Chemical fixing threaded rod
|
|
|
- Leslie Hutchinson
- 5 years ago
- Views:
Transcription
1 Chemical fixing threaded rod Technical data Type Mx110 M10x130 M12x160 M12x220 M16x190 M16x220 M20x260 d M M10 M12 M12 M16 M16 M20 L t fix (max.) Drill ø Allowable load in kn Concrete C20/25 5,9,1 11,4 11, ,9 t fix (max.) = Grip range (max.) Concrete C20/25; recommended load for non-cracked concrete. For VinyMaxx and AcryMaxx resins MAXXFAST Chemical fixing threaded rod MF50 Thread Metric thread Steel Surface treatment Zinc plated MAXXFAST 3055 Chemical fixing threaded rod MX M10X M12X MAXXFAST Chemical fixing threaded rod M12X M16X M16X M20X
2 Anchor threaded stud Maxima Technical data Type M M10 M12 M16 M20 M24 M30 D M M10 M12 M16 M20 M24 M30 L Nominal diameter of drill bit (d o ) Tightening torque in Nm Diameter of clearance hole in the fixture (d f ) Minimal thickness of concete member (h min. ) Depth of drilled hole to deepest point (h omin. -h omax. ) Thickness of the fixture (t fix.max. -t fix.min. ) Effective anchorage depth (h ef.min. -h ef.max. ) Spacing (S cr, N), characteristic Edge distance (C cr, N), characteristic Minimal spacing (S min. ) Minimal edge distance (C min. ) Allowable load in kn 5,3,3 13,2 19, 36,9 3 46,3 M - M16 are supplied including setting tool For a complete chemical anchor, the capsule and threaded stud (incl. nut and washer), have to be ordered separately. For further technical data the approval is available on request. Article groups Thread Surface treatment Code Page M St Zipl M St.St. A SPIT Anchor threaded stud Maxima P03A Thread Metric thread Steel Surface treatment Zinc plated Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request. M M M SPIT 70636Anchor threaded stud Maxima M M M M SPIT Anchor threaded stud Maxima P03B Thread Metric thread Stainless steel A4 SPIT 70646Anchor threaded stud Maxima M M M
3 70646 SPIT Anchor threaded stud Maxima M M SPIT Anchor threaded stud Maxima M M
4 Chemical fixing threaded rod Technical data Type Mx 110 M10x 130 M10x 165 M10x 190 M12x 160 M12x 220 M12x 250 d M M10 M10 M10 M12 M12 M12 M12 M16 M16 M16 M20 M20 M24 M30 L t fix (max.) Allowable load in kn Concrete 6,3 7,9 7,9 7,9 11,9 11,9 11,9 11,9 19, 19, 19, 29, 29, 37,7 67,5 t fix (max.) = Grip range (max.) Concrete C20/25 to C50/65; recommended load for non-cracked concrete. M12x 300 M16x 190 M16x 250 M16x 300 M20x 260 M20x 350 M24x 300 M30x 30 Article groups Thread Surface treatment Code Page M St Zipl M St.St. A FISCHER Chemical fixing threaded rod type RG M N03B Thread Metric thread Steel Surface treatment Zinc plated FISCHER 6317 Chemical fixing threaded rod type RG M MX M10X M10X M10X M12X M12X FISCHER 6317 Chemical fixing threaded rod type RG M M12X M12X M16X M16X M16X M20X M20X M24X M30X FISCHER Chemical fixing threaded rod type RG M N03B Thread Metric thread Stainless steel A4 FISCHER 631 Chemical fixing threaded rod type RG M MX M10X M10X M12X M16X M20X M24X FISCHER Chemical fixing threaded rod type RG M
5 Setting tool For a complete chemical fixing, the resin capsule and threaded rod (incl. nut and washer) have to be ordered separately. Threaded rod type RG M can be installed with installation tool type M. These threaded rods are also suitable for injection system type FIS. For further technical data the approval is available on request. Assembly sequence 6319 FISCHER Setting tool N03B FISCHER 6319 Setting tool M M FISCHER Setting tool M M M M
6 Chemical anchor capsule Technical data Type d L Drill ø Drill depth (min.) M M10 10, M12 12, M16 16, M M M30 27, For a complete chemical anchor, the capsule and threaded stud (incl. nut and washer), have to be ordered separately. Article groups Code Page Glass Glass SPIT Chemical fixing resin capsule type EA P03A Glass M M M SPIT Chemical fixing resin capsule type EA Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request. M M M M
