Alberti LIVE TOOLS DOOSAN MACHINE TOOLS AMERICA

Size: px

Start display at page:

Download "Alberti LIVE TOOLS DOOSAN MACHINE TOOLS AMERICA"

Alyson Fleming
5 years ago
Views:

1 c te ca Me LIVE DOOSAN N 9b DI 8/ O 0x1 CC x3 TA 0.8 AT 6x 16 W MACHINE AMERICA Thompson Rd East Windsor CT Fax info@komaprecision.com T

ALBERTI lathe tooling is designed to facilitate unmatched precision when machining parts with demanding complexity. Over 250 types of standard live tools are available from stock.

Turn your CNC Lathe into an ultimate performance profit center with tooling from ALBERTI and KOMA PRECISION.

DMG / Mori Seiki Doosan Feeler Hwacheon Hyundai Wia Mazak Nakamura Okuma Samsung 4 5 9 10 13 15 18 2 4 50 Tooling Build Features GS 600 Cast Iron Tool Bodies : Gleason Gears GS 600 ADVANTAGES: High

2 ALBERTI lathe tooling is designed to facilitate unmatched precision when machining parts with demanding complexity. Over 250 types of standard live tools are available from stock. With over 12,000 tools installed, KOMA PRECISION is the world s largest supplier for ALBERTI - the originator and the foremost innovator of productivity tooling. Turn your CNC Lathe into an ultimate performance profit center with tooling from ALBERTI and KOMA PRECISION. Innovative design, passionate attention to detail, and state of the art production facilities result in unmatched precision at an affordable price. DMG / Mori Seiki Doosan Feeler Hwacheon Hyundai Wia Mazak Nakamura Okuma Samsung Tooling Build Features GS 600 Cast Iron Tool Bodies : Gleason Gears GS 600 ADVANTAGES: High tensile strength - 60kg/mm² (40% higher than steel, twice that of aluminum). High compression strength (absorbs vibration). Low thermal expansion (maintains accuracy & bearing pre-loads). Excellent dimensional stability (maintains accuracy). TOOL BODY FEATURES: Bodies are completely machined inside & outside contributing to uniform weight. Bearing housing surfaces are ground. MATERIAL: GS 600 Spheroidal Cast Iron GS 600 is the same cast iron as used for the beds of machine tools. GS 600 features a low percentage of carbon, and spheroids are added during casting to provide compact grain structure and enhance the mechanical features of the material. Bodies are chromium plated with (2) precision-lapped surfaces parallel to the tool output spindle for accurate alignment. All bevel gears used are spiral Gleason gears, not spur gears. Gleason gears provide more than one tooth of engagement thereby creating optimized meshing of the teeth, greater power transmission, and reduced noise during operation. Gleason provides the following computerized data computation for each set of gears used in tools: Maximum pitch diameter. Ultimate strength of the material. Minimum & maximum RPM of the gears. GEARING MATERIAL - ADJUSTABLE ANGLE : Aerospace/military grade steel with ultimate strength of 300 kg/mm². GEARING MATERIAL - ALL OTHER MODELS: Same steel as in the gears of Formula One race car transmissions with an ultimate strength of 190 kg/mm². (A good gear steel has an ultimate strength of 120 kg/ mm².) 2

System New from, a complete range of live tools

additional projection to reduce the chance of

s patent pending design creates three points of

tool holder output surfaces so there is no

the speed and convenience of quick-change tooling.

stay in the machine with only the adapters needing

This provides improved efficiency and flexibility,

QUICK EASY PRECISE Triple Contact System Low

Third Contact Point This system incorporates a

adapter for extreme rigidity and accuracy.

clamp & wrench system quickly and precisely locks

of Adapters Run-Out of the Collet Chuck with

0.006 µm 20 seconds Accuracy with Gauge Bar

003mm (0.0001 in.) Run Out with System 120mm (4.

3 System New from, a complete range of live tools with interchangeable adapters for Okuma are now available in stock. The System units have a standard profile with no additional projection to reduce the chance of interference with the machine s enclosures. s patent pending design creates three points of contact between the driven tool holder body and tool holder output surfaces so there is no compromise in concentricity and rigidity to gain the speed and convenience of quick-change tooling. With the System one set of live tools can always stay in the machine with only the adapters needing to be changed. This provides improved efficiency and flexibility, plus a reduction in overall tooling costs. QUICK EASY PRECISE Triple Contact System Low Profile How It Works First & Second Contact Points Third Contact Point This system incorporates a triple contact support between the body and adapter for extreme rigidity and accuracy. Clamping Un-Clamping The patent pending collet clamp & wrench system quickly and precisely locks the quick change adapter, reducing tool cutter changing time to a minimum. Highest Accuracy & Repeatability Large Selection of Adapters Run-Out of the Collet Chuck with Adapter Mounted Repeatability Adapter Change Time µm 20 seconds Accuracy with Gauge Bar Inserted in the Collet Chuck Repeatability 0.003mm ( in.) Run Out with System 120mm (4.72in.) 40mm (1.57in.) Max ( in.) Max ( in.) Accuracy with Gauge Bar Inserted in the Collet Chuck at 40mm = 0.008mm (1.57in. = in.) at 120mm = 0.01mm (4.72in. = in.) ER Collet Chuck Weldon Shell Mill 3

90 DUAL OUTPUT 90 UNIVERSAL NL 1500 NL 2000 NL 2500 NL 3000 MA-3.

5 GH-44323-00 GH-44324-00 GH-44325-00 GH-44326-00 ER-32 ER-32 ER-32/32

5 RI GH-44617-00 GH-44621-00 ER-32 ER-32-45/33 MA-4.5 M90-4.5 M90-4.5 2U MCU-3.

ER-32-45/33 45/33 20/15 6,000 6,000 MA-4.5 RI M90-4.

Maximum 90 UNIVERSAL NZ 1500 NZ 2000 MA-2.5 M90-2.5 MCU-1.

