MULTI-SPINDLE HEADS PLEASE NOTE
|
|
- William Dennis
- 5 years ago
- Views:
Transcription
1 MULTI-SPINDLE HEDS
2 MULTI-SPINDLE HEDS head is information on the range of multi-spindle heads available from E2. Multi-spindle heads enable tools to be closer together than with separate units, and all holes can be worked simultaneously without having to control numerous units. Most hole patterns are symmetrical and therefore ideal for using adjustable multi-spindle heads. It is also often possible to produce non-symmetrical patterns using these. E2 offers assistance in checking the feasibility of using an adjustable head. djustable multi-spindle heads can be divided into the following four basic types: 2-spindle heads 3-spindle heads (centre spindle fixed) 3-spindle heads (all spindles adjustable) 4-spindle heads When adjustable heads aren t suitable for the pattern to be produced or don t have enough spindles, special heads with fixed spindles can be used. These heads also offer extra precision and high repeatability for operations. ll E2 units suitable for adjustable multi-spindle heads can also be fitted with fixed heads. For more information or a quote, contact E2. PLESE NOTE that multi-spindle heads reduce the idling speed as well as the speed and torque at maximum output for all units with pneumatic spindle drive. The effect on idling speed ranges from -% for a small 2-spindle head on a low speed E33 to -30% for a large 3 or 4-spindle head on a high speed E. This has been taken into account in the Guidelines in each unit s details. when tapping with the EG 4 or EG you need length compensation on all spindles. This can be achieved by using collets with float compensation or tapping spindles. See Tool Holders (page 2) for more information.
3 MULTI-SPINDLE HEDS DIMENSIONS FOR E2 MULTISPINDLE HEDS This first section, with information on E2 s range of multi-spindle heads, is followed by a section showing specifications of feasible head and unit combinations for drilling and tapping. Other combinations are possible for special applications like counterpatterns according to costomer specification. Please contact E2 sinking, reaming, etc, as well as heads with fixed spindles in for further information. The collets needed for the tool holders on E2 s multi-spindle heads are described in more detail in Tool Holders (page 1). 2-SPINDLE HEDS D Specifications MX PITY IN STEEL OLLETS FOR OLLET MX SPEED DRILLING Ø TPPING MX Ø TYPE [M-threads] [rpm] MKV2 * VH 042P MKV2 MKV02 VH 02P MKV02 VH 02P MKV1002 VH 102P MKV02 MKV02 VH 2P VH 12D M3 M3 M M M M M M ER ER TR1 ER TR * Gear ratio 1:2. ll others 1:1 WEIGHT EXL. DPTOR [kg] D MIN SPINDLE SPING MX SPINDLE SPING SHORTER SIDE LONGER SIDE MKV2 * VH 042P MKV2 MKV02 VH 02P MKV02 VH 02P MKV-1002 VH 102P MKV02 MKV02 VH 2P VH 12D
4 3-SPINDLE HEDS (centre spindle fixed) D Specifications VH 043LP MKVR3 MKVR03 VH 03LP MKVR03 VH 03LP VH 103LP MKVR03 MKVR03 VH 3LP VH 13LD MX PITY IN STEEL OLLETS FOR OLLET MX SPEED DRILLING Ø TPPING MX Ø TYPE [M-threads] [rpm] 7 10 M3 M M M M M. 1 ER ER TR1 ER TR WEIGHT EXL. DPTOR [kg] D MIN SPINDLE SPING MX SPINDLE SPING SHORTER SIDE LONGER SIDE VH 043LP MKVR3 MKVR 03 VH 03LP MKVR 03 VH 03LP VH 103LP MKVR 03 MKVR03 VH 3LP VH 13LD ø On you can find more information as well as the same information as above in imperial units. When requesting a quote or ordering, please state: Model and ollet size. 43
5 3-SPINDLE HEDS Specifications VH 043P MKV3 MKV03 VH 03P MKV03 VH 03P VH 103P MKV03 MKV03 VH 3P VH 13D MX PITY IN STEEL OLLETS FOR OLLET MX SPEED DRILLING Ø TPPING MX Ø TYPE [M-threads] [rpm] 7 10 M3 M M M M M. 1 1 ER ER TR1 ER TR WEIGHT EXL. DPTOR [kg] VH 043P MKV3 MKV03 VH 03P MKV03 VH 03P VH 103P MKV03 MKV03 VH 3P VH 13D D MIN SPINDLE SPING MX SPINDLE SPING SHORTER SIDE LONGER SIDE ø cc ø cc , ø
6 4-SPINDLE HEDS Specifications VH 044P MKV4* MKV04 VH 04P MKV04 VH 04P VH 104P MKV04** MKV04** VH 4P VH14D MX PITY IN STEEL OLLETS FOR OLLET MX SPEED DRILLING Ø TPPING MX Ø TYPE [M-threads] [rpm] 7 10 M3 M M M M M. 1 ER ER TR1 ER TR *Gear ratio 1:1.4, ** Gear ratio 1:0., ll others 1:1 WEIGHT EXL. DPTOR [kg] VH 044P MKV4 MKV04 VH 04P MKV04 VH 04P VH 104P MKV04 MKV04 VH 4P VH 14D MIN SPINDLE SPING MX SPINDLE SPING SIDE ø cc ø cc , ø , On you can find more information as well as the same information as above in imperial units. When requesting a quote or ordering, please state: Model and ollet size. 4
7 MULTI-SPINDLE HEDS DIMENSIONS FOR E2 UNITS WITH MULTI-SPINDLE HEDS elow are specifications of the feasible head and unit combinations for drilling and tapping. Please also check out for D drawings and models of units with multi-spindle heads. E SK and E 33 SK D MKV2 VH 042P / 043P / 043LP / 044P MKV2 MKV3 / V4 MKV-VR3 VH 02P / 03P / 03LP / 04P VH 02P / 03P / 03LP / 04P MKV 02 / 03 / R03 / D DPTOR WEIGHT 0.3 KG E(F) D MKV2 VH 042P / 043P / 043LP / 044P MKV2 MKV3 / V4 MKV-VR3 VH 02P / 03P / 03LP / 04P D DPTOR WEIGHT 0.2 KG 4
8 E 33 D MKV2 VH 042P / 043P / 043LP / 044P MKV2 MKV3 / V4 MKV-VR3 MKV02 / 03 / R 03 / 04 VH 02P / 03P / 03LP / 04P VH 02P / 03P / 03LP /04P D DPTOR WEIGHT 0.1. KG E 4 and EG 4 D MKV2 VH 042P / 043P / 043LP / 044P MKV2 MKV3 / V4 MK-VR3 MKV02 / 03 / R03 / 04 VH 02P / 03P / 03LP / 04P MKV02 /03 / R 03 / 04 VH 02P / 03P / 03LP / 04P VH 102P / 103P / 103LP / 104P MKV D DPTOR WEIGHT 1.2 KG On you can find more information as well as the same information as above in imperial units. When requesting a quote or ordering, please state: Model and ollet size. 47
9 E and EG D MKV2 MKV3 / V4 MKVR3 MKV02 / 03 / R 03 / 04 VH 02P / 03P / 03LP / 04P MKV02 /03 / R 03 / 04 VH 02P / 03P / 03LP / 04P MKV1002 VH 102P / 103P / 103LP / 104P MKV02 MKV02S / 03 / R03 / 04 VH 2P / 3P / 3LP / 4P MKV02 / 02S / 03 / R03 / 04 VH 12 / 13 / 13L / D DPTOR WEIGHT 3.1 KG LS MKV2 VH MKV2 100 DPTOR WEIGHT 1.1 KG On you can find more information as well as the same information as above in imperial units. When requesting a quote or ordering, please state: Model and ollet size. 4
10 E2 Systems specialise in the design and production of Drilling and Tapping units and pneumatics/hydraulics according to customer specification. Our business is based on long experience and cutting-edge competence within the hydraulic and pneumatic technologies.the products are of compact design in order to offer high performance and save space. E2 products are in operation in practically every country around the world through distribution by E2 s representatives or delivery as vital components of other manufacturers equipment. large portion of E2 products are used in the automotive industry, but they can also be found in other manufacturing industries as well as the woodworking industry. Our customers include: Electrolux, General Motors, Getinge, Honda, Kinnarps, Rolls Royce, SKF and Volvo. REV 2 E2 Systems, Strömslundsgatan 3, SE-07 2 orås, Sweden Tel: +4 33, Fax:
COST-EFFECTIVE AUTOMATION
E Systems specialise in the design and production of Drilling and Tapping units and pneumatics/hydraulics according to customer specification. Our business is based on long experience and cutting-edge
More informationCOST-EFFECTIVE AUTOMATION
E Systems specialise in the design and production of Drilling and Tapping units and pneumatics/hydraulics according to customer specification. Our business is based on long experience and cutting-edge
More informationCOST-EFFECTIVE AUTOMATION COMPACT UNITS FOR
COST-EFFECTIVE AUTOMATION COMPACT UNITS FOR DRILLING TAPPING MILLING www.esystems.com You will find units for Drilling, Tapping and Milling installed wherever increased rates of production are required.they
More informationcost-effective automation
cost-effective automation compact units for drilling tapping milling www.e2systems.com AIR HYDRAULIC DRILLING UNIT BE(FP)22 AIR HYDRAULIC DRILLING UNIT BE(F) 22 The basic design of the BE(F) 22 consists
More informationcontrols BE 11 / HFs 100 BE 22 sk(m) and 33 sk(m) Working Pressure Working Pressure Air Air options
controls E s units are designed for automation and are simple to connect. The following installation example shows connections and the peripheral equipment required by the units. When installing several
More informationManual. Pneumatic Drilling/Milling Unit Series BE 22 SKM / BE 33 SKM
EN Manual Pneumatic Drilling/Milling Unit Series BE 22 SKM / BE 33 SKM Read this manual before installation and commissioning of the product. Keep for future reference. MAN073 - Manual BE 22&33 SKM, ORIGINAL,
More informationManual. Pneumatic Drilling Unit Series BEP 22 SK. Read this manual before installation and commissioning of the product. Keep for future reference.
EN Manual Pneumatic Drilling Unit Series BEP 22 SK Read this manual before installation and commissioning of the product. Keep for future reference. MAN027 - Manual BEP 22 SK, EN, Rev. 01.doc Table of
More informationAutomatic Drilling and Tapping Units
Automatic Drilling and Tapping Units Contents Page Automatic drilling and tapping units... 25 Dimension sketches... 23 Introduction More mechanization in your drilling operations Simple and cost effective,
More informationStraight Line Action Clamps
Straight Line Action Clamps Sizing and Application Chart Click Page # View N [lbf.] mm [inch] Series Page MC-SLA-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 5000
More informationManual. Air Operated Drilling Unit Series BE 21. Read this manual before installation and commissioning of the product. Keep for future reference.
EN Manual Air Operated Drilling Unit Series BE 21 Read this manual before installation and commissioning of the product. Keep for future reference. MAN033 - Manual BE 21, EN, ORIGINAL Rev. 03.doc 2 DECLARATION
More informationANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationPneumatic spindles Pneumatic built-in motors
Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial
More informationPERFORMANCE AND SPECIFICATION. BORING DIAMETER RANGE 1.5 to 24 BORING BAR STROKE 305, 610 or 915mm 12, 24, or 36
MLB610 Line Boring Machine Rev 1.0 Page 1 of 9 DESCRIPTION A versatile and modular line boring machine offering a choice of electric, hydraulic and pneumatic boring bar drive motors, with a mechanical
More informationPneumatic spindles Pneumatic built-in motors
Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial
More informationORSCO lubrication systems
ORSCO lubrication systems Extend chain life and reduce oil consumption Short-term return on investment (ROI) Cleaner conditions, less downtime and overall energy savings ORSCO series 170 The ORSCO concept
More informationManual. Air-hydraulic Drilling Unit Series BE 33. Read this manual before installation and commissioning of the product. Keep for future reference.
EN Manual Air-hydraulic Drilling Unit Series BE 33 Read this manual before installation and commissioning of the product. Keep for future reference. MAN045 - Manual BE 33, EN, Rev. 02.doc Table of content:
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More information.com More than a machine. Power your life
Mechanical Clamp, Precise working Solid Radial Drilling Machines ideal for Versatile use in the Single Part and Series Production This kind of MM-R40V is the Mechanical Clamp 40mm Solid Radial Drilling
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationIntroduction 3. Motorized Milling, Drilling and Tapping Spindles 5. Motorized Grinding Spindles 6. Motorized Air Bearing Spindles 8
High Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Contents Introduction 3 Motorized Milling,
More informationRobotic Machining ROBOT Systems TOOLS
Pneumatic PNEUMATIC Tools TOOLS for FOR Automated PROFESSIONALS: Deburring: Grinding GRINDING Spindles SPINDLES & AND Robotic Machining ROBOT Systems TOOLS Tough Consistent Proven MADE IN GERMANY www.dapramarking.com
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationFein The Metal Industry Specialists
www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING
More informationSpindles and converters
High Speed Spindles F A C T S A B O U T Spindles and converters SPINTEC spindles are designed for clients with high demands on accuracy and reliability of service. The spindles are manufactured with the
More informationTIM HIGH FREQUENCY SPINDLES
TIM HIGH FREQUENCY SPINDLES High-frequency spindle has a motor which is designed fit for high spindle speed. Because high-speed machining can be performed in a more stable manner, high-frequency spindle
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationConstant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM <1.4HP / 1.04kW
Constant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
More informationHigh Frequency Spindles
High Frequency Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Table of Contents Introduction
More informationHigh-performance products. Designed for you!
High-performance products. Designed for you! Impact Wrenches CP6748EX-P11R ATEX Art nr 6151590570 CP6768EX-P18D ATEX Art nr 6151590580 CP6778EX-P18D ATEX Art nr 6151590590 Dust-proof (IP6) and ATEX certified
More informationWSK COLLET CHUCK CHCHUCK WSK COLLETWS UC K K CO LL ET 74
WS K COLLET COLL CO LLET ET CHUC CH UCK 74 MAS403 BT-P CODE NO. D1 D2 L1 COLLET NUT G1 BT30 P6-2.0-6.0 19.6 6 N6 M8X1.0 P10-2.0-10.0 27.5 10 N10 M11X1.0 P6-2.0-6.0 19.6 P6-6 N6 M8X1.0 BT40 P10-2.0-10.0
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More informationNON-CONTACT TOOL BREAKAGE DETECTION SYSTEM
NON-CONTACT TOOL BREAKAGE DETECTION SYSTEM The mass production of mechanical parts requires very short machining times. Therefore a tool check, for guaranteeing high quality products with few rejects,
More informationWORKHOLDING. Collet Blocks TURNING MILLING GRINDING WORKHOLDING ROTARY.
WORKHOLDING ollet Blocks TURNING MILLING GRINDING WORKHOLDING ROTRY www.hardinge.com Part Setup Reduction Hardinge has several options for holding single or multiple parts on your machine table, in trunnions
More informationTHE RANGE OF TORNOS MACHINING CENTERS. think parts Think Tornos. almac FB CNC 3 to 6-axis horizontal bar milling machine.
THE RANGE OF TORNOS MACHINING CENTERS think parts Think Tornos almac FB 1005 CNC 3 to 6-axis horizontal bar milling machine. Productivity and precision from 3 to 6 axes Wide range of applications In any
More informationDSH screw jack. Product description. DSH screw jack
Product description DSH screw jack Conventional screw jack applications consist of one or more screw jacks. Usually they are driven by one electric motor and typically connected via drive shafts or couplings
More informationAIR MOTORS. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
AIR MOTORS 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
More informationFein The Metal Industry Specialists
www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationPNEUMATIC TOOLS FOR PROFESSIONALS: GRINDING SPINDLES AND ROBOT TOOLS
PNEUMATIC TOOLS FOR PROFESSIONALS: GRINDING SPINDLES AND ROBOT TOOLS Tough Consistent Proven MADE IN GERMANY www.westeccorp.com Table of contents Page 4 Pneumatic grinding spindles with vane motor Pneumatic
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationHydraulic cut-off saws, core drills and submersible pumps. Powerful, lightweight and portable
Hydraulic cut-off saws, core drills and submersible pumps Powerful, lightweight and portable The best power-to-weight Construction and rental companies around the world are discovering the advantages of
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationCollet Chucks and Collets
ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16
More informationGUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner
the Best of BOTH SYSTEMS The advantages of Hydraulic chucks & in one tool holder Now also available with ISO taper, MAS/BT and straight shank GUHROSync Guhring - your world-wide partner GUHROSync THE EASY
More informationAIR MOTORS. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
AIR MOTORS 60 W to 900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
More informationTRUCK MIXER DRIVES 500 SERIES
TRUCK MIER DRIVES 00 SERIES TRSMITL BONFIGLIOLI presents its new line of drives for truck mixer use. The newly designed product replaces drives from current production, which totalled 60,000 units sold
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationSYNCHRO TAPPER TM. Servo series. Mechanicai feed type tapping unit
Servo series The tapping unit is equipped with C servo motor to achieve highly accurate and efficient tapping. Compacttype tapping unit with total length of 3. Upgrades efficiency for tapping small size
More informationsystems Features Technical Data Spindle Motor Frequency Converter FC 1500-CT Dimensions CNC Base Machines E23 CNC Base Machines SYSTEMS Accessory
Accessory MAV 2.075 S Features Robust two-pole AC motor (asynchronous motor) Rectangular design, protection class IP54, isolation class F Casting bearing plate on A-side Aluminium diecasting B-side Special
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationMetAl. Optimum core drilling with the new FEIN KBB core drilling units and HSS drill bits.
MetAl Optimum core drilling with the new FEIN KBB core drilling units and HSS drill bits. Introduction New application solutions from FEIN. In 1895, FEIN invented the world s first electric hand drill.
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationTel VIT VIT VIT VIT VIT VIT VIT VIT-300
VIT-450-1 VIT-600-1 2 PCS HIRTH Coupling VIT-450-5 VIT-600-5 VIT-800-5 VIT-1000-5 VIT-1200-5 300x300 450x450 600x600 700x700 800x800 1000x1000 1200x1200 140 170 200 220 280 300 340 - ø30 ø40 ø40 ø60 ø60
More informationS O L U T I O N S ORSCO. Lubrication Systems. Extends Chain Life. Series 170 Standard System
T H E L AT E S T P R O D U C T S A N D N E W S F O R L I N C O L N C U S T O M E R S S O L U T I O N S JUNE 2009 VOL. 3, NO. 1 ORSCO Lubrication Systems Extends Chain Life Reduced Oil Consumption Short-term
More informationDRAFT. Heavy duty - adjustable force nitrogen gas spring stripper. Direct mounting to standard retainers for ball-lock and ISO headed punches.
DRFT Heavy duty - adjustable force nitrogen gas spring stripper Direct mounting to standard retainers for ball-lock and ISO headed punches new 1 1 DRFT 4 5 7 8 6 Ball-lock punch ISO 800 headed punch 1
More informationCollet Chucks for 5C / 16C / 3J Collets
Precision Workholding Technology ollet hucks for 5 / 16 / 3J ollets 5W Wide Opening ollet hucks www..com 5-ND Dead Length ollet hucks huck Features Dead length design with reduced nose for full size machines
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationDIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationu-tec UT Our change system, that makes EVERYTHING possible
u-tec UT Our chnge system, tht mkes EVERYTHING possible Terms nd conditions: You will find them on our website www.heimtec.com Home/Imprint/Terms nd Conditions This ctlogue, including ll its prts, is protected
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationThe Ultimate Solid Carbide Indexable Drill with a
The Ultimate Solid Carbide Indexable Drill with a Chamfering Option! Replaces Any Cylindrical Solid Carbide or High Speed Steel Drill www.iscar.com Engineered for Chamfering Performance Modular System:
More informationHIGH PRESSURE GEAR PUMP W900
HIGH PRESSURE GEAR PUMP W900 Concentric AB Innovation in Hydraulics THE POWER OF THE W900 A SERIES Concentric is one of the world s leading manufacturers of hydraulic pumps. In recent years we have focused
More informationOther Toolholders. (SwissQuick Reductions) (Morse Tapers) (Automotive Shank)
Other Toolholders (SwissQuick Reductions) (Morse Tapers) (Automotive Shank).01 Features and Benefits ERM/ERM and ER/ERM.02 ERM/ERM and ER/ERM SwissQuick Collet Reductions.03 Features and Benefits ISO 20/ER.04
More informationOMG NorthAmerica. The synthesis...
Series VH Series MO Series BAH Series TA OMG NorthAmerica The synthesis... SERIES BAH Extensions and Angle Heads SERIES HT Revolving heads SERIES TA-TAV-TAF-TAO Angle heads SERIES MO High precision spindle
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationHigh Speed Spindles Series
High Speed Spindles Series onstant High Speed and Torque 25,000-90,000 rpm,
More informationTradition in Perfection.
Angular Heads Tradition in Perfection. For more than 50 years the name ROMAI has stood for the highest precision and process reliability in machining. The next generation begins today. We have succeeded
More informationActuator Capabilities
Actuator Capabilities The Compact Difference... Compact Automation Products brand, is a market-leading manufacturer of space-efficient linear actuator solutions including, industry standard and custom
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationClamping Nuts. Sealing Disks Coolant Flush Disks. Clamping Nuts. Sealing Disks (DS) Coolant Flush Disks (KS)
Clamping Nuts Sealing Disks Coolant Flush Disks Clamping Nuts.01 Features and Benefits.02 Assembly Instructions.0 Hi-Q/ER Standard Nuts.06 Hi-Q/ERC Standard Coolant Nuts for DS and KS Disks.08 Hi-Q/ERC
More information20T Low Headroom Hoist Date TNC 20/4 LHR DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 890kg Weight D01-AHT35 REV0
REVISION HISTORY REV. DTE PPROVED D-HT REV Scale not to scale Designed y Drawn y Checked y pproved y Surname T. Mikolajewski T. Mikolajewski. itken Title of Project Title of Part / Linear up to, over up
More informationSERIES 36-AM & BD...4-5 SERIES 36-AM-RA & BD RA...6-7 SERIES 50-AM & BD...8-9 SERIES 36 TOOL CHANGER...10-11 SERIES 50-TOOL CHANGER...12-13 SERVO MOTOR ADAPTERS...14-15...16-17...18-19 COLLET NUT...19
More information1 Collets and collet sleeves
1 1.3 Wibemo - Honing sleeve 1.4 Wibemo - Extenso collets 1.6 Wibemo - Croco collets 1.10 Wibemo - CuBe collets 1.11 Wibemo - Phenol collets 1.12 Custom made collets 1.18 Wibemo - Wifex collets 1.22 Tornos
More informationWe do Specials! mimatic Special Solutions» Cutting Tools»» Live Tools
» Cutting Tools»» Live Tools We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools»» Live Tools Table of Contents Cutting Tools
More informationТел.: (495) Dovetail slides LF35EN
LF35EN050930 5Positioning systems 1 SSM with micrometer ring with spring preloading, allowing easy turning. One division equals 0,02. 1 SSK as SSM, but instead of knurled screw equipped with crank handle.
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationMTX Series. Fuel Tank Replacement
all (for Item No. TD 1 1 and 3-7 1 2 and 3-7 14 and 16-19 15 and 16-21 7 366900100 ttach Kit ( & W Tank) 1 8 022710809 Nylon Nut M8 3 9 001220825 olt 8X25 T 3 10 030208200 Washer, Lock M8 3 11 031108160
More informationPNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel
PNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel construction and have compact cylinders without tie-rods.
More informationSPECIFICATIONS AND OUTLINE DIMENSIONS
/7 May 05 JAS Dynaset HPW pump gives great waterpower with the best power to weight ratio in the World. Small size, lightweight, outstanding durable construction with ingenious piston-to-piston action
More informationTaladro automático por coordenadas Automatic coordinate drilling machine TECHNICAL CHARACTERISTICS
RAPID DRILL TRD SERIES FIXED BED-TYPE Equipment: automatic X- Y and Z -axis, driven by servo-motors (programmable) Spindle turning driven also by asynchrony motor of 8,9 kw or servomotor 4,4 kw. Column
More informationMO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
More informationAcoustic Door Closer Instructions
Acoustic Door Closer Instructions 1 Contents Contents... 2 Introduction... 3 Contents of Box... 4 Contents of Door Closer Arm Box... 4 Contents of Accessories Box... 5 Tools Required... 5 Fitting the Door
More informationCreating and using [ MECOF ] [ EMCO ]
Creating and using [ MECOF ] Mecof is one of the leading manufacturers of high speed and high precision milling and boring machining centres. With many years of experience and an extensive know-how, Mecof
More information> MADE IN GERMANY. Powerful solutions passionate people. Range of Tools. Drilling machine KDXS
> MADE IN GERMANY Powerful solutions passionate people Range of Tools Drilling machine KDXS Range of tools Drilling Machine KDXS Productivity and quality are always results of optimal coordinated machines
More informationMETAL. Faster core drilling. In metal, in any situation. FEIN core drills KBU and KBH powerful and universal tools for efficient metal drilling.
METAL Faster core drilling. In metal, in any situation. FEIN core drills KBU and KBH powerful and universal tools for efficient metal drilling. NEW CORE DRILLING Get to the core of the matter faster. With
More informationAir Motors. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
Air Motors 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
More information