Actuator. Series K. Heytec Antriebstechnik GmbH Heidemannstraße München
|
|
- Beatrix George
- 6 years ago
- Views:
Transcription
1 Actuator Series K Heytec Antriebstechnik GmbH Heidemannstraße München Phone: 089 / Fax: 089 / info@heytec.de Internet: Issue 07/2017
2 Table of contents Catalogue K 01/96 Technical Overview Function... 3 Drive-side and output-side attachments... 3 Control devices... 4 Type designation... 5 Types... 5 Selection tables K2 with spur gear... 6 K2 with spur and bevel gear... 8 K2 with worm gear... 9 Dimensional drawings K2 with free drive shaft K2 with motor K2 with spur gear K2 with spur and bevel gear K2 with worm gear Agencies Germany This catalogue contains product specifications, but no assurance of properties. We reserve the right for technical changes and changes of availability. All dimensions are given in mm. -2 -
3 Drive power = 0.18 kw torques up to 70 Nm speeds from 0.13 to 4,200 1/min Adjusting range 1: 9 Adjustment option at standstill Consistent speed, quiet running, long life and high efficiency Lifetime lubrication means maintenancefreedom Completely closed design, all of the transmission parts running in oil bath, thereby suitable for use in hazardous areas Function Two axially parallel hollow cones enclose a steel ball under prestressing. The ball moves along the hollow cones on an almost punctiform contact area, transmitting the power from the drive shaft to the output shaft in the same direction. The direction of rotation is arbitrary. A sliding ball guide at the control device steplessly varies the transmission ratio between the input and output shafts. Thus, an adjusting range between 3:1 and 1:3 is possible (total R = 9). Speed is set using an adjustment screw; it takes 10 turns to traverse the entire adjusting range. Drive-side attachments Free drive shaft In this version maximum drive speed at continuous operation must not exceed /min. Permissible radial load in the drive shaft is 44 N. Motor mounting Powered by a B14 standard motor. Standard version includes either 4-pole threephase AC motors, three-phase explosion-proof motors or single phase AC motors. -side attachments The following devices can be attached to adjust the output speed to requirements: Spur gear units, 1 to 7 steps Spur and bevel gears Worm gears -3 -
4 Control devices Default control device The entire adjusting range is traversed by 10 turns of the handwheel. The control sleeve is provided with a linear 1-10 scale, yet with no direct relation to the output speed, since the control curve is approximately logarithmic. Control device II Using rigid or flexible shafts, this version with a free adjusting shaft is used for extending the control device; sprockets or the like can also be used. Travel is 10 mm, the required torque approximately 1.3 nm. Attached control device Together with control device II and the corresponding shaft extension, mechanical remote adjustment is possible with series K actuators. -4 -
5 K2 designs according to DIN Type designation K2 69 W3-18/4 Series K2 Actuator, freely adjustable Reduction gear unit 1 1-step spur gear 2 2-step spur gear to 7-step spur gear to 6-step spur gear to 6-step spur gear S1 1-step worm gear Spiral bevel gear W2 W3 20 Nm 30 Nm Motor 18/ KW, 4-pole, three-phase or 1-phase AC -5 -
6 Actuator with spur gear Driving power Series K Adjusting range 0.18 KW 1:9 speeds n2 at n1= /min torque M2 Gearing ratio w motor w/o motor Dimensio ns 1/min Nm Type i = kg kg Fig. no K2-18/ K21-18/ K23-18/ K21-18/ K21-18/ K22-18/ K23-18/ K22-18/ * K23-18/ K22-18/ K239-18/ * K24-18/ * K24-18/ * K24-18/ K239-18/ *10 - *10 K24-18/ * K239-18/ *10 - *10 K24-18/ * K249-18/ K240-18/ *10 - *10 K24-18/ *10 - *10 K25-18/ *30-23 K249-18/ *70-23 K240-18/ *10 - *10 K25-18/ *30 - *30 K249-18/ *70-31 K240-18/ *10 - *10 K25-18/ *30 - *30 K259-18/ *70-37 K250-18/ *10 - *10 K25-18/ *10 - *10 K26-18/ *30 - *30 K259-18/ *70-64 K250-18/ *10 - *10 K26-18/ *30 - *30 K259-18/ *70 - *70 K250-18/ *10 - *10 K26-18/ * Design-related permissible torque of transmission gear -6 -
7 Actuator with spur gear Driving power Series K Adjusting range 0.18 KW 1:9 speed n2 at n1= /min torque M2 Gearing ratio w motor w/o motor Dimensio ns 1/min Nm Type i = kg kg Fig. no *30 - *30 K269-18/ *70 - *70 K260-18/ *10 - *10 K26-18/ *10 - *10 K26-18/ *30 - *30 K269-18/ *70 - *70 K260-18/ *30 - *30 K269-18/ *70 - *70 K260-18/ *10 - *10 K27-18/ *10 - *10 K27-18/ *10 - *10 K27-18/ *10 - *10 K27-18/ *10 - *10 K27-18/ * Design-related permissible torque of transmission gear -7 -
8 Actuator with spur and bevel gear Series K Driving power Adjusting range 0.18 KW 1:9 speed n2 at n1= /min torque M2 Gearing ratio w motor w/o motor Dimensio ns 1/min Nm Type i = kg kg Fig. no K23W2-18/ K23W2-18/ K23W2-18/ K23W2-18/ K22W2-18/ K23W2-18/ * K22W2-18/ * K23W2-18/ K239W3-18/ * K22W2-18/ *20-10 K24W2-18/ * K24W2-18/ * K239W3-18/ * K24W2-18/ * K239W3-18/ * K24W2-18/ * K249W3-18/ *20 - *20 K24W2-18/ *30 - *30 K249W3-18/ *20 - *20 K24W2-18/ *20 - *20 K25W2-18/ *30 - *30 K249W3-18/ *20 - *20 K25W2-18/ *30 - *30 K259W3-18/ *20 - *20 K25W2-18/ *20 - *20 K25W2-18/ *30 - *30 K259W3-18/ *20 - *20 K26W2-18/ *30 - *30 K259W3-18/ *20 - *20 K26W2-18/ *30 - *30 K269W3-18/ *30 - *30 K26W2-18/ *20 - *20 K26W2-18/ *20 - *20 K26W2-18/ *30 - *30 K269W3-18/ *30 - *30 K269W3-18/ *20 - *20 K27W2-18/ *20 - *20 K27W2-18/ *20 - *20 K27W2-18/ *20 - *20 K27W2-18/ *20 - *20 K27W2-18/ * Design-related permissible torque of transmission gear -8 -
9 Actuator with worm gear Series K Driving power Adjusting range 0.18 KW 1:9 speed n2 at n1= /min torque M2 Gearing ratio w motor w/o motor Dimensio ns 1/min Nm Type i = kg kg Fig. no K2S1-18/ K2S1-18/ K2S1-18/ K2S1-18/ K2S1-18/ * K2S1-18/ * K2S1-18/ * K2S1-18/ * K2S1-18/ * K2S1-18/ * K2S1-18/ * Design-related permissible torque of transmission gear -9 -
10 -10 -
11 -11 -
12 -12 -
13 -13 -
Actuator. Actuators. Series R. Series R. Heytec Antriebstechnik GmbH Heidemannstraße München
Actuator Actuators Series R Series R Heytec Antriebstechnik GmbH Heidemannstraße 3 80939 München Phone: 089 / 31 21 35 0 Fax: 089 / 3 13 25 26 Email: info@heytec.de Internet: www.heytec.de Issue July 201719450.00031
More informationSmall Geared Motors Series G2
Small Geared Motors Series G2 Heytec Antriebstechnik GmbH Heidemannstraße 3 D-80939 München Tel.: ++49 89 / 31 21 35 0 Fax: ++49 89 / 3 13 25 26 E-Mail: info@heytec.de Internet: www.heytec.de Edition July
More informationPlanetary Gearing. Series GPT. Economy-Series with high torques and normal backlash. Heytec Antriebstechnik GmbH Lerchenstraße 115 D München
Planetary Gearing Series GPT Economy-Series with high torques and normal backlash Heytec Antriebstechnik GmbH Lerchenstraße 115 D-80995 München Tel.: ++49 89 31 21 35 0 Fax: ++49 89 313 25 26 Email: info@heytec.de
More informationBEVEL GEAR UNITS ZZ-SERVOLINE
BEVEL GEAR UNITS ZZ-SERVOLINE ZZ-SERVOLINE GEARBOX DESIGN AND FUNCTIONAL FEATURES Gear Ratios i= 3:1 i= 4:1 i= 5:1 i= 6:1 i= 8:1 i= 10:1 i= 12:1 i= 15:1 Spiral Bevel Gear KLINGELNBERG tooth system Hypoid
More informationTechnical Data Electric double-motor-actuators
M768 Electric double-motor-actuators Contents Page General data Overview, application, design and mode of operation, mounting position Technical details General Motors Switching and signaling unit Electrical
More informationFactor 1) Modulating torque 4) [Nm]
Nominal Max. valve Modulating 4) Valve Valve attachment Gearbox Reduction ratio Standard EN ISO 5210 Factor 1) Nominal Gearbox Max. input s Modulating Input shaft 2) Weight 3) Option DIN 3210 Standard
More informationLenze. Drives with worm gearboxes 52.
6 887 Lenze Drives with worm gearboxes 5. Lenze Drive Systems GmbH, Postfach 0 5, D-76 Hameln, Site: Groß Berkel, Hans-Lenze-Straße, D-855 Aerzen, Phone ++9 (0) 55 8-0, Telefax ++9 (0) 55 8- E-Mail: Lenze@Lenze.de
More informationValve attachment Gearbox Reduction ratio :1 5) : ,
Nominal Max. valve 4) Valve Valve attachment Gearbox Standard EN ISO 5210 Option DIN 3210 120 60 GST 10.1 250 120 GST 14.1 Nominal Max. input s Gearbox Factor 1) Input shaft 2) Weight 3) Standard [mm]
More informationFactor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :
Nominal Max. valve 4) Valve Valve attachment Type Reduction ratio EN ISO 5210 Factor 1) Nominal Gearbox Max. input s Input shaft 2) Weight 3) Option DIN 3210 Option [kg] 120 60 GK 10.2 1:1 0.9 135 66 20
More informationantriebstechnik ELA Electromechanical Linear Actuator
D antriebstechnik ELA Electromechanical Linear Actuator Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of trapezoidal or ball screws driven by an electric motor
More informationOperating Instructions
Operating Instructions Table of contents Table of contents... 1 1. Declaration... 1 2. Warranty and liability... 2 3. Gear description... 2 4. Gear types... 2 5. Safety... 3 5.1 General safety information...
More informationTechnical description... 1 Limit switch versions MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8
Index Technical description... 1 Limit switch versions... 3 MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8 MS 12 Power tables... 10 Dimensions... 11 Spare part lists... 13 MR 30 Power tables...
More information2 Important Information, Tables and Dimension Sheets
Permitted combinations Important Information, Tables and Dimension Sheets.1 Permitted combinations Structure of tables These tables show combinations of gear units and AC (brake) motors that are geometrically
More informationwww.motiontech.com.au Copyright SERVOMECH This catalogue contents are under publisher copyright and may not be reproduced unless permission is agreed. Every care has been taken to ensure the accuracy of
More informationReduction ratio. Factor 1)
Max. valve torque to [Nm] 90,000 63,000 125,000 125,000 64,000 250,000 250,000 Valve Flange according to EN ISO 5211 F40 200 F48 250 F60 315 Gearbox/primary Factor 1) Gearbox Turns for 90 Input shaft 2)
More informationDRIVE-TECHNOLOGY INKOMA - GROUP. KG bevel shaft mounting right angle gear units
-GROUP - DRIVE-TECHNOLOGY GROUP KG bevel shaft mounting right angle gear units -GROUP Headoffice Sitz der Maschinenbau GmbH Neue Reihe 44 D - 38162 Schandelah - Germany phone: +49/(0)5306-9221-0 fax: +49/(0)5306-9221-50
More informationGEARBOXES for operation of industrial valves
GEARBOXES for operation of industrial valves TECHNICAL DOCUMENTATION 2018 Part-turn gearboxes GS 50.3 GS 250.3 GS 50.3 GS 250.3 with base and lever GS 315 GS 500 GS 630.3 GHE 05.1 GHE 12.1 Multi-turn gearboxes
More information7 Important information on selection tables and dimension drawings
Possible geometrical combinations Important information on selection tables and dimension drawings. Possible geometrical combinations.. Structure of the tables These tables show geometrically possible
More information8 Important Information about Tables and Dimension Sheets
Geometrically possible combinations Important Information about Tables and Dimension Sheets.1 Geometrically possible combinations Structure of the tables These tables show combinations of gear units and
More informationPerformance Plus: Spiral Bevel Series
Performance Plus: Spiral Bevel Series GAM Perfomance Plus Miniature Spiral Bevel Gearboxes The VP Series Performance Plus Miniature Bevel Gearboxes pack high performance in a small package with the highest
More informationSystem reliability calculation
System reliability calculation System level reliability, KISSsys release 03-2017 EES KISSsoft GmbH Hauptstrasse 7 6313 Menzingen Switzerland Tel: +41 41 755 33 20 h.dinner@ees-kisssoft.ch www.ees-kisssoft.ch
More informationPOWERGEAR. Miniature NEW. Actual Size. Impressively small and incredibly powerful.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY POWERGEAR Miniature NEW Impressively small and incredibly powerful. Actual Size The bevel gearbox with minimum size at maximum performance and precision The
More informationPERFORMANCE with: Duty Cycle Fi = 100 % over 10 min. at 25 C environment
5.1 BALL SCREW LINEAR ACTUATOR BSA 10 Compact ball screw linear actuator with integral electric motor suitable for push and pull motions. Rolled and hardened ball screw. Case hardened and ground ball nut.
More informationFactor 2) 160:1 6) /(30) FA10 (FA14) :1 6) /(30) FA10 (FA14) 27 86
to [ft-ib] Valve Max. valve Valve attachment Gearbox Reduct. torque 1) Modulating torque 4) to [ft-ib] Flange acc. to MSS SP 101 Factor 2) Turns for 90 Gearboxes Input shaft Input mounting fl ange for
More informationplanetroll Planetary Gearheads
planetroll Planetary Gearheads www.diequa.com 630-980-1133 Overview Planetary Servo Gearheads by Planetroll German Engineered - Ecomically Priced The Planetdrive series of precision planetary servo gearheads
More informationFlexible Couplings 44
Flexible Couplings 44 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg MTY (81) 83 54 10 18 Why RINGSPANN Flexible Couplings? No connection of shafts without clutches It is a well-known fact
More informationShaft-Hub-Connections
Stand: 14.01.2010 Shaft-Hub-Connections Shrink Discs Cone Clamping Elements Star Discs 36 Edition 2012/2013 RINGSPANN Eingetragenes Warenzeichen der RINGSPANN GmbH, Bad Homburg Table of Contents Introduction
More informationPower Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox.
202 www.powerjacks.com Power Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox. Our expertise has been built on a history of engineering
More informationHousing Freewheels for Multimotor Drives 80.1
s for Multimotor Drives 80.1 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg s FKhG for Multimotor Drives for automatic connecting and disconnecting of drives on pumps, fans, generators etc.
More informationMT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR
MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationFactor 3) Max. input torques Flange 38 GS : F ,000 F10 F ,000 F12 82:
Duty class 1 1) Mor open in accordance with EN 15714-2. Valve output Valve attachment Gearboxes Reduction Facr 3) rque 2) Turns for 90 Gearboxes Input shaft Input mounting flange for multiturn actuar input
More informationBSW , -493, -494 Mechanical Rotary Cam Switches. User's Guide. Mechanical Rotary Cam Switches BSW BSW BSW
BSW 819-492, -493, -494 User's Guide Mechanical Rotary Cam Switches BSW 819-492 BSW 819-493 BSW 819-494 The CE Marking is your guarantee that our products meet the requirements of EC Directive 89/336/EC
More informationChemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant
Chemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant Highly corrosionresistant pumps for absolute aggressive liquids and dangerous liquids. Energy-efficient pumps and chemical pumps Sustainable
More informationDYNA GEAR. The highly dynamic servo right angle gearbox.
MS- Gr a es s ne r GmbH & Co. K G THE GEAR COM PAN Y The highly dynamic servo right angle gearbox Internal highlights The design of the DynaGear range has been influenced by extremely varied applications
More informationGearheads H-51. Gearheads for AC Motors H-51
Technical Reference H-51 for AC Since AC motor gearheads are used continuously, primarily for transmitting power, they are designed with priority on ensuring high permissible torque, long life, noise reduction
More informationStandards Regulations Nomenclature
Standards Regulations Nomenclature Nomenclature Helical worm gear units Sizes 2-stage 3-stage SK 02040 SK 02050 SK 13050 SK 12063 SK 13063 SK 12080 SK 13080 SK 32100 SK 33100 SK 42125 SK 43125 Order examples:
More informationVolute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive. Series CNH-ML
Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive Series CNH-ML Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
More informationA Zy-Tech Global Industries Product
A Zy-Tech Global Industries Product Worm & evel Gear Operators Another quality product from Zy-Tech Global Industries, Inc. Zy-Gear gear operators are designed for long lasting dependable service in oil
More informationБерг АБ Тел. (495) , факс (495)
AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection
More informationNEW. Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm. E03.050e
Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm NEW E03.050e Backlash free positioning Excellent concentricity Quick mounting by central clamping nut Issue
More informationUniversal. CNC Turning machine TNA500 TNA600
Universal CNC Turning machine TNA500 TNA600 TRAUB TNA this name is highly regarded throughout the world for machining large chuck, shaft or bar parts. With their precision and efficiency, short setup time
More informationCatalog. Industrial Gear Units of the MC... Series. Edition 04/2005 D3.B / EN
Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation \ Services Industrial Gear Units of the MC... Series D3.B00 Edition 04/2005 23790 / EN Catalog SEW-EURODRIVE Driving the world
More informationStellantriebe. Classic Line. Electrical Actuators
Stellantriebe Classic Line Electrical Actuators ARIS Stellantriebe GmbH Rotter Viehtrift 7-9 Tel.: +49 (0)2241 25186-0 53842 Troisdorf / Germany Fax: +49 (0)2241 25186-99 www.stellantriebe.de ARIS Stellantriebe
More informationIntelligent Drivesystems, Worldwide Services MODULAR INDUSTRIAL GEAR UNITS
Intelligent Drivesystems, Worldwide Services EN MODULAR INDUSTRIAL GEAR UNITS NORD DRIVESYSTEMS INDUSTRIAL GEAR UNITS Main fields of application n Materials transport (belt, plate, screw & chain conveyors,
More informationTechnical Data Part-turn gearbox 2SP78
Part-turn gearbox 2SP78 Contents Page General data Mounting position, duty classifications, noise level, paint finish and corrosion protection, lubrication, degree of protection, ambient temperature 2
More informationPerformances. Heavy duty, planetary to bevel, right-angle, servo gearbox. Up to 350 Nm rated 9
Up to 350 Nm rated 9 Mra line Heavy duty, planetary to bevel, right-angle, servo gearbox Backlash: from 15 to 5 minutes* Hollow shaft, double shaft or quadri-shaft versions available Efficiency: from 91%
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationAutomatic metal-edge filter AF 71 G
Automatic metal-edge filter AF 71 G with radial scraper cleaning Connection size G1 1 Features MAHLE automatic metal-edge filters are suitable for all applications where low or high-viscosity liquids or
More informationPOWER GEAR. The HighSpeed bevel gearbox.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY POWER GEAR The HighSpeed bevel gearbox HS www.graessner.de Nothing but highlights! Designed for special requirements no adaption, no compromises: There are decades
More informationOperating and Maintenance Instructions. Abteilung TB, Schell Seite 1 8 SERIES 56
Abteilung TB, Schell Seite 1 8 These instructions supersede all earlier instructions, in particular BWS 109-0 till BWS 109-3. For applications in areas with explosion hazard it is obligatory to observe
More informationThe Available Solution
The Available Solution ISO 02 NATIONAL ACCREDITATION QUALITY ASSURED OF CERTIFICATION FIRM BODIES POWER TRANSMISSION & CONTROLS GROUP ISO 14001 CERTIFICATION We have achieved ISO 14001 for environmental
More information1/2/2015 2:04 PM. Chapter 13. Gears General. Dr. Mohammad Suliman Abuhaiba, PE
Chapter 13 Gears General 1 2 Chapter Outline 1. Types of Gears 2. Nomenclature 3. Conjugate Action 4. Involute Properties 5. Fundamentals 6. Contact Ratio 7. Interference 8. The Forming of Gear Teeth 9.
More informationBrushless Flat DC-Micromotors
Flat DC-Micromotors 7 Flat DC-Micromotor End cap Ball bearing Hall Sensor PCB Rotor and output shaft Stator Coil Rotor, Back-Iron and Magnet 7 Ball bearing Housing Features The heart of each brushless
More informationHigh Precision Planetary Gearheads. MTY (81) MEX (55) QRO (442) DIST.
High Precision Planetary Gearheads Page 1 Pages 2-3 Applications Features Page 4 Page 5-10 PL2 Series Page 11-16 PR2 Series Page 17-22 PL6 Series Page 23-28 PR6 Series Selection Guide Boston gearheads
More informationT 8321 EN Type 3278 Pneumatic Rotary Actuator
T 8321 EN Type 3278 Pneumatic Rotary Actuator Application Single-acting pneumatic diaphragm rotary actuator for butterfly valves and other final control elements with rotary closure members. Suitable for
More informationSiemens AG SIMOTICS T-1FW3 Torque Motors. The Powerful Torque Motors. Edition February Brochure. siemens.
SIMOTICS T-1FW3 Torque Motors The Powerful Torque Motors Brochure Edition February 2017 siemens.com/torquemotors The powerful torque motors Overview The right torque at the right moment this is decisive
More informationELA Electromechanical Linear Actuators
ELA Electromechanical Linear Actuators D Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of a completely enclosed aluminium housing with worm gearing and axial bearing
More informationFlexible Couplings N-BIPEX Series
Flexible Couplings Series /2 Overview /2 Benefits /2 Application /3 Function /3 Design /4 Technical specifications /6 Type BWN /6 Selection and ordering data /7 Spare and wear parts /7 Selection and ordering
More informationMaxifluss Rotary Plug Valves VETEC Types 72.3/R and 72.4/R
Maxifluss Rotary Plug Valves VETE Types 72.3/R and 72.4/R Application Double-eccentric control valve for process engineering and industrial applications Nominal sizes DN 25 to 400 NPS 1 to 1 Nominal pressures
More informationTRADITIONAL SHAFT HUB CONNECTIONS
TABLE OF CONTENTS MAV locking devices.... Pg. 2 Traditional shaft hub connections...pg. 3 Advantages of MAV locking devices...pg. 4 The wedge principle..... Pg. 5 Installation removal...pg. 6 Characteristics....
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Contents Contents Page PGP/PGM500 Characteristics... 3 PGP502 Ordering... 4 PGP502 Performance curves... 5
More informationINTELLIGENT DRIVE SYSTEMS, WORLDWIDE SERVICES INTELLIGENT DRIVESYSTEMS, WORLDWIDE SERVICES
INTELLIGENT DRIVE SYSTEMS, WORLDWIDE SERVICES INTELLIGENT DRIVESYSTEMS, WORLDWIDE SERVICES EN DRIVE SOLUTIONS FOR SEWAGE PLANTS NORD DRIVESYSTEMS Intelligent Drivesystems, Worldwide Services NORD DRIVE
More informationGEAR CONTENTS POWER TRANSMISSION GEAR TYPES OF GEARS NOMENCLATURE APPLICATIONS OF GEARS VELOCITY RATIO GEAR TRAINS EXAMPLE PROBLEMS AND QUESTIONS
GEAR CONTENTS POWER TRANSMISSION GEAR TYPES OF GEARS NOMENCLATURE APPLICATIONS OF GEARS VELOCITY RATIO GEAR TRAINS EXAMPLE PROBLEMS AND QUESTIONS GEAR.. Power transmission is the movement of energy from
More informationTapered Roller Bearings. Reliable energy efficient suitable for high loads
Tapered Roller Bearings Reliable energy efficient suitable for high loads Tapered roller bearings a premium product from FAG Tapered roller bearings are characterized by high radial and axial load carrying
More informationShaft Couplings. Edition 2015/2016. Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Tru-Line Flange-Couplings
More informationMTB 42 Belt Driven Linear Actuator
LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features
More informationMaalonDrive. Space 8mm - Type 2. Technical Supply Specifications: MaalonDrive Space 8mm - Type 2. Attributes. Technical parameter.
MaalonDrive Space 8mm - Type 2 Attributes Highlights Description High repeatability Dry lubrication due to coatings Zero backlash with optimised fit between speed and resolution Worm gear integrated on
More informationELECTROMAGNETIC CLUTCH AND BRAKE UNITS
-ACTUATED CLUTCHES AND BRAKES CLUTCH AND BRAKE UNITS Application Printing machinery, bookbinding machinery, woodworking machinery, semiconductor manufacturing equipment Connection and Release, Required
More informationRE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles
RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class
More informationCLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE
CLAMPING ELEMENTS The clamping system connects one or two component parts solidly to the drive shaft, which allow motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps
More informationSpiral Bevel Gearboxes Type BG. General. 1. Construction Features. 2. Lubrication
Spiral Bevel Gearboxes Type BG General Spiral bevel gearboxes BG incorporate the most modern advances in bevel gearbox design and construction. These gearboxes offer an extensive range of ratios together
More information12/6/2013 9:09 PM. Chapter 13. Gears General. Dr. Mohammad Suliman Abuhaiba, PE
Chapter 13 Gears General 1 2 Chapter Outline 1. Types of Gears 2. Nomenclature 3. Conjugate Action 4. Involute Properties 5. Fundamentals 6. Contact Ratio 7. Interference 8. The Forming of Gear Teeth 9.
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel fully
More informationControl devices MA and EM
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Control devices MA and EM RE 9 07/.05 /6 Replaces: 05.9 Technical data sheet for the variable pumps A4VSO
More informationUNIT III TRANSMISSION SYSTEMS CONTENTS: Clutch-types and construction Gear boxes- manual and automatic Gear shift mechanisms Over drive Transfer box
UNIT III TRANSMISSION SYSTEMS CONTENTS: Clutch-types and construction Gear boxes- manual and automatic Gear shift mechanisms Over drive Transfer box Fluid flywheel Torque converter Propeller shaft Slip
More informationSpindle Gear Manual. Gears and linear products since 1964
Spindle Gear Manual /// Page 2 Design of the spindle gear /// Page Mounting instructions /// Page Operating instructions and choice of oil /// Page 6 Unique gear number /// Page 7 Spare parts diagram ///
More informationThe two RENK LABECO test stands are intended to provide endurance and acceptance testing for both R&D and post-assembly quality assurance.
October, 200 RENK LABECO Test Systems Corporation Supports Largest Wind Turbine Test Facility with October 28th Groundbreaking at Clemson University Restoration Institute RENK LABECO Test Systems Corporation
More informationDouble-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationPerformances. Standard range dedicated to servo-applications requiring precision, robustness and economy. Up to 290 Nm rated 6
RATIO GROUP A: 1 stage, i = 4-5 - 7-10 2 stages, i = 16-20 - 25-28 - 35-40 - 49-50 - 70-100 RATIO GROUP B: 1 stage, i = 3-4 - 5-7 - 10 2 stages, i = 12-15 - 16-20 - 21-25 - 28-35 - 40-49 - 50-70 - 100
More informationantriebstechnik ELA Electromechanical Linear Actuator
D antriebstechnik ELA Electromechanical Linear Actuator Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of trapezoidal or ball screws driven by an electric motor
More information1 Article designation
Order code LTi synchronous motors LSx Example LSH07410560 1 Article designation LS LTi synchronous motor series T or H 074 1 0 560 / T H Edge measurement of motor in mm (not the flange measurement) 050
More informationChapter 3. Transmission Components
Chapter 3. Transmission Components The difference between machine design and structure design An important design problem in a mechanical system is how to transmit and convert power to achieve required
More informationAutomatic metal-edge filters AF 72 G
Automatic metal-edge filters AF 72 G with radial scraper cleaning Connection size G1 1/2, flange DN 40 1 Short description MAHLE automatic metal-edge filters are suitable for all applications where low
More informationUhing Lineartriebe Uhing Linear Drives. Rollringgetriebe Rolling Ring Drives. Zahnriemenantriebe Timing Belt Drive
Uhing Lineartriebe Uhing Linear Drives Rollringgetriebe Rolling Ring Drives Führungssytem Guide System Wälzmutter Linear Drive Nut Zahnriemenantriebe Timing Belt Drive Klemm- und Spannelemente Clamping
More informationPRODUCT OVERVIEW HIGHEST PRECISION
PRODUCT OVERVIEW If you need high precision gear reducers at a reasonable cost and you value innovation and excellent service, take a close look at our product line. You ll find a wide range of products
More informationShaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Table of Contents Tru-Line Flange-Couplings
More informationKTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
More informationAddendum to the Operating Instructions
Drive Technology \ Drive Automation \ System Integration \ Services *25821946_0918* Addendum to the Operating Instructions Gear Unit Series R..7, F..7, K..7, K..9, S..7, SPIROPLAN W TorqLOC Plus Hollow
More informationhydraulic actuated products EP: EP:
In-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide hydraulic actuated products EP: 0 812 397 EP: 1 666 748 Overview Hydraulic shrink disc SHS Standard
More informationAKG-A/AKGS-A Type Series Booklet
Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,
More information1 Article designation
Order code LTi synchronous motors LSx Example LSH07410560 1 Article designation LS LTi synchronous motor series T or H 074 1 0 560 / T H Edge measurement of motor in mm (not the flange measurement) 050
More informationHighly Efficient, Grease Lubricated, Compact Design. Hypoid gearing delivers efficiencies up to 85% and smooth, quiet operation
Highly Efficient, Grease Lubricated, Compact Design Grease lubricated design is maintenance free, requires no oil changes and is up to 85% efficient across all ratios Hypoid gearing delivers efficiencies
More informationGear Drives. A third gear added to the system will rotate in the same direction as the drive gear Equal diameters = Equal number of teeth = Same speed
Gear Drive Systems Gear Drives Gear Drive: Synchronous mechanical drive that uses gears to transfer power Gear: A toothed wheel that meshes with other toothed wheels to transfer rotational power Pinion
More informationBEVELGEAR. Competence and Performance.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY BEVELGEAR Competence and Performance General Advantages of Spiral, Hypoid and Zerol Bevel Gears High level of coverage due to the fact that several teeth are
More informationProduct overview visit for more details
Product overview visit www.parvalux.com for more details DC brushless (PBL) DC permanent magnet (PM) AC induction (SD) motors only Type Code Shaft Orientation Power (Watts)* Speed (rpm) Torque (Nm)** Power
More informationMotors and Gearboxes for Warehouse Logistics. Energy efficient Compact Sustainable
Motors and Gearboxes for Warehouse Logistics Energy efficient Compact Sustainable High-quality drive unit solutions for warehouse logistics Efficient system solutions from one single source for high performance
More informationSeries J Shaft Mounted Gearbox
Series J Shaft Mounted Gearbox Technical Up to - 600kW / 57,000 Nm Industrial Gearbox CJ-2.00GBA1211 PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food, energy,
More informationForce Limiters 49. RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg
Force Limiters 49 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Why RINGSPANN Force Limiters? Why RINGSPANN Force Limiters? There are many ways of transmitting forces and torques in machines,
More informationGearmotors \ Industrial Gear Units \ Drive Engineering \ Drive Automation \ Services. Gearmotors A3.D01. Catalog. Edition 04/ / EN
Gearmotors \ Industrial Gear Units \ Drive Engineering \ Drive Automation \ Services Gearmotors A3.D0 Edition 04/2004 22560 / EN Catalog SEW-EURODRIVE Driving the world Contents The SEW-EURODRIVE Group
More information