MORI SEIKI DURATURN SERIES NL SERIES NT SERIES NZ SERIES ROTARY TOOLS
|
|
- Irene Annabelle Harvey
- 5 years ago
- Views:
Transcription
1 DURATURN SERIES NL SERIES NT SERIES NZ SERIES ROTARY TOOLS
2 ROTARY TOOLS MORI SEIKI DURATURN (12-STATION TURRET) NL (20-STATION TURRET) NT SERIES (12-STATION TURRET) NZ (16-STATION TURRET) STRAIGHT (OD) DT OD 1:1 ER $2, DT OD 1:1 ER PSI $3, DT OD 1:1 ER $2, DT OD 1:1 ER PSI $3, DT OD 1:1 ER $2, DT OD 1:1 ER PSI $3, Page 1
3 DURATURN (12-STATION TURRET) NL (20-STATION TURRET) NT SERIES (12-STATION TURRET) NZ (16-STATION TURRET) ROTARY TOOLS RIGHT-ANGLE (FACE) DT Face 1:1 ER $3, DT Face 1:1 ER PSI $4, DT Face 1:1 ER $3, DT Face 1:1 ER PSI $4, DT Face 1:1 ER $3, DT Face 1:1 ER PSI $4, DT Face 1:2 ER $5, DT Face 1:2 ER PSI $6, DT Face 1:2 ER $5, DT Face 1:2 ER PSI $6, DT Face 2:1 ER $5, DT Face 2:1 ER PSI $6, DT Face 2:1 ER $5, DT Face 2:1 ER PSI $6, Page 2
4 ROTARY TOOLS MORI SEIKI DURATURN (12-STATION TURRET) NL (20-STATION TURRET) NT SERIES (12-STATION TURRET) NZ (16-STATION TURRET) RIGHT-ANGLE DUAL-HEAD (FACE) DT Face-Both 1:1 ER $5, DT Face-Both 1:1 ER PSI $6, DT Face-Both 1:1 ER $5, DT Face-Both 1:1 ER PSI $6, Page 3
5 DURATURN (12-STATION TURRET) NL (20-STATION TURRET) NT SERIES (12-STATION TURRET) NZ (16-STATION TURRET) ROTARY TOOLS STRAIGHT-OFFSET (OD) DT OD-Offset 1:1 ER $4, DT OD-Offset 1:1 ER PSI $5, DT OD-Offset 1:1 ER $4, DT OD-Offset 1:1 ER PSI $5, DT OD-Offset 1:2 ER $6, DT OD-Offset 1:2 ER PSI $7, DT OD-Offset 2:1 ER $6, DT OD-Offset 2:1 ER PSI $7, Page 4
6 ROTARY TOOLS MORI SEIKI NL (10 & 12-STATION TURRETS) NT SERIES (10 & 12-STATION TURRETS) STRAIGHT (OD) DT OD 1:1 ER $2, DT OD 1:1 ER PSI $3, DT OD 1:1 ER $2, DT OD 1:1 ER PSI $3, DT OD 1:1 KM $4, DT OD 1:1 KM PSI $5, DT OD 1:1 KM $5, DT OD 1:1 KM PSI $6, Page 5
7 ROTARY TOOLS NL (10 & 12-STATION TURRETS) NT SERIES (10 & 12-STATION TURRETS) RIGHT-ANGLE (FACE) DT Face 1:1 ER $3, DT Face 1:1 ER PSI $4, DT Face 1:1 ER $3, DT Face 1:1 ER PSI $4, DT Face 1:1 KM $5, DT Face 1:1 KM PSI $6, DT Face 1:2 ER $5, DT Face 1:2 ER PSI $6, DT Face 1:2 ER $5, DT Face 1:2 ER PSI $6, DT Face 1:2 KM $7, DT Face 1:2 KM PSI $8, DT Face 2:1 ER $5, DT Face 2:1 ER PSI $6, DT Face 2:1 ER $5, DT Face 2:1 ER PSI $6, DT Face 2:1 KM $7, DT Face 2:1 KM PSI $8, Page 6
8 ROTARY TOOLS MORI SEIKI NL (10 & 12-STATION TURRETS) NT SERIES (10 & 12-STATION TURRETS) RIGHT-ANGLE DUAL-HEAD (FACE) DT Face-Both 1:1 ER $5, DT Face-Both 1:1 ER PSI $6, DT Face-Both 1:1 ER $5, DT Face-Both 1:1 ER PSI $6, DT Face-Both 1:1 KM $8, DT Face-Both 1:1 KM PSI $9, DT Face-Both 1:2 ER $6, DT Face-Both 1:2 ER PSI $8, DT Face-Both 1:2 KM $9, DT Face-Both 1:2 KM PSI $11, Page 7
9 ROTARY TOOLS NL (10 & 12-STATION TURRETS) NT SERIES (10 & 12-STATION TURRETS) STRAIGHT-OFFSET (OD) DT OD-Offset 1:1 ER $4, DT OD-Offset 1:1 ER PSI $5, DT OD-Offset 1:1 ER $4, DT OD-Offset 1:1 ER PSI $5, DT OD-Offset 1:1 KM $6, DT OD-Offset 1:1 KM PSI $7, DT OD-Offset 1:2 ER $6, DT OD-Offset 1:2 ER PSI $7, DT OD-Offset 2:1 ER $6, DT OD-Offset 2:1 ER PSI $7, DT OD-Offset 2:1 ER $6, DT OD-Offset 2:1 ER PSI $7, Page 8
10 ROTARY TOOLS MORI SEIKI NL (10 & 12-STATION TURRETS) NT SERIES (10 & 12-STATION TURRETS) STRAIGHT-OFFSET REVERSE (OD) DT OD-Offset Back 1:1 ER $4, DT OD-Offset Back 1:1 KM $6, Page 9
11 DURATURN SERIES NL SERIES NT SERIES NZ SERIES ROTARY TOOLS SPECIALS Page 10
12 DURATURN SERIES NL SERIES NT SERIES NZ SERIES Why do over 94% of our test programs result in customer purchases...? Designed, manufactured actured and supported in the USA for a Mori Seiki customer by a Mori Seiki customer. Your only supplier with over 60 years of gear and bearing expertise combined with over 30 years of hydraulic expertise. All tools are designed to each specifi c machine as to not limit your equipment s e capabilities. Maximum use of each machine s turret cone for larger diameter er duplex bearings set around the clamping system without t interference eren ence to neighboring tools. Recessed spindle confi onfigu gurations reduces the length of moment arm for longer bearing life while maximizing tool lengths. Internal and External combination ion coolant options. High pressure internal coolant options up to 500PSI and 1,5000 PSI. Quality high precision spindle bearings (ABEC 7 / P4 minimum) imum are used for performance, rigidity and durability for smooth operation and long life giving the assurance ance of solid performance. Highest quality seals and o-rings for protection against external contamination. Long-life premium grease for optimum lubrication environment. nmen Bodies are made of high quality steels with a one piece base for maximum rigidity and wear resistance. stan Black oxide coated and/or melonited for a professional onal finish. Hardened ed and honed right-angle spiral bevel and spur cut gears provide for long life, high strength and quiet operation. Industry proven ER Tooling System for reliable le and controlled machining. Wrenches Included! All tools o are packaged with specifi cation sheets, operating instructions and audit-test reports. Kennametal Modular Quick-Change Tooling System for reliable le and effi cient tool changes. 48 Hour Service on repairs! We have even done them in less than one hour. We understand your urgency as we are a customer too!
Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12
1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested
More informationNAKAMURA TOME LIVE TOOLING
NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000
More informationLNS America 4621 East Tech Drive Cincinnati, Ohio Steady Rest Applications Designed With Quality Expertise. Automatic Work Support Systems
Automatic Work Support Systems www.lns-america.com Steady Rest Applications Designed With Quality Expertise We ve combined the industry s best-selling automatic steady rest with LNS America s unparalleled
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
LIVE 77 Includes Tools 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Lathe Tooling
More informationANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
More informationApril 2017 TOOLING FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe
More informationStatic & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form
More informationJuly 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationApril 2017 TOOLING FOR MULTUS U3000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 MULTUS U3000/U4000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
LIVE 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com STRAIGHT 90 DUAL OUTPUT
More informationHIGH TORQUE LIVE TOOLS
HIGH TORQUE LIVE TOOLS Mori Seiki NLX 4000 High Torque Live Tools Fax: (847) 367-4815 Email: inquiries@lyndexnikken.com Fill in the form below and fax it to (847) 367-4815, or visit www.lyndexnikken.com
More informationAlberti LIVE TOOLS DOOSAN MACHINE TOOLS AMERICA
55 21.65 1 47 c te ca Me 40 77 LIVE DOOSAN 12 80 54 N 9b DI 8/ O 0x1 CC x3 TA 0.8 AT 6x 16 W1 67 55 18 4 11 7 MACHINE AMERICA 20 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com
More informationOMG NorthAmerica. The synthesis...
Series VH Series MO Series BAH Series TA OMG NorthAmerica The synthesis... SERIES BAH Extensions and Angle Heads SERIES HT Revolving heads SERIES TA-TAV-TAF-TAO Angle heads SERIES MO High precision spindle
More informationWe do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»
» Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting
More informationWhat is HSK-T? HSK T. Feature. Compatible with HSK-A. Increased cutting accuracy at turning process. Compatible
What is HSK-T? HSK-T interface was developed to maximize cutting ability of multi-tasking machines. HSK-T interface became ISO standard (ISO121 164-3:2008) in 2008. Feature Compatible with HSK-A HSK-T
More information...components in motion. Miniature Linear Guideways
...components in motion Miniature Linear Introduction Miniature linear guideway systems are widely used throughout industry for precise, compact applications. Precise and Stainless The gothic arch shape
More informationHES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
More informationOilfield Chain 7F
Oilfield Chain 7F-0008 www.renoldjeffrey.com 2 I Renold Oilfield Chain Renold Oilfield Chain Unique quality and safety Consistent reliability Renold's 100+ years of experience in the design and manufacture
More informationBMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
More informationTG Series Gyratory Crusher. Highly Effective Crushing Solution.
TG Series Gyratory Crusher Highly Effective Crushing Solution www.trioproducts.com TRIO strives to provide the most rugged, robust, and reliable equipment for the most demanding environments. TRIO provides
More informationJuly 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationAlberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30
350 5 TURBODRILL/TURBOFLEX 139 79 53 11 184 0 10 Ø25 Ø80 86 ER40 3/30 131 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com TURBODRILL &
More informationAugust 2018 ONLY FOR MULTUS U3000/U4000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA August 2018 MULTUS U3000/U4000/U5000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the
More informationTRUCK-MOUNTED CONCRETE PUMPS S 58 SX / S 61 SX
TRUCK-MOUNTED CONCRETE PUMPS S 58 SX / S 61 SX SCHWING TRUCK-MOUNTED CONCRETE PUMPS S 58 SX / S 61 SX LONG REACH BOOMS WITH HIGH END TECHNOLOGY SCHWING s S 58 SX and S 61 SX truck-mounted concrete pumps
More informationCommercial Marine. MTU Generator Sets. Power. Passion. Partnership.
Commercial Marine MTU Generator Sets Power. Passion. Partnership. MTU Generator Sets MTU. Generating power. MTU offers the complete genset portfolio for commercial applications from 5 to 3000 kwe, available
More informationTechnical Features. 20 Thompson Rd East Windsor CT Fax
Technical Features 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com THE TSUDAKOMA DUAL LEAD GEARING SYSTEM THE TSUDAKOMA DUAL LEAD GEARING
More informationTRUCK-MOUNTED CONCRETE PUMPS S 46 SX / S 47 SX
TRUCK-MOUNTED CONCRETE PUMPS S 4 SX / S 47 SX SCHWING TRUCK-MOUNTED CONCRETE PUMPS S 4 SX - S 47 SX THE LONG REACH CONCRETE PUMPS WITH UNLIMITED POSSIBILITIES With the S 4 X and S 47 SX truck-mounted concrete
More informationUSE AND INSTALLATION HANDBOOK FOR. Belt Driven Spindles Cheyenne Ave, Grafton, WI
USE AND INSTALLATION HANDBOOK FOR Belt Driven Spindles 262.377.2434 1230 Cheyenne Ave, Grafton, WI www.gilmanprecision.com TABLE OF CONTENTS RUN-IN PROCEDURE... 3 TOOLING CAPACITIES.... 4-7 TORQUE & BORING
More informationNSK Product Lineup for Machine Tools
NSK Product Lineup for Machine Tools We have two general catalogs on Super Precision and Precision Machine Components available, which contain detailed information related to our bearings and linear products.
More informationPipe End Preparation Machines EP 424. Machines perfect preps from OD DN (4" - 24"). Hydraulic, Electric or Pneumatic drive options.
Machines perfect preps from OD DN 100-600 (4" - 24"). EP 424 application. Auto feed angle generator by "SpeedPrep". Hydraulic, Electric or Pneumatic drive options. Compact flange facer. 33 Pipe End Preparation
More informationJuly 2018 ONLY FOR LU3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LU3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationTandler. ServoFoxx Servo Gearheads
Tandler ServoFoxx Servo Gearheads ServoFoxx Inline and Right Angle Planetary Servo Gearheads The Tandler ServoFoxx series of servo gearheads provide the ultimate in precision motion control for highly
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationANGLE HEADS. Productivity Solutions.
ANGLE HEADS Productivity Solutions www.kuvamtechnologies.com Kuvam s Phylosophy: We at Kuvam Technologies believe in win~win~win relationship i.e. Win for the customer, Win for the team and Win for the
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationWe set the standard for the highest precision and most advanced technology in the machine tool accessory market
ANGLE HEADS heimatec GmbH-Renchen, Germany Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility, on 7.5 acres, is home to over 100
More informationEnviroAire T/TVS Series
EnviroAire T/TVS Series 75kW 160kW Oil-Free Rotary Screw Compressors Fixed & Variable Speed ILFREE 2 Gardner Denver Choose oil-free and eliminate the risk Eliminate the Risk For many industries air purity
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationSchindler 7000 High-rise Elevators The journey to the top
The journey to the top Schindler Passenger Elevators The journey begins 2 3 4 from outline to skyline 5 through an exciting new design world 6 7 8 where freedom of imagination 9 creates the extraordinary.
More informationMOBILAIR M 114. Portable Compressors With the world-renowned SIGMA PROFILE Flow rate 7.5 to 9.7 m³/min ( cfm)
MOBILAIR M 114 Portable Compressors With the world-renowned SIGMA PROFILE Flow rate 7.5 to 9.7 m³/min (265 345 cfm) www.kaeser.com MOBILAIR M 114 The powerful combination of the highly efficient KAESER
More informationThe original quick jaw change power chuck. High repeatability when changing jaws
Fast changeover, fast payback: The original quick jaw change power chuck KNCS N Easy lubrication even on vertical machines with 3 radial builtin grease fittings Minimal setup times Jaw change in less than
More informationJuly 2017 TOOLING FOR GENOS L300/L3000 BMT. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR July 2017 GENOS L300/L3000 BMT www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
Alberti LIVE TOOLS 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Alberti
More informationDOOSAN LIVE & STATIC TOOLING
DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800
More informationHG-F. Quick jaw change ma JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
Quick jaw change ma JAWS SYSTEM FORKARDT For highest speeds Flat gripping force curve 18 16 315 Mdmax. Jaw change in less than 1 minute F G total gripping force (3 jaws) (kn) 14 12 1 8 6 4 2 26 21 16 26
More informationEDISON DV VARIABLE SPEED DIRECT DRIVEN SCREW COMPRESSORS NEWTON DIRECT DRIVEN SCREW COMPRESSORS. from 45 up to 315 kw from 7.
