TOGGLE CLAMPS AND LATCHES. See the New Secure-Lock Latch Clamps, pgs Distributed by: QUALITY DIVERSITY ECONOMY

Transcription

1 TOGGLE CLAMPS AND LATCHES See the New SecureLock Latch Clamps, pgs Distributed by: QUALITY DIVERSITY ECONOMY

2 DRIVEN BY CUSTOMER DEMAND For over 45 years, we ve served our valued, worldwide customers by providing clamps that are built to suit a wide variety of industrial and OEM applications. Because whether you need a clamp to push, pull, hold down, lock, position, or tighten, we ll either help you find exactly what you need in our catalog, or we ll modify one of our standard clamps to your exact specifications, or we ll custombuild a clamp for you! Our caring, highly skilled staff is devoted to helping you design a system that will solve both the ordinary and repetitive, and the unique and situational workholding needs. With vertical, horizontal, and push/pull action, toggle clamps offer the flexibility to provide solutions in manufacturing, assembly, storage, machine building, and shop use. We manufacture over 350 models of toggle clamps, and our new product development is ongoing and is driven by customer demand. We pride ourselves on featuring a line of clamps that offers more variety than the competition, and we are continually seeking new designs to fill a need that has not yet been met. We react to you, our valued customers, with urgency and sincere interest in meeting your requirements. We remain driven to satisfy, driven to deliver a clamping line that exceeds your expectations in quality, diversity, and economy. Please contact us and tell us how we can best serve you... CUSTOMER SERVICE : Good Hand, Inc Pioneer Blvd. Santa Fe Springs, California U.S.A. Tel : Fax : sales@valtrainc.com

3 GOOD HAND QUALITY ASSURANCE All diestamped steel parts are deburred, cleaned, and zincplated for a finish that resists corrosion and creates a smooth, easy to clean surface. Toggle mechanism designed to allow maximum clearance for ease of loading and unloading workpieces. Hand grips are covered with an oil and stain resistent red vinyl or red plastic for easy identification and to assure the safety and comfort of the operator. Flanged Washers are supplied with all Ubar and open bar models. Bolt retainers are supplied with all solid bar models. TOGGLE ACTION GH12205 The theoretical maximum holding of clamping force of a toggle action device is achieved when the three pivot points are in a straight line. To make allowance for external forces due to vibration and changing load conditions in industrial use, the proper amount of over travel of the center pivot point has been carefully calculated to yield maximum clamping pressure, while achieving a positive locking position. HOLDING CAPACITY AND CLAMPING FORCE All GOOD HAND clamps are rated by their holding capacity. This rating is the maximum force the clamp will support when locked in the closed position without creating permanent deformation. This force is measured at a point closest to the base and diminishes as the end of the bar is reached. The clamping force is defined as the actual force being applied by the clamp to the workpiece. This rating is not constant due to such variables as the location of force on the handle, the amount of force the operator applies, and the location of the spindle on the holddown bar. NOTE: Engineering changes, dimensions and specifications referenced in this catalog are subject to change without notice. Long UBolt UNIQUE Look for this logo throughout our catalog to see our clamps with unique features such as: Higher Base (Greater clearance) Side Mounting (Saves fixture space) Yokes (Clamp 2 parts with 1 stroke) Long UBolts (Extend the reach of Latch Clamps) Reverse Action (Lowers the profile of Push Pull clamps) Yoke Standard High Base Side Mount

4 INDEX GOOD HAND DESTACO CARR LANE PAGE GOOD HAND DESTACO CARR LANE PAGE GOOD HAND DESTACO CARR LANE PAGE Vertical Handle Toggle Clamps Horiztonal Handle Toggle Clamps (cont.) Push/Pull Toggle Clamps (cont.) 101A 201U CL150VTC 1 101AI 201B CL151VTC 1 101AIT 201TB 1 101AT 201T CL152VTC 1 101ASS 201SS CL150VTCS B B B U CL200VTC SS 305USS CL200VTCS HB SM U SM U CL250VTC U 202U UL 202UL SS 202SS CL250VTCS HB SM B CL251VTC T CL252VTC TB B 4 102B 4 106B U CL450VTC SS 207USS CL450VTCS HB SM TU CL452VTC UL CL453VTC TUL CL452VTC UB CL451VTC TUB ULB CL451VTC TULB S CL350VTC TS CL352VTC L CL353VTC TL CL352VTC SB CL351VTC TSB LB CL351VTC TLB U CL650VTC SS 210USS CL650VTCS UB CL651VTC S CL550VTC SB CL551VTC TU CL652VTC TUB TS CL552VTC TSB CL600VTC CL610VTC U CL850VTC UB CL851VTC S CL750VTC SB CL751VTC 8 101J 267U CL1050VTC 9 101JS 267 CL950VTC 9 Horizontal Handle Toggle Clamps U CL250HTC SS 205USS CL250HTCS I 205UB CL251HTC L 205UL CL253HTC R 205UR CL252HTC A 205S CL150HTC ASS 205SSS CL150HTCS AI 205SB CL151HTC AL 205SL CL153HTC AR 205SR CL152HTC SS B 213U CL260HTC B B 227U B 215U CL350HTC BSS 215USS CL350HTCS BI 215UB CL351HTC BS 215S CL300HTC BSI 215SB BHB BSM U CL475HTC F FL F FL D 225U CL450HTC DSS 225USS CL450HTCS DI 225UB CL451HTC DHB DSM U CL550HTC SS 235USS CL550HTCS UB CL W WL WH WLH WH WLH GB GBL GBLH G GL 20 Push/Pull Toggle Clamps 301A 601 CL50SPC B F 605 CL150SPC FSS D CL100PC CL275SPC CL250SPC EK CL350TPC CL150TPC CL250TPC SS 604SS CL350TPC C E 608 CL200PC H C E H Latch Type Toggle Clamps CL100PA SS 323RSS CL100PAS CL200PA SS 331SS CL200PAS CL300PA SS 341SS CL300PAS R 323R R 331R CL200LPA R 341R CL300LPA LUB LUBSS LUB LUBSS LUB LUBSS CL400PA R 375R CL400LPA CL500PA LP / CL500PAA CL110PA CL210PA CL310PA R 324R R 334R R 344R CL250PA LP CL250PAL LPSS CL250PASL SS 351SS CL250PAS B CL251PA LP CL251PAL LPSS CL250PASL SS 351BSS LP CL350PA LP CL350PAL CL150PA LP Toggle Pliers CL50PL CL150PL CL254PL CL454PL 37

5 INDEX (CONT.) GOOD HAND DESTACO CARR LANE PAGE Cam Type Toggle Clamps Heavy Duty Weldable Toggle Clamps 701C D K C D K M MB MLB M MB MLB M MB MLB SM 527F Vertical Handle Hold Down Action Push/Pull Straight Line Action PICTORIAL INDEX Horizontal Handle Hold Down Action PAGES 19 PAGES 1020 Latch Type Pull Action * See the new SecureLock latch clamps FType Clamps CL325PLS SS 325SS 41 Pneumatic Power Clamps 10101A 812 CL400PTC A 802U CL500PTC A 807U CL1001PTC A CL1000PTC A 810U A 810S A 847U CL2000PTC A 847S CL2001PTC A A 816 CL600PPC A 803 CL1500PPC A Yoke Assemblies YP YP YP YP YP YP Accessories 44 Appendix 45 Strong Hand Tools Product Lines 46 Toggle Pliers Squeeze Action FType Pull Down Action PAGES 2127 PAGES 2835 Cam Type Hold Down Action Pneumatic Power Heavy Duty Weldable Hold Down Action PAGES 3637 PAGES 38 PAGES 3940 Yoke Assemblies PAGES 4243 PAGE 43 Accessories Appendix *Product availability subject to change without notice. PAGE 41 Strong Hand Tools Product Lines... 46

6 VERTICAL HANDLE TOGGLE CLAMPS 1 Series 101A Cross Ref. : DESTACO Series 201U Holding Capacity: 110 lbs. (50 kg) Weight: 0.13 lb. (60 g) Bar opens 100º, Handle 56º Supplied: GHFC (9) 4 x Ø 0.17 (4 x Ø 4.4) 0.81 (20.8) 0.63 (16) (23.8) (33.3) One of the most affordable clamps. Thandle and straight base options available. (25.4) GH101A GH101ASS GH101AI GH101AIT GH101AT Description UBar, Flanged Base, Straight Handle Stainless Steel of GH101A UBar, Straight Base, Straight Handle UBar, Straight Base, THandle UBar, Flanged Base, THandle GH101A 3.30 (83.8) 2.93 (74.4) 0.32 (8) 0.62 (15.8) (24.6) 0.08 (2) 0.19 (4.8) 1.06 (27) 2 (50) Series 11002B 2 x Ø A1 B A GH13002B has hardened bushings and removable ground pins. C1 C D E Unique hole pattern for flexibility in a wide range of mounting options. F1 G1 GH13002B Base F G H N J GH11002B GH12002B GH13002B Holding Capacity 165 lbs. (75 kg) 330 lbs. (150 kg) 550 lbs. (250 kg) Supplied Bar Opens Handle Opens GHSA º 66º GHSA º 70º A A1 B C C1 D E F F1 G G1 H J K L M N Weight 0.22 (5.6) 0.22 (5.6) GHSA º 67º 0.32 (8) 0.20 (5) 0.70 (18) 0.25 (6.4) (25.4) 0.35 (8.8) GH13002B 1.32 (33.5) 0.95 (24.2) (34) (14.3) 1.06 (27) 1.65 (42) 2.01 (51.1) 0.50 (12.7) 0.63 (16) (25) K 1.14 (29) 1.38 (35) 1.69 (43) 0.39 (10) 0.51 (13) L 0.87 (22) 1.12 (28) 1.38 (35) 1.50 (38) 1.73 (44) 3.94 (100) 0.10 (2.5) 0.13 (3.2) 3.82 (97) M 0.28 lb. (128 g) lb. (143) (170 g) lb. (3.2) (196) (380 g)

