EO Weld Fittings. Weld Fittings. Permissible temperature range: Materials and surface protection: Fitting assembly:
|
|
- Heather Chambers
- 5 years ago
- Views:
Transcription
1 EO Weld Fittings EO weld nipple fittings with an seal between weld nipple and fitting body give impressive tear out resistance and sealing integrity. Weld nipples SKA conform with EO IN 3865 form A. Fitting bodies and nuts are fully interchangeable for weld nipple and for EO-2/progressive ring fittings of the same series and external tube diameter. Materials and surface protection: Steel phosphated and oiled, of NBR (e.g. Perbunan). Stainless steel , of FPM (e.g. Viton) Welding suitability and weldability Weld nipples, tube bend weld nipples and ASK types made of steel are weldable according. to usual techniques. Types made of (stainless) are suitable for arc welding. The welding filler should be selected in accordance with IN 8556 part 1 with consideration of the type of application and the welding technique. Tube recommendation We recommend the use of EO tubes in steel and stainless steel as illustrated in this catalogue. Permissible temperature range: For weld nipples, tube bends with weld nipples and ASK types of steel with s of NBR (e.g. Perbunan): 35 C to C FPM (e.g.viton): 25 C to C without pressure reductions. For temperature range and necessary pressure reductions for weld nipples, weld nipple fittings and ASK types of , see corresponding page. Fitting assembly: 1. Cut off the tube square, deburr and bevel the end of the tube in conformance with IN Slide nut onto the weld nipple. 3. Weld nipple to the tube according to normal welding procedure. The tube and nipple must be aligned. Before welding, please remove the EO-2 nut. 4. ress the weld on the inside and outside. 5. Fit the without twisting. The taper, the nut and the cone must all be clean. 6. Oil the nut, taper and cone and thread before assembly. 7. Screw on the nut by hand. Fully tighten using a spanner with 1 / 4 to 1 / 2 turns. Make sure that the tube with the weld nipple is assembled straight and without in built stress. Nominal Pressure (PN) of complete weld nipple fittings The nominal working pressure (PN) of a complete weld nipple fitting is dependant upon the least rated component, i.e. tube, weld nipple or fitting. The component out of these three with the lowest rated pressure or working pressure determines the nominal pressure (PN) of the complete fitting. E4
2 AS Weld Connector EO tube end / Butt Weld S 1 S 2 60 d 8 l 1 Series Tube PN P max l 1 S 1 S 2 d 8 Weight O.. (bar) (bar) gr./1 piece S E Series Tube ry Technology ry Technology O.. EO-2 steel PR steel EO-2 stainless steel PR stainless steel 06 AS06Z AS06 AS06Z71 AS AS08Z AS08 AS08Z71 AS AS10Z AS10 AS10Z71 AS AS12Z AS12 AS12Z71 AS AS15Z AS15 AS15Z71 AS AS18Z AS18 AS18Z71 AS AS22Z AS22 AS22Z71 AS AS28Z AS28 AS28Z71 AS AS35Z AS35 AS35Z71 AS AS42Z AS42 AS42Z71 AS4271 S 06 AS06ZS AS06S AS06ZS71 AS06S71 08 AS08ZS AS08S AS08ZS71 AS08S71 10 AS10ZS AS10S AS10ZS71 AS10S71 12 AS12ZS AS12S AS12ZS71 AS12S71 14 AS14ZS AS14S AS14ZS71 AS14S71 16 AS16ZS AS16S AS16ZS71 AS16S71 20 AS20ZS AS20S AS20ZS71 AS20S71 25 AS25ZS AS25S AS25ZS71 AS25S71 30 AS30ZS AS30S AS30ZS71 AS30S71 38 AS38ZS AS38S AS38ZS71 AS38S71 Without nut and ring: Example AS06X AS06X AS0671X AS0671X E5
3 WAS Weld Elbow EO tube end / Butt Weld S 3 S I 2 2 Series Tube PN P max 2 I 2 3 S 2 S 3 8 Weight O.. (bar) (bar) gr./1 piece S Series Tube ry Technology O.. PR steel EO-2 steel 06 WAS06 WAS06Z 08 WAS08 WAS08Z 10 WAS10 WAS10Z 12 WAS12 WAS12Z 15 WAS15 WAS15Z 18 WAS18 WAS18Z 22 WAS22 WAS22Z 28 WAS28 WAS28Z 35 WAS35 WAS35Z 42 WAS42 WAS42Z S 06 WAS06S WAS06ZS 08 WAS08S WAS08ZS 10 WAS10S WAS10ZS 12 WAS12S WAS12ZS 14 WAS14S WAS14ZS 16 WAS16S WAS16ZS 20 WAS20S WAS20ZS 25 WAS25S WAS25ZS 30 WAS30S WAS30ZS 38 WAS38S WAS38ZS Without nut and ring: Example WAS06X WAS06X E6
4 ESV Weld Bulkhead Fitting EO tube end / EO tube end Series Tube PN P max l 1 S 2 d 8 Weight O.. (bar) (bar) gr./1 piece S S 2 d 8 I 1 E Series Tube ry Technology ry Technology O.. EO-2 steel PR steel EO-2 stainless steel PR stainless steel 06 ESV06Z ESV06 ESV06Z71 ESV ESV08Z ESV08 ESV08Z71 ESV ESV10Z ESV10 ESV10Z71 ESV ESV12Z ESV12 ESV12Z71 ESV ESV15Z ESV15 ESV15Z71 ESV ESV18Z ESV18 ESV18Z71 ESV ESV22Z ESV22 ESV22Z71 ESV ESV28Z ESV28 ESV28Z71 ESV ESV35Z ESV35 ESV35Z71 ESV ESV42Z ESV42 ESV42Z71 ESV4271 S 06 ESV06ZS ESV06S ESV06ZS71 ESV06S71 08 ESV08ZS ESV08S ESV08ZS71 ESV08S71 10 ESV10ZS ESV10S ESV10ZS71 ESV10S71 12 ESV12ZS ESV12S ESV12ZS71 ESV12S71 14 ESV14ZS ESV14S ESV14ZS71 ESV14S71 16 ESV16ZS ESV16S ESV16ZS71 ESV16S71 20 ESV20ZS ESV20S ESV20ZS71 ESV20S71 25 ESV25ZS ESV25S ESV25ZS71 ESV25S71 30 ESV30ZS ESV30S ESV30ZS71 ESV30S71 38 ESV38ZS ESV38S ESV38ZS71 ESV38S71 Without nut and ring: Example ESV06X ESV06X ESV0671X ESV0671X E7
5 SKA Weld nipple 24 Series Tube Seamless PN P max Weight O.. steel tube (bar) (bar) Shore-Hardness gr./1 piece St approx. 90 /S OR4.5X1.5X OR6.5X1.5X OR6.5X1.5X OR8.0X1.5X OR8.0X1.5X OR8.0X1.5X OR10.0X1.5X OR10.0X1.5X OR10.0X1.5X OR12.0X2.0X OR12.0X2.0X OR15.0X2.0X OR20.0X2.0X OR26.0X2.0X OR26.0X2.0X OR32.0X2.5X OR32.0X2.5X OR38.0X2.5X OR38.0X2.5X 190 S OR11.0X2.0X OR11.0X2.0X OR13.0X2.0X OR13.0X2.0X OR13.0X2.0X OR13.0X2.0X OR16.3X2.4X OR16.3X2.4X OR16.3X2.4X OR16.3X2.4X OR16.3X2.4X OR20.3X2.4X OR20.3X2.4X OR20.3X2.4X OR20.3X2.4X OR25.3X2.4X OR25.3X2.4X OR25.3X2.4X OR25.3X2.4X OR33.3X2.4X OR33.3X2.4X OR33.3X2.4X OR33.3X2.4X OR33.3X2.4X 303 FPM (e. g. Viton): Example OR4.5X1.5VITX E8
6 SKA Weld nipple 24 Series Tube O.. Steel Stainless steel /S 06 SKA06X1.5 SKA06X SKA08X1.5 SKA08X SKA08X2 SKA08X SKA10X1 10 SKA10X1.5 SKA10X SKA10X2 SKA10X SKA12X1.5 SKA12X SKA12X2 SKA12X SKA12X2.5 SKA12X SKA15X SKA15X2.5 SKA15X SKA18X2.5 SKA18X SKA22X2.5 SKA22X SKA28X SKA28X3 SKA28X SKA35X3.5 SKA35X SKA35X SKA42X SKA42X4 SKA42X471 S 14 SKA14X2 SKA14X SKA14X3 SKA14X SKA16X SKA16X2 SKA16X SKA16X2.5 SKA16X SKA16X3 SKA16X SKA20X2 SKA20X SKA20X2.5 SKA20X SKA20X3 SKA20X SKA20X SKA20X4 SKA20X SKA25X3 SKA25X SKA25X SKA25X4 SKA25X SKA25X5 SKA25X SKA30X3 SKA30X SKA30X4 SKA30X SKA30X5 SKA30X SKA30X6 SKA30X SKA38X SKA38X4 SKA38X SKA38X5 SKA38X SKA38X6 SKA38X SKA38X7 SKA38X771 Without nut and ring: Example AS06X AS06X AS0671X AS0671X E E9
