SPECIAL. OFFER # LIST PRICE REDUCTION UP TO 40%

Transcription

1 OFFER #0-017 EXPIRES 31st of December 017 PRICE REDUCTION UP TO %

2 StandardFLEX Innovative comb system for quick pull-down jaw plates change! 5% W5 FIVE YERS RRN TY *X StandardFLEX precision modular vise with standard equipment Free: * To be specified in case of order Set of 4 holding clamps rt n.4 T nuts rt.87 Vise type - 5kN 3 - kn 4 - kn 5 - kn Max opening Jaw width W 11 mm 146 mm 171 mm 196 mm Jaw height ase lenght D Code rt rt. soft rt.c smooth rt.e with step rt.f prismatic rt.138 square stack type jaw rt.150 stack type prismatic jaw rt.1 intermediate movable jaw * 0% XL Vises with much longer base than standard one * When bought with a complete vise XL vise with standard equipment+ Free: set of n. 6 holding clamps rt n.6 T nuts rt.87 Vise type - 5kN 3 - kn 4 - kn 5 - kn Max opening Jaw width W 15 mm 150 mm 175 mm 00 mm Jaw height ase lenght D Code rt. 1 (Single clamping) kg rt.138 square stack type rt.150 prismatic stack-type TE MOST SOLD rt.17 prismatic movable rt.313 magnetic parallel plates ll the components are built completely with high resistance steel and case hardened * 0% * When bought with a complete vise of December 017

3 C of December 017 Multiflex For multiple clamping from 1 to 1 workpieces of various sizes rt.616 Pair of magnetic parallel plates for rt. 600 Each vise is supplied for 4 workpieces clamping Standard equipment : T wrenches, positioning keynutsand 4 workstops + Type +0 mm C -0,0 D W 1mm Code OFFER FOR MGNETIC PRLLEL PLTES ND PRLLEL JW PLTES : * rt. 605 / 605W Fixed and movable jaws 1 Fixed and movable jaws with integral step % 74/99 rt /104 85/115 rt.645 Soft jaw rt.645c Smooth jaw rt.645d Serrated jaw rt.645e Step jaw rt.645f Prismatic jaw rt.645t GRIP jaw D rt.600 W rt.606 W Multitasking Self centering and eccentric vises Ideal for 5 axis machine centres rt.600 / rt.600w PRICE EXMPLE: rt.600 x600 ordered with 4 pairs of magnetic parallel plates PRICE: instead of 1 PRICE mm 34% Free: set of 6 holding clamps rt. 98 3/ x x / x x / x x kN 3/ x x / x x x x x x x x kn x x x x NEW x137, x14, x x x x x x kn x x % Standard equipement: 1 exagonal wrench, 1 T wrench, 1 workstop, 1 straight pin,1 positioning pin Vise rt.6 Type 1-16 kn Type - 0 kn Code Code Code C C Code D D Code E E Code F F Code T T rt.610e Parallel jaw plate for rt.606 =1 Risers for rt.6 Code rt.606 PRICE PRICE rt.641 SIMPLE Type 1 Type Code =145 Standard equipment : 1 pull-stud rt.10s / 11S 1 teflon cao with O-ring rt.9 1 positioning pin rt.6p, 1 shoulder calibrated screw rt.79 rt.63 (steel) Risers for rt.6 Type 1 Type Code * When bought with a complete vise Multiflex, The modular system with the largest range of applications available in the world W5 FIVE YERS RRN TY -0% when bought with a complete vise W5 FIVE YERS RRN TY 3

4 FMS PRECISION MODULR VISES Specific for horizontal and vertical machining centres 7% W5 FIVE YERS RRN TY rt.805q Fixed - steps small & big rt.810p - Movable Serrated, steps small & big rt.810p - Movable Serrated, steps small & big W Standard equipment: 1 ox wrench, positioning key-nuts and workstops + Free: n. 4 holding clamps rt. 98 Vise type W (94mm) - 5kN 3 (14mm) - kn 4 (144mm) - kn ase height ase width ase lenght C rt. 864 Double, single, self-centering vise with double step serrated jaws. vailable with smooth jaws ON REQUEST. C PRICE ase body rt.8 Code PRICE base body rt PRICE Complete Vise rt.864 Code PRICE Complete Vise rt With vise rt.864 purchase you get 1 jaw SVING 0% rt.810o Movable jaw with small and large step rt.805f Fixed jaw with double 3x5 step smooth Code O O O Code F F F rt.810p - Movable Serrated, steps small & big rt.805g - Fixed Serrated, steps 3x5 rt.810p - Movable Serrated, steps small & big rt.810x Floating movable jaw with 3x5 step with step block pin (rt.810z) rt.805 Soft fixed jaw rt.805g Fixed jaw with double 3x5 step serrated Code X X X Code Code G G G rt.805i Fixed jaw with double vertical prism Code I I I GERRDI MO GERRDI MO 137 rt.805v rt Fh 60% Fn 100% Max. 160Nm FMS VISE with IG JWS Possibility to use any FMS fixed jaw instead of jaw body rt.805v. Possibility of two positions (at 180 ) for each fixed jaw and for each movable base jaw rt C Free: n. 4 holding clamps rt. 98 Std. equipment: 1 ox wrench, positioning key-nuts and workstops 15 rt.868 rt.47t GRIP Self-centering vise (double or single option) with high jaws. Ideal for 5 axis machining centres Vise type W 3 (14mm) - kn Max opening ase lenght C Code The most complete modular system in the world of December 017

5 Tombstones Solid cast iron cast G with double stress relieving heat treatment 3% W5 FIVE YERS RRN TY 5 th MCINELE SIDE C C D rt.53 Code C kg rt. Code C D kg PRICE PRICE PRICE PRICE C E F One integral G cast iron casting rough milled with double stressrelieving heat treatment. Wall thickness mm (10 mm stock) Rough milled casting with machinead and hand scraped base face for direct clamping on European or Japanese standard pallet. ase with 4 precision holes Ø0F7 and bottom threads M16 with precise pitch dimensions for the use of our Zero Point or to interface with other pallets or head plates Cube completely finished with wall thickness roughly 38-mm. Tolerance ± 0,0 mm Integral cube with calibrated holes and solid threads. Tolerance ± 0,0 mm Integral cube with hardened bushing 100 Cr6 and stainless steel helicoils. Tolerance ± 0,0 mm E C rt.57 Code C E kg PRICE PRICE Integral Vise-Cube with base plate Tombstone with vises utomatic Dividing ead 500 / rt.700 rt.88 rt.863 rt.88 rt (included) Modular vise-cube STD series with custom made head plate Type Code Type Code Type Code Type Code rt.863c + 88 (included) Modular vise-cube FMS series with custom made head plate Type 3 x 6 0 Code C Type 3 x Code C Cube rt.57g with STD & XL vise Code: 8.57.G0010 ideal for STD / XL vises Type Code: 8.57.G001 ideal for STD / XL vises Type 3-4 undredth mounting and alignement included! Cube rt.57g with FMS vises Code: 8.57.G0010 ideal for FMS vises Type Code: 8.57.G001 ideal for FMS vises Type 3-4 undredth mounting and alignement included! TWO YERS WRRN TY years warranty! Ø Plug & Play! - Only 0V installation power is needed - Positions on ighest indexing accuracy (0 Sec.) - Minimum increment 0,00-00Nm radial ydraulic brake - eronautic aluminum body - Ground central hub hardened & ground rc6 800 rt.60 rt.88 rt (included) Modular vise-cube MULTIFLEX series with custom made head plate Type 4 x 11 0 Code Type 4 x Code Cube rt.57g with MULTIFLEX vises Code: 8.57.G00100 Code: 8.57.G00110 ideal for MULTIFLEX Type 1- Code: 8.57.G0010 ideal for MULTIFLEX vises Type 3 undredth mounting and alignement included! - Easy and quick programming trough touch screen or M function of December 017 Cast iron tombstone + steel vises = Stability & Precision 5

