(REF. TO ILLUSTRATION) * THIS FIGURE(GOVERNOR ASSY)IS INCORPORATED IN THE FUEL INJECTION PUMP ASSY(FIG.). 0CR0-G GOVERNOR (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE GASKET, CASE CASE, GOVERNOR GASKET, COVER CASE ASSY, GOVERNOR O-RING S LINK, L=9. : LINK, L=9.8 : LINK, L=8.8 : LINK, L=0. : NUT M SHAFT, GOV. LEVER SHAFT ASSY, CONTROL LEVER, CONTROL BOLT, REVOL. LIMIT SHIM T= SPACER ASSY LEVER ASSY, GOVERNOR SHIM SET SPRING, SET SPRING, FUEL CONTROL SHIM ASSY SHIM T= RETAINER, SHAFT CIRCLIP E O-RING A S BOLT 6X 0 PLATED NUT M WEIGHT ASSY NUT, GOVERNOR WEIGHT SLEEVE(L=5.5) BOLT, IDLE LIMIT SEAL WASHER 0S SEAL WASHER SNAP PIN PLUG O-RING A S O-RING N (A=EXXXXX) BOLT 6X 0 PLATED BOLT M 6X 4 PLATED BOLT M 6X 0 PLATED BOLT M 6X 45 PLATED NUT M LOCK NUT LIMITER ASSY, FUEL ANGLEICH ASSY SPRING, GOVERNOR CAP NUT PLATE SOLENOID, STOP GASKET

19 0CR0-G57400 Fig.. FUEL INJECTION PUMP () GOVERNOR ASSY(FIG.4) IS INCORPORATED IN THIS FOP.CMP (REF.NO.,). 0CR0-G FUEL INJECTION PUMP (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE FIE ASSY(TNV76-XJLT FIE ASSY(TNV76-XJLT STUD, FEED PUMP CAMSHAFT SUPPORT, BEARING PARALLEL PIN KEY PLUNGER ASSY PIN, BARREL LOCKING BOLT M 5X 0 PLATED SEAT SPRING RETAINER, SPRING SPRING, PLUNGER TAPPET ASSY SHIM PACK STOPPER O-RING S O-RING S VALVE ASSY, DELIVERY SPRING, DELIVERY GASKET, DELIVERY VALVE ASSY, DELIVERY LOCKING O-RING DEFLECTOR PLUG PLUG SHIM SET, ADJUSTING RACK, CONTROL BUSH, RACK SPACER, AUX. SPRING CIRCLIP PINION, CONTROL PINION SCREW PLUG O-RING SPRING, RACK COVER PACKING COVER, BODY SIDE GASKET GUIDE, RACK LABEL, CAUTION SEAL WASHER 6S SPRING WASHER NUT SPRING PIN 5X BALL BEARING BALL BEARING O-RING 4D P5 ++ CONTINUE ++

20 0CR0-G57400 Fig.. FUEL INJECTION PUMP 0CR0-G FUEL INJECTION PUMP (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE SCREW M 5X SCREW M 6X COLLAR. FIC FIX BOLT, FIXATION FEED PUMP ASSY GASKET PUMP ASSY, FUEL FEED () GOVERNOR ASSY(FIG.4) IS INCORPORATED IN THIS FOP.CMP (REF.NO.,).

21 0CR0-G57400 Fig.4. GOVERNOR () SELECTIVE PARTS: CERTAIN THE CLASSIFICATION MARK, THEN PLACE YOUR ORDER.(REF. TO ILLUSTRATION) * THIS FIGURE(GOVERNOR ASSY)IS INCORPORATED IN THE FUEL INJECTION PUMP ASSY(FIG.). 0CR0-G GOVERNOR (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE GASKET, CASE CASE, GOVERNOR CASE, GOVERNOR GASKET, COVER SCREW SPRING, IDLE SUB CASE ASSY, GOVERNOR CASE ASSY, GOVERNOR O-RING S LINK, L=9. : LINK, L=9.8 : LINK, L=8.8 : LINK, L=0. : NUT M SHAFT, GOV. LEVER SHAFT ASSY, CONTROL LEVER, CONTROL BOLT, REVOL. LIMIT SHIM T= SPACER ASSY LEVER ASSY, GOVERNOR LEVER ASSY, GOVERNOR SHIM SET SPRING, SET SPRING SPRING, FUEL CONTROL SHIM ASSY SHIM T= RETAINER, SHAFT CIRCLIP E O-RING A S BOLT 6X 0 PLATED NUT M LOCK NUT WEIGHT ASSY NUT, GOVERNOR WEIGHT SLEEVE(L=5.5) BOLT, IDLE LIMIT SEAL WASHER SNAP PIN O-RING A S BOLT 6X 0 PLATED BOLT M 6X 4 PLATED BOLT M 6X 0 PLATED BOLT M 6X 45 PLATED NUT M LOCK NUT NUT, CAP SEAL WASER SEAL WASHER 0S PLUG 0 ++ CONTINUE ++

22 0CR0-G57400 Fig.4. GOVERNOR 0CR0-G GOVERNOR (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE ANGLEICH ASSY ANGLEICH ASSY SPRING, GOVERNOR SPRING, GOVERNOR CAP NUT PLATE SOLENOID, STOP GASKET BOLT, FUEL CONTROL LOCK NUT LIMITER ASSY, FUEL () SELECTIVE PARTS: CERTAIN THE CLASSIFICATION MARK, THEN PLACE YOUR ORDER.(REF. TO ILLUSTRATION) * THIS FIGURE(GOVERNOR ASSY)IS INCORPORATED IN THE FUEL INJECTION PUMP ASSY(FIG.).

23 0CR0-G CR0-G FUEL INJECTION VALVE Fig.5. FUEL INJECTION VALVE (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE VALVE ASSY,INJECTION HOLDER, NOZZLE NOZZLE ASSY VALVE ASSY,INJECTION HOLDER, NOZZLE NOZZLE ASSY RETAINER, INJ. PIPE BOLT M4X4,HEX.SCKT PIPE, FUEL INJECTION PIPE, FUEL INJECTION PIPE, FUEL INJECTION PIPE, FUEL INJECTION PIPE, FUEL INJECTION PIPE, FUEL INJECTION JOINT, OVER FLOW JOINT PIPE ASSY, RETURN GASKET, RETURN PIPE, FUEL RETURN CLAMP NUT VALVE ASSY, CHECK SEAL WASHER PIPE ASSY, FUEL OIL CLAMP PIPE, FUEL PIPE ASSY, FUEL OIL CLAMP PIPE, FUEL OIL

24 0CR0-G CR0-G FUEL LINE Fig.6. FUEL LINE (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE STRAINER ASSY CUP, STRAINER O-RING RING, RETAINING SPRING ELEMENT LEVER SPRING, TAPER VALVE O-RING A P-0A SCREW M BRACKET, FILTER BOLT W/WASHER M8X BOLT 8X 4 PLATED BOLT, PIPE JOINT JOINT, PIPE PIPE ASSY, FUEL OIL CLAMP SEAL WASHER PUMP ASSY, FUEL FEED SEPARATOR, WATER O-RING A P-0A VALVE, TAPER SPRING, TAPER VALVE HANDLE, COCK BOWL, FUEL STRAINER O-RING RING, RETAINING SPRING, SCREEN FLOAT PLUG SCREW M SCREEN GASKET 6, NYLON STRAINER ASSY, FUEL SPRING, TAPER VALVE LEVER CUP, STRAINER O-RING RING, RETAINING SPRING ELEMENT SCREW M O-RING A P-0A BRACKET, FO FILTER PIPE ASSY, FUEL OIL CLAMP PIPE ASSY, FUEL OIL CLAMP

25 0CR0-G CR0-G STARTING MOTOR Fig.7. STARTING MOTOR (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE REF. LEV. PARTS NO. DESCRIPTION I R BOLT M0X 5 PLATED STARTER, P. X COIL ASSY, FIELD 4 X STARTER KIT 5 X HOLDER ASSY. 6 X SPRING X ARMATURE ASSY 8 X CLUTCH SUB-ASSY. 9 X HOUSING ASSY,STARTER 0 X NEEDLE BEARING X FRAME ASSY. X BEARING X COVER 4 X BEARING SUB-ASSY. 5 X BEARING 6 X SHAFT SUB-ASSY. 7 X BEARING 8 X GEAR 9 X GEAR 0 X LEVER X SWITCH,EMERGENCY X RING X RING 4 X0800 NUT 5 X WASHER 6 X WASHER 7 X WASHER 8 X PLATE 9 X NUT 0 X NUT X BOLT, THROUGH X SCREW M 4X 6 (BS) 4 X COVER SET, TERMINAL 5 X89500 NUT

26 0CR0-G CR0-G GENERATOR Fig.8. GENERATOR (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE REF. LEV. PARTS NO. DESCRIPTION I R ADJUSTER, BELT GENERATOR X NUT ROTOR ASSY BALL BEARING COVER, BEARING THRUST WASHER FLAME ASSY, DRIVE BALL BEARING PLATE SCREW BOLT, STUD FLAME ASSY, REAR COVER PULLEY NUT REGULATOR ASSY HOLDER HOLDER, BRUSH BRUSH ASSY SPRING SCREW SCREW BOLT SCREW W/WASHER BOLT INSULATION BUSH NUT COLLAR BOLT M 8X 0 PLATED ADJUSTER, BELT BOLT, ADJUSTER BOLT M0X 45 PLATED DIODE RELAY, SAFETY RELAY, GROW TIMER (SEC TIMER

27 0CR0-G57400 Fig.9. GASKET SET 0CR0-G GASKET SET (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE GASKET SET(NON-ASB.) GASKET SET(NON-ASB.) GASKET, CYL.HEAD O-RING, F.I.PUMP SEAL, VALVE STEM PROTECTER, NOZZLE GASKET, BONNET GASKET, MANIFOLD GASKET, SILENCER SEAL, VALVE STEM SEAL WASHER 8S O-RING A P O-RING, P O-RING P O-RING, P GASKET, NOZZLE GASKET,BONNET COVER GASKET SEAL WASHER GASKET, RETURN GASKET, WATER PUMP GASKET 8, ROUND SEAL WASHER 6S O-RING A S FLEX HORN GASKET, LIQUID () OPTIONAL PART.

28 0CR0-G57400 Fig.0. SHORT BLOCK 0CR0-G SHORT BLOCK (A)=TNV76-NBK (B)=TNV76-GGE (C)=TNV76-HGE REF. LEV. PARTS NO. DESCRIPTION I R SHORT BLOCK ASSY BLOCK ASSY, CYLINDER TAPPET CAMSHAFT ASSY CRANKSHAFT ASSY PISTON ASSY PIN, PISTON ROD ASSY, CONNECTING BEARING ASSY, CRANK GEAR ASSY, IDLE RING, BOLT, 6 X * NOT ILLUSTRATED.

29 Part Number Index All parts are stipulated in the order of part numbers. (Depending on the area in which the part is used.) This index will display the location of the part according to each part number.

30 MODEL : TNV76-NBK,GGE,HGE PARTS No. INDEX PC NO : 0CR0-G57400 PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No

31 MODEL : TNV76-NBK,GGE,HGE PARTS No. INDEX PC NO : 0CR0-G57400 PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No

32 MODEL : TNV76-NBK,GGE,HGE PARTS No. INDEX PC NO : 0CR0-G57400 PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X PARTS No. Fig. Ref.No. - -

PARTS CATALOG 0CR10-G57500

PARTS CATALOG 0CR10-G57500 PARTS CATALOG Published 00/6 (Jun.) 0CR0-G57500 Directions for the Parts Catalog..The parts stipulated in this Parts Catalog are not necessarily standard equipped parts..parts may change without prior