4 90 DUAL OUTPUT 90 UNIVERSAL NL 1500 NL 2000 NL 2500 NL 3000 MA-3.5 M M U MCU-3.5 GH GH GH GH ER-32 ER-32 ER-32/32 ER-32-45/33 45/33 20/15 6,000 6,000 MA-3.5 RI M RI GH GH ER-32 ER-32-45/33 MA-4.5 M M U MCU-3.5 GH GH GH GH ER-40 ER-40 ER-40/40 ER-32-45/33 45/33 20/15 6,000 6,000 MA-4.5 RI M RI GH GH ER-40 ER-40-45/33 = 70 Bar/1050 PSI RPM = Maximum 90 UNIVERSAL NZ 1500 NZ 2000 MA-2.5 M MCU-1.5 GH GH GH ER-25 ER-25 ER-16-25/18 16/11.8 6,000 MA-2.5 RI M RI GH GH ER-25 ER-25-25/18 = 70 Bar/1050 PSI RPM = Maximum 4

5 DOOSAN MACHINE AMERICA 90 DUAL OUTPUT 90 BMT-55 Lynx 300M Puma 240MB Puma 240MC Puma 2100M Puma 2100MS Puma 2100Y Puma 2100SY Puma MX2100ST Puma TL2500LM Puma TT1500SY Puma TT1800SY GH GH GH ER-25 ER-25 ER / /18.5 6,000 GH GH ER-25 ER /18.5 = 70 Bar/1050 PSI RPM = Maximum 5

6 DOOSAN MACHINE AMERICA 90 DUAL OUTPUT 90 ADJUSTABLE BMT-65 Puma 300MC Puma 300LMC Puma 2600LM Puma 2600MS Puma 2600MSB Puma 2600LMS Puma 2600Y Puma 2600LY Puma 2600SY Puma 3100Y Puma 3100LY Puma 3100ULY Puma 3100XLY Puma MX2600ST Puma V400M Puma TT2500SY GH GH GH GH ER-32 ER-32 ER-32 ER-25-45/ / /33.2 6,000 6,000 GH GH ER-32 ER-32-45/33.2 = 70 Bar/1050 PSI RPM = Maximum 6

7 DOOSAN MACHINE AMERICA 90 DUAL OUTPUT 90 BMT-75 GH GH GH Puma 400MB Puma 400MC Puma 400LMB Puma 400LMC Puma 480XLM Puma V550M PumaV550M-2SP ER-40 ER-40 ER-40-50/37 50/37 6,000 GH GH ER-40 ER-40-50/37 = 70 Bar/1050 PSI RPM = Maximum 7

DOOSAN MACHINE AMERICA BMT-85 90 Puma 700M Puma 700LM Puma 700XLM Puma 700XLY Puma 800M Puma 800LM Puma 800XLM Puma 800XLY Puma

8 DOOSAN MACHINE AMERICA BMT Puma 700M Puma 700LM Puma 700XLM Puma 700XLY Puma 800M Puma 800LM Puma 800XLM Puma 800XLY Puma VT900M Puma VT1100M GH GH ER-50 ER /74 GH GH ER-50 ER /74 = 70 Bar/1050 PSI RPM = Maximum 8

9 90 DUAL OUTPUT 90 BMT-60 AF-1510 AF-1513 AF U GH GH GH HT30MC HT30Y HT30SY ER-32 ER-32 ER-32-45/ /33.2 6,000 AF-1510C AF-1513C GH GH ER-32 ER-32-45/33.2 = 70 Bar/1050 PSI RPM = Maximum 90 DUAL OUTPUT 90 ADJUSTABLE BMT-65 AMF AMF AMF MCU-2.5 FT-200MC FT-250MC FT-350MC FT-350MCAL GH GH GH GH ER-32 ER-32 ER-32 ER-25-45/ / /33.2 6,000 6,000 AMF C AMF C GH GH ER-32 ER-32-45/33.2 = 70 Bar/1050 PSI RPM = Maximum 9

10 90 DUAL OUTPUT 90 BMT-55 MA-2.5 M M U CUTEX 160A CUTEX 160B GH GH GH ER-25 ER-25 ER / /18.5 6,000 MA-2.5 IC M IC GH GH ER-25 ER /18.5 = 70 Bar/1050 PSI RPM = Maximum 10

11 90 DUAL OUTPUT 90 ADJUSTABLE BMT-65 CUTEX 240A CUTEX 240B CUTEX 240C HITECH 200A HITECH 200B HITECH 200C HITECH 350A HITECH 350B HITECH 450A HITECH 450B HITECH 450C T2 VT 450 MA-3.5 M M U MCU-2.5 GH GH GH GH ER-32 ER-32 ER-32 ER-25-45/ / /33.2 6,000 6,000 MA-3.5 IC M IC GH GH ER-32 ER-32-45/33.2 = 70 Bar/1050 PSI RPM = Maximum 11

12 90 BMT-75 MA-4.5 M HITECH 550A HITECH 550B HITECH 550BB VT 650 GH GH ER-40 ER-40-50/37 MA-4.5 IC GH M IC GH ER-40 ER-40-50/37 = 70 Bar/1050 PSI RPM = Maximum 90 BMT-85 HITECH 850 HITECH 850BB HITECH 850BB+ VT 950 VT MA-5.0 GH M GH ER-50 ER /74 MA-5.0 IC GH M IC GH ER-50 ER /74 = 70 Bar/1050 PSI RPM = Maximum 12

13 CROSS DRILL FACE DRILL DUAL OUTPUT FACE BMT-55 L230LMSA LF1600M/2SP LF1800M/2SP LF2000M/2SP GH GH GH ER-25 ER-25 ER / /18.5 6,000 GH GH ER-25 ER /18.5 = 70 Bar/1050 PSI RPM = Maximum CROSS DRILL FACE DRILL DUAL OUTPUT FACE ADJUSTABLE BMT-65 L300MA L300MSA L300LMA L300LMSA L300MC L300MSC L300LMC LF2500M/2SP GH GH GH GH ER-32 ER-32 ER-32 ER-25-45/ / /33.2 6,000 6,000 GH GH ER-32 ER-32-45/33.2 = 70 Bar/1050 PSI RPM = Maximum 13