6 ZERO POINT Set up times reduced of 90% Dot. Standard: 1 pull-stud rt.10 1 Teflon cup with O-Ring rt.9 % TWO YERS WRRN TY 15 Ø138 Ø rt.665 Type PNEUMTIC uilt-in mounting Code Standard 10kN Option 18kN by increase springs 0 Ø138 Ø rt.664 Type PNEUMTIC Mounting with flange Code Standard 10kN Option 18kN by increase springs Ø rt.665s Type PNEUMTIC SINGLE uilt-in mounting Standard 10kN Code S Up to 5kN by Double effect system (spring + air) Ø178 rt.664s Type PNEUMTIC SINGLE Mounting with flange Standard 10kN Code S Up to 5kN by Double effect system (spring + air) Pneumatic Zero Point kit interfaced base plates KIT#1 KIT# KIT#3 KIT#4 FOR VERTICL CENTER FOR ORIZONTL CENTER FOR VERTICL CENTER FOR 5 XIS CENTER 00/ / /800 0/ / /50 Ø500/ / / rt. 81P SE PLTE 00x0 00x500 rt. 80P SE PLTE 0x0 500x500 6x6 rt. 81P SE PLTE 0x600 0x800 rt. 8P ROUNDED SE PLTE Ø0 Ø500 Ø L L P PREZZO E P Interface plates for Zero Point rt.61i rt.61e 00 0/500 rt.60e 00/50 600/ / Ø500/6 rt.6e 0/500 00/50 38 rt. 60i 38 rt. 61i 38 0/500 00/50 38 rt.6i rt.61e rt. 61i SMOOT 00x0 00x500 rt. 60i SMOOT 0x0 500x500 6x6 rt. 61i SMOOT 0x600 0x800 rt. 6i SMOOT Ø0 Ø500 Ø6 L L L P. E P rt. 61E INTEGRL GRID rt. 60E INTEGRL GRID rt. 60E INTEGRL GRID rt. 6E INTEGRL GRID L L P P Immediate Positioning & Clamping of December 017

7 ZERO POINT Set up times reduced of 90% Dot. Standard: 1 pull-stud rt.10 1 Teflon cup with O-Ring rt.9 % TWO YERS WRRN TY One supplier - customized solutions - best quality price / ratio - extended warranty MULTIPLE PNEUMTIC MOUNTING WIT FLNGE STEEL COVER PLTES rt.664 Clamping force 5 kn / olding force more than 60 kn / Pneumatic release 6 14 bar Positioning shank with axial compensation / Double pull-stud centering for Max rigidity / ir cleaning / 4 antirotation keyways / Double effect UILT-IN MOUNTING SINGLE PNEUMTIC rt.665 EFFICIENCY and PRODUCTIVITY are SERVED!!! MOUNTING WIT FLNGE rt.664s Clamping force 5 kn / olding force more than 60 kn / Pneumatic release 6 14 bar Positioning shank with axial compensation / Double pull-stud centering for Max rigidity / ir cleaning / 4 antirotation keyways / Double effect UILT-IN MOUNTING rt.665s of December 017 Gerardi ZERO - POINT, accurate, quick and safe 7

8 GERRDI TOOLING Driven Tools Upgrade Your Lathe and oost Productivity! 3% TWO YERS WRRN TY wide range of types in order to equip the CNC lathes and turrets of the most popular builders on the market with an unbeatable price/quality ratio. CCURCY and RELIILITY GURNTEED FOR YERS!! QUICK ND NO-EXPENSIVE SSISTNCE Y OUR TECNICL EXPERTS! Made in Italy Main ody Specially treated corrosion resistant integral stell body re-designed to improve rigidity and reduce vibrations. Internal Coolant ll the driven tools can be supplied with internal coolant option up to 100bar. Dry running possible! Torque & Rpm Rated to 100 Nm torque and Rpm. Outputs ER collets / WELDON / SK / CT / SK / T / CPTO or shell end milling cutter. Gleason Gears Gleason spiral bevel gears with ground teeth in order to guarantee a bigger torque, less noise and heating. Options: earings ngular contact, preloaded, high precision ball bearings + tape roller bearings on output spindle for better rigidity and longer life. INTERNL COOLNT IGER SPEED Ratio 1: / 1:4 COMPENSTED COLLETS MULTIPLE OUTPUTS QUICK CNGE VDI IGLI Din5480 / Din548 / Serie MT aruffaldi / Din1809 DMG MORI Serie NL - NZ DOOSN Serie MT45 / 65 / 75 / 85 S MZK Serie QTN 1 / / 3 QTS - Q MIYNO NKMUR Serie MT44 / OKUM Serie MT60 Driven Tools and Universal Quick Changes Compatibile with all ER outputs (with internal or external nuts) KIT #1 KIT # + + KIT #3 KIT #4 5 pcs o più + 4 pcs 1pc Gratis Purchase Driven tools + Quick changes Purchase 4 Driven tools + 4 Quick changes Purchase 5 or more driven tools (Codes available on the special offer) Purchase The Kit of 3 Quick Changes (Internal or External nuts) 15% 10 % and SVE on quick changes ordered if you ordered 1 quick changes 5% 15 % and SVE on 4 quick changes ordered if you order quick changes 0% and SVE Free + on 4 quick changes ordered 1 more quick change and SVE 15% PRICE 0 each 8 wide range of driven tools with an unbeatable price / quality ratio of December 017

9 MT Driven Tools Made in Italy Upgrade Your Lathe and oost Productivity! MT Cod ER Nm Rpm MT 45 / / 65 / 75 PRICE 99.DS.03 5 Max 57, DS.04 5 Max 57, DS.01 5 Max 57, DS.0 5 Max 57, DS.41 3 Max 7, DS.4 3 Max 7, DS.34 Max 90, DS.35 Max 90, DS DS DS DS DS DS DS DS oth direction of rotation to machine spindle available i1 f1 d d1 d t GERRDI TOOLING Compatibible with: DOOSN / RDINGE SMSUNG / WCEON YUNDI WI / VICTOR Compatibles for all lathes with standard MT turret: List Risparmi price d fino al 3% DUE NNI TWO YERS WRRN TY i GRNZI MT 45 MT MT 65 MT 75 MT 85 MT c1 d d1 d f1 f f , h1 h h3 i f c1 t1 f3 MT h1 h h3 i1 i t t , , CCURCY ND RELIILITY GURNTEED FOR YERS!! of December 017 wide range of driven tools with an unbeatable price / quality ratio 9

10 GERRDI TOOLING Vdi DIN69880 Driven Tools Upgrade Your Lathe and oost Productivity! d1 Cod ER Nm Rpm CCURCY and RELIILITY GURNTEED FOR YERS!! QUICK ND NO-EXPENSIVE SSISTNCE Y OUR TECNICL EXPERTS! DIN5480 Vdi DIN548 DIN ST ST ST ST In case of order specify always left or right orientation you need d1 Cod ER Nm Rpm SX DX left - right 3% Made in Italy TWO YERS WRRN TY 99.ST ST ST ST d1 99.ST ST ST ST d1 99.ST ST ST ST Vdi DIN69880 RUFFLDI In case of order specify always left or right orientation you need d1 Cod ER Nm Rpm 99.F F F F Vdi DIN1809 DIN69880 In case of order specify always left or right orientation you need d1 Cod ER Nm Rpm 99.DP DP DP DP d1 99.F F F F d1 99.DP DP DP DP iglia iglia MT MT MT Cod ER Rpm MT Cod ER Rpm 99.G , G.0.D 3 83, G G G G G G Direction of rotation same as machine spindle oth direction of rotation opposite to machine spindle * Dmg Mori NLX Cod ER Nm Rpm Cod ER Nm Rpm 99.MS.G , 89, MS.G , 89, MS.G6 86, 89, MS.G63 88, MS.7 3 Max MS.73 3 Max MS MS oth direction of rotation opposite to machine spindle * 10 wide range of driven tools with an unbeatable price / quality ratio * To be specified in case of order of December 017

