POWER BROOM PARTS CATALOG MODEL 1305BR SERIAL NUMBER AND ABOVE

Size: px

Start display at page:

Download "POWER BROOM PARTS CATALOG MODEL 1305BR SERIAL NUMBER AND ABOVE"

Hannah Patterson
6 years ago
Views:

1 POWER BROOM PARTS CATALOG MODEL 0BR SERIAL NUMBER 000 AND ABOVE Turf Teq LLC PC0BR--0--0

2 Contents Part Number Page Number Sector A Engine A Lift Arm A Hydro Handle A K Transmission A Tractor Frame/Trans A Tractor Controls A... 0TR/ Tractor with Diff-Loc A... BR Gearbox A... BR Idler Arm A... 0 BR Brush A... BR Lid & Latch A... BR Carrier Frame A... BR Caster Wheel A... A00B/BR Broom Attachment A... BR Lift Linkage A... 0BR/BR Broom/Tractor Connecting A... K0PB/ Park Brake Kit A... K0WL/ Wheel-Loc Kit A... K0DL/ Differential-Loc Kit A... 0 K0LK/ Broom/Edger Lift Kit A...

3 Torque to ft. lbs. Torque to ft. lbs. Grease. Ream Out To.00/.00 DIA. After Installation. Apply Loctite Thread Locker. Apply Anti-Seize Lubricant. Tap Threads. (x) (x) (x) (x) Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 (x) 0 (x) (x) (x) (x) (x) BR Sector A Flat Washer / Hex Bolt / x (GR.) Washer Lock Washer / HexBolt/x Jam Nut / Lock Washer / Tap Bolt / x Nut / Lock Washer / Hex Bolt / x / Hex Bolt / x. Nut / Lock Washer / Flat Washer / HexBolt/x/ Lub Fitting / Bushing Support WA Stop WA Compression Spring Sector WA Pivot WA Frame WA Date:

4 TOP VIEW Apply Anti-Seize Lubricant. Apply Loctite Threadlocker. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL Engine A Nut / Hex Bolt / x.0 Washer Machine.0 x. x.0 Keyway / x. HexBolt.x.0(Gr.) Fine Thread Clutch A with Washer Sheave ( dia.) Honda Engine GXV0DA Date:

5 Apply Anti-Seize Lubricant. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Lift Arm A Lub Fitting Cotter Pin / x Cotter Pin / x / Washer / Machine. x. x.0 Washer / SAE. x.0 x.0 Rod Handlegrip ( dia.) Handle WA Lift Link WA Date:

6 Apply Anti-Seize Lubricant. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 0 Hydro Handle A Washer / USS / x -/ x.0 Lock Washer / Washer / USS /x/x.0 Carr.Bolt/x Decal -- Travel Speed Spacer T--Knob Rod WA Yoke End Handle Date:

7 0,, 0, Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0, BR K Transmission A Oil Inlet O-Ring Oil Inlet O-Ring Differential Lock Lever O-Ring Drain Plug Spring Lock Retaining Pin Hydro Release Lever Metric Spring Pin m x m Lock Nut M0 x.0 Nut / Lock Washer / HexBolt/x/ / Worm Gear Clamp Spring / dia. x. Arm WA Arm WA Rubber Hose.0 x 00 CC Reservoir Reservoir Filter Reservoir Cap Washer. x. x.0 Pully (. dia.) Fan ( dia.) K Transmission Date:

8 (Ref.) Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Tractor Frame/Trans A 0 Apply Loctite Thread Locker If needed install # washer (as many as required after # v-belt has been installed and tightened.) Tighten # carr. bolt after # v-belt has been installed and tightened Hex Bolt / x -/ Carr.Bolt/x Mount Lock Nut / Nut / Washer / SAE Lock Washer / Hex Bolt / x Hex Bolt / x Hex Bolt / x -/ Hex Bolt / x Hex Bolt / x / Fine Thread Link Engine A V-Belt (A--) Stiffener LH Stiffener RH Handlebar WA K Transmission A Date:

