SAB 128R and SAB 163R Mk4 Screw compressor units. Spare parts manual

Size: px
Start display at page:

Download "SAB 128R and SAB 163R Mk4 Screw compressor units. Spare parts manual"

Transcription

1 SAB 128R and SAB 163R Mk4 Screw compressor units Spare parts manual en

2

3 Spare Parts Manual SSaAB SAB128RandSAB163R Mk4 Spare Parts manual SAB 128R and SAB 163R Mk4 The screw compressor and unit can be fitted with different equipment, depending on their functions and requirements. Some of these equipment is described in this instruction manual even though they are not fitted on your particular unit. A cross (x) in the following table indicates which variants that are fitted on your unit -- with the compressor no stated below. Compressor SAB 128 SAB 163 Type of drive Refrigerant Compressor no Designation (Male drive) R717 Other Instrumentation UNISAB II and manual regulation of the V i slide UNISAB II and automatic regulation of the V i slide Oil cooling Economizer system (ECO--system) Water-cooled oil cooler Refrigerant--cooled oil cooler Refrigerant injection into discharge pipe Vessel type Closed system and vessel type Open system and vessel type OWRF/OWTF OOSI BLI HESS EOSE SVER Ex-execution Both compressor and unit are safeguarded. EN

4 EN

5 Contents Contents This Spare Parts Manual contains the following Standard Documents: 19. Spare Parts Drawings

6 Contents

7 Table of Contents List of parts for SAB 128R Mk Spare parts survey for SAB 128 R Mk4 unit Tools for compressor SAB 128 R Mk List of parts for SAB 163R Mk Spare parts survey for SAB 163 R Mk4 unit Tools for compressor SAB 163 R Mk EN 18--0

8 List of parts for SAB 128R Mk 4 Pos. Designation Qty. Part no Compressor complete Compressor housing 10 Rotor housing, SAB Bearing cover at suction end 20 Suction cover for SAB O-ring x Cylindrical pin ø16 x Cylinder screw M12 x Plug with collar 1/2 RG Dowty-ring O-ring x Bearing cover at discharge end 40 Bearing cover Cylinder screw M10 x Adjusting screw Stop screw M6 x Plug with collar 1/8 RG Dowty-ring Cover for Vi-regulating cylinder 51 O-ring x Cylinder screw M10 x Cover for Vi-slide Shaft seal cover 81 O-ring x Cylinder screw M10 x Driving pin ø4 x Hose connecting branch 1/ Clear plastic hose 3/16 x 300 mm Cap cover 90 Cap cover O-ring x Cylinder screw M10 x Dowty-ring dia /11.84 x Plug with collar 1/8 RG Nozzle for bearing lubrication O-ring x Cover for slide stop 100 Cover O-ring x Cylinder screw M10 x Retainer for spindle bearings Cylinder screw M6 x Locking plate EN

9 Pos. Designation Qty. Part no Rotor and suction end bearings 110 Rotor set for SAB 128, HR Roller bearings Retainer pin for male rotor Spirolox-ring Washer for bearings Cylinder screw M12 x Driving pin ø4 x Retainer for female rotor Discharge end bearings, female rotor 130 Balance piston dia Radial roller bearings 40/90 x Four point bearings 40/90 x Shim dia. 70/90, for adjustment of distance between rotor and discharge ports Comprising: 1 of thickness 0.49 mm 1 of thickness 0.52 mm 1 of thickness 0.55 mm 1 of thickness 0.58 mm 1 of thickness 0.61 mm 1 of thickness 0.64 mm 1 of thickness 0.67 mm Discharge end bearings, male rotor 135 Balance piston dia Radial roller bearings 45/100 x Four point bearings 45/100 x Shim dia. 80/100, for adjustment of distance between rotor and discharge ports Comprising: 1 of thickness 0.49 mm 1 of thickness 0.52 mm 1 of thickness 0.55 mm 1 of thickness 0.58 mm 1 of thickness 0.61 mm 1 of thickness 0.64 mm 1 of thickness 0.67 mm Discharge end ports Discharge port (male rotor) Vi Discharge port (female rotor) Vi Discharge port (male rotor) AC-operation Vi Discharge port (female rotor) AC-operation Vi Cylinder screw M8 x Steel sealing ring ø13.5/8 x 4/ Plug with collar 3/8 RG Locking screw M10 x Adjusting screw M10 x Dowty-ring dia /17.35 x EN 18--2

10 Pos. Designation Qty. Part no Rotor adjustment parts 151 Inner cover (male rotor) O-ring x Inner cover (female rotor) O-ring x Nozzle for oil Shaft seal 160 Shaft seal type Inner shaft seal 165A Shaft seal cover B Balance piston C Slide ring with sleeve D Radial seal E Inner ring F O-ring x G O-ring x I Counter sunk screw M4 x J O-ring 14 x K Oil distribution ring L Spirolox-ring Suction filter 170 Suction filter Adjusting system for Vi -glider 180 Spindle for slide stop Sealing washer for slide stop Sealing ring 28/ O-ring x Axial ball bearing Vi-regulating slide 193 Cylinder screw M10 x Capacity slide Parts for suction gas inlet 251 Hexagon head screw M12 x O-ring x Cylinder screw M14 x Rev EN

11 Pos. Designation Qty. Part no Non-return valve 260 Non-return flap Intermediate flange O-ring dia x Hinge fastener Cylinder screw M8 x Hinge Shim 8 x 14 x Cylindrical pin dia. 8 x Sleeve for hinge Wave spring ø18.8 x ø13.2 x 0.2, h= Counter sunk screw M8 x Economizer 290 ECO-plug Cylinder screw M10 x O-ring x Cylinder screw M8x HLI inlet 300 HLI plug Cylinder screw M10 x O-ring x Parts for internal oil channel 320 Non-return valve EMB RVS Dowty-ring Plug with collar 3/4 RG Plug with collar 3/8 RG Dowty-ring A Nozzle for rotor injection (R717) B Nozzle for rotor injeciton (R22) Dowty-ring Plug with collar 1/4 RG Dowty-ring Plug with collar 3/8 RG Oil filter parts 450 Cover O-ring x O-ring x Locking nut M Cylinder screw M12 x Stay bolt Magnet Intermediate ring Rubber gasket EN 18--4

12 Pos. Designation Qty. Part no 470 Filter cartridge Gas outlet device O-ring x Cover Cylinder screw M12 x O-ring x Float switch Cylindrical pin 3 x Plug with collar 1/ Dowty-ring Plug with collar 3/ Dowty-ring Safety valve system Back pressure independent safety valve BSV8, 18 bar Back pressure independent safety valve BSV8, 20 bar Back pressure independent safety valve BSV8, 21 bar Back pressure independent safety valve BSV8, 22 bar Back pressure independent safety valve BSV8, 25 bar - Other valve types are available on request Connecting pipe, POV 40, ø Cylinder screw M12 x O-ring x Intermediate pipe with POV Cylinder screw M14 x O-ring x Safety valve cover O-ring x Male stud coupling Reducer 3/4 -- 3/8 RG Al. Ring 24/13 x Union nut G Nipple G3/8, NV Al. Ring 30/16 x Dowty-ring Cylinder screw M14 x Temperature/pressure transducers 751 Pressure transmitter at suction end Pressure transmitter after oil filter Pressure transmitter before oil filter Male stud coupling EMB VADKO Screw connection EMB VBDKO Temperature transmitter Temperature transmitter Dowty-ring EN

13 Spare parts survey for SAB 128 R Mk4 unit The following list comprises all components that can be fitted on a compressor unit. From this list we have selected the components that are used on a particular unit and which are indicated on the piping diagram of this instruction manual. The position numbers on the piping diagram are a reference to the Pos. columns of this list. The piping diagram is dedicated to the compressor number stated on page 1 of this instruction manual. The components in the shaded areas are variable. This may be due to voltage, refrigerant, approved pressure etc. On ordering spare parts it may be an advantage to receive them in sets selected for your specific compressor unit. A list of sets can had on request from SABROE s local representative. Pos. Designation Part no. Regulating & Control device PT1 PT2 PT3 PT4 TT5 TT6/7 GT8 GT9 UNISAB II Pressure transducer Pressure transducer See PT2 See PT2 Temperature transducer Temperature transducer Position transmitter (capacity) See GT bar bar PT UNISAB II Frontpanel CPU-module Relay print EPROM extractor EEPROM extractor EEPROM Jumpers 2 Fuses 1 Screw driver g EN 18--6