11 GERRDI TOOLING aas Driven Tools Upgrade Your Lathe and oost Productivity! left - right CCURCY and RELIILITY GURNTEED FOR YERS!! QUICK ND NO-EXPENSIVE SSISTNCE Y OUR TECNICL EXPERTS! VDI SX DX 3% Made in Italy TWO YERS WRRN TY Interchangeable couplings for the different S turret h1 Cod ER h1 Nm Rpm , , , , , , h1 Cod ER h1 Nm Rpm , , , , , , Direction of rotation same as machine spindle Mazak QTN QUICK TURN NEXUS QTN 00/50 SUPER QUDREX TURN SQT 15/18-00/50 Mazak SMRT QTS1 QUICK TURN SMRT QTS 100M / 00M Cod ER Nm Rpm 99.MZ , Cod ER Nm Rpm 99.MZ.03 3 Max MZ , MZ.06 3 Max MZ MZ MZ MZ Miyano Ø45: X 51/64 T/T3 - NE 34/4 - NJ 4/51 Ø54: X 51/64 TY - X 51/64 SYY Nakamura MT44: WT100 -TW1 MT: SUPER NTJ-NTJX / NTM 3 / TMC 18 / TW10 / SC / WT / WTW 150 / WTS 150 / WT100 Ø Cod ER Nm Rpm MY ,9 57, MY ,9 57, MY ,7 79, MY ,7 79, MT Cod ER Nm Rpm NK. 5 Max 57, NK.43 5 Max 57, NK ,5 7, NK ,5 7, MY MY MY MY NK NK NK NK Okuma MT60: SPCE TURN L 00EX/ L 500EX / L00EX GENOS SERIES L0-MW / MULTUS U00/U007 LU00EX M / MY MT Cod ER Nm Rpm MT Cod ER Nm Rpm K.80 3 Max K.81 3 Max K K of December 017 wide range of driven tools with an unbeatable price / quality ratio 11

12 GERRDI TOOLING Classic XL Line ngle heads XL series Ideal for large machine tools and milling machines. These angle heads are designed for heavy duty cutting. Evolution Line Spindle speeders & Modular ngle eads Interchangeable shanks to fit any machine spindle G1 ONE YER URNTEED Made in Italy Made in Italy MTC Series (Manual quick change) TC Series (utomatic quick change) Type 4 Model Output Rpm Max Nm Optional lenght Type 1 (Ø10) Model Output Rpm Max Nm LONG series G90-SXL FS E FS E ,5 ISO T G90-SXLxx CT =0 =500 =600 =700 ±90 F90-7 ER F90-10 ER F90-16S ER FMU-10 ER FMU-16 ER GMU-S Type (Ø18) Model Output Rpm Max Nm LONG series Type 5 Model Output Rpm Max Nm Optional lenght F90-16 ER G90-S F90-0 ER ISO T G90-S50XLxx CT =0 =500 =600 =700 GMU-S Type 3 (Ø157) Model Output Rpm Max Nm F90-S SK/T FMU-0 ER LONG series - ±90 KIT #1 KIT # SPINDLE SPEEDERS INTERNL COOLNT LWYS POSSILE! Model i Output Rpm Max Nm + GSS-10S 1:8 ER ,5 GSS-10 1:6 ER ,8 Purchase 1 ngle head + 1 Quick change (Internal or External nuts) and SVE 5% (5% on quick change) 0 99 Purchase 1 ngle head + 1 RE-COOL nut (To obtain the internal coolant) and SVE 5% (5% on RE-COOL nut only) GSS-13 1:6 ER-0.000,8 GSS-16 1:6 ER ,5 GSS-0 1:6 ER GSS-6 1:4, ER GSS-34 1:4 ER Distributore: GERRDI SP via Giovanni XXIII, LONTE POZZOLO (V) Italia Tel Fax gerardi@gerardispa.com - Distributor: