SHOP AIR SUPPLY. All Carr Lane toggle clamps are DFARS and RoHS compliant.
|
|
- Silvester Egbert Carter
- 5 years ago
- Views:
Transcription
1 FILTER/REGULATOR/LUBRICATOR - CLR-100-FRL SHOP AIR SUPPLY 4-WAY AIR VALVE CL-14-PCAV (2) SILENCERS CL-14-PCEM CHECK VALVE - CLR-224-ACV All Carr Lane toggle clamps are DFARS and RoHS compliant. 200 lbs 500 lbs 1000 lbs 5000 lbs Toggle Hold-Down Clamps pp Similar to a vertical-handle hold-down clamp, except linkage is operated by a double-acting air cylinder instead of by hand. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. 850 lbs Toggle Push Clamps pp Similar to a manual plunger clamp, except linkage is operated by a doubleacting air cylinder instead of by hand. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. 14 lbs 25 lbs 66 lbs 165 lbs 277 lbs Swing Clamps pp Hold-down clamp with a clamping arm that rotates 90 for clear loading. Sturdy helical-cam mechanism first rotates arm, then clamps down. Double acting. (Not shown in this catalog section... pp ) Clamping Check Exhaust Air Seal Valves Valves Mufflers Fittings Replacement Kits Air Accessories p. 501 Complete selection of accessories including clamping valves, check valves, exhaust mufflers, air fittings, and seal replacement kits.
2 AIR SUPPLY FROM ABOVE AIR SUPPLY FROM BELOW CL-400-PTC Super-compact hold-down clamp for applications where space is at a premium. Open arm allows spindle adjustment. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. Arm opens /4 -bore double-acting air cylinder with #10-32 ports (see page 501 to order fittings). Supplied with #10-32 flat-cushion spindle CL FC and (2) CL-3166-TW flanged washers. 100-psi maximum input air pressure. Shipping weight 0.8 lbs. An optional bracket for side mounting is also available (CL-400-PCBR). Clamping force at 100 psi, at center of arm: 15/16 7/32 (4) HOLES 11/64 FOR #8 OR M4 SCREWS (2) #10-32 PORTS 11/16 3/16 29/32 5/16 (4) HOLES 11/64 FOR #8 OR M4 SCREWS 23/32 3/32 #10-32 FLAT CUSHION SPINDLE 3/8 7/ / /4 15/16 7/8 1-7/8 1-11/ /32 OPTIONAL MOUNTING BRACKET CL-400-PCBR (ORDER SEPARATELY)
3 200 lbs CL-500-PTC Small-yet-powerful hold-down clamp with a long open arm. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. Arm opens /4 -bore double-acting air cylinder with 1/8-NPT ports. Accepts any 1/4-20 short spindle and (2) CL-148-TW flanged washers... see pages to order. 100-psi maximum input air pressure. Shipping weight 2.5 lbs. 200 lbs Clamping force at 100 psi, at center of arm: 200 lbs
4 Open Arm Solid Arm 500 lbs CL-1000-PTC CL-1001-PTC Open Arm Solid Arm Popular medium-size hold-down clamp available with a solid arm, or an open arm for spindle adjustment. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. Arm opens /4 -bore double-acting air cylinder with 1/8-NPT ports. Accepts any 5/16-18 short spindle and (2) CL TW flanged washers... see pages to order. Solid-arm version accepts a CL BR bolt retainer. 100-psi maximum input air pressure. Shipping weight 3.0 lbs. 500 lbs Clamping force at 100 psi, at center of arm: 390 lbs 21/64 3-3/8 9/32 (4) HOLES 9/32 FOR 1/4" OR M6 SCREWS 1/8 1-1/4 1-5/16 1/8 7/16 3/4 1/8" NPT PORTS 1-3/4 1-3/8 2-1/16 1-3/16 3-1/ /32 1-5/ /8 10-1/4 2-1/4 2-25/32
5 Open Arm Solid Arm CL-2000-PTC CL-2001-PTC 1000 lbs Open Arm Solid Arm Extra-large hold-down clamp available with a solid arm, or an open arm for spindle adjustment. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. Arm opens /4 - bore double-acting air cylinder with 1/4-NPT ports. Accepts any 1/2-13 spindle and (2) CL-1213-TW flanged washers... see pages to order. Solid-arm version accepts a CL BR bolt retainer. 100 psi maximum input air pressure. Shipping weight 6.0 lbs lbs Clamping force at 100 psi, at center of arm 680 lbs