CROSS DRILL FACE DRILL DUAL OUTPUT FACE BMT-75 L400MA L400MC L400LMC LV500RM LV500LM LV800RM LV800LM GH-44946-00 GH-44948-00 GH-44950-00 ER-40 ER-40 ER-40-50/37 50/37 6,000 GH-44947-00 GH-44949-00

14 CROSS DRILL FACE DRILL DUAL OUTPUT FACE BMT-75 L400MA L400MC L400LMC LV500RM LV500LM LV800RM LV800LM GH GH GH ER-40 ER-40 ER-40-50/37 50/37 6,000 GH GH ER-40 ER-40-50/37 = 70 Bar/1050 PSI RPM = Maximum CROSS FACE DRILL DRILL BMT-85 L600MA L600LMA L700MA L700LMA LV1100RM GH GH ER-50 ER /74 GH GH ER-50 ER /74 = 70 Bar/1050 PSI RPM = Maximum 14

15 90 UNIVERSAL MULTIPLEX 6100 MULTIPLEX 610 MULTIPLEX 6200 MULTIPLEX 620 MULTIPLEX 6300 MULTIPLEX 630 4:1 Speeder MA-3.5 R M MCU-2.5 GH GH GH ER-32 ER-32 ER-25 30/22 25/18 20/15 6,000 MA-3.5 RI M RI GH GH ER-32 ER-32 30/22 25/18 MA-3.5 R M MCU-2.5 GH GH GH ER-32 ER-32 ER-25 30/22 25/18 20/15 6,000 MA-3.5 RI M RI GH GH ER-32 ER-32 30/22 25/18 MA-3.5 RE M E MCU-1.5 E GH GH GH ER-32 ER-32 ER-16 15/11 15/11 15/11 RPM 12,000 12,000 12,000 MA-5.0 R M MCU-3.5 GH GH GH ISO 40 ISO 40 ER-32 75/55 75/55 32/25 6,000 MA-5.0 RI M RI GH GH ISO 40 ISO 40 75/55 75/55 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 15

16 90 DUAL OUTPUT 90 UNIVERSAL SQT 10 SQT 100 NEXUS QTN 100/150 4:1 Speeder MA-2.5 R M M U MCU-2.5 GH GH GH GH ER-25 ER-25 ER-25/16 ER-25 30/22 25/18 25/18 20/15 6,000 6,000 MA-2.5 RI M RI GH GH ER-25 ER-25 30/22 25/18 MA-2.5 RE M E MCU-1.5 E GH GH GH ER-25 ER-25 ER-16 15/11 15/11 15/11 RPM 12,000 12,000 12,000 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 16

90 DUAL OUTPUT 90 UNIVERSAL SQT 200/250 SQT 15/18 M NEXUS QTN 200/250 4:1 Speeder MA-3.

5 GH-44184-00 GH-44186-00 GH-44277-00 GH-44093-00 ER-32 ER-32 ER-32/20 ER-25 40/30 45/33

5 RI GH-44278-00 GH-44229-00 ER-32 ER-32 40/30 45/33 MA-3.5 RE M90-3.5 E MCU-1.

12,000 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = 0.

5-16mm ER-32 = 1-20mm ER-40 = 2-30mm 90 UNIVERSAL SQT 28 NEXUS QTN 350/450 MA-5.0 M90-5.

17 90 DUAL OUTPUT 90 UNIVERSAL SQT 200/250 SQT 15/18 M NEXUS QTN 200/250 4:1 Speeder MA-3.5 R M M U MCU-2.5 GH GH GH GH ER-32 ER-32 ER-32/20 ER-25 40/30 45/33 45/33 20/15 6,000 6,000 MA-3.5 RI M RI GH GH ER-32 ER-32 40/30 45/33 MA-3.5 RE M E MCU-1.5 E GH GH GH ER-32 ER-32 ER-16A 30/22 30/22 6/4 RPM 12,000 12,000 12,000 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 90 UNIVERSAL SQT 28 NEXUS QTN 350/450 MA-5.0 M MCU-3.5 GH GH GH ISO 40 ISO 40 ER-32 75/55 75/55 32/25 6,000 MA-5.0 RI M RI GH GH ISO 40 ISO 40 75/55 75/55 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 17

18 AXIAL DUAL OUTPUT AXIAL TRIPLE OUTPUT RADIAL DUAL OUTPUT WT-100 WY-100 SUPER NTY 3 NTJ-100 NTMX Extended Length 2:1 Speeder Extented Length MA-1.5 2U MA-1.5 3U M U GH GH GH ER-16A ER-16A ER-16A 15.6/ / /11.5 6,000 MA-2.5 2U H75 MA-2.5 3U H75 M F 2U H75 GH GH GH ER-16A ER-16A ER-16A 15.6/ / /11.5 6,000 M FS 2U H75 GH ER-16A 15.6/11.5 6,000 RPM Maximum ER-16A = mm 3/4 FACE & O.D. CUTTING S WT-100 WY-100 SUPER NTY 3 NTJ-100 NTMX A21411 A21421 A21490 A21478 A21417 A8425 KH KH KH KH KH KH /4 CUT OFF 1 CUT OFF 3/4 CUT OFF 1 COOLANT 1 DOUBLE BAR 3/4 TRIPLE BAR WT-100 WY-100 SUPER NTY 3 NTJ-100 NTMX Price A21431 A22074 A21441 A22412 A21491 KH KH KH KH KH A22417 KH

CROSS DRILL OFFSET CROSS DRILL FACE DRILL DUAL OUTPUT FACE ADJUSTABLE ANGLE WT-100 WY-100 SUPER NTY 3

A26333-2U-WT100 AUAT 0.5 GH-44586-00 GH-44587-00 GH-44772-00 GH-44639-00 ER-25A ER-25A ER-25A ER-11-25.