7 VERTICAL HANDLE TOGGLE CLAMPS 2 Series x Ø A Cross Ref. : DESTACO Series 305 Bar opens 90º, Handle 175º GH13008 has hardened bushings and removable ground pins. This unique spacesaving clamp is very affordable. B C D E F G H J K GH13005 L M GH13005 Holding Capacity 150 lbs. (68 kg) Supplied GHFC10138 Ø A B C D E F G H J K L M Weight 0.17 (4.4) 0.35 (9) 0.50 (12.7) 0.53 (13.5) 1.03 (26.2) 0.63 (15.9) (25.4) GH13005SS Stainless Steel of GH13005 GH13007 GH13008 UNIQUE 330 lbs. (150 kg) 705 lbs. (320 kg) 13005HB GHFC56212 GHFC (7) 0.31 (7.9) 0.60 (15.2) 0.77 (19.5) 1.14 (28.9) 1.06 (27) 1.54 (39) 1.73 (44) 2.53 (64.3) 1.16 (29.4) 1.50 (38.1) 1.81 (46) 2.46 (62.7) High Base of GH (7.9) 1.40 (35.2) 2.31 (58.7) 3.46 (88.1) 0.31 (7.9) 0.50 (12.7) 0.50 (12.7) 0.87 (22.2) 1.31 (33.3) 1.21 (30.8) 1.97 (50.1) 2.66 (67.5) 2.24 (57) 3.69 (93.7) 5.32 (135) 0.13 lb. (60 g) 0.50 lb. (230 g) 1.38 lbs. (630 g) UNIQUE 13005SM & 13007SM GH13005HB (25.4) 1.21 (30.8) 0.53 (13.5) 1.03 (26.2) 0.65 (16.5) 1.02 (26) Side Mount of GH13005 and GH13007 A Unique hole pattern for flexibility in a wide range of mounting options. GH13005SM A B C D E F G H J K L GH13005SM 0.31 (7.9) GH13007SM 0.50 (12.7) 2 (50.8) 3.06 (77.8) 1.20 (30.6) 1.97 (50.1) 2.37 (60.3) 3.80 (96.7) 1.03 (26.2) 1.54 (39.2) 0.68 (17.4) 1.04 (26.3) 0.17 (4.4) 0.28 (7) 0.22 (5.6) 0.37 (9.4) 0.12 (3) 0.16 (4) 0.76 (19.5) (25.4) 1.22 (31) 1.81 (46) B C D E F J H L K G

8 VERTICAL HANDLE TOGGLE CLAMPS 3 Series Popular! Ø 0.25 (Ø 6.4) Cross Ref. : DESTACO Series 202 Holding Capacity: 200 lbs. (91 kg) Weight: 0.38 lb. (170 g) Bar opens 100º, Handle 60º Supplied: GHFC14134 (GHSA14112 for GH12050SS) 0.63 (16) 0.87 (22) 0.37 (9.5) 1.06 (27) 1.30 (33) 0.50 (12.7) 0.25 (6.4) (27) (39.7) 4 x Ø 0.20 (4 x Ø 5.2) GH12050 GH12050 GH12050SS GH12050U GH12050UL GH12055 GH12060 GH12065 GH12070 GH12075 GH12080 GH12085 Description Fixed, Flanged Base, Straight Handle Stainless Steel of GH12050 UBar, Flanged Base, Straight Handle Extra Long UBar 2.27 (58 mm) Flanged Base, Straight Handle Fixed, Straight Base, Straight Handle Solid Bar, Flanged Base, Straight Handle Solid Bar, Straight Base, Straight Handle Fixed, Flanged Base, THandle Fixed, Straight Base, THandle Solid Bar, Flanged Base, THandle Solid Bar, Straight Base, THandle GH12050U 3.74 (95) 4.21 (107) 0.38 (9.6) 0.89 (23) 1.30 (33) 0.13 (3.2) (25.4) 2.52 (64) 0.25 (6.4) 1.37 (35) UNIQUE 12050HB High Base of GH (122) 0.38 (9.6) 1.66 (42.2) UNIQUE 12050SM GH12050HB Side Mount of GH (9.6) GH12050SM 0.93 (23.5) 0.20 (5.1) 1.06 (27) 1.56 (39.7) 0.20 (5.2) 1.66 (42.2) 2.36 (60) 0.64 (16.2) 1.35 (34.2) 2.52 (64.2)

9 VERTICAL HANDLE TOGGLE CLAMPS 4 101B 0.33 (8.4) Holding Capacity: 220 lbs. (100 kg) Weight: 0.3 lb. (135 g) Bar opens 90º, Handle 65º Supplied: GHFC (24) 1.30 (33) 1.38 (35) 0.79 (20) 1.18 (30) 4.69 (119) 0.39 (10) GH101B 2.16 (55) 1.76 (45) 0.6 (15.2) 1.15 (29) 0.55 (14) 0.30 (7.5) 4 x Ø 0.19 (4 x Ø 4.8) 102B Holding Capacity: 220 lbs. (100 kg) Weight: 0.25 lb. (115 g) Bar opens 90º, Handle 65º Supplied: GHFC (8.4) 4 x Ø 0.19 (4 x Ø 4.8) 0.94 (24) 0.55 (14) 1.54 (39) 1.14 (29) (18) (28) 3.68 (94) 0.39 (10) (2) GH102B 1.54 (39) 1.14 (29)

10 VERTICAL HANDLE TOGGLE CLAMPS 5 106B 0.30 (7.6) Holding Capacity: 220 lbs. (100 kg) Weight: 0.4 lb. (184 g) Bar opens 82º, Handle 55º Supplied: GHFC14134 (19.1) 1.06 (27) 1.36 (35) 1.13 (29) 5.50 (140) 0.41 (10) 1.25 (32) 0.25 (6.5) 1.50 (38) 0.50 (13) 0.50 (13) GH106B 6 x Ø 0.19 (6 x Ø 4.8) (165) Holding Capacity: 400 lbs. (182 kg) Weight: 1.36 lbs. (620 g) Bar opens 100º, Handle 57º Supplied: GHFC (8.1) 3.12 (79.4) 4 x Ø 0.28 (4 x Ø 7.2) 1.13 (28.6) 1.94 (49.2) 1.37 (35) 2.12 (54) 7.87 (200) 2 (51) 0.13 (3.2) 4.18 (106.3) 6.39 (162.4) GH12205

11 VERTICAL HANDLE TOGGLE CLAMPS 6 Series Popular! Cross Ref. : DESTACO Series 207 Holding Capacity: 500 lbs. (227 kg) Bar opens 100º, Handle 60º Supplied: GHFC (14.7) 0.33 (8.3) 1.87 (47.6) 2.81 (71.4) 1.25 (31.8) 1.81 (46) 4 x Ø 0.28 (4 x Ø 7.2) Expanded Selection. This is the most popular vertical handle toggle clamps. Many options are available. Description Weight GH12130 Short UBar, Flanged Base, Straight Handle 0.78 lb. (355 g) GH12130SS Stainless Steel of GH12130 GH12131 Short Ubar, Flanged Base, THandle 0.81 lb. (370 g) GH12132 Long UBar, Flanged Base, Straight Handle 0.81 lb. (370 g) GH12133 Long UBar, Flanged Base, THandle 0.88 lb. (400 g) GH12135 Short UBar, Straight Base, Straight Handle 0.78 lb. (355 g) GH12136 Short UBar, Straight Base, THandle 0.81 lb. (370 g) GH12137 Long UBar, Straight Base, Straight Handle 0.81 lb. (370 g) GH12138 Long UBar, Straight Base, THandle 0.88 lb. (400 g) GH12140 Short Solid Bar, Flanged Base, Straight Handle lb. (340 g) GH12141 Short Solid Bar, Flanged Base, THandle 0.78 lb. (355 g) GH12142 Long Solid Bar, Flanged Base, Straight Handle 0.78 lb. (355 g) GH12143 Long Solid Bar, Flanged Base, THandle 0.81 lb. (375 g) GH12145 Short Solid Bar, Straight Base, Straight Handle lb. (340 g) GH12146 Short Solid Bar, Straight Base, THandle 0.78 lb. (355 g) GH12147 Long Solid Bar, Straight Base, Straight Handle 0.78 lb. (355 g) GH12148 Long Solid Bar, Straight Base, THandle 0.81 lb. (375 g) GH (154) 5.50 (140) 0.63 (16) 1.25 (32) 0.13 (3.2) 2.81 (71.4) 1.37 (35) 4.56 (116) 3.75 (95.2) 5.50 (139.7) 1.81 (46) 0.28 (7.1) UNIQUE 12130HB High Base of GH (16) 6.50 (165) 2.25 (57) 2.81 (71) 1.75 (45) UNIQUE 12130SM Side Mount of GH12130 GH12130HB 0.63 (16) 1.12 (28.5) 0.12 (3) 0.28 (7.2) 0.96 (24) 2.62 (66.7) GH12130SM 0.69 (17.5) 1.81 (46) 0.24 (6.1) 0.25 (6.4) 1.18 (30) 2.69 (68) 1.88 (48)

12 VERTICAL HANDLE TOGGLE CLAMPS 7 Series Popular! Cross Ref. : DESTACO Series 210U(SS) Holding Capacity: 750 lbs. (340 kg) Bar opens 105º, Handle 58º Supplied: GHFC38312 (GHSA38300 for GH12265SS) Hardened bushings and removable ground pins 0.43 (11) 2.46 (62.5) 4 x Ø 0.34 (4 x Ø 8.7) 1.94 (49.2) (45.3) (64.3) 1.25 (31.8) Description Weight GH (224) 7.50 (202) GH12265 UBar, Flanged Base, Straight Handle 1.40 lbs. (635 g) GH12265SS Stainless Steel of GH12265 GH12270 UBar, Straight Base, Straight Handle 1.40 lbs. (635 g) GH12275 Solid Bar, Flanged Base, Straight Handle 1.50 lbs. (680 g) GH12280 Solid Bar, Straight Base, Straight Handle 1.50 lbs. (680 g) GH12285 UBar, Flanged Base, THandle 1.57 lbs. (710 g) GH12290 UBar, Straight Base, THandle 1.57 lbs. (710 g) GH12295 Solid Bar, Flanged Base, THandle 1.62 lbs. (735 g) GH12300 Solid Bar, Straight Base, THandle 1.62 lbs. (735 g) 1.75 (45) 2.63 (67) 0.13 (3.2) 0.37 (9.5) 1.25 (31.8) 3.25 (82.5) 1.94 (49.2) 5.45 (138.5) Series Holding Capacity: 750 lbs. (364 kg) Weight: 2.18 lbs. (990 g) Bar opens 100º, Handle 65º Supplied: GHFC38312 Note the angular spindle bar. Available with open or solid spindle bars. Solid bar can be shortened, and the supplied bolt retainer welded on. Angular bar keeps the overall height low, yet bar clearance high (19.2) 0.38 (9.6) 0.56 (14.3) 1.63 (41.3) 4 x Ø 0.31 (4 x Ø 7.9) 0.37 (9.5) 2.06 (52.4) 1.25 (31.8) 2.13 (54) 1.13 (28.6) 8.62 (219) 9.69 (246) (25.4) 0.87 (22.2) Description 2.50 (64) 0.19 (4.8) GH12305 Open bar, Flanged Base GH12310 Open Bar, Straight Base GH12315 Solid Bar, Flanged Base GH12320 Solid Bar, Straight Base GH (116) 0.4 (11)