14 Pos. Suction: Designation Part no. 20 O-ring dia 132,94 x 3, Set of gaskets for SVA--ST Set of gaskets for SVA--ST Set of gaskets for SVA--ST , 48, 64 34, 35,47 Set of gaskets for SNV 8 Set of gaskets for SNV 8 or Set of gaskets for QDV Oil separator, general: 30 Sealing ring dia. 42/49 x 6, Refrigerant system Heating rod, 250 V Heating rod, 115 V Heating rod, 230 O-ring dia 52,07 x 2,62 Sight glass (sight glass) O-ring dia 329,57 x 5,33 55 Oil seperating element (for cover) Oil return: Oil return valve complete Repair kit Discharge: Set of gaskets for SVA--ST 65 O-ring dia 78,97 x 3,53 Safety valves: SFV 15 O--ring 15,54 x 2,62 Spring 20 bar Opening pressure Spring 25 bar Opening pressure DSV 32 gasket kit EN

15 Pos. Designation Part no. Oil system Flange connection, oil tube Gasket, dia 57/43 x O-ring dia 59,92 x 3,53 (compr.) Oil pump Set of gaskets for SVA B Filter element FIA D Set of gasket, SNV Set of gaskets for SVA Thermostatic three-way valve, type RT5 O-ring, Neoprene Thermo element, 48 C Capacity regulation Only HF/HM Solenoid valve block Valve housing EVM (NC) Gasket set for EVM (NC/NO) Coil 10 W 220 V 50/60 Hz 110 V 50/60 Hz 240 V 50/60 Hz Solenoid valve: Valve housing EVM (NO) Coil 10 W 220 V 50/60 Hz 110 V 50/60 Hz 240 V 50 Hz Throttle valve O--ring 10,82 x 1,78 O--ring4,47x1,78 Gasket 19/ EN 18--8

16 Pos Gasket set for SVA--ST Filter FA15: (When TEAT 20 is selected) Gasket set for FA15 Repair kit for FA15 Designation Part no Filter FA20: (When TEAT 85 is selected) HLI Oil cooling Gasket set for FA20 Repair kit for FA20 82 Solenoid valve EVRA15 (when TEAT 20 is selected) Gasket set (for EVRA 15) Repair kit (for EVRA 15) Coil 10 W 220 V 50/60 Hz g 110 V 50/60 Hz 240 V 50 Hz See pos Solenoid valve EVRA20 (when TEAT 85 is selected) Gasket set (for EVRA 20) Repair kit (for EVRA 20) Coil 10 W 220 V 50/60 Hz g 110 V 50/60 Hz 240 V 50 Hz See pos EN

17 Pos. Designation Part no. HLI Oil cooling Injection valve TEAT 20 Nozzle insert Nozzle insert Nozzle inset Nozzle insert Thermal part deg. C Thermal part deg. C Injection valve TEAT 85 Nozzle insert Nozzle insert Nozzle insert Thermal part : 20/85 068G G Injection valve PMFL 80 Gasket set Piston rod Spare parts set for coupling S952 size Compr. connections Sheets, bolts, nuts & slices Spacer bushing Stop screw M10 x Combination wrench 9/16 Compr. Box wrench 9/16 Tools Alignment motor - compressor Discs (motor up to IEC 280) Discs ( motor from IEC 315) Tools EN

18 Tools for compressor SAB 128 R Mk T EN

19 Line no A401 = Normal set (part no ) Line no. A402 = Extended set (part no ) Line no. B401 = Tools for coupling alignment (part no ) Line no. B402 = Tools for shaft seal removal, oil pump (part no ) Tool no. Designation Part no. A401 A402 B401 B402 1 Puller for bearings Thrust ring for the puller, female Thrust ring for the puller, male Tool for fitting the bearings Ring for the puller Tool for pressing out the rotors Tool for fitting the bearings Retaining cup for male rotor Retaining cup for female rotor Tool for dismounting the bearings Thrust washer Locking tool for rotor Punch f. locking the rotor Threaded pin M10 x Threaded pin M12 x Hexagon head screw M16 x Hexagon head screw M10 x Socket cap screw M8 x Socket cap screw M8 x Socket cap screw M10 x Socket cap screw M12 x Socket cap screw M12 x Nuts M Nuts M Nuts M Washer dia. 24/13 x Washer dia. 35/13 x Guide pin M16 x EN

20 Tool no. Designation Part no. A401 A402 B401 B Tool for adjusting the bearings Special screw for adjusting the bearings Eye bolt M Eye bolt M Alignment device for coupling Feeler gauge Tools for shaft seal removal, oil pump Consist of: 36,1 Puller for shaft seal, oil pump ,2 Cap screw M10 x ,3 Threaded pin M8 x ,4 Nut M ,5 Punch dia. 18 x ,6 Punch dia. 22/16,5 x Torque wrench (Ratchet) 5-50 Nm 1/ Torque wrench Nm (14 x 18) 1 42 Extension 1/ Converter for torque wench(14x18) - 1/ Hexagon bit adapter 1/2-4mm Hexagon bit adapter 1/2-5mm Hexagon bit adapter 1/2-6mm Hexagon bit adapter 1/2-8mm Hexagon bit adapter 1/2-10mm Hexagon bit adapter 1/2-14mm 1 45 Box spanner insert 1/2-19mm Box spanner insert 1/2-24mm Box spanner insert 1/2-27mm Box spanner insert 1/2-36mm Box spanner insert 1/2-1/ Open end spanner (14x18) - 19mm EN

21 Tool no. Designation Part no. A401 A402 B401 B Combination spanner 17mm Combination spanner 19mm Combination spanner 1/ Allen key for socket cap screw 3mm Allen key for socket cap screw 5mm Allen key for socket cap screw 6mm Allen key for socket cap screw 8mm Allen key for socket cap screw 10mm Allen key for socket cap screw 14mm Magnetic Fixture for dial indicator 1 53 Dial indicator Retaining ring pliers Retaining ring pliers Hammer Plastic hammer Steel punch 8 mm 1 57 Pliers for driving pin EN

22 List of parts for SAB 163R Mk 4 Hovedstykliste : Pos. Designation Qty. Part no Compressor complete, male, Man. Vi Compressor housing 10 Rotor housing, SAB 163 H Bearing cover at suction end 20 Suction cover for SAB 163 H O-ring x Cylindrical pin dia. 16 x Cylindrical screw M16 x Plug with collar 1/ AL gasket dia. 27/21 x 1, O-ring x Bearing cover at discharge end 40 Bearing cover Cylinder screw M10 x Adjusting screw M Stop screw M6 x Plug with collar 1/ Dowty-ring 20.75/13.74 x Cover for Vi-slide 51 O-ring x Cylinder screw M12 x Cover for slide housing Shaft seal cover 81 O-ring x Cylinder screw M12 x Driving pin dia. 4 x Hose connecting branch 1/ Clear plastic hose 3/16 x300 mm Cap cover 90 Cap cover O-ring x Cylinder screw M12 x Dowty-ring dia /11.84 x Plug with collar 1/ Nozzle for bearing lubrication O-ring x EN

23 Pos. Designation Qty. Part no Cover for slide stop 100 Cover forslide stop O-ring x Cylinder screw M12x Bearing housing Cylinder screw M6x Locking plate Rotor and suction end bearings 110 Set of rotors for SAB 163HR Radial roller bearings Spirolox-ring Washer for bearings Cylinder screw M16 x Driving pin dia. 4.0 x Retainer pin Discharge end bearings, female rotor 130 Balance piston dia Radial roller bearings dia. 55/120 x Four-point bearings dia. 55/120 x Set of shims dia. 100/120, for adjustment of distance between rotors and discharge ports Comprising: 1 of thickness 0.49 mm 1 of thickness 0.52 mm 1 of thickness 0.55 mm 1 of thickness 0.58 mm 1 of thickness 0.61 mm 1 of thickness 0.64 mm 1 of thickness 0.67 mm Discharge end bearings, male rotor 135 Balance piston dia Radial roller bearings dia. 60/130 x Four-point bearings dia. 60/130 x Set of shims, dia. 105/130, for adjustment of distance between rotor and discharge ports Comprising: 1 of thickness 0.49 mm 1 of thickness 0.52 mm 1 of thickness 0.55 mm 1 of thickness 0.58 mm 1 of thickness 0.61 mm 1 of thickness 0.64 mm 1 of thickness 0.67 mm EN

24 Pos. Designation Qty. Part no Discharge end ports 140 Discharge port (male rotor) Discharge port AC (male rotor) Discharge port (female rotor) Discharge port AC (female rotor) Cylinder screw M10 x Steel sealing ring dia. 16/10 x Plug with collar 3/ Locking screw M10 x Adjusting screw M10 x Dowty-ring dia /17.35 x Rotor adjustment parts 151 Inner cover (male rotor) O-ring dia x Inner cover (female rotor) O-ring dia x Shaft seal 160 Shaft seal type Inner shaft seal 165A Shaft seal cover B Balance piston C Slide ring with sleeve D Radiel seal E Inner ring F O-ring x G O-ring x I Counter sunk screw M6 x J O-ring x K Oil distribution ring L Spirolox-ring Suction filter 170 Suction filter Adjusting system for Vi slide 180 Spindle for slide stop Sealing washer for slide stop Sealing ring O-ring x Axial ball bearing ø42/25 x Vi regulating slide 193 Cylinder screw M10 x Capacity slide EN

25 Pos. Designation Qty. Part no Parts for suction gas inlet 251 Hexagon head screw M16 x O-ring dia x Non-return valve 260 Non-return flap Intermediate flange O-ring dia x Hinge fastener Cylinder screw M8 x Hinge Shim 8 x 14 x Cylindrical pin dia. 8 x Sleeve for hinge Wave spring ø18.8 x ø13.2 x 0.2, h= Counter sunk screw M8 x Cylinder screw M8 x Economizer 290 ECO-plug Cylinder screw M10 x O-ring x Cylinder screw M8 x HLI inlet 300 HLI plug Cylinder screw M10 x O-ring x Parts for internal oil channel 320 Non-return valvel EMB RVS Dowty-ring Plug with collar 1 RG Plug with collar 3/ Dowty-ring A Nozzle for rotor injection (R717) B Nozzle for rotor injection (R22) Dowty-ring Plug with collar 1/ Dowty-ring Plug with collar 1/ EN

26 Pos. Designation Qty. Part no Oil filter parts 450 Cover O-ring dia x O-ring dia x Locking nut M Cylinder screw M12 x Stay bolt Magnet Intermediate ring Rubber gasket Filter cartridge Gas outlet device O-ring dia x Cover Cylinder screw M12 x O-ring x Float switch Cylindrical pin ø3 x Plug with collar 1/ Dowty-ring Plug with collar 3/ Dowty-ring Safety valve system Back pressure independent safety valve BSV8, 18 bar Back pressure independent safety valve BSV8, 20 bar Back pressure independent safety valve BSV8, 21 bar Back pressure independent safety valve BSV8, 22 bar Back pressure independent safety valve BSV8, 25 bar Other valve types are available on request 701 Connecting pipe BSV8/POV 40/ Cylinder screw M12 x O-ring dia. 82,14 x 3, Intermediate pipe with POV Intermediate pipe with POV Cylinder screw M16 x O-ring dia. 113,89 x 3, Safety valve cover O-ring dia x Male stud coupling Reducer G3/4 --G3/ AL Ring 24/13x1, EN

27 Pos. Designation Qty. Part no 730 Union nut G Nipple G3/8 x ø30, NV AL Ring 30/16x1, Dowty-ring Cylinder screw M16 x Temperature/pressure transducers 751 Pressure transmitter at suction end Pressure transmitter after oil filter Pressure transmitter before oil filter Male stud coupling EMB VADKO Screw connection EMB VBDKO Temperature transmitter Temperature transmitter Dowty-ring EN

28 Spare parts survey for SAB 163 R Mk4 unit The following list comprises all components that can be fitted on a compressor unit. From this list we have selected the components that are used on a particular unit and which are indicated on the piping diagram of this instruction manual. The position numbers on the piping diagram are a reference to the Pos. columns of this list. The piping diagram is dedicated to the compressor number stated on page 1 of this instruction manual. The components in the shaded areas are variable. This may be due to voltage, refrigerant, approved pressure etc. On ordering spare parts it may be an advantage to receive them in sets selected for your specific compressor unit. A list of sets can had on request from SA- BROE s local representative. Pos. Designation Part no. Regulating & Control device PT1 PT2 PT3 PT4 TT5 TT6/7 GT8 GT9 UNISAB II Pressure transducer Pressure transducer See PT2 See PT2 Temperature transducer Temperature transducer Position transmitter (capacity) See GT bar bar PT UNISAB II Frontpanel CPU-module Relay print EPROM extractor EEPROM extractor EEPROM Jumpers 2 Fuses 1 Screw driver g EN

29 Pos. Suction: Designation Part no. 20 O-ring dia 190,09 x 3, Set of gaskets for SVA--ST Set of gaskets for SVA--ST Set of gaskets for SVA--ST , 48, 64 34, 35,47 Set of gaskets for SNV 8 Set of gaskets for SNV 8 or Set of gaskets for QDV Oil separator, general: Refrigerant system Sealing ring dia. 42/49 x 6,5 Heating rod, 250 V Heating rod, 115 V Heating rod, 230 O-ring dia 52,07 x 2,62 Sight glass (sight glass) O-ring dia 329,57 x 5,33 55 Oil seperating element (for cover) Oil return: Oil return valve complete Repair kit Discharge: Set of gaskets for SVA--ST 100 O-ring dia 120,4 x 3,53 Safety valves: SFV 15 O--ring 15,54 x 2,62 Spring 20 bar Opening pressure Spring 25 bar Opening pressure DSV 32 gasket kit EN

30 Pos. Designation Part no. Oil system Flange connection, oil tube Gasket, dia 75/61 x 2, O-ring dia 59,92 x 3,53 (compr.) Oil pump Set of gaskets for SVA B Filter element FIA Set of gasket, SNV Set of gaskets for SVA Thermostatic three-way valve, type RT5 O-ring, Neoprene Thermo element, 48 C Capacity regulation Only HF/HM Solenoid valve block Valve housing EVM (NC) Gasket set for EVM (NC/NO) Coil 10 W 220 V 50/60 Hz 110 V 50/60 Hz 240 V 50 Hz Solenoid valve: Valve housing EVM (NO) Coil 10 W 220 V 50/60 Hz 110 V 50/60 Hz 240 V 50 Hz Throttle valve O--ring 10,82 x 1,78 O--ring4,47x1,78 Gasket 19/ EN

31 Pos Gasket set for SVA--ST Filter FA15: (When TEAT 20 is selected) Gasket set for FA15 Repair kit for FA15 Designation Part no HLI Oil cooling 81 Filter FA20: (When TEAT 85 is selected) Gasket set for FA20 Repair kit for FA20 82 Solenoid valve EVRA15 (when TEAT 20 is selected) Gasket set (for EVRA 15) Repair kit (for EVRA 15) Coil 10 W 220 V 50/60 Hz g 110 V 50/60 Hz See pos V 50 Hz Solenoid valve EVRA20 (when TEAT 85 is selected) Gasket set (for EVRA 20) Repair kit (for EVRA 20) Coil 10 W 220 V 50/60 Hz g 110 V 50/60 Hz 240 V 50 Hz See pos EN

32 Pos. Designation Part no. HLI Oil cooling Injection valve TEAT 20 Nozzle insert Nozzle inset Nozzle insert Thermal part deg. C Thermal part deg. C Injection valve TEAT 85 Nozzle insert Nozzle insert Nozzle insert Thermal part : 20/85 068G G Injection valve PMFL 80 Gasket set Piston rod Spare parts set for coupling S952 size Compr. connections Sheets, bolts, nuts & slices Spacer bushing Stop screw M10 x Combination wrench 9/16 Compr. Box wrench 9/16 Tools Alignment motor - compressor Discs (motor up to IEC 280) Discs ( motor from IEC 315) Tools EN

33 Tools for compressor SAB 163 R Mk T EN

34 Line no. A401 = Normal set (part no ) Line no. A402 = Extendet set (part no incl ) Line no. B401 = Tools for alining the coupling (part no ) Line no. B402 = Tools for shaft seal removal, oil pump (part no ) Tools no. Designation Part no. A401 A402 B401 B402 1 Puller for bearings Thrust ring for the puller, female Thrust ring for the puller, male Tools for fitting the bearings Ring for the puller Tools for pressing out the rotors Tools for fitting the bearings Retaining cup for male rotor Retaining cup for female rotor Tools for dismounting the bearings Thrust washer Locking tool for rotor Bearing dia 42/25 x Punch f. locking the rotor Threaded pins M10 x Threaded pin M16 x Hexagon head screw M20 x Hexagon head screw M10 x Socket cap screw M8 x Socket cap screw M8 x Socket cap screw M10 x Socket cap screw M16 x Hexagon head screw M16 x Nuts M Nuts M Nuts M Washer dia. 45/17 x Guide pin M16 x Tools for adjusting the bearings EN

35 Tools no. Designation Part no. A401 A402 B401 B Special screw for adjusting the bearings Eye bolt M Alignment device for coupling Feeler gauge Tools for shaft seal removal, oil pump Consists of: 36,1 Puller for shaft seal, oil pump ,2 Cap screw M10 x ,3 Threaded pin M8 x ,4 Nuts M ,5 Punch dia. 18 x ,6 Punch dia. 22/16,5 x Torque wrench (Ratchet) 5-50 Nm 1/ Torque wrench Nm (14 x 18) 1 42 Extention 1/ Converter for torque wench(14x18) - 1/ Hexagon bit adaptor 1/2-5mm Hexagon bit adaptor 1/2-6mm Hexagon bit adaptor 1/2-8mm Hexagon bit adaptor 1/2-10mm Hexagon bit adaptor 1/2-14mm 1 45 Box spanner insert 1/2-19mm Box spanner insert 1/2-30mm Box spanner insert 1/2-36mm Box spanner insert 1/2-9/ Open end spanner (14x18) - 24mm Combination spanner 17mm Combination spanner 9/ EN

36 Tools no. Designation Part no. A401 A402 B401 B Allen key for socket cap screw 3mm Allen key for socket cap screw 5mm Allen key for socket cap screw 6mm Allen key for socket cap screw 8mm Allen key for socket cap screw 10mm Allen key for socket cap screw 14mm Magnetic Fixture for dial indicator 1 53 Dial indicator Retaining ring plier Retaining ring plier Hammer Plastics hammer Steel punch 10 mm 1 57 Plier for driving pin EN

37 19. Spare Parts Drawings 19. Spare Parts Drawings Table of Contents Drawings for SAB 128R Mk Drawings for SAB 163R Mk EN 19--0

38 19. Spare Parts Drawings A D I 165K 165J 165L A T15 165C 165G E 165F B A / List of parts SAB 128 R Mk EN

39 19. Spare Parts Drawings T15 S N Y AB B A B I1 I1 A J J AB M1 B N M1 S 2/ List of parts SAB 128 R Mk EN 19--2

40 19. Spare Parts Drawings T15 R B B F F C C D D E E A A 3/ Economizer Port SECTION C--C HLI Ports SECTION D--D 301 List of parts SAB 128 R Mk EN

41 19. Spare Parts Drawings / E C SECTION I1--I1 J--J SEE DETAIL A SAB 128 R Mk T15 List of parts EN 19--4

42 19. Spare Parts Drawings T / SEE DETAIL B MALE FEMALE SECTION S--S N--N List of parts SAB 128 R Mk EN

43 19. Spare Parts Drawings T SECTION B--B G--G / List of parts SAB 128 R Mk EN 19--6

44 19. Spare Parts Drawings A / SECTION A--A SAB 128 R Mk T15 List of parts EN

45 19. Spare Parts Drawings B 165G J A DETAIL B SCALE 1: E 165F 165I 165D 165C 165L 165K T15 SECTION M1--M DETAIL A SCALE 1:1 22 8/ List of parts SAB 128 R Mk EN 19--8

46 19. Spare Parts Drawings T15 G G SECTION H--H A SECTION F--F SECTION E--E / List of parts SAB 128 R Mk EN

47 19. Spare Parts Drawings T12_ B J A K L D 165I 165G 165C 165F 165E 165B A / List of parts SAB 163 R Mk EN

48 19. Spare Parts Drawings T12_0 A A D D C C E E B F F 2/ SECTIONC--C 300 List of parts SAB 163 R Mk EN

49 19. Spare Parts Drawings T12_ SECTION K--K L--L / List of parts SAB 163 R Mk EN

50 19. Spare Parts Drawings T12_ SECTION H--H I--I J--J 4/ SEE DETAIL A 165B 165F 165G 165J DETAIL A SCALE 1: E 165I 165C 165D L 165K 165A List of parts SAB 163 R Mk EN

51 19. Spare Parts Drawings T SECTION A--A 5/ List of parts SAB 163 R Mk EN

52 19. Spare Parts Drawings T12_0 250B SECTION B--B 6/ List of parts SAB 163 R Mk EN

53 19. Spare Parts Drawings T12_ SECTION G--G SECTION F--F 325A SECTION E--E 7/ SECTION D--D List of parts SAB 163 R Mk EN

54 19. Spare Parts Drawings W T12_0 C2 TT7 PT1 A D1 E2 Y B F2 A ø138 8/ x ø17.5 BC 250 8x M16X List of parts SAB 163 R Mk EN

55 19. Spare Parts Drawings T12_0 F1 P H Z G L K E1 I, Q, V D2 C1 94 ECONOMIZER PORT G M8X18 ø35 M10X18 R HLI PORT 9/ List of parts SAB 163 R Mk 4 H R28 R EN

56 19. Spare Parts Drawings T12_0 O M 35 N S S BC ø96 SCALE 1:2 10/ ø List of parts SAB 163 R Mk EN

List of parts for SAB 128 Mk 4

List of parts for SAB 128 Mk 4 List of parts for SAB 28 Mk 4 Pos. Compressor complete, HF 46-6 Compressor komplete, HM 46-7 Compressor housing 0 Rotor housing, SAB 28 30-052 Bearing cover at suction end 20 Suction cover for SAB 28 303-39

More information

List of parts for SAB 163 Mk 4

List of parts for SAB 163 Mk 4 03.0 List of parts for SAB 63 Mk 4 Relevant drawings 0662-740 Pos. Compressor complete, male, Man. V i 46-62 Compressor complete, female, Man. V i 46-63 Compressor complete, male, Auto. V i 46-64 Compressor

More information

List of Parts for Screw Compressor VMY 347 H and VMY 347 M Model 1994

List of Parts for Screw Compressor VMY 347 H and VMY 347 M Model 1994 00.08 List of Parts for Screw Compressor VMY 347 H and VMY 347 M Model 994 Relevant drawing: 0664-700 Unless otherwise stated, all measurements are in mm.) Pos. Designation Qty per comp. H M Used w/pos.

More information

List of Parts for Screw Compressor VMY 447 H and VMY 447 M Model 1994

List of Parts for Screw Compressor VMY 447 H and VMY 447 M Model 1994 00.08 List of Parts for Screw Compressor VMY 447 H and VMY 447 M Model 994 Relevant drawing: 0664-70 Unless otherwise stated, all measurements are in mm.) Pos. Designation Qty per comp. H M Used w/pos.

More information

SAB 202 Screw compressor units. S pa re parts m an ual

SAB 202 Screw compressor units. S pa re parts m an ual SAB 202 Screw compressor units S pa re parts m an ual en 1 Spare parts list for SAB 202 Pos Designation No Part no Complete compressor LF, aut Vi 4161059 Complete compressor LF, man Vi 4161060 Complete

More information

Spare parts for SMC & TSMC 108 Mk3 Type S-L and E

Spare parts for SMC & TSMC 108 Mk3 Type S-L and E 00.0 Spare parts for 04-06- & T Mk3 Type S-L and E Relevant drawings for compressor 00 Mk 3, S-L-E (delivered after 89.0) Cylinder liner ect. - T 04, 06, Mk 3 (after 89.0) 00 Mk 3 Cylinder liner ect. -

More information

Spare parts manual. HPX700Mk5 Reciprocating compressor unit

Spare parts manual. HPX700Mk5 Reciprocating compressor unit Spare parts manual 700Mk5 Reciprocating compressor unit Manual for Mk 5 Manual for Mk 5 Compressor type 704 706 708 72 76 Compressor no. Refrigerant R77 R744 Other Control Unisab III None Other Water-cooled

More information

Spare parts manual. HPO Reciprocating compressor unit

Spare parts manual. HPO Reciprocating compressor unit Spare parts manual en HPO 24-26-28 Reciprocating compressor unit Manual for HPO 24-26-28 Compressor type 24 26 28 Compressor no. Refrigerant R717 R410A R744 Other Control Unisab III None Other Water-cooled

More information

exploded drawing parts list 2012 AFTERMARKET spare parts for compressors -

exploded drawing parts list 2012 AFTERMARKET spare parts for compressors - exploded drawing parts list 2012 QUALITY AND SERVICE AT THE BEST PRICE FREEDOM consists in the ability to choose, without constraints, the solution that best suits our objectives and needs. As an INDEPENDENT

More information

Spare parts manual. HPC 100 Mk4 Reciprocating compressor unit

Spare parts manual. HPC 100 Mk4 Reciprocating compressor unit Spare parts manual en HPC 100 Mk4 Reciprocating compressor unit Spare parts manual for HPC Mk4 The reciprocating compressor and the unit may be fitted with different equipment, depending on their functions

More information

Spare parts manual SAB 83

Spare parts manual SAB 83 Spare parts manual SAB 83 Screw compressor unit ENG Spare parts Manual SAB 83 18. Parts list for SAB 83 18. Parts list for SAB 83 0662_811_ENG.fm Relevant drawing document: 0662-810 Pos. no. Designation

More information

Spare parts manual. HPC100Mk4LL Reciprocating compressor unit

Spare parts manual. HPC100Mk4LL Reciprocating compressor unit Spare parts manual en HPC100Mk4LL Reciprocating compressor unit Manual for HPC 100 Mk 4 LL Manual for HPC 100 Mk 4 LL Compressor type HPC 104 106 108 Compressor no. Refrigerant R717 R410A R744 Other Control

More information

Parts List Book CPE CPVS

Parts List Book CPE CPVS Code 2205 6010 04 Edition 08/2013 Oil-injected Rotary Screw Compressors Parts List Book CPE125-1 CPVS125-1 People.Passion.Performance. CONTENTS WARRANTY AND LIABILITY LIMITATION... 2 ORDERING SPARE PARTS...

More information

Repair Manual and Spare Parts List

Repair Manual and Spare Parts List Hydraulic Drive Unit Type Techn. Doc. No. 362 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580067000_Inst_en_Version_03 Repair General In general,

More information

CP3850 Series Grinders

CP3850 Series Grinders 1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1

More information

396 Series - General Parts

396 Series - General Parts MTU - Product Code 31-48 - 51 396 Series - General Parts Item Description Product_ Code On Hand Qty 0000535858 VALVE STEM SEAL 31 105 0165314283 BAYONET COUPLING 31 2 0165313783 BAYONET COUPLING 31 4 0165310683

More information

Revision

Revision Revision - 2.0-04-26-2017 www.mcscontrols.com CONTENTS I. HOW TO REPLACE CAPACITY SOLENOID VALVE... 1 I-1. DISMANTLE SOLENOID VALVE... 1 I-2. ASSEMBLE SOLENOID VALVE... 2 II. HOW TO CHANGE 4-STEP TO STEP-LESS

More information

This is trial version

This is trial version Z-Standards Contents (Alphabetical order, terms partly according to DIN 16750) A All dimensions shown in this catalogue are specified in mm, given tolerances refer to an ambient temperature of 20 C Prod.-No.

More information

Repair Manual and Spare Parts List

Repair Manual and Spare Parts List Pneumatic Drive Unit Type Techn. Doc. No. 352 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580027000_Inst_en_Version_02 Repair General In general,

More information

Remanufactured Transmissions, Spare Parts, and Kits Catalog

Remanufactured Transmissions, Spare Parts, and Kits Catalog S6-650 Spare Parts - Gearbox Housing Group 01.010 1319 301 025 Main Housing without Check Valve 005/006/045/046/049/050 1319 301 093 Main Housing without Check Valve 083/085/084/086 1319 301 084 Main Housing

More information

Reciprocating Compressors for industrial refrigeration GEA Grasso 10. Spare parts list (Original text) pador9111-pl10_7

Reciprocating Compressors for industrial refrigeration GEA Grasso 10. Spare parts list (Original text) pador9111-pl10_7 Reciprocating Compressors for industrial refrigeration GEA Grasso 10 Spare parts list (Original text) COPYRIGHT All Rights reserved. No part of this publication may be copied or published by means of printing,

More information

CP3850 Series Grinders

CP3850 Series Grinders 1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1106 020 2506 1 Crankcase (2) 2-11 2 0000 988 5217 1 Connector (2) 3 0000 988 5200 2 Connector (2) 4 1106 641

More information

Battery. As at: 01/25/10 Time:22:35

Battery. As at: 01/25/10 Time:22:35 Battery As at: 01/25/10 Time:22:35 Battery As at: 01/25/10 Time:22:35 Pos. Description Reference 01 Set of Gel batteries2x12v / 100 Ah (5 hours) 530.091 01 Set of wet batteries2x12v / 105 Ah (5 hours)

More information

VM / VML COMPONENT PARTS CATALOGUE

VM / VML COMPONENT PARTS CATALOGUE VM / VML REFRIGERATION COMPRESSOR COMPONENT PARTS CATALOGUE Ver. 2002 HASEGAWA CONTENTS Model VM / VML Compressor Description Parts # Crankcase Component Parts External Casing Fittings Covers & Gaskets

More information

CS24/25 SERIES CLUTCH SHIFT PTO

CS24/25 SERIES CLUTCH SHIFT PTO CS/ SERIES CLUTCH SHIFT PTO PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. CS/ PTO EXPLODED VIEWS Detail B Detail A Detail E Detail C Detail D DETAIL A OUTPUT SHAFT ASSEMBLY 7 CS/ STANDARD OUTPUT

More information

CS24/25 SERIES CLUTCH SHIFT PTO

CS24/25 SERIES CLUTCH SHIFT PTO CS/ SERIES CLUTCH SHIFT PTO PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. CS/ PTO EXPLODED VIEWS Detail B Detail A Detail E Detail C Detail D DETAIL A OUTPUT SHAFT ASSEMBLY 7 CS/ STANDARD OUTPUT

More information

COMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit

COMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit 09/97 CB-5C-050 Suggested Spare Parts for LB601 and LB601A Compressors: Part # Description Qty./ Unit Comm. Qty. 794099 Gasket Set - Buna-N, Aluminum T 1 1 1 794259 Suction Valve Sub-Assembly T 2 2 794279

More information

ROTARY VANE VACUUM PUMPS Exploded View DuraVane Rotary Vane Pumps Oil-Lubricated RVL212HH

ROTARY VANE VACUUM PUMPS Exploded View DuraVane Rotary Vane Pumps Oil-Lubricated RVL212HH Exploded View Pumps 95 SOUTH WOODLAND AVENUE, MICHIGAN CITY, IN 660-567 Please visit our website at Page Number Reference www.dekkervacuum.com DWG //05 Exploded View 95 SOUTH WOODLAND AVENUE, MICHIGAN

More information

LB601B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools

LB601B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools COMPRESSORS CB-5E-051 2011/06 LB601B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 794099 Top End Repair Kit 794237 Includes Piston Rings & Expanders, Packing

More information

Spare parts catalogue 695 U.S.A. DUCATIMONSTER

Spare parts catalogue 695 U.S.A. DUCATIMONSTER Spare parts catalogue 95 U.S.A. DUCATIMONSTER GENERAL INFORMATION The present spare parts order exactly the right spare parts When ordering specify: ) the part's code number followed by its description;

More information

MODELS JG43, JG63, JG83 JG44, JG64, JG84

MODELS JG43, JG63, JG83 JG44, JG64, JG84 MODEL J STYLE G HERMETIC COMPRESSORS RENEWAL PARTS Supersedes: 180.23-RP4 (695) Form 180.23-RP4 (1298) MODELS JG43, JG63, JG83 JG44, JG64, JG84 (See Page 2 for Complete Model Nomenclature) 27531A UNIT

More information

LB361B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools

LB361B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools COMPRESSORS CB-5E-031 2011/06 LB361B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 793099 Top End Repair Kit 793229 Includes Piston Rings & Expanders, Packing

More information

SMF / DSF / DTF SMF / DSF / DTF 200

SMF / DSF / DTF SMF / DSF / DTF 200 2006 SMF / DSF / DTF 200 1 The drawings in this parts book have been scaled so that parts can be easily recognized. 1 CYLINDER ASSY 2 CYLINDER ASSY Ref # Part # Description 1 410 0001A CYLINDER HEAD COVER

More information

Accessories, spare parts and measuring equipment

Accessories, spare parts and measuring equipment Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare

More information

file://c:\programdata\proquestms\partsmanagerpro\print\ ~13~11~5.html

file://c:\programdata\proquestms\partsmanagerpro\print\ ~13~11~5.html C60TLRZ 00 file://c:\programdata\proquestms\partsmanagerpro\print\8-9-0 ~~~5.html Page of 6 8/9/0 C60TLRZ 00 / TOP COWLING 0 Yamaha Motor Corporation, U.S.A. All rights reserved. C60TLRZ 00 file://c:\programdata\proquestms\partsmanagerpro\print\8-9-0

More information

RA 800 Sauber Accessories Brush body. As at: 01/15/10 Time:21:28

RA 800 Sauber Accessories Brush body. As at: 01/15/10 Time:21:28 Accessories Brush body As at: 01/15/10 Time:21:28 Accessories Brush body As at: 01/15/10 Time:21:28 Pos. Description Reference 01 Allen-screw M 8x55 P...489 H 02 U-shim M 8 P...497 T 03 Roller 530.136

More information

Spare parts list Pentruder Modular Drilling System

Spare parts list Pentruder Modular Drilling System Spare parts list Pentruder Modular Drilling System Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M

More information

BEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data

BEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids

More information

Drawing A Crankcase 041 AV SCS

Drawing A Crankcase 041 AV SCS Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 1110 020 2105 1 Crankcase 2-5, 9, 10, 12 2 9371 470 3120 2 Cylindrical pin 6x20 3 9048 216 1010 8 Pan head screw M5x18

More information

TW60 Book No S/N E Cover

TW60 Book No S/N E Cover TW60 Book No. 06564 0.06 S/N E04062 Cover Ref Cover Page 0 TW60 Book No. 06564 0.06 S/N E04062 Index 22 24 23 30 5 27 3 4 6 6 25 3 2 2 26 5 2 7 2 7 5 20 2 Ref main Page 0- main Item Part number Description

More information

Service Parts. Doosan 11.1 L. Engine. Engine Model: Generator Models: 180/200REZX 180/200RZX TP /09

Service Parts. Doosan 11.1 L. Engine. Engine Model: Generator Models: 180/200REZX 180/200RZX TP /09 Service Parts Engine Engine Model: Doosan. L Generator Models: 80/00REZX 80/00RZX TP-0 /09 Table of Contents Introduction... Numbering System Significance... Illustrations... How to Find Part Numbers...

More information

KUBOTA WATER-COOLED DIESEL ENGINE

KUBOTA WATER-COOLED DIESEL ENGINE SPARE PARTS CATALOGUE KUBOTA WATER-COOLED DIESEL ENGINE MODEL: E75N E75NB3 0001 010 14418-0101-0 Crankcase Compl. 1 1 0001 020 14971-2671-0 Plug, Seal 2 2 0001 030 14301-3363-0 Pin Plug 2 2 0001 040 05012-00612

More information

DCS7901. Documents DCS Fuel tank, tubular grip. 2 Hood, air filter, muffler. 3 Cylinder, crankcase. 4 Ignition electronics, starter

DCS7901. Documents DCS Fuel tank, tubular grip. 2 Hood, air filter, muffler. 3 Cylinder, crankcase. 4 Ignition electronics, starter Documents 1 Fuel tank, tubular grip 2 Hood, air filter, muffler 3 Cylinder, crankcase 4 Ignition electronics, starter 5 Oil pump, clutch 6 Chain brake 7 Carburetor 8 Special parts for version with electric

More information

CYLINDER - CYLINDER HEAD

CYLINDER - CYLINDER HEAD A1 CYLINDER - CYLINDER HEAD 1 3FA-11110-00-00 CYLINDER HEAD ASSEMBLY. 1 2 95612-06625-00. BOLT, STUD............. 2 3 22F-11134-10-00. GUIDE, EXHAUST VALVE... 2 4 93440-10109-00. CIRCLIP.................

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase, Cylinder Illustration A Crankcase, Cylinder Ref.Nr. Item code Quantity Description 1 1113 020 2107 1 Crankcase (1,2,4,5,7,8) 2-11 1 1113 020 2108 1 Crankcase (3,6) 2-11 2 1113

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1117 020 2106 1 Crankcase 2-9 2 9022 341 1050 4 Spline screw IS-M5x25 3 0000 988 5211

More information

CYLINDER HEAD. Ref. Part No. Number Description Qty Remarks

CYLINDER HEAD. Ref. Part No. Number Description Qty Remarks A1 A2 A3 A4 CYLINDER HEAD 1 3FA-11110-01-00 CYLINDER HEAD ASSY...... 1 2 90116-06541-00. BOLT, STUD............. 2 3 22F-11134-10-00. GUIDE, EXHAUST VALVE... 2 4 93440-10109-00. CIRCLIP.................

More information

Using a 4mm pin punch ( ) drive Trigger Pin 40 out and remove Trigger Assembly 39.

Using a 4mm pin punch ( ) drive Trigger Pin 40 out and remove Trigger Assembly 39. Servicing the Tool Rotary Valve Dismantling Using a mm pin punch (079000058) drive Trigger Pin 0 out and remove Trigger Assembly 39. Disconnect Hose Assembly 35 and remove Nut 3. Seperate Head Assembly

More information

FA SERIES FORD AUTOMATIC PTO

FA SERIES FORD AUTOMATIC PTO FA SERIES FORD AUTOMATIC PTO PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. FA SERIES PTO EXPLODED 18 Ft.Lb. 5 Ft.Lb. 18-25 Ft.Lb. Gasket Ford Supplied 44 Reuse Gasket Found on Opening or Order

More information

CYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks

CYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks A1 CYLINDER HEAD 1 4JY-11111-00-00 HEAD, CYLINDER 1 (4JY-11111-01-00).......... 1 2 90116-08394-00 BOLT, STUD.............. 5 3 90176-08026-00 NUT, CROWN............. 5 4 90201-08087-00 WASHER, PLATE...........

More information

rev 1_09/20/2017 PS-35C EA3500SR

rev 1_09/20/2017 PS-35C EA3500SR C 1 Tank, Handle 5 7 6 8 17 9 1 2 10 11 12 13 18 19 20 3 21 4 22 23 14 16 2 1 Tank, Handle 1 1 168507-3 TANK CAP COMPLETE 1 1 INC. 2 1 2 213080-9 O RING 29.5 1 1 1 3 163447-0 GASOLINE FILTER 1 1 1 4 195757-7

More information

Straddle carriers spare parts

Straddle carriers spare parts Straddle carriers spare parts Item Description Part No. Quantity Unit Cost USD USD Total AIR FILTER INNER 80709 /P97 8.7 8. AIR FILTER INNER 80709 /P97.7 0. AIR FILTER INNER 80709.9.9 OIL FILTER-LF-(KALMAR)

More information

MPE 750 Turbo Marine - Open Loop

MPE 750 Turbo Marine - Open Loop - This spare parts catalogue is valid for the following engine variants: Document No: 00 ETK Revision: 00_MPE 0 Marine SO.. Date of Issue: 0.0.00 00_ETK_Rev._000 Table of Contents 00 Crankcase 0 Case 0

More information

MPE 750 Turbo Marine - Open Loop

MPE 750 Turbo Marine - Open Loop - This spare parts catalogue is valid for the following engine variants: Document No: 00 ETK Revision: 00_MPE 0 Marine SO.. Date of Issue: 0.0.00 00_ETK_Rev._000 Table of Contents 00 Crankcase 0 Case 0

More information

PARTS MANUAL SUPPORTED BY HUSTLER TURF EQUIPMENT AND EXCEL INDUSTRIES, INC.

PARTS MANUAL SUPPORTED BY HUSTLER TURF EQUIPMENT AND EXCEL INDUSTRIES, INC. SHIBAURA DIESEL ENGINE MODEL: N843 and N843L PARTS MANUAL SUPPORTED BY HUSTLER TURF EQUIPMENT AND EXCEL INDUSTRIES, INC. Table of Contents Chapter 1 General Information....................................

More information

Y08521 September 2014

Y08521 September 2014 Y0852 September 204 Contents How To Use The Illustrated Parts List... 3 FRONT BEARING COVER ASSY.... 4 FRONT CASE ASSY... 5 INPUT SHAFT ASSY... 7 INTERMEDIATE CASE ASSY... 8 LAYSHAFT ASSY.... 0 LRC ASSEMBLY...

More information

Volvo - Product Code 100,1,2, 4, 6, 7, 8, 9, 10 & 112

Volvo - Product Code 100,1,2, 4, 6, 7, 8, 9, 10 & 112 Volvo - Product Code 100,1,2, 4, 6, 7, 8, 9, 10 & 112 Item Description Product_ Code On Hand Qty 20460353 TEMPERATURE SENSOR 100 1 3854260 DISTRIBUTOR 100 1 3854001 COIL 100 1 876839 GASKET KIT 100 1 70326595

More information

Illustrated Parts Catalogue

Illustrated Parts Catalogue Illustrated Parts Catalogue UL35OiHPS AERO ENGINE M020: IPC 350iHPSA0 Revision No : Date: 207-0-9 Please fill in your engine and aircraft details for further reference: Engine Serial No. :... Aircraft

More information

SPARE PART LIST LW 300 E & LW 450 E

SPARE PART LIST LW 300 E & LW 450 E SPARE PART LIST LW 300 E & LW 450 E Nautico Maldives Pvt Ltd H. Oleander Hiththafinivaa Magu Male' Tel: + 960 31 52 53 Fax: + 960 32 44 96 Mobil: 00960 77 23 81 --------00960 77 88 79 E-mail: nautico@dhivehinet.net.mv

More information

Appendix D Outline Dimensions

Appendix D Outline Dimensions Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet

More information

Appliance nomenclature

Appliance nomenclature Appliance unit 075410M 388920 388921 075407M 366544 386162 145897 384584 144688 386368 366405 075442M 075442N 145680 075444M 301476 301474 145886 384605 075443M 384153 366544 388990 367556 075329M 075329N

More information

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B ) Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.

More information

Solenoid Valves Type EVR

Solenoid Valves Type EVR Solenoid Valves Type EVR 16 EVR 2 and 3. Service kit (a.c.) Pos. 16 Armature assembly 1 28 Rubber gasket 1 Compress spring 1 032F0181 1 28 EVR 2 and 3. Seal kit O-ring, Armature tube 1 28 Rubber gasket

More information

Specifications & Parts Model 2.0/15 Crane

Specifications & Parts Model 2.0/15 Crane 2.0/15T: 99904797: 20111213 PARTS-1 Specifications & Parts Model 2.0/15 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 TECHNICAL SUPPORT FAX: 641-923-2424 MANUAL PART NUMBER:

More information

Valve Station in stainless steel ICF SS 20 and ICF SS 25

Valve Station in stainless steel ICF SS 20 and ICF SS 25 Data sheet Valve Station in stainless steel ICF SS 20 and ICF SS 25 Based on advanced technology the ICF SS valve station incorporates several functions in one housing, which can replace a series of conventional

More information

parts list and service manual

parts list and service manual CS0 & CS Series clutch shift pto parts list and service manual U.S. Pat.,2,0 for the allison world transmission CS0 & CS Series Clutch shift PTO Exploded View parts list and description item qty part number

More information

Remanufactured Transmissions, Spare Parts, and Kits Catalog

Remanufactured Transmissions, Spare Parts, and Kits Catalog S5-47M Spare Parts Gearbox Housing Group 01.010 1317 301 016 Main Housing All 01.018 0501 202 797 Breather All 01.026 1319 301 012 Oil Feeder All 01.030 1317 301 017 Rear Housing 4x2 014/016/020 1317 301

More information

Spare parts catalogue SPORT 1000 SPORTCLASSIC

Spare parts catalogue SPORT 1000 SPORTCLASSIC Spare parts catalogue SPORT 000 SPORTCLASSIC SPORT 000 M.Y. '07 Spare Parts Department P.N. 95252C Ottobre - October '06 Edizione - Edition 00 SPORT 000 M.Y. '07 Spare Parts Department P.N. 95252C Ottobre

More information

CYLINDER. Ref. Part No. Number Description Qty Remarks

CYLINDER. Ref. Part No. Number Description Qty Remarks A1 CYLINDER 1 2GU-11111-00-00 HEAD, CYLINDER 1......... 1 2 NGK-B8ES0-00-00 NGK B8ES 10PK........... 2 3 90116-08394-00 BOLT, STUD.............. 8 4 95912-08640-00 BOLT, STUD.............. 2 5 90179-08491-00

More information

KORO - FRESH BREW VOLT - 60 HZ

KORO - FRESH BREW VOLT - 60 HZ SPARE PARTS CATALOGUE KORO - FRESH BREW - 120 VOLT - 60 HZ DOC. N. : C265X00 1 - Door Page: 2 1 - Door 1 251877 DOOR 2 252480 FB LOGOTYPE-PRODUCT LABEL-USA- 3 252137 DOOR LOCK 4 251785 KEYBOARD REFERENCE

More information

Drawing A Crankcase. Drawing A Crankcase

Drawing A Crankcase. Drawing A Crankcase Drawing A Crankcase Drawing A Crankcase 1 4238 020 2901 1 Crankcase 2-4 2 9503 003 0351 2 Grooved ball bearing 15x36.3x11 3 0000 953 6606 3 Stud 4 9630 951 1696 1 Oil seal 15x26x7 5 4238 020 2605 1 Crankcase,

More information

Engine [P-TB216EBA] 3TNV74F-SPTB

Engine [P-TB216EBA] 3TNV74F-SPTB Ref. 0-1 Page 0-1 How to read this Parts Catalog Part No. ENGINE 3TNV74F-SPTB 2013.7.15 P-TB216EBA Ref. 0-1 Page 0-1 Ref. 0-2 Page 0-2 CYLINDER BLOCK 26 27 5 4 12 6 4 10 4 13 11 1 23 34 23 34 7 7 7 7 28

More information

SPARE PARTS LIST CP COMPRESSOR. Model CPC CPC 50

SPARE PARTS LIST CP COMPRESSOR. Model CPC CPC 50 SPARE PARTS LIST EN CP COMPRESSOR Model CPC 0-50 - 60 6 305 503 65 CPC 50 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? 3 MAINTENANCE KITS -5 STANDARD UNITS MOTOR-COMPRESSOR UNIT 6-7

More information

CYLINDER HEAD - CYLINDER

CYLINDER HEAD - CYLINDER A1 CYLINDER HEAD - CYLINDER 1 8AY-11111-00-00 HEAD, CYLINDER 1......... 1 2 8A7-12499-00-00 JOINT................... 1 3 NGK-BR9ES-00-00 PLUG, SPARK............. 2 4 8AY-11181-00-00 GASKET, CYLINDER HEAD

More information

Damper Seal Kit Seal Kit Strainer Seal kit Seal Kit Element

Damper Seal Kit Seal Kit Strainer Seal kit Seal Kit Element www.westxl.com Sandvik Parts Part No. Description Qty Available 00290840 Gasket 3 00298830 Gasket 5 00641800 Plug pito jaw 2 00668970 Spacer 4 00668980 Shim 2 00669000 Shim 2 00670210 Handle 1 00670370

More information

DIAMOND CONCRETE SAW PARTS LIST MODEL CC8000 P R O D U C T S. (Revised )

DIAMOND CONCRETE SAW PARTS LIST MODEL CC8000 P R O D U C T S. (Revised ) DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC8000 (Revised 10-15-2002) Table of Contents Page Saw Controls Legend. 3 Drawing 1. Frame Group. 4-5 Drawing 2. Arm Assembly... 6-7 Drawing 3. Hydraulics

More information

KORINTO FRESH-BREW USA - UL VOLT - 60 HZ

KORINTO FRESH-BREW USA - UL VOLT - 60 HZ SPARE PARTS CATALOGUE KORINTO FRESH-BREW USA - UL - 120 VOLT - 60 HZ DOC. N. : C275X00 1 - Door Page: 2 1 - Door 1 252463 DOOR 2 252455 LOGO PLATE 3 251783 DOOR GLASS 4 251784 DOOR COVERING 5 252137 DOOR

More information

Mobile column lift ST List of parts and appendices Stertil B.V A

Mobile column lift ST List of parts and appendices Stertil B.V A Mobile column lift ST 1175 List of parts and appendices 2006 Stertil B.V. 32808020-A List of parts and appendices for the 17,5 ton Stertil-Koni mobile column lift ST 1175 Starting at Serial Number: TJ

More information

Compressor - Install (E.40.C.31 - F.10.A.15)

Compressor - Install (E.40.C.31 - F.10.A.15) Compressor - Install (E.40.C.31 - F.10.A.15) 1. Set the compressor on its mount and secure into place using the four bolts. Connect the refrigerant suction line (5) and the discharge line (4). Install

More information

Model No. EK8100 POWER CUTTER

Model No. EK8100 POWER CUTTER 1 / 7 2 / 7 3 / 7 4 / 7 5 / 7 6 / 7 7 / 7 1 / 5 Item Parts No. Description I/C Qty N/O Opt. 1 Opt. 2 Note 001 168507-3 TANK CAP COMPLETE 1 D10 INC. 2 002 213080-9 O RING 29.5 1 003 163499-1 SUCTION HEAD

More information

rev 2_ EA6100P53G (Makita Teal) EA6100PR (Makita Red) PS-6100 (Dolmar Red) PS-6100H (Dolmar Red)

rev 2_ EA6100P53G (Makita Teal) EA6100PR (Makita Red) PS-6100 (Dolmar Red) PS-6100H (Dolmar Red) (Makita Teal) (Makita Red) (Dolmar Red) (Dolmar Red) 1 Tank, Handle USA 168 24 12 125 22 20 100 108 23 11 25 127 A 88 123 21 58 130 67 9 3 4 65 67 118 66 61 118 100 26 59 60 167 109 109 2 1 Tank, Handle

More information

Standard Accessories for HA

Standard Accessories for HA MODEL HA06-322 HA06-322 É 26.5 200 324. Specifications Model HA06-322 38 Max. Throat Depth Punching Capacity (for Mild Steel) Diameter Thickness 2-3/8" (60) 7/8" (22) /2" (3) 76 2 50.5 83 30 4.5 24 60.

More information

PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX

PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly

More information

Centrifugal Chiller PFH087 PL

Centrifugal Chiller PFH087 PL Centrifugal Chiller PFH087 PL-1003-17 Nomenclature 1 Unit Assy. Components Labels 2 Unit Assy. Components Labels No. Index Parts No. Parts Name Drwg. No. Parts Model & Specifi cation Q ty/unit PFH087 Wiring

More information

HYDRAULIC ROCK DRILL HL 800T

HYDRAULIC ROCK DRILL HL 800T HYDRAULIC ROCK DRILL HL 800T Drifter Parts TAMROCK 550 260 13 HYDRAULIC ROCK DRILL HL 800T STABILIZER, AIR FLUSHING, SHANK Ø 52, HYDRAULIC MOTOR OMT 315 2 550 260 12 HOUSING ASSY 1 SEP. PART LIST 5 550

More information

Spare parts catalogue 400

Spare parts catalogue 400 Spare parts catalogue 00 DUCATIMONSTER MOTOR HOLDING MONSTER 00 M.Y. '0 Spare Parts Department P. 95022F Ottobre - October '0 Edizione - Edition 0 DUCATIMOTOR HOLDING MONSTER 00 M.Y. '0 Spare Parts Department

More information

Parts list. See Frame parts list Page 12. See hydraulic pump. exploded view. Page 14. See work head. exploded view. Page 7

Parts list. See Frame parts list Page 12. See hydraulic pump. exploded view. Page 14. See work head. exploded view. Page 7 Parts list See Frame parts list Page 12 See hydraulic pump exploded view Page 14 See work head exploded view Page 7 See electrical parts list Page 18 See hoist parts list Page 11 See Frame parts list Page

More information

Engine Dismantle and Assemble ( )

Engine Dismantle and Assemble ( ) Engine Dismantle and Assemble ( 34 8) Special Tools 5 053 Slide hammer 47 Vibration damper remover 47 5053 00 Splined head socket, cylinder head bolts 87 Mounting stand with geared drive 00 059C Installer

More information

RWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data

RWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.

More information

Hydraulic Rotary Hammer Drill

Hydraulic Rotary Hammer Drill M a s c h i n e n f a b r i k G m b H Hydraulic Rotary Hammer Drill Type 2 2406 0010 Techn. Doc. No. 262 Illustration can differ from the original Repair Manual and Spare Parts List 224060010_Inst_en_Version_06.doc

More information

Spearhead Excel 565, 605 & 645T

Spearhead Excel 565, 605 & 645T 1 Spearhead Twiga 5000, 6000, 6000LR & 6000 T Parts Book 11 th Edition February 2010 Green-Tec A/S Merkurvej 25 DK 6000 Kolding Tel: +45 7555 3644 Fax: +45 7555 4243 www.greentec.eu info@greentec.eu Spearhead

More information

Appendix D Outline Dimensions

Appendix D Outline Dimensions Appendix D Outline Dimensions Models 91 691 and F91 F691 Bare with Flywheel L L1 M M1 M M1 L L1 Outline Dimensions Inches (Centimeters) Model A B C D E F G H J K 91, F91 1-13/16 2-3/8 3-11/16 13/32 5/8

More information

Rexroth. Spare parts list. Bosch Group. Part No.: R Designation: A4VG28HW1/30R-PZC10N001E-S

Rexroth. Spare parts list. Bosch Group. Part No.: R Designation: A4VG28HW1/30R-PZC10N001E-S : R909442713 : A4VG28HW1/30R-PZC10N001E-S *G* R909709194 1 R909434314 ROTARY GROUP L 2 R909600897 CONTROL, HYDRAULIC L 3 R909428735 PORT PLATE WITH VALVES L 6 R909600949 CONTROL MODULE L 8 R909426341 HOUSING

More information

QOF-2/3/5/7.5. Parts Manual. Direct Drive Oil-free scroll compressors. Manual No November 2014 Edition

QOF-2/3/5/7.5. Parts Manual. Direct Drive Oil-free scroll compressors. Manual No November 2014 Edition QOF-2/3/5/7.5 Direct Drive Oil-free scroll compressors Parts Manual This manual contains important safety information and should be made available to all personnel who operate and/or maintain this product.

More information

Volkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 13 Engine-Crankshaft, Cylinder block (Page GR-13)

Volkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 13 Engine-Crankshaft, Cylinder block (Page GR-13) 13 Engine-Crankshaft, Cylinder block (Page GR-13) Engine, disassembly and assembly 10-222 A/21 guide from 10-222 A support tool, modifying Ribbed belt, removing and installing Semi-automatic toothed belt

More information

GN-FYS-76-SC SCREW WHEEL GN-FYS-76-9

GN-FYS-76-SC SCREW WHEEL GN-FYS-76-9 GN-FYS-76-1 RUBBER FOOT GN-FYS-76-2 LEG GN-FYS-76-3 FLAT WASHER GN-FYS-76-4 HEX NUT GN-FYS-76-5 LOCK WASHER GN-FYS-76-6 HEX BOLT GN-FYS-76-7 DISCHARGE CHUTE GN-FYS-76-8 MOVABLE DOOR GN-FYS-76-9 TUBE GN-FYS-76-10

More information

ConstructionParts.com

ConstructionParts.com Main assy, engine plate and lower part 18213-2 6 Main assy, engine plate and lower part Item Part No Rem Qty Description 1 D391218-01 1 Engine plate 2 Handle ( Page 60 ) 3 Ground plate and eccentric element

More information

SINGLE ACTING TRIPLEX PUMP MODEL

SINGLE ACTING TRIPLEX PUMP MODEL GARDNER DENVER 15-517 4 th Edition APRIL, 2007 SINGLE ACTING TRIPLEX PUMP MODEL PZL 11 STROKE PARTS LIST MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH GENUINE GARDNER DENVER PARTS AND SUPPORT SERVICES

More information

F1 CRANKCASE ASSY. NOTES: V5 Engine Model:172MM D# PART# DESCRIPTION Q'TY 1 172MM-A RIGHT CRANKCASE COMP. 1

F1 CRANKCASE ASSY. NOTES: V5 Engine Model:172MM D# PART# DESCRIPTION Q'TY 1 172MM-A RIGHT CRANKCASE COMP. 1 NOTES: V5 Engine Model:172MM F1 CRANKCASE ASSY. 1 172MM-A-011200 RIGHT CRANKCASE COMP. 1 2 152MI-011010 OUTER BUSH, ENGINE SUSPENSION 2 3 152MI-011008 O-RING, 15.8 2.4 4 4 152MI-011009 INNER BUSH, ENGINE

More information