Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
|
|
- Earl Sims
- 5 years ago
- Views:
Transcription
1 Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity
2 AFD Applications Ease of Integration into Machine or Process Extensive range of mounting clamps Control interfaces to link AFD(E) to other equipment through pneumatics or electrically Single signal required for AFD(E) to perform cycle Output signals at datum and depth Electric motor mounting on 200, 400 and 600 series can be rotated 180 Comprehensive range of Product For single spindle operations to multi spindle processes Pneumatic and electric drive from 0.22 to 1.1kW (0.3 to 1.47hp) with thrusts from 1735N (390lbf) Reliability through quality Modular Design Flexibility of unit function and speed Common components in different models reduce inventory Multiple spindle head options Drilling and tapping options for all models 2
3 Contents Auto Feed Drills & Tappers Auto Feed Drills & Tappers Features... 4 How to select your AFD Drilling AFDE200 - AFDE230 (Electric drive) kw (0.34hp) to rpm AFD205 - AFD215 (Pneumatic drive) kw (0.30hp) to rpm AFDE400 - AFDE430 - AFDE410 - AFDE440 (Electric drive) kw (0.44-1hp) to rpm AFD415 (Pneumatic drive) kw (0.5hp) to rpm AFDE610 - AFDE620 - AFDE640 (Electric drive) kw (1-1.47hp) to 6300 rpm AFD684 (Pneumatic drive) kw (0.82hp) - 60 to 3300 rpm Tapping AFTE480 (Electric drive) kw (1hp) to 1740 rpm Accessories Control Block & Interfaces AFD Control Options Output Spindles - Chucks Multiple Spindle Heads Collets Clamps AFD Selection Program
4 Auto Feed Drills & Tappers Features Optional hydraulic control unit for fine feed control and reduction of break through force Rigid cast aluminium housing Integral belt tensioner Motor Powers up to 1.1kW (1.5hp) Modular Control Block Options A1- Full Feature Block Pneumatic signal ports for stop, start and cycle complete Capable of using proximity switches to sense depth and datum positions Control of feed and retract speed A6 - Simple Control Block Forward and retract port for control via remote valves Capable of using proximity switches to sense depth and datum positions Dynamic thrusts up to 1735 N (390 lbf) Front of tools sealed to IP64 (1) Interchangeable modular output spindles including multiple spindle and tapping heads Modular components for flexibility of speed and function Simple interfaces for communicating to other equipment Control options including peck feed, dwell, and skip feed Heavy duty belts and pulleys 4
5 How to select your AFD How to Order : AFD(E) CONTROL + BLOCK + OUTPUT SPINDLE Model Type Pneumatic Feed and Drive AFD kW (0.30hp) AFD kW (0.30hp) AFD kW (0.51hp) AFD kW (0.82hp) Pneumatic Feed, Electric Drive AFDE kW (0.34hp) AFDE kW (0.44hp) AFDE kW (1.00hp) AFDE kW (1.00hp) AFDE kW (1.50hp) Electric Feed and Drive via Leadscrew AFTE kW (1.00hp) Control Block (see page 22) A1 Full feature type (1) Automatic cycle A6 Simple type (1) Remote cycle control A7 Leadscrew type PNP A8 Leadscrew type NPN Output Spindle (see page 24 to 28) Code Output type - Chuck - Collets - Multi Head - Tapper + Optional - HCU - Clamps - Interface K (see page 23 to 32) (1) Not required on AFTE models. 5 5
6 How to select your AFD Electric drive - Pneumatic feed Type and Speed 50Hz AFDE200 Serie kw (0.34hp) Free speed 60Hz AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE400 Serie kw ( hp) AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE410 Serie kw (1hp) AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE610 Serie kw (1hp) AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE620 Serie kw (1.47hp) AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE Maxium stroke Dynamic thrust mm in. N lbf Mild Steel Aluminium Hard wood Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm
7 How to select your AFD Pneumatic drive - Feed Type and Speed Free Speed NO LOAD rpm AFD205 Serie kw (0.30hp) AFD AFD AFD AFD AFD AFD AFD215 Serie kw (0.30hp) AFD AFD AFD AFD AFD AFD AFD415 Serie kw (0.51hp) AFD AFD AFD AFD AFD AFD AFD AFD AFD684 Serie kw (0.82hp) AFD AFD AFD AFD AFD AFD AFD AFD Maxium stroke Dynamic thrust mm in. N lbf Mild Steel Aluminium Hard wood Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Ø mm Multi Spindle Drilling To calculate the cross sectional area of a drill diameter use the formula u(r²) (3.14 x radius²) For example, Area of Ø 6mm hole 3.14 x 3 x 3 = 28.26mm 2 1. Calculate cross sectional area of hole by refering to the table belowor the formula. 2. Calculate the cross sectional area of a hole by the number of spindles. 3. Select the nearest greater hole cross sectional area from the table. 4. From the specification charts on pages 6 and 7 select the AFD with the appropriate capacity. Example - AFD415 5 off ø 1.5mm holes to be drilled in aluminium x 5 = 8.83mm² ø 4mm hole has a cross sectional area of 12.56mm² Therefore AFD has adequate capacity to drill 5 off ø 1.5mm holes in aluminium. The above data is a guide for reference purposes only. Please read carefully the safety operating and maintenance instructions supplied with the unit prior to installing your Desoutter Auto Feed Drill. The performance data for air drive and feed functions are obtained with an air inlet pressure of 6,3 bar, and the speeds indicated are nominal. The capacities listed in this catalogue are for guidance only, and actual test and / or consultation with your local Desoutter Sales Representative is always recommended. Specifications are subject to change without prior notice. Ø General Data Area mm lbf.in mm 2 lbf.in 1.0 1/ / / / / / / / / / / / / / / / / /
8 Electric drive - Pneumatic feed AFDE200 - AFDE kw (0.34hp) to rpm COMPACT UNIT SIZE High speed options up to Hz, Hz with K42 output Capacity up to 5mm (3/16») in aluminium Modular output spindles For use with H21 Tapping Gearbox or Multi-spindle heads output spindle K35 is needed Tapping gearbox & Accessories: see pages model PART NUMBER model Canada CSA 575V (60Hz) AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE All models: Weight: 10.1 kg (22.2lb) - Air consumption per cycle: <0.032 l/s (<0.02 cfm) - Sound level: <70 db(a) 50Hz rpm SPEED 60Hz rpm kw POWER Motor power hp CURRENT 50Hz Amps 60Hz Amps THRUST Dynamic thrust N lbf STROKE Working stroke mm in. TAPPING TORQUE AVAILABLE Nm lbf.in 8
9 Electric drive - Pneumatic feed AFDE200 - AFDE230 9
10 Pneumatic drive - feed AFD205 - AFD kw (0.30hp) to rpm COMPACT UNIT SIZE options of compact AFD205 or long stroke AFD215 High thrust/size ratio Capacity up to 5mm (3/16») in aluminium Modular output spindles A For use with H21 Tapping Gearbox or Multi-spindle heads output spindle K35 is needed B Tapping gearbox & Accessories: see pages PIC. REF model PART NUMBER SPEED NO LOAD POWER Motor power rpm kw hp THRUST Dynamic thrust N lbf STROKE Working stroke mm in. kg WEIGHT lb TAPPING TORQUE AVAILABLE A AFD A AFD A AFD A AFD A AFD A AFD Nm lbf.in B AFD B AFD B AFD B AFD B AFD B AFD All models: Air consumption per cycle: 9.5 l/s (20 cfm) - Sound level: <75 db(a) 10
11 Pneumatic drive - feed AFD205 - AFD215 AFD205 pneumatic drive AFD215 pneumatic drive 11
12 Electric drive - Pneumatic feed AFDE400 - AFDE430 - AFDE410 - AFDE kw (0.44-1hp) to rpm Hz, Hz 0.33kW (0.44HP) and 0.75kW (1.00HP) options Capacity up to 10mm (3/8») in aluminium, 8mm (5/16») in mild steel Spindle sealed to IP64 standard Modular output spindles versatile range For use with Multi-spindle heads output spindle B24 is needed Tapping gearbox & Accessories: see pages model PART NUMBER model Canada CSA 575V (60Hz) SPEED 50Hz 60Hz POWER Motor power CURRENT 50Hz 60Hz THRUST Dynamic thrust WEIGHT TAPPING TORQUE AVAILABLE rpm rpm kw hp Amps Amps N lbf kg lb Nm lbf.in AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE All models: Working stroke: 100mm (3.94 ) - Air consumption per cycle: <1 l/s (<0.04 cfm) - Sound level: <70 db(a) 12
13 Electric drive - Pneumatic feed AFDE400 - AFDE430 - AFDE410 - AFDE440 model A B C D E F G mm in. mm in. mm in. mm in. mm in. mm in. mm in. AFDE / AFDE /-1200/ AFDE to AFDE / AFDE /-1200/ AFDE to
14 Pneumatic drive - feed AFD kw (0.51hp) to rpm long working stroke of 100mm (3.94») spindle sealed to IP64 standard Capacity up to 10mm (3/8») in aluminium, 8mm (5/16») in mild steel Modular output spindles Compact unit and versatible range For use with Multi-spindle heads output spindle B24 is needed Tapping gearbox & Accessories: see pages model PART NUMBER Free speed NO LOAD POWER Motor power THRUST Dynamic thrust STROKE Working stroke WEIGHT TAPPING TORQUE AVAILABLE rpm kw hp N lbf mm in. kg lb Nm lbf.in AFD AFD AFD AFD AFD AFD AFD AFD All models: Air consumption per cycle: 9.9 l/s (21 cfm) - Sound level: 75 db(a) 14
15 Pneumatic drive - feed AFD415 15
16 Electric drive - Pneumatic feed AFDE610 - AFD620 - AFDE to 1.1 kw (1-1.47hp) to 6300 rpm 2 power ratings to give optimum power/thrust combination Heavy duty belts and pulley drive with integral belt tensioner Capacity up to 12mm (1/2») in mild steel spindle sealed to IP64 standard Modular output spindles heavy duty range For use with J19 Tapping Gearbox or Multi-spindle heads output spindle B24 is needed see pages Tapping gearbox & Accessories: see pages model part no. model Canada CSA 575V (60Hz) All models:working stroke: 100 mm (3.94 ) part no. 50Hz SPEED 60Hz POWER Motor power CURRENT 50Hz 60Hz THRUST Dynamic thrust WEIGHT TAPPING TORQUE AVAILABLE rpm rpm kw hp Amps Amps N lbf kg lb Nm lbf.in AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE AFDE Air consumption per cycle: <2.5 l/s (<0.09 cfm) - Sound level: <70 db(a) 16
17 Electric Drive - Pneumatic Feed AFDE610 - AFDE640 model A B C D E F G mm in. mm in. mm in. mm in. mm in. mm in. mm in. AFDE / AFDE /1200/ AFDE AFDE / AFDE to
18 Pneumatic drive - feed AFD kw (0.82hp) - 60 to 3300 rpm higher pneumatic power For use with J19 Tapping Gearbox or Multi-spindle heads output spindle B24 is needed How to Order AFD684: AFD684 CONTROL OUTPUT + BLOCK + SPINDLE + OPTION Tapping gearbox & Accessories: See pages model SPEED rpm POWER Motor power kw hp THRUST Dynamic thrust N lbf STROKE Working stroke mm in. kg WEIGHT lb TAPPING TORQUE AVAILABLE Nm lbf.in AFD AFD AFD AFD AFD AFD AFD AFD Drilling performance specification Silencers for Air Motors are not supplied with complete tools Air consumption per cycle: 16.5 l/s (35 cfm) - Sound level: <87 db(a) 18
19 Pneumatic drive - feed AFD684 SILENCER OPTIONAL ACCESSORIES Silencer - sinter bronze (noise clamp 15 db(a) - Power loss 10) 2 Silencer (noise clamp 20 db(a) - Power loss 10) 3 Silencer (noise clamp 25 db(a) - Power loss 7) 19
20 Electric drive - Leadscrew feed AFTE kw (1hp) to 1740 rpm High power brake motors with 0.75kW (1 HP) Supplied fitted with proximity switches for depth, datum and no hole sensing, PNP Quick release interchangeable leadscrew and nut assembly Capacity up to 10mm (3/8») in mild steel, 16mm (5/8») in aluminium depending on thread form high power and accuracy Optional NPN Switches kit available: (P.N ) Leadscrew/nut assemblies AFTE480 SHAPE Proximity Sensor Leadscrew Nut Leadscrew Quick release Leadscrew and Nut Assembly REPLACEMENT LEADSCREW / NUT ONLY ORDERING CODE THREAD SIZE / PITCH L mm L mm L mm L mm L mm L mm L mm L mm L mm L10 40TPI L12 32TPI REPLACEMENT LEADSCREW / NUT ONLY ORDERING CODE THREAD SIZE / PITCH L13 28TPI L15 24TPI L17 20TPI L19 18TPI L20 16TPI L25 2BA L22 1/8 NPT L mm L mm L mm Other leadscrews available to special order. Accessories: see pages model 50Hz Drilling performance specification SPEED 60Hz POWER Motor power 50Hz CURRENT 60Hz TORQUE Tapping torque available STROKE Pitch controlled stroke WEIGHT rpm rpm kw hp Amps Amps Nm lbf.in mm in. kg lb AFTE AFTE AFTE AFTE AFTE AFTE Sound level: <70 db(a) 20
21 Electric drive - Leadscrew feed AFTE480 model A B C D E F G mm in. mm in. mm in. mm in. mm in. mm in. mm in. AFTE /330/ AFTE /1200/
22 Control Blocks and Interfaces Control Blocks S2 A1 Full Feature Control Block Part No SW2 SW2 R A6 Simple Control Block Part No ST 1 SP S1 P M SW1 Air Connections R Air Return Port Connects to breather port in the nose of the tool to provide extra retract capability with heavy front end attachments (10-32) ST Start Button For manual operation and set-up 1 Remote Start Signal Port Pulse (10-32) SP Manual Stop Button Interrupts cycle and returns AFD to datum P Remote Stop Signal Port Requires external signal pulse for returning the unit to datum rest position (10-32) Air inlet (1/4" BSP or 1/4" NPT) M Work Cycle Complete Port Used for sequence control with other AFD s clamps, index tables, etc (positive at datum position) (10-32) Depth Stop Signal Port Used with external circuits such as dwell or pecking (10-32) Retract rate adjustment control Advance rate adjustment control Feed rate adjustment control F Feed port (1/8" NPT) RN Return port (1/8" NPT) F RN SW1 Electrical Connections S1 Start solenoid S2 Stop solenoid SW1 Datum return (M8 x 1.00) SW2 Depth position (M8 x 1.00) Electrical Interfaces (not included with control blocks) C3 Part No Comprises: 2 x M8 Proximity Switches PNP (NO) 2 x Plug-in Cables C5 Part No Comprises: 2 x M8 Proximity Switches NPN (NO) 2 x Plug-in Cables Solenoid Valves All 24V DC NC Valve normally closed NO Valve normally open Proximity Switches All 10-30V DC NC Normally closed NO Normally open C10 Part No Comprises: 2 x M8 Proximity Switches PNP 2 x Plug-in Cables 2 x Solenoid Valves (NC) C11 Part No Comprises: 2 x M8 Proximity Switches PNP 2 x Plug-in Cables 1 x Solenoid Valve (NC) 1 x Solenoid Valve (NO) C12 Part No Comprises: 2 x M8 Proximity Switches NPN 2 x Plug-in Cables 2 x Solenoid Valves (NC) 22
23 Accessories AFD Control Options H.C.U Adjustable Hydraulic Control Unit MIN. PLUNGER MAX. LOAD MINIMUM FEED RATE MAX. STROKE A B OPERATING LOAD AT 2230N (500LBS) LOAD kg lbs kg lbs mm/sec in/sec mm in mm in mm in D D D D Each of these H.C.U unit needs the conversion Kit Part Number to be installed Peck feed control Used when hole depth is five times hole diameter. Helps clear chips, avoids overheating and bit breakage. Hole accuracy is improved. For use with Full Feature Control Block A1 (0-10 seconds) STROKE D4 25mm (1") D5 50mm (2") D6 75mm (3") Dwell control Used to dwell drill bit at the bottom of the stroke. Can be used to spot face, blind hole polish, friction weld plastic components and spin rivet. For use with Full Feature Control Block. DESCRIPTION E1 Dwell Control Unit Complete Skip feed control Skip drilling - custom H.C.U s available on request. Skip control ensures minimum cycle times without breakthrought burrs when drilling tubes, pocketed castings etc, with two controlled feeds, and fast travel through the empty space. Information Required 1. Depth of first cut 2. Depth of skip 3. Depth of second cut 4. Drill point angle 2323
24 Accessories OUTPUT SPINDLES Interchangeable modular output spindles Precision option for collet types, R2 and R36 AFDE200/230 - AFD205 - AFD215 FUNCTION ORDER CODE FEATURES RECOMMENDED SPEED RANGE High Speed Output Spindle K42 Collet Chuck can be fitted to any AFDE200 to step up speed by 4.28 : 1. Note: Max. allowable speed rpm. See page 28 for collets rpm Collet Chuck K2 See page 28 for range of collets rpm A No. 1 Jacobs Taper Output Spindle K32 K35 No. 1 Jacobs Taper and for use with chucks A = 23mm (0.91 ) No. 1 Jacobs Taper and for use with tapping or multi spindle heads - A = 15.5mm (0.61 ) rpm Tapping Head Output Spindle H mm (3/16"-5/16") capacity Use with K rpm AFDE400/430 - AFDE410/440 - AFD415 - AFDE610/640 - AFDE620 - AFDE625 - AFTE480 FUNCTION ORDER CODE FEATURES RECOMMENDED SPEED RANGE 10mm (3/8") Key Adjustable Chuck Output Spindle B1 Part No. includes chuck key Integral Collet Chuck Output Spindle Large Integral Collet Chuck Output Spindle B2 R2 R36 Up to 7mm (0.276") collet capacity (see page 28 for Collet Range) Standard Output Assembly Precision Output Assembly Up to 16mm (0.63") collet capacity (see page 28 for Collets) Precision Output Assembly Taper Output Spindle and for use with chucks and multi spindle heads Preset Tooling DIN55058 Output Spindle AFD415, AFDE400 Externally Adjustable Screwdriver Head Output Spindle AFD415, AFDE400/ 410 Tapping Head Output Spindle AFDE600/610 Tapping Head Output Spindle B24 No. 2 Jacobs Taper A = 30 (1.18") B32 No. 1 Jacobs Taper A = 24.1 (0.95") B16 B16 Taper Output A = 34.8 (1.37") ØA ØB C D mm mm mm mm B3 Standard Output Assembly B5 B6 B7 B8 1/4" fem. hex. drive. Torque range Nm ( ins. lbs.) 5/16" fem. hex. drive. Torque range Nm ( ins. lbs.) mm (3/16-5/16 ) capacity mm (9/64-1/4 ) capacity mm (3/16" - 3/8") capacity J For use with B24 output
25 Accessories "PUSH PULL" TAPPING HEADS AFDE200 Serie H21 Tapping Gearbox Part No Capacity 4.5-8mm (3/16-5/16 ) Use with K35 output AFDE400 Serie B7 Tapping Gearbox Part No Capacity mm (9/64-1/4 ) B8 Tapping Gearbox Part No Capacity 4.5-8mm (3/16-5/16 ) AFDE610 Serie J19 Tapping Gearbox Part No Capacity mm (3/16-3/8 ) Use with B24 output TAPPING CHUCKS FUNCTION JACOBS TAPER A B Ø CHUCK FITTING TAP SHANK mm in. mm in. mm in. Optional Collets Tapping Chucks with flexible Collet (included) No /64-1/ No /16-5/ No /16-3/ Spare or replacement Collets 2-4.5mm (5/65-3/16 ) Capacity to suit 29462/ mm (9/64-1/4 ) Capacity to suit 29462/ mm (3/16-5/16 ) Capacity to suit 29462/ mm (3/16-3/8 ) Capacity to suit mm (9/32-1/2 ) Capacity to suit DRILLING CHUCKS FUNCTION DESCRIPTION Max Drill Depth 15mm (0.59 ) 6.5mm (1/4 ) Key Adjustable Chuck Part No. includes Chuck Key. Use with No. 1 standard Jacobs taper outputs K32 and B32 Max Drill Depth 34mm (1.34 ) 10mm (3/8 ) Key Adjustable Chuck Part No. includes Chuck Key. Use with No. 2 standard Jacobs taper outputs B24 Max Drill Depth 52mm (2.04 ) 34.5mm (1.36 ) 48mm (1.89 ) 10mm (3/8 ) Key Adjustable Chuck Part No. includes Chuck Key. Use with No. 1 standard Jacobs taper outputs B24 Max Drill Depth 52mm (2.04 ) 13mm (1/2 ) Key Adjustable Chuck Part No. includes Chuck Key. Use with No. 1 standard Jacobs taper outputs B24 MORSE ADAPTOR FUNCTION DESCRIPTION No.2 Morse Taper No.2 Jacobs Taper Morse Taper Adaptor No.2 Jacobs female taper to No.2 Morse female taper
26 Multiple Spindle Heads Range of adjustable spindle positions for 2 and 3 spindle heads Special fixed spindle heads available for non standard hole patterns or dedicated applications TYPE OF HEAD DRILLING NUMBER OF SPINDLES SPINDLE CENTRE OR PC mm in. MAXIMUM COLLET SIZE mm in. AFD205 AFD215 AFDE200/230 AFD415 AFDE400/430 AFDE410/440 AFDE610/640 AFD684 AFTE480 COLLET TYPE (SEE PAGE 28) A A A B A D A D B 3 inline D C 3PCD D TAPPING A A A B A D A D B 3 inline D C 3PCD D Output spindles for use with multiple spindle heads (2) MAXIMUM COLLET SIZE AFD205 AFD215 AFDE200/230 AFD415 AFDE400/430 AFDE410/440 AFDE610/640 AFD625 K35 B24 B24 B24 (2) How to order Examples: AFDE A1-K AFD A6-B AFDE A1-B
27 Accessories QUILL DATUM QUILL DATUM 2 spindles adjustable Multiple Spindle Heads A Drilling 3 spindles inline adjustable Tapping 3 spindles adjustable spindles fixed A B B C D D C D TYPE OF HEAD PART NO. MAX. SPEED MIN./MAX. CENTRES A - B MIN. PCD MAX. PCD DIMENSIONS C D F H rpm nmmm in. in. nm mmin. in. mmp.n in. mm P.N in. mm P.N in. mm P.N in. mm in. ADJUSTABLE SPINDLE A A A A A A A A B B C A A PART For fixed D spindle heads, please contact your local customer center. NO. Minimum centres are dependent nm in. on collet nm size, in. overall diameter P.N on the distance P.N between P.N spindle and P.N overall lengths on collet size. Desoutter can provide dimensions if required. Always provide details of hole pattern, hole diameters and material to be machined when ordering a fixed spindle head. 2 F
28 Collets Collets for multiple spindle heads Type A - Threaded types SIZE Ø SIZE Ø mm in. mm in Collets for multiple spindle heads Type D - Threaded types SIZE Ø SIZE Ø mm in. mm in Collets for multiple spindle heads Type B - Threaded types SIZE Ø SIZE Ø mm in. mm in Collets for multi spindle heads Type C For use with B2 (326573), R2 (384113), K2 (357183), K42 (375263) SIZE Ø SIZE Ø mm in. mm in For use with R36 (389273), ER25 TYPE SIZE Ø SIZE Ø mm in. mm in
29 Clamps AFDE200/230 - AFD205/215 Parallel Clamp Swan Neck Clamp Right Angle Clamp Base Clamp Swivel Clamp Bar Clamp Mounting Tube Tubing is of the same outside diameter as the auto feed unit and is available in the following standard lengths. AFDE200/230 - AFD205/215 ACCESSORIES Parallel clamp Righ Angle clamp Swivel clamp Swan Neck clamp Base clamp Bar clamp Mounting Tube 228 (9") length, Ø (1.574"-1.575") Mounting Tube 457 (18") length, Ø (1.574"-1.575") Mounting Tube 610 (24") length, Ø (1.574"-1.575")
30 Clamps AFDE400/430/410/440 - AFD415 Parallel Clamp Adjustable Bar Clamp Right Angle Clamp Narrow Bar Clamp Swivel Clamp Bar Clamp Base Clamp Mounting Tube Tubing is of the same outside diameter as the auto feed unit and is available in the following standard lengths. AFDE400/430/410/430 - AFD415 ACCESSORIES Parallel clamp Righ Angle clamp Swivel clamp Bar clamp Base clamp Adjustable bar Clamp Narrow bar Clamp Mounting Tube 305 (12 length, Ø (2.225"-2.233") 9462 Mounting Tube 457 (18") length, Ø (2.225"-2.233") 9472 Mounting Tube 610 (24") length, Ø (2.225"-2.233") 9482 Mounting Tube 760 (30") length, Ø (2.225"-2.233")
31 Clamps AFDE610/640 - AFD684 Base Clamp 125 (4.92") 108 (4.25") Bar Clamp Mounting Tube Tubing is of the same outside diameter as the auto feed unit and is available in the following standard lengths. AFDE610/640 - AFD625 ACCESSORIES Base clamp Bar clamp Mounting Tube 610 (24") length, Ø 78 (3.069") Mounting Tube 915 (36") length, Ø 78 (3.069")
32 Clamps AFTE480 Parallel Clamp Narrow Bar Clamp Right Angle Clamp Base Clamp Swivel Clamp Bar Clamp Base Clamp Adjustable Bar Clamp Mounting Tube Tubing is of the same outside diameter as the auto feed unit and is available in the following standard lengths. AFTE480 ACCESSORIES Parallel clamp Righ Angle clamp Swivel clamp Bar clamp Base clamp Adjustable bar Clamp Narrow bar Clamp Mounting Tube 305 (12 length, Ø (2.225"-2.233") 9462 Mounting Tube 457 (18") length, Ø (2.225"-2.233") 9472 Mounting Tube 610 (24") length, Ø (2.225"-2.233") 9482 Mounting Tube 760 (30") length, Ø (2.225"-2.233")
33 Notes
34 34
35 GRE_10331_DESOUTTER-AFD-accessories_EF 11/04/11 17:55 Page35 AFD Selection Program The Desoutter AFD selection program allows you to select Auto Feed Drills or Tappers for applications where the following parameters are available: Hole diameter or thread size Hole or thread depth Thread pitch (tapping only) Number of holes Material to be drilled or tapped Blind or through hole (tapping only) For further details please contact your local Desoutter representative. CAD drawing files for the Desoutter Auto Feed Drills and Tappers are available on For more information about Desoutter tools, please ask for the Desoutter catalogue or visit and look in the Industrial Tools on line catalogue
36 More Than Productivity English Copyright 2016 March Issue 2
Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationPneumatic Torque Motors
Pneumatic Torque Motors Contents and Torque Motor Selection Contents Torque Motor Selection... page 2 Torque Controlled Shut Off... page 4 SC Series... page 4 SD Series... page 6 F Series... page 8 Accessories...
More informationAIR MOTORS. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
AIR MOTORS 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
More informationPneumatic Torque Motors
Pneumatic Torque Motors Contents and Torque Motor Selection Contents Torque Motor Selection... page 2 Torque Controlled Shut Off... page 4 SC Series... page 4 SD Series... page 6 F Series... page 8 Accessories...
More informationAir Motors. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
Air Motors 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
More informationAutomatic Machining Tools
Automatic Machining Tools ARO AMT Catalog_new_BW.qxd:20001893 Catalog 9/17/07 6:15 PM Page 1 Table of Contents Numerical Model Index...2 Tool Selection...4 ARO Automatic Machining Tools...5 Electric/Pneumatic
More informationAir Motors to 3.9 hp (0.16 to 2.9kW) Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
Air Motors 0.21 to 3.9 hp (0.16 to kw) Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating
More informationAIR MOTORS. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
AIR MOTORS 60 W to 900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
More informationCOST-EFFECTIVE AUTOMATION COMPACT UNITS FOR
COST-EFFECTIVE AUTOMATION COMPACT UNITS FOR DRILLING TAPPING MILLING www.esystems.com You will find units for Drilling, Tapping and Milling installed wherever increased rates of production are required.they
More informationUniversal. CNC Turning machine TNA500 TNA600
Universal CNC Turning machine TNA500 TNA600 TRAUB TNA this name is highly regarded throughout the world for machining large chuck, shaft or bar parts. With their precision and efficiency, short setup time
More informationcost-effective automation
cost-effective automation compact units for drilling tapping milling www.e2systems.com AIR HYDRAULIC DRILLING UNIT BE(FP)22 AIR HYDRAULIC DRILLING UNIT BE(F) 22 The basic design of the BE(F) 22 consists
More informationAutomatic Drilling and Tapping Units
Automatic Drilling and Tapping Units Contents Page Automatic drilling and tapping units... 25 Dimension sketches... 23 Introduction More mechanization in your drilling operations Simple and cost effective,
More informationSELF-FEED DRILL UNITS MK III BROOMATIC SALES/ENGINEERING FEATURES
SELF-FEED DRILL UNITS MK III BROOMATIC SALES/ENGINEERING FEATURES The Building Blocks of Low Cost Drilling and Tapping Automation Table of Contents PAGE 1 FIG. 1 PNEUMATIC MK III WITH STANDARD 3/8 CAPACITY
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationMO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
More informationSpecial Applications Require Special Tools
Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110
More informationADVANCED LINE. All airmotors can also be used without lubrication.
Screwdriving technology Automation Air motors Air tools ADVANCED LINE Stainless Steel Air s from 20 W / 0.03 Hp up to 1.2 kw / 1.6 Hp NEW MOTOR RANGE High torque motors made from stainless steel: Our ADVANCED
More informationFTP Series HIGH FORCE ELECTRIC PRESS ACTUATOR
FTP Series HIGH FORCE ELECTRIC PRESS ACTUATOR Ideal hydraulic press replacement Industry-leading power density Rugged and reliable Flexible and precise 952.500.6200 www.exlar.com 75 FTP Series High Force
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationManual. Pneumatic Drilling Unit Series BEP 22 SK. Read this manual before installation and commissioning of the product. Keep for future reference.
EN Manual Pneumatic Drilling Unit Series BEP 22 SK Read this manual before installation and commissioning of the product. Keep for future reference. MAN027 - Manual BEP 22 SK, EN, Rev. 01.doc Table of
More informationComponents for Machine Building. Power Feed Units
Components for Machine Building Power Feed Units Standard and Custom Components to Fit Your Needs Exactly If you re building equipment to drill, tap, chamfer or thread, Hause Machines can help you create
More informationStraight Drills. ergonomic optimum power-to-weight ratio simple operation high variability, customer-specific solutions
Screwdriving Technology Automation Air Motors Air Tools Straight Drills ergonomic optimum power-to-weight ratio simple operation high variability, customer-specific solutions Our line of drills are especially
More informationSelection guide for drills
CAT_BOSCH_2011-02_EN_bosch_production-tools_catalogus_Pneumatic-Tools-for-Industry_Boormachines pagina 1 van 9 6 Drills and rotary hammer Air Tools for Industry Selection guide for drills Choosing a drill
More informationHigh-performance products. Designed for you!
High-performance products. Designed for you! Impact Wrenches CP6748EX-P11R ATEX Art nr 6151590570 CP6768EX-P18D ATEX Art nr 6151590580 CP6778EX-P18D ATEX Art nr 6151590590 Dust-proof (IP6) and ATEX certified
More informationPeck Feed Drills ADVANCED DRILLING EQUIPMENT 3-1 SP EN M
Peck Feed Drills ADVANCED DRILLING EQUIPMENT SP-1300-3-EN-0806-.25M 3-1 Introduction Peck Feed Drills Our peck feed drills are a unique category unto themselves. These drills drill a short distance, then
More informationPERFORMANCE AND SPECIFICATION. BORING DIAMETER RANGE 1.5 to 24 BORING BAR STROKE 305, 610 or 915mm 12, 24, or 36
MLB610 Line Boring Machine Rev 1.0 Page 1 of 9 DESCRIPTION A versatile and modular line boring machine offering a choice of electric, hydraulic and pneumatic boring bar drive motors, with a mechanical
More informationStraight Line Action Clamps
Straight Line Action Clamps Sizing and Application Chart Click Page # View N [lbf.] mm [inch] Series Page MC-SLA-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 5000
More information2666:- 1/2 5095:- 3/4 5095:- 1
2666:- 1/2 5095:- 3/4 5095:- 1 ATEX CP6748EX 1/2 ATEX CP6768EX 3/4 ATEX CP6778EX 1 The Best 1/2 Art Nr 6151590570 WORKING TORQUE (FWD) 180-760 Nm MAXIMUM TORQUE (REVERSE) 1085 Nm FREE SPEED 8400 rpm WEIGHT
More informationHow to select your fastening screwdrivers?
Fastening Pistol shape for horizontal applications or for better controllability Straight shape for vertical applications How to select your fastening screwdrivers? Clutch Type IMPACT (rocking dog) Good
More informationSIOUX TOOLS FORCE PRODUCT CATALOG DRILLS
SIOUX TOOLS FORCE PRODUCT CATALOG DRILLS Drills Index Pistol Grip................................... 9 Inline................................... 9-10 Right Angle................................ 10 Drill
More informationIn-Line Positive Feed Tools
In-Line Positive Feed Tools ADVANCED DRILLING EQUIPMENT SP-1300-1-EN-0806-.25M 1-1 Introduction In-Line Positive Feed Tools How Positive Feed Drills Operate Our in-line positive feed drills use two interconnected
More informationFastening Tools Lou Zampini & Associates
Fastening Tools Safety Instructions and Contents Specific Safety Instructions for Power Tool Groups In addition to the General Safety Instructions, the following are safety instructions and warnings that
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More information9500:- SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER. CP AA5VK Art nr SPECIAL OFFER OFFER. People. Passion. Performance.
SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER 9500:- P remium Tool CP3650-120AA5VK Art nr 6151607180 Spindle thread:...m14 Wheel size:...125 mm Power:...1700 W Free speed:...12000 rpm Length:...238
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationManual. Air-hydraulic Drilling Unit Series BE 33. Read this manual before installation and commissioning of the product. Keep for future reference.
EN Manual Air-hydraulic Drilling Unit Series BE 33 Read this manual before installation and commissioning of the product. Keep for future reference. MAN045 - Manual BE 33, EN, Rev. 02.doc Table of content:
More informationUniport CNC Portal Machining Centre with Pallet Changer.
Uniport 6 CNC Portal Machining Centre with Pallet Changer www.unisign.nl Uniport 6 UNISIGN The economical solution to flexible manufacturing! Since the introduction of the UNIPORT portal machining centres,
More informationTWS-N - HYDRAULIC TORQUE WRENCHES - SQUARE DRIVE
TWSN HYDRAULIC TORQUE WRENCHES SQUARE DRIVE Working pressure 00 Bar Compact, lightweight, aluminium construction TWS00N itted with 60 UniSwivel quick release couplings TWS0N Hiorce TWSN series lightweight
More informationELECTRIC POWER TOOLS SIM180
New Products ELECTRIC POWER TOOLS SIM180 7 Polisher SIM115 4 1 / 2 Angle Grinder Voltage - 230v Frequency - 50hz Rated Power - 1300w Electronic Speed Control Maintains Constant Speed Under Load Soft Start,
More informationPneumatic spindles Pneumatic built-in motors
Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial
More informationI.T TMY-B* series 11 TURN-MILL TURRET WITH Y-AXIS (PATENTED) TECHNICAL INFORMATION ISSUED
TMY-B series 11 TURN-MILL TURRET WITH Y-AXIS (PATENTED) TECHNICAL INFORMATION I.T. 6471 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 03-09 / series 11 MAIN
More informationGMS SERIES Tool Spindle Type 5-axis Turning Centers
GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide
More informationCNC swiss and non-swiss. turning center TNL32
CNC swiss and non-swiss turning center TNL32 Thanks to the outstanding technical features of the TRAUB TNL32 CNC swiss and non-swiss turning center, you will notice measurable improvements in production.
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationGTH-2600 SERIES PARALLEL TWIN-SPINDLE CNC TURNING CENTER
GTH-2600 SERIES PARALLEL TWIN-SPINDLE CNC TURNING CENTER PARALLEL TWIN-SPINDLE CNC TURNING CENTER With leading technology and high quality components, the GTH series is particularly developed for automobile
More informationI.T MDT * series 20 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 5480 / 5482 COUPLING TECHNICAL INFORMATION ISSUED
series 2 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 548 / 5482 COUPLING TECHNICAL INFORMATION I.T. 6486 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED
More informationStands. MC55 Cylinder-Operated Stand With Linear Bearings. R55-S Lever-Operated Stand. D54 Lever-Operated Stand For SD, DM6, 2DM6 Motors
Stands MC55 Cylinder-Operated Stand With Linear Bearings Part No. 902914 Weight: 70.4lb (32kg) Max. Stroke: 4 in. (100mm) Max. Mounting Plate Load: 150lb (68kg) 8.66 9.84 40.16 7.05 25.43 Max approx. 1.57
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationw w w. j y o t i. c o. i n Performance Series Vertical Machining Center
w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds
More information3260:- 1/2 6220:- 3/4 6220:- 1
3260:- 1/2 6220:- 3/4 6220:- 1 ATEX CP6748EX 1/2 ATEX CP6768EX 3/4 ATEX CP6778EX 1 The Best 1/2 Art Nr 6151590570 WORKING TORQUE (FWD) 180-760 Nm MAXIMUM TORQUE (REVERSE) 1085 Nm FREE SPEED 8400 rpm WEIGHT
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationAir vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationFDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)
Bulletin FDXS-09 Features 1. Magnetic piston is standard in all sizes. 2. Non-rotating design enables precision positioning. ng. 3. Compact design saves space. 4. Suitable for multi-axis assemblies and
More informationPULLERS & SEPARATORS
Workshop Solutions PULLERS & SEPARATORS INTRODUCTION Sykes-Pickavant has been at the forefront of providing specialist Workshop Solutions for Industry, for more than 75 years, and this latest catalogue
More informationThis catalog has not been updated. Although the information contained is helpful, please reference for current information
This catalog has not been updated. Although the information contained is helpful, please reference www.aaaproducts.com for current information Continue below for Catalog Content PREMIUM QUALITY UNSURPASSED
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationVarious duties efficiently solved EMCOMAT E-300 E-360 E-400. [ means:
[ E[M]CONOMY] means: Various duties efficiently solved EMCOMAT E-300 E-360 E-400 Cycle-controlled lathes with high-powered cutting performance and maximum precision EMCOMAT E-300 [Headstock] - Siemens
More informationSIOUX TOOLS INDUSTRIAL CATALOG DRILLS DRILLS. Index Drills Drill Accessories... 19
SIOUX TOOLS INDUSTRIAL CATALOG DRILLS DRILLS Index Drills.... 12 18 Drill Accessories.... 19 9 10 DRILLS SIOUX TOOLS INDUSTRIAL CATALOG DRILLS Performance, Serviceability, Ergonomics and Value 1 3 Light
More informationExtremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
More informationConversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More informationUniversal basic turning centres for a broad range of manufacturing CLX series CLX 350 CLX 450
www.dmgmori.com CLX 350 CLX 450 Universal basic turning centres for a broad range of manufacturing Machine highlights Modularity Ì Technology and applications Ì Customization and solutions Ì Control technology
More informationturning centers Haas Automation Inc. TURNING CENTERS
All New turning centers The New Generation Haas turning centers are the culmination of 15 years of continuous development, and they offer the most performance for the money the best value of any turning
More informationHigh torque stainless steel motors ADVANCED LINE. Stainless Steel Air Motors from 20 W / 0.03 Hp up to 1.2 kw / 1.6 Hp
Screwdriving technology Automation Air motors Air tools ADVANCED LINE Stainless Steel Air s from 20 W / 0.03 Hp up to 1.2 kw / 1.6 Hp NEW MOTOR RANGE High torque motors made from stainless steel: Our ADVANCED
More informationDotco Drill Specifications
Dotco Drill Specifications Speed Drill Diameter Type Weight Length Head Height Drill Chuck rpm (Capacity) (Housing) kg mm mm Size Air Inlet NPT Series 15LF straight - (300 Watt) 15LF081-38+ 5300 1/4" C
More informationPRODUCT GUIDE BROBO GROUP. brobo.com.au. All Brobo Machines & Parts include a 2 year Warranty. Certified System. Quality ISO 9001 AND OWNED
A L I F E T I M E O F R E L I A B I L I T Y PRODUCT GUIDE BROBO GROUP AND OWNED Certified System Quality ISO 91 TM All Brobo Machines & Parts include a 2 year Warranty S315D, S35D & S4B FERROUS METAL CUTTING
More informationUCC Series Co-Axial Drive Pneuma-Hydraulic
UCC Series Co-Axial Drive Pneuma-Hydraulic 40mm - 200mm bore sizes Features Co-Axial Drives (UCC) consist of two integral elements; a pneumatic drive unit to provide power and an integrated, closed circuit
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationMPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with
More informationQuick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm Collet size: 6mm (1/4")
JTC-3101 M INI AIR DIE GRINDER JTC-3321 SPOT WELD CUTTER KIT JTC-3401 1/2" HEAVY DUTY AIR M INI IM PACT WRENCH Free speed: 25000 rpm Quick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationTyphoon L Series CNC Turning Centres
Typhoon L Series CNC Turning Centres www.colchester.co.uk Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal
More informationINTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
More informationPneumatic spindles Pneumatic built-in motors
Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial
More informationConventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 20 D. Universal lathes with toolmaking precision for industrial applications
Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 2 D Universal lathes with toolmaking precision for industrial applications EMCOMAT 14 S/14 D EMCOMAT 17S/17D/2D The Technology The EMCOMAT 14 S/14
More informationMini slides SLTE, electric
Key features Range of applications Special features The electric mini slide SLTE is ideal for use in automation applications where controlled end-position cushioning (gentle stopping), constant travel
More informationV SWISS MADE LINEAR TECHNOLOGY
Excerpt from main catalogue inear modules V 11-15 SWISS MDE INER TECHNOOGY ine Tech inear modules Table of contents Product overview 6 7 Design fundamentals / ubrication / Maintenance 8 Profile cross-sections
More informationVARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY.
PM4200 MILLING MACHINE VARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY. Quality Machine Design with Power-Packed Performance Precision machined dovetail ways and adjustable gibs
More informationSeries. High performances Vertical machining centre. Performance Technology Power Accuracy
Series High performances Vertical machining centre Performance Technology Power Accuracy Series Powerful, Rapid, Accurate High Performance Vertical Machining Centre The VX range of vertical machining centres
More information26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.
60, 60, 8007 For single- and double-acting drives /, / and / Directional Control Valves Modular NAMUR design Actuation: Electromagnetic Indirectly controlled spool valves Connections G /8, G /, / NPT Standard
More informationTap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
More informationDouble Column Machining Center VM3018A With FANUC 0i MF LINEAR GUIDE WAY ON ALL THREE AXIS
Offer date:2017/2/8 Quotation No.VM3018AFMF20170208A Double Column Machining Center VM3018A With FANUC 0i MF LINEAR GUIDE WAY ON ALL THREE AXIS Stock Machine for Index: A.) General Machine Description
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
More informationManual. Air Operated Drilling Unit Series BE 21. Read this manual before installation and commissioning of the product. Keep for future reference.
EN Manual Air Operated Drilling Unit Series BE 21 Read this manual before installation and commissioning of the product. Keep for future reference. MAN033 - Manual BE 21, EN, ORIGINAL Rev. 03.doc 2 DECLARATION
More informationVarious duties efficiently solved EMCOMAT E-360 E-400. Cycle-controlled lathes with high-powered cutting performance and maximum precision.
Various duties efficiently solved EMCOMAT E360 E400 Cyclecontrolled lathes with highpowered cutting performance and maximum precision Turning emco world.co m EMCOMAT E360, E400 You will find the right
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationSLUGGER CUTTERS Airforce 35. Airforce 45
Airforce 35 A compact pneumatic drill ideally suited to space restricted and hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry. Combining a
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationScrewdrivers - Shut off - Push start
Screwdrivers - Shut off - Push start 0.09 to 16 Nm (0.8 to 142 in.lb) - 320 to 3500 rpm B C D E F Model ø mm (in.) ø B mm (in.) L mm (in.) 289.. 27 (1.06) 178 (7) SB.. 32 (1.26) 36 (1.42) 197 (7.76) SC2
More informationTyphoon B Series CNC Turning Centres
Typhoon B Series CNC Turning Centres www.colchester.co.uk Typhoon B Series CNC Turning Centres The Typhoon B Series constructed from a one piece cast, base incorporates FEM analysis to achieve an optimal
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationADVANCED LINE. NEW MOTOR RANGE non corrosive ATEX conform oil-free sealed sterilisable compact insensitive to cleaning solvents
Screwdriving technology Automation Air motors Air tools ADVANCED LINE Stainless Steel Air s from 20 W / 0.03 Hp up to 1.2 kw / 1.6 Hp NEW MOTOR RANGE non corrosive ATEX conform oil-free sealed sterilisable
More informationElectric Mini Slides MSC-EL
Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6
More informationU-CENTER. NC heads for facing, boring, threading and radiusing for machining centres
U-CENTER NC heads for facing, boring, threading and radiusing for machining centres 8 U-CENTER General features o + 4 1 A U-CENTER U-CENTER boring and facing heads are designed for use on machines with
More informationIndustrial. Ready when you are. RediPower. Tools
RediPower Industrial Tools Ready when you are RediPower Ready when you are Available, cost effective, and durable are recognized attributes of the RediPower products. Since their introduction in the mid
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191
More information