October 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

Size: px
Start display at page:

Download "October 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty"

Transcription

1 TOOLING FOR October 2017 LB2000/LB3000 M/MY/MYW A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty

2 Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe tooling for OKUMA in North America. Velocity/SU-matic tooling is designed and manufactured by SU-matic a worldwide leader in tooling technology headquartered in Switzerland. SU-matic works closely with engineers from OKUMA America, OKUMA Japan, and OKUMA Europe when designing new tools. This engineering collaboration OKUMA lathes, multitasking machines, and machining centers. SU-matic has several OKUMA machine tools in their manufacturing facility. Velocity/SU-matic is the OEM supplier of static tooling startup kits for OKUMA lathes. Velocity/SU-matic tooling is available only for Velocity Tooling Technology Velocity/SU-matic tools are CMM inspected and serialized records are tools use individually ground spacer rings to set the bearing preload. Velocity tools are delivered ready to use; all live tools are run-in at the factory and internal coolant tools are pressure tested Velocity tools are greased for life; no customer maintenance is required. Two Year Warranty Velocity/SU-matic Tooling is designed to give years of service under the most demanding applications. The build quality of our tool holders allows us to back them with a Two Year Factory Warranty. Velocity will repair any defective tool holder for a period of two years from the date of purchase.

3 Contents VELOCITY TOOL MATRIX ORDER FORM 3 LB2000 TOOLING KITS 7 LB3000 TOOLING KITS 8 CROSS (RADIAL) TOOLS 9 FACE (AXIAL) TOOLS 11 ADJUSTABLE ANGLE TOOL GEAR HOBBING TOOL 14 BORING BAR HOLDERS 15 OD-I HOLDERS 19 OD-II HOLDERS 21 CUT-OFF BLADE HOLDERS 22 CAPTO OUTPUT LIVE TOOLS 23 CAPTO OUTPUT STATIC TOOLS 24

4 Tool Matrix Company Contact Address City, State, Zip Phone/Fax # Tool Description LB2000/3000 M Turrets Face Tool Cross Tool Dealer Location Turret Plugs Machine Part # Quantity LB2000 LB Cross Tools Tool Type Quantity Page Coolant (PSI) Output (Nm) Maximum Cross ( ) ( ) 9 External ER-32 1:1 60 6,000 9 IC (1,000) ERC-32 1:1 60 6,000 Offset Cross External ERAX-25 1:1 40 6, IC (1,000) ERAXC-25 1:1 40 6,000 Offset Cross Dual External (2) ERAX-25 1:1 40 6,000 Cross Dual External (2) ERAX-20 1:1 40 6,000 Offset Cross Quad External (4) ERAX-16 1:1 40 6,000 3

5 Tool Matrix Face Face Tools Adjustable Angle Tools Gear Hobbing Tools Tool Type Quantity Page ( ) ( ) Coolant (PSI) Output (Nm) Maximum 11 External ER-32 1:1 60 6, IC (1,450) ERC-32 1:1 60 6,000 Main Sub Face ( ) 12 External (2) ER-32 1:1 60 6,000 High Speed Face External ER-20 1: , IC (1,450) ERC-20 1: ,000 Dual MY Face External (2) ER-25 1:1 25 6,000 Dual MYW Face External (4) ER-25 1:1 25 6,000 Adj External ERAX-20 1:1 15 6,000 Hobber External 3/4" Arbor 2:1 50 3,000 4

6 Tool Matrix Boring Bar Holders Holder Type Holder Style Quantity Page Bar Size (Inches) (sub/main) Coolant LB Yes IC & EXT LB Yes IC & EXT LB3000 Full Depth IC & EXT Boring Bar Holders LB3000 Full Depth LB3000 MYW LB3000 MYW LB3000 Quad LB3000 Dual IC & EXT / 1.5 Yes IC & EXT / 1.5 Yes IC & EXT (4) 1.0 No IC & EXT (2) IC & EXT OD-I Turning Holders Holder Type Holder Style LB2000 OD-I LB-3000 OD-I LB3000 OD-I-S LB2000 MY LB3000 MY LB3000 MYW OD-I Length Turning Holders Quantity Page Stick Size (Inches) (sub/main) Coolant Yes External Yes External Yes External Yes External Yes External 5

7 Tool Matrix OD-II Turning Holders Cut-Off Holders Cross Face Holder Type Holder Style LB2000 OD-II LB3000 OD-II LB3000 OD-II-S Quantity Page Stick Size (Inches) (sub/main) Coolant Yes External Yes External Yes External Blade Holder Blade Holder (Double) Blade Holder (Extended) Live Tools Tool Type Quantity Page ( ) Coolant (PSI) IC (1,000) IC (1,000) IC (1,450) Output 32mm Blade 32mm Blade 32mm Blade Yes Yes Yes (Nm) External External External Maximum C4 1:1 60 6,000 C5 1:1 60 6,000 C4 1:1 60 6,000 Holder Type Holder Style Static Tools Quantity Page Output (sub/main) Coolant OD-I C4 No IC & EXT OD-I OD-I Y-Axis (2) C4 No IC & EXT OD-I Main/Sub (2) C4 Yes IC & EXT Boring Bars ID C4 Yes IC & EXT ID Main/Sub (2) C4 Yes IC & EXT 6

8 LB2000 Tooling Kits Tool Type Tool Size Velocity # OD-I.75" LB9/ V2 ID 1.25" LB9/ Description Static Kit Description Static Tooling Kits Live Tooling Kits Turret L Turret / Type M / MY MW External Internal Tool Type Coolant Coolant Part # OAC KUP Tool Size Part # OAC KUP KUP KUP KUP Velocity # Part # Velocity Part# Velocity OD-I.75" OD-II.75" ID 1.25" OD-I-S.75" Main/Sub OD-II-S.75" Main/Sub ID 1.25" Main/Sub Turret Plug Cross Tool ER Face Tool ER Cross Tool (IC) ERC Face Tool (IC) ERC

9 LB3000 Tooling Kits Tool Type Tool Size Velocity # OD-I 1" ID 1.5" Description Static Kit Description Static Tooling Kits Live Tooling Kits Turret L Turret / Type M / MY MYW External Internal Tool Type Coolant Coolant Part # OAC KUP Tool Size Part # OAC KUP KUP KUP KUP Velocity # Part# Velocity Part# Velocity OD-I 1" OD-II 1" ID 1.5" OD-I-S 1" Main/Sub OD-II-S 1" Main/Sub ID 1.5"/1" Main/Sub Turret Plug Cross Tool ER Face Tool ER Cross Tool (IC) ERC Face Tool (IC) ERC

10 Live Tools es Included with Tools Maximum Drill Ø Maximum Mill Ø 2.72 EXT 2.91 IC EXT 13/16" EXT 23/32" IC 3/4" IC 23/32" Coolant Output ( ) ( ) * 1,000 psi internal coolant (IC) cross tool CANNOT be run without coolant. Spindle Collet EXT ER-32 CW:CW 1:1 6, Nm IC & EXT* 1,000 psi ERC-32 CW:CW 1:1 6, Nm es Included with Tools Maximum Drill Ø Maximum Mill Ø 3.29 EXT 3.48 IC EXT 5/8" EXT 17/32" IC 9/16" IC 17/32" Coolant Output Main/Sub * 1,000 psi internal coolant (IC) cross tool CANNOT be run without coolant. Spindle Collet EXT ERAX-25 CW:CW 1:1 6, Nm Special IC & EXT* 1,000 psi ERAXC-25 CW:CW 1:1 6, Nm Special

11 Live Tools es Included with Tools Maximum Drill Ø Maximum Mill Ø /8" 17/32" driven tools are greased for life and delivered ready to use - no run-in required. All driven tools are CMM inspected and internal coolant tools are pressure tested Coolant Output Spindle Collet EXT (2) ERAX-25 CW:CW 1:1 6, Nm Special es Included with Tools Maximum Drill Ø Maximum Mill Ø /2" 15//32" Input CCW Output CW driven tools are greased for life and delivered ready to use - no run-in required. All driven tools are CMM inspected and internal coolant tools are pressure tested Coolant Output Spindle Collet EXT (2) ERAX-20 CCW:CW 1:1 6, Nm 32 mm

12 Live Tools es Included with Tools Maximum Drill Ø Maximum Mill Ø Input CCW Output CW /32" 5/16" driven tools are greased for life and delivered ready to use - no run-in required. All driven tools are CMM inspected and internal coolant tools are pressure tested Coolant Output Spindle Collet EXT (4) ERAX-16 CCW:CW 1:1 6, Nm 32 mm es Included with Tools Maximum Drill Ø Maximum Mill Ø 3.98 EXT 4.17 IC 5.94 EXT 6.77 IC ON OFF 4.21 EXT 13/16" EXT 23/32" IC 3/4" IC 23/32" * 1,450 psi internal coolant (IC) face tool CAN be run without coolant; the coolant sealing mechanism can be completely dis-engaged. Coolant Output ( ) ( ) Spindle Collet EXT ER-32 CW:CW 1:1 6, Nm IC & EXT* 1,450 psi ERC-32 CW:CW 1:1 6, Nm

13 Live Tools 2.76 out 1.46 es Included with Tools Maximum Drill Ø Maximum Mill Ø in /16" 23/32" out 4.21 driven tools are greased for life and delivered ready to use - no run-in required. All driven tools are CMM inspected and internal coolant tools are pressure tested Coolant Output ( ) EXT (2) ER-32 See Dwg. Above Spindle Collet 1:1 6, Nm es Included with Tools Maximum Drill Ø Maximum Mill Ø 3.78 EXT 3.98 IC 5.81 EXT 6.57 IC EXT 1/2" EXT 15/32" IC 1/2" IC 15/32" * 1,450 psi internal coolant (IC) face tool CAN be run without coolant; the coolant sealing mechanism can be completely dis-engaged. Coolant Output Spindle Collet EXT ER-20 CW:CW 1:2 12, Nm Special IC & EXT* 1,450 psi ERC-20 CW:CW 1:2 12, Nm Special

14 Live Tools in Spindle as Shown es Included with Tools Maximum Drill Ø Maximum Mill Ø /8" 17/32" out driven tools are greased for life and delivered ready to use - no run-in required. All driven tools are CMM inspected and internal coolant tools are pressure tested Coolant Output Spindle Collet EXT (2) ER-25 CW:CW 1:1 6, Nm 40 mm in Spindle as Shown es Included with Tools Maximum Drill Ø Maximum Mill Ø out out /8" 17/32" driven tools are greased for life and delivered ready to use - no run-in required. All driven tools are CMM inspected and internal coolant tools are pressure tested Coolant Output EXT (4) ER-25 See Dwg. Above Spindle Collet 1:1 6, Nm 40 mm

15 Live Tools es Included with Tools Maximum Drill Ø Maximum Mill Ø ± /2" 1/4" 4.36 When used for milling, the maximum cutter diameter is 1/4. driven tools are greased for life and delivered ready to use - no run-in required. All driven tools are CMM inspected and internal coolant tools are pressure tested Coolant Output Spindle Collet EXT ERAX-20 CCW:CW 1:1 6, Nm 32 mm es Included with Tools 2.68 A Maximum Hob Ø Gear Quality 80 mm AGMA 7 Maximum Hob Diameter: 80mm ±15 View A driven tools are greased for life and delivered ready to use - no run-in required. All driven tools are CMM inspected and internal coolant tools are pressure tested Coolant Arbor Diameter 3/4" Arbor EXT 3/4" CW:CCW 2:1 3, Nm

16 Static Tools Depth 3.54 Height ID 2.76 ID holders can be used with both internal and external coolant. Internal Coolant Plates are included with all multitasking turret ID holders Coolant ID Height Depth (Top) LB2000 M Yes IC/EXT 1.25" 4.53" 2.95" LB3000 M Yes IC/EXT 1.5" 4.69" 3.27" ID holders can be used with both internal and external coolant. Internal Coolant Plates are included with all multitasking turret ID holders Coolant ID Height Depth LB3000 M IC/EXT 1.5" 4.69" 5.24"

17 Static Tools ID holders can be used with both internal and external coolant. Internal Coolant Plates are included with all multitasking turret ID holders Coolant ID Height Depth LB3000 M IC/EXT 2" 4.11" 5.24" PARKING SCREW PARKING SCREW ID holders can be used with both internal and external coolant. Internal Coolant Plates are included with all multitasking turret ID holders. Coolant ID Top ID Bottom Height LB3000 MYW Yes IC/EXT 1.0" 1.5" 4.41"

18 Static Tools ID ID holders can be used with both internal and external coolant. Internal Coolant Plates are included with all multitasking turret ID holders Coolant ID Top ID Bottom Height LB3000 MYW IC/EXT 1.5" 1.5" 5.28" ID holders can be used with both internal and external coolant. Internal Coolant Plates are included with all multitasking turret ID holders Coolant ID Height Depth LB3000 MY No IC/EXT 1.0" x (4) 4.70" 4.59"

19 Static Tools ID holders can be used with both internal and external coolant. Internal Coolant Plates are included with all multitasking turret ID holders. Coolant ID Top ID Bottom Height LB3000 MY IC/EXT 1.25" 1.25" 4.69"

20 Static Tools Depth 2.75 / 1.0 Depth 1 Depth / 1.0 are available for all tool holders. Please contact Velocity: sales@velocityproducts.com. VELOCITY has the most complete inventory of tooling for OKUMA machine tools in North America. Stick Size Depth 1 Depth 2 Depth 3 LB2000 M Yes.75" 2.56".83" 4.76" LB3000 M Yes 1.0" 2.76" 1.02" 4.96" 1.0 Depth 1 Depth Width are available for all tool holders. Please contact Velocity: sales@velocityproducts.com. VELOCITY has the most complete inventory of tooling for OKUMA machine tools in North America. Stick Size Depth 1 Depth 2 Width LB3000 MYW Yes 1.0" 1.02" 5.98" "

21 Static Tools are available for all tool holders. Please contact Velocity: LB2000 MY LB3000 MY (2) Places VELOCITY has the most complete inventory of tooling for OKUMA machine tools in North America. Stick Size Depth Width Height Yes 1.0" 5.43" 4.33" 2.95".63 (2) Places (4) Places are available for all tool holders. Please contact Velocity: VELOCITY has the most complete inventory of tooling for OKUMA machine tools in North America. Stick Size Depth Width Height LB3000 MYW Yes 1.0" 6.93" 4.33" 2.95" 20

22 Static Tools Depth Depth 2 Depth are available for all tool holders. Please contact Velocity: sales@velocityproducts.com. VELOCITY has the most complete inventory of tooling for OKUMA machine tools in North America. Stick Size Depth 1 Depth 2 Depth 3 LB2000 M Yes.75" 2.60".83" 4.76" LB3000 M Yes 1.0" 2.80" 1.02" 4.96" are available for all tool holders. Please contact Velocity: sales@velocityproducts.com VELOCITY has the most complete inventory of tooling for OKUMA machine tools in North America. Stick Size Depth 1 Depth 2 Width LB3000 MYW Yes 1.0" 1.02" 5.16 "