1/18.5 25.1/18.5 A26330C A26333C GH-44635-00 GH-44637-00 ER-25A ER-25A - 25.1/18.5 A26333C H75 GH-44981-00 ER-25A 25.

5 15.6/11.5 RPM 12,000 12,000 A26333S H75 GH-44982-00 ER-16A 15.6/11.5 RPM 12,000 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.

19 CROSS DRILL OFFSET CROSS DRILL FACE DRILL DUAL OUTPUT FACE ADJUSTABLE ANGLE WT-100 WY-100 SUPER NTY 3 NTJ-100 NTMX Extended Length Extented Length 2:1 Speeder 2:1 Speeder Extented Length A26330 A26333 A U-WT100 AUAT 0.5 GH GH GH GH ER-25A ER-25A ER-25A ER / / /7 6,000 6,000 A26333 H75 A U H75 GH GH ER-25A ER-25A 25.1/ /18.5 A26330C A26333C GH GH ER-25A ER-25A /18.5 A26333C H75 GH ER-25A 25.1/18.5 A26330S A26333S GH GH ER-16A ER-16A 15.6/ /11.5 RPM 12,000 12,000 A26333S H75 GH ER-16A 15.6/11.5 RPM 12,000 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 19

CROSS DRILL FACE DRILL DUAL OUTPUT ADJUSTABLE OFFSET FACE FACE ANGLE EXTENDED DRILL FACE DRILL EXTENDED TW-10 SC-150 WT-150 WT-150LB SUPER NTJ 2:1 Speeder 2:1

5-TW10 KZ-1513 D KZ-1513 R75 GH-41510-00 GH-41513-00 GH-44164-00 GH-44132-00 GH-41513-21 GH-41513-19 ER-25 ER-25 ER-25 ER-16 ER-25 ER-25-25.1/18.5 25.1/18.5 6.

5 25/18 6,000 6,000 6,000 6,000 KZ-1510-ER32 KZ-1513-ER32 KZ-1513 D KZ-1513-2U-R75 GH-41510-03 GH-41513-08 GH-41513-09 GH-41513-23 ER-32 ER-32 ER-32

5 25.1/18.5 6,000 KZ-1510C-ER32 KZ-1513C-ER32 KZ-1513 DC GH-41510-06 GH-41513-12 GH-41513-13 ER-32 ER-32 ER-32-45/33.2 29.

20 CROSS DRILL FACE DRILL DUAL OUTPUT ADJUSTABLE OFFSET FACE FACE ANGLE EXTENDED DRILL FACE DRILL EXTENDED TW-10 SC-150 WT-150 WT-150LB SUPER NTJ 2:1 Speeder 2:1 Speeder 4:1 Speeder ** ** * * KZ-1510 KZ-1513 KZ U MCU1.5-TW10 KZ-1513 D KZ-1513 R75 GH GH GH GH GH GH ER-25 ER-25 ER-25 ER-16 ER-25 ER / / / / /18 6,000 6,000 6,000 6,000 KZ-1510-ER32 KZ-1513-ER32 KZ-1513 D KZ U-R75 GH GH GH GH ER-32 ER-32 ER-32 ER-25/25-45/ /22 29/22 6,000 6,000 KZ-1510C KZ-1513C KZ-1513 DC GH GH GH ER-25 ER-25 ER / /18.5 6,000 KZ-1510C-ER32 KZ-1513C-ER32 KZ-1513 DC GH GH GH ER-32 ER-32 ER-32-45/ /22 6,000 KZ-1510S-2:1 KZ-1513 DS GH GH ER-20A ER-20A 15.6/ /11.5 RPM 12,000 12,000 KZ-1513 DCS GH ER /11.5 RPM 12,000 MCU1.5-TW10S GH ER-16 4/3 RPM 12,000 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm * EXTENDED REACH - USED WITH Y AXIS (SEE TOOL DRAWING) ** DO NOT USE THIS TOOL WITH THE TW-10 MODEL. (SEE TOOL DRAWING) 20

CROSS DRILL FACE DRILL EXTENDED OFFSET FACE EXTENDED DRILL FACE DRILL DUAL OUTPUT ADJUSTABLE FACE ANGLE AS-200 NTY 3-250 SC-200 SC-250 WT-250 WTS-150 WTW-150 SUPER NTJX NTM 3 2:1 Speeder 2:1 Speeder

21 CROSS DRILL FACE DRILL EXTENDED OFFSET FACE EXTENDED DRILL FACE DRILL DUAL OUTPUT ADJUSTABLE FACE ANGLE AS-200 NTY SC-200 SC-250 WT-250 WTS-150 WTW-150 SUPER NTJX NTM 3 2:1 Speeder 2:1 Speeder 4:1 Speeder KZ-1510 KZ-1513 R75 KZ-1513 D KZ-1513 KZ U MCU1.5-TW10 GH GH GH GH GH GH ER-25 ER-25 ER-25 ER-25 ER-25 ER-16-25/ / / / /4.5 6,000 6,000 6,000 6,000 KZ-1510-ER32 KZ U-R75 KZ-1513 D KZ-1513-ER32 GH GH GH GH ER-32 ER-25/25 ER-32 ER-32-29/ /22 45/33.2 6,000 6,000 KZ-1510C KZ-1513 DC KZ-1513C GH GH GH ER-25 ER-25 ER / /18.5 6,000 KZ-1510C-ER32 KZ-1513 DC KZ-1513C-ER32 GH GH GH ER-32 ER-32 ER /22 45/33.2 6,000 KZ-1510S-2:1 KZ-1513 DS GH GH ER-20A ER-20A 15.6/ /11.5 RPM 12,000 12,000 KZ-1513 DCS GH ER /11.5 RPM 12,000 MCU1.5-TW10S GH ER-16 4/3 RPM 12,000 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm * WILL NOT REACH CENTER - (SEE TOOL DRAWING) * * 21

22 CROSS DRILL FACE OFFSET FACE DRILL DRILL DUAL OUTPUT FACE ADJUSTABLE ANGLE TW-20 SC-300 WT-300 SUPER NTX SUPER NTXS 2:1 Speeder 2:1 Speeder 4:1 Speeder KR-2310 KR-2313 KR-2313 D KR U MCU1.5-TW20 GH GH GH GH GH ER-32 ER-32 ER-32 ER-32 ER-16-45/ / / /4.5 6,000 6,000 6,000 KR-2310 C KR-2313 C KR-2313 DC GH GH GH ER-32 ER-32 ER-32-45/ /33.2 6,000 KR-2310 S KR-2313 DS GH GH ER-25A ER / /18.5 RPM 12,000 12,000 KR-2313 DCS GH ER /18.5 RPM 12,000 MCU1.5-TW20S GH ER-16 4/3 RPM 12,000 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm ** DO NOT USE THIS TOOL WITH THE TW-20 MODEL. (SEE TOOL DRAWING) ** ** 22

CROSS FACE DRILL DRILL ANGLE ADJUSTABLE TW-30 SC-450 STW-40 STS-40 KR-3510 KR-3513 MCU2.

3/15 6,000 KR-3510 C KR-3513 C GH-43510-02 GH-43513-02 ER-40 ER-40-74.9/55.

WT150 SC200L NTY 3 JUMBO SUPER NTY 3 KG-4310 KG-4313 KG-4313 2U MCU-1.

23 CROSS FACE DRILL DRILL ANGLE ADJUSTABLE TW-30 SC-450 STW-40 STS-40 KR-3510 KR-3513 MCU2.5-TW30 GH GH GH ER-40 ER-40 ER / /15 6,000 KR-3510 C KR-3513 C GH GH ER-40 ER /55.3 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm CROSS DRILL FACE DRILL DUAL OUTPUT FACE ADJUSTABLE ANGLE SUPER MILL WY250 WT150 SC200L NTY 3 JUMBO SUPER NTY 3 KG-4310 KG-4313 KG U MCU-1.5 GH GH GH GH ER-32 ER-32 ER-32 ER-16-45/ / /4.5 6,000 6,000 KG-4313 GH ER-32 / H=75 45/33.2 KG-4310 C KG-4313 C GH GH ER-32 ER-32-45/33.2 = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 23

24 #1: LB2000M, LB2500M, LB3000M, LU3000M Lathes Reference Package #: GH End Face Mill Units ER-32 50/37 Internal Collet Wrench * Collet Wrench Side Face Mill Units - ER-32A* 50/37 - Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (1) Collet Wrench (1) Internal Collet Wrench* (2) Spindle Fixtures *Use the internal collet wrench with A-Series outputs #2: LB2000M, LB2500M, LB3000M, LU3000M Lathes Reference Package #: GH IC Package End Face Mill Units ER-32 Internal Collet Wrench * Collet Wrench 50/37 Side Face Mill Units 1000 psi ER-32A* 50/ psi Package Includes: (2) End Face Mill Units w/ic (2) Side Face Mill Units w/ic (1) Collet Wrench (1) Internal Collet Wrench* (2) Spindle Fixtures *Use the internal collet wrench with A-Series outputs 24

#3: LB2000M/MY, LB2520M/MY, LB3000M/MY Lathes Reference Package #: GH-77115-00 Static Tool Package KH-20021-00 Tool Size 3/4 or 1 KH-20022-00

LB2500MYW, LB3000MYW Lathes Reference Package #: GH-77116-00 Static Tool Package KH-20020-00 Tool Size 1 1/2 Bar KH-20034-00 Tool Size 1 x 1

25 #3: LB2000M/MY, LB2520M/MY, LB3000M/MY Lathes Reference Package #: GH Static Tool Package KH Tool Size 3/4 or 1 KH Tool Size 3/4 or 1 KH Tool Size 1 1/2 Bar Package Includes: (3) KH (1) KH (2) KH (6) Plugs #4: LB2000MYW, LB2500MYW, LB3000MYW Lathes Reference Package #: GH Static Tool Package KH Tool Size 1 1/2 Bar KH Tool Size 1 x 1 KH Tool Size 1 x 1 KH Tool Size 1 1/2 Bar Package Includes: (2) KH (3) KH (1) KH (1) KH (5) Plugs 25

90 UNIVERSAL HOBBING HEAD SPACE TURN LB2000M LB2500M LB3000M LU3000M SPACE TURN LB4000EX Speeder MA-3.5 M90-3.5 MCU-1.

26 90 UNIVERSAL HOBBING HEAD SPACE TURN LB2000M LB2500M LB3000M LU3000M SPACE TURN LB4000EX Speeder MA-3.5 M MCU-1.5 GH GH GH GH ER-32A ER-32 ER-16A - 50/37 10/7.4 40/30 6,000 4,500 MA-3.5 RI M RI GH GH ER-32A ER-32-50/37 M GH Price $6,500 ER-20 30/22 RPM 12,000 MA-4.5 M MCU-1.5 GH GH GH GH ER-40 ER-40 20A - 50/37 10/7.4 40/30 6,000 4,500 MA-4.5 RI M RI GH GH ER-40 ER-40-50/37 Straight Tools = 70 Bar/1000 PSI 90 Tools = 70 Bar/1000 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32/ER-32A = 1-20mm ER-40 = 2-30mm 26

27 #5: LB4000M Model Lathe Reference Package #: GH End Face Mill Units ER-40 50/37 Collet Wrench Side Face Mill Units - ER-40 50/37 - Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures #6: LB4000M Model Lathe (with internal coolant) Reference Package #: GH IC Package End Face Mill Units ER-40 50/37 Collet Wrench Side Face Mill Units 1000 psi ER-40 50/ psi Package Includes: (2) End Face Mill Units w/ic (2) Side Face Mill Units w/ic (2) Wrenches (2) Spindle Fixtures 27

#7: LB4000M/MY Model Lathe Reference Package #: GH-77117-00

Tool Size 1 x 1 KH-20040-00 Tool Size 1 1/2 Bar Package

28 #7: LB4000M/MY Model Lathe Reference Package #: GH Static Tool Package KH Tool Size 1 x 1 KH Tool Size 1 x 1 KH Tool Size 1 1/2 Bar Package Includes: (3) KH (1) KH (2) KH (6) Plugs 28

11 / 4 CUT-OFF 1 1 / 2 COMBI 5/ 8 FACE/ O.D.

