TECHNICAL DATASHEET SITA ACCIAIO CE 1 steel wedge anchor for cracked and non-cracked concrete
|
|
|
- Primrose Casey
- 5 years ago
- Views:
Transcription
1 C.so Savona 22,29 Villastellone (TO), Italia rev. 01/1 p. 1/ Certiicates ETA-/0076 Approval accoring to ETAG 001- or non-cracke an cracke concrete (Option 1), Fire Resistance 0 min Use certiie use non-cracke concrete cracke concrete speciic use natural stone = anchor iameter = anchor length t ix = ixable thickness = threa length = hole iameter = minimum hole epth = overall embement epth h e = eective anchorage epth = hole iameter in ixture = spanner = tightening torque SITA Zinc-plate steel anchor CE1 complete with preassemble nut an washer t ix h e TTSK0 S1K872/ TTSK06 S1K892/ TTSK17 S1K81/ TTSK170 S1K8147/ TTSK09 S1K92/ TTSK081 S1K1/ TTSK18 S1K132/ TTSK082 S1K162/ TTSK S1K3/ 3 3 TTSK11 S1K118/ TTSK19 S1K8/ TTSK190 S1K148/ TTSK S1K163/ TTSK23 S1K178/ TTSK0 S1K163/ 3 6 TTSK13 S1K16138/ S1K16148/ TTSK S1K16168/ TTSK13 S1K16178/
2 C.so Savona 22,29 Villastellone (TO), Italia rev. 01/1 p. 2/ boy col orge steel white zinc plating µm ISO 4042 clip col rolle steel strip 147 hot ip galvanizing 147 nut steel grae 8 (DIN 934, ISO 4032) washer steel (DIN, ISO 7089) white zinc plating µm ISO 4042 SITA Stainless steel anchor CE1 AISI 316 (A4), complete with preassemble nut an washer t ix h e SI1K872/ SI1K892/ SI1K81/ SI1K92/ SI1K2/ SI1K1/ SI1K132/ SI1K3/ SI1K118/ SI1K8/ SI1K148/ SI1K163/ SI1K163/ SI1K16138/ SI1K16168/ boy col orge stainless steel W clip col rolle stainless steel strip nut stainless steel grae 80 (DIN 934, ISO 4032) washer stainless steel (DIN, ISO 7089) -
3 C.so Savona 22,29 Villastellone (TO), Italia rev. 01/1 p. 3/ SITA HDG steel anchor CE1 Hot-Dip Galvanize, complete with preassemble nut an washer t ix h e TTSKHDG01 1 SI1K62/ TTSKHDG02 SI1K92/ TTSKHDG03 SI1K1/ TTSKHDG04 SI1K132/ TTSKHDG0 SI1K3/ 3 3 TTSKHDG06 SI1K8/ TTSKHDG07 SI1K163/ TTSKHDG08 SI1K16138/ TTSKHDG09 1 SI1K170/ TTSKHDG 1 SI1K2/ not inclue in CE certiication, recoene or non-cracke concrete only boy col orge steel hot ip galvanizing ISO 684 clip col rolle steel strip 147 hot ip galvanizing 147 nut steel grae 8 (DIN 934, ISO 4032) washer steel (DIN, ISO 7089) hot ip galvanizing ISO 684 Installation Setting parameters size M8 M M M16 Mx62 1 M 1 minimum spacing s min with c c minimum ege istance c min with s s minimum thickness o base material h min not inclue in CE certiication, recoene or non-cracke concrete only Strength ata Vali or a single anchor, isolate an ar rom the eges, on a thick concrete member o class C/2. o Non-cracke concrete aracteristic resistance size M8 M M M16 tension N Rk kn zinc-plate an HDG V Rk kn stainless steel V Rk kn
4 C.so Savona 22,29 Villastellone (TO), Italia rev. 01/1 p. 4/ Design resistance size M8 M M M16 tension N R kn zinc-plate an HDG V R kn stainless steel V R kn Recoene loa size M8 M M M16 Mx62 1 M 1 tension N rec kn zinc-plate an HDG V rec kn stainless steel V rec kn not inclue in CE certiication, recoene or non-cracke concrete only 1 kn 0 kg steel ailure o Cacke concrete aracteristic resistance size M8 M M M16 tension N Rk kn 9 zinc-plate an HDG V Rk kn stainless steel V Rk kn Design resistance size M8 M M M16 tension N R kn zinc-plate an HDG V R kn stainless steel V R kn Recoene loa size M8 M M M16 tension N rec kn kn 0 kg steel ailure zinc-plate an HDG V rec kn stainless steel V rec kn aracteristic resistances N Rk e V Rk erive rom values