Straight Line Action Clamps

Transcription

1 Straight Line Action Clamps Sizing and Application Chart Click Page # View N [lbf.] mm [inch] Series Page MC-SLA-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 5000 [675 to 1125] 5000 to 7000 [1125 to 1575] 7000 to [1575 to 2250] [2250+] 0 to 20 [0 to 0.79] 20 to 40 [0.79 to 1.57] 40 to 60 [1.57 to 2.36] 60 to 80 [2.36 to 3.15] 80 to 105 [3.15 to 4.13] MC-SLA-1

2 Camco MDE Series Heavy-Duty Indexers Introduction Overall Height mm [inch] Overall Length mm [inch] Overal Width mm [inch] Suitable Application Areas Standard Material Service Environment 0 to 40 [0 to 1.57] 40 to 60 [1.57 to 2.36] 60 to 80 [2.36 to 3.15] 80 to 100 [3.15 to 3.94] 100 to 120 [3.15 to 4.72] 120 to 140 [4.72 to 5.51] 60 to 80 [2.36 to 3.15] 80 to 120 [2.36 to 4.72] 120 to 160 [4.72 to 6.30] 160 to 200 [6.30 to 7.87] 200 to 240 [7.87 to 9.45] 240 to 280 [9.45 to 11.02] 280+ [11.02+] 0 to 30 [0 to 1.18] 30 to 45 [1.18 to 1.77] 45 to 60 [1.77 to 2.36] 60 to 75 [2.36 to 2.95] 75 to 90 [2.95 to 3.54] Welding Assembly Checking Fixtures Machining Woodworking Food Processing Duty Cycle Steel Stainless Steel Toggle Lock Plus Normal Harsh/Dirty V 3 3 V 3 3 V 3 3 V 3 3 V 3 3 V 3 3 V 3 3 V 3 3 V V V 3 3 V 3 V 3 3 V 3 3 V 3 3 V V V V V 3 V 3 3 V 3 3 V 3 3 V 3 3 V 3 3 Excellent/High Fair/Medium Poor/Low V Not Recommended MC-SLA-2

3 6001 Series Heavier duty version of 601 with 50% more holding capacity Mounting pattern interchangeable with 601 Allow handle to fall below mounting plane to lock in retracted position Assembly Testing Soldering Gluing M 6001-SS 6001-MSS Technical Information Capacities Dimensions HC EF AF 6001 EF:AF (pushing/ pulling) (Recommended) # M [150 lbf] [0.12lb] [0.63] M M 14:1/25: SS 670 N 0,05kg 16 # MSS M M Included No Yes HC =, EF = Exerting Force, AF = Applied Force THREAD M [0.43] 11 [0.37] 9,5 [0.19] Ø 4,8 [0.71] 18 [0.51] 13 [0.52] 13,2 [1.54] 39 [0.63] [1.23] 16 31,3 [0.63] 16 [0.85] 21,7 [1.27] 32,2 187,0 [0.33] 8,3 [0.71] 18 [0.50] 12,7 [0.28] Ø 7 [0.16] 4 [1.10] 27,9 [2.63] 66,9 [0.12] 3 [0.19] Ø 4,8 MC-SLA-3

4 601 Series Compact straight line action clamp Assembly Testing Soldering Gluing See page MC-ACC-1 for accessories M 601-O 601-SS Straight Base Stainless steel U-Bar 601-OSS Stainless steel External thread Technical Information Capacities Dimensions HC EF AF 601 EF:AF (pushing/ pulling) (Recommended) Included # Yes 601-M M M [100 lbf] [0.09lb] 440 N 0,04kg 14:1/25:1 [0.63] No 601-O 1/ SS # Yes 601-OSS 1/ No This item is available upon request HC =, EF = Exerting Force, AF = Applied Force [0.17] 4,3 [1.33] 33,8 [0.63] 16 [0.78] 19,8 [0.50] 12,7 [0.25] Ø6,4 [0.50] 12,7 [0.44] Ø11,1 [0.32] 8,1 185 [0.63] 16 [1.05] 26,7 [1.27] 32,1 THREAD M [1.28] 32,4 [2.61] 66,2 [0.09] 2,3 [0.56] 1/ ,2 601-O (EXTERNAL THREAD) [1.53] 38,8 MC-SLA-4