9 0 (Supplied with Throttle Cable item # ) Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Tractor Controls A Clutch Cable Spring Hose Clamp -- Screw Lock Nut / Nut / Lock Washer / Washer / SAE. x. x.0 Hex Bolt / x -/ Hex Bolt / x -/ Carr.Bolt/x/ Hex Bolt / x Turf Teq Super Pivot Decal Decal -- Throttle Decal -- Warning Hairpin.0 x. Self Tapping Hex Screw / x / Gas Cap Nut #0 Lock Washer #0 Washer #0 SAE. x. x.0 Pan Head Machine Screw #0 x / Hydro Handle A Throttle Control Handle Throttle Control Lever A Bracket RH Link WA ClevisPin/x Bracket LH E-clip (/ shaft) Plate Decal -- Blade Control Decal -- Swing Release Handle Grip Trigger WA Decal -- Forward / Reverse Clutch Handle WA Control Cable A Hold Down WA Fuel Tank A Fuel Hose Tractor Frame/Trans. A Date:

10 0 (Not Shown) ForAssemblyReferto Page, Differential-Loc Kit A Apply Anti-Seize Lubricant. Revisions /0 JRD MODEL 0 Diff-Loc Control Arm Note: Remove Spring TOP VIEW Transmission & Wheel A Notes: Includes Diff-Loc Kit. Does Not Include Wheel-Loc Kit. All hardware is Grade, plated and course thread unless otherwise specified Tractor with Diff-Loc A Hex Bolt / x / Key/x. Cotter Pin / x -/ Cotter Pin / x / E-Clip Lug Nut / Fine Thread Washer Machine Washer SAE Washer / SAE Lock Washer / Shield Spacer Wheel Hub K0DL Diff-Loc Kit Spacer Handle Tire & Rim A Link WA Tractor Controls A Date: TR/0-0

11 Apply loctite threadlocker to all set screws. Apply anti-seize lubricate. If vendor shipped gearbox with an aluminum dust shield remove it and discard. Apply teflon tape or teflon sealant after plug removal. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL BR BR--00 Gearbox A Oil Fill Plug Setscrew / x / Key/x.0 Setscrew / x / Drive Pulley WA Gearbox Sprocket WA Date: 0--0 BR -0

12 Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Idler Arm A BR--00 Jam Nut / Lock Washer / Washer / Machine /x.0x.0 Washer / SAE /x.x. HexBolt/x-/ Flanged Idler Arm WA Date: 0--0 BR -0 0

13 Apply Anti-Seize Lubricant. Emery cloth shaft to remove plating. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL BR--00 BR--000 BR--0 BR--000 BR--00 BR--00 Brush A Hex Bolt / x -/ Nut / Lock Washer / Washer / SAE / x. x / Hex Bolt / x. Hex Bolt / x / Spacer / x / x / Ring WA Brush A (Optional poly &wire) Brush A (Standard poly) End Plate Drive Shaft WA Date: 0--0 BR -0

Revisions /0 JRD MODEL 0 0 Lid & Latch A 0--0 BR--00 0--0 0-- 0--0 BR--00 BR--00 BR--00 BR--00 Jam Nut / Lock

14 Tap-out threads & apply anti-sieze lubricant. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 0 Lid & Latch A 0--0 BR BR--00 BR--00 BR--00 BR--00 Jam Nut / Lock Washer / Washer / HexBolt/x. Nut / Lock Washer / Washer / Carr Bolt / x. Decal -- belt conf. Decal -- Warning Decal (Broom) Decal -- Danger Ext. Spring / x length x/wire Latch LH WA Latch RH WA Lid WA Date: 0--0 BR -0

15 0 Apply anti-seize lubricate BR--00 BR--0 BR--0 BR BR BR--0 BR--00 BR BR BR--00 BR--0 BR--0 BR--0 Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Carrier Frame A Ream bushings after assembly. Apply grease after assembly Washer / SAE Lub Fitting Cotter Pin / x -/ Jam Nut / Nut / Lock Washer / Washer / Washer / Machine / x.0 x / Hex Bolt / x. Lock Nut / Carr Bolt / x. Nut / Lock Washer / Hex Bolt / x / Hex Bolt / x V-Belt (B--) Nut / Lock Washer / Washer / Hex Bolt / x Idler Arm A Washer / x. x / Decal (spring release) Flat Idler Spacer / x. x. length Spacer / x / x. length Bumper Flat Spring Handle Arm WA Drilled Bolt Bushing Caster Wheel A Gearbox A Carrier Frame WA Date: 0--0 BR -0

16 Wheel must spin freely. Remove plating on shaft only. Apply grease. Emery cloth shaft to remove plating. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL BR--00 BR--00 Caster Wheel A Lock Nut / HexBolt/x Caster WA Wheel ( dia. x width) Date: 0--0 BR -0

17 Apply loctite threadlocker to lock collar set screw. Apply anti-seize lubricate BR--0 BR--0 BR--0 BR--00 BR--00 BR--00 ref BR--00 BR BR BR--0 BR--0 BR--00 BR--00 BR--0 Tap-out threads. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Broom Attachment A REF Washer / Machine / x. x / Nut / Lock Washer / Washer / Carr Bolt / x Lock Nut / Washer / HexBolt/x Nut / Lock Washer / Washer / Hex Bolt / x. Hex Bolt / x / Hex Bolt / x / RC--0 Connecting Link (service only) Carrier Frame A Spacer / x. x. length Sprocket Idler Stop WA Flangette Lock Collar --Supplied w/brg BR--00 Bearing & Lock Collar Roller Chain A (RC--0) (. ) Shield Knob Shield WA Snapper Pin Lift Linkage A Lid & Latch A Cover Brush Frame WA Brush A Complete With Shaft Date: 0--0 A00B/BR -0

18 Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions MODEL 0 BR--00 BR--00 BR BR--000 Lift Linkage A Washer / Washer / Knob Spring Link WA Grip Lift Arm WA Date: BR -0

19 .. 0 & Revisions /0 JRD Factory setting (Set at. with broom in the down position.) Note: All hardware is Grade, plated and course thread unless otherwise specified. MODEL 0 0 REF 0-- BR BR--0 Broom/Tractor Connecting A HexBolt/x-/ Lock Washer / HexBolt/x. Washer / SAE Nut / Lock Washer / Hex Bolt / x. Washer / x.0 x. 0TR Tractor with Diff-Loc A Broom Attachment A Date: BR/BR -0

20 Optional Equipment Apply Anti-Seize Lubricant. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL Park Brake Kit A Decal Plate Cotter Pin / x / Nut / Lock Washer / HexBolt/x Base WA Handle Grip Lever WA Date:0 --0 K0PB/0-0

21 NOTE: The longest threaded rod on # Wheel-Loc Hub, goes through this hole on # Plate WA. 0 0 Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Optional Equipment K Transmission (REF.) TOP VIEW Wheel-Loc Kit A Bushingx.x Key/x. E--Clip Washer Machine x.x.0 Washer SAE Lock Washer / Washer / Machine /x/x.0 Jam Nut / Fine Thread Lug Nut / Fine Thread Spacer Spring C-- Engagement WA Spacer Wheel Engagement Hub WA Plate WA Spacer Wheel-Loc Hub Date: 0--0 K0WL/0-0

22 0 Install nut so there is / gap between 0 and. Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL Optional Equipment 0 Note: s,,,,,, and are standard on all machines and are not part of the optional kit Differential-Loc Kit A Lock Nut / Jam Nut / Nut / Lock Washer / Washer / Machine /x/x.0 Hex Tap Bolt / x Nut / Lock Washer / Washer / SAE Nut / Lock Washer / Washer / SAE Hex Bolt / x. Carr Bolt / x Hex Bolt / x Eyebolt / x Spring Spacer Decal Mount WA Arm WA Bushing Decal Arm WA Date:--0 K0DL/0-0

23 (Ref. only) 0 Supplied With Lift Arm ( #). Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions /0 JRD MODEL 0 Broom/Edger Lift Kit A Cotter Pin / x -/ Cotter Pin / x / Washer / SAE. x. x.0 Nut / Lock Washer / Washer / SAE Hex Bolt / x End Plug Lift Arm WA Lift Arm A Date: 0--0 K0LK/0-0

POWER RAKE PARTS CATALOG MODEL 1305PR SERIAL NUMBER AND ABOVE

POWER RAKE PARTS CATALOG MODEL 0PR SERIAL NUMBER 000 AND ABOVE Turf Teq LLC PC0PR--0--0 Contents Part Number Page Number 0--0... Sector A... 0--0... Engine A... 0--0... Hydro Handle A... 0--0... K Transmission