certiie in ETA-/0076. Design resistances N R e V R inclue partial saety actors on resistances or each size. Recoene loas N rec e V rec inclue the urther saety actor 1.4. For the esign o anchors with reuce spacing, with reuce ege istance, or or ixing on concrete with higher strength or with reuce thickness, reer to European Technical Approval ETA-/0076 an use Design Metho A outline in Annex C o ETAG 001 (issue by EOTA). For the esign o anchors uner ire exposure reer to European Technical Approval ETA-/0076 an Technical Report TR 0 issue by EOTA. Data or esign Critical spacing an istances size M8 M M M16 critical spacing critical ege istance s cr,n s cr,sp c cr,n c cr,sp
5 C.so Savona 22,29 Villastellone (TO), Italia rev. 01/1 p. / Increasing actors or tension resistance (excluing steel ailure) C2/30 1,04 C30/37 1, Ψ c C3/4 1,16 C40/0 1, C4/ 1,24 C0/60 1,28
General Information. Installation Information Design Information Material Information Ordering Information
General Information General Information PTBPRO Throughbolt ProDUCT DESCRIPTION The PTBPRO is a fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance in
HIGH PERFORMANCE STEEL ANCHORS
Throughbolt zinc plated, -HD Throughbolt hot dip galvanized anchor name BASE MATERIALS: concrete, stone non-cracked concrete PRODUCT CODE -10080/20 -HD-06050/10 zinc coat type thread diameter length FEATURES:
Pure110-PRO. System Components. Grades. General Information. Installation Information
General Information SECTION CONTENTS Pure11PRO General Information Installation Information Epoxy Injection Adhesive Anchoring System Design Information ProDUCT DESCRIPTION The Pure11PRO is our latest
System Components. Grades. General Information Installation Information
General Information General Information SECTION CONTENTS Pure15PRO General Information Installation Information Epoxy Injection Adhesive Anchoring System Design Information ProDUCT DESCRIPTION The Pure15PRO
HSA Carbon steel HSA-F Carbon steel hot-dipped galvanised with DIN 125 washer. HSA-R Stainless steel A4. HSA-BW Carbon steel with DIN 9021 washer
HSA stud anchor Anchor version Benefits HSA Carbon steel HSA-F Carbon steel hot-dipped galvanised with DIN 125 washer HSA-R Stainless steel A4 small edge distance and spacing three different embedment
EJOT Multifix VSF. EJOT Baubefestigungen GmbH In der Stockwiese BAD LAASPHE Germany
Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (3 01 64 68 82 82 Fax : (3 01 60 05 70 37 European Technical
T.I. Midwood Co Ltd Green Lane Wardle Nantwich Cheshire CW5 6BJ T: +44 (0) F: +44 (0)
Features and Benefits Version 05/07/2014 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Used in non-cracked and cracked concrete Fast
The cost-efficient fixing for flexible use in non-cracked concrete VERSIONS. Zinc-plated steel Stainless steel Hot-dip galvanised steel
The cost-efficient fixing for flexible use in non-cracked concrete VERSIONS APPROVALS Zinc-plated steel Stainless steel Hot-dip galvanised steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60,
Trutek TCM 385RE - Pure Epoxy 3:1
Features and Benefits Version 23/12/2013 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Ideal for deep embedment installations Used
Assessment Report. Stanley Black & Decker Deutschland GmbH Richard-Klinger-Str Idstein
Assessment Report Project 21827 condensed version Assessment of resistance under fire exposure of the Injection System AC200+ Employer Stanley Black & Decker Deutschland GmbH Richard-Klinger-Str.11 65510
