JF375E JF300E JMN150E. Load Time T load (hrs) Range Data. Maximum Fixture Thickness. Drill Hole Diam.
|
|
|
- Angelina Houston
- 5 years ago
- Views:
Transcription
1 Product Information The Epoxy 2 Part injection resin is suitable for use in solid concrete, solid brickwork and natural stone. It can be used for installing threaded studs, rebar or internal threaded sockets. JF375E Features Specification Expansion free High loads Close and Edge Distance Can be used in dry, wet and flooded holes Suitable for use in cracked and non-cracked concrete JF300E Cartridge Temperature C Base Material Temperature C Useable time T work (mins) JMN150E Load Time T load (hrs) ETA 17/0011 Minimum +10 C +5 C C to +10 C C to +15 C +10 C to +15 C C to +20 C +15 C to +20 C C to +25 C +20 C to +25 C 18 8 WRAS Listing Number C to +30 C +25 C to +30 C C to +35 C +30 C to +35 C C to +40 C +35 C to +40 C 6 2 Ensure Cartridge Temperature is 10 C Note:- T work is the highest temperature in the range. T load is the lowest temperature in the range Grade 8.8 Chisel End Studs Zinc plated & yellow passivated min 5µm Stainless Steel Grade A4-70 Chisel End Studs Range Data Part Number Stud Length Maximum Fixture Thickness Drill Hole. Hole Depth Embedment Depth Fixture Clearance Hole Tightening Torque Stainless Steel Zinc Plated mm mm mm mm mm mm Nm JSTUD08110SSA4 JSTUD08110HT M JSTUD10130SSA4 JSTUD10130HT M JSTUD12160SSA4 JSTUD12160HT M JSTUD16190SSA4 JSTUD16190HT M JSTUD20260SSA4 JSTUD20260HT M JSTUD24300SSA4 JSTUD24300HT M JSTUD30380HT M For all embedment depths:- hole depth = embedment depth + 5mm For non standard embedment depths use threaded rod minimum grade 8.8 or A4-316 grade 70 Stainless Steel. Page 1 of 6 Version 4
2 Grade 8.8 Zinc Plated Studs Performance Data (C20/25 Uncracked Concrete) Grade 8.8 Zinc Plated Studs Performance Data (C20/25 Uncracked Concrete) Deep Embedment M8=85mm, M10=115mm, M12=140mm, M16=210mm, M20=260mm, M24=340mm, M30=530mm (Limited by grade 8.8 steel strength) Grade 8.8 Zinc Plated Studs Performance Data (C20/25 Uncracked Concrete) Shear Loads towards a free edge for all embedment depths are for single anchors where 3 x M8, M10 & M12 = Embedment Depth + 30mm 100mm. M16, M20, M24 & M30 = Embedment Depth + 2 x Drill Hole eter Page 2 of 6 Version 4
3 Grade 8.8 Zinc Plated Studs Performance Data (C20/25 Cracked Concrete) Grade 8.8 Zinc Plated Studs Performance Data (C20/25 Cracked Concrete) Deep Embedment *M8=145mm, * M10=185mm, M12=240mm, M16=320mm, M20=400mm, M24=480mm, M30=600mm (* Limited by grade 8.8 steel strength) Grade 8.8 Zinc Plated Studs Performance Data (C20/25 Cracked Concrete) Shear Loads towards a free edge for all embedment depths are for single anchors where 3 x M8, M10 & M12 = Embedment Depth + 30mm 100mm. M16, M20, M24 & M30 = Embedment Depth + 2 x Drill Hole eter Page 3 of 6 Version 4
4 Grade A4-70 Stainless SteelStuds Performance Data (C20/25 Uncracked Concrete) Grade A4-70 Stainless SteelStuds Performance Data (C20/25 Uncracked Concrete) Deep Embedment M8=80mm, M10=90mm, M12=110mm, M16=145mm, M20=200mm, M24=250mm, M30=375mm (Limited by grade 70 steel strength) Grade A4-70 Stainless Steel Studs Performance Data (C20/25 Uncracked Concrete) Shear Loads towards a free edge for all embedment depths are for single anchors where 3 x M8, M10 & M12 = Embedment Depth + 30mm 100mm. M16, M20, M24 & M30 = Embedment Depth + 2 x Drill Hole eter Page 4 of 6 Version 4
5 Grade A4-70 Stainless Steel Studs Performance Data (C20/25 Cracked Concrete) Grade A4-70 Stainless Steel Studs Performance Data (C20/25 Cracked Concrete) Deep Embedment M8=105mm, M10=135mm, M12=170mm, M16=235mm, M20=315mm, M24=380mm, M30=600mm (Limited by grade 70 steel strength) Grade A4-70 Stainless Steel Studs Performance Data (C20/25 Cracked Concrete) Shear Loads towards a free edge for all embedment depths are for single anchors where 3 x M8, M10 & M12 = Embedment Depth + 30mm 100mm. M16, M20, M24 & M30 = Embedment Depth + 2 x Drill Hole eter Page 5 of 6 Version 4