6 5000 lbs CL-3000-PTC Heavy-duty hold-down clamp with a solid forged steel clamping arm. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. Arm opens /2 -bore double-acting air cylinder with 1/4-NPT ports. 150-psi maximum input air pressure. Shipping weight 15.0 lbs lbs Clamping force at 100 psi, at center of arm: 1600 lbs
7 AIR SUPPLY FROM ABOVE AIR SUPPLY FROM BELOW CL-600-PPC Super-compact plunger clamp. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. 7/16 plunger travel. 3/4 -bore double-acting air cylinder with #10-32 ports (see page 501 to order fittings). Supplied with #8-32 nylon hexhead spindle CL SA. 100-psi maximum input air pressure. Shipping weight 0.8 lbs. An optional bracket for side mounting is also available (CL-400-PCBR). Clamping force at 100 psi: 1-5/16 1/4 1-1/4 3/8 (3) HOLES 11/64 FOR #8 OR M4 SCREWS 29/32 15/32 1/ THREAD 1/2 DEEP 7/16 15/16 5/16 23/32 1-1/4 (3) HOLES 11/64 FOR #8 OR M4 SCREWS OPTIONAL MOUNTING BRACKET CL-400-PCBR (ORDER SEPARATELY) 5/16 7/16 TRAVEL 1-7/ /32 3-3/8 4-15/16 #10-32 PORTS 15/ / / /16
8 850 lbs CL-1500-PPC Larger-size plunger clamp. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. 1 plunger travel. 1-1/4 -bore double-acting air cylinder with 1/8-NPT ports. Accepts any 3/8-16 spindle... see pages to order. 100-psi maximum input air pressure. Shipping weight 3.2 lbs. 850 lbs Clamping force at 100 psi: 430 lbs 29/ /16 (4) HOLES 11/32 FOR 5/16 OR M8 SCREWS 1/ /16 5/16 1-1/8 NPT PORTS 1 TRAVEL 3/8-16 THREAD 1-1/8 DEEP 3-3/32 1-3/4 2-3/16 1-3/ /2 5-1/16 5-3/8 11-9/16 1-3/ /8
Maximum Motor Power 0.25 hp 0.19 kw Torque Range ft. lbs Nm. Torque Range ft. lbs Nm Non-Reversible
21MF-900/910 Series 21MR-910 Series 0.3 hp 0.22 kw 0.25 hp 0.19 kw 0.24 11.3 ft. lbs. 0.3 15.3 Nm 1.2 10.0 ft. lbs. 1.6 13.6 Nm Threaded or Keyed Spindle 21MF-900 21MR-911 Code 0, 1, 2 & 3 5.69 Code 4
More informationContinuous Run Vent Unloaders
Continuous Run Vent Unloaders Mark 2 Load Genie The LGM 20 - Mark II is a self-contained unloading valve, which can be used wherever a continuous run compressor is required. The compressor may need to
More informationFigure 1. Locating Vibrators and Reinforcing Beams on Hoppers. Table I. Reinforcement Channel Selection CAUTION
Vibrolator Ball Vibrator Installation Instructions! DANGER Before installing equipment, turn off and lock out/tag out all energy sources to the hopper, conveyor, and/or conveyor accessories according to
More informationStraight Line Action Clamps
Straight Line Action Clamps Sizing and Application Chart Click Page # View N [lbf.] mm [inch] Series Page MC-SLA-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 5000
More information9000 LB Rolling Air Jack Installation, Operation and Repair Parts Information NOTICE - AIR SUPPLY MUST HAVE IN-LINE FILTER/REGULATOR/LUBRICATOR (NOT INCLUDED) TO VALIDATE THE ROLLING AIR JACK WARRANTY
More informationFisher D4 Control Valve Assembly
Product Bulletin D103039X012 Fisher D4 Control Valve Assembly D4 Valve The Fisher D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve
More informationTechnical Appendix. Manual Clamping Technology
19.1 Technical Appendix Manual Clamping Technology Selecting The Proper DE-STA-CO Clamp The information contained in this catalog is designed to help you select the right damp to accomplish your job. DE-STA-CO
More informationPNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel
PNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel construction and have compact cylinders without tie-rods.