Centre Scientifique et Technique du Bâtiment 4, avenue du Recteur Poincaré F PARIS Cedex 16 Tél. : (33) Fax : (33)
Centre Scientifique et Technique du Bâtiment 4, avenue du Recteur Poincaré F-75782 PARIS Cedex 16 Tél. : (33) 01 40 50 28 28 Fax : (33) 01 45 25 61 51 Autorisé et notifié conformément à l article 10 de
(English language translation, the original version is in French language) Upat Bolt
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
SPECIFICATION DATA. PIPE COVERING PROTECTION SADDLE #70 (1" Insulation) # 94/95 # 93 COVERING (LBS.) 3/4 1 9/ /16 2 1/2 7/ /16 5 3/8
PIPE OVERING PROTETION SALE #70 (1" Insulation) 3/4" through " arbon Steel omplies with MSS SP- and MSS SP-9 (Type 39). esigned to protect pipe insulation from crushing, enter rib starts at " IP IRON PIPE
Polyfixer PSF. Features and Benefits Version: 14/04/2015
Features and Benefits Version: 14/04/2015 Good bond strength with High load resistance Used with all grades of threaded rod Used in concrete and masonry Fast gelling and curing Used in dry and wet conditions
Poly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
FIXING SYSTEMS. TECHNICAL MANUAL Fixing Systems Terwa reserves the right to make changes to the documentation at any time Page 1
FIXING SYSTEMS WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW FIXING SYSTEMS BSR BSRS BSH BSHF Page 15 Page 16 Page 17 Page 18 BSRF BSRFS BSX HBU
Technical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
Declaration of Performance DoP MOVISE-en
Declaration of Performance DoP MOVISE-en 1. Product type: Vinyleter bonded anchor MOVISE 2. Identification: MOVISE300 Vinyleter bonded anchor 300 ml MOVISE410 Vinyleter bonded anchor 410 ml 3. Intended
BUFFALO - XP. A StongFast Product. For more information call Or log on to
Features and Benefits Version: 25/09/2017 Good bond strength with High load resistance Used with all grades of threaded rod Used in concrete and masonry Fast gelling and curing Used in dry and wet conditions
(English language translation, the original version is in French language) FM 753
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
Bolt FBN The heavyweight.
120 The heavyweight. OVERVIEW II, A4, stainless steel A4 Approved for: Non-cracked concrete C20/25 to C50/60 Also suitable for: Concrete C12/15 Natural stone with dense structure -GS (with large washer),
Triple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
High-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
Sine encoders Insulated through hollow shaft ø inch sinewave cycles per turn
Features Rugge esign up to IP 67 protection Shock resistant up to 200 g s Insulating insert to prevent high shaft currents from amaging bearings Wie range voltage supply 4.75...30 VDC Precision 60 arc-secons
Zykon Bolt anchor FZA, zinc-plated steel. Zykon Internallythreaded. FZA-I, zinc-plated steel Zykon Through anchor FZA-D, zinc-plated steel
HIGH PERFORMANCE STEEL ANCHORS 129 The powerful and safe undercut anchor for cracked concrete. OVERVIEW DESCRIPTION Zykon Bolt anchor FZA, zinc-plated steel Zykon Internallythreaded anchor FZA-I, zinc-plated
DRIVE-TECHNOLOGY INKOMA - GROUP. Accessories for HSG, KSH, HSGK and DSH
INKOMGROUPINKOM DRIVETECHNOOGY GROUP ccessories HSG, KSH, HSGK an DSH INKOMGROUP Heaoffice Sitz er INKOM Maschinenbau GmbH Neue Reihe 44 D 38162 Schanelah Germany phone: +49/(0)5692210 fax: +49/(0)569221
Incremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system)
