PARTS CATALOG 0CV10-M77400EN

Transcription

1 PARTS CATALOG 0CV0-M77400EN Last update Jan., 20

2

3 Directions for the Parts Catalog..The parts stipulated in this Parts Catalog are not necessarily standard equipped parts. 2.Parts may change without prior notice. 3.The following is an example of the Parts Catalog format. 0CF0-G FUEL INJECTION PUMP(/BOOST) (A)=4JH-DT (B)=4JH-DTZ (C)=4JH-DTZP 4JH-DTZA 4JH-DTZY Q'TY (C) (D) (E) REF. LEV. PARTS NO. DESCRIPTION (A) (B) (F) FUEL INJECTION PUMP FUEL INJECTION PUMP N (A=E0085) (B=E00200) SCRE M 6X SCRE M 6X K (A=E0056) (B=E0056) (C=E0056) (D=E0056) (E=E0056) CAMSHAFT BEARING, ROLLER RETAINER 3 5 Remarks () BOOST COMPEMSATOR TYPE. OPTIONAL PART, TO E0055,(4JH-DT, 4JH-DTZ Ref. No. The Ref. No. listed may not be in accordance with the illustration Ref. No. (Ex.) Illustration No. List Ref No. (Before change) - (After change) For interchangeable symbols N, R and K, illustrations for new parts may be abbreviated. Lev. (Level) Level indication The numbers below indicate the level of relativity towards the main part Main parts (Assembly parts) Sub component included in Sub component included in 2. Note) Parts that are not for sale are partially illustrated but not listed. Interchangeability Mark hen a part change takes place, one of the following interchangeability symbols is indicated beside the part. Symbol N Q R S Z F K Interchangeability Old Yes No New No Old Yes New Old Yes Yes New Old No No New Contents note New Part is interchangeable for Old Part but Old Part is not interchangeable for New Part. New Part is not interchangeable for Old Part but Old Part is interchangeable for New Part. New/ Old Parts are both interchangeable. New/ Old Parts are both not interchangeable. Part newly added. Part discontinued. Not interchangeable by a single part but interchangeable together with related parts. Changes only for used parts quantities. Effective Machine No. hen a part changes, the effective Machine No. will be indicated in the (A)-(F) column. Product Symbol Product No. Product Symbol Product No. C Clutch No. Compressor No. F Machine No. (Agricultural Equip.) D Drive No. M Machine No. E Engine No. Note ) A date may follow the symbol. (Ex.) Note 2) XXXXX and ZZZZZ are for parts that could not be predicted or for engine models that could not be identified. Note 3) (A=E0085) is the E (Engine Serial Number) for the column (A) model (in this case 4JH-DT) after the parts design change. Remarks Mark Figures or alphabets (symbols) are entered in the remarks column. The comments (remarks) on parts that are indicated at the bottom of the illustration are the same symbols as those stated above.

4 Contents Fig. No. Fig. Name Fig. No. Fig. Name L48EE-DK(3,PA,PA). CYLINDER BLOCK 2. CYLINDER HEAD & BONNET 3. AIR CLEANER & MUFFLER 4. CRANKSHAFT,PISTON & CAMSHAFT 5. LUB.OIL PUMP & GOVERNOR 6. COOLING & STARTING DEVICE 7. FUEL INJECTION PUMP 8. FUEL TANK & FUEL LINE 9. TOOL,LABEL & GASKET SET

5 0CV0-M77400 Fig.. CYLINDER BLOCK (A)=L48EE-DK3 (B)=L48EE-DKPA (C)=L48EE-DKPA BLOCK ASSY, CYLINDER BLOCK ASSY, CYLINDER S COVER BOLT, M0X 2 PLATED BOLT, M8X 35 PLATED PIN, PARALLEL M4X BOLT, HEAD BOLT, HEAD NUT, CYLINDER HEAD NUT, CAP ASHER GASKET SET, HEAD O-RING SHIM SET COVER GASKET PIN, M8X STUD, M6X STUD, M6X NUT, M GASKET, CRANK CASE COVER, CRANK CASE COVER, CRANK CASE BEARING, MAIN PLUG, CAP ASSY O-RING, ASHER, SEAL RETAINER, BEARING BEARING, HR6306G3C SEAL, OIL SEAL, 25X4.2X BEARING, BOLT, M8X 2 PLATED PLUG, R PIPE, OIL INLET BOLT, M6X 25 PLATED BEARING, 0.25 US BEARING, 0.50 US 2 3 Remarks () REPAIR PART. (2) UNDER-SIZE(U.S=0.25)PART. (3) UNDER-SIZE(U.S=0.50)PART. (4) A= REF.NO. M0 X.25, REF.NO,- M4 X.25.