6 Influence of concrete strength Concrete strength C20/25 C30/37 C40/50 C50/60 Cylinder N/mm Cube N/mm Factor Non-cracked Cracked When using concrete factors ensure that loads do not exceed Steel Steel for single anchor M8 M10 M12 M16 M20 M24 M30 Tensile Shear kn kn Grade Stainless Steel Grade A Grade Stainless Steel Grade A4-70 For variations in structure thickness, reduced spacing and edge calculations download the free Anchor Calculation Program from Installation Instructions Drill correct diameter hole to correct depth Clean hole Blow x 2, Brush x 2 Blow x 2 Brush x 2 Blow x 2 Attach nozzle to cartridge Extrude first part to waste until an even colour is achieved Fill hole 1/3 to 1/2 full starting from the bottom of the hole Insert stud into base material by hand using a twisting motion Allow resin to cure Attach fixture Tighten with torque wrench to recommended torque JCP Construction Products, Unit 14 Teddington Business Park, Station Rd, Teddington, Middlesex TW11 9BQ Telephone jcpenquiries@owlett-jaton.com Web:- Page 6 of 6 Version 4
T.I. Midwood Co Ltd Green Lane Wardle Nantwich Cheshire CW5 6BJ T: +44 (0) F: +44 (0)
Features and Benefits Version 05/07/2014 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Used in non-cracked and cracked concrete Fast
Pure110-PRO. System Components. Grades. General Information. Installation Information
General Information SECTION CONTENTS Pure11PRO General Information Installation Information Epoxy Injection Adhesive Anchoring System Design Information ProDUCT DESCRIPTION The Pure11PRO is our latest
BUFFALO - XP. A StongFast Product. For more information call Or log on to
Features and Benefits Version: 25/09/2017 Good bond strength with High load resistance Used with all grades of threaded rod Used in concrete and masonry Fast gelling and curing Used in dry and wet conditions
Trutek TCM 385RE - Pure Epoxy 3:1
Features and Benefits Version 23/12/2013 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Ideal for deep embedment installations Used
Polyfixer PSF. Features and Benefits Version: 14/04/2015
Features and Benefits Version: 14/04/2015 Good bond strength with High load resistance Used with all grades of threaded rod Used in concrete and masonry Fast gelling and curing Used in dry and wet conditions
System Components. Grades. General Information Installation Information
General Information General Information SECTION CONTENTS Pure15PRO General Information Installation Information Epoxy Injection Adhesive Anchoring System Design Information ProDUCT DESCRIPTION The Pure15PRO
Blue-Tip Screwbolt BT
Blue Tip Screwbolt hex head, white zinc plating BT Blue Tip Screwbolt hot dipped galvanised, white zinc plating BT-HDG Blue Tip Screwbolt hex head, stainless steel BT-SS Blue Tip Screwbolt countersunk
General Information. Installation Information Design Information Material Information Ordering Information
General Information General Information PTBPRO Throughbolt ProDUCT DESCRIPTION The PTBPRO is a fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance in
HIGH PERFORMANCE STEEL ANCHORS
Throughbolt zinc plated, -HD Throughbolt hot dip galvanized anchor name BASE MATERIALS: concrete, stone non-cracked concrete PRODUCT CODE -10080/20 -HD-06050/10 zinc coat type thread diameter length FEATURES:
AZAM TECHINICAL DATASHEET ZA-CA ZA-TO ZA-TL ZA-AR ZA-PR ZA-ES ZA-GA ZA-AF ZA-GF APPLICATION EXAMPLES
Codes: C, T, ZTXXL, ZTXXC, E, A,G,AF, GF Reference: FT -en Date: 03/02/17 Revision: 3 Page: 1 of 6 ZA-CA ZA-TO ZA-TL ZA-PR ZA-ES ZA-AR ZA-GA ZA-AF ZA-GF CHARACTERISTICS BASE MATERIAL Wings and cone manufactured
FEATURES APPLICATIONS. Technical data sheet VAS - VAS THREADED ROD. VAS Threaded Rod for use with the VAC Capsule System. UK-DoP-e13/0937, ETA-13/0937
- THREADED ROD Rod for use with the VAC Capsule System FEATURES UK-DoP-e130937, ETA-130937 Material Material: Carbon steel, zinc plated and blue passivated. Range: M8 - M30 APPLICATIONS Support Non-cracked
VF22PRO CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM
VF22PRO CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM APPROVAL DOC TDS MSDS Technical Data Sheet SEP 2016 For Install Support techadvice@allfasteners.com.au For Specification Support engineering@allfasteners.com.au
Chemical fixing threaded rod
Chemical fixing threaded rod Technical data Type Mx110 M10x130 M12x160 M12x220 M16x190 M16x220 M20x260 d M M10 M12 M12 M16 M16 M20 L 110 130 160 220 190 220 260 t fix (max.) 17 2 36 5 42 67 65 Drill ø
EF500R CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM
EF500R CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM [Seismic C2] APPROVAL DOC TDS MSDS Technical Data Sheet SEP 2019 For Install Support techadvice@allfasteners.com.au For Specification Support engineering@allfasteners.com.au
Zykon Bolt anchor FZA, zinc-plated steel. Zykon Internallythreaded. FZA-I, zinc-plated steel Zykon Through anchor FZA-D, zinc-plated steel
HIGH PERFORMANCE STEEL ANCHORS 129 The powerful and safe undercut anchor for cracked concrete. OVERVIEW DESCRIPTION Zykon Bolt anchor FZA, zinc-plated steel Zykon Internallythreaded anchor FZA-I, zinc-plated
HSA Carbon steel HSA-F Carbon steel hot-dipped galvanised with DIN 125 washer. HSA-R Stainless steel A4. HSA-BW Carbon steel with DIN 9021 washer
HSA stud anchor Anchor version Benefits HSA Carbon steel HSA-F Carbon steel hot-dipped galvanised with DIN 125 washer HSA-R Stainless steel A4 small edge distance and spacing three different embedment
The cost-efficient fixing for flexible use in non-cracked concrete VERSIONS. Zinc-plated steel Stainless steel Hot-dip galvanised steel
The cost-efficient fixing for flexible use in non-cracked concrete VERSIONS APPROVALS Zinc-plated steel Stainless steel Hot-dip galvanised steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60,
fischer Highbond FHB II
fischer Highbond FHB II The first compound anchor suitable for tensile zones approved worldwide for resin capsules and injection systems. New capsule can be loaded super fast! The multifunctional bonded
Bolt FBN The heavyweight.
120 The heavyweight. OVERVIEW II, A4, stainless steel A4 Approved for: Non-cracked concrete C20/25 to C50/60 Also suitable for: Concrete C12/15 Natural stone with dense structure -GS (with large washer),
VERSIONS. zinc-plated steel stainless steel highly corrosion-resistant steel BUILDING MATERIALS
Efficient fixing for cracked concrete VERSIONS APPROVALS zinc-plated steel stainless steel highly corrosion-resistant steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60, cracked Concrete
EJOT Multifix VSF. EJOT Baubefestigungen GmbH In der Stockwiese BAD LAASPHE Germany
Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (3 01 64 68 82 82 Fax : (3 01 60 05 70 37 European Technical
Construction. High-performance, 2-part epoxy anchoring adhesive. Product Description. Tests. Product Data Sheet Edition _1
Product Data Sheet Edition 2012-05_1 High-performance, 2-part epoxy anchoring adhesive Construction Product Description Uses Solvent-free, thixotropic, two part, epoxy resin-based, high performance anchoring
fischer Bolt anchor FAZ II
fischer Bolt anchor FAZ II The power anchor for highest demands NEW Bolt anchor FAZ II For highest demands Powerful and flexible The distinctive edge holds the expansion clip in position even with reinforcement
fischer Bolt anchor FAZ II The power anchor for highest demands.
fischer Bolt anchor FAZ II The power anchor for highest demands. Bolt anchor FAZ II For highest demands. Powerful and flexible. The distinctive holds the expansion clip in position even with reinforcement
fischer bonded anchor systems for cracked concrete Three systems one goal the maximum performance
fischer bonded anchor systems for cracked concrete Three systems one goal the maximum performance fischer composite anchor systems for cracked concrete at a glance. Page 3 The premium solution for cracked
Anchor bolt FAZ II Millionfold proven anchor bolt and the strongest in its class.
118 FAZ II Millionfold proven bolt and the strongest in its class. OVERVIEW FAZ II, zinc-plated steel FAZ II A4, stainless steel of the corrosion resistance class III, e.g. A4 FAZ II C, highly corrosion-resistant
inst d u Building materials Approvals Qualities
No. Name 5 3 / 4 1 2 Material 1 Stud Zinc plated steel / A4 ( ) 2 Expansion sleeve A2 / A4 ( ) 3 Waser DIN 125A Zinc plated steel / A4 ( ) T inst t d fix f d u do SW l G No. Name l d nom ef Material 4
fischer Hammerset anchor EA II
Now with reduced embedment depth Now with reduced embedment depth fischer Hammerset anchor EA II The mounting-friendly hammerset anchor for fast and secure fixing. ETA-07/0135 ETAG 001-4 Option 7 for non-cracked
fischer Product Range Direct Fastening
fischer Product Range Direct Fastening 2 Direct Fastening Power Drive F35 / F45 Stud Driver PAGE POWER DRIVE F35 STUD DRIVER (8 MM TOOL) 3 8 Power Drive F35 Stud Driver 3 Power Drive F35 Stud Driver Replacements
Declaration of Performance
Declaration of Performance 1343-CPR- 530-8/01.15 1. Unique identification code of the product-type: Injection anchors ungo IT-SP/IT-SPE Plus, IT-SP Winter for use in masonry 2. anufacturer: ungo Befestigungstechnik
BEST MANAGEMENT PRODUCTS, INC. The SNOUT OIL-WATER-DEBRIS SEPARATOR SPECIFICATIONS U.S. Patent # Canadian Patent #
1. PRODUCT NAME The SNOUT Oil-Water-Debris Separator U. S. Patent # 6126817 Canadian Patent # 2285146 2. MANUFACTURER Best Management Products, Inc. 53 Mt. Archer Rd. Lyme CT 06371 Phone: (800) 504-8008
Installation Instructions for Bike Fixtation. Bottle Fill and Bike Wash Stations Manual Rev. B
15540 Woodinville Redmond Rd NE, Suite A-200, 2647 37th Woodinville, Ave. S Unit WA 1, Minneapolis 98072 MN 55406 Phone: 425.483.7000 Phone: 612-568-3498 Email: salesandsupport@sportworks.com E-mail: info@bikefixtation.com
Tex-614-J, Testing Epoxy Materials
Overview Effective: August 1999 May 2000. This method covers various test procedures for epoxy materials specified under the TxDOT Material Specification DMS-6100, Epoxies and Adhesives. The test to be
Self-drilling anchor for plasterboard
Self-drilling anchor for plasterboard Type TP 12 TP 12-PLUS TP 27 TP 30-PLUS L 31 39 31 39 d 1 13 10,5 13 10,5 d 2 6 15,5 6 15,5 Grip range 0-12 0-12 12-27 5-30 thickness (min.) 10 10-13 10 10-13 Screw
fischer Superbond System
fischer Superbond System The universal solution for cracked concrete. ETA-12/0258 fischer Superbond System FSB: The universal solution for concrete. Advantages at a glance Variable of 60 600 mm Free choice
APPENDIX D. D.1 Macalloy Bars. Approximate safe working loads (kn) Appendix D - Proprietary Components (1/9) Stainless steel architectural ties
Appendix D - Proprietary Components (1/9) APPENDIX D D.1 Macalloy Bars Bar dia. mm Stressing ties Stainless steel stressing ties Stainless steel architectural ties High strength Tie rods grades precision
General purpose standard grade wallplugs for use with screw fixings.
WALLPLUGS & FRAME ANCHORS Wallplugs Plastic CODE COLOUR DRILL SIZE BOX per/1000 GNF01 Yellow 5.00 100 9.12 GNF02 Red 5.50 100 10.15 GNF03 Brown 7.00 100 12.20 GNF0 Blue 10.00 100 33.10 Wallplugs Nylon
Assessment Report. Stanley Black & Decker Deutschland GmbH Richard-Klinger-Str Idstein
Assessment Report Project 21827 condensed version Assessment of resistance under fire exposure of the Injection System AC200+ Employer Stanley Black & Decker Deutschland GmbH Richard-Klinger-Str.11 65510
POWER-STUD. Mechanical Anchors GENERAL INFORMATION SECTION CONTENTS. Stainless Steel Wedge Expansion Anchor
General Information Mechanical s GENERAL INFORMATION POWER-STUD Stainless Steel Wedge Expansion PRODUCT DESCRIPTION The Power-Stud anchor, is a fully threaded, torque-controlled, wedge expansion anchor.
MULTI-MONTI -plus THE NEW MULTI-MONTI WITH THE BIG PLUS
MULTI-MONTI -plus THE NEW MULTI-MONTI WITH THE BIG PLUS MMS-plus MULTI-MONTI -plus PRODUCT INFORMATION New Standard: hexagon head with combined washer Optimized concrete thread for higher efficiency More
ANCHORS AND FIXING SYSTEMS EDITION 1
ANCHORS AND FIXING SYSTEMS EDITION 1 ANCHORING AND FIXING EXPERTISE DeWALT is a recognised global leader in designing and manufacturing solutions for the construction industry with extensive expertise
Tex-614-J, Testing Epoxy Materials
Overview Effective Date: January 2001 - July 2002. This method covers various test procedures for epoxy materials specified under the TxDOT Material Specification "DMS-6100, Epoxies and Adhesives." The
Aspen Lift Part Number Spectrum Lane ~ Missoula MT ~
Aspen Lift Part Number 26010 7100 Spectrum Lane ~ Missoula MT 59808 800.791.8056 ~ www.spectrumproducts.com 26010 Man Rev H You have purchased a Spectrum Products Aspen II BP350 assisted access lift. Providing
Flexible Couplings. Large Diameter Coupling. Global leaders in flexible couplings, drainage & plumbing systems. Benefits
Flexible Couplings Large Diameter Coupling Flexseal can provide Large Diameter Couplings that are manufactured to order, thereby meeting the specific contractor and site requirements. Large Diameter Couplings
Expansion Fixing Systems
Expansion Fixing Systems Expansion fixing index and table of use. Specific use PHOTO SERIES SapiSelco Product Name Price List Page Concrete R Solid Brick Hollow Brick Aerated Concrete Block Plaster board
Handling Arm CHANGING CABLE PROCEDURE USER GUIDE
Handling Arm CHANGING CABLE PROCEDURE USER GUIDE Table of Contents 1. Installation Procedure...1 2. Wire Replacment Procedure...11 3. Contact Us...16 Installation Procedure 1 1. 2. 3. 4. 5. Determine the
BEST MANAGEMENT PRODUCTS, INC. The SNOUT INSTALLATION INSTRUCTIONS U.S. Patent # Canadian Patent #
PRODUCT NAME The SNOUT Oil-Water-Debris Separator U. S. Patent # 6126817 Canadian Patent # 2285146 MANUFACTURER Best Management Products, Inc. 53 Mt. Archer Rd. Lyme CT 06371 Phone: (800) 504-8008 Fax:
ANCHORS AND FIXING SYSTEMS EDITION 1
ANCHORS AND FIXING SYSTEMS EDITION 1 ANCHORING AND FIXING EXPERTISE DeWALT is a recognised global leader in designing and manufacturing solutions for the construction industry with extensive expertise
Midwest Roadside Safety Facility
22860 900" D D 914 36" 1000 39 3/8" SOIL AND TARMAC CUT-OUT CONCRETE TARMAC BRIDGE DECK B PLAN VIEW C A C 15 20 [3/4"] Deck Gap BRIDGE DECK A 3900 153 1/ Impact 30V 45720 1800" 34290 13" 11430 4" RAIL
Motion Trek Spectrum Lane ~ Missoula MT ~ Rev A
Motion Trek 350 153121 7100 Spectrum Lane ~ Missoula MT 59808 800.791.8056 ~ www.spectrumproducts.com 153121 Rev A You have purchased a Spectrum Products Motion Trek 350 assisted access lift. Providing
PUR-O-STOP FS-L. General Building Inspectorate Approval for curtain grouting CE-marking in accordance with EN
Technical Data Sheet Issue: 20-02-2017 PUR-O-STOP FS-L General Building Inspectorate Approval for curtain grouting CE-marking in accordance with EN 1504-5 Properties: PUR-O-STOP FS-L is a slow-hardening,
FIXING SYSTEMS. TECHNICAL MANUAL Fixing Systems Terwa reserves the right to make changes to the documentation at any time Page 1
FIXING SYSTEMS WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW FIXING SYSTEMS BSR BSRS BSH BSHF Page 15 Page 16 Page 17 Page 18 BSRF BSRFS BSX HBU
Centre Scientifique et Technique du Bâtiment 4, avenue du Recteur Poincaré F PARIS Cedex 16 Tél. : (33) Fax : (33)
Centre Scientifique et Technique du Bâtiment 4, avenue du Recteur Poincaré F-75782 PARIS Cedex 16 Tél. : (33) 01 40 50 28 28 Fax : (33) 01 45 25 61 51 Autorisé et notifié conformément à l article 10 de
B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
Declaration of Performance DoP MOVISE-en
Declaration of Performance DoP MOVISE-en 1. Product type: Vinyleter bonded anchor MOVISE 2. Identification: MOVISE300 Vinyleter bonded anchor 300 ml MOVISE410 Vinyleter bonded anchor 410 ml 3. Intended
L Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
The specialist for fastening technology. Post holders NEW. to our product range
Post holders H post anchors H post anchors Fork width Dimensions a) Drill holes b) Art. no. (mm) Overall/Post support (mm) Post support (mm) PU 904722 91 600 x 60 / 300 4 x 11 904723 101 600 x 60 / 300
COMPFIRE. Reaction Frame. Camera 3. Macalloy Bars. Camera 2. Link Bar. Support Beam. Oven Bar. Camera 1. Jack Bar.
Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack 22 September 2010 1 Oven Bar Link Bar View
TML TML. Socketless cast iron waste water system for civil engineering applications. Product information
TM TM waste water system for civil engineering applications Product information TM Product range, technical data TM waste water system for civil engineering applications TM product information Tough and
Freedom Lift. Part Number 57961
Freedom Lift Part Number 57961 You have purchased a Spectrum Products Freedom assisted access lift. Providing the unit is installed correctly and properly maintained, it will furnish you with many years
(English language translation, the original version is in French language) Upat Bolt
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
RECOMMENDED PROCEDURE FOR INSTALLATION OF DRILLCO MAXI-BOLT ANCHORS
RECOMMENDED PROCEDURE FOR INSTALLATION OF DRILLCO MAXI-BOLT ANCHORS Revision 0588VO By Drillco National Group P. O. Box 2182 Long Island City, NY 11102 Telephone: (800) 391-0052 www.drillcogroup.com techsupport@drillcogroup.com
Standard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
Security Is So Square
D OWN TOW N R AC K Security Is So Square The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
Fire Evaluation. From the original report n Date: 09/12/2013
Department Structures, Safety and Fire (DSSF) Division Mechanical Resistance and Fire (MRF) Fire Evaluation From the original report n 26048096 Date: 09/12/2013 1 st Issue Product: PURE150-PRO injection
Profile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
THE AquaBlast & RocketRide FUNSLIDES
THE AquaBlast & RocketRide FUNSLIDES ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH AquaBlast TM & RocketRide TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL
Tool 3-2 Rope pump installation check list for quality control, 3 rd Edition August 2016 Rope Pump INSTALLATION checklist for quality control A A1 Des
Rope Pump INSTALLATION checklist for quality control A A1 Site selection and preparations of the well before installation Hygiene and site selection Before the Rope pump is installed on a well, please
SHEET METAL FASTENERS
SHT MTAL FASTNRS Wherever you are... we have the solution! The P-FH / P-FHS SLF is a threaded fastener which incorporates a knurled platform under the head, which when embedded in the sheet, displaces
Rapid Lifting Anchor System. Connector Ring Clutch (t)
Rapid Lifting Anchor System The Rapid Lifting System primary purpose is to lift precast concrete with the help of its Rapid anchoring system, comprises of required dynamic load bearing anchor and required
QuickFit. Simple. Couplings & Flange Adaptors. Pioneers in pipe solutions. Close Tolerance Preassembled Fittings
Simple QuickFit Couplings & Flange Adaptors Close Tolerance Preassembled Fittings Pioneers in pipe solutions QuickFit Overview Dedicated Couplings & Flange Adaptors The QuickFit coupling range is designed
114 NOSE SEIKO CO.,LTD NOSE SEIKO CO.,LTD
114 NOSE SEIKO CO.,LTD NOSE SEIKO CO.,LTD 115 and Part Code Applicable axis diameter Feature Part Code 5 ~ 3 General purpose cam follower with screwdriver groove on the stud head. Available with stainless
Accessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
Section 02: Pre-Installation Procedures
Section 02: Pre-Installation Procedures Foundation! WARNING The MUST be placed on a surface that will support the combined weight of the, options, fixtures, and tooling, etc. (refer to the Specifications
RiLine mm system technology for the global market
60 system technology for the global market 02 RiLine60 Busbar systems 3 and 4 pole Support + bars + contact hazard protection Flat copper bar system, see 276 in HB 33 PLS busbar system, see 278 in HB 33
The Sika Solution x 600 x 700H / 900H. Class D. Roadway Installation Guidelines p 9-11
The Sika Solution Aluminium Jointing Chamber and Security Access Cover Set Package 1200 x 600 x 700H / 900H Class D Contents: Assembly Instructions p 2-8 Roadway Installation Guidelines p 9-11 Sika Technology
Injector Extraction Kit for the M9R / M9T
Work Instructions Injector Extraction Kit for the M9R / M9T 60385095 Tensile Force Limiter 60385229 page 1 of 40 page 2 of 40 Safety notice Important! Be sure to read these instructions before assembling,
CONTENTS CATEGORY A CATEGORY B CATEGORY C. Category A
Category A CONTENTS CATEGORY A EP CARTRIDGE TOOL, CARTRIDGES & NAILS 3 SK NAILS & TDM NAILS 5 RAPIDE NAILS & FUEL CELLS 6 & ITW NAILS & FUEL CELL 9 & 10 CATEGORY B FIING SELECTOR GUIDE 12 & 13 CHEMICAL
PV-ezRack SolarTerrace III-A Installation Guide V1.4
PV-ezRack SolarTerrace III-A Installation Guide V1.4 CONTENT 1. Introduction...2 2. Tools & Components...3 3. Installation Guide. 8 4. Service..15 Clenergy Australia 1/10 Duerdin St, Clayton VIC 3168 T:
INSTRUCTIONS 360 Y-DROP
INSTRUCTIONS 60 Y-DROP INSTRUCTIONS 60 Y-DROP INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The 60 Y-DROP unit should be precisely
Top-of-Pole Mount for 1 Module (TPM1) For Module Types A, B, C, D, E, F, & G ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation
Top-of-Pole Mount for 1 Module (TPM1) For Module Types A, B, C, D, E, F, & G ASSEMBLY INSTRUCTIONS step-by-step assembly and installation YOUR DISTRIBUTOR SOLIGENT 800-967-6917 www.soligent.net Version
REBAR CONNECTION SYSTEM
REBAR CONNECTION SYSTEM WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW COUPLERS PSA PSA-PSC PSC-BOLT PSE Page 6 Page 6 Page 8 Page 9 TSE PSA-SS
The Development of PSS (Pumpable Sheet metal Stiffener)
To Report# EX-350034 Date 7 th /April / 2015 The Development of PSS (Pumpable Sheet metal Stiffener) SUNSTAR ENGINEERING INC. Business HQ 3-1 Asahimachi Takatsuki Osaka 569-1195 JAPAN Phone +81-72-681-0351
Installation Manual. QuadGuard Elite QuadGuard Elite System. An Ideal Crash Cushion for Rigid Hazards. Proven-Effective Crash Cushions
QuadGuard Elite QuadGuard Elite System An Ideal Crash Cushion for Rigid Hazards A Member in High of the Frequency QuadGuard Impact Family Areas of Proven-Effective Crash Cushions ENERGY ABSORPTION SYSTEMS,
VIBRATING WIRE DISPLACEMENT TRANSDUCERS. JM Series. Roctest Limited, All rights reserved.