7 6316 FISCHER Chemical fixing resin capsule type RM N03A Glass Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request. R M R M R M FISCHER Chemical fixing resin capsule type RM R M R M R M R M
8 Injection cartridge Assembly data Article groups Code Page AcryMaxx VinyMaxx FIS VS FIS V FIS VS MAXXFAST Injection cartridge MF50 MAXXFAST 3050 Injection cartridge AcryMaxx High performance two component styrene free resin for anchoring threaded rod and internally threaded sockets in concrete. European Technical Approval and CE marking. Resistant to extreme temperatures (from -40 o C to +0 o C) after polymerisation. 310 ml. MAXXFAST 3050 Injection cartridge 3051 MAXXFAST Injection cartridge MF50 MAXXFAST 3051 Injection cartridge VinyMaxx Styrene free high performance resin for solid and hollow substrates. 310 ml. MAXXFAST Injection cartridge
9 63252 FISCHER Injection cartridge N03A FISCHER Injection cartridge FISCHER Injection cartridge Art.number FIS VS 300 T High performance hybrid mortar for high loads in almost all building materials. Universal mounting system for a wide range of applications on site. Expansion-free anchoring allows low spacing and edge distances. Extensive range of accessories for a wide variety of applications. The use of standard caulking gun is economically advantageous FISCHER Injection cartridge N03A FISCHER Injection cartridge V360S=FIS Incl. 2 static mixers Contents 360 ml VT30C=FIS Expansion-free anchoring with an optimal price/quality relation High-strength rapid-setting 2-component synthetic resin mortar Open cartridges can be used repeatedly Easy application with injection pistol, see article group No seperate mixing required Incl. 2 static mixers Contents 30 ml FISCHER Injection cartridge FISCHER Injection cartridge N03A FISCHER Injection cartridge VS150C Expansion-free chemical anchoring system for professional and semi-professional applications Styrene free hybrid resin mortar The 2 components are safely mixed together inside the static mixer A simple exchange of the static mixer allows the renewed use of cartridges after they have been opened Requires low application pressure for economical use Incl. ejection plunger and 2 static mixers Contents 145 ml Can be extruded from the cartridge with conventional sealant pistols FISCHER Injection cartridge
10 Injection tool MAXXFAST Injection tool MF50 MAXXFAST Injection tool Gun For VinyMaxx and AcryMaxx resins. MAXXFAST Injection tool FISCHER Injection tool N03C FISCHER Injection tool K FIS VT Suitable for injection cartridge type FIS VT 30 C FISCHER Injection tool FISCHER Injection tool N03A FISCHER Injection tool Static mixer Suitable for injection cartridge type FIS V Plastic FISCHER Injection tool FISCHER Injection tool N03A FISCHER Injection tool FIS AK Suitable for injection cartridge type FIS V 360 S and FIS VS 150 C. FISCHER Injection tool FISCHER Injection tool N03A FISCHER Injection tool 14/20 MM FISCHER Injection tool
11 Anchoring accessories Technical data Type 12x50 15x5 15x130 20x5 d o L Drill ø Drill depth (min.) Assembly depth (min.) Threaded rod size M6 M-M10-M12 M-M10-M12 M12-M MAXXFAST Anchoring accessories MF50 BLOW PUMP Plastic MIXING NOZZLE Plastic BRUSH WHITE mm BRUSH BLUE mm BRUSH RED mm ANCHOR SLEEVE Plastic Nylon (polyamide) 12x50 ANCHOR SLEEVE Plastic Nylon (polyamide) 15x
12 30596 MAXXFAST Anchoring accessories ANCHOR SLEEVE Plastic Nylon (polyamide) 15x130 ANCHOR SLEEVE Plastic Nylon (polyamide) 20x5 MAXXFAST Anchoring accessories
13 Injection system injection anchor sleeve Technical data Type FIS H16 x 5N FIS H1 x 5N FIS H20 x 5N FIS H12 X 1000 FIS H16 X 1000 FIS H22 X 1000 d L Drill ø Drill depth (min.) Assembly depth (min.) Threaded rod size M M10 M12 M6-M M10-M12 M12-M16 Assembly sequence Article groups Surface treatment Code Page Plastic PA St Zipl FISCHER Injection system injection anchor sleeve type FIS H N N03A Plastic Polyamide (nylon) FISCHER Injection system injection anchor sleeve type FIS H N FIS16X5MM FIS1X5MM FIS20X5MM FISCHER Injection system injection anchor sleeve type FIS H N FISCHER Injection system injection anchor sleeve type FIS H L N03A Steel Surface treatment Zinc plated FISCHER Injection system injection anchor sleeve type FIS H L d x L Art.number d x L Art.number d x L Art.number 12X1000MM X1000MM X1000MM FISCHER Injection system injection anchor sleeve type FIS H L
14 Chemical fixing internal threaded anchor Technical data Type RG x75 M5 I RG 10x75 M6 I RG 12x90 M I RG 14x90 M10 I RG 16x100 M12 I d L d 2 M5 M6 M M10 M12 Nominal diameter of drill bit (d o ) Diameter of clearance hole in the fixture (d f ) Minimal thickness of concete member (h min. ) Depth of drilled hole to deepest point (h o ) Effective anchorage depth (h ef ) Spacing (S cr, N), characteristic Edge distance (C cr, N), characteristic Minimal spacing (S min. ) Minimal edge distance (C min. ) Screw-in depth (min.-max.) N=Allowable load in kn 3,4 4,,7 13, 16,5 The allowable load is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class B25, in combination with boltclass 5. and/or stainless steel A4-70 and if the S cr, N and C cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out. For a complete chemical fixing, the resin capsule and internal threaded anchor have to be ordered separately. Setting tool is enclosed in each packing. Assembly sequence FISCHER Chemical fixing internal threaded anchor type RG MI N03A Thread Metric thread Steel Surface treatment Zinc plated FISCHER Chemical fixing internal threaded anchor type RG MI RG X75M 5I RG 10X75M 6I FISCHER Chemical fixing internal threaded anchor type RG MI RG 12X90M I RG 14X90M 10I RG 16X100M 12I
Self-drilling anchor for plasterboard
Self-drilling anchor for plasterboard Type TP 12 TP 12-PLUS TP 27 TP 30-PLUS L 31 39 31 39 d 1 13 10,5 13 10,5 d 2 6 15,5 6 15,5 Grip range 0-12 0-12 12-27 5-30 thickness (min.) 10 10-13 10 10-13 Screw
30500 MAXXFAST Wall plug UniFast MF50 Plastic Nylon (polyamide) d Art.number d Art.number d Art.number 5MM MM
Wall plug UniFast d 5 6 7 10 12 L 25 30 30 40 50 60 Drill ø 5 6 7 10 12 Drill depth (min.) 35 40 40 50 60 70 Chipboard screws 2,5-4 3,5-4 4-4,5 4,5-6 6- -10 Pull-out force for wood screw in kn Concrete
Polyfixer PSF. Features and Benefits Version: 14/04/2015
Features and Benefits Version: 14/04/2015 Good bond strength with High load resistance Used with all grades of threaded rod Used in concrete and masonry Fast gelling and curing Used in dry and wet conditions
fischer Highbond FHB II
fischer Highbond FHB II The first compound anchor suitable for tensile zones approved worldwide for resin capsules and injection systems. New capsule can be loaded super fast! The multifunctional bonded
Pure110-PRO. System Components. Grades. General Information. Installation Information
General Information SECTION CONTENTS Pure11PRO General Information Installation Information Epoxy Injection Adhesive Anchoring System Design Information ProDUCT DESCRIPTION The Pure11PRO is our latest
T.I. Midwood Co Ltd Green Lane Wardle Nantwich Cheshire CW5 6BJ T: +44 (0) F: +44 (0)
Features and Benefits Version 05/07/2014 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Used in non-cracked and cracked concrete Fast
Trutek TCM 385RE - Pure Epoxy 3:1
Features and Benefits Version 23/12/2013 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Ideal for deep embedment installations Used
BUFFALO - XP. A StongFast Product. For more information call Or log on to
Features and Benefits Version: 25/09/2017 Good bond strength with High load resistance Used with all grades of threaded rod Used in concrete and masonry Fast gelling and curing Used in dry and wet conditions
JF375E JF300E JMN150E. Load Time T load (hrs) Range Data. Maximum Fixture Thickness. Drill Hole Diam.
Product Information The Epoxy 2 Part injection resin is suitable for use in solid concrete, solid brickwork and natural stone. It can be used for installing threaded studs, rebar or internal threaded sockets.
System Components. Grades. General Information Installation Information
General Information General Information SECTION CONTENTS Pure15PRO General Information Installation Information Epoxy Injection Adhesive Anchoring System Design Information ProDUCT DESCRIPTION The Pure15PRO
fischer bonded anchor systems for cracked concrete Three systems one goal the maximum performance
fischer bonded anchor systems for cracked concrete Three systems one goal the maximum performance fischer composite anchor systems for cracked concrete at a glance. Page 3 The premium solution for cracked
The cost-efficient fixing for flexible use in non-cracked concrete VERSIONS. Zinc-plated steel Stainless steel Hot-dip galvanised steel
The cost-efficient fixing for flexible use in non-cracked concrete VERSIONS APPROVALS Zinc-plated steel Stainless steel Hot-dip galvanised steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60,
fischer Superbond System
fischer Superbond System The universal solution for cracked concrete. ETA-12/0258 fischer Superbond System FSB: The universal solution for concrete. Advantages at a glance Variable of 60 600 mm Free choice
Zykon Bolt anchor FZA, zinc-plated steel. Zykon Internallythreaded. FZA-I, zinc-plated steel Zykon Through anchor FZA-D, zinc-plated steel
HIGH PERFORMANCE STEEL ANCHORS 129 The powerful and safe undercut anchor for cracked concrete. OVERVIEW DESCRIPTION Zykon Bolt anchor FZA, zinc-plated steel Zykon Internallythreaded anchor FZA-I, zinc-plated
General Information. Installation Information Design Information Material Information Ordering Information
General Information General Information PTBPRO Throughbolt ProDUCT DESCRIPTION The PTBPRO is a fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance in
AZAM TECHINICAL DATASHEET ZA-CA ZA-TO ZA-TL ZA-AR ZA-PR ZA-ES ZA-GA ZA-AF ZA-GF APPLICATION EXAMPLES
Codes: C, T, ZTXXL, ZTXXC, E, A,G,AF, GF Reference: FT -en Date: 03/02/17 Revision: 3 Page: 1 of 6 ZA-CA ZA-TO ZA-TL ZA-PR ZA-ES ZA-AR ZA-GA ZA-AF ZA-GF CHARACTERISTICS BASE MATERIAL Wings and cone manufactured
VF22PRO CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM
VF22PRO CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM APPROVAL DOC TDS MSDS Technical Data Sheet SEP 2016 For Install Support techadvice@allfasteners.com.au For Specification Support engineering@allfasteners.com.au
EF500R CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM
EF500R CHEMICAL ANCHOR CHEMICAL INJECTION SYSTEM [Seismic C2] APPROVAL DOC TDS MSDS Technical Data Sheet SEP 2019 For Install Support techadvice@allfasteners.com.au For Specification Support engineering@allfasteners.com.au
Bolt FBN The heavyweight.
120 The heavyweight. OVERVIEW II, A4, stainless steel A4 Approved for: Non-cracked concrete C20/25 to C50/60 Also suitable for: Concrete C12/15 Natural stone with dense structure -GS (with large washer),
fischer Bolt anchor FAZ II
fischer Bolt anchor FAZ II The power anchor for highest demands NEW Bolt anchor FAZ II For highest demands Powerful and flexible The distinctive edge holds the expansion clip in position even with reinforcement
EJOT Multifix VSF. EJOT Baubefestigungen GmbH In der Stockwiese BAD LAASPHE Germany
Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (3 01 64 68 82 82 Fax : (3 01 60 05 70 37 European Technical
Price list Prices excluding VAT valid from 01 February 2014
1 Price list 2014 Prices excluding VAT valid from 01 February 2014 Contents CHEMICAL FIXINGS Resin, resin anchors, resin capsules, guns & accessories STEEL ANCHORS s, setting tools, wrenches, concrete
fischer Hammerset anchor EA II
Now with reduced embedment depth Now with reduced embedment depth fischer Hammerset anchor EA II The mounting-friendly hammerset anchor for fast and secure fixing. ETA-07/0135 ETAG 001-4 Option 7 for non-cracked
fischer Bolt anchor FAZ II The power anchor for highest demands.
fischer Bolt anchor FAZ II The power anchor for highest demands. Bolt anchor FAZ II For highest demands. Powerful and flexible. The distinctive holds the expansion clip in position even with reinforcement
Construction. High-performance, 2-part epoxy anchoring adhesive. Product Description. Tests. Product Data Sheet Edition _1
Product Data Sheet Edition 2012-05_1 High-performance, 2-part epoxy anchoring adhesive Construction Product Description Uses Solvent-free, thixotropic, two part, epoxy resin-based, high performance anchoring
weinor can hold you the safe, fast way to fix it properly
Brackets weinor can hold you the safe, fast way to fix it properly Fixing brackets Folding arm brackets We reserve the right to make technical alterations. December 06 www.weinor.co.uk Brackets 1 www.samsonawnings.co.uk
HSA Carbon steel HSA-F Carbon steel hot-dipped galvanised with DIN 125 washer. HSA-R Stainless steel A4. HSA-BW Carbon steel with DIN 9021 washer
HSA stud anchor Anchor version Benefits HSA Carbon steel HSA-F Carbon steel hot-dipped galvanised with DIN 125 washer HSA-R Stainless steel A4 small edge distance and spacing three different embedment
Declaration of Performance
Declaration of Performance 1343-CPR- 530-8/01.15 1. Unique identification code of the product-type: Injection anchors ungo IT-SP/IT-SPE Plus, IT-SP Winter for use in masonry 2. anufacturer: ungo Befestigungstechnik
Price List 2011 (06-V3)
1 Price List 2011 (06-V3) Prices excluding VAT valid from 01 June 2011 2 HOW TO USE THE TABLES - Please ensure you quote this number when placing your order. This action will speed up the ordering process.
FEATURES APPLICATIONS. Technical data sheet VAS - VAS THREADED ROD. VAS Threaded Rod for use with the VAC Capsule System. UK-DoP-e13/0937, ETA-13/0937
- THREADED ROD Rod for use with the VAC Capsule System FEATURES UK-DoP-e130937, ETA-130937 Material Material: Carbon steel, zinc plated and blue passivated. Range: M8 - M30 APPLICATIONS Support Non-cracked
inst d u Building materials Approvals Qualities
No. Name 5 3 / 4 1 2 Material 1 Stud Zinc plated steel / A4 ( ) 2 Expansion sleeve A2 / A4 ( ) 3 Waser DIN 125A Zinc plated steel / A4 ( ) T inst t d fix f d u do SW l G No. Name l d nom ef Material 4
Blue-Tip Screwbolt BT
Blue Tip Screwbolt hex head, white zinc plating BT Blue Tip Screwbolt hot dipped galvanised, white zinc plating BT-HDG Blue Tip Screwbolt hex head, stainless steel BT-SS Blue Tip Screwbolt countersunk
VERSIONS. zinc-plated steel stainless steel highly corrosion-resistant steel BUILDING MATERIALS
Efficient fixing for cracked concrete VERSIONS APPROVALS zinc-plated steel stainless steel highly corrosion-resistant steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60, cracked Concrete
Retaining ring for shaft - normal type
Retaining ring for shaft - normal type DIN 41 NF E22-163 BS 363-4 Technical data Nom.size shaft d1 Ring s Ring d 3 Ring d 4 Groove d 2 Groove m (H13) Groove n (min.) 3 0,4 2, 2,8 0,5 0,3 4 0,4 3, 8,6 3,8
HIGH PERFORMANCE STEEL ANCHORS
Throughbolt zinc plated, -HD Throughbolt hot dip galvanized anchor name BASE MATERIALS: concrete, stone non-cracked concrete PRODUCT CODE -10080/20 -HD-06050/10 zinc coat type thread diameter length FEATURES:
Centre Scientifique et Technique du Bâtiment 4, avenue du Recteur Poincaré F PARIS Cedex 16 Tél. : (33) Fax : (33)
Centre Scientifique et Technique du Bâtiment 4, avenue du Recteur Poincaré F-75782 PARIS Cedex 16 Tél. : (33) 01 40 50 28 28 Fax : (33) 01 45 25 61 51 Autorisé et notifié conformément à l article 10 de
Anchor bolt FAZ II Millionfold proven anchor bolt and the strongest in its class.
118 FAZ II Millionfold proven bolt and the strongest in its class. OVERVIEW FAZ II, zinc-plated steel FAZ II A4, stainless steel of the corrosion resistance class III, e.g. A4 FAZ II C, highly corrosion-resistant
MULTI-MONTI -plus THE NEW MULTI-MONTI WITH THE BIG PLUS
MULTI-MONTI -plus THE NEW MULTI-MONTI WITH THE BIG PLUS MMS-plus MULTI-MONTI -plus PRODUCT INFORMATION New Standard: hexagon head with combined washer Optimized concrete thread for higher efficiency More
(English language translation, the original version is in French language) Upat Bolt
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
fischer Product Range Direct Fastening
fischer Product Range Direct Fastening 2 Direct Fastening Power Drive F35 / F45 Stud Driver PAGE POWER DRIVE F35 STUD DRIVER (8 MM TOOL) 3 8 Power Drive F35 Stud Driver 3 Power Drive F35 Stud Driver Replacements
(English language translation, the original version is in French language) FM 753
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
General purpose standard grade wallplugs for use with screw fixings.
WALLPLUGS & FRAME ANCHORS Wallplugs Plastic CODE COLOUR DRILL SIZE BOX per/1000 GNF01 Yellow 5.00 100 9.12 GNF02 Red 5.50 100 10.15 GNF03 Brown 7.00 100 12.20 GNF0 Blue 10.00 100 33.10 Wallplugs Nylon
(English language translation, the original version is in French language) PFG expansion bolt type LB, ES and SB
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
PRODUCTS FOR WINDOWS. Chap. 1 - DIBIBLIND EXTENDING GRILLE D - 3
PRODUCTS FOR WINDOWS Chap. 1 - DIBIBLIND EXTENDING GRILLE D - 3 DIBIBLIND (1) Single leaf for window - Height of the key from the window sill: 250 mm W 600 650 750 850 950 1050 1150 H 649 749 849 949 1049
Expansion Fixing Systems
Expansion Fixing Systems Expansion fixing index and table of use. Specific use PHOTO SERIES SapiSelco Product Name Price List Page Concrete R Solid Brick Hollow Brick Aerated Concrete Block Plaster board
MIXPAC TM DB 2K Cordless two-component dispenser
MIXPAC TM DB 2K Cordless two-component dispenser Best versatility and highest reliability in its class! www.sulzer.com MIXPAC TM dispenser DB 2K Perfectly coordinated technology combined with a memory
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
Assessment Report. Stanley Black & Decker Deutschland GmbH Richard-Klinger-Str Idstein
Assessment Report Project 21827 condensed version Assessment of resistance under fire exposure of the Injection System AC200+ Employer Stanley Black & Decker Deutschland GmbH Richard-Klinger-Str.11 65510
The following pages are an excerpt from the North American Product Technical Guide, Volume 1: Direct Fastening Technical Guide, Edition 18.
The following pages are an excerpt from the North American Product Technical Guide, Volume 1: Direct Fastening Technical Guide, Edition 18. Please refer to the publication in its entirety for complete
Page 1 of 23 303-01C Engine - 3.2L Duratorq-TDCi (148kW/200PS) - Puma 2011-2014 Ranger Assembly Procedure revision date: 07/21/2016 Special Tool(s) / General Equipment Engine Base Part Number: 6L084 100-002
Number of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
Swellex Pumps and MAI Grout Pumps
Swellex Pumps and MAI Grout Pumps and Accessories from Atlas Copco Solutions from Materials Technology Swellex pumps from Atlas Copco The installation system for Swellex rock bolts consists of a high pressure
Declaration of Performance DoP MOVISE-en
Declaration of Performance DoP MOVISE-en 1. Product type: Vinyleter bonded anchor MOVISE 2. Identification: MOVISE300 Vinyleter bonded anchor 300 ml MOVISE410 Vinyleter bonded anchor 410 ml 3. Intended
Stanadyne Service Tools
13301 Pressure Regulator Sleeve Extractor All Pump Types 13336 5/32" Hex Screwdriver All Pump Types 13337 Small, Squeeze-to-Open Snap Ring Pliers All Pump Types 13366 Advance Test Window Assembly 13367
Compact. Compact Compact FF 30/50. Compact 30/50. Compact Wall 30/50. Compact Tile 30/50. Compact FF Tile 30/50
30/50 Wall 30/50 FF 30/50 Tile 30/50 FF Tile 30/50 TAF / Wall 30/50 See Modulo Complete set Installation video Easy Drain watertight wheelchair accessible The flattest in the world. With the Easy Drain
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
PIPE & CONDUIT SYSTEMS. Free Call:
PIPE & CONDUIT SYSTEMS Free Call: 1800 899 480 www.anchoragegroup.com.au Anchorage pipe supports are designed and manufactured in Australia by leading manufacturing company, Swift Metal Services. Offering
Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
Section 12. Contain-It Secondary Containment Piping System. Serviced by GF Little Rock
Section 12 Contain-It Secondary Containment Piping System Serviced by GF Little Rock Table of Contents Contain-It Pipe 12.4 Fittings 12.5 Terminations 12.7 Centralizers 12.8 Accessories 12.9 Adhesive Requirements
FIXING SYSTEMS. TECHNICAL MANUAL Fixing Systems Terwa reserves the right to make changes to the documentation at any time Page 1
FIXING SYSTEMS WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW FIXING SYSTEMS BSR BSRS BSH BSHF Page 15 Page 16 Page 17 Page 18 BSRF BSRFS BSX HBU
Messing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
Limit Switch - Prewired Type Metal Body
Limit Switch - Prewired Type Metal Body Sealed with epoxy resin al the base of the box Degree of protection IP67 Thermoplastic material or diecast zinc alloy body Positive Opening Operation Minimum Actuation
Maine Turnpike Authority
Company Name Total Bid Amount CPM Constructors - Freeport, ME $1,309,765.25 Scott Construction Corporation - Portland, ME $1,528,840.00 Wyman & Simpson Inc. - Richmond, ME $1,674,845.00 Page 1 of 10 CPM
Installation Instructions for Bike Fixtation. Bottle Fill and Bike Wash Stations Manual Rev. B
15540 Woodinville Redmond Rd NE, Suite A-200, 2647 37th Woodinville, Ave. S Unit WA 1, Minneapolis 98072 MN 55406 Phone: 425.483.7000 Phone: 612-568-3498 Email: salesandsupport@sportworks.com E-mail: info@bikefixtation.com
BEVEL GEARBOXES. Bevel gearboxes Advantages. Same mounting height no support plates required. Additional attachment options. Screw jack gearboxes
Bevel gearboxes Advantages Same mounting height no support plates required Screw jack gearboxes Bevel gearboxes The new ZIMM bevel gearboxes in the KSZ-H series have the same fitting height as the ZIMM
Special Applications Require Special Tools
Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110
Copyright Birkin Cars (Pty) Ltd
GROUP EIGHT 1st Edition UPHOLSTERY AND INTERIOR Assemblies included In this group: - 8.1 8.2 8.3 K3601 164AB K3601 161AB K3601 166AB CARPETS BACK REST PANEL SEATS Tools required for assembly of this group:
HYDRAULIC MIXING ATTACHMENTS
HYDRAULIC MIXING ATTACHMENTS STABILIZATION SOLIDIFICATION AND REMEDIATION EQUIPMENT FOR IN SITU TREATMENT OF: SOIL SLUDGE DREDGED MATERIAL CONTAMINATED SITES OIL & GAS DRILLING WASTE WWW.ALPINEMIXERS.COM
INOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
Technical Information. A U R O R A Konrad G. Schulz GmbH & Co. KG Tel.: /
1/8 Heater Mini Content: 1 Safety advises 2 Device description 3 Function description 4 Operation 5 Installation 6 Technical data 7 Maintenance 8 Spare parts 9 Optional accessories 10 Fault diagnosis A
PA1 - Piercing Nozzle System
Global Catalog PA1 - Piercing Nozzle System The Task Force Tips Transformer PA1 Piercing Nozzle System is designed to deliver water or foam solutions to areas inaccessible to the fire fighter. A series
ACCESSORIES CATALOGUE
ACCESSORIES CATALOGUE Spray technology Fluid handling Material extrusion Injection www.wiwa.com 1 WIWA ram presses and single post lifts 1.1 WIWA single and twin post ram presses WIWA holder for ram presses
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
DECLARATION OF PERFORMANCE. No EN
DECLARATION OF PERFORMANCE No. 0008 - EN 1. Unique identification code of the product-type: fischer FIS GREEN 2. Intended use/es: Product Metal injection anchors for use in masonry Intended use/es For
POWER-STUD. Mechanical Anchors GENERAL INFORMATION SECTION CONTENTS. Stainless Steel Wedge Expansion Anchor
General Information Mechanical s GENERAL INFORMATION POWER-STUD Stainless Steel Wedge Expansion PRODUCT DESCRIPTION The Power-Stud anchor, is a fully threaded, torque-controlled, wedge expansion anchor.
Transair: Advanced Pipe Systems Pocket Installation Guide [1/2"] [1"] [1 1/2"] [2"] [2 1/2"] [3"] [4"] [6"]
![Transair: Advanced Pipe Systems Pocket Installation Guide [1/2] [1] [1 1/2] [2] [2 1/2] [3] [4] [6]](/thumbs/93/113010388.jpg "Transair: Advanced Pipe Systems Pocket Installation Guide [1/2] [1] [1 1/2] [2] [2 1/2] [3] [4] [6]")
Transair: Advanced Pipe Systems Pocket Installation Guide [1/2"] [1"] [1 1/2"] [2"] [2 1/2"] [3"] [4"] [6"] Certifications and guarantees Offering a full range of diameters to fit your design needs. Transair
Dynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
PFEIFER makes the difference. Price List 03/2018 CONNECTING AND LIFTING SYSTEMS
CONNECTING AND LIFTING SYSTEMS PFEIFER makes the difference. List 03/2018 PFEIFER SEIL- UND HEBETECHNIK GMBH DR.-KARL-LENZ-STRASSE 66 DE-87700 MEMMINGEN PHONE Support +49 (0 ) 83 31-937-345 Sales +49 (0
SAB 128R and SAB 163R Mk4 Screw compressor units. Spare parts manual
SAB 128R and SAB 163R Mk4 Screw compressor units Spare parts manual en Spare Parts Manual SSaAB SAB128RandSAB163R Mk4 Spare Parts manual SAB 128R and SAB 163R Mk4 The screw compressor and unit can be
CAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
SCAFFOLD BRACKETS & FIXINGS CONTRACTOR RANGE PRICE LIST Issue Number 3. Hook Couplers
SCAFFOLD BRACKETS & FIXINGS CONTRACTOR RANGE PRICE LIST Issue Number 3 VR ACCESS SOLUTIONS LTD 1 Swan Courtyard Charles Edward Road Birmingham B26 1BU Tel: +4412 1707 4928 Fax: +4412 1707 5372 Email:info@vrscaffold.com
Round Fine Centering for the mold construction. The development. Advantages
Round Fine Centering for the mold construction The development Advantages Durability: for mass production Backlash-free for very precise mold alignment Shorter cycle times High initial load capacity at
PULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
CONVENTIONAL WORKHOLDING
simple. gripping. future. CONVENTIONAL WORKHOLDING 1 Avanti Quick Jaw Exchange System 14 Avanti 46 16 Avanti 18 Avanti 11 Profilo Contour Jaw System 112 Profilo 113 Profilo 114 Profilo Dual clamping vice
Injection Oilers, Micro Pumps
Injection Oilers, Micro Pumps 1-5012-4-US for minimal quantity metering Magnetic piston pump Injection oiler Micropump Grease metering P Metering pumps deliver and meter out lubricants. This piston pumps
Compressed Air Conditioning. accessories. One Stop Shop process reliable efficient economical high degree of reusability
Screwdriving technology Automation Air motors Air tools Compressed Air Conditioning and Accessories One Stop Shop process reliable efficient economical high degree of reusability DEPRAG offers a comprehensive
Butterfly valves PN6, PN10, PN16
4 131 ACVATIX Butterfly valves PN6, PN10, PN16 VKF41.. Grey cast iron housing EN-GJL-2 DN 40 200 k vs 4000 m 3 /h For fitting between PN 6, PN 10, PN 16 counter-flanges to ISO 7005 Metallic tight-closing
Check Valves. VC Series - Cartridge Mounting 500 Bar. Innovative Fluid Power. Bulletin 86624
VC Series - Cartridge Mounting 500 ar Innovative Fluid Power ulletin 86624 Issue 1.0 02.2010 VCC 500 ar General Information Check Valve with Standard Top Cap Section View with Standard Poppet Maximum Working
10. MOULD CLAMPING. 212 Moulding Supplies Edition 9 // POWER CLAMPS 10.2 STANDARD CLAMPS
10. MOULD CLAMPING 213 214 10.1 POWER CLAMPS 10.2 STANDARD CLAMPS 212 Moulding Supplies Edition 9 // www.mouldpro.com POWER CLAMPS POWER SLIDING CLAMP Part No. Thread Size h-min h-max s e1 d sw L e b c
LOCKBOLTS Konnect 8M x 25MM Metric Tape Measure & RIVETS
LOCKBOLTS & RIVETS 116 Sign up today for Konnect s new online store KonnectShop Available 24 hours a day, 7 days a week Buy online at any time via the easy to use Shopping Cart facility Browse & choose
Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
VERTICAL DELINEATION
VERTICAL DELINEATION www.usreflector.com ONE OF A KIND TECHNOLOGY FOR OUR TIMES MULTI APPLICATIONS SELF RE-ERECTING MARKER POSTS TEMPORARY OR PERMANENT BICYCLE LANES CROSSWALKS CHANNELIZATION BRIDGES URBAN
Level limit switch Series RF 3000 Selection list
Table of content Page Overview P2 Applications P4 ------------------------------------------------------------------------------------------------------------- RF 3100 Standard version P6 -------------------------------------------------------------------------------------------------------------
106 - B. High security safes Models Amsterdam
106 - B High security safes Models Amsterdam Price list 83 European standard PN-EN 1143-1:006, Class V, proved and certified by IMP, Cert. no. P41/69/007 (981) and fire-proof protection LFS 30 P in accordance
VJ Technology Construction Fixings & Tools
VJ Technology Construction Fixings & Tools Own Brand Products Our own brand fixings, tools and ancillaries are made to the highest standards n Superior quality n Independently tested n Technically supported
hotrod Cartridge Heaters
hotrod Cartridge Heaters hotrod Cartridge Heaters Components We provide our customers with an extensive portfolio of ments, thermal sensors and control technology. Since 1973, we have manufactured heating
Hahn Serie 60 AT. Universal hinge for versatile application. More modern look Improved technology
Hahn Serie 60 AT Universal hinge for versatile application! More modern look Improved technology 2 4 5 6 7 8 9 2 3 4 5 6 7 8 9 2 Hahn Serie 60 AT For all doors made from metal profile sections NEW! Uniform
Original Spare parts. for SpriMag and aisa internal COating MaChineS and OvenS
Original Spare parts for SpriMag and aisa internal COating MaChineS and OvenS INDEX 1 Index 1 Index 2 Paint Supply and Spraying Technology 2.1 Paint Supply 2.1.1 Pressure Pot 2.1.2 Paint Filter and Accessories
Sulzer Mixpac systems for 2-component adhesives Metering Mixing Dispensing For Industry Applications up to 20 L. Sulzer Chemtech
Sulzer Mixpac systems for 2-component adhesives Metering Mixing Dispensing For Industry Applications up to 20 L Sulzer Chemtech Sulzer Mixpac for Lower Costs and Improved Quality in Adhesive Applications