6 0CV0-M77400 Fig.2. CYLINDER HEAD & BONNET (A)=L48EE-DK3 (B)=L48EE-DKPA (C)=L48EE-DKPA HEAD ASSY, CYLINDER VALVE, INTAKE VALVE, EXHAUST SPRING, VALVE RETAINER, SPRING COTTER ASSY SUPPORT ASSY, ARM SUPPORT, ROCKER ARM ARM, ROCKER SCRE, VALVE ADJUST NUT, M ARM, ROCKER SCRE, VALVE ADJUST NUT, M RING, SEAL, VALVE STEM GASKET, NOZZLE SPACER, NOZZLE ASHER CAP, VALVE RETAINER, NOZZLE PIN, SPRING 4.0X BOLT, M6X 45 PLATED STUD, M6X NUT, M GASKET, BONNET BONNET ASSY, HEAD BONNET ASSY, HEAD LEVER ASSY SPRING,DECOMPRESSION PIN BOLT, M6X 55 PLATED 3 3 3

7 0CV0-M77400 Fig.3. AIR CLEANER & MUFFLER (A)=L48EE-DK3 (B)=L48EE-DKPA (C)=L48EE-DKPA GASKET, AIR CLEANER CLEANER ASSY, AIR COVER, AIR CREANER CASE ASSY, CLEANER ASHER, SEAL M ELEMENT NUT, ING M NUT PIPE, AIR INTAKE GASKET BOLT, M6X 25 PLATED STUD, M6X STUD, M6X MUFFLER ASSY COVER, SILENCER BOLT, M6X 8 PLATED GASKET, MUFFLER BOLT, M6X 2 PLATED STUD, M8X NUT, M EXTENSION ASSY SCRE, M6X NUT, M PIPE, AIR INTAKE O-RING

8 0CV0-M77400 Fig.4. CRANKSHAFT,PISTON & CAMSHAFT (A)=L48EE-DK3 (B)=L48EE-DKPA (C)=L48EE-DKPA CAMSHAFT ASSY SPRING,DECOMPRESSION CAMSHAFT ASSY CAMSHAFT ASSY, D R (B=EZZZZZ) TAPPET TAPPET ROD ASSY, PUSH ROD ASSY, PUSH CRANKSHAFT ASSY CRANKSHAFT ASSY NUT, CYLINDER HEAD ASHER KEY, 4.7X FLYHEEL FLYHEEL ASHER KEY, 4X PISTON ASSY, D RING SET, PISTON PIN, PISTON D= RING, ROD ASSY, CONNECTING BOLT, CONNECTING ROD BEARING, PISTON PIN BEARING, CRANK PIN SHAFT ASSY, BALANCER BEARING, BALL BOLT, 5/5-24UNF BEARING ASSY, BEARING, 0.50 US Remarks () UNDER-SIZED PARTS.

9 0CV0-M77400 Fig.5. LUB.OIL PUMP & GOVERNOR (A)=L48EE-DK3 (B)=L48EE-DKPA (C)=L48EE-DKPA PUMP ASSY, OIL COVER COVER O-RING PIN, PARALLEL M3X SCRE, TAPPING M6X FILTER ASSY, OIL O-RING, AS BOLT, M6X 6 PLATED LEVER ASSY, GOVERNOR PIN, TAPER 3X PIN, TAPER 3X GOVERNOR ASSY ASHER HANDLE, REGULATOR BOLT, ADJUSTING KNOB BOLT, M6X 4 PLATED BOLT M 4X 8 PLATED SPRING, REGULATOR SPRING, RETURN LIMITER ASSY, FUEL LIMITER ASSY, FUEL S 43A ASHER, 4 43B PLATE 43C NUT, M4 43D LIMITER ASSY, FUEL 43E NUT, M BRACKET BOLT, ADJUSTING NUT, LOCK M NUT, LOCK M0 N (A=E02600) (B=E02600) (C=E03424) NUT, LOCK M0 Z LEAD LEAD K (A=E02600) (B=E02600) (C=E03424) IRE, IRE, 0.6 K (A=E02600) (B=E02600) (C=E03424) NUT, M BRACKET ASSY HANDLE, REGULATOR SHAFT, HANDLE ++ CONTINUE ++

10 0CV0-M77400 Fig.5. LUB.OIL PUMP & GOVERNOR (A)=L48EE-DK3 (B)=L48EE-DKPA (C)=L48EE-DKPA BRACKET, RADIATOR BOLT, ADJUSTING SPRING PLATE, FRICTION ASHER NUT, LOCK M NUT, LOCK M BOLT, M6X 45 PLATED SCRE, TAPPING M6X BEARING, NEEDLE SEAL, OIL ASHER, THRUST PLATE (A=E02600) (B=E02600) (C=E03424) PLATE Z ASHER, 0 (A=E02600) (B=E02600) (C=E03424) ASHER, 0 Z NUT, CAP M0 (A=E02600) (B=E02600) (C=E03424) NUT, CAP M0 Z O-RING, AP2.5 (A=E02600) (B=E02600) (C=E03424) O-RING, AP2.5 Z PROTECTOR (A=E02600) (B=E02600) (C=E03424)

11 0CV0-M77400 Fig.6. COOLING & STARTING DEVICE (A)=L48EE-DK3 (B)=L48EE-DKPA (C)=L48EE-DKPA COVER BOLT, M6X 2 PLATED CASE, COOLING FAN CASE, COOLING FAN COLLAR SEAL, FAN CASE L= BOLT STARTER ASSY, RECOIL STARTER ASSY, RECOIL CASE, STARTER REEL RATCHET SPRING, SPIRAL ASHER, THRUST SPRING, FRICTION SPRING, RETURN COVER PLATE, FRICTION CIRCLIP KNOB, STARTER ROPE, STARTER PULLEY, STARTER PULLEY, STARTER BOLT, M6X 8 PLATED BOLT, M6X 2 PLATED PLUNGER HOLDER, PLUNGER PLUG, ABSORBER 4 4 4

12 0CV0-M77400 Fig.7. FUEL INJECTION PUMP (A)=L48EE-DK3 (B)=L48EE-DKPA (C)=L48EE-DKPA PUMP ASSY, INJECTION GASKET PLATE SPRING, PLUNGER BODY ASSY, PUMP VALVE ASSY, DELIVERY SPRING, DELIVERY HOLDER, DELIVERY GASKET, DELIVERY LEVER ASSY, CONTROL SEAT, SPRING A SEAT, SPRING B PIN, SPRING 2.0X PIN, SPRING 3.0X VALVE ASSY,INJECTION VALVE ASSY,INJECTION NUT, NOZZLE SPRING, NOZZLE SEAT, SPRING SPACER, VALVE STOP PIN HOLDER ASSY, NOZZLE PIN SHIM SET PIPE ASSY, INJECTION

13 0CV0-M77400 Fig.8. FUEL TANK & FUEL LINE (A)=L48EE-DK3 (B)=L48EE-DKPA (C)=L48EE-DKPA TANK ASSY, FUEL 2.5L CAP ASSY FILTER, FUEL GAUGE, LEVEL DAMPER, FUEL TANK GASKET, 8X PLUG, RETAINER FILTER ASSY, FUEL GASKET STAY, FUEL TANK STAY, FUEL TANK COCK ASSY, FUEL O-RING, AS BOLT ASHER, BOLT, M8X 45 PLATED NUT, M SCRE, TAPPING M6X CLIP, HOSE PIPE, FUEL L= CLIP, HOSE PIPE, FUEL RETURN FILTER ASSY, FUEL GASKET COCK ASSY, FUEL O-RING, AS NUT, M6 2

14 0CV0-M77400 Fig.9. TOOL,LABEL & GASKET SET (A)=L48EE-DK3 (B)=L48EE-DKPA (C)=L48EE-DKPA LABEL, AIR COOLED LABEL, YANMAR LABEL, OPERATION LABEL, CAUTION LABEL, HO TO START GASKET SET GASKET SET GASKET SET, HEAD O-RING GASKET, CRANK CASE GASKET SEAL, VALVE STEM GASKET, NOZZLE O-RING GASKET GASKET, AIR CLEANER GASKET, MUFFLER GASKET, BONNET O-RING, ASHER, SEAL O-RING, AS O-RING LABEL F.. LOCKING HANDLE REMOVER, FLYHEEL BOLT M 6X 45 PLATED BOLT, M8X 45 PLATED NUT, M NUT, M GUIDE INSTALLING TOOL INSTALLING TOOL Remarks () OPTIONAL PART.

15 Parts No. Index Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No A B C D E

16 Parts No. Index Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No. Parts No. Fig. No. Ref. No Parts No. Fig. No. Ref. No.