23 Static Tools Basic 4.53 Extended are available for all tool holders. Please contact Velocity: VELOCITY has the most complete inventory of tooling for OKUMA machine tools in North America. Blade Size Depth Width Height LB3000 M Yes 32 mm 5.24" " 2.95" LB3000 M Yes 32 mm 5.24" " 4.53" are available for all tool holders. Please contact Velocity: sales@velocityproducts.com VELOCITY has the most complete inventory of tooling for OKUMA machine tools in North America. Blade Size Depth Width Height LB3000 MYW Yes 32 mm 5.39" " 2.95" 22

24 Tools 2.28 REGO-FIX C4 Collet Chucks ER Output Rego-Fix Part # ER ER ER ER Coolant Output ( ) IC & EXT* 1,000 psi 3.54 SU-matic * 1,000 psi internal coolant (IC) cross tool CANNOT be run without coolant. C4 Collet Chucks C4 CW:CW 1:1 6, Nm 10 mm See Above REGO-FIX C5 Collet Chucks ER Output Rego-Fix Part # ER ER ER ER Coolant Output IC & EXT* 1,000 psi SU-matic SU-matic * 1,000 psi internal coolant (IC) cross tool CANNOT be run without coolant. C5 Collet Chucks C5 CW:CW 1:1 6, Nm 10 mm See Above 23

25 Tools REGO-FIX C4 Collet Chucks ER Output Rego-Fix Part # ER ER ER ER Coolant Output IC & EXT* 1,450 psi SU-matic * 1,450 psi internal coolant (IC) face tool CAN be run without coolant; the coolant sealing mechanism can be completely dis-engaged. C4 Collet Chucks C4 CW:CW 1:1 6, Nm 10 mm See Above REGO-FIX C4 Collet Chucks Coolant 1.42 SU-matic Output ER Output Rego-Fix Part # ER ER ER ER C4 Collet Chucks LB3000 M No IC/EXT C4 10 mm See Above 24

26 Tools REGO-FIX C4 Collet Chucks SU-matic 4.17 ER Output Rego-Fix Part # ER ER ER ER Riser block available to allow for adjacent mounting on turret. Part # Coolant SU-matic Output C4 Collet Chucks LB3000 MY No IC/EXT (2) C4 10 mm See Above REGO-FIX C4 Collet Chucks ER Output Rego-Fix Part # ER ER ER ER Coolant SU-matic Output C4 Collet Chucks LB3000 MYW No IC/EXT (2) C4 10 mm See Above 25

27 Tools REGO-FIX C4 Collet Chucks Coolant SU-matic Output ER Output Rego-Fix Part # ER ER ER ER C4 Collet Chucks LB3000 M Yes IC/EXT C4 10 mm See Above REGO-FIX C4 Collet Chucks ER Output Rego-Fix Part # ER ER ER ER Coolant SU-matic Output C4 Collet Chucks LB3000 MW Yes IC/EXT (2) C4 10 mm See Above 26

28 TOOLING FOR LB2000/LB3000 M/MY/MYW A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty* Velocity Products 350 Electronics Boulevard, Huntsville, AL sales@velocityproducts.com *Warranty voided if internal coolant tools are used without coolant and coolant filtration. Exceeding specified maximum cutting tool sizes voids warranty. Velocity Products Specifications subject to change without notice Velocity-Okuma LB2000/LB

July 2017 TOOLING FOR GENOS L300/L3000 BMT. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

July 2017 TOOLING FOR GENOS L300/L3000 BMT.  A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty TOOLING FOR July 2017 GENOS L300/L3000 BMT www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest

More information

July 2018 ONLY FOR LU3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

July 2018 ONLY FOR LU3000 M/MY.   A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty ONLY FOR OKUMA July 2018 LU3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest

More information

July 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

July 2018 ONLY FOR LT2000 M/MY.  A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory

More information

August 2018 ONLY FOR MULTUS U3000/U4000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

August 2018 ONLY FOR MULTUS U3000/U4000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty ONLY FOR OKUMA August 2018 MULTUS U3000/U4000/U5000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the

More information

April 2017 TOOLING FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

April 2017 TOOLING FOR LT3000 M/MY.  A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty TOOLING FOR April 2017 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe

More information

April 2017 TOOLING FOR MULTUS U3000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

April 2017 TOOLING FOR MULTUS U3000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty TOOLING FOR April 2017 MULTUS U3000/U4000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory

More information

July 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

July 2018 ONLY FOR LT3000 M/MY.   A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory

More information

TOOLING KITS. July 2018 INCLUDES OKUMA TOOLING COMMONALITY CHARTS!

TOOLING KITS.  July 2018 INCLUDES OKUMA TOOLING COMMONALITY CHARTS! INCLUDES OKUMA TOOLING COMMONALITY CHARTS! July 08 TOOLING KITS www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty VELOCITY TOOLING KITS Velocity Tooling:

More information

BMT 65 TOOLING BENZTOOLING.COM

BMT 65 TOOLING BENZTOOLING.COM BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s

More information

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P: PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters

More information

Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW

Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form

More information

BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret.

BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret. BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret www.benztooling.com March 2015 Table of Contents Live Tools ST 10 (Y) ST 20 (Y) ST25 (Y) ST 30 (Y) ST 35 (Y) DS 30 (Y) ST 20 SS (Y) ST 30 SS (Y) DS

More information

TW Series: TW-10, TW-20 DRIVEN AND STATIC TOOLING CATALOG

TW Series: TW-10, TW-20 DRIVEN AND STATIC TOOLING CATALOG Nakamura-Tome TW Series: TW-10, TW-20 DRIVEN AND STATIC TOOLING CATALOG 1019 BERGIN RD. HOWELL, MI 4884 PHONE : 877 91 TOOLS ( 810 62 4446 ) FAX: 877 92 TOOLS ( 810 62 4467 ) EMAIL: info@mdtooling.com

More information

DRIVEN and STATIC TOOLING For MURATEC

DRIVEN and STATIC TOOLING For MURATEC 10139 BERGIN RD. HOWELL, MI 48843 PHONE : 8-91-TOOLS ( 810-63-4446 ) FAX: 8-9-TOOLS ( 810-63-446 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com DRIVEN and STATIC TOOLING For MURATEC Live Tooling

More information

BMT LIVE & STATIC TOOLING

BMT LIVE & STATIC TOOLING BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835

More information

Driven Toolholders for MAZAK Machines

Driven Toolholders for MAZAK Machines Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /

More information

Alberti LIVE TOOLS DOOSAN MACHINE TOOLS AMERICA

Alberti LIVE TOOLS DOOSAN MACHINE TOOLS AMERICA 55 21.65 1 47 c te ca Me 40 77 LIVE DOOSAN 12 80 54 N 9b DI 8/ O 0x1 CC x3 TA 0.8 AT 6x 16 W1 67 55 18 4 11 7 MACHINE AMERICA 20 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com

More information

Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12

Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12 1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested

More information

DOOSAN LIVE & STATIC TOOLING

DOOSAN LIVE & STATIC TOOLING DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800

More information

GTS SERIES. Twin Spindles & Turrets CNC Turning Centers

GTS SERIES. Twin Spindles & Turrets CNC Turning Centers GTS SERIES Twin Spindles & Turrets CNC Turning Centers GTS series GTS series Twin Turrets TWIN SPINDLES & TURRETS CNC TURNING CENTER General Features Accessories & Applications Designed for simultaneous

More information

NAKAMURA TOME LIVE TOOLING

NAKAMURA TOME LIVE TOOLING NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000

More information

DRIVEN and STATIC TOOLING For EMAG

DRIVEN and STATIC TOOLING For EMAG 1019 BERGIN RD. HOWELL, MI 4884 PHONE : 877-91-TOOLS ( 810-6-4446 ) FAX: 877-9-TOOLS ( 810-6-4467 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com DRIVEN and STATIC TOOLING For EMAG Live Tooling

More information

PRECI-FLEX. The Flexible Tool System

PRECI-FLEX. The Flexible Tool System PRECI-FLEX The Flexible Tool System EXSYS Tool, Inc. T:800.397.9748 F:800.397.9739 P:352.588.4345 www.mazaktooling.com CONTACT INFORMATION TABLE OF CONTENTS Main Distribution for USA Mexico Canada Repair

More information

Driven & Static Tooling Citizen

Driven & Static Tooling Citizen Driven & Static Tooling Driven & Static Tooling 3 Table of Contents Tooling K12 & K16 Driven Tools.... 3 M20, M32 Series 3 Driven Tools.... 4 M20, M32 Series 3 Static Tools... 7 M32 Series 5 Only Driven

More information

HIGH TORQUE LIVE TOOLS

HIGH TORQUE LIVE TOOLS HIGH TORQUE LIVE TOOLS Mori Seiki NLX 4000 High Torque Live Tools Fax: (847) 367-4815 Email: inquiries@lyndexnikken.com Fill in the form below and fax it to (847) 367-4815, or visit www.lyndexnikken.com

More information

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center

More information

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 Alberti LIVE TOOLS 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Alberti

More information

We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»

We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» » Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting

More information

E3000 SERIES CONTROL UNIT

E3000 SERIES CONTROL UNIT ispeed E E BRUSHLESS MOTOR & SPINDLE SERIES Modular Type (ø mm),~, min- (rpm) Maximum Output W Motor speed is displayed accurately on the front panel. Auto or Manual Control Modes. Can be installed on

More information

DRIVEN and STATIC TOOLING For DOOSAN BMT45

DRIVEN and STATIC TOOLING For DOOSAN BMT45 DRIVEN and STATIC TOOLING For DOOSAN BMT45 039 BERGIN RD. HOWELL, MI 48843 PHONE : 877-9-TOOLS ( 80-632-4446 ) FAX: 877-92-TOOLS ( 80-632-4467 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com June

More information

We set the standard for the highest precision and most advanced technology in the machine tool accessory market

We set the standard for the highest precision and most advanced technology in the machine tool accessory market ANGLE HEADS heimatec GmbH-Renchen, Germany Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility, on 7.5 acres, is home to over 100

More information

OMG NorthAmerica. The synthesis...

OMG NorthAmerica. The synthesis... Series VH Series MO Series BAH Series TA OMG NorthAmerica The synthesis... SERIES BAH Extensions and Angle Heads SERIES HT Revolving heads SERIES TA-TAV-TAF-TAO Angle heads SERIES MO High precision spindle

More information

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of

More information

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 LIVE 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com STRAIGHT 90 DUAL OUTPUT

More information

FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4

FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4 FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp

More information

Radial Drilling And Milling Heads TYPE HAAS

Radial Drilling And Milling Heads TYPE HAAS Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106

More information

Tooling for Swiss Automatics

Tooling for Swiss Automatics Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical

More information

ER System The pioneering toolholding system. Product catalog

ER System The pioneering toolholding system. Product catalog ER System The pioneering toolholding system Product catalog Company profile Providing solutions for cutting-edge toolholding Three systems one brand 4 Wet and dry machining 6 Special solutions: recool

More information

Clamping Nuts. Sealing Disks Coolant Flush Disks. Clamping Nuts. Sealing Disks (DS) Coolant Flush Disks (KS)

Clamping Nuts. Sealing Disks Coolant Flush Disks. Clamping Nuts. Sealing Disks (DS) Coolant Flush Disks (KS) Clamping Nuts Sealing Disks Coolant Flush Disks Clamping Nuts.01 Features and Benefits.02 Assembly Instructions.0 Hi-Q/ER Standard Nuts.06 Hi-Q/ERC Standard Coolant Nuts for DS and KS Disks.08 Hi-Q/ERC

More information

BEST OF 2014 January December

BEST OF 2014 January December Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

More information

Toolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available

Toolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine

More information

GTX Multi-tasking Turning Centers SERIES

GTX Multi-tasking Turning Centers SERIES GTX-2000 Multi-tasking Turning Centers SERIES Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining

More information

TOOLING FOR SWISS-TYPE CNC MACHINES. Celebrating. 15 Years. Version 10.17

TOOLING FOR SWISS-TYPE CNC MACHINES. Celebrating. 15 Years. Version 10.17 Celebrating 15 Years TOOING FOR SWISS-TYPE CNC MACHINES Tooling Tooling For For Swiss-Type Swiss-Type CNC CNC Machines Version 10.17 Machines Introduction... Genevieve Swiss Industries, Inc. brings to

More information

Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation

Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation General The Eltool Livetool Angle Heads can provide years of service if properly used and maintained. The Livetool uses

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are

More information

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 LIVE 77 Includes Tools 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Lathe Tooling

More information

Accessories, spare parts and measuring equipment

Accessories, spare parts and measuring equipment Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare

More information

Features Benefits. Toolholders. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and part number.

Features Benefits. Toolholders. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and part number. Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 00/ISO 400. Marking Type and part number. Traceability Lot number marking on all products for traceability through the

More information

Haas Factory Outlet 2013 PERFORMANCE ACCESSORY CATALOG

Haas Factory Outlet 2013 PERFORMANCE ACCESSORY CATALOG 2013 PERFORMANCE ACCESSORY CATALOG Contents Haas ST-10................................................................... Page 1 Haas ST-20 All Versions.......................................................

More information

GMS SERIES Tool Spindle Type 5-axis Turning Centers

GMS SERIES Tool Spindle Type 5-axis Turning Centers GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide

More information

BT/ER TOOLHOLDERS COLLETHOLDERS 7-4. Supplied with: Colletholder and clamping nut. Balancing Rings. Drawing. D1 [mm] Plane 1. L1 [mm] L2 [mm] Plane 2

BT/ER TOOLHOLDERS COLLETHOLDERS 7-4. Supplied with: Colletholder and clamping nut. Balancing Rings. Drawing. D1 [mm] Plane 1. L1 [mm] L2 [mm] Plane 2 /ER MAS 3 Form A+AD D [mm] D [mm] 30/ER 6 x 0 H 30.6 69. 5 5. 5 FRW 5 30/ER 6 x H 30.65 5 7. 5 FWR 5 30/ER 5 x 0 H 3 0 3 6. 5. -- FWR 35 30/ER 5 x H 35 0 3 88. 5 -- FWR 35 30/ER 3 x 0 30.3 0 7. 3 30/ER

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your

More information

Typhoon L Series CNC Turning Centres

Typhoon L Series CNC Turning Centres Typhoon L Series CNC Turning Centres www.colchester.co.uk Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal

More information

FEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES

FEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES FEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES The Supertec GU CNC series are designed for grinding complex workpieces in small and large batch productions as well as individual parts. It is built

More information

Automatic Tool Presetter System Belt-Type Chip Conveyor Spindle Orientation Parts Catcher

Automatic Tool Presetter System Belt-Type Chip Conveyor Spindle Orientation Parts Catcher Haas ST-10 GR Series CNC Lathe Gantry The High-Performance Router SystemsTurning Center [ S p e c i a l S e r i e s ] 12-station bolt-on style turret Belt-type chip conveyor available 6000-rpm high-speed

More information

Patented AirShield Technology. Sentry Belt-Driven Spindles. C017 Cartridge Spindle B035, B040, B050, B070 & B090 Block Spindles

Patented AirShield Technology. Sentry Belt-Driven Spindles. C017 Cartridge Spindle B035, B040, B050, B070 & B090 Block Spindles Patented AirShield Technology Sentry Belt-Driven s C017 Cartridge B035, B040, B050, B070 & B090 Block s Sentry Precision s Value-Priced Sentry Precision Belt-Driven s The Sentry line is our standard building

More information

Alberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30

Alberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30 350 5 TURBODRILL/TURBOFLEX 139 79 53 11 184 0 10 Ø25 Ø80 86 ER40 3/30 131 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com TURBODRILL &

More information

INNOVATION : PERFORMANCE www.velocityproducts.com Ultra-Bright LED Lighting for Machine Tools Innovation : Performance Velocity Ultra-Bright LED Lighting Velocity ultra-bright LED lighting products are

More information

Sentry Precision Spindles

Sentry Precision Spindles Sentry Precision s Value-Priced Sentry Precision Belt-Driven s The Sentry line is our standard building block spindle and is offered as a low-cost solution for many applications that call for a precision,

More information

BEST OF A selection of our most popular products. To view the complete range visit

BEST OF A selection of our most popular products. To view the complete range visit BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it

More information

GTZ-2000 SERIES. Multi-tasking Turning Centers

GTZ-2000 SERIES. Multi-tasking Turning Centers GTZ-2000 SERIES Multi-tasking Turning Centers Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining

More information

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit

More information

EVOLUTION LINE ANGLE HEADS

EVOLUTION LINE ANGLE HEADS EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands

More information

Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)

Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420) HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16

More information

GTZ SERIES. Multi-tasking Turning Centers

GTZ SERIES. Multi-tasking Turning Centers GTZ SERIES Multi-tasking Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining requirements

More information

turning centers Haas Automation Inc. TURNING CENTERS

turning centers Haas Automation Inc. TURNING CENTERS All New turning centers The New Generation Haas turning centers are the culmination of 15 years of continuous development, and they offer the most performance for the money the best value of any turning

More information

Experienced people, innovative technologies

Experienced people, innovative technologies Experienced people, innovative technologies T r a d i t i o n a n d i n n ovat i o n, o u r k e y s to s u c c e ss In the Machine Tool field since 1952, Duplomatic Automation offers innovative and flexible

More information

BEST OF 2015 January December

BEST OF 2015 January December BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January

More information

Typhoon B Series CNC Turning Centres

Typhoon B Series CNC Turning Centres Typhoon B Series CNC Turning Centres www.colchester.co.uk Typhoon B Series CNC Turning Centres The Typhoon B Series constructed from a one piece cast, base incorporates FEM analysis to achieve an optimal

More information

LM5200 MILLING MACHINE

LM5200 MILLING MACHINE LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling

More information

I.T ODT-N * series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION ISSUED

I.T ODT-N * series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION ISSUED series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION I.T. 6482 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 06-09

More information

Quick change for vertical lathes

Quick change for vertical lathes Quick change for vertical lathes VTL brochure_a4_v4.indd 1 Machine utilization Metal cutting efficiency Vertical turning lathes, or VTLs, are one of the most traditional machine types, table diameters

More information

MULTITURRET BAR TURNING B436Y2

MULTITURRET BAR TURNING B436Y2 MULTITURRET BAR TURNING B436Y2 B436Y2 The range of QUATTRO machines have been produced by Biglia since 1990 and celebrating the third generation is now further enhanced by the B436Y2 model. This new model

More information

SERIES 36-AM & BD...4-5 SERIES 36-AM-RA & BD RA...6-7 SERIES 50-AM & BD...8-9 SERIES 36 TOOL CHANGER...10-11 SERIES 50-TOOL CHANGER...12-13 SERVO MOTOR ADAPTERS...14-15...16-17...18-19 COLLET NUT...19

More information

MULTI-TASK MACHINING. Tooling possibilities Products

MULTI-TASK MACHINING. Tooling possibilities Products Content Tooling possibilities Products Toolholder overview Coromant Capto multi-functional tools CoroPlex MT - milling and turning tool CoroPlex TT - turning tool CoroPlex SL mini-turret CoroTurn P - Coromant

More information

powrgrip for mold & die Trustworthy toolholding solutions

powrgrip for mold & die Trustworthy toolholding solutions powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and

More information

LM5200 MILLING MACHINE

LM5200 MILLING MACHINE LM5200 MILLING MACHINE 2017 12 LM52 Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). The Climax LM5200 Milling

More information

DM-TR. series 10 RADIAL DRIVEN TOOL SYSTEM WITH DIRECT MOTOR TURRETS (PATENTED) TECHNICAL INFORMATION I.T ISSUED 09-11

DM-TR. series 10 RADIAL DRIVEN TOOL SYSTEM WITH DIRECT MOTOR TURRETS (PATENTED) TECHNICAL INFORMATION I.T ISSUED 09-11 DM-TR * RADIAL DRIVEN TOOL SYSTEM WITH DIRECT MOTOR TURRETS (PATENTED) series 10 TECHNICAL INFORMATION I.T. 6468 The data given in the I.T. are subject to technical modifications without notice. GB ISSUED

More information

MULTI-TASK MACHINING. Tooling possibilities Products

MULTI-TASK MACHINING. Tooling possibilities Products Content MULT-TASK MACNNG MULT-TASK MACNNG Tooling possibilities Products Tool holder overview Coromant Capto multifunctional tools CoroPlex MT - milling and turning tool CoroPlex TT - turning tool CoroPlex

More information

ER Collets Nuts Disks

ER Collets Nuts Disks Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50

More information

WORKHOLDING SYSTEMS

WORKHOLDING SYSTEMS www.ptgworkholding.co.uk WORKHOLDING SYSTEMS INSTALLATION & PRE-LOADING INSTRUCTIONS INSTALLATION & PRE-LOADING INSTRUCTIONS Pre-load Flats Machine Drawbar M/C Spindle Pre-load Adjustment Screw Mandrel

More information

GTO Precise, universal stationary chuck for collets

GTO Precise, universal stationary chuck for collets Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest

More information

Taper shank arbors for drill chucks

Taper shank arbors for drill chucks KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole

More information

Total Tooling Systems 2011

Total Tooling Systems 2011 Made in Switzerland Swiss Precision Tools Total Tooling Systems 011 Company founder Fritz Weber Made in Switzerland Company History since 1950 The REGO-FIX company history has been strongly influenced

More information

ANGLE HEADS & SPINDLE SPEEDERS

ANGLE HEADS & SPINDLE SPEEDERS & SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119

More information

Product Information PI Disk-type tool turret

Product Information PI Disk-type tool turret Product Information PI 21.3 Disk-type tool turret without tool drive Series with tool drive Series 0.5.460.4xx 0.5.456.4xx (axial) 0.5.450.4xx (radial) 2017-05-31 PI 21.3 3 Contens Table of Contens Turret

More information

BNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA

BNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA BNA-42MSY2 Fixed Headstock Type Automatic CNC Lathe BNA BNA- 42MSY2 Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA-42MSY2 is able to handle complex machining,

More information

PERFORMANCE : VALUE PRODUCT CATALOG

PERFORMANCE : VALUE PRODUCT CATALOG PERFORMANCE : VALUE by P a r t n e r s i n P r o d u c t i v i t y PRODUCT CATALOG PERFORMANCE : VALUE A Leading Global Producer FEELER is a leading global producer of numerically controlled machine tools

More information

PROVEN CHUCK WITH SPIRAL RING

PROVEN CHUCK WITH SPIRAL RING PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping

More information

Land Area : 215,000 ft 2. Land Area : 200,000 ft 2. Land Area : 286,000 ft 2. Land Area : 5,400 ft 2 Land Area : 719,000 ft 2

Land Area : 215,000 ft 2. Land Area : 200,000 ft 2. Land Area : 286,000 ft 2. Land Area : 5,400 ft 2 Land Area : 719,000 ft 2 TURNING CENTERS by MACHINING CENTERS by YAMA SEIKI USA belongs to the GMT (GOODWAY Machine Tools) Group, which includes well-known machine tool manufacturers, GOODWAY, AWEA and EXTRON. The GMT Group has

More information

BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group

BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40

More information

VictorTaichung. Art of Smooth Performance. Servo turret One-piece slant bed Box slideways High thrust force High Rapid feeds Rotary operation panel

VictorTaichung. Art of Smooth Performance. Servo turret One-piece slant bed Box slideways High thrust force High Rapid feeds Rotary operation panel R VictorTaichung Art of Smooth Performance Servo turret One-piece slant bed Box slideways High thrust force High Rapid feeds Rotary operation panel Victor Taichung an established ISO 91 & 141 company Smooth

More information

Universal Horizontal Milling Machines

Universal Horizontal Milling Machines FUTV-13 Shown with some options Republic Machine Tool Co. Universal Horizontal Milling Machines Higher Standards for Demanding Applications FU-EF Models: FU-13-EF / FU-152-EF / FU-185-EF Universal Horizontal

More information

Geared scroll chucks with independently adjustable jaws

Geared scroll chucks with independently adjustable jaws Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,

More information

HURCO VDI40 TOOLING FOR HURCO

HURCO VDI40 TOOLING FOR HURCO HURCO VDI40 TOOLING FOR HURCO Tae of Contents Quick Change Tooing Page 4 LinA Broach Page 5 Axia Page 6-8 Raia Page 7-9 Ajustae Ange Page 9 Static Toos Page 10-18 Accessories Page 19-21 2 Mouar esign for

More information

E3000 Ultra-high-Speed & Super-Precision

E3000 Ultra-high-Speed & Super-Precision E Ultra-high-Speed & Super-Precision www.nakanishi-inc.com NAKANISHI INC. and design are subject to change without notice. PR-K7E Ver. '...I Headquarters Factory 7 Shimohinata, Kanuma, Tochigi -, Japan

More information

Type2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A

Type2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors

More information

Driven Toolholders for HAAS Machines

Driven Toolholders for HAAS Machines riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool

More information

HES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE

HES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output

More information