13 VERTICAL HANDLE TOGGLE CLAMPS 8 Series Welder s Choice! Holding Capacity: 880 lbs. (400 kg) Bar opens: 85º, Handle 58º Supplied: GHSA38300 (GHSA38200 for GH10448) Hardened bushings and removable ground pins This rugged yet smooth functioning clamp is designed for use in ovens. It has a rounded handle with no plastic cover (238) (25.4) GH (50.8) 4 x Ø 0.41 (4 x Ø 11) Description Weight GH10444 Long Bar 1.92 lbs. (870 g) GH10448 Short Bar 1.85 lbs. (840 g) 0.24 (6) 1.42 (36) 2.24 (57) 1.18 (30) 1.57 (40) 1.97 (50) 2.76 (70) Series (45.2) Cross Ref. : DESTACO Series 247 Holding Capacity: 1,000 lbs. (450 kg) Weight: 2.76 lbs. (1,250 g) Bar opens 100º, Handle 58º (with roll pin) Bar opens 135º, Handle 70º (without roll pin) Supplied: GHSA12300 Hardened bushings and removable ground pins 0.53 (13.4) 3.13 (79.4) 4 x Ø 0.34 (4 x Ø 8.7) 2.53 (64.3) 8.87 (225) 9.50 (241) 0.89 (22.6) Roll Pin Position Description 2 (51) 2.63 (67) 0.20 (5) 0.13 (3.2) 0.37 (9.5) GH10247 GH10248 GH10249 UBar, Flanged Base UBar, Straight Base Solid Bar, Flanged Base 5 (126.4) 1.25 (31.8) 2 (50.8) GH10250 Solid Bar, Straight Base GH10247

14 VERTICAL HANDLE TOGGLE CLAMPS 9 Series 101J Cross Ref. : DESTACO Series 267 Holding Capacity: 1,200 lbs. (550 kg) Weight: 5.6 lbs. (2,540 g) Bar opens 100º, Handle 48º (with roll pin on top) Bar opens 140º, Handle 60º (with roll pin on bottom) Supplied: GHSA58500 Hardened bushings and removable ground pins 0.66 (17) 0.50 (13) 3 (76.2) 2 (51) (70) (95.2) 12 (305) 6.02 (153) Roll Pin 1.25 (31.8) Top Pin Pos (83) Bottom Pin Pos. GH101J GH101JS Description UBar, Flanged Base Solid Bar, Flanged Base GH101J 0.24 (6)

15 HORIZONTAL HANDLE TOGGLE CLAMPS 10 Series Holding Capacity: 50 lbs. (22.7 kg) Weight: 0.06 lb. (25 g) Bar opens: 90º, Handle 60º Supplied: GHSA08034 (Nylon) 0.94 (23.8) 0.63 (16) 0.38 (9.6) 0.19 (4.76) 0.09 (2.4) 0.17 (4.4) 0.41 (10.4) Low GH (13.5) 0.95 (24.2) 0.40 (10.2) GH22005 GH22010 GH22025 GH22030 Description High Bar, Flanged Base High Bar, Straight Base Low Bar, Flanged Base Low Bar, Straight Base 0.47 (12) 0.40 (10.2) 1.03 (26.14) 0.15 (4) 0.63 (15.9) 0.94 (23.8) 2.81 (71.46) 0.05 (1.2) Series 201 Cross Ref.: DESTACO Series 205 Holding Capacity: 60 lbs. (27 kg) Weight: 0.09 lb. (40 g) Bar opens: 90º, Handle 80º Supplied: GHSA08034 (Nylon) This compact clamp is the most economical horizontal toggle clamp. Most suitable for holding down sheet metal or circuit boards. Many spindle bar and base combinations available (23.8) 0.31 (8) 0.63 (16) 0.19 (5) Ø 0.17 (Ø 4.3) GH201 Series 0.79 (20) 3.11 (79) 0.17 (4.4) Ø 0.37 (Ø 9.5) GH201A Series Description 0.13 (3.2) GH201 GH201SS GH201I GH201L GH201R GH201A GH201ASS GH201AI GH201AL GH201AR UBar, Flanged Base Stainless Steel of GH201 UBar, Straight Base UBar, Left Hand Flanged Base UBar, Right Hand Flanged Base Fixed Bar, Flanged Base Stainless Steel of GH201A Fixed Bar, Straight Base Fixed Bar, Left Hand Flanged Base Fixed Bar, Right Hand Flanged Base GH201 GH201A 0.67 (17) 1.02 (26) 0.38 (9.7) 0.16 (3.95) 0.72 (18.3) 0.9 (23) 0.06 (1.5) 0.44 (11.1) 0.63 (15.9) 0.94 (23.8) 3.2 (81.2) 0.71 (18)

16 HORIZONTAL HANDLE TOGGLE CLAMPS & 20800SS Holding Capacity: 66 lbs. (30 kg) Weight: 0.09 lb. (40 g) Bar opens: 80º, Handle 88º Supplied 0.16 (4) 0.77 (19.6) 0.45 (11.5) 0.33 (8.3) 0.17 (4.2) 0.22 (5.5) GH (32) 0.86 (22) 0.49 (12.5) 0.35 (9) Description (6) (14) 1.10 (28) 0.55 (14) 0.95 (24) 0.06 (1.6) GH20800 Flanged Base GH20800SS Stainless Steel of GH (76.2) Holding Capacity: 66 lbs. (30 kg) Weight: 0.22 lb. (100 g) Bar opens: 65º, Handle 55º Supplied 1.18 (30) 0.87 (22) 0.20 (5) 4 x Ø 0.18 (4 x Ø 4.5) 0.35 (9) (25.4) 0.16 (4) GH (24) 1.48 (37.5) 1.44 (36.5) 4.33 (110)

17 HORIZONTAL HANDLE TOGGLE CLAMPS & Holding Capacity: 150 lbs. (68 kg) Weight: 0.24 lb. (110 g) Bar opens: 90º, Handle 90º Supplied: GHFC (6.4) 4 x Ø 0.21 (4 x Ø 5.3) 0.87 (22.1) 1.37 (35) Almost identical to the 201B model (pg. 13). Lighter and more affordable (12.7) 83º 70º GH (40.3) (25.4) 0.06 (1.5) GH22100 GH22105 Description Flanged Base Straight Base 2.46 (62.5) 1.06 (27) 1.56 (40) 5.59 (141.9) 0.25 (6.35) Series 20752B A B C D Bar opens: 94º, Handle 76º Supplied. 4 x Ø E1 E The hunch back design leaves extra room for your fingers. All models have the red ribbed handles and come with hex bolt spindles. F 20752B Base G H J K G GH21502B GH20752B GH21502B GH22502B Holding Capacity 165 lbs. (75 kg) 330 lbs. (150 kg) 550 lbs. (250 kg) A B C D E Ø E1 F G H J K L M N Weight 1.06 (27) 1.57 (40) 1.85 (47) 1.10 (28) 1.22 (31) 0.87 (22) 1.02 (26) 0.21 (5.3) 0.24 (6.2) 0.35 (9) 0.22 (5.5) 0.26 (6.6) 0.20 (5.2) 0.66 (16.8) 0.53 (13.5) 1.02 (26) 1.02 (26) L 0.37 (9.5) 0.55 (14) 0.69 (17.5) (25.1) 1.34 (34) M 0.08 (2) 0.10 (2.5) 0.12 (3) N 1.41 (36) 2.44 (62) 3.11 (79) (25) 1.50 (38) 1.65 (42) 4.11 (104) 6.73 (171) 8.62 (219) 0.22 lb. (100 g) 0.50 lb. (230 g) 0.95 lb. (430 g)

18 HORIZONTAL HANDLE TOGGLE CLAMPS 13 Series 201B Popular! 0.25 (6.3) Cross Ref.: DESTACO Series 215 Holding Capacity: 200 lbs. (90 kg) Weight: 0.29 lb. (130 g) Bar opens: 85º, Handle 60º Supplied: GHFC14134 For Solid Bar A Ø B 0.22 (5.5) C (25.4) 1.06 (27) 1.45 (37) (22) (36) GH201B Description A Ø B C GH201B UBar, Flanged Base 0.29 (7.4) GH201BSS Stainless Steel of GH201B 0.29 (7.4) GH201BI UBar, Straight Base 0.29 (7.4) GH201BS Solid Bar, Flanged Base 0.28 (7.1) 0.16 (4) GH201BSI Solid Bar, Straight Base 0.28 (7.1) 0.16 (4) UNIQUE 201BHB High Base of GH201B Weight: 0.32 lb. (146 g) 0.50 (12.7) (25.1) 2.24 (56.9) 85º 0.08 (2) 5.65 (143.5) 0.5 (12) 60º 85º 73º 0.50 (12.7) GH201BHB 1.66 (42.2) UNIQUE 201BSM 2.17 (55.1) 1.45 (36.8) Side Mount of GH201B Weight: 0.36 lb. (163 g) 0.50 (12.5) GH201BSM 1.04 (26.4) 0.12 (3) 0.70 (17.8) 0.24 (6.1) 0.87 (22.1) 1.42 (36) 0.20 (5.1) 0.69 (17.4) 1.77 (45) 2.10 (53.25) 1.73 (44)

19 HORIZONTAL HANDLE TOGGLE CLAMPS Cross Ref.: DESTACO 317U Holding Capacity: 220 lbs. (100 kg) Weight: 0.88 lb. (400 g) Bar opens: 185º, Handle 60º Supplied: GHFC56212 Mount vertically and horizontally 0.35 (9) 0.35 (9) 1.26 (32) 8 x Ø 0.26 (8 x Ø 6.7) 0.63 (16) (25.4) 1.50 (38) 0.63 (16) 4.50 (114) 185º GH (163) 2.75 (70.1) 1.26 (32) 2.56 (65) 1.38 (35) 4.42 (112.3) Series 203F & 202F Holding Capacity: 500 lbs. (227 kg) Bar opens: 85º, Handle 58º Supplied: GHFC (47) 1.14 (29) 0.31 (8) 4 x Ø 0.28 (4 x Ø 7) GH203F 0.63 (16) 1.34 (34) 0.12 (3) 1.61 (41) A 2.24 (57) 7.80 (198) GH202FL 0.63 (16) Description A Weight GH203F GH203FL GH202F GH202FL UBar, Flanged Base Long UBar, Flanged Base UBar, Side Mounted Long UBar, Side Mounted 2.24 (57) 3.70 (94) 2.05 (52) 3.50 (89) lb. (340 g) 0.84 lb. (380 g) 0.85 lb. (385 g) 0.94 lb. (425 g) 2.26 (60) 1.65 (42) (25.4) 0.12 (3) A 2.42 (62) 7.80 (198)

20 HORIZONTAL HANDLE TOGGLE CLAMPS 15 Series 225D Popular! Cross Ref.: DESTACO Series 225 Holding Capacity: 500 lbs. (227 kg) Weight: 0.59 lb. (265 g) Bar opens: 90º, Handle 65º Supplied: GHFC56212 This is the most popular horizontal handle toggle clamp. See Series GH22165 for extra long UBars (35) (22.2) 0.34 (8.7) 4 x Ø 0.26 (4 x Ø 6.7) 0.82 (20.8) 0.50 (12.7) 1.37 (35) 1.90 (48.3) GH225D GH225D GH225DSS GH225DI Description UBar, Flanged Base Stainless Steel of GH225D UBar, Straight Base 0.25 (6.4) (25.4) 2.75 (70) 1.50 (38) 6.81 (173) 0.26 (6.7) UNIQUE 225DHB 6.61 (168) High Base of GH225D Weight: 0.63 lb. (286 g) 0.50 (12.7) 2.13 (54) GH225DHB 2.75 (70) 1.50 (38) UNIQUE 225DSM Side Mount of GH225D Weight: 0.69 lb. (315 g) 0.26 (6.7) 0.50 (12.7) 1.07 (27) 1.07 (27.3) 0.65 (17) 2.65 (67) GH225DSM 0.23 (5.9) 1.13 (28.6) 1.71 (43.4) 2.63 (66.8) 1.95 (49.4)