More informationProduct Code Beginning L3073 E 02/2014 J. Repair Parts List, Fig. 1 L3073
Repair Parts Sheet Revision Revision Date Repair Parts Sheet ULTIMA Series Hand Pump Models P-80 and P-801 Product Code Beginning E 02/2014 J Fig. 1, Beam, Handle and Labels 317 305 319 318 309 316 303
More informationProduct Code Beginning L3073 F 06/2015 J. Repair Parts List, Fig. 1 L3073
Repair Parts Sheet Revision Revision Date Repair Parts Sheet ULTIMA Series Hand Pump Models P-80 and P-801 Product Code Beginning F 06/2015 J Fig. 1, Beam, Handle and Labels 317 305 319 318 309 316 303
More informationPower Workholding. Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling
Power Workholding Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling OUR STORY In 1982 an independent joint venture was established to marry the proven product expertise
More informationDesign D4 Control Valve
Product Bulletin Design D4 Control Valve D4 Valve The Design D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve is ideal for use
More informationFor material handling and clamping of small workpieces
For material handling and clamping of small workpieces Power Clamp Cylinder New ø25, ø32 Compact Type INFORMATION 34 mm Lightweight Compact High clamping force Lock function 53 mm Lightweight Weight :
More informationCompressed Air Systems Catalog
Compressed Air Systems Catalog Reciprocating Rotary Screw Aftermarket/Parts 2 Advantage Series The Advantage Series air compressor units come with all the normally ordered accessories already mounted and
More informationMK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
More informationTuck San s Reefer Workshop. Featuring
Tuck San s Reefer Workshop Featuring I cannot recall the particulars of this case as it occurred over 1 year ago already. Definitely salt water entering gang box either through bad or missing gasket
More informationModels Affected: Certain 2013 Model Year Propane Vision Buses Equipped with Ford 6.8L Engines CORRECTIVE ACTION ---- PROCEDURE
Models Affected: Certain 2013 Model Year Propane Vision Buses Equipped with Ford 6.8L Engines ISSUE Certain 2013 model year propane Vision buses equipped with Ford 6.8L engines may not have the service
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationClippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
More informationARS3LS-M110 Pneumatic Nutrunner
ARSLS-M0 Pneumatic Nutrunner Nov. 0 Model No. ARSLS-M0 Table of Contents Table of Contents......... Tool Assembly......... Reversible Motor Group....... - Valve Stem Assembly Group........ First Stage
More informationQUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered
More informationP773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
More informationQuarter turn actuators DFPD
Quarter turn actuators DFPD Quarter turn actuators DFPD Key features Function The DFPD series features a rack and pinion combination with a constant torque characteristic across the entire swivel range.
