Factor 3) Max. input torques Flange 38 GS : F ,000 F10 F ,000 F12 82:

Transcription

1 Duty class 1 1) Mor open in accordance with EN Valve output Valve attachment Gearboxes Reduction Facr 3) rque 2) Turns for 90 Gearboxes Input shaft Input mounting flange for multiturn actuar input rques according [mm] [mm] [kg] GS : ,000 51: GS ) F12 82: ,000 F12 53: GS ,500 5) 82: ,000 52: () /() 33 2,800 5) 107: () GS : , :1 7) :1 7) : , :1 7) () /() 90 GS :1 7) () 143 6) 8:1 7) /(30) () ,000 28,000 56, GS ) 125 GS 0.3 F40 6) F GS F48 6) 54: () :1 7) /() () :1 7) :1 7) : () 1, :1 7) :1 7) /() () :1 7) ,752:1 7) : () 2, :1 7) /(30) () :1 7) :1 7) /() () 213 1,718:1 7) /(30) Duty class 2 1) Mor open for infrequently operated valves (max. 1,000 cycles) Valve output Valve attachment Gearboxes Reduction Facr 3) rque 2) 625 1,250 2,0 5,000 10,000 17,500 Turns for 90 Gearboxes Input shaft Input mounting flange for multiturn actuar input rques according [mm] [mm] [kg] 38 GS : GS : F F12 60 GS : GS GS ) 100 GS ) 52: /() () :1 7) :1 7) :1 7) : :1 7) /() () 160:1 7) :1 7) () : () :1 7) /() () :1 7) :1 7) ) 8) Refer notes on page 3. Y /003/en Issue 2.15 Page 1/7

2 Valve output Valve attachment Gearboxes Reduction Facr 3) rque 2) 35,000 70,000 according Turns for 90 Gearboxes Input shaft Input mounting flange for multiturn actuar input rques [mm] [mm] [kg] 53: () :1 7) :1 7) /() () :1 7) ,752:1 7) : () 3, :1 7) /(30) () :1 7) :1 7) /() () 266 1,718:1 7) GS 0.3 F40 6) F GS F48 6) Duty class 3 1) Manual open in accordance with EN (max. 250 cycles) output rque 2) Valve attachment Gearboxes Reduction 750 according Facr 3) Input shaft input rques Handwheel Ø 8) Manual force [mm] [mm] [mm] [N] [kg] GS : : GS : GS : /() :1 7) GS :1 7) , ) F12 82: ,000 F12 1,500 5) 82: ,000 2,800 5) 107: ,000 12,000 17,500 35,000 70, GS ) 100 GS 160:3 6) 125 GS 0.3 F40 6) F GS F48 6) 30 8:1 7) :1 7) /() :1 7) :1 7) :1 7) /() :1 7) :1 7) :1 7) /() :1 7) ,752:1 7) :1 7) /() ,718:1 7) ) 8) Refer notes on page 3. Y /003/en Issue 2.15 Page 2/7

3 General information For mor or manual open of valves (e.g. butterfly valves, ball and plug valves). For special applications, e.g. dampers, gas diverters, flue gas dampers, ggle arm driven diverters and guillotine isolars, special sizing is required. Special technical data apply for special applications. Available special applications on request. Notes table on pages ) Duty class For further information on lifetime, refer "Lifetime for mor open" and "Lifetime for manual open" on page 6. Duty class 3 can exclusively be used for manual open. Please refer page 2 for the pertaining handwheel size. 2) output rque For a swing angle up max ) Facr Conversion facr from output rque input rque for actuar size definition When new, the transmission facr can fall short of the indicated value by up 10%. 4) Weight Indicated weight includes unfinished coupling and grease filling in the gear housing. Type GS GS GS 0.3 GS Extension flange F40 F48 Additional weight [kg] ) Toothing does not allow for higher loads. 6) Screwed and doweled housing by means of extension flange. 7) Equipped with primary reduction gearing or planetary gearing reduce input rques. 8) Available handwheel diameters in accordance with EN Features and functions Worm wheel material Spheroidal cast iron Version Clockwise rotation RR, counterclockwise rotation LL as an option RL or LR Housing material Cast iron (GJL-250) Spheroidal cast iron (GJS ) Self-locking End sps Strength of end sp The gearboxes are self-locking when at standstill under normal service conditions; strong vibn may cancel the self-locking effect. While in motion, safe braking is not guaranteed. If this is required, a separate brake must be used. Positive for both end positions by travelling nut, sensitive adjustment Guaranteed strength of end sp (in Nm) for input side open Type GS 50.3 GS 63.3 GS 80.3 GS Reduction 51:1 51:1 53:1 52:1 126:1 160:1 8: Type GS GS Reduction 52:1 126:1 160:1 8:1 54:1 218:1 442:1 880:1 1, , Type GS 0.3 GS Reduction 53:1 214:1 434:1 864:1 1752:1 52:1 210:1 411:1 848:1 1718:1 8,000 2,000 1, ,000 2,000 1, Swing angle GS 50.3 GS Fixed swing angle between 10 and max. 100 ; set in the facry 92 unless ordered otherwise. Adjustable in steps of: 10 35, 35 60, 60 80, , , , , Swing angle > 190, refer Technical data GS 50.3 GS for modulating duty and shorter operating times Y /003/en Issue 2.15 Page 3/7

4 Swing angle GS GS Adjustable ; set in the facry 92 unless ordered otherwise. Adjustable in steps of: 0, 40, 40 60, 60 80, , , , , Swing angle > 190, refer Technical data GS 50.3 GS for modulating duty and shorter operating times Mechanical position indicar Pointer cover for continuous position indication Sealed pointer cover for horizontal outdoor installation (not available for GS 50.3) Protection cover for buried services instead of pointer cover (without mechanical position indicar) Sealed pointer cover with air vent, not available for GS 50.3 Observe notes on Information sheet Enclosure protection IP68 for part-turn gearboxes Input shaft Cylindrical with parallel key according DIN (refer table on pages 1 and 2) Open Mor open Type of duty Maximum permissible input speeds and operating times Via electric multi-turn actuar Input mounting flanges for multi-turn actuar (refer table pages 1 and 2) Short-time duty S2-15 min Class A according EN : OPEN-CLOSE Class B according EN : Inching/positioning or positioning duty Type GS 50.3 GS 63.3 GS 80.3 GS Reduction 51:1 51:1 82:1 53:1 82:1 52:1 107:1 126:1 160:1 280:1 permissible input speed [rpm] Fastest operating time for 90 [s] Type GS GS Reduction 52:1 126:1 160:1 8:1 54:1 218:1 442:1 880:1 permissible input speed [rpm] Fastest operating time for 90 [s] Type GS 0.3 GS Reduction 53:1 214:1 434:1 864:1 1,752:1 52:1 210:1 411:1 848:1 1,718:1 permissible input speed [rpm] Fastest operating time for 90 [s] Shorter operating times can be achieved with worm wheels made of bronze, refer Technical data GS 50.3 GS for modulating duty and shorter operating times. Due gear oth geometry and the material characteristics of bronze, worm gearboxes with a worm wheel made of bronze can transmit lower rques Calculation of operating time for a 90 swivel movement: Oper. time for 90 [s] = Reduction [i] n [input speed in rpm] 15 Calculation of the operating time for a swivel movement θ [ ]: Swing angle θ [ ] 6 Y /003/en Issue 2.15 Page 4/7

5 Manual open Handwheel made of aluminium with electrophoretic coating Handwheel with ball handle Handwheel made of GJL-0 with electrophoretic coating and painting Handwheel lockable WSH for signalling position and end positions Deflection of the input shaft Deflection 90 deflection of the input shaft Combination with GK bevel gearbox directly mounted on GS or planetary stage possible, refer Mounting positions Part-turn gearboxes with multi-turn actuars Base and lever Not suitable for load class 3. Base Lever Ball joints Made of spheroidal cast iron; for mounting base, 4 holes for fastening screws are available. Made of spheroidal cast iron; with 2 or 3 bores for fixing lever arrangement. Considering the environmental conditions, the lever may be mounted the output shaft in any desired position. Two ball joints matching the lever, as an option including lock nuts and 2 welding nuts; suitable for pipe according dimension sheet Mechanical position indicar No position indicar (protection cover) Pointer cover instead of protection cover for continuous position indication Valve attachment Valve attachment Dimensions according : The maximum rques of mounting flanges according are be met. Spigot Bore for locating pins (option) s with spigot, recess or plane flanges are available. Up GS 125.3, spigots are implemented by means of spigot rings. From GS GS 250.3, recesses and spigots are directly integrated in the housing. Two bore for locating pins shifted by 180. The locating pins are not included in the scope of delivery. Type GS 80.3 GS GS GS according F12 Housing material GJS GJS GJS GJS GJL GJL GJL GJL GJL GJL Type GS 0.3 GS according F40 F40 F48 Housing material GJL GJL GJL GJL GJL GJL Refer dimension drawing U Further pitch circle diameters and bore depths for locating pins on request. Splined coupling for connection the valve shaft Without bore or pilot bore from GS Worm gearbox can be mounted on coupling Finish machining with bore and keyway, square bore or two-flat with grub screw for secure fixing valve shaft. Service conditions Mounting position Any position Ambient temperature 40 C +80 C 60 C +60 C 0 C +1 C Enclosure protection according EN IP68, dust-tight and water-tight up max. 8 m head of water IP68-, dust-tight and water-tight up max. m head of water Y /003/en Issue 2.15 Page 5/7

6 Corrosion protection GS 50.3 GS 80.3: KS GS GS 250.3: KN KN KS KX GS 50.3 GS 80.3: KX GS GS 250.3: KS/KX Suitable for installation in industrial units, in water or power plants with a low pollutant concentn Suitable for use in areas with high salinity, almost permanent condensation, and high pollution. Suitable for use in areas with extremely high salinity, permanent condensation, and high pollution. Top coat GS 50.3 GS 80.3: GS GS 250.3: Powder coating Two-component iron-mica combination Colour AUMA silver-grey (similar RAL 7037) Available colours on request AUMA load spectrum Torque Peak load (max. output rque) Mean load (basic load) 35 % 0 % 35 % 0 9 Swivel movement 90 Swing angle AUMA worm gearboxes meet or exceed the lifetime requirements of EN Lifetime for mor open in accordance with AUMA load profile Duty class 1: Lifetime for 90 swivel movement Meets the lifetime requirement of EN Gearbox size GS 50.3/ GS 63.3 Number of cycles for max. rque GS 80.3/ GS100.3 GS GS 0.3 GS ,000 5, ,0 Lifetime for larger swing angle on request Duty class 2: Lifetime for 90 swivel movement for valves which are infrequently operated. Gearbox size GS 50.3/ GS 63.3 GS 80.3/ GS100.3 GS GS 0.3 GS Number of cycles for max. rque 1,000 Lifetime for larger swing angle on request Lifetime for manual open Duty class 3: Meets the lifetime requirement of EN Limit sensing for signalling position and end positions Valve position indicars WSG valve position indicar (hall sensors) for position and end position signalling ensure precise and low-backlash feedback for swing angles ranging between 82 and 98. WGD valve position indicar (counter gear mechanism) for position and end position signalling for swing angles > 180 Y /003/en Issue 2.15 Page 6/7

7 Special features for use in potentially explosive atmospheres in accordance with ATEX 94/9/EC Type of duty Maximum 3 cycles (OPEN - CLOSE - OPEN) in accordance with AUMA load profile (90 swivel movement) and maximum permissible input speeds, or with mean constant output rques according table: Gearbox size GS 50.3 GS 63.3 GS 80.3 GS GS Reduction - 51:1 82:1 53:1 82:1-107:1 - Average output rque , ,000 1,400 4,000 Ambient temperature Duty classes 1 and 3 Gearbox size GS GS 0.3 GS Average output rque 8,000 16,000 32, C +60 C (II2G c IIC T4; II2D c T130 C) 60 C +60 C (II2G c IIC T4; II2D c T130 C) 40 C +40 C (II2G c IIC T4; II2D c T130 C) 40 C +80 C (II2G c IIC T3; II2D c T190 C) 0 C +1 C (II2G c IIC T3; II2D c T190 C) C +40 C (IM2 c) Duty class 2 40 C +60 C (II2G c IIC T3; II2D c T190 C); T4 on request with individual test 60 C +40 C (II2G c IIC T4; II2D c T130 C) 60 C +60 C (II2G c IIC T3; II2D c T190 C); T4 on request with individual test 40 C +40 C (II2G c IIC T4; II2D c T130 C) 40 C +80 C (II2G c IIC T3; II2D c T190 C) C +40 C (IM2 c) Further temperature classes or loads exceeding the average rque of the AUMA load profile on request. Further information EU Directives Reference documents ATEX Directive: (94/9/EC) Machinery Directive: (06/42/EC) Product description Electric actuars for industrial valve aumation Dimensions GS 50.3 GS 125.3, GS GS Technical data SA 07.2 SA 16.2 with 3-phase AC mors Technical data WSG 90.1 Technical data WGD 90.1 Technical data WSH 10.2 WSH 16.2 Technical data Part-turn gearboxes Operating times for different reduction s and input speeds Information sheet Enclosure protection IP68 for part-turn gearboxes Y /003/en Issue 2.15 Page 7/7