EDISON DV VARIABLE SPEED DIRECT DRIVEN SCREW COMPRESSORS NEWTON DIRECT DRIVEN SCREW COMPRESSORS from 45 up to 315 kw from 7.5 up to bar EDISON DV Variable speed direct driven lubricated rotary screw compressors
More informationOctober 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR October 2017 LB2000/LB3000 M/MY/MYW www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
More informationFOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO
FOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO DELO DELIVERS CONFIDENCE TABLE OF CONTENTS Introduction 3 Engine Oils 4-5 Transmission Fluids 6 Gear Lubricants 7 Greases 8 Coolant/Antifreeze
More informationProduct brochure. MagnaGear XTR gear reducers
Product brochure MagnaGear XTR gear reducers Subhead With expertise, and a comprehensive portfolio of products and life-cycle services, we help value-minded industrial customers improve their energy efficiency
More informationDETROIT DD15 ENGINE Horsepower. lb-ft Torque. Liters FROM DISPLACEMENT FROM
DETROIT DD15 ENGINE FROM 400-505 Horsepower FROM DISPLACEMENT lb-ft Torque Liters 1550-1750 14.8 EFFICIENCY HAS EVOLVED THE DETROIT DD15 ENGINE DEVELOPED SPECIFICALLY FOR OPTIMUM FUEL ECONOMY The focus
More informationSERIES 36-AM & BD...4-5 SERIES 36-AM-RA & BD RA...6-7 SERIES 50-AM & BD...8-9 SERIES 36 TOOL CHANGER...10-11 SERIES 50-TOOL CHANGER...12-13 SERVO MOTOR ADAPTERS...14-15...16-17...18-19 COLLET NUT...19
More informationConstant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM <1.4HP / 1.04kW
Constant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM
More informationScrew Compressors CPF and CPVS People. Passion. Performance.
Screw Compressors CPF 175-340 and CPVS 175-250 People. Passion. Performance. People. Passion. Performance. Define your needs, our broad For Chicago Pneumatic, it isn t just about products. We value our
More informationRotary Blowers Omega Series Air delivery from 0.5 to 160 m³/min Pressure up to 1000 mbar, vacuum to -500 mbar
www.kaeser.com Rotary Blowers Omega Series Air delivery from 0.5 to 160 m³/min Pressure up to 1000, vacuum to -500 KAESER Rotary Blowers Efficient and Durable Renowned throughout the world for their efficiency
More informationTOOLING KITS. July 2018 INCLUDES OKUMA TOOLING COMMONALITY CHARTS!
INCLUDES OKUMA TOOLING COMMONALITY CHARTS! July 08 TOOLING KITS www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty VELOCITY TOOLING KITS Velocity Tooling:
More informationHG-F JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
SYSTEM FORKARDT JAWS Quick jaw change ma For highest speeds Flat gripping force curve 18 315 16 Mdmax. FG Jaw change in less than 1 minute FG total gripping force (3 jaws) (kn) 14 26 12 1 8 21 6 16 4 2
More informationLow lifters. models. support 24/7. worldwide network PLL PLE PMR PLP ERGO ALL/XLL MDW MDE
Low lifters 8 models worldwide network 24/7 support PLL PLE PMR PLP ERGO ALL/XLL MDW MDE A family of low lifter trucks for High demands on productivity UniCarriers designs, manufactures and supports the
More informationBMT 65 TOOLING BENZTOOLING.COM
BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s
More informationDURASPRING. DURASPRING Spiral Springs
DURASPRING are commonly used for the durable protection of ballscrews and shafts. are produced using spring steel. The steel strip is roll formed to produce the spiral spring. The advantages of DURASPRING
More informationFSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER
FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER 1 CONTROL PANEL F S G - 2 0 / 2 4 COLUMN TYPE HIGH PRECISION 3-AX 1. Control power supply switches
More informationGENERAL SPECIFICATION
GENERAL SPECIFICATION Description FSG-2040ADII FSG-2060ADII FSG-2440ADII FSG-2460ADII FSG-2480DII Table Size 19 5/8 x393/8 (500x1000mm) 19 5/8 x59 (500x1500mm) 24 x39 3/8 (610x1000mm) 24 x59" (610x1500mm)
More informationMICHIGAN PNEUMATIC TOOL
MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders
More informationMILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models
Since 1977 MILLING MACHINES A wide range of models to select from light to heavy duty models SHIAN RONG JING JI CO., LTD. No. 95, Ln. 61, Dafu Rd., Shengang Dist.,Taichung City 429, Taiwan. TEL: 886-4-2523
More informationSanders, Buffers & Polishers Introduction
Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc
More informationInnovative Reliability for Mobile Power Applications
COMMERCIAL MOBILE GENERATORS Innovative Reliability for Mobile Power Applications Cummins Onan Commercial Mobile Generators The Cummins Onan mission is simple: Design and create the best, most innovative
More informationMulti-directional reach truck UFW
Multi-directional reach truck UFW 24/7 support worldwide network reach trucks UFW Multi-directional reach truck UFW 200/250 Maximum flexibility The new UFW is fl exible and effi cient with long goods and
More informationHighest Performance: SPH Series
Highest Performance: Series The series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special attention
More informationDISC MOWERS Pull-type Mounted and Pull-type
DISC MOWERS Pull-type Mounted and Pull-type Mounted For those who demand more Every day, you demand more. More from the land. More from yourself. More from your equipment. So case ih delivers more. More
More informationALUMINIUM GEAR UNITS WITH SMOOTH MOTORS kw
Intelligent Drivesystems, Worldwide Services ALUMINIUM GEAR UNITS WITH SMOOTH MOTORS 0.12 1.1 kw EN PRODUCT CATALOGUE TI60-0002 THE ADVANTAGES OF ALUMINIUM GEAR UNITS Information Corrosion Resistant Aluminium
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationPRODUCT OVERVIEW HIGHEST PRECISION
PRODUCT OVERVIEW If you need high precision gear reducers at a reasonable cost and you value innovation and excellent service, take a close look at our product line. You ll find a wide range of products
More informationElJay Screens. Innovative Oval Stoke Action. ElJay TRIPLE SHAFT SCREENS
ElJay Screens Innovative Oval Stoke Action ElJay TRIPLE SHAFT SCREENS In today's competitive environment, it's good to have high quality equipment. It's even better to know that your equipment is backed
More informationITEM ENGINEERING CO.,LTD.
ITEM ENGINEERING CO.,LTD. ITEM ENGINEERING is the specialist supplier of valves, actuators and controls in the K C MAHANAKORN Group, who are the authorized distributor of BRAY, FLOW-TEK and RITE. The key
More informationQuotation. DonutKing. Depositor
DonutKing Quotation The DonutKing provides maximum efficiency and flexibility in producing a complete line of cake donuts with one machine. Industrial design, washdown duty and stainless steel construction
More informationCONTENTS. Speciality Tapered Products
CONTENTS Products Features / Benefi ts Type C............................................................ B7-2 Special Duty, Hinged Cap............................................... B7-3 All Steel............................................................
More informationCandy Coup-Link OVER YEARS OF INNOVATION
Candy Coup-Link Zero-backlash, flexible-shaft couplings High torque, excellent response Accommodates misalignment and shaft endplay Aluminum and stainless steel options Inch and metric bores available
More informationTechnical Data B20x. 8 BiRotor, APL. Model B201 [8 ] Model B203 [8 ] Model B204 [8 ] Model B205 [8 ]
Technical Data BiRotor, APL Model B201 [] Model B203 [] Model B204 [] Model B205 [] General The BiRotor Meter is a positive displacement meter utilized in the most demanding applications requiring accuracy,
More informationRME 110 RME 110 IVR RMF RMF IVR. Robust, reliable, efficient. Maximum benefits in compressed air.