21 HORIZONTAL HANDLE TOGGLE CLAMPS 16 Series Holding Capacity: 550 lbs. (250 kg) Bar opens: 96º, Handle 88º Supplied: GHFC (35) (22) 0.33 (8.4) Expanded selection. Larger version of Series 225D B 0.28 (7.1) Ø 0.33 (Ø 8.3) 0.25 (6.4) 1.25 (32) 0.56 (14.3) C A 0.13 (3.2) GH22165 Description A B C D Weight GH22165 Short UBar, Flanged Base 2.81 GH22170 GH22175 Short UBar, Straight Base Short Solid Bar, Flanged Base 1.31 (33.3) (71.4) 2.99 GH22180 Short Solid Bar, Straight Base (76) 1.81 (46) 7.28 (185) 0.63 lb. (285 g) 0.66 lb. (300 g) B 0.25 (6.4) (25.4) 1.25 (32) 2.19 (56) D GH22185 Long UBar, Flanged Base 6.50 GH22190 GH22195 Long UBar, Straight Base Long Solid Bar, Flanged Base 1.13 (28.6) (165) 6.56 GH22200 Long Solid Bar, Straight Base (167) 1.63 (41) (279.2) 0.78 lb. (360 g) 0.81 lb. (365 g) Holding Capacity: 550 lbs. (250 kg) Weight: 0.46 lb. (209 g) Bar opens: 72º, Handle 72º Supplied: GHSA (38) 0.37 (9.4) (25) 4 x Ø 0.28 (4 x Ø 7) 0.55 (14) 2 (51) 1.26 (32) 0.79 (20) GH (39) 0.09 (2.3) 7.83 (199)

22 HORIZONTAL HANDLE TOGGLE CLAMPS Holding Capacity: 600 lbs. (280 kg) Weight: 0.96 lb. (435 g) Bar opens: 80º, Handle 80º Supplied (44) (28) 0.43 (11) 4 x Ø 0.28 (4 x Ø 7) 0.79 (20) GH (71) 1.50 (38) 0.91 (23) 0.12 (3) 3.15 (80) 2.56 (65) 9.76 (248) Holding Capacity: 600 lbs. (273 kg) Weight: 1.41 lbs. (640 g) Bar opens: 111º, Handle 94º Supplied: GHFC (57) (41) (33) 0.31 (8) Ø 0.33 (Ø 8.3) Ø 0.26 (Ø 6.7) 0.69 (17.5) GH (46) 0.16 (4) 4.09 (104) 1.63 (41.3) 2 (50.8) 3.13 (79.4)

23 HORIZONTAL HANDLE TOGGLE CLAMPS Holding Capacity: 620 lbs. (280 kg) Weight: 0.84 lb. (380 g) Bar opens: 80º, Handle 80º Supplied (57) (37) 0.47 (12) 4 x Ø 0.41 (4 x Ø 11) GH (20) 1.44 (37) 0.12 (3) 3.35 (85) 1.18 (30) 2.24 (57) Series Holding Capacity: 750 lbs. (340 kg) Weight: 1.41 lbs. (640 g) Bar opens: 85º, Handle 50º Supplied: GHFC (11) (57.2) (41.3) 4 x Ø 0.33 (4 x Ø 8.3) GH (44.4) 2.45 (62.2) 0.16 (4) GH20235 GH20235SS GH20236 Description UBar, Flanged Base Stainless Steel of GH20235 UBar, Straight Base 0.31 (7.95) 4.26 (108.3) 1.63 (41.3) 2.25 (57.1) (295.6)

24 HORIZONTAL HANDLE TOGGLE CLAMPS 19 Series 200W Holding Capacity: 880 lbs. (400 kg) Bar opens: 84º, Handle 85º Woodworking models These clamps have an extra high and long spindle bar. The 220WH and 220WLH have an extra lever to increase clamping leverage (50) 1.18 (30) 0.50 (12.6) 4 x Ø 0.39 (4 x Ø 10) GH200W 0.81 (20.5) A B 1.65 (42) 2.76 (70) C GH220WH GH220WLH GH200WLH A B C Weight GH200W GH200WL GHFC (54) 2.36 (60) 4.33 (110) 9.45 (240) (290) 1.32 lbs. (600 g) 1.41 lbs. (640 g) GH200WH 2.36 (60) 9.45 (240) 1.54 lbs. (700 g) GH200WLH GH220WH GHFC (79) 4.33 (110) 2.36 (60) (290) 9.45 (240) 1.64 lbs. (745 g) 1.74 lbs. (790 g) GH220WLH 4.33 (110) (290) 1.83 lbs. (830 g)

25 HORIZONTAL HANDLE TOGGLE CLAMPS 20 Series 204GB Holding Capacity: 1,400 lbs. (630 kg) Bar opens: 91º, Handle 94º Supplied: GHSA12300 This clamp is based on the GH204G design, without the cast iron base (71) 2 (51) 0.50 (12.7) 4 x Ø 0.37 (4 x Ø 9.5) (25.4) A 0.24 (6) GH204GB 2.24 (57) C 3.27 (83) B GH204GBLH Description A B C Weight GH204GB GH204GBL GH204GBLH Short Bar, Low Base Long Bar, Low Base Long Bar, High Base 1.77 (45) 1.77 (45) 2.79 (71) (269) (316) (316) 3.15 (80) 5 (127) 5 (127) 2.60 lbs. (1,180 g) 2.78 lbs. (1,260 g) 3.23 lbs. (1,465 g) Series 204G Holding Capacity: 1,400 lbs. (636 kg) Weight: 2.69 lbs. (1,220 g) Bar opens: 91º, Handle 94º Supplied: GHSA (48) 1.18 (30) 0.50 (12.7) Heavy Duty This clamp has five mounting holes on the cast iron base. Constructed with extra thick plate stock with hardened ground pins and bushings for smooth action and long life. GH204G 4.94 (125) 4 x Ø 0.33 (4 x Ø 8.3) (317) GH204GL (25.4) GH204G 2 (51) 0.39 (10) 0.50 (13) GH204G GH204GL Description Open Bar, Ductile Iron Base Long Closed Bar, Ductile Iron Base 1.38 (35) 1.38 (35) 3 (76.2) 3.54 (90) (268)

26 PUSH/PULL TOGGLE CLAMPS A & 301B Cross Ref.: DESTACO 601 Holding Capacity: 100 lbs. (45 kg) Weight: 0.11 lb. (50 g) Handle opens: 190º Plunger stroke: 0.63 (15.9 mm) supplied: GHSA08034 (Nylon) 0.63 (15.9) 0.25 (6.4) 1/420 THD 3 x Ø 0.17 (3 x Ø 4.4) 1.55 (39.4) 2.85 (72.4) GH301B 0.63 (15.9) 1.30 (33) 0.39 (10) 1.06 (27) Economical, miniature pushpull clamp with long plunger stroke. GH301A 832 THD GH301A GH301B Description 832 Thread 1/420 Thread GH301A 1.71 (43.5) 0.50 (12.7) 1.37 (35) 2.67 (68) Holding Capacity: 110 lbs. (50 kg) Weight: 0.15 lb. (70 g) Handle opens: 93º Plunger stroke: 0.43 (11 mm) supplied 1.42 (36) (25.3) 4 x Ø 0.21 (4 x Ø 5.3) 2.48 (63) 0.85 (21.6) M (15) UNIQUE REVERSE ACTION GH (1.6) 0.59 (15) (10) D (14) E 1.18 (30) 4.29 (109) Holding Capacity: 110 lbs. (50 kg) Weight: 0.22 lb. (100 g) Handle opens: 66º Plunger stroke: 0.39 (10 mm) supplied 1.61 (41) 1.10 (28) Ø 0.32 (Ø 8) M (7.5) 0.71 (18) 4 x Ø 0.20 (4 x Ø 5.2) 0.59 (15) GH (12.5) 0.51 (13) 2.83 (72) 0.94 (24) 1.77 (45) 5.1 (128.5)

27 PUSH/PULL TOGGLE CLAMPS 302F & 302FSS Popular! 22 Cross Ref.: DESTACO 605 Holding Capacity: 300 lbs. (136 kg) Weight: 0.66 lb. (300 g) Handle opens: 180º Plunger stroke: 1.25 (32 mm) supplied: GHSA56200 Stainless Steel model GH302FSS available 2.20 (56) 1.61 (41) 4 x Ø 0.20 (4 x Ø 5.5) The best selling midsize pushpull clamp. Accepts all 5/1618 spindles (81.6) 5/1618 THD 0.96 (24.6) UNIQUE 302D & GH302F REVERSE ACTION 0.28 (7) 1.38 (35) 1.98 (50.3) 3.55 (90.2) Holding Capacity: 350 lbs. (160 kg) Weight: 1.00 lb. (454 g) Handle opens: 45º Plunger stroke: 0.47 (12 mm) Stainless Steel model GH302FSS available Plunger locks in extended position only (72) 2 (51) 3/824 4 x Ø 0.25 (4 x Ø 6.3) GH302D GH30282 Description Flanged Base Straight Base GH302D 0.85 (22) 1.68 (43) 0.12 (3) 0.41 (10.5) 1.57 (40) 3 (76) 2.76 (70) 8.46 (215) Cross Ref.: DESTACO 609 Holding Capacity: 400 lbs. (180 kg) Weight: 0.85 lb. (397 g) Handle opens: 180º Plunger stroke: 1.25 (31.8 mm) supplied: GHSA56200 Accepts all 5/1618 diameter spindles Similar to GH302F. Addition of safety pins minimizes finger pinch (55.6) 3.35 (85) 1.62 (41.2) Ø 0.50 (Ø 12.7) 5/1618 THD 4 x Ø 0.20 (4 x Ø 5.2) 0.97 (24.6) Deep (25.4 Deep) 0.12 (3) 0.28 (7) 1.34 (34) GH (47.8) 3.60 (91.5)

28 PUSH/PULL TOGGLE CLAMPS Ø 0.47 (Ø 12) Holding Capacity: 400 lbs. (180 kg) Weight: 0.76 lb. (345 g) Handle opens: 145º Plunger stroke: 1.18 (30 mm) supplied: GHSA56200 Accepts all 5/1618 diameter spindles 1.97 (50) 4 x Ø 0.26 (4 x Ø 6.5) 1.34 (34) 3.86 (98) 5/1618 THD 0.79 (20) 0.12 (3) GH (8) 1.57 (40) 4.92 (125) 1.38 (35) Cross Ref.: DESTACO 603 Holding Capacity: 600 lbs. (272 kg) Weight: 0.78 lb. (355 g) Handle opens: 180º Plunger stroke: 1.25 (31.8 mm) supplied: GHSA56200 Accepts all 5/1618 diameter spindles This clamp has a forged alloy steel base, and lower profile handle (47.6) 3.35 (85) 1.31 (33.3) Ø 0.44 (Ø 10.9) 0.97 (24.6) 5/1618 THD 1.25 (31.8) (25.4) 4 x Ø 0.22 (4 x Ø 5.6) GH (4.8) 1.44 (36.5) 1.99 (50.5) 2.28 (58) 4.82 (122.5) UNIQUE & REVERSE ACTION Holding Capacity: 650 lbs. (295 kg) Weight: 2.80 lbs. (1,270 g) Handle opens: 45º Plunger stroke: 0.9 (23 mm) Plunger locks in extended position only (83) 2.27 (57.7) 0.94 (24) 1/213 THD 4 x Ø 0.35 (4 x Ø 9) GH30290 GH30292 Description Flanged Base Straight Base GH (49) 2.64 (67) 0.18 (4.5) 0.48 (12.2) 1.97 (50) 2.43 (61.7) 3.62 (92) (309)

29 PUSH/PULL TOGGLE CLAMPS UNIQUE REVERSE ACTION 24 Cross Ref.: DESTACO 620 Holding Capacity: 660 lbs. (300 kg) Weight: 1.36 lbs. (615 g) Handle opens: 76º Plunger stroke: 1.10 (28 mm) supplied Accepts all M8 diameter spindles Plunger locks in extended position only (56) 1.57 (40) Ø 0.61 (Ø 15.6) M8 THD 4 x Ø 0.33 (4 x Ø 8.5) 1.69 (43) 0.13 (3.2) GH (40) 1.46 (37) 2.24 (57) 0.35 (9) (305) LOW PROFILE 2.19 (56) 0.50 (13) 1.63 (41.3) Cross Ref.: DESTACO 607 Holding Capacity: 700 lbs. (318 kg) Weight: 1.54 lbs. (700 g) Handle opens: 180º Plunger stroke: 1.63 (41.3 mm) supplied: GHSA56200 Accepts all 5/1618 diameter spindles 3.28 (83) (25.4) 5/1618 THD 6 x Ø 0.28 (6 x Ø 7.1) GH (17.5) 0.19 (4.8) (34.9) 1.63 (41.3) (16) 1.72 (43) 4.31 (110) & Cross Ref.: DESTACO 610, 618 Holding Capacity: 800 lbs. (364 kg) Weight: 1.76 lbs. (800 g) Handle opens: 180º Plunger stroke: 1.63 (41.3 mm) supplied: GHSA38300 Accepts all 3/816 diameter spindles Constructed with heavy gage sheet metal, this is an economical long stroke pushpull clamp. GH36010 GH36012 Description Flanged Base Straight Base GH (57.2) 4.80 (122) 1.63 (41.3) Ø 0.62 (Ø 15.7) 1.75 (44) 2.56 (65) 3/816 THD 0.25 (6) 4 x Ø 0.34 (4 x Ø 8.7) 0.31 (8) 1.63 (41.3) 1.91 (48.6) 2.25 (57.2) 3.87 (98) 6.74 (171.3)

30 PUSH/PULL TOGGLE CLAMPS EK Holding Capacity: 1,000 lbs. (454 kg) Weight: 2.13 lbs. (965 g) Handle opens: 190º Plunger stroke: 1.97 (50 mm) (64) (59) 0.35 (9) 3.07 (78) This clamp has a key way to keep the plunger from rotating (145) 1/213 THD GH303EK (25.4) 1.81 (46) 0.16 (4) 2.44 (62) 6.22 (158) 3.62 (92) Cross Ref.: DESTACO 630 Holding Capacity: 2,500 lbs. (1,135 kg) Weight: 2.06 lbs. (935 g) Handle opens: 180º Plunger stroke: 2 (50.8 mm) supplied Accepts all 3/816 diameter spindles This heavy duty clamp has a forged alloy steel base. UNIQUE & GH (57) 1.63 (41.3) Ø 0.62 (Ø 15.9) 2.95 (75) 3/816 THD 0.81 (20.6) 1.26 (32) 0.24 (6) 0.50 (12.7) 2 (50.8) 1.37 (34.9) A 1.63 (41.3) 6 x Ø 0.34 (6 x Ø 8.7) 5 (127.8) This pushpull clamp has a small, special spacesaving base that easily detaches for reverse positioning. Supplied. Ø B C D E F G H J 45º M N K Ø L GH30250 GH30450 Holding Capacity 550 lbs. (250 kg) 990 lbs. (450 kg) Handle Opens 190º 185º GH30450 Plunger Stroke 1.26 (32) 1.50 (38) A Ø B C D E F G H J K Ø L M N P Q R Weight 0.26 (6.5) 0.33 (8.5) 1/420 3/ (12) 0.79 (20) 0.16 (4) 0.18 (4.5) 0.67 (17) 0.87 (22) 0.39 (10) 0.51 (13) 1.18 (30) 1.18 (30) 1.65 (42) 1.77 (45) 2.24 (57) 2.52 (64) P 3/ (11) 0.63 (16) Q 5.35 (136) 6.81 (173) 3.35 (85) 4.72 (120) 2 (51) 2.34 (60) 0.91 (23) 1.18 (30) 0.98 (25) 1.18 (30) R 0.85 lb. (385 g) 1.70 lbs. (774 g)

31 PUSH/PULL TOGGLE CLAMPS 26 Series T THD Supplied with jam nut on the work side. supplied. B All three of these plunger type push/pull clamps have threaded collars for mounting in threaded, or through holes. All clamps are supplied with thin lock nuts. Threaded mounting plates and brackets are also available as options. D E A F THD, G Deep Ø H J K GH36205 GH36225 Description GH36205 Mounting Bracket for GH36204 GH36225 Mounting Bracket for GH36224 GH36224 L Cross Ref. DESTACO GH GH Holding Capacity Plunger Stroke 200 lbs (91 kg) (20.3) 300 lbs (136 kg) (40) A B D E F G Ø H J K L T Weight 2.53 (64.3) 4.31 (109.5) 0.95 (24) 1.13 (28.6) 0.91 (23) (25.4) 0.25 (6.4) 0.25 (6.4) 1/420 5/ (15.8) (25.4) 0.37 (9.4) 0.43 (10.9) GH36204SS 604SS Stainless Steel of GH36204 GH lbs. (318 kg) 2.63 (66.7) 6.66 (169.2) 1.57 (40) 1.61 (41) 0.25 (6.4) 3/ (32) 0.63 (15.9) 0.84 (21.3) 1.60 (40.7) 2.72 (69) 0.50 (12.7) 0.63 (16) 0.87 (22) 3.07 (78) 3.86 (98) 5.63 (143) 5/818 3/ lb. (113 g) 0.60 lb. (270 g) lbs. (690 g) Series 304 & 305 All six of these push/pull clamps have a ductile iron base for close fit machining, strength and durability. All the shafts are ground to fit the reamed hole, so the plunger can be used for locating purposes as well as clamping. The plunger locks in both forward and retracted positions. The H model clamps are made with hardened pins and bushings for durability. A B C GH304 Series 4 x Ø D GH305 Series E E G THD H Deep GH305C Description Holding Capacity Supplied GH304C 45º Handle 500 lbs. (227 kg) GH305C 90º Handle 500 lbs. (227 kg) GHSA56200 GH304E 45º Handle 850 lbs. (386 kg) GH305E 90º Handle 850 lbs. (386 kg) GHSA38300 GH304H 45º Handle 1,500 lbs. (680 kg) GHSA12300 GH305H 90º Handle 1,500 lbs. (680 kg) Plunger Stroke 1.26 (32) 1.65 (42) 2.36 (60) GH304H A B Ø C Ø D E F G H J K L M N P Weight 2.25 (57.2) 2.25 (57.2) 2.81 (71.4) 1.63 (41.4) 1.63 (41.4) 2 (50.8) 0.50 (12.6) 0.63 (15.9) 0.76 (19.2) 0.26 (6.7) 0.33 (8.3) 0.33 (8.3) 2.94 (75) 3.56 (25.4) (91) 3.77 (95.8) 1.25 (31.8) 4.83 (123) 5.25 (133) 1.75 (44.4) 6.76 (172) 5/ (30.2) 3/816 1/213 F 1.57 (40) 1.94 (49.2) 0.19 (4.8) 0.20 (5) 0.25 (6.4) N J 1.38 (35) 1.63 (41.4) 2 (50.8) L P 0.81 (20.6) 1.25 (31.8) 2 (50.8) 2.06 (52.4) 2.31 (58.8) 2.88 (73.2) K M 2.10 (53.3) 3.06 (77.7) 4.76 (121) 4.94 (125.6) 6.23 (158.2) 9.38 (238) lb. (340 g) lb. (340 g) 1.28 lbs. (580 g) 1.28 lbs. (580 g) 3.26 lbs. (1,480 g) 3.26 lbs. (1,480 g)

32 PUSH/PULL TOGGLE CLAMPS 27 Heavy Duty s High strength steel construction, broached body and precise ground plunger. Hardened steel pins and bushings are used for pivot joints. Supplied with separate handle and base. Users can weld them at desired position. These clamps can be mounted using base (supplied) or by drilling a hole in fixture and welding in place. Clamp handle can be rotated to any position & Compact design with maximum plunger travel. Plunger locks in extended position only. Ø H A E THD Ø F G L M GH30509 B C D J K GH30509 GH30609 Holding Capacity 2,500 lbs. (1,136 kg) 5,000 lbs. (2,273 kg) Supplied GHSA12300 GHSA58500 Plunger Stroke 1.81 (46) 2.34 (60) A B C D E Ø F G Ø H J K L M Weight 6 (152.4) 6 (152.4) 2.76 (70) 3.56 (90.5) 0.31 (8) 0.44 (11.2) 1.19 (30) 1.58 (40) 1/213 5/811 (25.4) (25.4) 1.5 (38.1) 0.85 (21.7) 1.07 (27.2) 2 (50.8) 2.69 (68.3) 5.91 (150) 7.80 (198) 1.37 (34.9) 1.75 (44.4) 2.91 (74) 3.43 (87) 2.93 lbs. (1,330 g) 6.22 lbs. (2,820 g) Ø H & Plunger locks at both ends of travel. A E THD GH30519 D B Ø F G C J K L M GH30519 GH30619 Holding Capacity 2,500 lbs. (1,136 kg) 5,000 lbs. (2,273 kg) Supplied GHSA12300 GHSA58500 Plunger Stroke 2.34 (60) 3.06 (78) A B C D E Ø F G Ø H J K L M Weight 6 (152.4) 6 (152.4) 2.76 (70) 3.56 (91) 0.31 (8) 0.44 (11.2) 1.19 (30) 1.58 (40) 1/213 5/811 (25.4) (25.4) 1.5 (38.1) 0.85 (21.7) 1.07 (27.2) 2 (50.8) 2.69 (68.3) 8.34 (212) (283) 1.37 (34.9) 1.75 (44.4) 2.91 (74) 3.43 (87) 3.62 lbs. (1,640 g) 7.72 lbs. (3,500 g)

33 LATCH TYPE TOGGLE CLAMPS 28 Series 431 N Supplied with latch plate and standard Ubolt Optional Long UBolts available 2 x Ø Q 4 x Ø G M P K L A B D E GH431 GH40341 C F Description GH40323SS Stainless Steel of GH40323 Ø J R GH431SS Stainless Steel of GH431 GH40341SS Stainless Steel of GH40341 H Cross Ref. DESTACO GH GH GH Holding Capacity 360 lbs. (163 kg) 700 lbs. (318 kg) 2,000 lbs. (900 kg) A B C D E F Ø G H Ø J K L M N P Ø Q R Weight 0.24 (6) 0.27 (6.8) 0.37 (9.5) 0.39 (9.9) 0.45 (11.5) (19.1) 0.78 (19.8) (25.4) 1.50 (38.1) 0.20 (5.2) 0.25 (6.4) 0.37 (9.5) 0.63 (15.9) 1.63 (41.3) 1.03 (26.2) 1.56 (39.7) 2.37 (60.3) 0.17 (4.4) 0.26 (6.7) 0.34 (8.6) 0.08 (2) 0.12 (3) 0.16 (4) 0.16 (4) 0.20 (5) 0.31 (8) 1.05 (26.6) 1.75 (44.5) 1.11 (28.2) 1.75 (44.4) 2.13 (54) 0.94 (24) 1.50 (38) 2.05 (52) 2.17 (55) 3.44 (87.5) 4.50 (114.5) 1.25 (31.8) 1.50 (38.1) 0.17 (4.4) 0.25 (6.3) 0.33 (8.5) 1.23 (31.3) 1.67 (42.3) 3 (76.1) 0.16 lb. (70 g) 0.50 lb. (225 g) 1.5 lbs. (680 g) NEW 40323R NEW! SECURELOCK MODELS! This new model features a locking lever to securely lock the clamp in the closed position. Ideal for latching applications on molds, doors, lids, and access covers. 2 x Ø 0.18 (2 x Ø 4.5) 0.51 (13) 4 x Ø 0.18 (4 x Ø 4.5) 1.11 (28.2) Cross Ref.: DESTACO 323R Holding Capacity: 360 lbs. (163 kg) Weight: 0.22 lb. (100 g) 0.24 (6) 0.39 (9.9) 0.78 (19.8) 0.21 (5.35) 1.03 (26.2) 0.61 (15.5) 2.17 (55) 0.94 (24) Ø 0.16 (Ø 4) 1.31 (33.3) GH40323R

34 LATCH TYPE TOGGLE CLAMPS 29 NEW 431R & 40341R 2 x Ø Q 4 x Ø G N M NEW! SECURELOCK MODELS! This new model features a locking lever to securely lock the clamp in the closed position. Ideal for latching applications on molds, doors, lids, and access covers. K A D P L B E C F GH431R Ø J R GH40341R H Cross Ref. DESTACO GH431R 331R GH40341R 341R Holding Capacity 700 lbs. (318 kg) 2,000 lbs. (900 kg) A B C D E F Ø G H Ø J K L M N P Ø Q R Weight 0.27 (6.8) 0.37 (9.5) 0.45 (11.5) (19.1) (25.4) 1.50 (38.1) 0.25 (6.4) 0.37 (9.5) 1.63 (41.3) 1.76 (44.7) 3.35 (85.3) 0.26 (6.7) 0.34 (8.6) 0.24 (6) 0.16 (4) 0.20 (5) 0.31 (8) 1.05 (26.6) 1.75 (44.5) 1.75 (44.4) 2.13 (54) 1.50 (38) 2.05 (52) 3.44 (87.5) 4.51 (114.5) 1.25 (31.8) 1.50 (38.1) 0.25 (6.3) 0.33 (8.5) 1.81 (46) 3 (76.1) 0.59 lb. (270 g) 1.48 lbs. (670 g) UNIQUE Optional Long UBolts When you need a longer reach, you need the LUB s; LongReach UBolts for use with latches. Ø D L L1 W GH40323LUB GH40323LUBSS GH431LUB GH431LUBSS GH40341LUB GH40341LUBSS Use with No. L L1 W Ø D GH40323, GH40323R 2.75 (70) 1.25 (31.8) 0.16 (4.1) Stainless Steel of GH40323LUB GH431, GH431R 4.5 (114) 2 (50.4) 1.25 (31.8) 0.2 (5.1) Stainless Steel of GH431LUB GH40341, GH40341R 6.25 (159) 3.13 (79.5) 1.50 (38.1) 0.3 (7.6) Stainless Steel of GH40341LUB

35 LATCH TYPE TOGGLE CLAMPS Cross Ref.: DESTACO 375 Holding Capacity: 4,000 lbs. (1,818 kg) Weight: 2.78 lbs. (1.26 kg) 5.71 (145) 2.20 (56) Both the alloy steel base and the optional latch plate are forged for strength and durability (79) 2.25 (57.2) 1.37 (35) 1.63 (41) Ø 0.41 (Ø 10.3) Ø 0.63 (Ø 16) 9.69 (246) 3.50 (89) GH40370LP GH40370LP (Sold Separately) GH (29) Ø 0.37 (Ø 9.5) 4 (102) 1.37 (34.9) 2.25 (57) 2.25 (57.2) 3.37 (86) NEW 40370R NEW! SECURELOCK MODELS! This new model features a locking lever to securely lock the clamp in the closed position. Ideal for latching applications on molds, doors, lids, and access covers (145) 2.20 (56) Cross Ref.: DESTACO 375R Holding Capacity: 4,000 lbs. (1,818 kg) Weight: 3.1 lbs. (1.41 kg) 3.13 (79) 2.25 (57.2) 1.37 (35) 1.63 (41.4) Ø 0.41 (Ø 10.3) Ø 0.63 (Ø 16) (261.85) Ø 0.37 (Ø 9.5) 4 (102) GH40370LP (Sold Separately) GH40370R 1.13 (29) 1.37 (34.9) 2.25 (57) 2.25 (57.2) 3.37 (86) 0.38 (9.6)

36 LATCH TYPE TOGGLE CLAMPS Cross Ref.: DESTACO 385 Holding Capacity: 7,500 lbs. (3,400 kg) Weight: 3.25 lbs. (1.48 kg) This extra heavy duty model and optional latch plate has all forged part construction (146.3) 2.76 (70) 3.13 (79.4) 2.25 (57.2) 0.50 (12.7) 2.13 (54) Ø 0.43 (Ø 10.3) Ø 0.63 (Ø 16) 8.63 (219.1) GH40370LP GH40370LP (Sold Separately) GH (28.6) 2.19 (56) 1.13 (28.6) Ø 0.50 (Ø 12.7) 3.69 (93.8) 1.37 (34.9) 2.25 (57.2) 2.25 (57.2) 3.38 (85.8) 0.38 (9.6) 40370LP Latch Plate for s and Cross Ref.: DESTACO / Weight: 0.9 lbs. (0.4 kg) Ø 0.63 (Ø 16) Ø 0.41 (Ø 10.3) 3.13 (79.4) 2.25 (57.2) 1.13 (28.6) GH40370LP 1.37 (34.9) 2.25 (57.2)

37 LATCH TYPE TOGGLE CLAMPS 32 Series M The unique latch offers dual mounting options: horizontal and vertical. Two pivot hole patterns are provided to accommodate two mounting positions. Supplied latch plate offers low profile clamping for side mounting applications. Ø J P R L F N Q C D E GH40870 GH40840 GH40820 mounted on a vertical position. H G Ø K A B GH40820 GH40840 GH40870 Holding Capacity 440 lbs. (200 kg) 550 lbs. (250 kg) 1,540 lbs. (700 kg) A B C D E F G H Ø J Ø K L M N P Q R Weight 0.51 (13) 1.26 (32) 1.02 (26) 1.38 (35) 2 (50.5) 0.98 (25) 1.42 (36) 0.95 (24) 1.26 (32) 1.77 (45) 1.42 (36) 1.89 (48) 2.50 (63.5) 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 0.43 (11) 0.55 (14) 0.81 (20.6) 1.06 (27) 0.16 (4) 0.24 (6) 0.31 (8) 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 1.81 (46) 2.87 (73) 3.46 (88) 2.56 (65) 3.82 (97) 4.61 (117) 0.83 (21) 1.12 (28.5) 1.75 (44.5) 3.54 (90) 4.47 (113.5) 5.91 (150) 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 2.17 (55) 2.76 (70) 3.35 (85) 0.24 lb. (110 g) 0.67 lb. (306 g) 1.54 lbs. (700 g) Series Supplied with latch plate These unique latch clamps are designed for enclosure applications where the clamps are perpendicular to the latches. R T D C S K P 40334, 344 Ø J L M Ø F GH40324 A B G 2 x Ø E Q H N Cross Ref. DESTACO GH GH GH Holding Capacity 500 lbs. (225 kg) 1,000 lbs. (450 kg) 2,000 lbs. (900 kg) A B C D Ø E Ø F G H Ø J K L M N P Q R S T Weight 0.56 (14.3) 0.81 (20.6) 1.06 (27) (25.4) 1.50 (38.1) 2.13 (54) 2.09 (53.3) 2.57 (65.4) 3.31 (84.1) 3.11 (79) 4.79 (122) 5.13 (130) 0.17 (4.4) 0.22 (5.6) 0.34 (8.7) 0.21 (5.3) 0.28 (7.1) 0.34 (8.7) 0.44 (11.1) 0.39 (17.5) 1.13 (28.6) 0.16 (4) 0.28 (7.1) 0.37 (9.5) 0.16 (4) 0.24 (6) 0.31 (7.9) 0.08 (2) 0.12 (3) 0.16 (4) 0.51 (13) (19.1) 1.25 (31.8) 1.02 (26) 1.31 (33.3) 1.87 (47.6) 0.19 (4.7) 0.34 (8.7) 0.50 (12.7) 2.76 (70) 4.21 (107) 5.91 (150) 0.87 (22) 1.10 (28) 1.44 (36.5) 1.04 (26.5) 1.59 (40.5) 2.28 (58) 3.09 (78.5) 4.37 (111) 6.06 (154) 1.22 (31) 1.63 (41.3) 0.25 lb. (113 g) 0.56 lb. (250 g) lbs. (60.3) (700 g)

38 LATCH TYPE TOGGLE CLAMPS 33 NEW 40324R, 40334R & 40344R NEW! SECURELOCK MODELS! This new model features a locking lever to securely lock the clamp in the closed position. Ideal for latching applications on molds, doors, lids, and access covers. T D R C S K P 40324R Ø J L M 4 x Ø F GH40334R GH40344R 2 x Ø E Q A H B G N Cross Ref. DESTACO Holding Capacity A B C D Ø E Ø F G H Ø J K L M N P Q R S T Weight GH40324R 324R 500 lbs. (225 kg) 0.56 (14.3) (25.4) 2.23 (56.7) 3.11 (79) 0.17 (4.4) 0.21 (5.3) 0.44 (11.1) 0.16 (4) 0.16 (4) 0.08 (2) 0.51 (13) 1.02 (26) 0.19 (4.7) 2.76 (70) 0.87 (22) 1.04 (26.5) 3.09 (78.5) 1.22 (31) 0.26 lb. (120 g) GH40334R 334R 1,000 lbs. (450 kg) 0.81 (20.6) 1.50 (38.1) 2.57 (65.4) 4.79 (122) 0.22 (5.6) 0.28 (7.1) 0.39 (17.5) 0.28 (7.1) 0.24 (6) 0.12 (3) (19.1) 1.31 (33.3) 0.34 (8.7) 4.21 (107) 1.10 (28) 1.59 (40.5) 4.37 (111) 1.63 (41.3) 0.7 lb. (320 g) GH40344R 344R 2,000 lbs. (900 kg) 1.06 (27) 2.13 (54) 3.31 (84.1) 5.13 (130) 0.34 (8.7) 0.34 (8.7) 1.13 (28.6) 0.37 (9.5) 0.31 (7.9) 0.16 (4) 1.25 (31.8) 1.87 (47.6) 0.50 (12.7) 5.91 (150) 1.44 (36.5) 2.28 (58) 6.06 (154) lbs. (60.3) (800 g)