7 SKAR Reducing weld nipple Fig. A Fig. B d 2 d 1 2 l Series Tube O.. PN P ma d 1 d 2 I Fig. Shore- Weight 2 (bar) (bar) Hardness approx. 90 gr./1 piece and A OR6.5X1.5X 14 S B OR8.0X1.5X A OR8.0X1.5X A OR8.0X1.5X A OR10.0X1.5X B OR10.0X1.5X A OR10.0X1.5X 18 S A OR13.0X2.0X A OR13.0X2.0X A OR13.0X2.0X A OR13.0X2.0X A OR13.0X2.0X A OR16.3X2.4X A OR16.3X2.4X A OR16.3X2.4X B OR16.3X2.4X A OR16.3X2.4X A OR16.3X2.4X A OR16.3X2.4X A OR20.3X2.4X A OR20.3X2.4X A OR20.3X2.4X B OR20.3X2.4X A OR20.3X2.4X A OR20.3X2.4X A OR20.3X2.4X A OR20.3X2.4X A OR20.3X2.4X A OR20.3X2.4X A OR20.3X2.4X B OR25.3X2.4X B OR25.3X2.4X B OR25.3X2.4X A OR25.3X2.4X B OR25.3X2.4X A OR25.3X2.4X A OR25.3X2.4X A OR25.3X2.4X A OR25.3X2.4X A OR25.3X2.4X A OR25.3X2.4X A OR25.3X2.4X B OR33.3X2.4X B OR33.3X2.4X B OR33.3X2.4X A OR33.3X2.4X B OR33.3X2.4X B OR33.3X2.4X B OR33.3X2.4X B OR33.3X2.4X B OR33.3X2.4X B OR33.3X2.4X A OR33.3X2.4X A OR33.3X2.4X B OR33.3X2.4X A OR33.3X2.4X A OR33.3X2.4X A OR33.3X2.4X 316 FPM (e. g. Viton): Example OR6.5X1.5VITX E10
8 d 2 Weld Fittings SKAR Reducing weld nipple Fig. A Fig. B d 1 2 l Series Tube O.. Steel Stainless steel and SKAR08/06X1.571 S SKAR10/06X1.5 SKAR10/06X SKAR10/08X SKAR10/08X2 SKAR10/08X SKAR12/08X SKAR12/08X2 SKAR12/08X SKAR12/10X1.5 SKAR12/10X1.571 S SKAR16/10X2 SKAR16/10X SKAR16/12X SKAR16/12X SKAR16/12X2.5 SKAR16/12X SKAR16/12X SKAR20/12X SKAR20/12X SKAR20/12X2.5 SKAR20/12X SKAR20/12X SKAR20/16X SKAR20/16X SKAR20/16X3 SKAR20/16X SKAR25/12X SKAR25/12X SKAR25/12X2.5 SKAR25/12X SKAR25/12X SKAR25/16X SKAR25/16X SKAR25/16X3 SKAR25/16X SKAR25/20X2 SKAR25/20X SKAR25/20X SKAR25/20X SKAR25/20X4 SKAR25/20X SKAR30/12X SKAR30/12X SKAR30/12X SKAR30/16X2 SKAR30/16X SKAR30/16X SKAR30/20X SKAR30/20X2.5 SKAR30/20X SKAR30/20X SKAR30/20X SKAR30/25X SKAR30/25X3 SKAR30/25X SKAR30/25X SKAR38/12X SKAR38/12X SKAR38/12X SKAR38/16X2 SKAR38/16X SKAR38/16X SKAR38/16X SKAR38/20X SKAR38/20X2.5 SKAR38/20X SKAR38/20X SKAR38/20X SKAR38/25X SKAR38/25X3 SKAR38/25X SKAR38/25X SKAR38/30X SKAR38/30X4 SKAR38/30X SKAR38/30X571 E E11
9 ASK Weld fitting ASK steel is non-standard. Alternative standard product: Union G (page C8) with weld nipples SKA (pages E8/E9) both ends. S 1 S 2 Series Tube Seamless PN P max S 1 S 2 Weight O.. steel tube (bar) (bar) Shore-Hardness gr./1 piece approx. 90 S OR8.0X1.5X OR8.0X1.5X OR8.0X1.5X OR10.0X1.5X OR10.0X1.5X OR10.0X1.5X OR13.0X2.0X OR13.0X2.0X OR13.0X2.0X OR13.0X2.0X OR16.3X2.4X OR16.3X2.4X OR16.3X2.4X OR16.3X2.4X OR20.3X2.4X OR20.3X2.4X OR20.3X2.4X OR25.3X2.4X OR25.3X2.4X OR25.3X2.4X OR25.3X2.4X OR33.3X2.4X OR33.3X2.4X OR33.3X2.4X OR33.3X2.4X 1205 FPM (e. g. Viton): Example OR8.0X1.5VITX E12
10 ASK Weld fitting ASK steel is non-standard. Alternative standard product: Union G (page C8) with weld nipples SKA (pages E8/E9) both ends. S 1 S 2 E Series Tube O.. Steel Stainless steel S 10 ASK610X1S ASK610X1S71 10 ASK610X1.5S ASK610X1.5S71 10 ASK610X2S ASK610X2S71 12 ASK612X1.5S ASK612X1.5S71 12 ASK612X2S ASK612X2S71 12 ASK612X2.5S ASK612X2.5S71 16 ASK616X1.5S ASK616X1.5S71 16 ASK616X2S ASK616X2S71 16 ASK616X2.5S ASK616X2.5S71 16 ASK616X3S ASK616X3S71 20 ASK620X2S ASK620X2S71 20 ASK620X2.5S ASK620X2.5S71 20 ASK620X3S ASK620X3S71 20 ASK620X4S ASK620X4S71 25 ASK625X3S ASK625X3S71 25 ASK625X4S ASK625X4S71 25 ASK625X5S ASK625X5S71 30 ASK630X3S ASK630X3S71 30 ASK630X4S ASK630X4S71 30 ASK630X5S ASK630X5S71 30 ASK630X6S ASK630X6S71 38 ASK638X4S ASK638X4S71 38 ASK638X5S ASK638X5S71 38 ASK638X6S ASK638X6S71 38 ASK638X7S ASK638X7S71 Without nut and weld nipple: Example ASK10X1SX ASK10X171SX E13
11 90 Weld Fittings SKA-RB Tube bend weld nipple C B A Series Tube Seamless PN P max A B C Weight O.. steel tube (bar) (bar) Shore-Hardness gr./1 piece st approx. 90 S OR8.0X1.5X OR10.0X1.5X OR13.0X2.0X OR16.3X2.4X OR20.3X2.4X OR20.3X2.4X OR25.3X2.4X OR25.3X2.4X OR33.3X2.4X OR33.3X2.4X 1045 FPM (e. g. Viton): Example OR8.0X1.5VITX Series Tube O.. Steel Stainless steel S 10 SKA10X2RB SKA10X2RB71 12 SKA12X2.5RB SKA12X2.5RB71 16 SKA16X3RB SKA16X3RB71 20 SKA20X4RB SKA20X4RB71 25 SKA25X4RB SKA25X4RB71 25 SKA25X5RB SKA25X5RB71 30 SKA30X4RB SKA30X4RB71 30 SKA30X5RB SKA30X5RB71 38 SKA38X5RB SKA38X5RB71 38 SKA38X6RB SKA38X6RB71 E14
Parker Ermeto Weld Fittings
Hydraulic & Offshore Supplies Parker Ermeto Weld Fittings YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Visual index Tube to weld Weld fitting
More information4300 Catalog. Metric Tube. Parker Hannifin Corporation Tube Fittings Division Columbus, Ohio
Metric Tube Q 4300 Catalog Metric Tube Q2 4300 Catalog Metric Tube Introduction Parker offers three types of seamless metric tubes for hydraulic, pneumatic and instrumentation applications: dipped for
More informationDiaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
More informationFittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use
Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationASSEMBLY INSTRUCTION. Compression Fittings. Focus in details MA-SR
ASSEMBLY INSTRUCTION Compression Fittings MA-SR-1 1.3.2016 Focus in details Safety instructions General safety regulations Please pay attention to general safety regulations when working with tools and
More information2-position electric actuators with Ball valves VBZ ½...11/4
4 831.2 & VBZ ½...11/4 2-position electric actuators with Ball valves VBZ ½ 11/4 90 angle - Unidirectional rotation VBZ ½ 11/4 Electric rotary actuators for two-port ball valves Operating voltage AC 230
More informationup to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE
up to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE 1. DESCRIPTION 1.1. GENERAL HYDAC fluid level gauges FSA, fluid level sensors FSK
More information-ANSI. maintenance-free. Stop valve with bellows seal,
Stop valve with bellow seal -ANSI ARI-FABA Long Life - Stop valve with bellows seal, maintenance-free ARI-FABA -ANSI Long Life Class 150 with flanges TA-Air (zero emission) TÜV-Test-No. 088-945053 Cast
More informationErmeto Original Rotary fittings
Ermeto Original Rotary fittings Visual index EO rotary fittings DG 0 DG 02-R DG 02-M p. P6 p. P7 p. P8 EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end
More informationErmeto Original Rotary fittings
Ermeto Original Rotary fittings Visual index EO rotary fittings DG 0 DG 02-R DG 02-M p. P6 p. P7 p. P8 EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationProduct Range Shipbuilding
OSNA -10 and OSNA -30 Product Range Shipbuilding KME Germany AG & Co. KG OSNA -10 and OSNA -30 [GB] Member of the KME Group Contents Range of Applications 1 The Material 2 The Elements 3 Pipes 4 Butt Welding
More informationQuick Disconnect Couplings
Quick Disconnect Couplings A WINNING TEAM GOODRIDGE AND YOU P U S H T H E L I M I T S Quick Disconnect Couplings 1 Quick Disconnect Couplings G-Link Quick Disconnect Couplings are manufactured only from
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationPIPE NIPPLES. Welded Pipe Nipples - Black & Galvanized. q Approved q Approved as noted q Not approved. Standard Schedule 40, XH Schedule 80
Welded Nipples - Black & Galvanized Standard Schedule 40, XH Schedule 80 q FIG. 9: Standard Black Schedule 40 q FIG. 8: Extra Heavy Black Schedule 80 q FIG. 4: Standard Galv. Schedule 40 q FIG. 42: Extra
More informationARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges
More informationErmeto Original Tubes
Ermeto Original Tubes R2 General recommendations for tubes 1. Steel types, mechanical properties, conditions Steel types, mechanical properties and conditions of EO steel tubes Steel type Tensile strength
More informationHDPE Pipe. Catalogue
HDPE Pipe Catalogue HDPE PIPE Catalogue Overview Proplastics is a leading supplier of world class plastic pipe systems for water and sewer reticulation to Southern Africa. Proplastics produces a wide range
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationPiping Material Specification - Piping class : CS101
Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE
More information485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
More informationBASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
More informationproduct catalogue Q116 ISO 9001:2008 certified
product catalogue Q116 ISO 9001:2008 certified Haelok the company Haelok fittings are considered the only mechanical alternative to welding. Haelok AG, the inventor of one of the world strongest mechanical
More informationTUBE & PIPE SECTION D
TUBE & PIPE SECTION pirtekusa.com Page General Technical ata for Tube and Pipe... 2 Flow Rate & Temperature Recommendations... 3 Schedule 40, 80, 160 Pipe ata... 3 Tube ata Standard Sizes... 4 TUBE AN
More information3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More informationA GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
More informationMounting and Operating Instructions EB 5868/5869 EN
Electric Control Valves Types 3213/5857, 3213/5824, Types 3214/5824, 3214/3374, 3214/3274 with safety function: Types 3213/5825, 3214/5825, 3214/3374, 3214/3274 Pneumatic Control Valves Types 3213/2780-1,
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationLATEST PRICE LISTS PIPES & TUBES FITTINGS VALVES CONTACT DETAILS: AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD.
LATEST PRICE LISTS 2017 PIPES & TUBES AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD. SANT INDUSTRIAL VALVES FITTINGS VS FORGED FITTINGS C BRAND ISI APPROVED G.I. FITTINGS VALVES
More informationHAMMER UNIONS AND SWIVEL JOINTS. Sara Sae
HAMMER UNIONS AND SWIVEL JOINTS Sara Sae Quality and Innovation Sara manufactures a diverse range of oilfield equipment in its manufacturing facility in India, using the latest design techniques and CNC
More informationErmeto Original Tubes
Ermeto Original Tubes R2 General recommendations for tubes 1. Steel types, mechanical properties, contions Steel types, mechanical properties and contions of EO steel tubes Steel type Tensile strength
More informationHyva Hoses & Adapters Introduction
Introduction Hyva Hoses Hoses offered by HYVA comply with the highest safety standards for truck hydraulics. Working pressures range from 225 to 350 bar. Code system hydraulic hoses Hose 1 H.P. 16-2000
More informationHygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
More information2SVA / ES-4VA Cutting Ring Couplings
/ Cutting Ring Couplings The entire VOSS programme in accordance with DIN EN ISO 8434-1 in stainless steel 1.4571 4 Experience plus ideas Oil Solutions PO Box 653 Castlemaine 3450 Phone 0421 336 009 Fax
More informationProduct Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More informationThermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar
Pressure Transmitter Type FM40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The measuring device for the transmitter
More informationZBD 1001 Differential Cylinder Data sheet 04.16/DS13210
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 Description: This series represents the logical and consistent supplementation of already ISO 6022 (250 bar) and ISO 6020/1 (160 bar) standard series.
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Hafenstrasse 2 DE Wertheim. Progressive distributor VPB
Progressive distributor VPB Use: In progressive mode based central lubrication systems. The main features of WOERNER progressive distributors are as follows: Accurate proportioning volumes. different proportioning
More informationBALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
More information600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
More informationMARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationSpring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
More informationOilfield Service and Distribution Products
Oilfield Hammer Unions Hammer Seal Swivel Joints Industrial Unions Non-Freeze Tank Valves Seal-O-Grip Oilfield Service and Distribution Products Issue Date 10/01/2009 www.kempervalve.com Sales: 800-231-2724
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationInline Filter RFLD. Change-Over. Cast Version Flow Rates up to 1300 l/min* Pressure Range 25/40/64 bar With Ball Change-Over Valve E /01.
Change-Over Inline Filter RFLD Cast Version Flow Rates up to 3 l/min* Pressure Range 25/4/64 bar With Ball Change-Over Valve * For higher flow rates, please refer to brochure RFLD Welded Version E 7.9.2/.4
More informationVPN1-06. Functional Description HA /2008. Pilot Operated Pressure Relief Valves. Replaces HA /2002
Pilot Operated Pressure Relief Valves VPN-06 HA 56 4/2008 Size 06 p max up to 320 bar Q max up to 70 L/min Replaces HA 56 3/2002 Cartridge, modular and in-line design Five pressure ranges Two pressure
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More informationSelf-operated Pressure Regulators Type Universal Pressure Reducing Valve
Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN
More informationDIGIFLO ELECTRONIC FLOWMETER
DIGIFLO ELECTRONIC FLOWMETER PIPE FITTING INSTALLATION MANUAL SADDLE MACHINED IN-LINE BODY MOLDED IN-LINE BODY MOLDED TEE Blue-White R Industries, Ltd. F-2000 Page 2 1.0 Temperature vs. Pressure Temperature
More informationGS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
More informationDiaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable
More informationFLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).
More informationDSH* /117 ED LEVER OPERATED DIRECTIONAL CONTROL VALVE MOUNTING SURFACES DSH3 ISO DSH5 ISO
41 600/117 ED DSH* LEVER OPERATED DIRECTIONAL CONTROL VALVE MOUNTING SURFACES DSH3 ISO 4401-03 DSH5 ISO 4401-05 p max (see performances table) Q nom (see performances table) OPERATING PRINCIPLE The DSH
More informationCopper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
More informationChapter 1 Pipes and fittings PVC - PE
Chapter 1 Pipes and fittings PVC - PE Solvent weld fittings Threaded connections Ball valves & butterfly valves Page 1-20 Page 21-33 Page 34-37 Slide valves & check valves Solvents & sealants Tools Page
More informationInstallation and commissioning of Settima screw pumps. Type GR** SMT** 3-screw screw pumps. a. Medium:
Settima screw a. Medium: HL oil conforming to DIN 51524 Parts 2 and 3 Special media such as: HFA min 5% oil HFB min 40% oil HFC max. 35-55% water HFDR high-viscosity lubricants SKYDROL, MIL-H may also
More informationPressure Transmitter JUMO dtrans p30 Type
Data Sheet 40466 Page 1/6 Pressure Transmitter JUMO dtrans p0 Type 40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The
More informationThreaded fittings. Festo core product range Covers 80% of your automation tasks
Threaded fittings q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationDual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
More informationRV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with
More informationHANWEL NEDERLAND. flexible leidingen. Swivel joints
HANWEL NEDERLAND flexible leidingen Swivel joints HANWEL is your qualified partner in the field of flexible piping systems. The product range of HANWEL B.V. includes Swivel Joints Rotary Joints Complete
More informationØ5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
More informationSeries 430 Type 3430 Pneumatic Indicating Controller for Temperature with Capillary Sensor Type 3432 Controller Station Type 3436 Transmitter Module
Series 430 Type 3430 Pneumatic Indicating Controller for Temperature with Capillary Sensor Type 3432 Controller Station Type 3436 Transmitter Module Application Temperature controller for process engineering
More informationPIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
More information82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
More informationEXPANSION JOINT SELECTION GUIDE
EXPANSION JOINT SELECTION GUIDE The proper selection and application of an expansion joint is the determining factor in its operation and life. Improper selection and application will lead to problems
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim. Progressive distributor VPA-B
Progressive distributor VPA-B Use: In progressive mode based central lubrication systems. The main features of WOERNER- progressive distributors are as follows: Accurate proportioning volumes. Clear and
More informationMetering Units and Piston Distributors with Quick Connector System
1-5015-US Metering Units and Piston Distributors with Quick Connector System for single-line total-loss lubrication systems (oil or fluid grease) Group 320: 0.01-0.16 ccm for oil 0.03-0.10 ccm for fluid
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
More informationi butt weld spigot i flanged end acc. to DIN PN 10 / 16
body material PVC-U PVC-C PP PVDF ball seat PTFE other seats iepdm ifpm i *) working temperature 0 C to 50 C 0 C to 90 C -20 C to 80 C nominal size DN to DN connection with pipe legth acc. to EN 558-1
More informationHydraulic Flanges & Components & Dual Seal Flanges
Hydraulic Flanges & Components & Dual Seal Flanges L Hydraulic Flanges and Components Flange Clamps FCS Flange Clamps Split FCC Flange Clamp Captive FHS3 Code 61 Flange Clamps Metric FHS6 Code 62 Flange
More informationValves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
More informationCutting Ring Couplings
Cutting Ring Couplings The soft seal connection with 4-fold benefits 3 Experience plus ideas Oil Solutions PO Box 653 Castlemaine 3450 Phone 0421 336 009 Fax 03 9012 3332 sales@oilsolutions.com.au www.oilsolutions.com.au
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
More informationJULY Polyethylene Piping Systems.
JULY 205 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationFLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is
More informationLONG STEM BALL VALVE of carbon steel with welded ends series
with welded ends 38000 series C ont R o L Description Edition 05-07-2016 Ball valve series 38000 tested according to the EN488 standard and fulfill the requirements of this standard. Tight on-off valve
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationCATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationErmeto Original Tubes
Ermeto Original Tubes R2 General recommendations for tubes 1. Steel types, mechanical properties, contions Steel types, mechanical properties and contions of EO steel tubes Steel type Tensile strength
More information710, 717, 723. Ball Valve, Plastic
Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance
More informationpage 402 page 403 page 405
page 402 page 403 page 405 Quick closing valves Ductile cast iron Pressure rating: PN 10 DN 15-200 Pressure above the disc Actuators easy to exchange Type approval by classification societies Bellow sealed
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More informationVED05MJ - PROPORTIONAL DIRECTIONAL CONTROL VALVES WITH OBE & POSITION FEEDBACK
CONTINENTAL HYDRAULICS VED05MJ PROPORTIONAL DIRECTIONAL CONTROL VALVES WITH OBE & POSITION FEEDBACK VED05MJ - PROPORTIONAL DIRECTIONAL CONTROL VALVES WITH OBE & POSITION FEEDBACK 5505 WEST 123RD STREET
More information- Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN.
CARBON STEEL PIPES STAINLESS STEEL PIPES - Seamless pipe, Welded pipe (ERW), Spiral welded pipe. - Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN. - Standard: ASME/JIS - Material: ASTM A53/A106
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationGEMÜ R680 Motorized diaphragm valve
Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications
More informationSPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół. Sokółka 20...
SPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół Sokółka 20... LIST OF CATALOGUE ITEMS No. Table title Page number 1. Complete lower frame 3 2. Wrapping film feeder 9 3. Movable frame 13 4.
More informationVA 40. Variable-area flowmeter. For explosion protected devices please refer to Supplementary Installation an Operating Instructions:
KROHNE 01/2005 7.02266.22.00 GR Installation and Operating Instructions VA 40 Variable-area flowmeter For explosion protected devices please refer to Supplementary Installation an Operating Instructions:
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationNAVAL. Navaltrim stainless steel control valve
NAVAL Navaltrim stainless steel control valve CONSTRUCTION: NAVALTRIM CONTROL VALVE NAVALTRIM control valves are designed for control of liquid flows in heating, and cooling systems. They are also suitable
More information