TIM HIGH FREQUENCY SPINDLES

Transcription

1

2 TIM HIGH FREQUENCY SPINDLES High-frequency spindle has a motor which is designed fit for high spindle speed. Because high-speed machining can be performed in a more stable manner, high-frequency spindle has been widely used in semiconductor waper, precision glass grinding, mobile phone case, precision automotive parts and precision machining. Depending tool replacement method, high-frequency spindle has been classified into Manual Tool Change in which tools are replaced using replacement tools such as spanner and Automatic Tool Change in which tools are automatically replaced using pneumatic cylinder and hydraulic cylinder for users convenience. TIM High Frequency Spindles for Manual Tool Change Type is Characteristics 01 Liquid cooling Based on water-cooling method, it keeps the temperature of motor at a certain level and cools bearing unit. As a result, it keeps the spindle highly precise and prolongs its life. 02 Air purge The unique air purge structure of TIM spindle prevents cutting oil and foreign substances from entering inside and extends the life of bearing. 03 Balancing Through balance calibration using a balance meter, spindle vibration is minimized to improve processing quality. 04 Connecting Spindle power and sensor are connected using a connector instead of lead wire for easy installation and removal of spindle and stability. 02 TIM SPINDLE

3 THA Wheels are installed using wheel flange. MAX. MAX rpm. THA A-B MAX.C D E F kw/rpm Volt Weight Torque Steel/Ceramic THA / / kg THA / / kg THA / / kg THA / / kg THA / / kg THA / / kg THA / / kg Mounting distance can be adjusted if necessary. For the adjustment, please contact us in advance. Technological Innovation Manufactures 03

4 THC Wheels are directly installed onto axes. THC A-B MAX.C D E F G MAX. Torque kw/rpm Volt THC THC 80-2 THC THC -300 THC THC / / / / / /12000 Mounting distance can be adjusted if necessary. For the adjustment, please contact us in advance. MAX rpm. Steel/Ceramic 30000/ / / / / / TIM SPINDLE

5 THR Tools are installed using collet. MAX. THR A-B COLLET C D E kw/rpm Volt Torque THR THR 80-2 THR 90-2 THR THR -300 THR THR ER11-6 SK6-6 ER16-10 SK10-10 ER16-10 SK10-10 ER25-16 SK16-6 ER25-6 SK16-6 ER32-20 SK16-6 ER40-25 SK / / / / / / /12000 Mounting distance can be adjusted if necessary. For the adjustment, please contact us in advance. MAX rpm. Steel/Ceramic/Ceramic+Oil 30000/48000/ /42000/ /42000/ /30000/ /30000/ /24000/ /18000/- Technological Innovation Manufactures 05

6 THW Wheels are installed using wheel flange. To take advantage of a machining space, it is installed behind a motor. As a result, it minimizes the spindle diameter in the tools and maintains motor output. MAX. THW A-B MAX.C D E F kw/rpm Volt Torque THW THW THW -140 THW / / / /12000 Mounting distance can be adjusted if necessary. For the adjustment, please contact us in advance. / MAX rpm. Steel/Ceramic 24000/ / / /18000 Weight 9kg 26kg 40kg 62kg 06 TIM SPINDLE

7 THP THP A-B C D E F G MAX. Torque kw/rpm Volt THP THP 80-2 THP 90-2 THP THP -300 THP THP / / / / / / /12000 Mounting distance can be adjusted if necessary. For the adjustment, please contact us in advance. MAX rpm. Steel/Ceramic/Ceramic+Oil 30000/48000/ /42000/ /42000/ /30000/ /30000/ /24000/ /18000/- Technological Innovation Manufactures 07

8 THM It can be installed in the existing machine and enables high-speed drilling and end milling. Since a motor is used instead of the conventional gear box, it is good in terms of machining roughness. Operating devices are installed. MAX. THM NO. BT/NT no. A B Weight kw/rpm Volt Torque MAX rpm. Steel/Ceramic THM 30 BT30/NT30 0 R45 9kg / /30000 THM 40 BT40/NT40 0 R kg / /30000 THM BT/NT 30 R kg / / TIM SPINDLE

9 THMR Spindle can be directly installed onto the bed surface without separate installation of bracket. The block unit is made of aluminum to reduce weight. Tool mounting is available in diverse shapes. MAX. THMR A. COLLET B C D E F G H I kw/rpm Volt Torque THMR 140 THMR 170 THMR ER25-16 SK16-16 ER32-20 ER40-25 SK Mounting hole distance can be adjusted if necessary. For the adjustment, please contact us in advance. 4.5/24000 / 10/18000 / 15/12000 / MAX rpm. Steel/Ceramic 100/ / /100 THMR 140 THMR 170 THMR Weight 27kg 37kg 70kg THMR 170-BT30/NT30 THMR -BT40/NT40 THMR 170-HSK 40C THMR -HSK 63C Technological Innovation Manufactures 09

10 MOTOR 10 TIM SPINDLE

11 ATC TYPE TIM High Frequency Spindles for Automatic Tool Change Type is Characteristics 01 Clamping systen It is designed to prevent cylinder pressure from penetrating into bearing at replacement of spindle tools. No shock will be imposed on bearing at the replacement of tools. 02 Position sensor Whether or not tools are tightly installed can be thoroughly observed using three proximity sensors so that malfunction rates at replacement of tools and defect rates can be reduced. 03 Connecting Spindle power and sensor are connected using a connector instead of lead wire for easy installation and removal of spindle and stability. Technological Innovation Manufactures 11

12 THMS 80 THMS 90 THMS 80 > Max. RPM Steel 24000/Ceramic TOOL HOLDER VOLTAGE POWER TORQUE TOOLCHANGE LUBRICATION WEIGHT HSK-E25/ISO20, BT20 V/V 3.0kw 1.3Nm PNEUMATIC 5bar/3Sensor GREASE 9kg THMS 90 > Max. RPM Steel 20/Ceramic TOOL HOLDER VOLTAGE POWER TORQUE TOOLCHANGE LUBRICATION WEIGHT HSK-E32 V/V 3.0kw 1.3Nm PNEUMATIC 5bar/3Sensor GREASE 11kg 12 TIM SPINDLE

13 THMS THMS 120 THMS > Max. RPM Steel 18000/Ceramic TOOL HOLDER VOLTAGE POWER TORQUE TOOLCHANGE LUBRICATION WEIGHT HSK-E32 V 4.5kw 1.7Nm PNEUMATIC 5bar/3Sensor GREASE 15kg THMS 120 > Max. RPM Steel 100/Ceramic TOOL HOLDER VOLTAGE POWER TORQUE TOOLCHANGE LUBRICATION WEIGHT HSK-E40/ISO30, BT30 V 10kw 6.0Nm PNEUMATIC 6bar/3Sensor GREASE 26kg Technological Innovation Manufactures 13

14

15 THMS THMS 180 > Max. RPM Steel 8000/Ceramic TOOL HOLDER VOLTAGE POWER TORQUE TOOLCHANGE LUBRICATION WEIGHT ISO, BT V 22kw 17Nm HYDRAULIC 70bar/3Sensor GREASE 93kg Technological Innovation Manufactures 15

16 Tel : (02) , Fax : (02) #-10, Noonsa-dong, Gwangmyeong, Gyeonggi-do Tel : , Fax :