Lathe Model SPACE TURN LB2000EX LB2500EX KH-20021-00 KH-20022-00 KH-20023-00

x 5 / 8 5 / 8 x 5 / 8 1 1 / 4 CUT-OFF 1 1 / 2 COMBI SPACE TURN LB3000EX

1 / 2 COMBI 1 1 / 2 DOUBLE COMBI KH-20034-00 KH-20035-00 KH-20023-00

CUT-OFF 1 1 / 2 COMBI Lathe Model SPACE TURN LB4000EX KH-20041-00 KH-20042-00

29 1 FACE/O.D. 1 FACE/I.D. 11 / 4 CUT-OFF 1 1 / 2 COMBI 5/ 8 FACE/ O.D. 5/ 8 FACE/ O.D. Lathe Model SPACE TURN LB2000EX LB2500EX KH KH KH KH KH KH Tool Size ¾ or 1 ¾ or 1 1¼ 1½ Bar* 5 / 8 x 5 / 8 5 / 8 x 5 / 8 1 FACE/O.D. 1 FACE/I.D. 1 1 / 4 CUT-OFF 1 1 / 2 COMBI 5/ 8 FACE/ O.D. 5/ 8 FACE/ O.D. SPACE TURN LB3000EX KH KH KH KH KH KH Tool Size ¾ or 1 ¾ or 1 1¼ 1½ Bar* 5 / 8 x 5 / 8 5 / 8 x 5 / 8 1 FACE/O.D. 1 FACE/I.D. 11 / 4 CUT-OFF 1 1 / 2 COMBI 1 1 / 2 DOUBLE COMBI KH KH KH KH KH Tool Size 1 x 1 1 x 1 1¼ 1½ Bar* 1½ Bar* 1 FACE/O.D. 1 FACE/I.D. 11 / 4 CUT-OFF 1 1 / 2 COMBI Lathe Model SPACE TURN LB4000EX KH KH KH KH Tool Size 1 x 1 1 x 1 1¼ 1½ Bar* ACCESSORIES: BORING BAR SLEEVES* GP GP GP GP ½ ¾ 1 1¼ 29

As a member of Partners in THINC, KOMA Precision is able to

57,000 square foot Partners in THINC facility in Charlotte, NC.

30 As a member of Partners in THINC, KOMA Precision is able to seamlessly integrate our tooling products with Okuma One Source technologies. KOMA tooling products are available for demonstration at the 57,000 square foot Partners in THINC facility in Charlotte, NC. KOMA sales and engineering resources are also resident at the Partners in THINC facility. The E-Z Alignment Blocks E-Z adjustable alignment blocks simplify precise tool alignment on limited access turrets. An alignment block is standard on 90 and universal angle tools. 30

31 #8: GENOS L200, ESL-8 Model Lathes Reference Package #: GH End Face Mill Units ER-25 16/11.8 Collet Wrench Side Face Mill Units - ER-25 16/ Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures #9: GENOS L200, ESL-8 Model Lathes Reference Package #: GH IC Package End Face Mill Units ER-25 16/11.8 Collet Wrench Side Face Mill Units 145 ER-25 16/11.8 1,000 Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures 31

32 90 90 OFFSET UNIVERSAL Y-AXIS OFFSET 90 DISC GENOS L200 ES-L8II LB-200M LR-10M LB-10IIM LB-10M MA-2.5 M M D MCU-1.5 GH GH GH GH KH KH ER-25 ER-25 ER-25 ER-16 ER-25 3/4 Arbor - 16/ / / / /29.5 6,000 6,000 6,000 2,500 MA-2.5 RI M RI GH GH ER-25 ER-25-16/11.8 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm OFFSET FRONT OFFSET BACK OFFSET DUAL OFFSET UNIVERSAL Y-AXIS OFFSET 90 DISC LB-200MW MA-2.5 R MA-2.5 R MA-2.5 R 2U M M D MCU-1.5 GH GH GH GH GH GH KH KH ER-25 ER-25 ER-25 ER-25 ER-25 ER-16 ER-25 3/4 Arbor 16/ / / / / / / /29.5 6,000 6,000 6,000 6,000 6,000 2,500 M RI GH ER-25 16/11.8 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 32

33 #10: GENOS L300, ESL-10 Model Lathes Reference Package #: GH End Face Mill Units ER-32 50/37 Collet Wrench Side Face Mill Units - ER-32 50/37 - Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures #11: GENOS L300, ESL-10 Model Lathes Reference Package #: GH IC Package End Face Mill Units ER-32 50/37 Collet Wrench Side Face Mill Units 145 ER-32 50/37 1,000 Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures 33

34 90 90 OFFSET UNIVERSAL Y-AXIS OFFSET 90 DISC GENOS L300 L-370 CAPTAIN LB-300 SERIES LU-300M LU-15M LB-15 SERIES ESL-10 MA-3.5 M M D MCU-2.5 GH GH GH GH KH KH ER-32 ER-32 ER-32 ER-25 ER-40 1 Arbor - 50/37 50/37 25/ / /59 6,000 6,000 6,000 2,000 MA-3.5 RI M RI GH GH ER-32 ER-32-50/37 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm OFFSET FRONT OFFSET BACK OFFSET DUAL OFFSET UNIVERSAL Y-AXIS OFFSET 90 DISC L-370MW LB-300MW LU-15MW MA-3.5 R MA-3.5 R MA-3.5 R 2U M M D MCU-2.5 GH GH GH GH GH GH KH KH ER-32 ER-32 ER-32 ER-32 ER-32 ER-25 ER-40 1 Arbor 50/37 50/37 50/37 50/37 50/37 25/ / /59 6,000 6,000 6,000 6,000 6,000 2,000 M RI GH ER-32 50/37 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 34

35 #12: LU-400M, LB-400M, L-470 CAPTAIN Lathes Reference Package #: GH End Face Mill Units ER-40 50/37 Collet Wrench Side Face Mill Units - ER-40 50/37 - Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures #13: LU-400M, LB-400M, L-470 CAPTAIN Lathes Reference Package #: GH IC Package End Face Mill Units ER-40 50/37 Collet Wrench Side Face Mill Units 145 ER-40 50/37 1,000 Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures 35

36 90 90 OFFSET UNIVERSAL Y-AXIS OFFSET 90 DISC L-470 CAPTAIN LB-400M LB-25 SERIES LU-400M LU-25M MA-4.5 M M D MCU-2.5 GH GH GH GH KH KH ER-40 ER-40 ER-40 ER-25 ER-40 1 Arbor - 50/37 50/37 25/ / /59 6,000 6,000 6,000 2,000 MA-4.5 RI M RI GH GH ER-40 ER-40-50/37 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm OFFSET FRONT OFFSET BACK OFFSET DUAL OFFSET UNIVERSAL Y-AXIS OFFSET 90 DISC L-470MW LB-400MW MA-3.5 R MA-3.5 R MA-3.5 R 2U M M D MCU-2.5 GH GH GH GH GH GH KH KH ER-32 ER-32 ER-32 ER-40 ER-40 ER-25 ER-25 3/4 Arbor 50/37 50/37 50/37 50/37 50/37 25/ / /29.5 6,000 6,000 6,000 6,000 6,000 2,500 M RI GH ER-25 16/11.8 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 36

90 90 OFFSET UNIVERSAL Y-AXIS OFFSET 90 DISC LU-35M LU-35IIM LB-35M LB-35IIM MA-4.5 M90-4.5 M90-4.5 D MCU-3.

4 50/37 80/59 6,000 6,000 6,000 2,000 MA-4.5 RI M90-4.

5-10mm ER-20/ER-20A = 0.5-13mm ER-25/ER-25A = 0.5-16mm ER-32 = 1-20mm ER-40 = 2-30mm 90 UNIVERSAL Y-AXIS OFFSET 90 DISC LU-45 LB-45 MA-5.0 M90-5.0 MCU-3.

37 90 90 OFFSET UNIVERSAL Y-AXIS OFFSET 90 DISC LU-35M LU-35IIM LB-35M LB-35IIM MA-4.5 M M D MCU-3.5 GH GH GH GH KH KH ER-40 ER-40 ER-40 ER-32 ER-40 1 Arbor - 50/37 50/37 25/ /37 80/59 6,000 6,000 6,000 2,000 MA-4.5 RI M RI GH GH ER-40 ER-40-50/37 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 90 UNIVERSAL Y-AXIS OFFSET 90 DISC LU-45 LB-45 MA-5.0 M MCU-3.5 GH GH GH KH KH ER-50 ER-50 ER-32 ER-40 1 Arbor - 100/74 25/ /37 120/88 6,000 6,000 2,000 MA-5.0 RI M RI GH GH ER-50 ER /74 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 37

38 #14: LT-200M Model Lathe Reference Package #: GH End Face Mill Units (Main) ER-25A* 16/11.8 Collet Wrench End Face Mill Units (Sub) - Internal Collet Wrench * ER-25A* 16/11.8 Side Face Mill Units - ER-25 16/ Package Includes: (2) End Face Mill Units (Main) (1) End Face Mill Unit (Sub) (2) Side Face Mill Units (1) Collet Wrench (1) Internal Collet Wrench* (2) Spindle Fixtures *Use the internal collet wrench with A-Series outputs 38

#15: LT-200M Model Lathe Reference Package #: GH-77118-00 IC Package End Face

8 Collet Wrench End Face Mill Units (Sub) 1,000 Internal Collet Wrench *

8 145 Package Includes: (2) End Face Mill Units (Main) (1) End Face Mill Unit

39 #15: LT-200M Model Lathe Reference Package #: GH IC Package End Face Mill Units (Main) ER-25A* 16/11.8 Collet Wrench End Face Mill Units (Sub) 1,000 Internal Collet Wrench * ER-25A* 16/11.8 Side Face Mill Units 1,000 ER-25 16/ Package Includes: (2) End Face Mill Units (Main) (1) End Face Mill Unit (Sub) (2) Side Face Mill Units (1) Collet Wrench (1) Internal Collet Wrench* (2) Spindle Fixtures *Use the internal collet wrench with A-Series outputs 39

40 90 MAIN SPINDLE 90 SUB SPINDLE UNIVERSAL Y-AXIS OFFSET 90 DISC LT-200MY LT-200M LT-10M MA-2.5 M M D MCU-1.5 GH GH GH GH KH KH ER-25 ER-25 ER-25 ER-16 ER-25A ¾ Arbor - 16/ / /7.4 16/ /29.5 6,000 6,000 6,000 2,500 MA-2.5 RI M RIC M D RI GH GH GH ER-25 ER-25 ER-25-16/ /11.8 6,000 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 40

41 #16: LT-300M Model Lathe Reference Package #: GH End Face Mill Units (Main) ER-32 50/37 Collet Wrench End Face Mill Units (Sub) - ER-32 50/37 Side Face Mill Units - ER-32 50/37 - Package Includes: (2) End Face Mill Units (Main) (1) End Face Mill Unit (Sub) (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures 41

42 #17: LT-300M Model Lathe Reference Package #: GH IC Package End Face Mill Units (Main) ER-32 50/37 Collet Wrench End Face Mill Units (Sub) 1,000 ER-32 50/37 Side Face Mill Units 1,000 ER-32 50/ Package Includes: (2) End Face Mill Units (Main) (1) End Face Mill Unit (Sub) (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures 42

43 90 MAIN SPINDLE 90 SUB SPINDLE UNIVERSAL Y-AXIS OFFSET 90 DISC LT-300MY LT-300M LT-15M MA-3.5 M M D MCU-1.5 GH GH GH GH KH KH ER-32 ER-32 ER-32 ER-16 ER-25 1 Arbor - 50/37 50/37 10/7.4 50/37 50/37 6,000 6,000 6,000 2,000 MA-3.5 RI M RI M D RI GH GH GH ER-32 ER-32 ER-32-50/37 50/37 6,000 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 90 MAIN SPINDLE 90 SUB SPINDLE UNIVERSAL Y-AXIS OFFSET 90 DISC LT-25M MA-4.5 M M D MCU-2.5 GH GH GH GH KH KH ER-40 ER-40 ER-40 ER-25 ER-25 1 Arbor - 50/37 50/37 20/15 50/37 80/59 6,000 6,000 6,000 2,000 MA-4.5 RI M RI M D RI GH GH GH ER-40 ER-40 ER-40-50/37 50/37 6,000 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 43

44 #18: LT-2000M Model Lathe Reference Package #: GH End Face Mill Units ER-25 45/33 Collet Wrench Side Face Mill Units - ER Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (1) Collet Wrench (2) Spindle Fixtures #19: LT-2000M Model Lathe (with internal coolant) Reference Package #: GH IC Package End Face Mill Units ER-25 50/37 Collet Wrench Side Face Mill Units 145 ER-25 50/ Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures 44

45 #20: LT-2000M/MY Model Lathe Reference Package #: GH Static Tool Package KH Tool Size 3/4 KH Tool Size 3/4 KH Tool Size 3/4 KH Tool Size 1 1/4 KH Tool Size 1 1/4 Package Includes: (2) KH (2) KH (1) KH (2) KH (4) KH (4) Plugs 45

46 OFFSET FRONT 90 DUAL OUTPUT UNIVERSAL LT-2000 M/MY/MYW LT-2000EX MA-2.5 R MA-2.5 M M U MCU-1.5 GH GH GH GH GH ER-25 ER-25 ER-25 ER-25/25 ER-16 45/33-45/33 45/33 10/7.4 6,000 6,000 6,000 MA-2.5 RI M RI GH GH ER-25 ER-25-45/33 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm OD-I-S ¾ OD-I-D ¾ OD MAIN/SUB OD-II ¾ FACE/ID MAIN/SUB BORING BAR 1¼ MAIN/SUB BORING BAR 1¼ CUT-OFF 26MM Lathe LT-2000 M/MY/MYW LT-2000EX KH KH KH KH Tool Size ¾ ¾ ¾ 26mm KH KH Tool Size 1¼ 1¼ 46

47 #21: LT-3000M/MY Model Lathe Reference Package #: GH End Face Mill Units ER-32 16/11.8 Collet Wrench Side Face Mill Units - ER-32 16/ Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures #22: LT-3000M/MY Model Lathe (with internal coolant) Reference Package #: GH IC Package End Face Mill Units ER-32 16/11.8 Collet Wrench Side Face Mill Units 1000 ER-32 16/ Package Includes: (2) End Face Mill Units (2) Side Face Mill Units (2) Wrenches (2) Spindle Fixtures 47

48 #23: LT-3000M/MY Reference Package #: GH Static Tool Package KH Tool Size 1 KH Tool Size 1 KH Tool Size 1 KH Tool Size 1 1/2 KH Tool Size 1 1/2 Package Includes: (2) KH (2) KH (1) KH (2) KH (4) KH (4) Plugs 48

49 90 UNIVERSAL LT-3000 M/MY/MYW LT-2000EX MA-3.5 M MCU-1.5 GH GH GH ER-32 ER-32 ER-16-45/33 10/7.4 6,000 MA-3.5 RI M RI GH GH ER-32 ER-32-45/33 Straight Tools = 10 Bar/145 PSI 90 Tools = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm OD-I-S 1 OD-I-D 1 OD MAIN/SUB OD-II 1 FACE/ID MAIN/SUB BORING BAR 1½ MAIN/SUB BORING BAR 1½ CUT-OFF 32MM Lathe LT-3000 M/MY KH KH KH KH Tool Size mm KH KH Tool Size 1½ 1½ 49

90 DUAL OUTPUT 90 BMT-55 SL-20MC GH-44941-00 GH-44943-00 GH-44945-00 ER-25 ER-25 ER-25-25.1/18.

50 90 DUAL OUTPUT 90 BMT-55 SL-20MC GH GH GH ER-25 ER-25 ER / /18.5 6,000 GH GH ER-25 ER /18.5 = 70 Bar/1050 PSI RPM = Maximum 90 DUAL OUTPUT 90 ADJUSTABLE 90 BMT-65 SL-25AMC SL-25ASY SL-25BMC/500 SL-25BMC/1000 SL-25BMC/1500 SL-35BMC/1500 GH GH GH GH ER-32 ER-32 ER-32 ER-25-45/ / /33.2 6,000 6,000 GH GH ER-32 ER-32-45/33.2 = 70 Bar/1050 PSI RPM = Maximum 50

51 90 DUAL OUTPUT 90 BMT-75 SL-45MC/2200 SL-45MC/2200BB SL-45MC/3000 SL-45MC/3000BB GH GH GH ER-40 ER-40 ER-40-50/37 50/37 6,000 GH GH ER-40 ER-40-50/37 = 70 Bar/1050 PSI RPM = Maximum 90 BMT-85 SL-65MC/3200 GH GH ER-50 ER /74 GH GH ER-50 ER /74 = 70 Bar/1050 PSI RPM = Maximum 51

52 20 Thompson Rd East Windsor CT Fax ROTARY TABLES ANGLE HEADS LIVE SWISS TOOL PRESETTERS Live Complete /27/16

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 LIVE 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com STRAIGHT 90 DUAL OUTPUT