5 6015 Series Smallest of the solid base Straight Line Action clamps Compact design combined with high holding capacity Allow handle to fall below mounting plane to lock in retracted position Covered under one or more U.S./International Patents Assembly Checking fixtures Tensioning devices M 6015-SS, 6015-MSS Stainless Steel 6015-R, 6015-MR with DESTACO Toggle Lock Plus Technical Information Capacities HC EF AF EF:AF (pushing/ pulling) Recommended (Not Supplied) 6015 [560 lbf] 1/ M 2500 N M M 6015-SS [630 lbf] [0.35lb] [0.70] 1/ (supplied) 35: MSS 2800 N 0,15kg 17,8 M M (supplied) 6015-R [560 lbf] 1/ MR 2500 N M M HC =, EF = Exerting Force, AF = Applied Force MC-SLA-5

6 6015 Series Straight Line Action Clamps Dimensions -M/-SS/-MSS/-R/-MR M 6015-SS, 6015-MSS Stainless Steel 6015-R, 6015-MR with DESTACO Toggle Lock Plus THREAD M [0.22] Ø 5,5 [1.26] 32 [0.25] 6,4 [1.75] 44,5 [2.25] 57,2 [0.87] 22,2 DESTACO TOGGLE LOCK PLUS OPTION 6015-R / 6015-MR (Engages in extended position only) 184 [0.50] 12,7 [1.59] 40,5 [0.20] 5,1 [0.39] Ø 10 [0.71] 17,9 [2.96] 75,1 MC-SLA-6

7 603, 608 Series Allow handle to rotate and fall below mounting plane to lock in retracted position Large holding capacities for their size Available with DESTACO Toggle Lock Plus Covered under one or more U.S./International Patents Assembly & test Checking fixtures Welding fixtures Tensioning devices 803 Pneumatic Toggle Clamp See page MC-PTC ME Pneumatic Toggle Clamp See page MC-PTC M 603-SS 603-MSS Stainless Steel 603-R 603-MR with DESTACO Toggle Lock Plus M Technical Information Capacities AF HC EF EF:AF (pushing/ pulling) Recommended (Not Supplied) 603 [600 lbf] 5/ M 2670 N M M 603-SS [840 lbf] [0.83lb] [1.25] 5/ :1/34:1 603-MSS 3740 N 0,38kg 31,8 M M (supplied) 603-R [600 lbf] 5/ MR 2670 N M M 608 [850 lbf] [1.25lb] [1.63] 3/ :1/50:1 608-M 3780 N 0,57kg 41,3 M M HC =, EF = Exerting Force, AF = Applied Force MC-SLA-7

8 603, 608 Series Straight Line Action Clamps Dimensions -M/-SS/-MSS/-R/-MR M 603-SS 603-MSS Stainless Steel 603-R 603-MR with DESTACO Toggle Lock Plus M DESTACO TOGGLE LOCK PLUS OPTION (Engages in extended position only) 190º H THREAD M C1 C2 L3 L2 A6 A5 L A1 A3 A Ø D1 B B1 Ø D A A1 A3 A5 A6 B B1 C1 C2 D D1 H L L2 L3 603 [2.17] [0.34] [0.51] [0.82] [0.19] [0.44] [3.43] [4.77] 603-M 55 8, ,8 11, ,2 603-SS [1.44] [0.54] [0.65] [1.31] [1.88] [0.97] [0.25] [0.27] [0.47] [3.28] [4.69] [1.28] [1.00] 603-MSS 36,6 [2.20] [0.30] 13,6 16,5 33, ,6 6,4 6, ,4 119,2 32,5 25,4 603-R 55,9 7,5 [0.51] [0.82] [0.44] [3.43] [4.77] 603-MR [0.19] 11, , M [1.63] 41,4 [2.25] 57,2 [0.31] 8 [0.75] 19 [1.40] 36 [1.63] 41,4 [2.25] 57,2 [1.25] 31,8 4,8 [0.33] 8,4 [0.62] 15,8 [4.04] 102,6 [6.00] 152,3 [1.59] 40,5 [1.25] 31,8 MC-SLA-8