More informationAUTOMATED INDUSTRIAL MACHINE, INC TOGGLE-AIRE DIVISION
The Pneumatic Toggle Press Innovators. Since 1947. AUTOMATED INDUSTRIAL MACHINE, INC TOGGLE-AIRE DIVISION Installation, Operation and Maintenance 3 Ton, 1030 Series Bench Presses IMPORTANT It is the responsibility
More information1999 F-Super Duty Workshop Manual
Page 1 of 5 SECTION 307-01: Automatic Transaxle/Transmission 1999 F-Super Duty 250-550 Workshop Manual DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES Procedure revision date: 01/26/2000 Main Control Valve Body
More informationSERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
More informationMagnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
More informationACTUATORS GENERAL CATALOG
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS PISTON TYPE SERIES CONTENTS Features 1223 Specifications 1224 Inner Construction, Major Parts and Materials 1226 Order
More informationFisher D4 Control Valve Assembly
D4 Valve Product Bulletin Fisher D4 Control Valve Assembly The Fisher D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications using either pneumatic
More informationAir Preparation Products. For Low Temperature Service. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Air Preparation Products For Low Temperature Service Catalog -E Miniature R Series R Regulators Miniature Miniature Regulators /8", /" Basic /8" Body R-C Non- R-MC Features Diaphragm operated for fast
More informationBulb Number Part Number Description Clamp Block Insert
Bulb Number Part Number Description 1 11040-301 Clamp Block Insert 4 11050-400 COUNTERWEIGHT (3.87) 11 12000-398 SPACER 13 12050-200 MAIN FRAME 17 12050-210 CAM 18 12050-211 STOP BRACKET 32 12090-322 FOOT
More informationHIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS
HIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS Since 2001, PowerX International, LLC has been collaborating with its customers to design and supply hydraulic products and systems. Specializing in mobile
More informationTHE REVOLUTIONARY STINGER
THE REVOLUTIONARY STINGER 2.0 There is no product like the revolutionary Stinger 2.0 from Elkhart Brass! This firefighter-friendly monitor is super lightweight for easy carrying and handling. It combines
More informationLiquid Strainers. Protect nozzles, valves and pumps from damaging debris. Experts in Spray Technology Spray Nozzles. Spray Fabrication.
Experts in Technology Nozzles Control Analysis Fabrication Liquid Strainers Protect nozzles, valves and pumps from damaging debris. Table of Contents T Strainers Low to Medium Pressure TW...3 TWC...3 TWF...4
More informationThe Right Tool for Your Tough Job
SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications
More informationAPT PAVING BREAKERS TOOL MAINTENANCE & REPAIR INFORMATION REMEMBER: PREVENTIVE MAINTENANCE WILL ASSURE MAXIMUM PERFORMANCE FROM ALL OF YOUR APT TOOLS.
PAVING BREAKERS AMERICAN PNEUMATIC TOOL TOOL MAINTENANCE & REPAIR INFORMATION Check BEFORE, DURING AND AFTER use of tools. FIELD OPERATION: Before: 1. Fill the oil reservoir with Air Tool oil or 10W equivalent.
More informationThe following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves.
VALVE ACTUATORS The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves. One of the most versatile items in the Clippard line. Permits wide circuit
More informationLifting Gear Hire Jacking
Lifting Gear Hire Jacking All rental equipment is available throughout North America. For specific product information, refer to the group of equipment within this section s overview on the following page
More information.401 SHANK AIR HAMMERS
AIR HAMMERS 507 AIR TOOLS AIR HAMMERS.401 SHANK AIR HAMMERS.401 Shank Medium Barrel Air Hammer 404123 / AH150M Medium barrel delivers steady powerful blows Accepts popular.401 taper shank chisels Standard