Features HS35P with insulate hollow shaft Robust inustrial encoer up to IP 67 protection Highly versatile fully programmable encoer Interchangeable bore size(s) using metal inserts Insulating sleeve to
(English language translation, the original version is in French language) PFG expansion bolt type LB, ES and SB
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
FEATURES APPLICATIONS. Technical data sheet VAS - VAS THREADED ROD. VAS Threaded Rod for use with the VAC Capsule System. UK-DoP-e13/0937, ETA-13/0937
- THREADED ROD Rod for use with the VAC Capsule System FEATURES UK-DoP-e130937, ETA-130937 Material Material: Carbon steel, zinc plated and blue passivated. Range: M8 - M30 APPLICATIONS Support Non-cracked
Technical features. Cam followers
AM FOLLOWERS Technical features am followers Naella cam followers are esigne to run irectly on various types of surface such as cams, ramps an slieways. In orer to satisfy the operating conitions impose
E2EM-X4X1 2M * E2EM-X4X2 2M Shielded E2EM-X8X1 2M * E2EM-X8X2 2M. M30 15 mm E2EM-X15C1 2M E2EM-X15C2 2M. M18 16 mm E2EM-X16MX1 2M E2EM-X16MX2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E_6_ Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for
Variable area flowmeter DFM 165 to 350
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D60 Vlotho Fon +9 (0) 57 33.7 990 Fax +9 (0) 57 33.7 99 00 www.asvstuebbe.e contact@asvstuebbe.e Variable area flowmeter DFM to 3 For all inustrial uses High
Rod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread
Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel
Inventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
Blue-Tip Screwbolt BT
Blue Tip Screwbolt hex head, white zinc plating BT Blue Tip Screwbolt hot dipped galvanised, white zinc plating BT-HDG Blue Tip Screwbolt hex head, stainless steel BT-SS Blue Tip Screwbolt countersunk
fischer Bolt anchor FAZ II
fischer Bolt anchor FAZ II The power anchor for highest demands NEW Bolt anchor FAZ II For highest demands Powerful and flexible The distinctive edge holds the expansion clip in position even with reinforcement
Tested fasteners for passive structural fire prevention
Resistance to fire Tested fasteners for passive structural fire prevention Tested according to the international standard temperature curve MFPA Leipzig GmbH Tested according to the international standard
ASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar
Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV
fischer Bolt anchor FAZ II The power anchor for highest demands.
fischer Bolt anchor FAZ II The power anchor for highest demands. Bolt anchor FAZ II For highest demands. Powerful and flexible. The distinctive holds the expansion clip in position even with reinforcement
S.C. Rulmenti S.A. Barlad Romania Republicii Street No
RAIAL BEARINGS (EXCEPTING TAPERE ROLLER BEARINGS) Tolerance class P eviations in µm Table 1 mp V mp K ia,,9,1 2,3, all normal moifie over up to high low max. max. max. max. max. high low low max.. 1) 2.
FULL COMPLEMENT NEEDLE BEARINGS
FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner
PVC AND CPVC PRESSURE PIPES ASTM D-1785 and F-441 Schedule 80
2 PVC AN CPVC PRESSURE PIPES ASTM -1785 an F-441 Scheule 80 PVC ASTM 1785 SCHEULE 80 NOMINAL OUTSIE IAMETER PVC SCHEULE 80 WALL THICKNESS WORKING PRESSURE WEIGHT IN IN MM IN MM PSI @73F LB/FT 10022 1/8
Anchor bolt FAZ II Millionfold proven anchor bolt and the strongest in its class.
118 FAZ II Millionfold proven bolt and the strongest in its class. OVERVIEW FAZ II, zinc-plated steel FAZ II A4, stainless steel of the corrosion resistance class III, e.g. A4 FAZ II C, highly corrosion-resistant
European Technical Assessment ETA-09/0355 of
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of
GS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
STEEL CUPBOARD LOCKS FIRE-HOSE CABINET LOCK
013 IRE-HOSE CABINET LOCK Designed for fire-hose cabinet Special fixing plate supplied for easy fixing lush design provides flat surface on cabinet Customized colours available ire hose cabinet BODY: KNOB:
VERSIONS. zinc-plated steel stainless steel highly corrosion-resistant steel BUILDING MATERIALS
Efficient fixing for cracked concrete VERSIONS APPROVALS zinc-plated steel stainless steel highly corrosion-resistant steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60, cracked Concrete
/00 RK 09/2017 EN RIVKLE. Blind rivet nuts and studs
9990000000 RK 09/20 N RIVK lin rivet nuts an stus RIVK 2 Page Principle an function 4 tanar RIVK blin rivet nuts 14 RIVK HRT - High Resistance Threa 36 HRT RIVK FC - For Fiber-reinforce polymer 38 FC RIVK
European Technical Assessment ETA-13/0900 of 10/04/2014
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
Planetary Servo-reducer. SRP Range. The Machine Tool Drives Company
Planetary Servoreucer SRP Range The Machine Tool Drives Company 1 Range Overview SRP Planetary Servoreucer Versatile Drive solution Hightech planetary reucer + universal flange : multiuse solution Flexibility,
Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
AZAM TECHINICAL DATASHEET ZA-CA ZA-TO ZA-TL ZA-AR ZA-PR ZA-ES ZA-GA ZA-AF ZA-GF APPLICATION EXAMPLES
Codes: C, T, ZTXXL, ZTXXC, E, A,G,AF, GF Reference: FT -en Date: 03/02/17 Revision: 3 Page: 1 of 6 ZA-CA ZA-TO ZA-TL ZA-PR ZA-ES ZA-AR ZA-GA ZA-AF ZA-GF CHARACTERISTICS BASE MATERIAL Wings and cone manufactured
D I S C C O U P L I N G S
DISC COUPINGS DISC COUPINGS MAIN FEATURES The isc coupling is of the continuous ring laminate metallic iaphragm type with blaes in stainless steel. The torque is transmitte in pure tension through alternate
Section 5. SYGEF Standard PVDF Piping System. Effective Jan. 16, See for updated info. P
Section 5 SYGEF Stanar PVF Piping System P0801084 Effective Jan. 16, 2012. See www.gfpiping.com for upate info. SYGEF Stanar Prouct Specification Material Color ensity Surface tension inear expansion coefficient
Linear Bearing General Information
1 Linear Bearing General Information 1-1 Characteristics of HIIN Linear Bearing HIIN linear bearings enable high precision linear motion on roun shafts by utilizing recirculating ball pathways. The patente
DICHIARAZIONE DI PRESTAZIONE No. HSL-3, HSL-3-R_B-1109-CPR-0002
IT DICHIARAZIONE DI PRESTAZIONE No. HSL-3, HSL-3-R_B-1109-CPR-0002 1. Codice di identificazione unico del tipo di prodotto: Hilti HSL-3, HSL-3-R 2. Utilizzo/i previsto/i: Prodotto Tasselli metallici da
Chapter 15 EMISSIONS TEST PROCEDURE FOR A VEHICLE EQUIPPED WITH A PERIODICALLY REGENERATING SYSTEM
Chapter 15 EISSIONS TEST PROCEDURE FOR A VEHICLE EQUIPPED WITH A PERIODICALLY REGENERATING SYSTE 1. INTRODUCTION This chapter efines the specific provions regaring type-approval of a vehicle equippe with
The Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use
C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are
CLAMPED PIPE SHOE EME-CS1 (1/2 8 )
CLAMPED PIPE SHOE EME-CS1 (1/2 8 ) Designed to eliminate field welding requirements for pipe supports. Ease of installation. Easy to install due to bolt system. Fields of application: Offshore and onshore
Declaration of Performance
Declaration of Performance 1343-CPR- 530-8/01.15 1. Unique identification code of the product-type: Injection anchors ungo IT-SP/IT-SPE Plus, IT-SP Winter for use in masonry 2. anufacturer: ungo Befestigungstechnik
JF375E JF300E JMN150E. Load Time T load (hrs) Range Data. Maximum Fixture Thickness. Drill Hole Diam.
Product Information The Epoxy 2 Part injection resin is suitable for use in solid concrete, solid brickwork and natural stone. It can be used for installing threaded studs, rebar or internal threaded sockets.
CAM LOCKS CAM LOCK DD-CC ZAMAK - CHROME DD-CC ZAMAK - BLACK COATED DD-CC PLASTIC C C D D. web
063 LOCK ø 063 1-1-DD-CC ZAAK - CHROE 063 1-2-DD-CC ZAAK - BLACK COATED 063 2-0-DD-CC PLASTIC Quarter-turn operation Body length 20.5 mm (Please be sure to order appropriate cam) Available in all die-cast
Pressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725
Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV DIBt* approve DIBt* approve High repeating accuracy, with union sockets or spigot ens Print / The optimal monitoring valves Sizes up to Operating
isosteelpress Business Partner USA: Biomass Systems Supply P.O. Box 1835 Chico, CA 95927, USA
H isosteelpress A www.isoplus.k Business Partner USA: Biomass Systems Supply P.O. Box 1835 Chico, CA 95927, USA Toll Free: 877-474-5521 Office: 530-893-2444 Fax: 530-893-2244 info@biomasssystemssupply.com
COMPFIRE SCFT-FP_20_55_ November 2010 Fin Plate Connection to Square Concrete-Filled Tube Test Result
Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack 16 November 2010 1 Oven Bar Link Bar View
/00 RK INOX 10/16 EN RIVKLE. Stainless steel blind rivet nuts and studs
999000000400 RK INOX 10/16 EN RIVKE tainless steel blin rivet nuts an stus RIVKE tainless steel Contents Page RIVKE tainless steel New prouct range 3 New thin hea esign 4 ubricate RIVKE range 5 RIVKE tu
STROKE BUSH SLIDE ROTARY BUSH STROKE BUSH
STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN
Other materials are available on request. Operating conditions
Merkel U-Ring T 18 Merkel U-Ring T 18 Asymmetrical sealing lip POM back-up ring PUR profile ring Profile ring Coe Harness Polyurethane 95 AU V142 95 Shore A Fig. 1 Merkel U-Ring T 18 Back-up ring Polyacetal
inst d u Building materials Approvals Qualities
No. Name 5 3 / 4 1 2 Material 1 Stud Zinc plated steel / A4 ( ) 2 Expansion sleeve A2 / A4 ( ) 3 Waser DIN 125A Zinc plated steel / A4 ( ) T inst t d fix f d u do SW l G No. Name l d nom ef Material 4
KROFTMAN CONTAINER SHELTER TC812
KROFTMAN CONTAINER SHELTER CONTENT FRAME P82-FR 82-0 82-02 82-03 82-0 82-05 82-06 82-07 parts list frame part numbers main frame base plan, frame plan available hight inside detail 0 detail 02, 03 Roof
Linear Bearing CONTENTS
Linear Bearing CONTENTS 1. Characteristics of Linear Bearing.... 2 2. Description... 2 3. Fitting... 3 4. Configuration an Specifications... 5 1. Inch AB Series: Stanar Close type, Clearance Ajustable,
BALL BEARINGS & STEEL SHAFTS
BA BEARINGS & STEE SHAFTS Every care has been taken to ensure the accuracy of the information containe in this catalogue, but no liability can be accepte for any errors or omissions. We reserve the right
E2ER/E2ERZ. Reduce Failures From Cutting Oil Ingress. Features. Applications. Patent Pending Heat-Sealing Method
Oil-resistant Proximity Sensors Reuce Failures From Cutting Oil Ingress Fluororesin cable withstans cutting oil Sealing metho eliminates gaps at cable joints Resin filling blocks ingress IP67G* egree of
DEE Shackle IS: ( Part- II ) DEE SHACKLE. Pin Diameter. Eye Outside Diameter. e min
EE Shackle IS: 6132-1971 ( Part- II ) φ φ S φ e EE SHACKLE Jaw Insie ith Insie Length Boy Material Pin Eye Outsie Safe orking Loa, Tonnes s=2.2 min e min Grae-30 Grae-40 Grae-63 Grae-80 18 40 10 12 24
k v max 1) [m 3 /h] [mm]
![k v max 1) [m 3 /h] [mm]](/thumbs/92/110251352.jpg "k v max 1) [m 3 /h] [mm]")
Technical ata sheet D6..N Wafer type butterfly valves, for shut-off functions in open an close col an hot water systems for switching heating an cooling machines on an off Overview of types Type k v max
Chemical fixing threaded rod
Chemical fixing threaded rod Technical data Type Mx110 M10x130 M12x160 M12x220 M16x190 M16x220 M20x260 d M M10 M12 M12 M16 M16 M20 L 110 130 160 220 190 220 260 t fix (max.) 17 2 36 5 42 67 65 Drill ø
Angular contact ball bearings
Angular contact ball bearings 7200 BE CB Y HC5 Nomenclature 1 2 3 4 1. esign: 2. Clearance: 3. Cage esigns: B BE A E NR N2 2Z 2RS1 40 contact angle 40 contact angle, high capacity, all ISO corners Conra
COMPFIRE. Reaction Frame. Camera 3. Macalloy Bars. Camera 2. Link Bar. Support Beam. Oven Bar. Camera 1. Jack Bar.
Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack 22 September 2010 1 Oven Bar Link Bar View
MXE SCREW DRIVE ACTUATORS
MXE SCREW RIVE ACTUATORS S SOLI BEARING P PROILE RAIL LINEAR SOLUTIONS MAE EASY THE MXE ELECTRIC ACTUATOR ESIGNE TO OUTLAST EVERY ROLESS ACTUATOR ON THE MARKET The MXE electric actuator is exactly what
Technical documentation Hilti System MQ channel installation hot-dip galvanised / stainless steel
Technical documentation Hilti System MQ channel installation hot-dip galvanised / stainless System MQ channel installation hot-dip galvanised page 1 System MQ channel installation hot-dip galvanised /stainless
Technical data sheet. Type overview. Technical data. Safety notes
Technical ata sheet 7..R For close col an warm water systems For water-sie moulating control of air-hanling an heating systems overview N kvs [ m³/h] Stroke PN Sv min. 711R 15 0.63 15 6 50 712R 15 1 15
60.07 Style 233 Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33 Restraine Flexible Coupling For Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33 carbon steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
MULTI-MONTI -plus THE NEW MULTI-MONTI WITH THE BIG PLUS
MULTI-MONTI -plus THE NEW MULTI-MONTI WITH THE BIG PLUS MMS-plus MULTI-MONTI -plus PRODUCT INFORMATION New Standard: hexagon head with combined washer Optimized concrete thread for higher efficiency More
Omslag. Main Catalogue EN
Omslag Main Catalogue EN We reserve the right to moify any specification an/or item shown in the present catalogue without notice. Information, photos, rawings an technical ata specifie in the publication
Tapper Concrete Screw Anchor
Tapper PRODUCT INFORMATION Tapper Conrete Srew PRODUCT DESCRIPTION The Tapper fastening system is a omplete family of srew anhors for light to meium uty appliations in onrete, masonry blok an brik base
Linear Bearing. 1. Linear Bearing General Information. 2. Configuration and Specifications. 1-1 Characteristics Description...