RME 110 RME 110 IVR RMF 110-160 RMF 132-180 IVR Gearbox driven Oil-injected screw compressors Fixed and variable speed Robust, reliable, efficient. Maximum benefits in compressed air. Time-proven reliability
More informationJH Process Equipment Inc. 617 Jeffers Circle, Exton, PA
Progressing Cavity Pumps Setting the Standard for Premium Quality Products If you re pumping viscous, abrasive, shear sensitive, or solids-containing materials... If your process involves extremely thick
More informationVARIABLE SPEED ELECTRIC CHAIN MOTOR
VARIABLE SPEED ELECTRIC CHAIN MOTOR COLUMBUS McKINNON CORPORATION PRECISION CONTROL WITH FAST LIFTING SPEEDS Whether you need to quickly change out a set during a performance or remove heavy equipment
More informationGlobe Valve Retrofits
Globe Valve Retrofits Contents How to Select the Globe Valve Retrofit Solution... pg 33 Globe Valve Retrofit Actuators... pg 34 Solutions for Specific Manufacturer and Part Number Honeywell... pg 37 Johnson
More informationActuator. Series K. Heytec Antriebstechnik GmbH Heidemannstraße München
Actuator Series K Heytec Antriebstechnik GmbH Heidemannstraße 3 80939 München Phone: 089 / 31 21 35 0 Fax: 089 / 3 13 25 26 Email: info@heytec.de Internet: www.heytec.de Issue 07/2017 Table of contents
More informationPower Chucks B & BT Series
Power Chucks B & BT Series B Series Three-jaw and two-jaw wedge style power chucks are ideal for high speed chucking, bar chucking and universal machining. These deliver consistent accuracy and repetitive
More informationFixed Displacement Gear Pumps
Fixed Displacement Gear Pumps D/H/HD Series Introduction Series D/H/HD Features Pressure-loaded design Efficient, simple design - few moving parts Exceptionally compact and lightweight for their capacity
More informationAdvanced Artillery For Enhanced Tubes
Advanced Artillery For Enhanced Tubes BRUSHES DESIGNED TO CLEAN THE INTERNAL LANDS & GROOVES Brushes for internally enhanced tubes Available in Bags of 25 Tube O.D., I.D., & Gauge (B.W.G.) A Tube O.D.
More informationG.W. Lisk Company, Inc. control. Valves and Solenoids. Components for Fuel, Emissions, Power Generation and Pneumatic/Hydralic Systems
control Valves and Solenoids Components for Fuel, Emissions, Power Generation and Pneumatic/Hydralic Systems G.W. LISK COMPANY G.W. LISK: Innovation. Precision. Performance. Quality. For over 50 years,
More informationDRILL JUMiBOS Excellent Service from the Start.
DRILL JUMiBOS MINING Mining Doesn't Stop. And neither can your drills. Oldenburg Mining drills combine smart design with rugged construction to ensure optimum uptime, maximizing your production and lowering
More informationOPERATION & SPARE PARTS MANUAL
P a g e 1 OPERATION & SPARE PARTS MANUAL BACKDRIVE ALIGNMENT KIT (0111/110006) ISSUE 2 JULY 2015 Any alterations or modifications to this equipment or the use of after-market spare parts, without the express
More informationANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationQA4 / QA6 / QA8 Series Precision Air Nutrunners
QA4 / QA6 / QA8 Series Precision Air Nutrunners Because every assembly is critical There s much more to an assembly application than merely putting wrench to bolt. It s an intricate matter of linking tool
More informationSteel Suction Line Accumulators
"U" Tube Style Accumulators The Parker U tube accumulator design is a result of extensive laboratory testing plus detailed investigation of the various accumulators currently available. It takes into account
More informationTechnical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
More informationENCLOSED TRACK CONVEYORS. Unibilt. OVERHEAD and INVERTED
ENCLOSED TRACK CONVEYORS Unibilt OVERHEAD and INVERTED Jervis B. Webb Company introduced the fi rst power & free conveyor in 1939 to address the unique concerns of automotive operations. But with each
More informationWorkshop Compressors PREMIUM Series.
Workshop Compressors PREMIUM Series www.kaeser.com What do you expect from your PREMIUM workshop compressor? The quality and effi ciency of technical work depends greatly on the tools and machinery used.
More informationGlobe Valve Retrofits
Globe Retrofits Contents How to Select the Globe Retrofit Solution... pg 33 Globe Retrofit Actuators... pg 34 Solutions for Specific Manufacturer and Part Number Honeywell... pg 37 Johnson Controls...
More informationMULTITURRET BAR TURNING B436Y2
MULTITURRET BAR TURNING B436Y2 B436Y2 The range of QUATTRO machines have been produced by Biglia since 1990 and celebrating the third generation is now further enhanced by the B436Y2 model. This new model
More informationPerformance Plus: Spiral Bevel Series
Performance Plus: Spiral Bevel Series GAM Perfomance Plus Miniature Spiral Bevel Gearboxes The VP Series Performance Plus Miniature Bevel Gearboxes pack high performance in a small package with the highest
More information