INSTRUCTION MANUAL VIBRATING WIRE DISPLACEMENT TRANSDUCERS Series Roctest Limited, 2014. All rights reserved. This product should be installed and operated only by qualified personnel. Its misuse is potentially
VERTICAL DELINEATION
VERTICAL DELINEATION www.usreflector.com ONE OF A KIND TECHNOLOGY FOR OUR TIMES MULTI APPLICATIONS SELF RE-ERECTING MARKER POSTS TEMPORARY OR PERMANENT BICYCLE LANES CROSSWALKS CHANNELIZATION BRIDGES URBAN
ARQUA STATION DF4 + DF7
The Arqua Station DF4 + DF7 is a complete system to provide fresh tap or filtered water to public spaces. This technical pack includes: Assembly and Installation guide Care and Maintenance For more information,
Aluminium sliding gate
Aluminium sliding gate Preparing pillars, brickwork and base Running the sleeves and wires Sliding gate conception Gate components Installing the guiding device on the pillar Installing the guiding post
METABO Power Tools Drills
212 50 Pennsylvania Avenue Warwick, Rhode Island 02888 Anchors Drilling, Tapping Strut Firestop Contractor BE560 3/8" Drill 00557 Robust split housing Long-life motor Torque 40 inch lbs. steel: 3/8" softwood:
VJ Technology Construction Fixings & Tools
VJ Technology Construction Fixings & Tools Own Brand Products Our own brand fixings, tools and ancillaries are made to the highest standards n Superior quality n Independently tested n Technically supported
TERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B
Reinforcement Couplers New_Layout 1 07/02/2017 15:41 Page 2 EURO ACCESSORIES TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B Reinforcement Couplers New_Layout 1 07/02/2017 15:41 Page
NODIA AND COMPANY. Model Test Paper - I GATE Machine Design. Copyright By Publishers
No part of this publication may be reproduced or distributed in any form or any means, electronic, mechanical, photocopying, or otherwise without the prior permission of the author. Model Test Paper -
Miller SkyORB Overhead Rotational Boom Anchor
Description The Miller SkyORB Anchor is a specially-engineered overhead rotational boom anchorage system, which provides a safe, mobile, easily accessible and viable fall arrest anchorage point for workers
Galaxy blue. Signal blue
nomad nomad model NO 100 in white. Cardinal red Burgundy Orange White Off white sand Black Light blue Signal blue Galaxy blue Purple Signal green Dark green Beige Gold Brown Neutral grey Signal yellow
Bolt Tensioning Technology for Wind Turbines
Bolt Tensioning Technology for Wind Turbines www.torcup.com WTB Series Fully aware of the difficulties associated with wind turbine blade tensioning, the new TorcUP WTB Series is a purpose designed range
Applications Profitronic 19 / Profitronic 19U
Applications Profitronic 19 / Profitronic 19U 54 Enclosure in variable length version using profile technology Standard construction or version with connection compartment Optional Polycarbonate transparent
REBAR CONNECTION SYSTEM
REBAR CONNECTION SYSTEM alterations reserved Mar-17 Page 1 PRODUCTS RANGE COUPLERS PSA PSA-PSC TSE PSA-SS Page 7 Page 9 Page 9 Page 10 PSAD TSED PSAG TSEG Page 11 Page 12 Page 13 Page 14 PSAGGD PSA TRANSITION
8210/ RIPP LOCK screw lock. Efficient and secure
8210/14.02 RIPP LOCK screw lock Efficient and secure RIPP LOCK lock washers The system RIPP LOCK lock washers have radial ribs on both sides. The contact angle at the foot of the ribs is obvious larger
Top-of-Pole Mount for 2 Modules (TPM2) For Module Types C, D, E, F, G, & H
Module Type Width Length C 22-27 56-63 D 31-33 60-67 E 38-40 51-53 F 38-42 58-62 G 37-42 61-67 H 38-40 77-78 Top-of-Pole Mount for 2 Modules (TPM2) For Module Types C, D, E, F, G, & H ASSEMBLY INSTRUCTIONS
(English language translation, the original version is in French language) FM 753
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément