Air Powered Double Diaphragm Pumps
|
|
- Donald Carson
- 5 years ago
- Views:
Transcription
1 Air Powered Double Diaphragm Pumps
2 Notes.
3 TC-X 030 Series Standard Diaphragm Pumps with 1/4" Connections Liquid Flow Rate: Maximum Air Inlet Pressure: Wetted Body Material Options; 1 to 8 L/min. (2.14 GPM) Flat Valve = 0 mm. 0.7 MPa (100 PSI) Ryton Air Motor (PPS), Looped C Spring Air Spool, Flat Check Valves, Side Port Liquid Connections. Internal Silencer. Fully Bolted Body. ¼" Threaded Connections PT. PVDF, PTFE. (For PTFE > Refer to the TC-X030TT Series). Diaphragm / Check Valve Materials: PTFE for all models. Certification: CE. ATEX. Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. Bolt Caps. Notes: New pump series. Very low flow rates. Available in PVDF. Very Compact size. New footprint. Grease or oil Lubrication is not necessary during normal operation. Also available with NPT connections. PVDF Model > TC-X030VT
4 TC-X 050 Series Standard Diaphragm Pumps with 1/4" Connections 1 to 11.5 L/min. (3.1 GPM) Flat valve = 0 mm. Maximum Air Inlet Pressure: 0.7 MPa (100 PSI) Maximum Dry Suction Lift: 1.5 m (5 Feet) Discharge Volume: 35 cc Per Cycle 400 Cycles per minute Ryton Air Motor (PPS), Looped C Spring Air Spool, Flat Check Valves, Side Port Liquid Connections. Internal Silencer. Fully Bolted Body. PP model with Multiport connections as standard. ¼" Threaded Connections. PT Wetted Body Material Options; PVDF. PPG. POM. Al. SUS. PP. PPC, PTFE. (For PTFE refer to the TC-X030TT Series). Diaphragm / Check Valve Materials: PTFE for all models. Certification: CE. ATEX. (Some models) FDA. (Some Models) Common Pump Options: Ball check valve Pump for Liquid Solids handling. (BV) FDA Pump Series (SUS Models). Drum Pump Series. (D) Multiport Connections. (MP) Split Inlet Manifolds (I) Split Discharge Manifolds (O) Split Suction & Discharge manifolds (Z) Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. Notes: Available in all materials. Very Compact size. Lubrication not necessary. Also available with NPT connections. SUS > TC-X050ST-MP PPG > TC-X050PT AL > TC-X050AT PVDF > TC-X050VT-MP Pure PP > TC-X050PT-PP POM > TC-X050DT
5 TC-X 100 Series Standard Diaphragm Pumps with 3/8 Connections Maximum Air Inlet Pressure: 1 to 19 L/min. (5.7 GPM) 1.0 mm 0.7 MPa (100 PSI) Aluminium Air Motor, Spring-Less Air Spool, Ball Check Valves, Centre Port Liquid Connections. External Silencer. Fully Bolted Body. PP model with Multiport as standard. PP model with Multiport connections as standard. 3/8 Threaded Connections. PT Wetted Body Material Options; PPG. & PP. Diaphragm / Check Valve PTFE. CR. EDPM. NBR. TPEE. TPO. Materials: Certification: CE. Common Pump Options: PTFE Ball Valve Set PTFE coating for Air motor section MP Multi port Connections Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. High Performance Muffler. Speed Control Muffler Notes: suitable for frequent start stop, dead head & high back pressure type applications. Available in PPG and new PP body materials. Lubrication not necessary during normal operation. Also available with NPT connections. PPG > TC-X100PT Pure PP > TC-X100PT-PP
6 TC-X 101 Series Standard Diaphragm Pumps with 3/8 Connections 1 to 22 L/min. (6 GPM) 1.0 mm Maximum Air Inlet Pressure: 0.7 MPa (100 PSI) Maximum Dry Suction Lift: 3 m (10 Feet) Discharge Volume: 76 cc per cycle 300 Cycles Per minute Aluminium Air Motor, Spring-Less Air Spool, Ball Check Valves, Multi Port Liquid Connections. External Silencer. Fully Bolted Body. 3/8 Threaded Connections. PT Wetted Body Material Options; Al. & SUS. Diaphragm / Check Valve Materials: PTFE. CR. EDPM. NBR. TPEE. TPO. Certification: CE. ATEX. FDA. (SUS Models) Common Pump Options: FDA Pump Series (For SUS Pumps). Drum Pump Series. (For Aluminium or SUS Pumps) ½ Centre Port Connections. SUS Balls Kit (For Aluminium or SUS Pumps) SUS Seats Kit (For Aluminium Pumps) SUS Guides Kit (For Aluminium Pumps) PTFE Coating for air motor section Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. High Performance Muffler. Speed Control Muffler Notes: suitable for frequent start stop, dead head & high back pressure type applications. Available in aluminium and stainless steel body materials. Multi-port liquid connection options. Various diaphragm materials. Compact size. Oil or grease lubrication is not necessary during normal operation. Also available with NPT connections. AL > TC-X101AN SUS > TC-X101SS
7 TC-X 102 Series Standard Diaphragm Pumps with 3/8" Connections Maximum Air Inlet Pressure: 1 to 22 L/min. (6 GPM) 1.0 mm 0.7 MPa (100 PSI) Ryton Air Motor (PPS), C-Spring Air Spool, Ball Check Valves, Side Port Connections. External Silencer. Fully Bolted Body. Wetted Body Material Options; Diaphragm / Check Valve Materials: Certification: Common Pump Options: 3/8" Threaded Connections. PT PPG. PTFE. CR. EDPM. NBR. TPEE. TPO. CE. PTFE Ball Valve Kit. Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. High Performance Muffler. Speed Control Muffler Notes: available only in PPG. Chemically resistant air section (PPS). Compact size. Lubrication not necessary during normal operation. Old model however still available for sale. Also available with NPT connections. PPG > TC-X102PT
8 TC-X 150 Series Standard Diaphragm Pumps with 1/2 Connections 1 to 28 L/min. (7.4 GPM) 1.0 mm Maximum Air Inlet Pressure: 0.7 MPa (100 PSI) Maximum Dry Suction Lift: 3 m (10 Feet) Discharge Volume: 93 cc per cycle 300 cycles per min Aluminium Air Motor, Spring-Less Air Spool, Flat & Ball Check Valves, Side Port Connections. External Silencer. Fully Bolted Body. 1/2 Threaded Connections. PT Wetted Body Material Options; PPG & POM. Diaphragm / Check Valve Materials: PTFE. CR. EDPM. NBR. TPEE. TPO. Certification: CE. ATEX (Some Models) Common Pump Options: Ball Valve Pump Range PTFE Ball Valve Set PTFE Coating for air motor section Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. High Performance Muffler. Speed Control Muffler. Notes: suitable for frequent start stop, dead head & high backpressure type applications. Available in PPG and POM (Atex) body materials. Lubrication not necessary during normal operation. Both ball and flat check valve pumps are available. Also available with NPT connections. POM > TC-X150DT PPG > TC-X150PT
9 TC-X 151 Series Standard Diaphragm Pumps with 1/2" Connections 1 to 51 L/min. ( 13.5 GPM) 1.0 mm Maximum Air Inlet Pressure: 0.7 MPa (100 PSI) Maximum Dry Suction Lift: 2.4 m (8 Feet) Flat valves. 1.5 m (5 Feet) Ball valves Discharge Volume: 128 cc per cycle 400 Cycles per minute Ryton Air Motor (PPS), C-Spring Air Spool, Flat & Ball Check Valves, Side Port Connections. Internal Silencer. Fully Bolted Body. ½ Threaded Connections. PT Wetted Body Material Options; PVDF. PPG. POM. Al. SUS. Diaphragm / Check Valve Materials: PTFE. CR. EDPM. NBR. TPEE. TPO. Certification: CE. ATEX. (Some Models) FDA. (SUS Models) Common Pump Options: Ball check valve Pump Range for Liquid Solids handling. (BV) FDA Pump Series (SUS). Multiport Connections. (MP) Split Inlet Manifolds (I) Split Discharge Manifolds (O) Split suction & discharge manifolds (Z) Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. High Performance Muffler. Speed Control Muffler. Notes: Now superseded by the new D152 Series. However still available and in various materials. Lubrication not necessary during normal operation. Also available with NPT connections. AL > TC-X151AH PPG > TC-X151PT SUS > TC-X151ST PVDF > TC-X151VT
10 TC-X 152 Series Standard Diaphragm Pumps with 1/2" Connections 1 to 60 L/min. (15.9 GPM) 2.0 mm Maximum Air Inlet Pressure: 0.7 MPa (100 PSI) Polypropylene Air Motor (PPG), Looped C Spring Air Spool, Flat & Ball Check Valves, Multi Port Liquid Connections. Internal Silencer. Fully Bolted Body. Multi Footprint options ½ Threaded Connections. PT. PTFE Model also available with Flanges. Wetted Body Options; PP. PVDF. POM. Al. SUS. PPC, PTFE. (For PTFE Refer to TC-X152TT Series) Diaphragm / Check Valve PTFE. CR. EDPM. NBR. TPEE. TPO. Materials: Certification: CE. ATEX. (Some Models) FDA. (SUS Models) Common Pump Options: FDA Pump Series (SUS). Drum Pump Series. (D) Split Inlet Manifolds (I) Split Discharge Manifolds (O) SUS Balls, Seats & Guides kits. Santoprene Back Up Diaphragms for PTFE Fitted Pumps (SB) Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. High Performance Muffler. Speed Control Muffler. External Silencer. Notes: new model available in all materials. Very high flow rates. Large solids size. Low air consumption. Multiport liquid connections. Standardized body dimensions, multi footprint and common connection dimensions. Lubrication not necessary during normal operation. PPG air motor for increased chemical resistance. Also available with NPT connections. Al > TC-X152AN PP>TC-X152PT-PP SUS > TC-X152SS PVDF > TC-X152VT
11 TC-X 202 Series Standard Diaphragm Pumps with 3/4" Connections 1 to 120 L/min. (31.7 GPM) 2.0 mm Maximum Air Inlet Pressure: 0.7 MPa (100 PSI) Maximum Dry Suction Lift: 5.5 m (18 feet) (Rubber Diaphragms) Discharge Volume: Rubber diaphragms 615 cc PTFE diaphragms 539 cc Polypropylene Air Motor (PPG), Looped C Spring Air Spool, Ball Check Valves, Side Port Liquid Connections. External Silencer. Fully Bolted Body. ¾ PT Threaded Connections & DIN Flange Connections. Wetted Body Material Options; PPG, PTFE. (For PTFE refer to the TC-X203TT Series) Diaphragm / Check Valve Materials: PTFE. CR. EDPM. NBR. TPEE. TPO. FPM. Certification: CE. Common Pump Options: PTFE Balls Kit Santoprene Back Up Diaphragms for PTFE Fitted Pumps (SB) Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. High Performance Muffler. Speed Control Muffler. External Silencer. Destroke Cushions. Notes: ¾ Pumps available in PPG with a PPG air motor section for high chemical resistance. Available with threaded or flange connections. Lubrication not necessary during normal operation. Also available with NPT connections. PPG Threaded Connections > TC-X202PT PPG Flange Connections > TC-X202PT-FL
12 TC-X 252 Series Standard Diaphragm Pumps with 1 Connections 1 to 170 L/min. (46.2 GPM) 4.8 mm Maximum Air Inlet Pressure: 0.7 MPa (100 PSI) Maximum Dry Suction Lift: 5.5 m (18 Feet) Rubber fitted. Discharge Volume: 883 cc (Rubber Diaphragm) 787 cc (PTFE Diaphragm) Polypropylene Air Motor (PPG), Looped C Spring Air Spool, Ball Check Valves, Side Port Liquid Connections. External Silencer. Fully Bolted Body. Multi footprint options 1 PT Threaded Connections & DIN Flange Connections. Wetted Body Material Options; PPG, PVDF. Diaphragm / Check Valve PTFE. CR. EDPM. NBR. TPEE. TPO. FPM. Materials: Certification: CE. ATEX (Some Models) Common Pump Options: PTFE Balls Kit Santoprene Back Up Diaphragms for PTFE Fitted Pumps (SB) (TE) PTFE diaphragms with bonded rubber Backup Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. High Performance Muffler. Speed Control Muffler. External Silencer. Destroke Cushions. Notes: 1 Pumps available in PPG & PVDF with a PPG air motor section for high chemical resistance. Available with both threaded or flange connections. Lubrication not necessary during normal operation. Also available with NPT threaded & ANSI Flange connections. PPG Threaded Connections PPG Flange Connections PVDF Flange Connections PVDF Thread Connections TC-X252PT TC-X252PT-FL TC-X252VT-FL TC-X252VT
13 TC-X 253 Series Standard Diaphragm Pumps with 1 Connections 1 to 220 L/min. (58.1 GPM) 6.5 mm Maximum Air Inlet Pressure: 0.2 to 0.7 MPa (30 to 100PSI) Discharge Volume Per Cycle: 800 ml (rubber fitted) 650 ml (PTFE Fitted) Polypropylene Air Motor (PPG), Looped C Spring Air Spool, Ball Check Valves, Multi Port Liquid Connections. External Silencer. Fully Bolted Body. Multi footprint options. Common Dimensions 1 Threaded Connections, PT. PTFE Model also available with Flanges Wetted Body Material Options; Aluminium, Cast Iron, Stainless Steel, PTFE. (For PTFE > refer to TC-X253TT Series). Diaphragm / Check Valve Materials: PTFE. CR. EDPM. NBR. TPEE. TPO. FPM. Certification: CE. ATEX FDA. (SUS Models) Common Pump Options: PTFE Balls Kit FDA Pump Series (SUS Models) Centre Port Connections. 1.5 Centre Port Connections. High Vacuum Guides Kit (HV) Powder Pump Options (PDR) Santoprene Back Up Diaphragms for PTFE Fitted Pumps (SB) (TE) PTFE diaphragms with bonded rubber Backup Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. High Performance Muffler. Speed Control Muffler. Destroke Cushions. Abrasion Pads. Carry Handles. Notes: New 1 Pumps available in Aluminium, Cast Iron, and Stainless Steel. PPG air motor section. New Compact Size. High Flow rates. Large Solids Size. Low air consumption compared to previous models. Multiport liquid connection options. Multi footprint options (6 positions) and common liquid connections. Lubrication not necessary during normal operation. Also available with NPT thread. AL > TC-X253AH SUS > TC-X253ST
14 TC-X 500 Series Standard Diaphragm Pumps with 2 Connections 1 to 730 L/min. (193 GPM) 8 mm Maximum Air Inlet Pressure: 0.1 to 0.85 MPa (123 PSI) on metallic models Aluminium Air Motor Section, Coil-Spring Air Motor, Ball Check Valves, External Silencers (2). Fully Bolted Body. Multi Footprint options. Metal; 2 PT. & DIN Flange. Plastic: DIN Flanges Only Wetted Body Material Options; Aluminium, Cast Iron, Stainless Steel. PPG. PVDF. Diaphragm / Check Valve Materials: PTFE. CR. EDPM. NBR. TPEE. TPO. FPM. Certification: CE. ATEX FDA (SUS Models) Common Pump Options: High Pressure Pumps (HP) Powder Pump (PDR) FDA Pumps (FDA) 316 SS PARABOLIC GUIDES (S7) (removable / replaceable Guides) Santoprene Back Up Diaphragms for PTFE Fitted Pumps (SB) Electro Polish SUS Pumps (EP20) (TE) PTFE diaphragms with bonded rubber Backup Filter Regulator. Filter Regulator with Auto Drain. Filter Regulator Lubricator. High Performance Muffler. Speed Control Muffler. Destroke Cushions. Abrasion Pads. Carry Handles. Notes: New 2 Pumps with Extremely High Flow Rates & A New Robust & Compact Body Design. Available in all materials with both Flange and Threaded Connections. Completely Non-lubricated Shuttle Valve. Pumps can operate from Very Low up to Very High Air Pressures and have up to 25% Better Air Consumption compared to previous models. Same Footprint and same Dimensions matching many Competitors Similar Models. Suited to Both Start Stop & Fully Continuous pumping applications. Can easily handle High Heads and Very Long Discharge Lines. Also very good for Filter Press & other Dead Head type processes. Also available with NPT threaded connections. Flange models match both DIN and ANSI.
15 TC-X (TT) Series Special PTFE Diaphragm Pumps in Various Sizes Standard DFS Models: TC-X030TT TC-X050TT TC-X152TT TCX152TT-FL TC-X203TT TC-X203TT-FL TC-X253TT TC-X253TT-FL Liquid Flow Rates; 8.2 L/min L/min. 50 L/min 55 L/Min 150 L/min Connections: ¼ PT ¼ PT ½ PT & DIN ¾ PT & DIN 1 PT & DIN Check Valves: Flat Flat Ball Ball Ball 0 mm 0 mm 2 mm 2mm 3 mm Air Pressure Range: MPa (72 PSI) Special range of PTFE Pumps designed to transfer highly corrosive chemicals. Can also be used in Clean Room Type Chemical Transfer Processes such as in the manufacture of Semiconductors. Wetted Body Material; Standard Grade PTFE Diaphragm / Check Valve PTFE on all Models Materials: Certification: CE. Special Pump Options: TC-X152TT-SP pump with ¾ flange connections TC-X050TT-H High temperature model for Liquid temperatures up to 150 C Filter Regulator. Notes: Air Powered Self priming pumps. 100% PTFE/PFA Wetted Construction. Manufactured from Virgin PTFE. Highly Competitive Liquid Flow Rates. Compact Size and Fully Bolted Construction. New Looped C Air Motor Design Technology. (Pat. Pending) Competitive Air Consumption Compared to Previous Models. Lubrication Free Operation. Easy Repair and End-user maintainable. Liquid connections, ¼ ½ & 1, DIN Flange & PT Threaded Connections. Also available with NPT threaded and ANSI flange connections. TC-X152TT-FL TC-X050TT
16 NOTES Registered Names &Trademarks Looped C is a registered Trademark of YTS Co Ltd. SPILLSTOP, SENTRY & SENTINEL are registered trademarks of Blacoh Fluid Control. ONE-UP is a registered trademark of Garlock. Hytrel is a trademark of E.I. du Pont de Nemours and Company. Kynar is a registered trademark of Arkema. Nordel is a trademark of DuPont Dow Elastomers. Ryton is a trademark of Chevron Phillips Chemical Company. Santoprene is a registered trademark of Monsanto Co. Teflon is a trademark of E.I. du Pont de Nemours and Company. Viton is a registered trademark of DuPont Performance Elastomers. TPX is a registered trademark of Mitsui Chemicals. Changes Due to our continued commitment to product improvement, new models, model specifications and prices may change without notice. Product Availability Options, Variations Add On s and Accessories may not be available for all models sizes or materials. For information about the full Line Up, Prices, Availability and Delivery please contact your Pump Distributor directly. Suitability for application Pumps and accessories listed in this document are available in various sizes and materials. For each application please take extreme care with pump choice and always consider such factors as chemical compatibility of the pump body and internal wetted materials, solids size, abrasion resistance, temperature of the liquid, temperature of the surrounding atmosphere, airline or liquid line pressure etc. For more information on choosing the correct pump, please consult with your pump Distributor directly. International Export Control Please note that certain products listed within this document may be subject to international trade restrictions or trade embargoes and may therefore require an export permit prior to dispatch. Products may also require an export licence for reexport from any particular country. For more information regarding international export control regulations please contact Iwaki or contact your local authorities directly.
Air Powered Double Diaphragm Pumps. Polypropylene Pumps. Made In Japan
Air Powered Double Diaphragm Pumps Polypropylene Pumps Made In Japan Presenting YTS Double Diaphragm Pumps Made In Japan Fully Non-Lubricated Design High Flow Rates Efficient Air Consumption Easy & Fast
More informationAir Powered Double Diaphragm Pumps. Polypropylene Pumps. Made In Japan
Air Powered Double Diaphragm Pumps 2016 Polypropylene Pumps Made In Japan Presenting YTS Double Diaphragm Pumps Made In Japan Non-Lubricated Design High Flow Rates Efficient Air Consumption Easy & Fast
More informationNDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
More informationNDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
More informationDP Series Specifications
DP Series Specifications DP-10 Port Dimensions Intake & discharge connection: Polypropylene (PPG) Aluminum (ADC-12) Stainless Steel (316) (6 GPM Max.) 3/8" Female NPT 3/8" Female NPT 3/8" Female NPT DP-15
More informationAluminum Dimensions: 7.32" W 9.49"H Net Wt.: 7.9 lbs. (3.6 kg) Shipping Wt.: 9.9 lbs. Stainless Steel
DP Series Specifications DP-10 Port Dimensions (6 GPM Max.) Intake & discharge connection: Polypropylene (PPG) 3/8" Female NPT Aluminum (ADC-12) 3/8" Female NPT Stainless Steel (316) 3/8" Female NPT DP-15
More informationTC-X PRODUCT GUIDE AIR POWERED DOUBLE DIAPHRAGM PUMPS
TC-X 2018 PRODUCT GUIDE AIR POWERED DOUBLE DIAPHRAGM PUMPS Diaphragm Pump Characteristics Air Powered Double Diaphragm Pumps Manufactured in Japan with Superior Quality & Finish. Designed for High Performance
More informationYamada America, Inc. 955 East Algonquin Road Arlington Heights, Illinois Toll-Free Phone Fax
Yamada America, Inc. 955 East Algonquin Road Arlington Heights, Illinois 60005 800 990-7867 Toll-Free 847 631-9200 Phone 847 631-9273 Fax E-mail: sales@yamadapump.com Web: www.yamadapump.com The Yamada
More informationMeet Yamada... TABLE OF CONTENTS
Table of Contents Meet Yamada... The Yamada Corporation has been a leading producer of industrial equipment since 195, and of fluid handling products for over years. As a pioneer of pumping technology,
More informationYamada America, Inc. 955 E. Algonquin Road Arlington Heights, IL Toll-Free Phone Fax
Yamada America, Inc. 955 E. Algonquin Road Arlington Heights, IL 65 8 99-7867 Toll-Free 847 631-92 Phone 847 631-9273 Fax E-mail: sales@yamadapump.com Web: www.yamadapump.com The Yamada Corporation has
More informationCustomer Service Product Training Research & Development Parts and Service for All Yamada Pumps Application Engineering Industry Knowledge
The Yamada Corporation has been a leading producer of industrial equipment since 195, and of fluid handling products for over 6 years. As a pioneer of pumping technology, Yamada is known in many industries
More informationE8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions Polypropylene SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
More informationTranquilizer. Surge Suppression for Air-Driven Diaphragm Pumps. Visit our website!
Quality System ISO9001 Certified Environmental Management Systems ISO14001 Certified Tranquilizer Surge Suppression for Air-Driven Diaphragm Pumps Virtually surge-free flows Steadier pressures Less vibration
More informationE1 1" Bolted Plastic Pumps With Metallic Center Sections Operating Instructions
E1 1" Bolted Plastic Pumps With Metallic Center Sections Operating Instructions E1 Polypropylene E1 Kynar E1 1" Bolted Plastic Pump Optional Side Ports 8.06 [204.7] 1" ANSI 150# / DIN Fluid Discharge
More informationVersa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar
Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
More informationUltra-Matic Air Valve System
Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.
More informationHigh-Performance Air-Powered Double Diaphragm Pumps
www.yamadacorp.co.jp/global High-Performance Air-Powered Double Diaphragm Pumps About Yamada... Yamada Corporation International Department No.1-3, 1-Chome, Minami-Magome, Ohta-ku,Tokyo 143-8504, Japan
More informationHusky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
More informationOPERATION MANUAL. ALUMINUM Models DUCTILE Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS
OPERATION MANUAL 3 METALLIC PUMP (CLAMPED) PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF80 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models DUCTILE Models 316 S.S. Models A JDA Global Company CAUTIONS - READ
More informationD 40 ALUMINIUM (CLAMPED)
www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start
More informationAIR OPERATED DOUBLE DIAPHRAGM PUMP
DF5 Metallic pumps 3 For fluid transfer and distribution systems. 5 l/min, 14 US gpm 1/2 fluid port. Very robust construction, the pump is fully enclosed in an aluminum shield. Lubricants, waste oil, antifreeze,
More informationADVANCED FLUID MANAGEMENT SOLUTIONS. Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI GARANZIA WARRANTY.
ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 ANNI DI 5 YEARS WARRANTY GARANZIA Made In Italy Industrial piston pumps TECHNICAL CHARACTERISTICS Strength points
More information3" Elima-Matic Pumps. Air-Operated Double Diaphragm Pumps
3" Elima-Matic Pumps Air-Operated Double Diaphragm Pumps Bulk Chemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker Car Unloading 3" Elima-Matic Pumps
More informationHEAVY DUTY FLAP VALVE PUMPS For Fluids Containing up to Line Size Solids
HEAVY DUTY FLAP VALVE PUMPS For Fluids Containing up to Line Size Solids A WARREN RUPP, INC. BRAND SANDPIPERPUMP.COM KEY ADVANTAGES OF SANDPIPER FLAP VALVE PUMPS AN IDEAL SOLUTION FOR ABRASIVE SLURRIES,
More informationINDUSTRIAL DYEING PUMPS
INDUSTRIAL DYEING PUMPS ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI WARRANTY GARANZIA Made In In Italy HELP THE NATURE Packaging contains, depending
More informationWARNING CAUTION. CAUTION Do not exceed 120 psig (8.3 bar) air-inlet pressure.
13966-100-BP SAFETY MANUAL READ FIRST! IMPORTANT: READ THESE WARNINGS AND SAFETY PRECAUTIONS PRIOR TO INSTALLATION OR OPER- ATION. FAILURE TO COMPLY WITH THESE INSTRUC- TIONS COULD RESULT IN PERSONAL INJURY
More informationD 25 POLYPROPYLENE (BOLTED)
www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start
More informationHusky 716 Metal Pumps Air-Operated Double-Diaphragm
Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled
More informationINSTRUCTION MANUAL AD SERIES PULSATION DAMPENERS
Form No. MAD021 INSTRUCTION MANUAL AD SERIES PULSATION DAMPENERS To insure safety, be sure to carefully read instruction manual prior to operation. Keep instruction manual in a easily accessible location.
More informationAIR OPERATED DIAPHRAGM PUMPS
AIR OPERATED DIAPHRAGM PUMPS BULLETIN P-605 R JAN. 05 PUMP ANYTHING THAT CAN POUR SAFELY AND RELIABLY Wide selection of materials: SS - 36 stainless steel AL - Aluminum NSS - Conductive nylon ¼" - 2" sizes
More informationOPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 2 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 50 BOLTED. A JDA Global Company
OPERATION MANUAL 2 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 50 BOLTED AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company CAUTIONS - READ FIRST CAUTION: Do not apply compressed air
More informationOPERATION MANUAL. ALUMINUM Models DUCTILE Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS
OPERATION MANUAL 2 METALLIC PUMP (CLAMPED) PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF50 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models DUCTILE Models 316 S.S. Models A JDA Global Company CAUTIONS - READ
More informationOPERATION MANUAL 1 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM
OPERATION MANUAL 1 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the exhaust port pump will not function. CAUTION: Do not exceed 82
More informationElectric Diaphragm Pumps
Electric Diaphragm Pumps 1" and 2" Electric Operated Double Diaphragm Pumps for industrial, food, beverages and cosmetic applications Not just an electric double diaphragm pump, it s much more! The only
More informationHusky 515 / 716 Air-Operated Diaphragm Pumps
First choice when quality counts. Husky 515 / 716 Air-Operated Diaphragm Pumps 515 1/2 in. non-metallic pumps in acetal, polypropylene, and kynar 716 3/4 in. metal pumps in SST, aluminum No seals to leak
More informationE1 Bolted Pump Specifications End Ported Dimensions
OPERATING INSTRUCTIONS 1" Elima-Matic Bolted Pump Characteristics Adjustable Flow Rate Rugged Diaphragms. 0 to 8.5 m 3 /hr (0-37 gpm) Teflon Diaphragms...0 to 6.8 m 3 /hr (0-30 gpm) Pump Connections Suction....1
More informationA measured step forward
A measured step forward Operations & Maintenance Manual TM AODD 1/2 Air Operated Double Diaphragm Pump 2 Phone: (585) 426-0990 www.lutzjescoamerica.com Fax: (585) 426-4025 Contents Cautions Read First!...4
More informationEXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330
More informationE3 3" Bolted Metallic Pumps Operating Instructions
E3 3" Bolted Metallic Pumps Operating Instructions E3 Stainless Steel E3 Hastelloy C E3 Aluminum SPECIFICATIONS AND PERFORMANCE Versa-Matic Model E3 Bolted 3" Pump Flow Rate Adjustable to...... 0-230 gpm
More informationOPERATION MANUAL.25 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM
OPERATION MANUAL.25 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the exhaust port pump will not function. CAUTION: Do not exceed 79 C (174
More informationOPERATOR S MANUAL A
OPERATOR S MANUAL 670144-A INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 12-18-15 1/4" DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) (REV: A) 67 0144-A READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
More informationEXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST A025-SQ*-****-*** BOX PLASTIC 16 PARTS LIST - BOX PLASTIC A025-SQ*-****-*** 1 LEFT MANIFOLD 1 A025-SQP-****-*** 10503-40 Polypropylene A025-SQY-****-*** 10503-46 Conductive
More informationA200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting SPECIFICATIONS
More informationOPERATION MANUAL 2 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM
OPERATION MANUAL 2 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the exhaust port pump will not function. CAUTION: Do not exceed 82
More informationA200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting 2 STAINLESS
More informationOPERATION MANUAL. ALUMINUM Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS .5 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 15
OPERATION MANUAL.5 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 15 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company 2 CAUTIONS - READ FIRST CAUTION: Do not
More informationOPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 3 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 80. A JDA Global Company
OPERATION MANUAL 3 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 80 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the
More information...your single dedicated resource for cost-effective mine pumping solutions. For Rugged Mining Duty
...your single dedicated resource for cost-effective mine pumping solutions For Rugged Mining Duty Mine Face Dewatering Fuel Transfer Sump Transfer Muck/Slimes/Slurry Drift Dewatering Drillers Mud Dewater
More information1-1/2 DIAPHRAGM PUMP 1:1 RATIO (METALLIC)
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 1-1/2 DIAPHRAGM PUMP 1:1 RATIO (METALLIC) 66615X-X-C RELEASED: 5-31-88 REVISED: 1-2-07 (REV. X) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
More informationAODD PUMPS FOR YOUR MOST SEVERE APPLICATIONS
AODD PUMPS FOR YOUR MOST SEVERE APPLICATIONS HEAVY DUTY FLAP VALVE PUMP HEAVY DUTY BALL VALVE PUMP CONTAINMENT DUTY BALL VALVE PUMP ENSURES YOUR SUCCESS SANDPIPER Signature Series AODD pumps are engineered
More informationOPERATOR S MANUAL
OPERATOR S MANUAL 164622 INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE RELEASED: 12-24-13 REVISED: 1-26-18 (REV: D) 1/2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) 164631, 164633, 164635, 164637 and 161586
More informationSERVICE KITS PUMP DATA MODEL DESCRIPTION CHART 6662A3-XXX-C 6662X X X X X C INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED:
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 5-3-88 REVISED: 10-28-16 (REV: V) 2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING
More informationDIAPHRAGM PUMPS 3 NON-METALLIC PUMP MODEL
DIAPHRAGM PUMPS 3 NON-METALLIC PUMP MODEL EXP Series 3 Non-Metallic Diaphragm Pump ARO EXP Series diaphragm pumps now include new 3 non-metallic models available in polypropylene or PVDF. The NEW 3 non-metallic
More informationProcess Equipment. Air-Operated Pumps for Process Industries
Process Equipment Air-Operated s for Process Industries Superior ing Technology 55 Gallon Drum Transfer and Supply from your 55 gallon drums with our double diaphragm or piston evacuation pumps. They offer
More informationPUMPS Bulk Chemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker Car Unloading
olted Plastic olted Metallic lamped Metallic E3 TREE IN PUMPS ulk hemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker ar Unloading When you need to pump
More informationHigh Purity PTFE Pumps
Air-Operated Double-Diaphragm High Purity Pumps www.yamadacorp.co.jp/global The Yamada Advantage When it comes to quality, performance and reliability, thereʼs no better value in high-purity pumps than
More informationSERVICE KITS PUMP DATA MODEL DESCRIPTION CHART INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: X X - X X X - C
OPERATOR S MANUAL 666300-XXX-C INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 3-13-06 REVISED: 10-28-16 (REV: K) 3" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
More informationPUMP OPERATIONS & MAINTENANCE MANUAL A050-1/2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP. *Coming Soon all-flo.com
PUMP OPERATIONS & MAINTENANCE MANUAL * A050-1/2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP *Coming Soon TABLE OF CONTENTS SECTION 1 WARNINGS AND SAFETY PRECAUTIONS 3 SECTION 2 MODEL DESIGNATION MATRIX 4-5
More informationVersa-Matic Pump Company Model E4, Elima-Matic Metallic Pump Parts List (revised 2/08) Item Description Qty E4BA Screen Mount Aluminum* E4AA Foot Mount Aluminum Pump Model Number E4CA Foot Mount Cast Iron
More information3" DIAPHRAGM PUMP SERVICE KITS PUMP DATA MODEL DESCRIPTION CHART INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED:
OPERATOR S MANUAL 666300-XXX-C INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 3-13-06 REVISED: 7-27-15 (REV. J) 3" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
More informationOPERATOR S MANUAL
OPERATOR S MANUAL 1604622 INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 12-24-13 REVISED: 3-03-14 (REV. B) READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.
More information3 DIAPHRAGM PUMP 1:1 RATIO (METALLIC)
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 3 DIAPHRAGM PUMP 1:1 RATIO (METALLIC) PD30R-X-X-C PE30R-X-X-C RELEASED: 2-4-05 REVISED: 3-2-07 (REV. 04) READ THIS MANUAL CAREFULLY BEFORE
More informationAir Driven Double Diaphragm Pumps
Air Driven Double Diaphragm Pumps The BEST Diaphragm Pumps in the World! ABOUT ALL-FLO ALL-FLO is committed to the pursuit of designing and manufacturing the highest quality product available to industry.
More informationAIR-DRIVEN DOUBLE DIAPHRAGM PUMPS
-DRIVEN DOUBLE DIAPHRAGM PUMPS THE BEST DIAPHRAGM PUMPS IN THE WORLD ABOUT ALL-FLO ALL-FLO is committed to the pursuit of designing and manufacturing the highest quality product available to industry.
More informationWARNING CAUTION. CAUTION Do not exceed 120 psig (8.3 bar) air-inlet pressure.
13966-300-BM SAFETY MANUAL READ FIRST! IMPORTANT: READ THESE WARNINGS AND SAFETY PRECAUTIONS PRIOR TO INSTALLATION OR OPER- ATION. FAILURE TO COMPLY WITH THESE INSTRUC- TIONS COULD RESULT IN PERSONAL INJURY
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationPUMP OPERATIONS & MAINTENANCE MANUAL A050-1/2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
PUMP OPERATIONS & MAINTENANCE MANUAL A050-1/2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP TABLE OF CONTENTS SECTION 1 WARNINGS, DANGERS AND CAUTIONS 3 SECTION 2 MODEL DESIGNATION MATRIX & REPAIR KITS 4-5 SECTION
More informationE4 1-1/2" Bolted Metallic Pumps Specifications and Performance
E4 1-1/2" Bolted Metallic Pumps Specifications and Performance SPECIFICATIONS E4 PERFORMANCE Determined by actual flow meter tests. E4 FLOW RATE (Adjustable)... 0-72 gpm (0-275 lpm) PORT SIZE Inlet and
More informationFluid Dispensing Systems
Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028
More informationAD Series. Air Diaphragm Pumps. Air Diaphragm Pumps. Extensive stock holdings Australia-wide.
AD Series Air Diaphragm Pumps Air Diaphragm Pumps Extensive stock holdings Australia-wide www.aquapluspumps.com.au Operating Principle Aquaplus Air Diaphragm Pumps are operated by compressed air or any
More informationE1 Bolted Pump Specifications End Ported Dimensions
OPERATING INSTRUCTIONS 1" Elima-Matic Bolted Pump Characteristics Adjustable Flow Rate Rugged Diaphragms. 0 to 8.5 m 3 /hr (0-37 gpm) Teflon Diaphragms...0 to 6.8 m 3 /hr (0-30 gpm) Pump Connections Suction....1
More informationEXPERT SERIES AIR OPERATED DIAPHRAGM PUMPS 1/4 THROUGH 3 FLUID PORTS
EXPERT SERIES AIR OPERATED DIAPHRAGM PUMPS 1/4 THROUGH 3 FLUID PORTS ARO Air Operated Diaphragm Pumps With proven performance in the field and backed by an industry leading 5-year warranty, ARO air operated
More informationAir-Operated Double-Diaphragm. High Purity PTFE Pumps
Air-Operated Double-Diaphragm High Purity PTFE Pumps ULTRA High-Purity Series Ultra-High Purity Series was designed specifically for the Semiconductor Yamada s advantages come from years process of experience
More informationProMinent Beta Solenoid Diaphragm Metering Pumps
Overview: Beta Ideal for basic chemical feed applications (see page 127 for spare parts, page 138 for accessory kits and page 138 for control cables) ProMinent pk_1_004_1 Capacity range 0.2-8.4 gph, 232-29
More informationF20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationPE30R-XXX-XXX-C RELEASED: REVISED: (REV. 07) 3" DIAPHRAGM PUMP
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 3" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) PD30R-XXX-XXX-C PE30R-XXX-XXX-C RELEASED: 2-4-05 REVISED: 11-17-10 (REV. 07) READ THIS MANUAL CAREFULLY
More information1/2" AIR DRIVEN DIAPHRAGM PUMP
1/2" DRIVEN DIAPHRAGM PUMP OPERATION AND SERVICE GUIDE O-1225D NOV. 2008 Page 1 of 6 Refer to Bulletin P-605, Parts List P-9151 DRIVEN, DOUBLE DIAPHRAGM PUMP MANUAL Congratulations on purchasing one of
More informationSAFETY MANUAL READ FIRST!