39 LATCH TYPE TOGGLE CLAMPS 34 Series 451 These are the most popular latch clamps with adjustable single hook design. GH451 has a flanged base, while GH452 has a narrow base which is less tolerant to twisting motions. Stainless steel models are available. Optional Latch Plates are also available (38.1) 2 (50.8) GH452 Base Ø 0.26 (Ø 6.7) H K Ø J 4 x Ø A G GH452 F B C D E GH452LP (Sold Separately) Cross Ref.: DESTACO Description Holding Capacity GH Flanged Base 375 lbs. (170 kg) Ø A B C D E F G H Ø J K Weight 0.22 (5.6) 0.50 (12.7) 1.50 (38.1) 8.35 (212) 2.30 (58.3) 1.44 (36.5) 1.94 (49.2) 0.31 (8) 1.37 (34.9) 0.59 lb. (270 g) Optional Latch Plate GH451LP GH451SS 351SS Stainless Steel of GH451 GH451LPSS GH B Narrow Base 375 lbs. (170 kg) 0.26 (6.7) 1.50 (38.1) 2 (50.8) 8.31 (211) 1.76 (44.8) 1.44 (36.5) 0.31 (8) 0.56 lb. (255 g) GH452LP GH452SS 351BSS Stainless Steel of GH452 GH452LPSS GH Flanged Base GH Flanged Base 750 lbs. (340 kg) 1,000 lbs. (450 kg) 0.34 (8.7) 0.41 (10.3) 0.31 (7.9) 0.50 (12.7) 1.25 (31.8) 1.13 (28.6) 1.87 (47.6) 2.13 (54) (285) (336) 3.13 (79.4) 3 (76.2) 2.25 (57.3) 2.68 (68) 2.59 (65.7) 3.37 (85.7) 0.37 (9.5) 0.50 (12.7) 1.94 (49.2) 2.37 (60.3) 1.38 lbs. (624 g) 2.56 lbs. (1,130 g) GH40371LP GH43810LP Cross Ref.: DESTACO 301 Holding Capacity: 375 lbs. (170 kg) Weight: 0.68 lb. (310 g) Optional latch plate model GH43101LP 0.57 (14.4) 1.75 (44.4) 1.24 (31.6) GH (101.6) 4 x Ø 0.28 (4 x Ø 7.1) 0.50 (12.7) 1.63 (41) 0.40 (10) 1.89 (48) GH43101LP (Sold Separately) 0.13 (3.2) 1.37 (34.8) 8.17 (207.6)

40 LATCH TYPE TOGGLE CLAMPS & Holding Capacity: 375 lbs. (170 kg) Weight: 0.40 lb. (180 g) GH43110 supplied with M6 hook bolt GH43120 supplied with hex head spindle assembly (28) 0.71 (18) M6 GH43120 GH43110 GH (22) 0.10 (2.5) 0.47 (12) 0.83 (21) 0.79 (20) 2 x Ø 0.26 (2 x Ø 6.5) 1.38 (35) 3 (76.5) GH & Holding Capacity: 660 lbs. (300 kg) Weight: 0.85 lb. (385 g) GH43150 supplied with M10 hook bolt GH43160 supplied with hex head spindle assembly (36) 0.94 (24) 2 x Ø 0.33 (2 x Ø 8.5) M10 THD GH43160 GH43150 GH (23) 0.13 (3.2) GH (12) 0.94 (24) 1.57 (40) 4.53 (115)

41 TOGGLE PLIERS All Pliers are forged from alloy steel with stainless steel rivets for durability Cross Ref.: DESTACO 424 Holding Capacity: 200 lbs. (90 kg) Weight: 0.41 lb. (185 g) Supplied: GHSA14112 Ø 0.50 (Ø 12.7) 0.31 (8) 5.13 (130) (4) (6.4) 1.87 (47) (25.4) 1.90 (48) 1.13 (29) Ø 0.50 (Ø 13) 0.31 (8) 0.15 (4) 0.25 (6.4) Cross Ref.: DESTACO 441 Holding Capacity: 350 lbs. (159 kg) Weight: 0.64 lb. (290 g) Supplied: GHSA (10) 6.50 (165) (54) (32) 2.37 (60) 1.75 (44.5) Ø 0.69 (Ø 18) 0.43 (11) 0.50 (13) 0.37 (10) 0.19 (5) Cross Ref.: DESTACO 462 Holding Capacity: 700 lbs. (318 kg) Weight: 1.46 lbs. (660 g) Supplied: GHSF (70) 8.50 (216) 3 (76) 1.75 (44) 2.69 (68) Holding Capacity: 1,800 lbs. (820 kg) Weight: 1.56 lbs. (710 g) Supplied: GHSA /824 THD 1.25 (32) 0.63 (16) 7.37 (187) 3 (77) 1.77 (45) 2 (51)

42 TOGGLE PLIERS Holding Capacity: 200 lbs. (90 kg) Weight: 0.3 lb. (130 g) Supplied: GHSA14112 Ø 0.50 (Ø 13) 1.18 (30) 4.75 (121) 1.78 (45) 0.97 (25) 1.63 (41) Cross Ref.: DESTACO 463 Holding Capacity: 700 lbs. (318 kg) Weight: 1.63 lbs. (740 g) Supplied: GHSF38300 swivel foot and GHSA38300 hex head spindle assembly 0.69 (18) 0.43 (11) 2.75 (70) 0.50 (13) 8.50 (216) 0.19 (5) 0.37 (10) 4.25 (108) 3 (76) 2.69 (68)

43 CAM TYPE TOGGLE CLAMPS & Designed to hold workpiece with inconsistent height. Cam Action permits hold down material deviation of (3.2 mm) in height. Ideal for castings and forgings, etc. A B 4 x Ø L C GH60130 M J K G D H E F Holding Capacity Supplied Bar Opens Handle Opens A B C D E F G H J K Ø L M Weight GH lbs. (250 kg) GHSF º 165º 8.66 (220) 1.54 (39) 0.25 (6.5) 0.87 (22) 1.38 (35) 2.28 (58) 4.65 (118) 1.89 (48) 2.44 (62) 0.31 (8) 0.79 (20) 1.50 lbs. (680 g) GH lbs. (350 kg) GHSF º 170º (275) 0.87 (22) 2.36 (60) 0.35 (9) 1.18 (30) 1.89 (48) 3.94 (100) 7 (178) 2.24 (57) 3.03 (77) 0.35 (9) 0.98 (25) 3.51 lbs. (1,590 g)

44 HEAVY DUTY WELDABLE TOGGLE CLAMPS 39 These heavyduty clamps provide the strong, durable holding power to meet the requirements of the auto industry. These clamps are forged from alloy steel, hardened, and ground to close tolerance. Pins are also hardened and grounded. A separate handle is included with each clamp for welding in the desired position. Series 701 & 702 A A B B H G H G GH701C GH701D GH701K GH702C GH702D GH702K GH701C GH701D GH701K Holding Capacity 440 lbs. (200 kg) 1,100 lbs. (500 kg) 2,200 lbs. (1,000 kg) 440 lbs. (200 kg) 1,100 lbs. (500 kg) 2,200 lbs. (1,000 kg) J M Arm Opens E F C Handle Opens 194º 123º 191º 122º 197º 128º 194º 123º 191º 122º 197º 128º L D K Ø A B C D E F G H J K Ø L M Weight 0.68 (17.3) 0.85 (21.7) 1.07 (27.2) 0.68 (17.3) 0.85 (21.7) 1.07 (27.2) 6 (152.4) 1.96 (50) 2.69 (66.8) 3.15 (80) 0.94 (23.8) 1.33 (33.7) 1.46 (37.2) 0.57 (14.5) 4 (102) 4.84 (123) 1.89 (48) 2.72 (69) 3.30 (84) 0.31 (8) 0.51 (13) 0.63 (16) 0.31 (8) 0.51 (13) 0.63 (16) GH702C GH702D GH702K 1.25 (31.8) 1.65 (42) 1.81 (46) 1.25 (31.8) 1.65 (42) 1.81 (46) 1.57 (40) 1.92 (48.8) 2.09 (53) 1.57 (40) 1.92 (48.8) 2.09 (53) J M 0.67 (17) 0.97 (24.6) 0.98 (25) 0.67 (17) 0.97 (24.6) 0.98 (25) E F C 4.75 (121) 6.50 (165) 8.07 (205) 3.66 (93) 5.20 (132) 6.57 (167) L D 1.75 (44.5) 1.97 (50) 2.48 (63) 1.02 (26) 1.43 (36.4) 2.13 (54) K 1.10 (28) 1.54 (39) 2.05 (52) 1.10 (28) 1.54 (39) 2.05 (52) 2 (50.8) 1.32 lbs. (598 g) lbs. (70) (1,587 g) lbs. (90) (2,650 g) lbs. (50.8) (680 g) lbs. (70) (1,469 g) lbs. (90) (2,608 g) Series Cross Ref.: DESTACO GH M GH MB GH MLB GH M GH MB GH MLB GH M GH MB GH MLB Holding Capacity 1,100 lbs. (500 kg) 2,200 lbs. (1,000 kg) 4,400 lbs. (2,000 kg) Arm Opens Handle Opens 214º 134º 206º 130º 206º 130º GH70305 GH70505 GH70605 GH70310 GH70510 GH70610 A GH70315 GH70515 GH70615 Ø A B C D D1 E F G H K K1 L Weight GH70305 GH70310 GH70315 GH70505 GH70510 GH70515 GH70605 GH70610 GH (17.5) 0.87 (22.2) 1.06 (27) 4.9 (125) 0.19 (4.8) 0.19 (4.8) 0.25 (6.3) 0.79 (20) 1.97 (50) 1.10 (28) 2.50 (63.5) 1.30 (33) 3 (76) 1.97 (50) 2.50 (63.5) 3 (76) 0.39 (10) 0.48 (12.3) 0.63 (16) 1.25 (31.8) 1.59 (40.3) 1.91 (48.6) 1.57 (40) 2.24 (57) 2.93 (74.3) 0.59 (15) 1.02 (26) 1.30 (33) 1.14 (29) 1.50 (38) 2 (51) 1.77 (45) 2 (51) 2.50 (63.5) 1.68 lbs. (760 g) lbs. (51) (850 g) 2.07 lbs. (940 g) 2.93 lbs. (1,330 g) lbs. (73) (1,490 g) 3.51 lbs. (1,590 g) 5.62 lbs. (2,550 g) lbs. (91) (2,830 g) 6.50 lbs. (2,950 g) E F B L D D1 C H G K K1

45 HEAVY DUTY WELDABLE TOGGLE CLAMPS & 75027SM 4.37 (111) 8.46 (215) Cross Ref.: DESTACO 527 & 527F Holding Capacity: 1,000 lbs. (450 kg) Weight: 2.51 lbs. (1,140 g) Bar Opens: 195º Handle Moves: 65º 1.50 (38) (32) (57) 2.09 (53) GH75027 Ø 0.41 (Ø 10.3) Ø 0.69 (Ø 17.5) 6.61 (168) 8.46 (215) (32) (57) Ø 0.69 (Ø 17.5) GH75027SM 1.50 (38) 4.06 (103) Ø 0.41 (Ø 10.3) & Cross Ref.: DESTACO 548 & 578 G F E GH75048 Holding Capacity Arm Opens Handle Opens A B C D E F G Weight D GH ,500 lbs. (700 kg) 200º 110º 3.25 (82.6) 2.65 (67.2) 4.26 (108) (25.4) 9.92 (252) 2.20 (56) 5.95 lbs. (2,700 g) B GH ,500 lbs. (1,600 kg) 200º 110º 4 (101.6) 2.72 (69.2) 4.63 (117.5) 1.26 (32) (276) 2.57 (65.2) lbs. (22.2) (4,200 g) C A

46 FTYPE CLAMPS & 80325SS Cross Ref.: DESTACO 325 & 325SS Holding Capacity: 750 lbs. (340 kg) Weight: 1.10 lbs. (500 g) Handle Opens: 50º Jaw Opens: 90º Supplied Stainless Steel GH80325SS available 1.78 (45) 0.29 (7.5) (7.7) (12.5) 0.59 (31.8) 90º The bottom jaw is designed to be welded to container or cover. The forged jaw swings 90º for easy job loading. 1/213 Hex spindle supplied (6.4) 2 x Ø 0.26 (2 x Ø 6.7) 8.27 (210) 0.32 (8) 0.50 (13) 50º GH (8)

47 PNEUMATIC POWER CLAMPS 42 These fast acting air clamps use standard toggle clamps as the basic platform. 1/8 NPT port is standard. Maximum air pressure allowed in the cylinder is 140 PSI. GH10101A GH12050A GH12130A & GH12132A Specifications GH12265A & GH12275A GH10247A & GH10249A GH20820A Basic Holding Capacity Supplied Bar Opens Cylinder Bore Cylinder Stroke GH10101A GH101A 150 lbs. (68 kg) GHFC º 0.78 (20) 1.24 in² (31.4 mm²) GH12050A GH lbs. (90 kg) GHFC º 1.18 (30) 2.78 in² (70.7 mm²) GH12130A GH lbs. (160 kg) GHFC º 1.18 (30) 2.78 in² (70.7 mm²) GH12132A GH lbs. (160 kg) GHFC º 1.18 (30) 2.78 in² (70.7 mm²) GH12265A GH lbs. (272 kg) GHFC º 1.57 (40) 4.94 in² (125.6 mm²) GH12275A GH lbs. (272 kg) GHFC º 1.57 (40) 4.94 in² (125.6 mm²) GH10247A GH lbs. (364 kg) GHFC º 2 (50) 7.73 in² (196.3 mm²) GH10249A GH lbs. (364 kg) GHFC º 2 (50) 7.73 in² (196.3 mm²) GH20820A GH lbs. (160 kg) GHFC º 1.18 (30) 2.78 in² (31.4 mm²) Dimensions A B C Ø D E F G H GH10101A 0.94 (23.8) 0.20 (4.8) 0.63 (15.9) 0.13 (4.4) 1.60 (40.7) 0.69 (17.5) 0.94 (24) 6.63 (168.5) A GH12050A 1.06 (27) 0.25 (6.3) 0.50 (12.7) 0.20 (5.2) 2.19 (55.7) 1.06 (27) 1.38 (35) 7.28 (185) GH12130A 1.26 (32) 0.39 (10) 0.28 (7.1) 2.97 (75.4) 1.33 (33.8) 2.68 (68) 9.31 (236.5) B C GH12132A 1.26 (32) 0.39 (10) 0.28 (7.1) 2.97 (75.4) 1.35 (34.2) 3.47 (88.2) (260) 4Ø D GH12265A 1.78 (45.2) 0.37 (9.5) 1.25 (31.8) 0.33 (8.3) 3.69 (93.7) 1.75 (44.2) 3.47 (88.2) (392) GH12275A GH10247A GH10249A 1.78 (45.2) 1.78 (45.2) 1.78 (45.2) 0.37 (9.5) (31.8) 1.25 (31.8) 1.25 (31.8) 0.33 (8.3) 0.33 (8.3) 0.33 (8.3) 3.69 (93.7) 4.33 (110) 4.33 (110) 1.75 (44.2) 2.18 (55.3) 2.18 (55.3) 3.47 (88.2) 4.52 (114.8) 4.52 (114.8) (302) (407) (407) E F GH20820A 0.98 (25) 0.65 (17) 0.63 (16) 0.28 (7) 7.68 (195) 2.75 (70) 2.36 (60) 6.50 (165) G H

48 PNEUMATIC CLAMPS / YOKE ASSEMBLIES 43 GH36301A GH36003A GH36330A Specifications Dimensions GH36301A GH36003A Basic GH301A GH36003 GH36330A GH36330 Holding Capacity 100 lbs. (454 kg) 600 lbs. (273 kg) 2,500 lbs. (1,136 kg) Supplied GHSA08034 GHSA56200 GHSA38300 Cylinder Bore (20) 1.18 (30) 1.57 (40) Cylinder Stroke 1.24 in² (3.14 cm²) 2.78 in² (7.07 cm²) 4.94 in² (12.56 cm²) A B Ø C D E F G H J K GH36301A 0.63 (15.9) GH36003A 1.31 (33.3) GH36330A 1.63 (41.3) 0.25 (6.4) 0.44 (11.1) 0.63 (15.9) 0.17 (4.4) 0.22 (5.6) 0.34 (8.7) 1.27 (32.2) 2.28 (58) 2.03 (51.5) 1.57 (40) 2.74 (69.5) 3.30 (84) 0.63 (15.9) 1.44 (36.5) 1.37 (34.9) 1.63 (41.3) 0.47 (12) 0.78 (19.7) 0.54 (13.6) 1.09 (27.7) 7.36 (187) 9.84 (250) (30) (26.6) (347) Ø C A B H E J D F G K Yoke Assemblies Hold two workpieces, or long pieces of fabric or metal. The yokes have spring loaded, extrawide spindles that provide strong, nomar holding power that can be adjusted to accommodate varying material thicknesses and sizes. GHYP3145 Yoke attached to GH304E Clamp (Sold separately) GHYP3130 Yoke attached to GH20235 Clamp (Sold separately) GHYP3160 Yoke attached to GH12265 Clamp (Sold separately) A x 3/4 L Plastic Pad Part No. A L L GHYP3130 5/ (76.2) GHYP3145 5/ (114.3) 10º GHYP3160 5/ (152.4) GHYP3730 3/816 3 (76.2) 3.9 (99) GHYP3745 3/ (114.3) 5/1618 TYP GHYP3760 3/816 6 (152.4) 1.63 (41) Plastic Pad (Full Thread)

49 ACCESSORIES 44 Adjustable Assemblies Flat Cushion Tip Bonded Neoprene Cap Zincplated finish A Swivel Foot Adjustable Assemblies A Copperplated finish OAL OAL Part No. Thread OAL A GHFC /16 7/16 GHFC /420 17/8 1/2 GHFC /420 21/8 1/2 GHFC / /2 3/4 GHFC / /4 GHFC /816 31/2 1 GHFC /816 41/2 1 GHFC /213 33/4 1 Part No. Thread OAL A GHSF /420 21/4 3/8 GHSF / /4 3/8 GHSF / /8 GHSF / /16 GHSF / /16 GHSF / /2 Flanged Washers for UBar Clamps Zincplated finish Standard Adjustable Zincplated finish L Part No. Thread L GHSA /4 GHSA /8 GHSA /420 11/2 GHSA /420 13/4 GHSA / GHSA / /2 GHSA /816 3 GHSA /816 4 GHSA /213 3 GHSA /213 41/2 GHSA /811 5 Cone Cushion Tip Bonded Neoprene Cap Zincplated finish A Part No. GHFW080 GHFW100 GHFW140 GHFW516 GHFW380 GHFW120 GHFW580 Part No. GHNC140 GHNC516 GHNC380 GHNC120 Description For 8 spindle For 10 spindle For 1/4 spindle For 5/16 spindle For 3/8 spindle For 1/2 spindle For 5/8 spindle Neoprene Caps Slips on standard adjustable spindle heads. Description For 1/4 spindle For 5/16 spindle For 3/8 spindle For 1/2 spindle Bolt Retainers Zincplated finish OAL Part No. Thread OAL A GHCC /8 1/2 GHCC /420 13/4 3/4 GHCC /420 21/8 3/4 GHCC / /2 13/16 GHCC /816 31/2 1 Part No. GHBR140 GHBR516 GHBR380 GHBR120 GHBR580 Description For 1/4 spindle For 5/16 spindle For 3/8 spindle For 1/2 spindle For 5/8 spindle

50 APPENDIX 45 PART NO. PAGE PART NO. PAGE PART NO. PAGE PART NO. PAGE 101A 1 101AI 1 101AIT 1 101ASS 1 101AT 1 101B 4 101J 9 101JS 9 102B 4 106B 5 200W WH WL WLH A AI AL AR ASS B BHB BI BS BSI BSM BSS I L R SS F FL F FL G GB GBL GBLH GL WH WLH D DHB DI DSM DSS A B D F FSS EK C E H C E H LUB LUBSS R SS LP LPSS SS LP LPSS SS C D K C D K A A A B B SM A HB SM SS U UL A HB SS A A SS A B HB SM SS SM SS B SS A B B A SS A A LUB LUBSS R SS R R LUB LUBSS R SS R LP R LP LP LP SM SS BR BR BR BR BR CC CC CC CC CC FC FC FC FC FC FC FC FC FW FW FW FW FW FW FW NC NC NC NC SA SA SA SA SA SA SA SA SA SA SA SF SF SF SF SF SF YP YP YP YP YP YP

51 STRONG HAND TOOLS PRODUCT LINES 46 Strong Hand Tools Quick Acting Welding Clamps, Magnets, Pliers, and Vises allow you to create accurate fitups quickly, safely and efficiently. BuildPro Welding Tables Affordable, Modular Welding Tables with the plate + hole + slot system for complete flexibility in fixturing. Siegmund Welding Tables German made Welding Tables for heavy duty fixturing applications. (North America & Asia) Valtra Machine Parts Handwheels, handles, clamps, levers, and threaded fasteners for manufacturing, and MRO. Stock or custom. See many more problem solving StrongHandTools.com