EUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim. Progressive distributor VPA-B
|
|
- Ethelbert Skinner
- 5 years ago
- Views:
Transcription
1 Progressive distributor VPA-B Use: In progressive mode based central lubrication systems. The main features of WOERNER- progressive distributors are as follows: Accurate proportioning volumes. Clear and precise arrangement of control channels in spite of small-size construction. Modular system construction. Quick fault remedy possible without having to loosen the pipeline. different proportioning volumes selectable in accordance with the lubricant required. - Subject to modifications - Extremely long service life due to refined sliding surfaces. Pluggable monitoring elements can be replaced during operation. No proportioning decrease at the piston monitored. Technical data: Proportioning volume per cycle: 0, , cm³ Lubrication point connections at max.: 0 Operating pressure at max.: 0 bar Throughput volume in case of: Oil at max.: 700 cm³/min Grease at max.: 70 cm³/min Delivery medium: Oil-viscosity: > cp Grease up to: NLGI-category Material: Proportioning block: Internal parts: Connecting plate: Aluminium Steel Aluminium Temperature range: C A = Mounting point at distributor (for viewing indicator and electrical functionality check) B = Mounting point for viewing indicator at distributor (if point A is occupied) D = Proportioning block DPA-B H = Main line K = Proportioning volume distinctive number R = Connecting plateapa-b S = mid fastening screw Number of outlets Length "a" Length "s" Weight [kg] 97-0,0-0, - 0,80 8 0,9 70 8,0 87 8, 0 0,0 0, Mounting position: usually as needed Note: In case of heavy vibration or shock load, install the distributor such that piston axes are situated vertically to the main direction of shock impact. An optimum ventilation of the whole lubrication system is the precondition for its functionally safe operation. For quicker ventilation, the flow direction from bottom to top in the distributor is of advantage (inlet on bottom side). The distributor must not be "distorted". Therefore when mounting it, always be careful that the supporting surface is level. Progressive distributor VPA-B 0.00 Replaces No. Page of EN EN
2 - Subject to modifications - Visual check Functional checks: Visual check: In a translucent polyamide casing, a red pin being fixed to the piston shows the piston's movement. Casing material: Polyamide, translucent Ambient temperature: C Weight: 0, kg Mounting point at distributor: Aor B Casing for initiator Electrical check with initiator: Casing for initiator: A pin being connected with the piston attenuates an initiator once per cycle. Version "D": Casing material: Polyamide, translucent (Piston movement is visible) for initiators with a switching distance of: 8 mm Version "W": Casing material: Polyamide, black for initiators with a switching distance of: mm Choice of initiators: Designation / Initiator "C" Purchase-no Suits for Casing "W" Switching dis. mm Initiator "F" Casing "D" and "W" Switching dis.8mm Initiator "N" Casing "D" and "W" Switching dis.8mm Use initiator with M8x thread! (When using other initiators than those depicted below, such initiators must be checked for suitability.) Initiator "I" Casing "W" Switching dis.mm Initiator "" Casing "W" Switching dis.mm Dimension drawing: Operating voltage: VDC VUC VDC VDC VDC Residual ripple: 0% % % % Load current at max.: 0 ma 00 ma 0 ma 00 ma 0 ma Protection system: IP7 IP7 IP7 IP7 IP7 Power connection: Cable m Cable m Unit plug (see accessoires page ) Length "A": 0 mm mm mm 8 mm mm Page of 087 EN
3 Electrical check with reed contact: Version "R" A magnet connected with the piston switches the reed contact once per cycle. Switching voltage: 0... VUC Switching current at max.: ma Switching power at max.: 0,9 VA Ambient temperature: C Mounting pointat distributor: A Version "R" with plug-in connection DIN 0A: Material (casing): Al or.0 IP Version "RK" - Subject to modifications - Version "RS" Version "RK" with cable: Material (casing): PA or.0 IP Cable Length: 0 m Cross section: x0,7 mm² Material: Oilflex Accessories: Cable jack for functionality check "RS" and initiator (state purchase-no., please) Cable jack with LED and cable LED yellow = function display green = operating voltage Cable jack with terminal clamps Version "RS" with unit plug pin (M): (for matching cable jack see accessories) Material (casing): PA or.0 Cable jack with LED and cable: Purchase-no.: Operating voltage: Cable Cross section: Length: VDC x0, mm² m IP8 Cable jack with terminal clamps: (without LED) Purchase-no.: 9.0- type: Screws cross section: at max. 0,7 mm² Cable diameter:... mm IP7 Page of 087 EN
4 - Subject to modifications - Purchase-designation: Progressive distributor VPA-B Number of outlets Functionality check Visual check electrical check Initiator Proportioning volume per piston stroke and outlet [cm³] distinctive no. Gasket material without... 0 without Reed contact without 0,09 09 NBR (Perbunan) increasing by outlets each with translucent initiator casing switching distance 8mm D N F 0, FPM (Viton) reinforced initiator casing switching distance mm W N I C F 0,0 0 Purchase-designation: Proportioning block DPA-B Purchase-designation: Connecting plate APA-B Note: When a functionality checking device is to be added on, the proportioning volume must be 0,0 cm³ at least at the last point! Distributor view Scheme Purchase-example: (for the distributor as depicted here) Progressive distributor with outlets, without visual check "0", with receptacle for initiator "W" and initiator "C", proportioning distinctive numbers "0", "0", "09", "", "", "0", gasket material "P". Purchase-designation: VPA-B / / 0 / W / C / 0 / 0 / 09 / / / 0 / P R : P P A V 0 0 M : K K Z K Z Z L : B B 0 0 B A Page of 087 EN
5 Combination of outlets, doubling the proportioning volume at an outlet: Connect opposing outlets by removing the "Z" screw. Close the not needed outlet with the lock screw. Without removal of the "Z" screw, no outlet must be locked. Z Add-on elements and combination of outlets: - Subject to modifications - Distinctive letters: B = double bridge P = triple bridge A = Outlet at the bridge Z = opposing outlets separated K = opposing outlets connected 0 = open outlet V = Lock screw outlets are combined into one outlet by means of a triple bridge, a double bridge, and removal of the "Z" screws. Open outlets adjacent outlets are combined into one outlet by means of a double bridge. opposing outlets are combined by removing the "Z" screws. Accessories: Pipe screw fittings DIN : thread (please state purchase-no.) Pipe screw fitting with pipe-outer Check valve with pipe-outer G/ Bridges and lock screw: (please state purchase-no.) double without outlet (B-B) triple without outlet (P-P-P) Bridges double with outlet (B-A) triple with outlet (P-P-A) double without outlet (B-B) Bridges (location of the mid fastening screw "S") triple without outlet (P-P-P) double with outlet (B-A) triple with outlet (P-P-A) Lock screw "V" Position of the mid fastening screw "S" Page of 087 EN
6 - Subject to modifications - Main line Fig. Functional process figures... : Monitoring of progressive distributors: Bypass line right-side I II Bypass line left-side The lubricant flows from the main line through the right-side ring groove of piston III as well as the bypass line (right) and to the left side of piston I and moves it into its home position. The lubricant displaced by piston I is ejected via the left bypass line through outlet no.. As for instance due to soiling, the flow through a lubricant point line may be prevented. This will cause a piston to get blocked. By virtue of the forced control as depicted in figures up to, the other pistons will be stopped as well. Due to this configuration, the proportioning at all outlets of the distributor can be monitored by means of a sensor at one piston only. III Fig. Mounting note: I After shifting of piston I, lubricant flows to the left side of piston II and pushes it into its right-side home position. The displaced lubricant is ejected via outlet no.. The pistons are provided with an extremely small fitting clearance. Therefore, the pistons, after the dismantling of a distributor, must never be interchanged. Fig. After shifting of piston II, lubricant flows to the left side of piston III and pushes it into its right-side home position. The displaced lubricant is ejected via outlet no.. Formula for calculating the lubricant available per lubrication point: A progressive distributor allocates the delivered lubricant to the individual lubrication points in forced order. Due to the functional process as described herein, a safe proportioning is ensured. II The lubricant q i delivered to a lubrication point i can be calculated as follows q i = K i (K +K +K...) Q Fig. After shifting of piston III, lubricant flows to the right side of piston I and pushes it into its left-side home position. The displaced lubricant is ejected via outlet no.. The continuation of that process is evidenced in the scheme depicted. Q = lubricant delivered to the distributor, K i = distinctive number of the outlet i III Page of 087 EN
EUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim. Progressive distributor VPA-C
Progressive distributor VPAC Use: In progressive mode based central lubrication systems. The main features of WOERNER progressive distributors are as follows: Accurate proportioning volumes. Clear and
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Hafenstrasse 2 DE Wertheim. Progressive distributor VPA-D
Progressive distributor VPA-D Use: In progressive mode based central lubrication systems. The main features of WOERNER progressive distributors are as follows: Accurate proportioning volumes. Clear and
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 D Wertheim Am Eichamt 8 D Wertheim
Progressive distributor in element construction VPI-D Use: In progressive mode based central lubrication systems. The main features of WOERNER progressive distributors are as follows: 4 different proportioning
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Hafenstrasse 2 DE Wertheim. Progressive distributor VPB
Progressive distributor VPB Use: In progressive mode based central lubrication systems. The main features of WOERNER progressive distributors are as follows: Accurate proportioning volumes. different proportioning
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim. Pump aggregate. Drive: Use:
Pump aggregate GMG-B Use: As pump aggregate in central lubrication systems for the delivery of oil, liquid grease or grease 1 or 2 pump outlets up to 2 outlets with progressive distributor flanged-on -
More informationTable of contents. Table of contents. Overview of progressive distributor Distributor bridge without outlet...
Table of contents 4 Technical basics System description... 04-0-10-01 Construction, applications, advantages, function System design... 04-0-10-02 Design and installation of progressive systems Calculation
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Hafenstrasse 2 DE Wertheim. Volume flow meter with throttle- and bypass valve KUZ-L
with throttle- and bypass valve Use: In oil lubrication systems H Viscosity-independent volume flow monitoring High measuring accuracy ig monitoring range Continuously adjustable volume flow Gearwheels
More informationProgressive Central Lubrication Systems
Table of contents 4 Technical basics System description... 04-0-0-0 Construction, applications, advantages, function System design... 04-0-0-02 Design and installation of progressive systems Calculation
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim
Reciprocating pump PMF / GMF This is a multi-line reciprocating pump for many applications - Subject to modifications - Being a universal type, our reciprocating pump is capable of meeting any challenge.
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim. Pump unit GMZ-E
Pump unit GMZ-E Pump used to supply oil and grease from a barrel directly through a lid-hole or a bunghole. Technical data: Pump with bung-hole Pump with barrel lid Delivery volume per stroke: Pump element
More informationProgressive distributor SXE-2
The progressive piston distributors SXE-2 are distribution units with hydraulic sequence control, whose pistons are controlled by the lubricant supply so that the lubricant is forced in sequence through
More informationBlock metering device VPB. Block feeder for use in oil or grease lubrication systems
Block metering device VPB Block feeder for use in oil or grease lubrication systems Block metering device VPB Block metering devices or feeders of the VPBM/VPBG series are used in small circulating-oil
More informationGREASE NLGI (*) OIL CST (*) PRESSURE (220.5) (147) - 20 (294) (220.5)
CHARACTERISTICS THREE TYPES OF THREADING AVAILABLE: BSP, NPTF, SAE : UP TO 500 BAR : UP TO 400 BAR OIL AND GREASE FUNCTION CE AND ATEX MARKINGS BASES ALWAYS SUPPLIED WITH STANDARD SEALS AND MOUNTING SCREWS
More informationPROGRESSIVE BLOCK DISTRIBUTOR BVA-N
PROGRESSIVE BLOCK DISTRIBUTOR BVA-N APPLICATION The BVA-N progressive block distributors are lubricating elements of central grease and oil lubricating systems. BVA-N series is made of stainless steel
More informationAPPLICATION OF SYSTEM 8
System 8 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all valve components is approimately
More informationPROGRESSIVE DISTRIBUTOR PRA,PRB
PROGRESSIVE DISTRIBUTOR PRA,PRB APPLICATION PRA and PRB series Progressive distributors represent a lubricating element of central grease lubricating systems which are consequently known as circuits with
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationA system of lubricant dispensing devices (oil or grease) connected by piping to a central pumping unit that is operated automatically or manually.
Air/Oil Systems: A lubrication system in which small measured quantities of oil are introduced into an air/oil mixing device which is connected to a lube line that terminates at a bearing, or other lubrication
More informationAUTHORIZED DISTRIBUTOR DPX PROGRESSIVE DIVIDERS
1 DESCRIPTION Ilcolube is the lubrication system which identifies distribution and dosing with a progressive movement of pistons that are. Controlled one by the other in an interdependent sequence. This
More informationProgressive distributor MX-F
The progressive piston distributors are distributor devices with a hydraulic sequence control, the pistons of which are regulated by the supplied lubricant in a way that the lubricant inevitably and successively
More informationProgressive distributor SX-1
Progressive distributors SX-1 are distributor devices with hydraulic sequence control whose plungers of lubricant supplied are controlled such that the lubricant escapes forcibly and in sequence from the
More informationZBD 1001 Differential Cylinder Data sheet 04.16/DS13210
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 Description: This series represents the logical and consistent supplementation of already ISO 6022 (250 bar) and ISO 6020/1 (160 bar) standard series.
More informationType Modular Water Valve System servo-assisted; variable and extendable. 2/2 way; DN mm; 1 up to 7 bar Advantages / Benefits
2/2 way; DN 10-13 mm; 1 up to 7 bar Advantages / Benefits Reduction of Cost of Ownership up to 60% Modular system design Block assembly by lock technology Easy change between distributing and collecting
More informationType KKP. Combination pumps
Features Compact and light Integrated low-pressure unloading valve and fail safe valve (not suitable for continuons rating) Can be started in maximum pressure mode Self-priming Direct installation of motor
More informationElectric barrel pump EFP-1 and EFPM-2 General, Fields of application und types of systems
Electric barrel pump EFP- and EFPM- General, Fields of application und types of systems General: The - electric barrel pump EFP- is a precisionpiston pump designed for greases up to the consistency class
More informationElectric pump EP-1. Electric pump with 1.9 kg reservoir:
The BEKA-MA central lubrication pump model EP-1 is electrically actuated and has up to a maximum of independently operating lubricant outlets. A separate pump element is required for each outlet. Three
More informationBlock feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
More informationBlock feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
More informationBR 30a. Pneumatic Multi-turn Actuator. Application: Special designs:
Pneumatic Multi-turn Actuator BR 30a Application: Single-acting pneumatic diaphragm multi-turn actuator for butterfl y valves and other rotary valves: The pneumatic BR 30a Multi-turn Actuators are diaphragm
More informationModular pneumatic valve unit
Modular pneumatic valve unit Compact design Modular configuration High flexibility Type 8640 can be combined with Simple exchange of valves (with option P-shut-off - also possible during operation) Type
More informationPSG product series. Modular feeder. For oil and grease For use in SKF ProFlex progressive and SKF CircOil circulating centralized lubrication systems
odular feeder PSG product series For oil and grease For use in SKF ProFlex progressive and SKF CircOil circulating centralized lubrication systems PSG1 PSG2 PSG3 Fields of application etal-forming machinery
More informationExternal Gear Pumps Series F
External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single
More informationInstallation and commissioning of Settima screw pumps. Type GR** SMT** 3-screw screw pumps. a. Medium:
Settima screw a. Medium: HL oil conforming to DIN 51524 Parts 2 and 3 Special media such as: HFA min 5% oil HFB min 40% oil HFC max. 35-55% water HFDR high-viscosity lubricants SKYDROL, MIL-H may also
More informationFlow limiter SP/SMB 8... DSK US (09.04)
DSK 0-050-08-US (09.04) for mounting plates General information s are used in large oil circulation lubrication systems. The task of a flow limiter is to divide up the volumetric flow of the main line
More informationPilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
More informationMX-SERIES OVAL GEAR FLOW METERS
Data Sheet MX-SERIES OVAL GEAR FLOW METERS Supplied by.com Call us on +44 (0)118 916 9420 Email info@247able.com MX-Series Oval Gear Flow Meters Features and Advantages P From ¼ DN8 at 0.5LPH to 4 DN100
More informationModular pneumatic valve island
Modular pneumatic valve island Compact design Modular configuration High flexibility Simple exchange of valves (with P shut off, also possible during operation an option) Type 8640 can be combined with
More informationPMFO AIR/OIL SYSTEM PMFO AIR-OIL PROGRESSIVE MODULAR LUBRICATING SYSTEMS
AIR/OIL SYSTEM AIR-OIL PROGRESSIVE MODULAR LUBRICATING SYSTEMS (BLUE COLOUR ALUMINIUM BASE) The basic design of this system is similar to the PMF progressive, but with the inclusion of airways to enable
More informationRemote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
More informationINSTRUCTION MANUAL. I/P Converter DSG BXXY3Z DSG BXXY4Z
INSTRUCTION MANUAL I/P Converter DSG BXXY3Z DSG BXXY4Z Revision 2.0 3.626 016136 en Page 1/15 Should you have any questions concerning the I/P converter, please contact the Service Department of the Product
More informationFlow limiter SP/SMB3 Flow limiter SP/SMB6
-00-EN Flow limiter SP/SMB Flow limiter SP/SMB6 for circulating-oil lubrication systems Advantages reliable perpetual dispensation of individual volume flows - self-adjusting metering, thus identical volume
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim. Piston pump PMW. Air-actuated multiplunger pump
PMW Air-actuated multiplunger pump Capable of delivering both oil and grease up to consistency class Use: - - As feed pump pneumatic drive As cycle-lubrication system in conjunction spraying nozzles Models:
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationPump elements. Pump elements. Pump elements PE 60 / PE 120 / PE 170 (with pressure limiting valve)
Table of contents Installation of the pump elements... 06-3-0-0 Functional description of the pump elements... 06-3-0-02 Overview pump elements... 06-3-0-03 with spring return PE 5 / PE 0 / PE 5 / PE 25
More informationup to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE
up to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE 1. DESCRIPTION 1.1. GENERAL HYDAC fluid level gauges FSA, fluid level sensors FSK
More informationSOLENOID VALVES FOR REFRIGERATING SYSTEMS
SOLENOID VALVES 17 SOLENOID VALVES FOR REFRIGERATING SYSTEMS APPLICATIONS The solenoid valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive
More informationL1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel
Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.
More informationAssembly and operating Instructions Bypass Flow Meter DST
Assembly and operating Instructions Bypass Flow Meter 2 Contents 1. Foreword... 3 2. Safety... 3 2.1. Symbol and meaning... 3 2.2. General safety directions and exemption from liability... 3 2.3. Intended
More informationCirculation pumps BFP-ATEX-T3/T4
Circulation pumps BFP-ATEX-T3/T F ATEX - range of use: to zone 1 and zone 1 T3 to zone 1 and zone 1 T Low noise emission High vol. efficiency Optimum suction Gerotor principle Resistant to contamination
More informationFITTINGS AND ACCESSORIES
INDEX Application examples and general notes... Page 2 General description... Page 3 Modular SMX SMX... Page 7 Monitor of piston movement: by a reed Switch and micro switch... Page 15 by inductive proximity
More informationChapter B-3. Chapter 3. Actuators and output devices. Festo Didactic TP101
155 Chapter 3 Actuators and output devices Festo Didactic TP101 156 An actuator is an output device for the conversion of supply energy into useful work. The output signal is controlled by the control
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationRev. E Sept 06. VP300 INSTRUCTION MANUAL Part # DISPENSING VALVE MODEL VP300 INSTRUCTION MANUAL
DISPENSING VALVE MODEL VP300 INSTRUCTION MANUAL CONTENTS 1 Introduction page 3 2 Specifications page 3 3 Part Description page 4 4 Operating Principles page 5 5 Operating Procedure 5-1 Setup page 6 5-2
More informationOscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids
Oscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids Suitable for all kind of liquids Viscosity up to 120000 mpa s Excellent performance with changing process conditions
More informationChapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
More informationProduct description Electric Lubrication pump Dynamis Maxx APPLICATION PRODUCT CHARACTERISTICS ADVANTAGES
Product description Electric Lubrication pump Dynamis Maxx APPLICATION The DYNAMIS MAXX pump was designed and developed to serve as a multi-function automatic lubricant pump. Due to its compact size and
More informationPositive Displacement Flowmeters GM020 series instruction manual
ACCURATE FLOWMETERS & INSTRUMENTATION PVT. LTD. Positive Displacement Flowmeters GM020 series instruction manual GM020 Pulse Meter From serial No. CXXXX Accurate Flowmeters & Instrumentation Pvt. Ltd.
More informationSpecial valves. Series. Solenoids. IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64. Aluminium. Operation. Page no. EEx me IP65.
Special valves Operation Series Page no. Function 2/2 Body material Brass Aluminium Solenoids IP Protection class Explosion proof class IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64 EEx
More informationHydraulic pump HP-1. Type 1. Type 2
The BEKA-MAX central lubrication pump model HP-1 is hydraulic actuated and has up to a maximum of independently operating lubricant outlets. A separate pump unit is required for each outlet. Three pump
More informationMAGNETO-INDUCTIVE POSITION DETECTORS
MAGNETO-INDUCTIVE POSITION DETECTORS Series 88 Type 2 wires APPLICATION This four-wire proximity sensor will monitor stroke end and intermediate positions of pneumatic cylinders equipped with built-in
More informationExamples 3/2-way valve A T NO: Symbol
1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.
More informationFlow limiter SP/SMB US
Flow limiter SP/SMB 13... 1-3004-US for installation in the lines of circulating-oil lubrication systems General information Flow limiters are used in large circulating-oil lubrication systems. The task
More informationManually or pneumatically actuated piston pumps
Manually or pneumatically actuated piston pumps Product series Pxx For oil and fluid grease For use in SKF MonoFlex single-line centralized lubrication systems Manually or pneumatically actuated piston
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More informationp max (see table of performances) Q max (see table of performances) bar Maximum flow rate from port P to A - B - T l/min
41 400/117 ED E*P4 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC (C*P4) CONTROLLED E4P4 CETOP P05 E4R4 ISO 4401-05 E5 ISO 4401-08 p max (see table of performances) Q max (see table of performances)
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More informationModular multiple foot switches PC series
3B Modular multiple foot switches PC series Combination diagrams EMERGENCY PUSH BUTTON COMMERCIAL BOX ALUMINIUM PIPES CARRYING ROD ALUMINIUM PIPES HANDLE KIT STABILIZING PLATE DOUBLE CARRYING ROD COMMERCIAL
More informationRemote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
More informationSystem description for cylinder lubrication and valve seat lubrication on large 4-stroke diesel engines
for cylinder lubrication and valve seat lubrication on large 4-stroke diesel engines Valve seat lubrication Cylinder lubrication Version 04 Page 2 for cylinder lubrication and valve seat lubrication on
More informationDPL MONOBLOCK PROGRESSIVE DIVIDERS
HIGH QUALITY HIGH TOLLERANCE 1. E L E A COMBINATION OF PERFORMANCE AND CONVENIENCE I.L.C. srl - Via Garibaldi, 149-21055 Gorla Minore Italy Ph. +39 0331 601697 Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationGrease-lubricating pump FF... DSK US (05.05)
Grease-lubricating pump FF... DSK 2-008-00-US (05.05) electrically operated, for small and medium-sized multiple-line and progressive systems PSG-2 with cycle switch VPB with cycle switch PSG-2 with cycle
More informationSystem 6. ü ( System 6
System 6 ü www.nassmagnet.com ( +9 511 676-0 System 6 The name System 6 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More informationPRM7-06. Functional Description HA /2006. Proportional Directional Control Valves. Replaces HA /2002
Proportional Directional Control Valves PRM7-6 HA 59 /6 Size D (6)...6 PSI ( bar)...6 GPM ( L/min) Replaces HA 57 / Digital control Compact design Operated by proportional solenoids High sensitivity and
More informationISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings
ISO 632 Cylinders ISO 15552 Cylinders Compact Cylinders TC08 Series Pilot Valves 207-208 209-212 213-21 215 TC15 Series Pilot Valves TC08 Series Solenoid Valves CD7 Series Solenoid Valves CD12 Series Solenoid
More informationPRM7-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013
Proportional Directional Control Valves PRM7-6 / Size 6 (D ) bar (76 PSI) L/min (.6 GPM) Replaces HA 7 / Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis
More informationModular electrical and pneumatic automation system
Modular electrical and pneumatic automation system Decentralised automatisation without control cabinet in protection type IP65 / IP67 Modular structure, also as central station with several decentralised
More informationFlow limiter SP/SMB9 for mounting plates
1-3002-EN Flow limiter SP/SMB for mounting plates Advantages reliable perpetual dispensation of individual volume flows - self-adjusting metering, thus identical volume flows despite different back pressures.
More informationInstruction Manual EDS-75-S EDS-100-S/F EDS-160-S/F EDS-200-S/F EDS-220-Z EDS-250-S/F
Instruction Manual -75-S -100-S/F -160-S/F -200-S/F -220-Z -250-S/F -260-Z -300-S/F/Z -370-Z -400-S/F/Z -500-S -630-S/F Long-Stroke sensors, Series Contents 1. Safety... 5 1.1 Symbols Used... 5 1.2 Warnings...
More information4/3 directional control valve, pilot operated, with electric position feedback and integrated electronics (OBE)
4/ directional control valve, pilot operated, with electric position feedback and integrated electronics (OBE) RE 977/.1 Replaces: 1.9 1/16 Type 4WRVE 1...7, symbols V, V1 Sizes 1, 16, 5, 7 Component series
More informationPOSITIVE DISPLACEMENT FLOWMETERS
MS589 0409 00 POSITIVE DISPLACEMENT FLOWMETERS M80 SERIES INSTRUCTION MANUAL M80 Pulse; Standard LCD; Deluxe LCD; From serial No.CXXXX TO THE OWNER Please take a few minutes to read through this manual
More informationReed, Electronic. MOVEMENT > Series CST-CSV-CSH proximity switches GENERAL DATA
> Series CST-CSV-CSH proximity switches Series CST - CSV and CSH magnetic proximity switches Reed, Electronic» Designed to fit into the grooves provided in the profile barrel of the cylinder» The three
More informationControl block VOFA with safety function
Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,
More information4 Self aligning ball bearings
Rolling bearings 4 Self aligning ball bearings Designs and variants... 538 Basic design bearings... 539 Bearings with an extended inner ring.. 540 Cages... 540 Sealing solutions... 540 Greases for sealed
More informationFlow limiter SP/SMB13 for line installation in circulating-oil lubrication systems.
1-3004-EN Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems. Flow limiters are used in circulating-oil lubrication systems. The task of a flow limiter is to divide up the
More informationPositive Displacement Flowmeters GM007 series instruction manual
MS499G 0603 0003 Positive Displacement Flowmeters GM007 series instruction manual GM007 Pulse Meter From serial No. CXXXX To the owner Thank you for purchasing a GPI GM GPI by telephone or fax.] Series
More informationJUMO MIDAS Pressure transmitter
Phone: +44 19 635533 Fax: +44 19 6356 Data Sheet 401001 Page 1/5 JUMO MIDAS Pressure transmitter Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids
More informationISO/VDMA Series ISO 6431 and VDMA Cylinder Line
ISO/VDMA Series ISO 6431 and VDMA 24562 Cylinder Line www.asco.com Table of Contents ISO/VDMA Series Features and Benefits 2 How to Order 3 Technical Information 4 Dimensions Tie-Rod Version 5 Mounting
More informationFlap-Type Flow Meter Prall
Suitable for H 2 O, acids, alkaline solutions and gases Spring-loaded flap Horizontal or vertical direction of flow Largely independent of viscosity Limit contacts, optional Analog output 4 20 ma, optional
More informationPlastic tube variable area flowmeter for liquids and gases
Plastic tube variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding connections)
More informationElectromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids
Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids For use in large diameter pipes as an economical solution for flow measurement Flow rate measurement
More informationORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
More informationInstallation and Operating Instructions. Variable area flow meter RA 65 / FA 65
Installation and Operating Instructions Variable area flow meter 2 Contents 1. Foreword...3 2. Safety...3 2.1. Symbol and meaning...3 2.2. General safety directions and exemption from liability...3 2.3.
More informationTransformer Protection Relay MCHD
Protects Hermetically Sealed, Oil Filled Distribution Transformers and Reactors in Accordance with EN 50216-3 Reed switch for gas formation and oil level detection Adjustable pressure switch Bimetal thermometer
More informationUD and UC Gear pump unit
1-19-EN for SKF CircOil or hydraulic lubrication systems General Information The UC and UD gear pump units are vertically or horizontally arranged units that are used in hydraulic or circulating-oil lubrication
More informationMulti Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
More informationMetso High Consistency Sampler Metso Nove H. Installation & Owner s Manual K10196 V1.1 EN
Metso Nove H Installation & Owner s Manual K10196 V1.1 EN Table of contents Warnings & safety information 3. Actions during operation 19 Recycling and disposal 1. Introduction 7 1.1. General description...7
More informationInstallation and operating manual
LK product no: 901002 and 901102 501002 and 501102 (JIS) Article no: 74500 Revision: 9 Article no: 74500 Revision: 9 2 (23) Contents 1. General information... 5 2. Safety precautions... 5 2.1 Significance
More information