966-05-XX SAFETY MANUAL READ FIRST! IMPORTANT: READ THESE WARNINGS AND SAFETY PRECAUTIONS PRIOR TO INSTALLATION OR OPER- ATION. FAILURE TO COMPLY WITH THESE INSTRUC- TIONS COULD RESULT IN PERSONAL INJURY
More informationPUMP OPERATIONS & MAINTENANCE MANUAL
PUMP OPERATIONS & MAINTENANCE MANUAL A150-1-1/2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP TABLE OF CONTENTS SECTION 1 WARNINGS, DANGERS AND CAUTIONS 3 SECTION 2 MODEL DESIGNATION MATRIX 4-6 SECTION 3 PRINCIPLES
More informationD/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
More informationPUMP OPERATIONS & MAINTENANCE MANUAL S050-1/2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
PUMP OPERATIONS & MAINTENANCE MANUAL S050-1/2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP TABLE OF CONTENTS SECTION 1 WARNINGS, DANGERS AND CAUTIONS 3 SECTION 2 MODEL DESIGNATION MATRIX 4-5 SECTION 3 PRINCIPLES
More informationAir Operated Double Diaphragm Pump. M-Pump ½ Metallic Non Metallic Pump INSTALLATION, OPERATION & MAINTENANCE MANUAL
Air Operated Double Diaphragm Pump M-Pump ½ Metallic Non Metallic Pump INSTALLATION, OPERATION & MAINTENANCE MANUAL 0.5 I.O.M rev 05. 12/2015 INDEX Title Section Introduction.1 Safety.2 Warranty, General
More informationAIR VALVE No-lube, no-stall design. SOLIDS-HANDLING Up to.71 in. (18mm)
B75 Non-Metallic Design Level 2 Ball Valve Air-Powered Double-Diaphragm Pump Air Exhaust Side View Air Inlet Side View ENGINEERING, PERFORMANCE & CONSTRUCTION DATA INTAKE/DISCHARGE PIPE SIZE 3" ANSI Flange
More informationIdentity code: Meta MTMa Diaphragm Metering Pumps Series: Meta diaphragm-type metering pump Version a
Identity code: Meta MTMa Diaphragm Metering Pumps MTMa Series: Meta diaphragm-type metering pump Version a H A Main drive Add-on drive Pump version: New Cross Reference Conversion Table from former version
More informationAir Inlet/ Discharge Port
Metering Pumps The ProMinent is a pneumatically-actuated metering pump with a capacity in the 0.1 to 3.9 gph (0.24 to 14.8 l/h) range at maximum backpressures of 21 to 232 psig (0.9 to 16 bar). The consists
More information3 DIAPHRAGM PUMP 1:1 RATIO (METALLIC)
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 3 DIAPHRAGM PUMP 1:1 RATIO (METALLIC) PD30X-X-X-C PE30X-X-X-C RELEASED: 2-9-05 REVISED: 3-5-07 (REV. 04) READ THIS MANUAL CAREFULLY BEFORE
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationSERVICE KITS PUMP DATA INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE RELEASED: XX-XXX-C. Figure 1. RELEASED 13/Nov/ :24:02 GMT
OPERATOR S MANUAL 66610X-X-C INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE RELEASED: 8-24-89 REVISED: 10-26-18 (REV: AK) 1 DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
More informationPUMP OPERATIONS & MAINTENANCE MANUAL A100-1 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP. all-flo.com
PUMP OPERATIONS & MAINTENANCE MANUAL A100-1 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP TABLE OF CONTENTS SECTION 1 WARNINGS, DANGERS AND CAUTIONS 3 SECTION 2 MODEL DESIGNATION MATRIX 4-5 SECTION 3 PRINCIPLES
More information1/2" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 1/2" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) PD05X-XXX-XXX-B PE05X-XXX-XXX-B RELEASED: 8-27-08 REVISED: 5-28-10 (REV. 07) READ THIS MANUAL
More informationOPERATOR S MANUAL PD20P-X-X PE20P-X-X RELEASED: REVISED: (REV: N) 2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC)
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) PD20P-X-X PE20P-X-X RELEASED: 12-16-02 REVISED: 10-28-16 (REV: N) READ THIS MANUAL CAREFULLY
More informationPUMP OPERATIONS & MAINTENANCE MANUAL
We pump solutions PUMP OPERATIONS & MAINTENANCE MANUAL A025 - SPX PLASTIC 1/4 INCH DIAPHRAGM PUMP TABLE OF CONTENTS SECTION 1 WARNINGS, DANGERS AND CAUTIONS 3 SECTION 2 MODEL DESIGNATION MATRIX & REPAIR
More informationDIAPHRAGM PUMPS ENTIRELY IN POLYPROPYLENE. Made in Italy. No. E15/PPB
DIAPHRAGM PUMPS ENTIRELY IN POLYPROPYLENE Made in Italy No. E15/PPB HELP THE NATURE Packaging contains, depending on the articles, one or more of the following materials; they must be recycled in accordance
More information2" DIAPHRAGM PUMP SERVICE KITS PUMP DATA MODEL DESCRIPTION CHART INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED:
OPERATOR S MANUAL 666250-XXX-C INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 3-13-06 REVISED: 5-5-10 (REV. 07) 2" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
More informationSpray Pressure Control Manifold
Instruction Sheet P/N 0870G0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
More informationSolutions Applications
Expert Solutions for Critical Applications FIT Bolted Metal Brand Portfolio Where Innovation Flows wildenpump.com FIT BOLTED METAL PUMPS Wilden: The Power Behind Fluid Transfer As the global leader in
More informationVIKING. Viking Mag Drive Series 855. Ideal for: Hard-to-Seal Liquids 24/7 Operations Hazardous and Toxic Liquids
Viking Mag Drive Series 855 VIKING Ideal for: Hard-to-Seal Liquids 24/7 Operations Hazardous and Toxic Liquids Capacity to 29.5 M 3 /Hr (130 GPM) Pressure to 14 Bar (200 PSI) Viscosity to 55,000 cst (250,000
More information3/8 DIAPHRAGM PUMP 1:1 RATIO, NON-METALLIC
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 3/8 DIAPHRAGM PUMP 1:1 RATIO, NON-METALLIC PD03P-XXX-XXX RELEASED: 12-17-05 REVISED: 9-23-08 (REV. 03) READ THIS MANUAL CAREFULLY BEFORE
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More information