Linear Bearing 1. Linear Bearing General Information 1-1 Characteristics... 1 1-2 Description... 1 1-3 Fitting... 2 2. Configuration an Specifications 2-1 Metric Dimensuon 2-1-1 UB Series: Stanar Close,
1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
REBAR CONNECTION SYSTEM
REBAR CONNECTION SYSTEM WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW COUPLERS PSA PSA-PSC PSC-BOLT PSE Page 6 Page 6 Page 8 Page 9 TSE PSA-SS
REBAR CONNECTION SYSTEM
REBAR CONNECTION SYSTEM alterations reserved Mar-17 Page 1 PRODUCTS RANGE COUPLERS PSA PSA-PSC TSE PSA-SS Page 7 Page 9 Page 9 Page 10 PSAD TSED PSAG TSEG Page 11 Page 12 Page 13 Page 14 PSAGGD PSA TRANSITION
DECLARATION OF PERFORMANCE. No EN
DECLARATION OF PERFORMANCE No. 0008 - EN 1. Unique identification code of the product-type: fischer FIS GREEN 2. Intended use/es: Product Metal injection anchors for use in masonry Intended use/es For
COMPACT BEARING CR 2000
COMPACT BEARING CR 2000 Unreinforce elastomeric bearing loaable up to 20 N/mm² Bearing esign Contents Page Bearing esign formulae 2 Prouct escription 2 Shape factors 3 How to specify 3 Shear stiffness
60.08 Style 233S Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33S Restraine Flexible Coupling Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33S stainless steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
HepcoMotion. Ball Bushings Range.
HepcoMotion Ball Bushings Range www.hepcomotion.com Contents Super Ball Bushing - European Stanar SBE - Super European Close SBEO - Super European Open CS - Super European Pillow Block Close CSO - Super
Two-stage safety solenoid valves ZRLE/5, ZRDLE/5
Two-stage saety solenoid valves ZRLE/5, ZRDLE/5 6.22 Printed in Germany Edition 06.16 Nr. 214 7 1 6 Technical description The DUNGS saety solenoid valve ZR... is a two-stage automatic shut-o valve as per
CAST STEEL FLOATING BALL VALVE
CAST STEEL FLOATING BALL VALVE Stanar an Prouct Range Technical Innovation Design an Inspection Stanar: Pressure-Temperature Ratings Shell Wall Thickness Flange Face-to-face Dimensions Socket Wel & NPT
Stretching Tools: ITH-Stretch-Method
Stretching Tools: ITH-Stretch-Metho The ITH-Stretch-Metho is capable of highly accurate, repeatable results to a tight tolerance of ±2.5%. These results are possible because the ITH-Stretch-Metho is free
TECHNICAL CATALOGUE BALL VALVES: VIENNA
TECHNICAL CATALOGUE BALL VALVES: STANDARD LOW BALL VALVES: Suitable for domestic water ServiceS, heating, airconditioning plants and compressed air SyStemS. BALL VALVES 116 BALL VALVE, STANDARD LOW size
CATALOG 2017 SERIES 1
CTLOG 2017 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series
JETORQUE. Hydraulic Bolt Tensioner
SANIYA TOOLS An ISO 9001:2008 Company & CE Marked Products BOLT TIGHTENING SOLUTIONS JETOQUE Hydraulic Bolt Tensioner JETOQUE Bolt tensioning is now the preferred method of tightening bolts and studs on
Slewing Ring Bearings
Slewing Ring Bearings Wafangian Weiyuan Bearing Manufacturings Co.,Lt. Wafangian Weiyuan Bearing Manufacturings Co.,Lt. A: huhua Inustrial Park,Wafangian,alian,China el:+86-411-85584788 Fax:+86-411-85584896