9 605 Series For push/pull clamping Allow handle to rotate and fall below mounting plane to lock in retracted position Assembly & test Woodworking Tensioning devices Reverse action version 615/615-M M Technical Information Capacities Dimensions HC EF AF EF:AF (pushing/ pulling) Recommended (Not Supplied) 605 [300 lbf] [0.69lb] 1330 N 0,31kg 45:1/40:1 [1.25] 5/ M 31,8 M M HC =, EF = Exerting Force, AF = Applied Force [1.47] 37,3 [.97] 24,6 [1.25] 31,8 THREAD M [3.29] 83,5 [1.00] 25,4 THREAD [1.94] 49,4 [.08] 2,1 [.12] 3.1 [5.47] 139 [Ø.44] Ø11,1 [Ø.22] Ø5,6 [1.63] 41,3 [2.19] 55,6 [.28] 7,1 [1.38] 34,9 [3.41] 86,5 MC-SLA-9

10 606 Series Handle and linkage swivel 125 for mounting flexibility Narrow base for tight spaces locks in extended position only Assembly & test Woodworking Tensioning devices M Mounting configuration: Bottom Mount Side Mount Technical Information Capacities Dimensions HC EF AF EF:AF (pushing) Recommended (Not Supplied) 606 [450 lbf] [0.81lb] 40 5/ :1 606-M 2000 N 0,37kg [1.57] M M HC =, EF = Exerting Force, AF = Applied Force [0.44] Ø11,1 [1.00] 25,4 125 [2.42] 61,5 [1.45] 36,7 [1.00] Ø25.4 THREAD M [0.88] 22,4 [2.26] 57,3 [0.69] 17,4 [1.07] 27,1 [0.44] [6.72] Ø11,1 170,8 [1.25] 31,8 [1.25] 31,8 [0.19] 4,7 [0.20] Ø5,1 [0.63] 16 [1.13] 28,7 MC-SLA-10

11 607 Series Low profile and high holding capacity for its size Available with round or square plunger to resist torsional loads Allow handle to rotate and fall below mounting plane to lock in retracted position Assembly & test Welding Tensioning devices M 607-SQ 607-SQM with Square Technical Information Capacities Dimensions AF EF:AF (pushing/ pulling) Recommended (Not Supplied) HC EF 607 5/ M [800 lbf] [1.63lb] 3560 N 0,74kg 37:1/64:1 [1.63] M M 607-SQ 41,4 5/ SQM M M HC =, EF = Exerting Force, AF = Applied Force 607-SQ 607-SQM [0.50] 12,6 189 [3.52] 89,3 [0.69] 17,5 [1.00] 25,4 [0.20] [1.76] 5 44,8 [6.02] 152,8 [0.51] Ø 13 THREAD M [1.63] [2.20] 41,5 56 [0.63] 16 [1.38] 35 [3.01] 76,5 [4.25] 108 [0.28] Ø 7,2 MC-SLA-11

12 609 Series Low profile and high holding capacity for its size Flanged or straight base Allow handle to rotate and fall below mounting plane to lock in retracted position Assembly & test Welding Tensioning devices 609 Flanged Base 609-B Straight Base Technical Information Capacities Dimensions AF EF:AF (pushing/ pulling) Recommended (Not Supplied) HC EF 609 [300 lbf] 609-B 1330 N [0.88lb] 0,40kg 36:1/47:1 [1.25] 31,8 5/ HC =, EF = Exerting Force, AF = Applied Force [3.17] 80,4 200 [0.97] 24,6 [0.12] 3,1 [0.24] 6,2 [1.00] 25,4 THREAD [1.88] M 47,6 [0.44] Ø 11,1 [0.28] 7,2 [0.28] 7,1 [1.38] 35,1 [5.46] 138,6 [1.38] 35,1 [3.58] 90,9 [1.62] [2.19] 41,2 55,6 [0.28] 7,1 [0.27] Ø 6,8 MC-SLA-12

13 610 Series For push/pull clamping Allow handle to rotate and fall below mounting plane to lock in retracted position Assembly & test Woodworking Tensioning devices M Technical Information Capacities Dimensions AF EF:AF (pushing/ pulling) Recommended (Not Supplied) HC EF 610 [800 lbf] [1.69lb] 3560 N 0,77kg 51:1/70:1 [1.63] 3/ M 41,4 M M HC =, EF = Exerting Force, AF = Applied Force [4.41] 112 [1.25] 31,8 182 [1.70] 43,3 [Ø0.62] Ø15,8 [0.25] 6,3 THREAD M [1.94] 49,3 [1.91] 48,4 [6.72] 170,7 [Ø0.34] Ø8,7 [1.62] 41,2 [2.25] 57,2 [0.31] 7,9 [1.62] 41,3 mm [2.25] 57,2 MC-SLA-13

14 615 Series Reverse handle action. locks in the extended position only as the handle is moved downward Assembly & test Woodworking Tensioning devices 615 Technical Information Capacities Dimensions Recommended (Not Supplied) 615 [300 lbf] 1330 N [0.69lb] 0,31kg [0.97] 24,6 5/ [1.47] 37,3 [0.97] 24,6 THREAD M [1.00] 25,4 [0.10] 2,5 [0.12] 3,1 [2.29] 58 [0.44] Ø 11,1 [1.75] 44,6 [3.53] 89,7 [8.53] 216,6 [1.63] [2.19] 41,3 55,6 [0.28] 7,1 [0.22] Ø 5,6 [1.38] 34,9 MC-SLA-14

15 620 Series Reverse handle action locks in the extended position only as the handle is moved downward Assembly & test Woodworking Tensioning devices M Technical Information Capacities Dimensions HC EF AF EF:AF (pushing/ pulling) Recommended (Not Supplied) 620 [600 lbf] [1.50lb] [1.11] 3/ :1 620-M 2670 N 0,68kg 28,2 M M HC =, EF = Exerting Force, AF = Applied Force [0.62] Ø 15,8 THREAD M 101 [2.25] 57,1 [1.70] 43,3 [0.25] 6,3 [1.00] 25,4 [1.73] 43,9 [1.84] 46,8 [11.63] [1.63] 295,5 41,3 [0.31] 7,9 [0.38] Ø 9,5 [2.25] 57,2 [2.25] 57,2 [1.63] 41,3 MC-SLA-15

16 630 Series For push/pull clamping Allow handle to rotate and fall below mounting plane to lock in retracted position Available with DESTACO Toggle Lock Plus Assembly & test Welding Tensioning devices 830, 830-ME Pneumatic Toggle Clamp (See page MC-PTC-27) M 630-R 630-MR with DESTACO Toggle Lock Plus Technical Information Capacities Dimensions AF EF:AF (pushing/ pulling) Recommended (Not Supplied) HC EF 630 3/ M [2,500 lbf] [1.90lb] N 0,89kg 36:1/23:1 [2.00] M M 630-R 50,8 3/ MR M M HC =, EF = Exerting Force, AF = Applied Force [3.05] 77,6 DESTACO TOGGLE LOCK PLUS OPTION (Engages in extended position only) 187 [0.81] 20,6 [0.18] 4,4 [2.03] 51,5 [7.06] 179,2 [0.50] 12,7 [3.00] 76,2 [0.34] Ø 8,6 630, 630-R, 630-MR 630-M [0.62] Ø 15,8 [0.63] Ø 16 [1.25] 31,8 [1.38] 35,1 [1.63] 41,4 [2.25] 57,2 THREAD M [5.03] 127,8 MC-SLA-16

17 640 Series For heavy duty push/pull clamping Longest stroke of our Straight Line Action Clamps Allow handle to rotate and fall below mounting plane to lock in retracted position Available with DESTACO Toggle Lock Plus Assembly & test Welding Tensioning devices M 640-R 640-MR with DESTACO Toggle Lock Plus Technical Information Capacities Dimensions AF EF:AF (pushing) Recommended (Not Supplied) HC EF 640 1/ M [7,500 lbf] [6.78lb] [4.00] M M 35:1 640-R N 3,08kg 101,6 1/ MR M M HC =, EF = Exerting Force, AF = Applied Force THREAD (SEE CHART) [0.41] Ø10,4 [0.87] Ø22,2 [1.50] 38,1* [2.13] 54,1 [3.00] 76,2 [0.69] 17,5 [3.56] 90,4 [12.65] 321,4 [7.12] 180,8 [8.53] 216,7 [0.93] 23,5* Extended (640-R shown) [1.25] 31,8 [4.00] 101,6 [2.00] 50,8 [4.12] 104,8 [1.18] 30,0* DESTACO TOGGLE LOCK PLUS OPTION [4.28] 108,7 [0.38] 9,7 (*) Dimesions above in RED applies to the 640-R/640-MR only Retracted (640-R shown) MC-SLA-17

18 650 Series For heavy duty push/pull clamping Largest of our Straight Line Action Clamps Forged steel base and handle Allow handle to rotate and fall below mounting plane to lock in retracted position Assembly Welding Staking, light presswork Tensioning devices M Technical Information Capacities Dimensions AF EF:AF (pushing) Recommended (Not Supplied) HC EF 650 [16,000 lbf] [5.69lb] [3.00] 5/ :1 650-M N 2,58kg 76,6 M M HC =, EF = Exerting Force, AF = Applied Force THREAD M [2.25] 57,2 [2.00] 50,8 185 [4.84] 122,9 [0.99] Ø 25,2 [3.35] 85,1 [2.88] [2.75] 73,2 69,9 [0.25] 6,4 [7.81] 198,4 [11.16] 283,5 [1.38] 35,1 [2.25] [3.25] 57,2 82,6 [0.41] Ø 10,5 MC-SLA-18

19 95030, 95040, 95050, Series Low profile with high holding capacities Cast steel base and handle Allow handle to rotate and fall below mounting plane to lock in retracted position Assembly Testing Tensioning devices Technical Information Capacities C1 THREAD M ØD1 L A1 B B1 C2 H [550 lbf] 2450 N [1100 lbf] 4900 N [1650 lbf] 7340 N [3960 lbf] N [0.80lb] 2,58kg [1.60lb] 0,73kg [2.10lb] 0,95kg [6.4lb] 2,9kg [0.98] 24,9 [1.50] 38,1 [1.97] 50 [2.36] 60 Recommended (Not Supplied) M M M M M M L3 THREAD DEPTH A A3 A ØD This item is available upon request HC =, EF = Exerting Force, AF = Applied Force Part No. A A1 A3 B B1 C1 C2 ØD ØD1 H L L [0.98] 35 [1.38] 45 [1.77] 56 [2.20] 77 [3.03] 109 [4.29] [5.45] 167 [6.57] This item is available upon request 4.4 [0.17] 7.9 [0.31] 8.7 [0.34] 10.2 [0.40] 25 [0.98] 35 [1.38] 45 [1.77] 55 [2.17] 35.9 [1.41] 50.7 [2.00] 66 [2.60] 77 [3.03] 7.5 [0.30] 10 [0.39] 14 [0.55] 16 [0.63] 12.2 [0.48] 18.3 [0.72] 23.8 [0.94] 27.4 [1.08] 5.5 [0.22] 6.5 [0.26] 8.5 [0.33] 10.5 [0.41] 10 [0.39] 14 [0.55] 19 [0.75] 22 [0.87] 56 [2.20] 77 [3.03] 78 [3.07] 92 [3.62] 105 [4.13] [5.87] [7.47] 229 [9.02] 25 [0.98] 65 [2.56] 60 [2.36] 78.8 [3.10] MC-SLA-19

20 Straight Line Action Clamps Notes MC-SLA-20

21 5130, 5131, 5133 Series Heavy-Duty Reverse action allows the handle to stay out of the work zone Hardened steel pivot pins and bushings provide long life Black oxide finish with hardened plungers DESTACO Toggle Lock Plus versions available Welding fixtures Assembly fixtures Light machining 5130/-M 5131/-M 5133/-M Flanged Base 5130-B/-MB 5131-B/-MB 5133-B/-MB Solid Base 5130-R/-MR 5131-R/-MR 5133-R/-MR Flanged Base with DESTACO Toggle Lock Plus 5130-BR /-MBR 5131-BR /-MBR 5133-BR /-MBR Solid Base with DESTACO Toggle Lock Plus mm[in.] Handle Opening Recommended (not supplied) 5131 [1.12lbs] 5/ M 0,51kg M M 5131-B [0.85lbs] 5/ MB [2500lbf.] 0,39kg [1.00] M M R 11120N [1.15lbs] 25,4 5/ MR 0,52kg M M 5131-BR [0.88lbs] 5/ MBR 0,40kg M M 5130 [2.87lbs] 1/ M 1,30kg M M 5130-B [2.40lbs] 1/ MB [5800lbf.] 1,09kg [1.75] M M R 25800N [3.03lbs] 44,5 1/ MR 1,37kg M M 5130-BR [2.56lbs] 1/ MBR 1,16kg M M 5133 [3.12lbs] 1/ M 1,41kg M M 5133-B [2.65lbs] 1/ MB [4600lbf.] 1,20kg [3.13] M M R 20460N [3.36lbs] 79,5 1/ MR 1,52kg M M 5133-BR [2.89lbs] 1/ MBR 1,31kg M M This item is available upon request MC-SLA-21

22 5130, 5131, 5133 Series Heavy-Duty Straight Line Action Clamps Dimensions B3 HANDLE OPENING DESTACO TOGGLE LOCK PLUS OPTION (Engages in extended position only) C1 C B2 B2 H1 H L2 L1 L B1 B ØD1 THREAD "M" A3 A A1 ØD A A1 A3 B B1 B2 B3 C D D1 H L L1 L M R [1.13] [1.73] [0.30] [1.87] [2.52] 18.5 [1.14] [1.10] [0.34] [0.51] [2.49] [7.61] [3.27] [1.15] 5131-MR 5130 [0.73] 5130-M 5130-R 44.5 [1.75] 64 [2.52] 9.8 [0.38] 58.7 [2.31] 76 [2.99] MR [1.07] M R [1.75] [2.52] [0.38] [2.31] [2.99] MR [1.24] B2 B3 C1 D1 H B MB 5131-BR MBR 5130-B 5130-MB [0.49] BR MBR [0.84] 5133-B 5133-MB BR MBR [1.00] 29 [1.14] 40 [1.57] 39 [1.54] This item is available upon request 22 [0.87] 29 [1.14] 29 [1.14] 13 [0.51] 19 [0.75] 19 [0.75] 57.1 [2.25] 86.3 [3.40] 91.5 [3.60] 40 [1.57] 39 [1.54] 35 [1.38] 35 [1.38] 10.5 [0.41] 10.5 [0.41] 19 [0.75] 19 [0.75] 92.3 [ [3.84] 283 [11.14] [13.05] 132 [5.20] 167 [6.58] 49.7 [1.96] 82.2 [3.24] MC-SLA-22

23 5150 Series Heavy-Duty Square plunger provides positive radial location Reverse action allows the handle to stay out of the work zone Hardened steel pivot pins and bushings provide long life Black oxide finish with hardened plungers Welding fixtures Assembly fixtures Light machining 5150/5150-M Flanged Base 5150-B/5150-MB Solid Base 5150-R/5150-MR Flanged Base with DESTACO Toggle Lock Plus 5150-BR /5150-MBR Solid Base with DESTACO Toggle Lock Plus Technical Information mm[in.] Handle Opening Recommended (not supplied) 5150 [3.00lbs] 1/ M 1,36kg M M 5150-B [2.50lbs] 1/ MB [5800lbf.] 1,13kg [1.91] M M R 25800N [3.15lbs] / MR 1,43kg M M 5150-BR [2.68lbs] 1/ MBR 1,22kg M M This item is available upon request MC-SLA-23

24 5150 Series Heavy-Duty B3 HANDLE OPENING DESTACO TOGGLE LOCK PLUS OPTION (Engages in extended position only) H1 H C1 C B2 B2 L2 L1 L B1 B D1 THREAD "M" A3 A A1 ØD A A1 A3 B B1 B2 B3 C C1 D D M [1.75] [2.52] [0.38] [2.31] [2.99] [1.57] [0.41] B MB 40 [1.14] R 44.5 [1.57] [0.75] 5150-MR 5150-BR 5150-MBR [1.75] 64 [2.52] 9.8 [0.38] 58.7 [2.31] 76 [2.99] [1.07] 21.2 [0.84] H H1 L L1 L2 M / M [3.63] M B / MB [3.40] M R 92.3 [11.23] [2.86] [1.96] 1/ MR [3.63] M BR / MBR [3.40] M12 This item is available upon request 35 [1.57] [1.14] 10.5 [0.41] - MC-SLA-24

25 602, 604, 624 Series Versatile and compact straight line action clamps ed body for through hole mounting -SS models are stainless steel Assembly Checking fixtures Welding fixtures Tensioning devices SS 602-MM 602-MMSS SS 604-MM 604-MMSS SS 624-MM Technical Information Capacities Dimensions HC EF AF EF:AF (pushing/ pulling) (Recommended) Mounting Nut (Supplied) / SS [200 lbf] [0.12lb] [0.75] :1/28:1 602-MM 900 N 0,05kg M M M6 602-MMSS M M SS 604-MM 604-MMSS [300 lbf] 1330 N [400 lbf] 1780 N [300 lbf] 1330 N [400 lbf] 1780 N [0.44lb] 0,20kg 45:1/26:1 [1.50] 38 5/16-18 M M M (included) M SS [700 lbf] 3110 N [1.63lb] 0,74kg 49:1/21:1 [2.63] 66 3/ (included) MM M M M This item is available upon request HC =, EF = Exerting Force, AF = Applied Force MC-SLA-25

26 602, 604, 624 Series Straight Line Action Clamps Dimensions -SS/-MM/-MMSS SS 602-MM 602-MMSS SS 604-MM 604-MMSS SS 624-MM B2 ØD1 M2 C1 M1 M L3 L1 L2 H L4 M1 L SW JAM NUT (included) no. B2 C1ØD1 H L L1 L2 L3 L4 M1 M2 SW 602 [0.39] 10 [0.88] 5/ SS [1.04] [0.37] [0.37] 9,5 22,2 [3.13] [2.43] [1.31] [0.50] [0.63] [0.25] [0.75] 602-MM 26,3 9, ,7 33,3 12,7 16 6,4 19 [0.39] [0.87] M16x MMSS SS 604-MM 604-MMSS SS 624-MM [1.30] 33 [1.81] 46 [0.44] 11 [0.75] 19 [0.44] 11 [0.62] 16 [4.16] 106 [5.60] 142 [4.27] 108,5 [6.68] 170 [2.18] 55 [3.62] 92 [0.63] 16 [0.88] 22 [1.00] 25 [1.25] 32 [0.25] 6 3/4-16 M20x M27x2 [0.88] 22 [1.25] 32 [1.00] 25,4 [1.18] 30 [1.50] 38,1 [1.61] 41 MC-SLA-26

27 6004 Series Similar in size to 604, with a solid body 50% more holding capacity than 604 May be mounted through a hole or in a tapped hole. Locks over center in the extended and retracted position Covered under one or more U.S./International Patents Assembly Checking fixtures Welding fixtures Tensioning devices MM 6004-R 6004-MMR with DESTACO Toggle Lock Plus Technical Information Capacities Dimensions HC EF EF:AF (pushing) (Recommended) Mounting Nut (Supplied) AF 6004 [0.81lb] 5/ MM 0,37kg [450 lbf] 38 M M M 14.4: R 2000 N [1.50] [0.89lb] 5/ MMR 0,40kg M M M HC =, EF = Exerting Force, AF = Applied Force [.88] 22,2 Ø[.50] Ø12, / MM M20X1,5 [.75] 19,1 [.13] 3,2 [2.81] 71,4 [1.00] 25,4 [1.84] 46,8 DESTACO TOGGLE LOCK PLUS OPTION 6004-R / 6004-MMR ,4 [1.00] 6004-MM - 30,0 [1,18] MC-SLA-27 THREAD M [1.00] 25,4 [1.35] 34,2 [.25] 6,4 [5.52] 140,1 [4.21] 107

28 602, 604, 624, 6004 Series Straight Line Action Clamps Mounting Plates Mounting accessories for ed Body Straight Line Action Clamps M , M M M ød1 ød ød1 C2 ød ød1 C1 A6 A4 A5 C2 B1 B ød A3 A3 A6 A A1 A A1 A6 A5 C1 A5 B1 B ød B1 B ød C2 A3 A1 Item Number M M M For Use With A A1 A3 A4 A5 A6 B B1 C1 C2 D D MM [0.75] 604-MM 19, MM MM [1.25] 31,8 [1.57] 40 [1.60] 40,6 [2.20] 56 [0.87] 22 [0.55] 14 [0.63] [1.25] 31,8 [1.57] 40 [2.05] 52,1 [2.44] 62 [0.94] 24 [0.50] 12,7 [0.83] 21 [1.57] 40 [1.62] 41,1 [1.78] 45,2 [2.36] 60 [2.80] 71,1 [2.99] [1.30] 33 [1.46] 37 [0.20] 5 [0.19] 4,7 [0.20] 5 [0.25] 6,3 [0.22] 5,6 [0.33] 8,5 [0.65] 16,5 [0.75] 19,1 [0.81] 20,5 [1.08] 27,5 MC-SLA-28

29 614 Series Single hole threaded mount or side mount Precision hardened and ground plunger is designed for anti-rotation under torsional loads Locks in the extended or retracted position, internal locking in the push direction Assembly Checking fixtures Locaters and positioners 614-M Technical Information Capacities Dimensions Mounting Nut (Supplied) 614-M [1125 lbf] 5000 N [1.81lb] 0,82kg [1.26] 32 M [0.63] 16,0 [0.16] [0.47] 4,0 12,0 [0.94] H7 [0.35] 24,0 Ø 9,0 h7 [0.47] + [0.002] 0,04 Ø 12,0 + [0.001] 0,03 M8X1.25 [0.22] Ø 5,5 M24X1.5 [0.31] 8,0 [6.00] [0.98] 152,4 Ø 25,0 f7 [1.42] 36,0 [0.39] 10,0 f7 [1.38] 35,0 [0.69] 17,5 [1.29] 32,7 [0.75] 19,0 [0.20] 5,0 [3.66] 93,0 MC-SLA-29

30 Straight Line Action Clamps Notes MC-SLA-30

31 670, 675, 690, 695 Series Precision clamping for high production Adjustable collet-type bushing minimizes radial plunger movement has a flat surface for anti rotation Pre-load nut and hold open device included Assembly Welding 670-1MBPLS 675-1MBPLS 690-1MBPLS 695-1MBPLS Series 670, 675, 690, 695 Technical Information Capacities 670-1MBPLS 675-1MBPLS [2400 lbf] N [4.2lb] 1,91kg [4.0lb] 1,81kg [2.25] 57,2 [1.10] 28 M MBPLS 695-1MBPLS [5000 lbf] N [8.2lb] 3,72kg [7.2lb] 3,27kg [3.00] 76,2 [1.50] 38,1 M16 This item is available upon request The unique feature of these clamps is the collet-type bushing that can be adjusted to eliminate plunger end movement after long repeated use. The plunger also has a flat which prevents lateral movement and allows offset piloting and holding. The plunger is drilled and tapped for threaded spindles or custom fixturing. The adjustable pre-load nut (PL) can be used to lock the clamp against itself when not under pressure and therefore prevent opening when mounted vertically. The spring hold-open device (S) prevents the clamp from accidentally closing. The mounting base (B) is supplied disassembled with the four models, to enable welding the base and the main assembly in any handle position. Series 675 and 695 (shorter stroke) reach the over-center position only when clamping. Series 670 and 690 (longer stroke) lock in both the extended and retracted position. L3 Welding range L 3 axial 0-8mm [0-0.31in.] Welding range radial 360 MC-SLA-31

32 670, 675, 690, 695 Series ØD2 L5 A ØD ØD3 Straight Line Action Clamps Dimensions L4 DETAIL A ØD1 B2 A A1 B3 B B1 ØD1 B4 VIEW B H THREAD B L1 L3 675 HANDLE POSITION C2 C1 L2 L MODEL 670/ HANDLE POSITION ØD ØD3 ØD1 B3 B B1 ØD1 B2 A A1 B4 VIEW B C2 C1 H THREAD B L4 L1 L3 L2 L MODEL 690/ HANDLE POSITION 690 HANDLE POSITION A A1 B B1 B2 B3 B4 C1 C2 D D1 D2H7 D MBPLS 675-1MBPLS [1.18] 30 [2.24] 57 [2.60] 66 [3.50] 89 [1.75] 44,5 [1.38] 35 [0.68] 17,3 [1.37] 34,8 [0.50] 12,7 [0.33] 8,4 [0.75] 19 [0.51] 13 [0.31] 7, MBPLS 695-1MBPLS [1.97] 50 [3.00] 76,2 [3.23] 82 [4.00] 101,6 [2.25] 57,2 [1.75] 44,4 [0.93] 23,7 [1.63] 41,3 [0.50] 12,7 [0.41] 10,5 [1.00] 25,4 -- [0.39] 9,8 H L L1 L2 L3 L4 L MBPLS 675-1MBPLS 690-1MBPLS 695-1MBPLS [8.11] 206 [6.37] 162 [10.55] 268 [7.68] 195 [13.31] 338 [9.45] 240 [2.97] 75,5 [0.25] [1.74] 6,4 44,4 [3.69] 93,7 [0.50] [2.25] 12,7 57,2 [0-0.31] 0-8 [0-0.31] 0-8 [1.38] 35 [0.98] 25 [0.41] 10,3 -- MC-SLA-32