More informationU.S. INDUSTRIAL TOOL INSTALLATION AND SERVICE PARTS LISTING PORTABLE OFFSET HANDLE PNEUMATIC TOOLS SERIES US7387
U.S. INDUSTRIAL TOOL INSTALLATION AND SERVICE PARTS LISTING PORTABLE OFFSET HANDLE PNEUMATIC TOOLS SERIES US7387 MOTOR HOUSING MOTOR GEAR CASE CHUCK ASSEMBLY NO. MODEL NO. ASSEMBLY NO. ASSEMBLY NO. ASSEMBLY
More informationShape of Chisel Bush. WG- Round FC-1Z-2~4Z-2 WH- Hex FC-1Z-1~4Z-1. ø14 WG- ø14 WH- Shank mm WJ-8SL 200. Round FC-01SA WJB-8F 200 FC FC-01
Accessories CHISELS FOR FC-SERIES CHISELS / MODELS REFERENCE Sign Shape of Chisel Bush WJ- FC-01-4 WJB- FC-01-3 Sign Shape of Chisel Bush WG- FC-1Z-2~ WH- FC-1Z-1~ Sign P F SL Chisel End Shape Point Flat
More information1/2 Air Impact Wrench P/N IR 2235TiMAX-2 With 2 Anvil, Weighs Only 4.9 lbs ft.-lbs. torque. 3/4 Super Duty P/N IR 261
37 Order NLINE www.midwestwheel.com CATALOG NUMBER Ingersoll Rand Air Tools & Accessories 3/8 Air Impactool IR 2115TiMAX The best power-to-weight ratio in its class 300 ft.-lbs. torque Enhanced power settings
More informationMTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber
More informationTRENCH & CLAY DIGGERS
TRENCH & CLAY DIGGERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1047 Rev A CLAY AND TRENCH DIGGERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir
More informationEdition 4 October Air Screwdrivers. Series QS Inline Push-to-Start Screwdriver. Parts Information. Save These Instructions
16574493 Edition 4 October 2013 Air Screwdrivers Series QS Inline Push-to-Start Screwdriver Parts Information Save These Instructions QS Inline Push-To-Start Motor and Gearing - Exploded View 28 27 26
More informationCompressed Air Systems Catalog
Compressed Air Systems Catalog Reciprocating Rotary Screw Aftermarket/Parts 2 Advantage Series Stationary The Advantage Series air compressor units come with all the normally ordered accessories already
More informationAir Powered Double Diaphragm Pumps
Air Powered Double Diaphragm Pumps Notes. TC-X 030 Series Standard Diaphragm Pumps with 1/4" Connections Liquid Flow Rate: Maximum Air Inlet Pressure: Wetted Body Material Options; 1 to 8 L/min. (2.14
More informationTOGGLE CLAMPS AND LATCHES. See the New Secure-Lock Latch Clamps, pgs Distributed by: QUALITY DIVERSITY ECONOMY
TOGGLE CLAMPS AND LATCHES See the New SecureLock Latch Clamps, pgs. 2834 Distributed by: www.goodhandinc.com QUALITY DIVERSITY ECONOMY DRIVEN BY CUSTOMER DEMAND For over 45 years, we ve served our valued,
More informationDistributed By Aetna Plastics Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General Size: ½ 2 Material: PVC, CP
Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM,
More informationSeries W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
More informationCombination Clutch/Brake
WE9289 P1100WC PCB Catalog v4_new_p-1100-wc.qxd 1/31/12 10:51 AM Page 10 For metalforming equipment Fast, smooth cycling Cool running with higher torque Compact disc design Simple Installation Multiple
More informationTPCA Power Clamps Catalog
TPCA Power Clamps Catalog Pneumatically Operated, Weld-Contamination Sealed, Heavy Duty Power Clamps > Degree of arm opening can be adjusted from -12 > One clamp for both dual or single arms > Uses TRILOK
More informationGE Marine. Seaworthy power. GE s new L250 inline diesel engine. imagination at work
GE Marine Seaworthy power GE s new L250 inline diesel engine imagination at work GE s L250 Built by one of the world s largest manufacturers of medium-speed diesel engines Designed to save fuel and meet
More informationCOMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog Ingersoll HOME TRACTORS ATTACHMENTS INDEX ENGINES GENERAL INFO. casecoltingersoll.
R Ingersoll COMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog 8-3370 HOME TRACTORS ATTACHMENTS PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (PIN) AND SERIAL NUMBERS (S/N) TRACTOR MODEL AND
More informationP753-2 For Models: M753W2 and NL753W2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P753-2 For Models: M753W2 and NL753W2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are
More informationInstallation Instructions Dual Perimeter Plate Nitrous System (#82185)
Installation Instructions Dual Perimeter Plate Nitrous System (#82185) Thank you for choosing ZEX. If at any time you have questions regarding this or any of our products, please call our ZEXTEK support
More informationSevere Service 40MM & 50MM SEVERE SERVICE GAUGE
Severe Service 40MM & 50MM SEVERE SERVICE GAUGE Copper Alloy Internals Glycerine Filled Center Back Mount Only Marsh Instruments Liquid-Filled Gauges are designed to perform in rugged and harsh environmental
More informationModel 6. Power Wheel. Planetary Gear Drive
Model 6 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 6 Wheel Drives - Single & Double Reduction 4-5 Model 6 Wheel Drives w/a2 Series Integral Parking Brake - Single & Double Reduction
More informationStainless Steel Air-Vane Motors
Screwdriving technology Automation Air motors Air tools Stainless Steel Air-Vane Motors up to 1.2 kw / 1.6 Hp corrosion free oilfree sealed The DEPRAG line of air motors merges an attractive cost to power
More informationUniGrip Vertical Toggles
UniGrip Toggles Over 00 Clamp Variations Available Standard Series Standard s UCC-300101 Series Toggle Clamps Extra Hold Supplied with UCC-008 Neoprene-tipped Spindle and washers Will free up space on
More informationFULL COLOR TAB #11 IT AB121
FULL COLOR TAB #11 IT AB121 208 AB121 Air SERIES: AUTO RECIPROCATING AIR BOOSTER Model Numbers: AB121 & AB221 This 2:1 ratio air-to-air booster is compact and self-contained. Unit incorporates integral
More informationBRUTE II 4-VALVE Manifold
gauges Leak Detectors Detectors 20 BRUTE II 4-VALVE Manifold The Brute II 4-Valve Test Charging Manifold provides the flow that s proven faster than any conventional manifold. The aluminum alloy is forged
More informationCompact Ball Valves. Copyright 2018 Advanced Valve Solutions / Cortec
Compact Ball Valves Ball Valves are one of the most commonly used valve types, and can be found in use in a wide variety of industries. A simple 90º operation and the possibility to have uninterrupted
More informationBehringer Ball Valve Ordering Code
Ball Valve Catalog Behringer Ball Valve Ordering Code 1 Behringer 2-Way Ball Valves Block Body Valves with Threaded Connections Size Range: 1/4-1 Steel Material Delrin Ball Seats (Others available on request)
More informationCLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com SERIES 8P0O80/82/135/136 SERIES 8P0129/131(T,L) 80: Direct mount
More informationQuarter turn actuators DFPD
Quarter turn actuators DFPD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationBLOWER PARTS & ACCESSORIES
BRACKET KITS NEW! BOLT ON BEARING BRACKET Replacement Bearing Brackets for Lau Belt Drive Blower (see Page 22). 9 Blower 054866-01 10 Blower 054867-01 11 Blower 054868-01 12 Blower 054869-01 SERVICE TIP:
More informationSeries 77. Miniature 3/2 Valves PUSH BUTTON TOGGLE LEVER SPRING RETURN WITH DETENT ONE WAY ROLLER ROLLER AIR PILOT FINGER BUTTON BALL PLUNGER
Miniature 3/2 Valves TOGGLE LEVER 77.1130 1/8 77.1131 1/8 ROLLER ONE WAY ROLLER - N/O or N/C application - Aluminum alloy 125 PSI -10 C to 60 C (14 F to 140 F) 77.1132 1/8 77.1133 1/8 BALL PLUNGER AIR
More informationPOWER TAKE OFF S 1000/2000 SERIES 1200 SERIES 1000 SERIES 3100/3150/3250 SERIES 3250 SERIES 2000 SERIES 3000 SERIES 3100 SERIES
talogo_usa_maquetación 1 31/01/2014 14:14 Página 1 atalogo_usa_maquetación 1 31/01/2014 14:14 Página 2 POWER TAKE OFF S 1000/2000 SERIES 1200 SERIES Our 1000 and 2000 series PTO s have been engineered
More informationFlange Facing. A Buyers Guide.
Flange Facing A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising uptime
More informationP843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its
More informationInstrument Panel Steering Column Mounting Bracket Welds to top of steering column to mount instrument panel and switch box brackets.
LOWE Industries PO Box 180 Rosewood, Qld 4340 www.kenlowe.com.au Phone 0411-699 535 Instrument Panel Steering Column Mounting Bracket Welds to top of steering column to mount instrument panel and switch
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationBackhoe Range. For Tractors from 15HP
Backhoe Range For Tractors from 15HP LEWIS Backhoe Range The LEWIS range of backhoes are specifically designed to fit most makes of tractors from 15HP compact tractors up to 60+HP agricultural tractors.
More informationUPDATED v6.1. Cargo Van Racks & Interior Equipment RAM 2017 PRODUCTS CATALOG
UPDATED.. v. Cargo Van Racks & Interior Equipment RAM 0 PRODUCTS CATALOG WWW.KARGOMASTER.COM 800--8 FOR COMPACT CARGO VANS 0 % LESS WEIGHT REDUCE OPERATING COSTS INCREASE PAYLOAD KARGO MASTER 800--8 KARGOMASTER.COM
More informationMICHIGAN PNEUMATIC TOOL
MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders
More informationPOWER BROOM PARTS CATALOG MODEL 1305BR SERIAL NUMBER AND ABOVE
POWER BROOM PARTS CATALOG MODEL 0BR SERIAL NUMBER 000 AND ABOVE Turf Teq LLC PC0BR--0--0 Contents Part Number Page Number 0--0... Sector A... 0--0... Engine A... 0--00... Lift Arm A... 0--0... Hydro Handle
More informationLIFTING DEVICE, duplex filter / in-line filter Series AHV
Series AHV Page 1/6 The lifting devices are intended for the maintenance of filters with blind fange filter lids. They are required, if on the site of the filter no other hoisting devices are available
More informationAir Distributor Non-Sequential
Air Distributor Non-Sequential Spring Neutral Master Control The Betts air distributor is designed as a corrosion resistant, modular, lightweight and compact air distribution system that can be used to
More information9500:- SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER. CP AA5VK Art nr SPECIAL OFFER OFFER. People. Passion. Performance.
SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER 9500:- P remium Tool CP3650-120AA5VK Art nr 6151607180 Spindle thread:...m14 Wheel size:...125 mm Power:...1700 W Free speed:...12000 rpm Length:...238
More informationNew Parts Guide. Summer Every part we put into a TechSmart box is a direct result of a conversation with a professional technician.
Te c h S m a r t P a r t s. c o m ew Parts Guide Summer 2014 Every part we put into a TechSmart box is a direct result of a conversation with a professional technician. Think TechSmart First. TechSmart
More informationDMR STYLE MPSB STYLE MPSA-58 STYLE MPSA.
STYLE MPSB Double-acting three piece piston seal. 70 Durometer Nitrile with fabric reinforced Nitrile and Nylon guide rings. The sealing action is effected by the fabric reinforced Nitrile member at the
More informationPowerGrip Timing Belt Drives
PowerGrip Timing Belt Drives Single Sided Belt Drive Systems PowerGrip Timing Belt drives operate on the tooth-grip principle, with the molded teeth the belt designed to make positive engagement with the
More informationQuantum Rotary Control Monitors Weatherproof IEC
Weatherproof rotary control monitors with a choice of enclosure materials. Impervious to moisture, chemicals and solvents, they offer a variety of switching options and single or dual coil solenoid valves
More informationV200 Series Positioners
V200 Series Positioners In a single compact and rugged housing The V200 positioner incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and
More informationHigh-performance products. Designed for you!
High-performance products. Designed for you! Impact Wrenches CP6748EX-P11R ATEX Art nr 6151590570 CP6768EX-P18D ATEX Art nr 6151590580 CP6778EX-P18D ATEX Art nr 6151590590 Dust-proof (IP6) and ATEX certified
More informationCam & Groove Couplings for Liquid, Bulk, and Chemical Transfer
C 15 C Cam & Groove Couplings for Liquid, Bulk, and Chemical Transfer Campbell COBRA CampbellCrimpnology offers crimping flexibility for your liquid, bulk, and chemical transfer hose applications. CAMPBELL
More information1/8 NPT (F) 1/8 NPT (F)
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Features l Compact size (.5 OAL) l 4 Porting configurations l High flow l Single stem design l Plumbing
More informationML SERIES. Double-Acting Hydraulic Valve Actuator. Thrusts up to 1,500,000 lbs SIL-3 Capable GT3 Triple Seal Gland for Severe Service Applications
Actuation Solutions and Systems for the World s Most Challenging nvironments ML SRIS Double-Acting Hydraulic Valve Actuator Designed & ngineered for Severe-Service Applications Thrusts up to 1,500,000
More informationOVERLOAD CLUTCHES FOR INDEX DRIVES
The Driving Force in Automation OVERLOAD CLUTCHES FOR INDEX DRIVES WARNING WARNING This is a controlled document. It is your responsibility to deliver this information to the end user of the CAMCO indexer.
More informationDP_T Limit Switches. Double Insulation Plastic Casing IP65-50 mm. width. T1 - Plain plunger T10: nylon plunger T11: metal plunger 0,5 15 /
DP: two cable inlets for M16 x Cable Gland DP5: two cable inlets for M2 x Cable Gland Plastic Casing IP65-5 mm. width T1 - Plain plunger T1: nylon plunger T11: metal plunger T1 - Roller plunger T12: metal
More informationPPC PRODUCTS PARTS LISTS CATALOG 2013
PLASTIC PACKAGING COMPONENTS GROUP PPC PRODUCTS PARTS LISTS CATALOG 0 Quality Delivery Support SOLUTIONS A division of PHD PPCPARTS INDEX Page FACTORY REBUILD PROGRAM Using H Codes... Cylinders STRETCH
More informationHydraulic clamping elements
Hydraulic clamping elements hydraulic 3 Contents Product group 3 Hollow piston cylinder single-acting 3.1403 3.2130 Sliding clamp single-acting compact classic 3.2202 3.2204 Angular clamping element single
More informationVEKTEK PARTS LIST THIS IS A TWO PAGE PARTS LIST. THIS FIRST PAGE APPLIES TO MODEL AT REVISION C AND LATER REVISIONS.
Copyright 986-208 209 by Vektek, Inc. 2 THIS IS A TWO PAGE PARTS LIST. THIS FIRST PAGE APPLIES TO MODEL 50-4085-00 AT REVISION C AND LATER REVISIONS. 2 2X APPLY LOW STRENGTH THREAD LOCKER TO THREADS. TIGHTEN
More informationSection J Air Control Nozzles
Section J Overview Our extensive line of air control nozzles, used in drying and blowing applications, includes products that use regenerative blowers and products that require compressed air. WindJet
More informationBulb Number Part Number Description END CAP
Bulb Number Part Number Description 5 11090-398 END CAP 6 11090-400 GRIP 8.75 7 12000-466 PULLEY COVER 13 12000-396 END CAP 14 12000-398 SPACER 15 12030-200 MAIN FRAME 22 12030-208 FOOT REST COVER 23 12030-210
More informationDF100 Control Valve. Features. Model. Patents Pending
Features NACE Service Ready Standard construction for the DF100 control valve features NACE trim. The valve bonnet and body also conform to NACE MR0175 (National Association of Corrosion Engineers) recommendations.
More informationPerformance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
More informationType 1035/El-O-Matic Rack-and-Pinion Rotary Actuator
Product Bulletin Type 1035/El-O-Matic Rack-and-Pinion Rotary Actuator Type 1035/El-O-Matic double-acting and spring-return rotary valve actuators are compact, simply-designed control devices quality-engineered
More information